Aluminium alloys in nuclear
•Download as PPTX, PDF•
2 likes•2,241 views
This document discusses the use of aluminum alloys in the nuclear industry. It lists some key properties that make aluminum alloys suitable for use in nuclear reactors, such as mechanical strength, heat transfer properties, structural integrity, corrosion resistance, and compatibility. It also mentions some of the ways aluminum alloys are used in nuclear reactors, including as a fuel element, cladding material, and corrosion resistant material.
Report
Share
Report
Share
Recommended
03 magnesium and magnesium alloys
The document provides information on the production, properties, and applications of magnesium and magnesium alloys. It discusses the various extraction methods for magnesium including calcination, the Pidgeon process, and the Dow process. It also outlines casting techniques for magnesium alloys such as die casting, squeeze casting, and thixocasting, and describes approaches for grain refinement.
High temperature materials & super alloys ppt
This document discusses superalloys, which are metallic alloys that exhibit excellent strength and creep resistance at high temperatures. It describes how superalloys develop strength through solid solution strengthening and alloying techniques. The document also classifies superalloys into generations based on their composition, and lists some of their key properties and applications in gas turbines, jet engines, steam turbines, and other high-temperature industrial systems.
Nickel base superalloys
1. The document discusses nickel-based superalloys, which are metallic alloys developed to withstand high temperatures, often up to 70% of their absolute melting temperature. They have excellent creep, corrosion, and oxidation resistance.
2. Key features of nickel-based superalloys include a two-phase microstructure of gamma (γ) and gamma-prime (γ') phases that strengthen the alloy. Precipitation of γ' particles and formation of carbides at grain boundaries further increase the alloy's strength at high temperatures.
3. Alloying elements such as aluminum, titanium, and niobium promote the formation of γ' precipitates while chromium, molybdenum, and tung
Aluminium and its alloys
This document provides an overview of a lecture on aluminium alloys. It discusses the subjects that will be covered, including the production, properties, and applications of aluminium alloys. The production of aluminium is explained, outlining the Bayer process and Hall–Héroult process. The physical properties of aluminium are presented. Methods of extracting aluminium from bauxite and other sources are summarized.
Heat treatment process for steel
The document discusses various heat treatment processes. It defines heat treatment as operations involving heating and cooling of metals/alloys in their solid state to obtain desirable properties. It describes the stages of heat treatment as heating, soaking, and cooling. It then discusses various heat treatment processes like annealing, normalizing, hardening, and tempering in detail including their purposes, methods, and effects on material properties.
A STUDY ON MECHANICAL PROPERTIES OF ALUMINUM 6063 BASED HYBRID COMPOSITES
The document discusses a study on the mechanical properties of aluminium 6063-based hybrid composites reinforced with silicon carbide and graphite particles. The objectives are to study the tensile strength and hardness of the composites and correlate these properties with the amount of graphite added. Aluminium 6063 was chosen as the matrix material due to its medium strength, good toughness and corrosion resistance. Silicon carbide and graphite particles were used as reinforcements to improve hardness, wear resistance and provide self-lubrication respectively. Composites with varying graphite content were fabricated using stir casting and tested for hardness and tensile strength after heat treatment. Results showed that hardness and tensile strength increased with increasing graphite
Study Of Bleeding Breakout In Thin Slab Caster
This documentation deals with the all the processes and sub-processes undergoing in the newly installed department in Tata Steel ,i.e., LD3 & TSCR, mainly focussing on "Bleeding Breakout" problem in TSCR shop.
Pig iron.pdf
This document describes an experimental study comparing high purity pig iron produced from steel scrap to Sorelmetal®, which is commonly used for ductile iron production. Steel scrap was melted in an electrical arc furnace along with graphite as a carbon source to produce pig iron samples. The chemical compositions and microstructures of the samples were analyzed and found to be similar to Sorelmetal® in terms of carbon content, structure, and graphite size distribution. The results indicate that the method of producing pig iron from steel scrap is a promising alternative to using Sorelmetal®.
Recommended
03 magnesium and magnesium alloys
The document provides information on the production, properties, and applications of magnesium and magnesium alloys. It discusses the various extraction methods for magnesium including calcination, the Pidgeon process, and the Dow process. It also outlines casting techniques for magnesium alloys such as die casting, squeeze casting, and thixocasting, and describes approaches for grain refinement.
High temperature materials & super alloys ppt
This document discusses superalloys, which are metallic alloys that exhibit excellent strength and creep resistance at high temperatures. It describes how superalloys develop strength through solid solution strengthening and alloying techniques. The document also classifies superalloys into generations based on their composition, and lists some of their key properties and applications in gas turbines, jet engines, steam turbines, and other high-temperature industrial systems.
Nickel base superalloys
1. The document discusses nickel-based superalloys, which are metallic alloys developed to withstand high temperatures, often up to 70% of their absolute melting temperature. They have excellent creep, corrosion, and oxidation resistance.
2. Key features of nickel-based superalloys include a two-phase microstructure of gamma (γ) and gamma-prime (γ') phases that strengthen the alloy. Precipitation of γ' particles and formation of carbides at grain boundaries further increase the alloy's strength at high temperatures.
3. Alloying elements such as aluminum, titanium, and niobium promote the formation of γ' precipitates while chromium, molybdenum, and tung
Aluminium and its alloys
This document provides an overview of a lecture on aluminium alloys. It discusses the subjects that will be covered, including the production, properties, and applications of aluminium alloys. The production of aluminium is explained, outlining the Bayer process and Hall–Héroult process. The physical properties of aluminium are presented. Methods of extracting aluminium from bauxite and other sources are summarized.
Heat treatment process for steel
The document discusses various heat treatment processes. It defines heat treatment as operations involving heating and cooling of metals/alloys in their solid state to obtain desirable properties. It describes the stages of heat treatment as heating, soaking, and cooling. It then discusses various heat treatment processes like annealing, normalizing, hardening, and tempering in detail including their purposes, methods, and effects on material properties.
