4. g7 and g1
•Download as PPT, PDF•
1 like•429 views
Alkali metals react vigorously with chlorine to form metal chlorides. Lithium reacts with chlorine gas to form lithium chloride according to the chemical equation 2Li (s) + Cl2 (g) → 2LiCl (s). Sodium also reacts with chlorine gas in a similar reaction to form sodium chloride, represented by the equation 2Na (s) + Cl2 (g) → 2NaCl (s).
Report
Share
Report
Share
Recommended
Ch 4 elements_compounds_and_mixtures
Elements, compounds, and mixtures are discussed. Elements are pure substances that cannot be broken down further, while compounds are formed when two or more elements are chemically bonded together. Compounds have unique properties and can be broken down into their constituent elements through chemical or electrolytic processes. Elements are classified as metals, nonmetals, or metalloids based on their physical properties such as conductivity.
CST Compounds Chemical Rns_Review
The document discusses key concepts about chemical reactions and equations including:
1. Chemical equations are used to represent chemical reactions, with reactants on the left side and products on the right side.
2. A reaction is endothermic if heat energy is absorbed, and exothermic if heat energy is released.
3. The law of conservation of matter states that the number and type of atoms is the same for both reactants and products, though they may be rearranged. Mass is also conserved in chemical reactions.
Science home work metal
This document discusses acids and their properties. It notes that acids have a pH below 7.0 and release hydrogen ions in water. Acids are divided into two main classes: strong acids which cause severe skin burns like hydrochloric, nitric, and sulfuric acids, and weak acids which are mildly aggressive like acetic, citric, and tartaric acids. It also discusses how different metals react at different speeds with acids, with more reactive metals like potassium and sodium reacting vigorously and less reactive metals like copper and gold reacting slowly or not at all. The reactivity series shows which metals are most reactive with acids.
Elements compounds mixtures
Scientists classify matter based on its composition into mixtures, elements, and compounds. Mixtures are two or more substances that are not chemically combined and can be separated physically. Elements are the simplest substances that cannot be broken down further, while compounds are pure substances made of two or more elements chemically bonded together. Mixtures can be further classified as homogeneous if the substances are uniformly mixed throughout, or heterogeneous if they are not. Solutions are homogeneous mixtures where one substance dissolves in another.
Reaction of metals with air
Metals react with oxygen in the air to form metal oxides. For example, magnesium burns with an intense light when heated in air, forming magnesium oxide. Other metals like copper and aluminum also form oxides when heated in air. The reactivity of different metals with oxygen varies, with sodium and potassium being the most reactive and catching fire in open air. Less reactive metals like iron do not burn but will react when sprinkled as filings in a flame. Some metal oxides like aluminum oxide are amphoteric, reacting with both acids and bases.
Unit 1 Learning Outcomes
The document introduces various chemistry concepts including:
1. Chemical reactions, elements, atoms, the periodic table, temperature and its effect on reaction rates, solubility, valency, separation methods like filtration and distillation, properties of substances, carbon dioxide testing, flame tests, naming compounds using prefixes and Roman numerals.
2. It asks questions about these concepts and how to determine information from data books and the periodic table.
3. Key terms defined include chemical reaction, precipitate, effervescence, exothermic, endothermic, element, period, group, units of temperature, concentration, particle size, compound, molecule, soluble, insoluble, solution, valency, filtrate, residue
Chemical Reactions (Review)
This document describes 5 types of chemical reactions:
1. Metals react with oxygen to form metal oxides.
2. Metals react with acids to form salts and hydrogen gas or nitric oxide and water.
3. Metals react with cold water to form metal hydroxides and hydrogen gas, or with steam to form metal oxides and hydrogen gas.
4. Carbonates react with acids to form salts, water and carbon dioxide.
5. Alkalis react with acids to form salts and water.
Module 2 elements-and-compounds
The document provides information about elements and compounds for 7th grade science. It begins by outlining the objectives of describing elements and compounds, explaining the difference between them, and citing examples. It then defines matter and discusses the three states of matter. It explains that elements are pure substances that cannot be broken down further, while compounds are formed by combining two or more elements. The document provides numerous examples of elements and compounds. It also discusses the periodic table and properties of metals, nonmetals and metalloids.