A STUDY ON MECHANICAL PROPERTIES OF ALUMINUM 6063 BASED HYBRID COMPOSITES
The document discusses a study on the mechanical properties of aluminium 6063-based hybrid composites reinforced with silicon carbide and graphite particles. The objectives are to study the tensile strength and hardness of the composites and correlate these properties with the amount of graphite added. Aluminium 6063 was chosen as the matrix material due to its medium strength, good toughness and corrosion resistance. Silicon carbide and graphite particles were used as reinforcements to improve hardness, wear resistance and provide self-lubrication respectively. Composites with varying graphite content were fabricated using stir casting and tested for hardness and tensile strength after heat treatment. Results showed that hardness and tensile strength increased with increasing graphite
Study Of Bleeding Breakout In Thin Slab Caster
This documentation deals with the all the processes and sub-processes undergoing in the newly installed department in Tata Steel ,i.e., LD3 & TSCR, mainly focussing on "Bleeding Breakout" problem in TSCR shop.
Pig iron.pdf
This document describes an experimental study comparing high purity pig iron produced from steel scrap to Sorelmetal®, which is commonly used for ductile iron production. Steel scrap was melted in an electrical arc furnace along with graphite as a carbon source to produce pig iron samples. The chemical compositions and microstructures of the samples were analyzed and found to be similar to Sorelmetal® in terms of carbon content, structure, and graphite size distribution. The results indicate that the method of producing pig iron from steel scrap is a promising alternative to using Sorelmetal®.
Non ferrous alloy
This document discusses various metal alloys including brasses, bronzes, copper-nickel alloys, aluminium alloys, titanium alloys, and magnesium alloys. It provides information on their crystal structures, common alloying elements, properties, and applications. Key points covered include the different phases of brasses depending on zinc content, common types of bronzes and their compositions, and examples of important wrought and casting aluminium alloys.
Alloying elements
The document discusses the various alloying elements that are added to steel and their effects on steel properties. It describes the key alloying elements such as carbon, chromium, silicon, manganese, and nickel. Carbon increases hardness and strength when added to iron to make steel. Chromium increases hardenability and corrosion resistance. Silicon improves strength, elasticity, and acid resistance. Manganese increases strength at high temperatures. Nickel provides toughness and corrosion resistance. Other alloying elements discussed include vanadium, molybdenum, tungsten, aluminum, titanium, and boron. Each element affects the properties of steel in different ways such as increasing strength, hardness, corrosion resistance, or grain structure.
Effect of alloyes on mechanical properties
The document discusses the effects of alloying elements on the mechanical properties of steel. It explains that alloying elements are added to steel to change its properties and effectiveness. Some key effects of common alloying elements like carbon, manganese, chromium, nickel, and molybdenum are increasing hardness, strength, corrosion resistance, and the hardenability of steel. The percentages and effects of various alloying elements added to different types of steel are also outlined.
Superalloys
This document discusses superalloys, which are nickel, cobalt, or iron-based alloys that have excellent strength and corrosion resistance at high temperatures. It classifies superalloys based on their predominant metal, such as iron-based, cobalt-based, or nickel-based alloys. The document states that superalloys are commonly used in turbine blades for jet engines due to their high-temperature properties. They are also used in applications like industrial gas turbines, nuclear reactors, and heat exchangers.
Aluminium and its alloys
This document discusses aluminium and its alloys. Key points include:
- Aluminium is a lightweight metal that is abundant, corrosion resistant, and highly conductive. It is extracted from bauxite via electrolysis.
- Aluminium alloys include heat treatable alloys like duralumin that can be strengthened via precipitation hardening as well as non heat-treatable alloys.
- Common fabrication methods for aluminium include casting, rolling, extrusion, and welding. Various heat treatments can further influence the properties of aluminium alloys.
- Applications of aluminium alloys span transportation, infrastructure, packaging, and more due to its combination of properties like strength, conductivity, and corrosion resistance
Vacuum Arc Remelting Furnaces in Midhani
Vacuum Arc Remelting (VAR) Furnaces are not only strategic but also back-bone of the Midhani. Currently Mishani has 2 VARs, which are installed for serving different purposes. This technical presentation shows in very simple, how the VAR furnaces work and what are the differences among both of the VARs. Anyone with non-technical background and easily understand the complex concept of Vacuum Arc Remelting.
Aluminium and its alloy
This document provides information about aluminium and its alloys. It discusses that aluminium is a light, silvery-white metal that is the third most abundant element in the Earth's crust. It has a density of 2.7 g/cm3, making it about one third as dense as steel. Aluminium alloys have tensile strengths ranging from 70 to 700 MPa. The document also outlines common aluminium alloys like duralumin and y-alloy and their applications in transportation, cooking utensils, coins, and musical instruments.
Properties of aluminium
Aluminum is a silvery white metal that is a very good conductor of heat and electricity. It has a low specific weight of 2.7g/cm3, about one third that of steel, and is highly resistant to corrosion. Aluminum is 100% recyclable without any loss to its qualities, and maintains strength at high temperatures when alloyed.
Heat treatment of steels- I
This presentation gives a brief introduction to heat treatment of steels.
Keywords: Iron-carbon diagram, TTT curves, Annealing, Normalizing, Hardening, Tempering, Subzero treatment, Patenting
Heat treatment of Ferrous and Non ferrous Alloys
In this PPT, I have clearly explained in a conscise manner, about most of the heat treatment processes, including my personal notes. Some pictures are taken from web. Hope you like it. If there are any mistakes, I'm not responsible :P. Have fun. Enjoy.
Aluminum alloys cast and wrought
This document discusses aluminum alloys, including their types, heat treatment, and common alloying elements. It covers casting and wrought alloys, with casting alloys further divided based on their alloying elements like copper, silicon, magnesium, zinc, and tin. Heat treatable alloys can be strengthened through heat treatment to form precipitates, while non-heat treatable alloys rely on solid solution strengthening. Common alloying elements are discussed along with their effects on properties and example commercial alloys.
Presentation on Supper Alloys
This document discusses superalloys, which are metallic alloys that exhibit excellent mechanical strength and creep resistance at high temperatures. It describes the composition of common superalloys such as nickel, cobalt, and iron-based alloys. The key strengthening mechanisms in superalloys are solid solution strengthening and precipitation hardening using elements like titanium and aluminum. Major phases in nickel superalloys include the gamma, gamma-prime, and carbide phases. Properties of superalloys include high temperature strength and corrosion/oxidation resistance. Superalloys find applications in jet engines, nuclear reactors, and industrial gas turbines where they are used for components like turbine blades.
High temperature materials
This document discusses high temperature materials. It begins by noting that regular engineering materials are affected by changes in temperature, so special high temperature materials are used in high temperature conditions. These materials have properties like high temperature resistance, oxidation and corrosion resistance, and creep and fatigue strength. The document then describes some common types of high temperature materials, including iron-base alloys like low, medium, and high alloy steels, iron-chromium and iron-chromium-nickel casting alloys, and wrought iron alloys. It also discusses nickel-base alloys and refractory metals and alloys, which can withstand very high temperatures. Finally, it covers ceramics and metal ceramics, which have properties like heat
Classification of ferrous materials
Ferrous materials are metals that contain iron as their main constituent, such as pig iron, wrought iron, cast iron, and steel alloys. The document discusses the classification and properties of various ferrous materials. It describes low-carbon steel as having low hardness and cost with high ductility and machinability; medium-carbon steel as having medium strength and ductility; and high-carbon steel as having high hardness and strength with low ductility. Stainless steel is defined as a chromium alloy with corrosion resistance, high strength, and durability.
Magnesium and its alloys
This document summarizes information about magnesium and its alloys. It discusses the discovery of magnesium, its atomic structure and properties. It describes some common magnesium alloys like Mg-Al, Mg-Zn and Mg-Al-Sr alloys. It analyzes phase diagrams and microstructures of Mg-Al and Mg-Zn alloys. Applications of magnesium alloys in aerospace, automotive and other industries are highlighted. Corrosion behavior and effects of alloying elements on corrosion resistance are summarized. The document concludes with opportunities to further improve properties of magnesium alloys through alloying and processing.
INDUCTION HARDENING by Jeevan B M
Induction hardening is a process of hardening which is used to harden the particular or part to be required to be hardened. In this they used the faraday lows of induction.
Aluminium and it’s alloys
This document discusses the properties and applications of aluminum and its alloys. It outlines that aluminum is lightweight, corrosion resistant, and electrically and thermally conductive. However, in its pure form aluminum is soft and has a low melting point. The document then discusses how aluminum is commonly alloyed with other metals like copper, magnesium, and manganese to increase its strength and maximum operating temperature. These aluminum alloys have many applications in transportation, infrastructure, consumer goods, and oil and gas due to their high strength to weight ratio and corrosion resistance.
Aluminium
This document provides an overview of aluminium, including its discovery, properties, production processes, applications, grades, and the aluminium market. It discusses that aluminium is the third most abundant element in the Earth's crust. The production process involves mining bauxite ore, refining alumina, and smelting alumina into aluminium. Major applications include transportation, packaging, and construction. China is the leading producer and consumer of aluminium globally. The document also compares aluminium to steel, noting advantages such as aluminium's lighter weight and better corrosion resistance. It outlines both the benefits and limitations of aluminium, as well as recent developments and future aspects of the aluminium industry.
Heat treatment
Heat treatment involves heating and cooling metals and alloys to obtain desirable properties or conditions. It includes processes like annealing, normalizing, hardening, and tempering. Heat treatment can relieve stresses, improve machinability and ductility, and make structures more homogeneous.
Raw Material In Iron Making
Dear Readers,
In this presentation, I have tried to explain main raw material sources of iron making process. Also, with my experience, I have tried to give a concept about the plant engineering related to raw material. I hope that, this presentation will be helpful for young engineers. With this presentation they will get a broad idea about the raw material, based on which they can study more on the subject.
Regards,
Nirjhar.
Aluminium alloys
Aluminum alloys are commonly used in nuclear industries due to their desirable properties. They have good mechanical strength, heat transfer properties, and ductility. Aluminum alloys also exhibit thermal stability, structural integrity, and corrosion resistance. Within nuclear applications, aluminum alloys are used as fuel elements, cladding material, and corrosion resistant material due to their neutronic properties, irradiation stability, and compatibility within nuclear processes.
ALUMINIUM AS A BUILDING MATERIAL dissertation
This document outlines the chapters and contents of a dissertation on aluminium as a building material. It discusses the aim, hypothesis, objectives, and limitations of the study. The introduction provides an overview of the properties of aluminium, including its strength to weight ratio, corrosion resistance, conductivity, reflectivity, ductility, and recyclability. Aluminium is widely used in construction for windows, doors, roofing, cladding, and other applications due to its favorable properties. The document examines aluminium's history and emergence as a prominent building material in the 20th century.
More Related Content
What's hot
Non ferrous alloy
This document discusses various metal alloys including brasses, bronzes, copper-nickel alloys, aluminium alloys, titanium alloys, and magnesium alloys. It provides information on their crystal structures, common alloying elements, properties, and applications. Key points covered include the different phases of brasses depending on zinc content, common types of bronzes and their compositions, and examples of important wrought and casting aluminium alloys.
Alloying elements
The document discusses the various alloying elements that are added to steel and their effects on steel properties. It describes the key alloying elements such as carbon, chromium, silicon, manganese, and nickel. Carbon increases hardness and strength when added to iron to make steel. Chromium increases hardenability and corrosion resistance. Silicon improves strength, elasticity, and acid resistance. Manganese increases strength at high temperatures. Nickel provides toughness and corrosion resistance. Other alloying elements discussed include vanadium, molybdenum, tungsten, aluminum, titanium, and boron. Each element affects the properties of steel in different ways such as increasing strength, hardness, corrosion resistance, or grain structure.
Effect of alloyes on mechanical properties
The document discusses the effects of alloying elements on the mechanical properties of steel. It explains that alloying elements are added to steel to change its properties and effectiveness. Some key effects of common alloying elements like carbon, manganese, chromium, nickel, and molybdenum are increasing hardness, strength, corrosion resistance, and the hardenability of steel. The percentages and effects of various alloying elements added to different types of steel are also outlined.