Recommended
Ch 4 elements_compounds_and_mixtures
Elements, compounds, and mixtures are discussed. Elements are pure substances that cannot be broken down further, while compounds are formed when two or more elements are chemically bonded together. Compounds have unique properties and can be broken down into their constituent elements through chemical or electrolytic processes. Elements are classified as metals, nonmetals, or metalloids based on their physical properties such as conductivity.
CST Compounds Chemical Rns_Review
The document discusses key concepts about chemical reactions and equations including:
1. Chemical equations are used to represent chemical reactions, with reactants on the left side and products on the right side.
2. A reaction is endothermic if heat energy is absorbed, and exothermic if heat energy is released.
3. The law of conservation of matter states that the number and type of atoms is the same for both reactants and products, though they may be rearranged. Mass is also conserved in chemical reactions.
Science home work metal
This document discusses acids and their properties. It notes that acids have a pH below 7.0 and release hydrogen ions in water. Acids are divided into two main classes: strong acids which cause severe skin burns like hydrochloric, nitric, and sulfuric acids, and weak acids which are mildly aggressive like acetic, citric, and tartaric acids. It also discusses how different metals react at different speeds with acids, with more reactive metals like potassium and sodium reacting vigorously and less reactive metals like copper and gold reacting slowly or not at all. The reactivity series shows which metals are most reactive with acids.
Elements compounds mixtures
Scientists classify matter based on its composition into mixtures, elements, and compounds. Mixtures are two or more substances that are not chemically combined and can be separated physically. Elements are the simplest substances that cannot be broken down further, while compounds are pure substances made of two or more elements chemically bonded together. Mixtures can be further classified as homogeneous if the substances are uniformly mixed throughout, or heterogeneous if they are not. Solutions are homogeneous mixtures where one substance dissolves in another.
Reaction of metals with air
Metals react with oxygen in the air to form metal oxides. For example, magnesium burns with an intense light when heated in air, forming magnesium oxide. Other metals like copper and aluminum also form oxides when heated in air. The reactivity of different metals with oxygen varies, with sodium and potassium being the most reactive and catching fire in open air. Less reactive metals like iron do not burn but will react when sprinkled as filings in a flame. Some metal oxides like aluminum oxide are amphoteric, reacting with both acids and bases.
Unit 1 Learning Outcomes
The document introduces various chemistry concepts including:
1. Chemical reactions, elements, atoms, the periodic table, temperature and its effect on reaction rates, solubility, valency, separation methods like filtration and distillation, properties of substances, carbon dioxide testing, flame tests, naming compounds using prefixes and Roman numerals.
2. It asks questions about these concepts and how to determine information from data books and the periodic table.
3. Key terms defined include chemical reaction, precipitate, effervescence, exothermic, endothermic, element, period, group, units of temperature, concentration, particle size, compound, molecule, soluble, insoluble, solution, valency, filtrate, residue
Chemical Reactions (Review)
This document describes 5 types of chemical reactions:
1. Metals react with oxygen to form metal oxides.
2. Metals react with acids to form salts and hydrogen gas or nitric oxide and water.
3. Metals react with cold water to form metal hydroxides and hydrogen gas, or with steam to form metal oxides and hydrogen gas.
4. Carbonates react with acids to form salts, water and carbon dioxide.
5. Alkalis react with acids to form salts and water.
Module 2 elements-and-compounds
The document provides information about elements and compounds for 7th grade science. It begins by outlining the objectives of describing elements and compounds, explaining the difference between them, and citing examples. It then defines matter and discusses the three states of matter. It explains that elements are pure substances that cannot be broken down further, while compounds are formed by combining two or more elements. The document provides numerous examples of elements and compounds. It also discusses the periodic table and properties of metals, nonmetals and metalloids.