Superalloys
This document discusses superalloys, which are nickel, cobalt, or iron-based alloys that have excellent strength and corrosion resistance at high temperatures. It classifies superalloys based on their predominant metal, such as iron-based, cobalt-based, or nickel-based alloys. The document states that superalloys are commonly used in turbine blades for jet engines due to their high-temperature properties. They are also used in applications like industrial gas turbines, nuclear reactors, and heat exchangers.
Aluminium and its alloys
This document discusses aluminium and its alloys. Key points include:
- Aluminium is a lightweight metal that is abundant, corrosion resistant, and highly conductive. It is extracted from bauxite via electrolysis.
- Aluminium alloys include heat treatable alloys like duralumin that can be strengthened via precipitation hardening as well as non heat-treatable alloys.
- Common fabrication methods for aluminium include casting, rolling, extrusion, and welding. Various heat treatments can further influence the properties of aluminium alloys.
- Applications of aluminium alloys span transportation, infrastructure, packaging, and more due to its combination of properties like strength, conductivity, and corrosion resistance
Vacuum Arc Remelting Furnaces in Midhani
Vacuum Arc Remelting (VAR) Furnaces are not only strategic but also back-bone of the Midhani. Currently Mishani has 2 VARs, which are installed for serving different purposes. This technical presentation shows in very simple, how the VAR furnaces work and what are the differences among both of the VARs. Anyone with non-technical background and easily understand the complex concept of Vacuum Arc Remelting.
Aluminium and its alloy
This document provides information about aluminium and its alloys. It discusses that aluminium is a light, silvery-white metal that is the third most abundant element in the Earth's crust. It has a density of 2.7 g/cm3, making it about one third as dense as steel. Aluminium alloys have tensile strengths ranging from 70 to 700 MPa. The document also outlines common aluminium alloys like duralumin and y-alloy and their applications in transportation, cooking utensils, coins, and musical instruments.
Properties of aluminium
Aluminum is a silvery white metal that is a very good conductor of heat and electricity. It has a low specific weight of 2.7g/cm3, about one third that of steel, and is highly resistant to corrosion. Aluminum is 100% recyclable without any loss to its qualities, and maintains strength at high temperatures when alloyed.
Heat treatment of steels- I
This presentation gives a brief introduction to heat treatment of steels.
Keywords: Iron-carbon diagram, TTT curves, Annealing, Normalizing, Hardening, Tempering, Subzero treatment, Patenting
Heat treatment of Ferrous and Non ferrous Alloys
In this PPT, I have clearly explained in a conscise manner, about most of the heat treatment processes, including my personal notes. Some pictures are taken from web. Hope you like it. If there are any mistakes, I'm not responsible :P. Have fun. Enjoy.
Aluminum alloys cast and wrought
This document discusses aluminum alloys, including their types, heat treatment, and common alloying elements. It covers casting and wrought alloys, with casting alloys further divided based on their alloying elements like copper, silicon, magnesium, zinc, and tin. Heat treatable alloys can be strengthened through heat treatment to form precipitates, while non-heat treatable alloys rely on solid solution strengthening. Common alloying elements are discussed along with their effects on properties and example commercial alloys.
Presentation on Supper Alloys
This document discusses superalloys, which are metallic alloys that exhibit excellent mechanical strength and creep resistance at high temperatures. It describes the composition of common superalloys such as nickel, cobalt, and iron-based alloys. The key strengthening mechanisms in superalloys are solid solution strengthening and precipitation hardening using elements like titanium and aluminum. Major phases in nickel superalloys include the gamma, gamma-prime, and carbide phases. Properties of superalloys include high temperature strength and corrosion/oxidation resistance. Superalloys find applications in jet engines, nuclear reactors, and industrial gas turbines where they are used for components like turbine blades.
High temperature materials
This document discusses high temperature materials. It begins by noting that regular engineering materials are affected by changes in temperature, so special high temperature materials are used in high temperature conditions. These materials have properties like high temperature resistance, oxidation and corrosion resistance, and creep and fatigue strength. The document then describes some common types of high temperature materials, including iron-base alloys like low, medium, and high alloy steels, iron-chromium and iron-chromium-nickel casting alloys, and wrought iron alloys. It also discusses nickel-base alloys and refractory metals and alloys, which can withstand very high temperatures. Finally, it covers ceramics and metal ceramics, which have properties like heat
Classification of ferrous materials
Ferrous materials are metals that contain iron as their main constituent, such as pig iron, wrought iron, cast iron, and steel alloys. The document discusses the classification and properties of various ferrous materials. It describes low-carbon steel as having low hardness and cost with high ductility and machinability; medium-carbon steel as having medium strength and ductility; and high-carbon steel as having high hardness and strength with low ductility. Stainless steel is defined as a chromium alloy with corrosion resistance, high strength, and durability.
Magnesium and its alloys
This document summarizes information about magnesium and its alloys. It discusses the discovery of magnesium, its atomic structure and properties. It describes some common magnesium alloys like Mg-Al, Mg-Zn and Mg-Al-Sr alloys. It analyzes phase diagrams and microstructures of Mg-Al and Mg-Zn alloys. Applications of magnesium alloys in aerospace, automotive and other industries are highlighted. Corrosion behavior and effects of alloying elements on corrosion resistance are summarized. The document concludes with opportunities to further improve properties of magnesium alloys through alloying and processing.
INDUCTION HARDENING by Jeevan B M
Induction hardening is a process of hardening which is used to harden the particular or part to be required to be hardened. In this they used the faraday lows of induction.
Aluminium and it’s alloys
This document discusses the properties and applications of aluminum and its alloys. It outlines that aluminum is lightweight, corrosion resistant, and electrically and thermally conductive. However, in its pure form aluminum is soft and has a low melting point. The document then discusses how aluminum is commonly alloyed with other metals like copper, magnesium, and manganese to increase its strength and maximum operating temperature. These aluminum alloys have many applications in transportation, infrastructure, consumer goods, and oil and gas due to their high strength to weight ratio and corrosion resistance.
Aluminium
This document provides an overview of aluminium, including its discovery, properties, production processes, applications, grades, and the aluminium market. It discusses that aluminium is the third most abundant element in the Earth's crust. The production process involves mining bauxite ore, refining alumina, and smelting alumina into aluminium. Major applications include transportation, packaging, and construction. China is the leading producer and consumer of aluminium globally. The document also compares aluminium to steel, noting advantages such as aluminium's lighter weight and better corrosion resistance. It outlines both the benefits and limitations of aluminium, as well as recent developments and future aspects of the aluminium industry.
Heat treatment
Heat treatment involves heating and cooling metals and alloys to obtain desirable properties or conditions. It includes processes like annealing, normalizing, hardening, and tempering. Heat treatment can relieve stresses, improve machinability and ductility, and make structures more homogeneous.
Raw Material In Iron Making
Dear Readers,
In this presentation, I have tried to explain main raw material sources of iron making process. Also, with my experience, I have tried to give a concept about the plant engineering related to raw material. I hope that, this presentation will be helpful for young engineers. With this presentation they will get a broad idea about the raw material, based on which they can study more on the subject.
Regards,
Nirjhar.
What's hot (20)
Similar to Aluminium alloys in nuclear
Aluminium alloys
Aluminum alloys are commonly used in nuclear industries due to their desirable properties. They have good mechanical strength, heat transfer properties, and ductility. Aluminum alloys also exhibit thermal stability, structural integrity, and corrosion resistance. Within nuclear applications, aluminum alloys are used as fuel elements, cladding material, and corrosion resistant material due to their neutronic properties, irradiation stability, and compatibility within nuclear processes.
ALUMINIUM AS A BUILDING MATERIAL dissertation
This document outlines the chapters and contents of a dissertation on aluminium as a building material. It discusses the aim, hypothesis, objectives, and limitations of the study. The introduction provides an overview of the properties of aluminium, including its strength to weight ratio, corrosion resistance, conductivity, reflectivity, ductility, and recyclability. Aluminium is widely used in construction for windows, doors, roofing, cladding, and other applications due to its favorable properties. The document examines aluminium's history and emergence as a prominent building material in the 20th century.
Static and dynamic analysis of al 7075
This document discusses static and dynamic analysis of Al-alloy-7075 composite material with different manufacturing systems. It begins with an abstract describing how damping capacity is important for structural materials to eliminate damage from mechanical vibration. Aluminum composites play a significant role as lightweight machine components. The study aims to analyze the vibration characteristics and modal behavior of different aluminum alloy compositions using finite element analysis (FEA) software. After design and analysis, the most suitable manufacturing process will be selected for each material based on their individual physical properties. Cad and cae tools like Creo and Ansys will be used.
8
The document discusses the process of aluminum mining, processing, smelting, alloying and casting. It describes how bauxite is mined and processed into alumina, which is then smelted to produce molten aluminum. The molten aluminum can be cast into ingots or logs, and further processed by extruding or casting into final products. It also outlines some key properties of aluminum like its light weight, strength, corrosion resistance and recyclability.
Non ferrous al alloy
This document discusses non-ferrous alloys such as aluminum, copper, magnesium, titanium, and nickel alloys. It notes the limitations of ferrous alloys like steel including their relatively high density, low electrical conductivity, and susceptibility to corrosion. As such, non-ferrous alloys with more suitable properties are advantageous for many applications. Specifically, it covers aluminum alloys in detail, describing their classifications, properties like low density and corrosion resistance, strengthening mechanisms, and applications in various sectors like transportation and construction.
Aluminium Ppt
This document discusses the uses of aluminum in building construction. It begins with an introduction to aluminum, including its history, properties, and production. It then outlines various applications of aluminum in buildings, such as for external and internal components, equipment, industrial structures, prefabricated buildings, and finishes. The document concludes by noting aluminum's prevalence in the construction industry due to its light weight, corrosion resistance, workability, and recyclability.
Aluminium Ppt
This document discusses the uses of aluminum in building construction. It begins with an introduction to aluminum, including its history, properties, and production. It then outlines various applications of aluminum in buildings, such as for external and internal components, equipment, industrial structures, prefabricated buildings, and finishes. The document concludes by noting aluminum's prevalence in the construction industry due to its light weight, corrosion resistance, workability, and recyclability.
Examples for materials with its properties
The document summarizes the properties and common uses of various materials, including metals and non-metals. It describes aluminum as a light white metal used in airplanes and cooking appliances. Copper is a reddish-brown metal used in its pure and alloyed forms. Lead is very malleable, ductile, and resists corrosion, making it useful as a radiation insulator. Non-metallic materials discussed include asbestos, once used in insulation and brake linings but now restricted due to health effects, ceramics for cutting tools and rocket casings, and cement composed of minerals and used to make concrete.
Technology of Material, Aluminum
Aluminum is the third most abundant element in the Earth's crust, after oxygen and silicon. It is extracted from bauxite ore through the Bayer process, where it is purified into aluminum oxide and then smelted into aluminum metal through electrolysis. Aluminum is a lightweight, durable, ductile and corrosion-resistant metal that is used widely in transportation, construction, packaging, and many other applications due to its unique properties. It can be easily cast, machined and formed while also being recyclable.
What Are the Benefits of Using Aluminums Wire/rod?
Aluminium is a silvery white reactive metal that is typically protected by a tough oxide covering. Aluminum wire rod is also the most readily accessible and cost-effective bike component for racing and mountain bike frames.
ALUMINUM OF PERIODIC TABLE OF ELEMENTS
ALUMINUM
THE 13TH ELEMENT IN THE PERIODIC TABLE OF ELEMENTS
*WHAT IS ALUMINUM?
- Aluminum derives its name from alum. The Latin name for alum is 'alumen' meaning bitter salt. Note on Naming: Sir Humphry Davy proposed the name aluminum for the element, however, the name aluminium was adopted to conform with the "ium" ending of most elements. This spelling is in use in most countries.