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.Theresa Lowry-Lehnen
This document provides information on metals and the periodic table. It discusses the layout and components of the periodic table. It then focuses on Group 1 alkali metals, their properties, and reactions with water. It also covers transition metals, common element symbols, and reactions of metals with oxygen, water, and acids. Displacement reactions and the reactivity series are explained. The document concludes with information on extracting metals, including the blast furnace process and electrolysis.Metallurgy part i (1)
The document outlines an assignment on alkali and alkaline earth metals. It asks the student to define alkali metals, provide examples of alkali and alkaline earth metals, describe how reactivity changes down the alkali metal group, and write balanced chemical equations for reactions involving sodium, calcium, potassium, and magnesium.
8 f compounds and mixtures
This document discusses compounds, mixtures, and elements. It defines an element as being made of only one type of atom, while compounds contain two or more different types of atoms bonded together. Compounds are formed through chemical reactions, and can be identified by signs such as bubbling or color changes. There are rules for naming compounds depending on whether they contain two elements, or three or more elements where one is oxygen. Mixtures contain elements or compounds mixed together but are not chemically bonded. The document uses examples like methane, water, and air to illustrate these concepts.
Group 7 elements
Chlorine is added to swimming pools to kill germs. When chlorine is added to water, it forms hypochlorous acid which kills bacteria like E. coli and salmonella, as well as viruses that cause diarrhea and swimmer's ear. Chlorine acts as a disinfectant in swimming pools, killing harmful microbes through the formation of hypochlorous acid.
Elements and Compounds 2
The document discusses elements, compounds, molecules, and chemical bonds. It provides examples of ionic bonds (sodium chloride) and covalent bonds (water). It defines a molecule as two or more atoms connected together, and a compound as two or more different atoms connected together. The document also discusses the chemical formulas of compounds like alcohol and glucose, showing the atoms present and their quantities.
simple chemical reactions - chemistry
This document provides an overview of simple chemical reactions, including:
1. It defines chemical reactions and gives examples of reactions that occur in everyday life like cooking and rusting.
2. It explains the difference between physical and chemical changes and identifies signs that a chemical reaction is occurring.
3. It describes reactants and products, explaining that reactants change into products in a chemical reaction.
C2.3.3 quantitative chemistry
Farmer Giles wants to determine which fertilizer contains more nitrogen. To do this, he needs to calculate the percentage of nitrogen by mass in each fertilizer. KNO3 has a higher percentage of nitrogen than NaNO3 because KNO3 has a lower molar mass and therefore more of its mass is made up of nitrogen. Calculating percentage by mass involves using relative atomic masses and molar masses. For example, the percentage of nitrogen in ammonia is calculated by taking the mass of nitrogen atoms, dividing by the molar mass of ammonia, and multiplying by 100.
Elements, Compounds, Mixtures
This document discusses the classification of matter into elements, compounds, and mixtures. It defines each term and provides examples. Elements are pure substances made of only one type of atom that cannot be broken down further. Compounds are pure substances composed of two or more elements chemically bonded together in fixed ratios to form new substances with different properties from the original elements. Mixtures are physical combinations of elements or compounds that are not chemically bonded and can be separated by physical means such as filtration or evaporation.
Naming ionic-covalent
Naming Compounds provides background on naming ionic and covalent compounds through three main methods: [1] Ionic compounds are named with the cation first followed by -ide; [2] Compounds with transition metals use Latin or IUPAC naming depending on the metal's valence; [3] Covalent compounds are named with a prefix indicating the number of atoms followed by -ide or -oxide.
Naming and writing compounds
This document provides instructions for writing formulas and naming different types of compounds. It explains that to write formulas, you must identify the elements and ions using the periodic table and write the cation first followed by the anion, balancing charges using the crisscross method. The three main types of compounds are ionic without transition metals, ionic with transition metals specified by Roman numerals, and covalent using prefixes and suffixes. Polyatomic ions also have set names and follow normal compound naming rules.