Aluminium was also the spelling in the U.S. until 1925, when the American Chemical Society officially decided to use the name aluminum instead.
*WHO DISCOVERED ALUMINUM?
-Hans Christian Oersted
*FACTS ABOUT OERSTED
-Hans Christian Oersted launched a new epoch in science when he discovered that electricity and magnetism are linked.
He showed by experiment that an electric current flowing through a wire could move a nearby magnet.
The discovery of electromagnetism set the stage for the eventual development of our modern technology-based world.
Oersted also discovered the chemical compound piperine and achieved the first isolation of the element aluminum.
ALUMINUM BASIC FACTS:
Symbol: Al Atomic Number: 13 Atomic Weight:26.981539 Element Classification Basic Metal CAS Number: 7429-90-5
Aluminum Periodic Table Location
Group: 13 Period: 3 Block: p
ALUMINUM PHYSICAL DATA
State at room temperature (300 K): Solid Appearance: soft, light, silvery white metal Density: 2.6989 g/cc Density at Melting Point: 2.375 g/cc Specific Gravity: 7.874 (20 °C) Melting Point: 933.47 K, 660.32 °C, 1220.58 °F
Boiling Point: 2792 K, 2519 °C, 4566 °F Critical Point: 8550 K Heat of Fusion: 10.67 kJ/mol Heat of Vaporization: 293.72 kJ/mol Molar Heat Capacity: 25.1 J/mol·K Specific Heat: 24.200 J/g·K (at 20 °C)
*Uses and properties
-Image explanation
Aircraft fuselages and aluminium foil are just two of the many and varied uses of this element.
-Appearance
Aluminium is a silvery-white, lightweight metal. It is soft and malleable.malleable.
Aluminum vs cast iron
Aluminum is lighter than cast iron and is the most abundant metal found on Earth's surface. While cast iron is stronger, it oxidizes faster when exposed to air compared to aluminum, which forms a protective oxide layer. The document provides details on the properties and applications of aluminum and cast iron metals.
Aluminum a lloy ash composites
This document discusses aluminum alloy-ash composites. It provides background information on the key components - aluminum, alloys, ash, and composites. Aluminum is a lightweight metal that is commonly used in alloys through the addition of other metals like copper and magnesium to improve properties. Ash is a fine powder byproduct from coal burning. Composites combine materials to achieve desired properties. Specifically, metal matrix composites embed reinforcements like particles or fibers in a metal matrix. The document focuses on aluminum alloy-fly ash composites fabricated through stir casting or squeeze casting. It presents the chemical composition and mechanical properties of AA6061 aluminum alloy composites reinforced with fly ash, finding improvements in properties from the homogeneous addition and
Aluminum
- Aluminum is the most abundant metal in the Earth's crust and is a light-weight, non-toxic metal that can be easily machined or cast. It is strengthened through alloying with other metals.
- Aluminum is strong, corrosion resistant, conducts electricity and heat well, and is readily weldable. It provides greater strength than steel within a given weight budget.
- Aluminum reaches its endurance limit sooner than steel in terms of flexure but has good flexural strength and rigidity. It is non-sparking and non-ferromagnetic.
aluminium present xxx
Aluminum has many useful properties including being lightweight, strong, corrosion resistant, and highly conductive. It is used widely in transportation, packaging, construction, electrical systems, and more due to these advantageous properties.
Aluminium Metal and Aluminium Products, Cast Aluminium Alloys, Alumina Extrac...
Aluminium Metal and Aluminium Products, Cast Aluminium Alloys, Alumina Extraction, Aluminium Conductor, Aluminium Foil, Flexible Foil Packaging Laminate, Aluminium Foil Packs, Printing on Aluminium Foil, Beneficiation of Bauxite, Aluminium Die Castings
Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Aluminium as a packaging material is unmatched owing to its light weight, hygienic and non-contamination which eventually results in longer shelf-life of end products.
See more
https://goo.gl/iF25iN
https://goo.gl/3OASR3
https://goo.gl/fSIHG7
Tags
All about Aluminium, Alumina extraction, Alumina from Its Ores, Aluminium Alloys Applications, Aluminium and Aluminium Alloys, Aluminium and Aluminium Products, Aluminium and Aluminium Products Business, Aluminium applications, Aluminium Based Profitable Projects, Aluminium Based Small Scale Industries Projects, aluminium business ideas, aluminium business plan, Aluminium Extrusion, Aluminium Foil in Pharmaceutical Packaging, Aluminium Foil Production, aluminium manufacturing process, Aluminium metal and aluminium products, Aluminium production Industry in India, Aluminium production process, Aluminium Products Making Small Business Manufacturing, Aluminum and Aluminum Alloys, Aluminum Extrusion Technology, Aluminum Properties and Physical Metallurgy, Automatic packaging in foil, Best small and cottage scale industries, Business guidance for aluminium production, Business Plan for a Startup Business, Business start-up, Cast aluminium alloys, Extracting pure aluminum from bauxite, Extraction of aluminium, Fundamentals of Aluminium Metallurgy, Fundamentals of aluminium metallurgy production processing and applications, Great Opportunity for Startup, How Aluminium is produced, How aluminium products are made, How aluminum foil is made, How aluminum is made, How is aluminum extracted, How is aluminum used, How is electrolysis used to extract Aluminium?, How to Select a Flexible Foil Packaging Laminate, How to start a successful Aluminium business, How to Start Aluminium Fabrication Business, How to Start Aluminium production Business, How to Start Aluminium production Industry in India, How to Start Aluminum can Manufacturing Business, Lectrolytic Production of Aluminium, Liquid Packaging in Aluminium Foil, Manufacture of Aluminium Foil, Metallurgy of Aluminium Alloys, Most Profitable Aluminium production Business Ideas, New small scale ideas in Aluminium production industry, Printing on Aluminium Foil, Production of Aluminium, Profitable Aluminium Business Ideas & Opportunities
Aluminium
Aluminum is the third most abundant element in the Earth's crust. It is a soft, lightweight, corrosion-resistant metal that is highly conductive of heat and electricity. Aluminum occurs naturally as bauxite ore and is extracted through the Bayer process to produce alumina, which is then smelted using the Hall-Héroult process to produce aluminum metal. Aluminum and its alloys have a variety of applications due to their properties, including in transportation, packaging, construction, and electrical sectors. Aluminum is fully recyclable without loss of quality and recycling it requires much less energy than producing it from ore.