Solubility And Equations
This document discusses several chemistry concepts including isotopes, ions, and bonding. It defines isotopes as atoms of the same element with different numbers of neutrons but the same number of protons. Metals form cations by losing electrons while non-metals form anions by gaining electrons. There are two main types of bonding - ionic bonding between metals and non-metals formed by electrovalent bonds, and covalent bonding where non-metals share electrons. Chemical equations are used to represent chemical reactions and must be balanced.
B sc_I_General chemistry U-IV Ligands and chelates
This document provides an overview of transition metals and their properties. It discusses the electronic configurations of transition metals and how they can exhibit multiple oxidation states. It describes the formation of complexes between transition metals and ligands. Common ligands include ammonia, cyanide, and ethylenediamine. The document outlines the naming conventions for complexes and discusses different coordination geometries such as octahedral and square planar. It also introduces the concept of isomers in complexes.
Unit 2, Lesson 2.6 - Elements and Compounds
Unit 2, Lesson 2.6 - Elements and Compounds
Lesson Outline:
1. Matter: An Overview
2. Pure Substance
3. Element vs. Compound
4. Metals, Metalloids, Nonmetals
5. Law of Definite Composition
minerals
The document discusses minerals found in the Earth's crust, describing minerals as either natural elements or natural compounds. It provides examples of common elements like carbon and compounds like calcium carbonate that make up minerals. Properties of minerals like hardness and solubility in water are also examined, along with how heating can decompose some mineral compounds.
Balancing equations
The document discusses balancing chemical equations, noting that all atoms are conserved in reactions. It states that all should know this, most should be able to balance simple equations, and some could balance more complex equations. It also provides a list of common elements and their chemical formulas.
Ch06 elements, compounds & mixtures
This document discusses the classification of matter into elements, compounds, and mixtures. It defines elements as the simplest form of matter that cannot be broken down further through chemical reactions. Compounds are formed via chemical reactions and consist of two or more chemically bonded elements. Mixtures are physical combinations of elements and/or compounds that are not chemically bonded and can be separated using physical means. The document provides examples and properties to distinguish among these three classifications of matter.
Chapter 11 notes
Here is the balanced net ionic equation for the reaction between lead(II) nitrate and sulfuric acid:
Pb(NO3)2 (aq) + H2SO4 (aq) → PbSO4 (s) + 2HNO3 (aq)
Pb2+ (aq) + SO42- (aq) → PbSO4 (s)
The spectator ions of NO3- and H+ cancel out, leaving the net ionic equation showing just the participating ions of Pb2+ and SO42- forming the insoluble precipitate of PbSO4.
Metals and acids ok1294990932
The document describes displacement reactions between metals and metal ion solutions. More reactive metals can displace less reactive metals from their solutions. For example, magnesium displaces iron from iron(II) nitrate, forming magnesium nitrate and iron. Magnesium is more reactive than iron. Lead also displaces copper from copper(II) sulphate, forming lead(II) sulphate and copper, as lead is more reactive than copper. However, copper does not displace lead, as copper is not more reactive than lead.
Chemical Reactions
The document discusses various topics relating to chemical reactions, including:
1) Chemical reaction indicators like color change, heat/light/sound production, gas formation, and precipitation.
2) The law of conservation of mass discovered by Antoine Lavoisier, which states that the total mass of reactants equals the total mass of products in a chemical reaction.
3) Different types of chemical reactions like decomposition, combination, precipitation, oxidation, and reduction reactions.
Chem 101 week 4
Chem 101 Powerpoints Week ending 2/10/2012
Chapter 3 Part 1 covers naming binary ionic compounds containing metals and non-metals, writing formulas from names, and mass relationships in chemical reactions including molar mass, moles, and percent composition. Key topics include naming compounds based on the type of metal cation present (Type I vs Type II), rules for naming acids and polyatomic ions, calculating formula mass from chemical formulas, using the molar mass to determine the number of particles in a given mass of a substance, and calculating the percent composition of elements in compounds.
6
Ammonia is produced industrially through the Haber process, which involves reacting nitrogen and hydrogen at high pressures and temperatures. However, the reaction is reversible and does not go to completion. To maximize yield while keeping costs low, manufacturers use a compromise of 450°C and 200 atmospheres, as extremely high pressures require expensive equipment and low temperatures slow the reaction rate. Key costs in ammonia production include raw materials, energy, equipment, wages. Yield is maximized by using a catalyst, removing ammonia as it forms, and recycling unreacted gases.
Carbon and nitrogen footprint for food crop production
The world is running short of time and option at social and economic front in view of high risks related with global warming and climate change, which is a result of the “enhanced greenhouse effect” mainly due to human induced release of greenhouse gases (GHGs) into the atmosphere (IPCC, 2007). The GHGs inventories are going on all over the world and every possible method to control them are being recognized and evaluated. Carbon footprint is a measure of the exclusive total amount of carbon dioxide emissions that is directly and indirectly caused by an activity or is accumulated over the life stages of a product (Pandey et al., 2011). The crop production contributes significantly to global carbon emissions at different stage of crop through the production and use of farm machinery, crop protection chemicals such as herbicides, insecticides and fungicides, and fertilizer (Hillier et al., 2012). Pathak et al.(2010) calculated the carbon footprint of 24 Indian food items and reported that in the production of these food item 87% emission came from food production followed by preparation (10%), processing (2%) and transportation (1%). Maheswarappa et al. (2011) reported that the C-sustainability index (increase in C output as % of C-based input) of Indian agriculture has decreased with time (from 7 in 1960-61 to 3 in 2008-9). Agricultural uses, including both food production and consumption, contribute the most reactive nitrogen (Nr) to the global environment. Once lost to the environment, the nitrogen moves through the Earth’s atmosphere, forests, grasslands and waters causing a cascade of environmental changes that negatively impact both people and ecosystems. Leach et al. (2012) developed a tool called N-Calculator, a nitrogen footprint model that provides information on how to reduce Nr to the environment. Therefore, Quantification of GHGs from each stage of lifecycle of a product gives complete picture of its impact on global warming and provides necessary information to develop low C technology and mitigation option not only for industrial product but also for agricultural produce. The C and N footprint for a given field will allow growers, advisors and policy makers to make informed decisions about management to optimize crop production, biodiversity and carbon footprint.
More Related Content
What's hot
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.Theresa Lowry-Lehnen
This document provides information on metals and the periodic table. It discusses the layout and components of the periodic table. It then focuses on Group 1 alkali metals, their properties, and reactions with water. It also covers transition metals, common element symbols, and reactions of metals with oxygen, water, and acids. Displacement reactions and the reactivity series are explained. The document concludes with information on extracting metals, including the blast furnace process and electrolysis.Metallurgy part i (1)
The document outlines an assignment on alkali and alkaline earth metals. It asks the student to define alkali metals, provide examples of alkali and alkaline earth metals, describe how reactivity changes down the alkali metal group, and write balanced chemical equations for reactions involving sodium, calcium, potassium, and magnesium.
8 f compounds and mixtures
This document discusses compounds, mixtures, and elements. It defines an element as being made of only one type of atom, while compounds contain two or more different types of atoms bonded together. Compounds are formed through chemical reactions, and can be identified by signs such as bubbling or color changes. There are rules for naming compounds depending on whether they contain two elements, or three or more elements where one is oxygen. Mixtures contain elements or compounds mixed together but are not chemically bonded. The document uses examples like methane, water, and air to illustrate these concepts.
Group 7 elements
Chlorine is added to swimming pools to kill germs. When chlorine is added to water, it forms hypochlorous acid which kills bacteria like E. coli and salmonella, as well as viruses that cause diarrhea and swimmer's ear. Chlorine acts as a disinfectant in swimming pools, killing harmful microbes through the formation of hypochlorous acid.