International Journal of Engineering and Science Invention (IJESI)
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Non Ferrous Metals
The document discusses non-ferrous metals and focuses on aluminium. It defines metals and classifies them as ferrous and non-ferrous. For aluminium, it describes its properties, common uses in construction, how it is extracted from bauxite ore and manufactured, and why it is widely used in the building industry due to properties like durability, flexibility, strength to weight ratio, and recyclability.
Eme engineering materials
Properties of materials
Types and applications of Ferrous and Nonferrous metals
Timber
Abrasive material
Silica
Ceramics
Glass
Graphite
Diamond
Plastic
Polymer
Similar to Aluminium alloys in nuclear (20)
What Are the Benefits of Using Aluminums Wire/rod?
What Are the Benefits of Using Aluminums Wire/rod?
Aluminium Metal and Aluminium Products, Cast Aluminium Alloys, Alumina Extrac...
Aluminium Metal and Aluminium Products, Cast Aluminium Alloys, Alumina Extrac...
International Journal of Engineering and Science Invention (IJESI)
International Journal of Engineering and Science Invention (IJESI)
More from onlinemetallurgy.com
WATER JET CUTTING
The document discusses abrasive waterjet machining (AWJM). It begins by explaining that AWJM uses a high pressure water jet mixed with abrasive particles to cut materials. It then discusses the history and development of AWJM, the types of water jets (pure water jet and abrasive water jet), how AWJM works, its applications in cutting a wide variety of materials, advantages like lack of heat affected zones and ability to cut complex shapes, and comparisons to other machining methods. The document provides examples of materials cut with AWJM and concludes by discussing trends in using more environmentally friendly methods like cryogenic abrasive jet machining.
Twinning
This document discusses different types of crystal twinning, including twined crystals, twin boundaries, twin axis, and types of twinning such as annealing twins and deformation twins. It provides details on how annealing twins form as a result of changes during cooling when one crystal structure becomes unstable and transforms into a more stable structure. Deformation twins form as a result of stress on crystals after formation and are common in HCP and BCC metals. Examples of twinned crystal microstructures in copper are also shown.
TTT diagram of eutectoid steel and martensitic transformation
The document discusses TTT diagrams and phase transformations in steel. It explains that TTT diagrams plot transformation over time and temperature, showing the different phases formed. The C-shaped curve represents the austenitic, pearlitic, bainitic, and martensitic regions. Ms and Mf lines mark the start and end of martensite formation. Martensite has a body-centered tetragonal crystal structure formed by atomic realignment without diffusion. The document also discusses order and disorder in alloy solutions above and below the critical temperature.
Tolerances and allowances
This document discusses tolerances and allowances in manufacturing. It defines tolerance as the permissible variation from a basic dimension for a part to still function properly. Interchangeable manufacturing aims to produce parts that can be assembled without further fitting by specifying tolerances. Both unilateral and bilateral tolerances are explained, with the former having the total tolerance in one direction and the latter dividing it between plus and minus ranges. Basic dimensions set the theoretical size that actual dimensions may vary from within tolerances. Tolerances allow for imperfect manufacturing while ensuring parts are still interchangeable.
Tolerance and allowance 2
The document discusses tolerances and allowances in manufacturing. It defines tolerance as the acceptable variation from a nominal dimension, with three common types being limit, unilateral, and bilateral tolerances. Allowance is defined as a planned deviation from nominal to account for dimensional changes during future manufacturing processes, such as grinding or heat treating. The document explains that tolerances and allowances are important for interchangeable parts, product design, quality control, and manufacturing efficiency.
Time temperature transformation curves 2
This document discusses time-temperature transformation (TTT) curves and the different microstructures that form in steel depending on the cooling process. It provides details on:
1) Isothermal TTT curves show the change in phase that occurs at constant temperature and can indicate the start and finish of transformations.
2) The TTT diagram for eutectoid steel shows the transformations of austenite to pearlite, bainite, and martensite depending on temperature and time.
3) Different cooling processes (paths on the TTT diagram) will result in different microstructures like martensite, bainite, or pearlite, with martensite being the hardest and strongest and
Thorium
Thorium is a naturally occurring radioactive metal that is about three times more abundant than uranium. It can be used as a nuclear fuel in reactors. Thorium requires neutron bombardment to become fissionable and can breed uranium-233 fuel. Advantages of thorium include producing less long-lived radioactive waste and being more proliferation resistant compared to uranium. However, thorium also has disadvantages such as producing radioactive waste from mining and being more difficult and costly to process than uranium.
The structure and properties of polymers
The document discusses the structure and properties of polymers. It defines polymers as long molecules composed of repeating structural units called monomers. Polymers can be made of one type of monomer or multiple types. The properties of a polymer depend on factors like chain length, bonding between chains, crystallinity, and cross-linking. Thermoplastics are weakly bonded and can be remelted, while thermosets have strong cross-links and hold their shape.
Stress corrosion cracking
Stress corrosion cracking is the failure of a normally ductile metal caused by the combined effect of tensile stress and a corrosive environment. Three factors are required for stress corrosion cracking to occur: a susceptible material, a tensile stress (either applied or residual), and a corrosive environment. Stress corrosion cracking leads to the formation of cracks that propagate in the material over time and eventually result in sudden brittle fracture.
Stainless steel in nuclear
This document provides an overview of stainless steel, including its introduction, production, classification, characteristics, and applications in the nuclear industry and nuclear power industry. Stainless steel is an alloy of iron, chromium and sometimes nickel that forms a protective oxide layer to resist corrosion. It is produced through processes like argon-oxygen decarburization and vacuum-oxygen decarburization. The document discusses the use of various stainless steel grades in applications like nuclear fuel processing, waste treatment, light water reactors, sodium cooling reactors, and components of steam power plants.