Elements and Compounds 2
The document discusses elements, compounds, molecules, and chemical bonds. It provides examples of ionic bonds (sodium chloride) and covalent bonds (water). It defines a molecule as two or more atoms connected together, and a compound as two or more different atoms connected together. The document also discusses the chemical formulas of compounds like alcohol and glucose, showing the atoms present and their quantities.
simple chemical reactions - chemistry
This document provides an overview of simple chemical reactions, including:
1. It defines chemical reactions and gives examples of reactions that occur in everyday life like cooking and rusting.
2. It explains the difference between physical and chemical changes and identifies signs that a chemical reaction is occurring.
3. It describes reactants and products, explaining that reactants change into products in a chemical reaction.
C2.3.3 quantitative chemistry
Farmer Giles wants to determine which fertilizer contains more nitrogen. To do this, he needs to calculate the percentage of nitrogen by mass in each fertilizer. KNO3 has a higher percentage of nitrogen than NaNO3 because KNO3 has a lower molar mass and therefore more of its mass is made up of nitrogen. Calculating percentage by mass involves using relative atomic masses and molar masses. For example, the percentage of nitrogen in ammonia is calculated by taking the mass of nitrogen atoms, dividing by the molar mass of ammonia, and multiplying by 100.
Elements, Compounds, Mixtures
This document discusses the classification of matter into elements, compounds, and mixtures. It defines each term and provides examples. Elements are pure substances made of only one type of atom that cannot be broken down further. Compounds are pure substances composed of two or more elements chemically bonded together in fixed ratios to form new substances with different properties from the original elements. Mixtures are physical combinations of elements or compounds that are not chemically bonded and can be separated by physical means such as filtration or evaporation.
Naming ionic-covalent
Naming Compounds provides background on naming ionic and covalent compounds through three main methods: [1] Ionic compounds are named with the cation first followed by -ide; [2] Compounds with transition metals use Latin or IUPAC naming depending on the metal's valence; [3] Covalent compounds are named with a prefix indicating the number of atoms followed by -ide or -oxide.
Naming and writing compounds
This document provides instructions for writing formulas and naming different types of compounds. It explains that to write formulas, you must identify the elements and ions using the periodic table and write the cation first followed by the anion, balancing charges using the crisscross method. The three main types of compounds are ionic without transition metals, ionic with transition metals specified by Roman numerals, and covalent using prefixes and suffixes. Polyatomic ions also have set names and follow normal compound naming rules.
Solubility And Equations
This document discusses several chemistry concepts including isotopes, ions, and bonding. It defines isotopes as atoms of the same element with different numbers of neutrons but the same number of protons. Metals form cations by losing electrons while non-metals form anions by gaining electrons. There are two main types of bonding - ionic bonding between metals and non-metals formed by electrovalent bonds, and covalent bonding where non-metals share electrons. Chemical equations are used to represent chemical reactions and must be balanced.
B sc_I_General chemistry U-IV Ligands and chelates
This document provides an overview of transition metals and their properties. It discusses the electronic configurations of transition metals and how they can exhibit multiple oxidation states. It describes the formation of complexes between transition metals and ligands. Common ligands include ammonia, cyanide, and ethylenediamine. The document outlines the naming conventions for complexes and discusses different coordination geometries such as octahedral and square planar. It also introduces the concept of isomers in complexes.
Unit 2, Lesson 2.6 - Elements and Compounds
Unit 2, Lesson 2.6 - Elements and Compounds
Lesson Outline:
1. Matter: An Overview
2. Pure Substance
3. Element vs. Compound
4. Metals, Metalloids, Nonmetals
5. Law of Definite Composition
minerals
The document discusses minerals found in the Earth's crust, describing minerals as either natural elements or natural compounds. It provides examples of common elements like carbon and compounds like calcium carbonate that make up minerals. Properties of minerals like hardness and solubility in water are also examined, along with how heating can decompose some mineral compounds.