Shore hardness
The document discusses shore hardness testing, which measures the resistance of materials to indentation. Shore hardness is measured using a durometer indenter that penetrates the sample, with higher numbers indicating greater resistance. The shore scale has two types - Shore A for softer rubbers and Shore D for harder materials. Shore hardness provides an empirical measure of indentation resistance but does not predict other material properties. Mohs hardness characterizes scratch resistance and was created by Friedrich Mohs using minerals to demonstrate increasing hardness.
Sheet forming
This document discusses various sheet forming techniques used to produce parts from sheet metal. It covers factors that must be considered like elongation and anisotropy. Specific techniques covered include deep drawing, bending, press braking, and shearing. Deep drawing involves stretching and drawing sheet metal into cylindrical or box shapes using a punch and die. Bending can be done with presses, rolls, or press brakes and factors like bend radius and anisotropy are important. Shearing uses punches and dies to cut blanks from sheet metal.
Rusting of fe and ss
Iron and steel corrode when exposed to oxygen in the air, forming rust. Rust occurs through a chemical reaction where iron reacts with oxygen to form iron oxide. The iron oxide molecules are larger than the original iron atoms, causing rust to flake off and weaken the metal over time. Some elements added to steel, such as copper, can slow the rusting process by forming protective oxide layers. Stainless steel is an alloy that is highly resistant to rusting due to the formation of a thin, stable chromium oxide film that protects the underlying metal.
Rolling
Bulk deformation processes like rolling are used to reduce the thickness or change the cross-section of metal workpieces. Rolling involves compressing metal between rotating rolls to produce flat products like plates and sheets. Hot rolling is done above the metal's recrystallization temperature to facilitate greater reduction in thickness than cold rolling. It produces a softer microstructure through recrystallization while cold rolling strengthens metals but makes them more brittle. Both processes impact the mechanical properties and microstructure of metals.
Radioactivity & waste
Radioactive waste comes in low-level and high-level forms. Low-level waste includes slightly contaminated materials that are buried or stabilized in concrete. High-level waste is highly radioactive spent nuclear fuel, which is currently stored on-site at reactors in water pools or dry casks until a national repository opens. Managing radioactive waste safely and finding locations to dispose of it long-term continues to be a politically challenging issue due to public health concerns and NIMBY opposition.
Radiation hazards
Radiation is energy transmitted through space or matter in the form of waves or particles. It includes visible light, ultraviolet light from the sun, and radio/TV signals. Nuclear radiation comes from unstable atoms undergoing radioactive decay, emitting particles like alpha and beta or electromagnetic waves like gamma rays. Exposure to ionizing radiation can damage living tissue. Natural sources of radiation include cosmic rays, radioactive elements in the earth's crust like radon, and some food/drink. Medical procedures and occupational exposures also contribute. In materials, radiation can cause impurities from nuclear reactions, ionization by charged particles, and displacement of atoms from their normal positions in the crystal structure.
Ultrasonic hardness testing
This document discusses hardness testing methods. It defines hardness as the resistance to indentation or penetration in metallurgy. Hardness testing is performed for research and application purposes. The common hardness testing methods described are Brinell, Rockwell, Vicker, and ultrasonic hardness testing. Ultrasonic hardness testing uses piezoelectric transducers to convert ultrasonic frequencies into mechanical force and indentation, then measures the frequency shift to determine hardness.
Gas cooled reactors
Gas cooled reactors use gas as a coolant, which has advantages over liquid coolants. Early gas cooled reactors used air or carbon dioxide as coolants. Key advantages of gas coolants include continuous cooling flow without phase changes, ease of temperature control and calculation, and reduced risks of fuel-coolant interactions. Later advanced gas cooled reactors used carbon dioxide at higher pressures and temperatures, or helium, to achieve improved efficiencies over 40%. Generation IV gas cooled fast reactors aim to further boost efficiency by combining high operating temperatures with fast neutron spectra.
Fiber manufacturing
The document discusses different types of fibers used in manufacturing including glass fibers, aramid fibers, carbon fibers, and ceramic fibers. Glass fibers are the most versatile industrial material and are produced from abundant raw materials. Aramid fibers have very high strength-to-weight ratios and are used in tires and protective clothing. Carbon fibers are produced from polyacrylonitrile or pitch and involve thermosetting, carbonizing, and graphitizing processes. Ceramic fibers include oxide and non-oxide varieties produced using sol-gel processing or from organometallic precursors.
Hardness testing
The document discusses different hardness testing methods including Brinell hardness testing and Rockwell hardness testing. Brinell hardness testing involves pressing an indenter ball into the surface of a metal under a load and measuring the diameter of the indentation. Rockwell hardness testing measures the additional depth of a heavy load indenter beyond the depth of a previously applied light load. Both tests provide standardized hardness values and have advantages such as being simple and quick to perform.
More from onlinemetallurgy.com (20)
TTT diagram of eutectoid steel and martensitic transformation
TTT diagram of eutectoid steel and martensitic transformation
Recently uploaded
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Recently uploaded (20)
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Aluminium alloys in nuclear
- 1. Aluminum alloys in nuclear industry
- 2. For more help contact me Muhammad Umair Bukhari Engr.umair.bukhari@gmail.com www.bzuiam.webs.com 03136050151
- 3. Introduction Rare and expensive a century ago, aluminium has since been identified as the most common metal on earth, forming about eight percent of the earth's crust. It is the third most plentiful element known to man. Only oxygen and silicon (sand) exist in greater quantities. Atomic no -13 White silver color.
- 5. The Aluminum Association Alloy and Temper Designation System.
- 7. Nuclear materials Mechanical strength Heat transfer properties Ductility Thermal stability Structural integrity Compatibility Fabricability, machinability Availability Corrosion resistance cost
- 8. Special properties Neutronic properties Chemical interaction Induced radioactivity Particle interdiffusion Irradiation Stability Ease of fuel reprocessing
- 9. Reactors use of aluminium alloys As a fuel element. As a cladding material. As a corrosion resistant material.