Balancing equations
The document discusses balancing chemical equations, noting that all atoms are conserved in reactions. It states that all should know this, most should be able to balance simple equations, and some could balance more complex equations. It also provides a list of common elements and their chemical formulas.
Ch06 elements, compounds & mixtures
This document discusses the classification of matter into elements, compounds, and mixtures. It defines elements as the simplest form of matter that cannot be broken down further through chemical reactions. Compounds are formed via chemical reactions and consist of two or more chemically bonded elements. Mixtures are physical combinations of elements and/or compounds that are not chemically bonded and can be separated using physical means. The document provides examples and properties to distinguish among these three classifications of matter.
Chapter 11 notes
Here is the balanced net ionic equation for the reaction between lead(II) nitrate and sulfuric acid:
Pb(NO3)2 (aq) + H2SO4 (aq) → PbSO4 (s) + 2HNO3 (aq)
Pb2+ (aq) + SO42- (aq) → PbSO4 (s)
The spectator ions of NO3- and H+ cancel out, leaving the net ionic equation showing just the participating ions of Pb2+ and SO42- forming the insoluble precipitate of PbSO4.
Metals and acids ok1294990932
The document describes displacement reactions between metals and metal ion solutions. More reactive metals can displace less reactive metals from their solutions. For example, magnesium displaces iron from iron(II) nitrate, forming magnesium nitrate and iron. Magnesium is more reactive than iron. Lead also displaces copper from copper(II) sulphate, forming lead(II) sulphate and copper, as lead is more reactive than copper. However, copper does not displace lead, as copper is not more reactive than lead.
Chemical Reactions
The document discusses various topics relating to chemical reactions, including:
1) Chemical reaction indicators like color change, heat/light/sound production, gas formation, and precipitation.
2) The law of conservation of mass discovered by Antoine Lavoisier, which states that the total mass of reactants equals the total mass of products in a chemical reaction.
3) Different types of chemical reactions like decomposition, combination, precipitation, oxidation, and reduction reactions.
Chem 101 week 4
Chem 101 Powerpoints Week ending 2/10/2012
Chapter 3 Part 1 covers naming binary ionic compounds containing metals and non-metals, writing formulas from names, and mass relationships in chemical reactions including molar mass, moles, and percent composition. Key topics include naming compounds based on the type of metal cation present (Type I vs Type II), rules for naming acids and polyatomic ions, calculating formula mass from chemical formulas, using the molar mass to determine the number of particles in a given mass of a substance, and calculating the percent composition of elements in compounds.
What's hot (20)
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.
Junior cycle science chemistry metals. By Theresa Lowry-Lehnen. Science Teacher.
B sc_I_General chemistry U-IV Ligands and chelates
B sc_I_General chemistry U-IV Ligands and chelates
Viewers also liked
6
Ammonia is produced industrially through the Haber process, which involves reacting nitrogen and hydrogen at high pressures and temperatures. However, the reaction is reversible and does not go to completion. To maximize yield while keeping costs low, manufacturers use a compromise of 450°C and 200 atmospheres, as extremely high pressures require expensive equipment and low temperatures slow the reaction rate. Key costs in ammonia production include raw materials, energy, equipment, wages. Yield is maximized by using a catalyst, removing ammonia as it forms, and recycling unreacted gases.
Carbon and nitrogen footprint for food crop production
The world is running short of time and option at social and economic front in view of high risks related with global warming and climate change, which is a result of the “enhanced greenhouse effect” mainly due to human induced release of greenhouse gases (GHGs) into the atmosphere (IPCC, 2007). The GHGs inventories are going on all over the world and every possible method to control them are being recognized and evaluated. Carbon footprint is a measure of the exclusive total amount of carbon dioxide emissions that is directly and indirectly caused by an activity or is accumulated over the life stages of a product (Pandey et al., 2011). The crop production contributes significantly to global carbon emissions at different stage of crop through the production and use of farm machinery, crop protection chemicals such as herbicides, insecticides and fungicides, and fertilizer (Hillier et al., 2012). Pathak et al.(2010) calculated the carbon footprint of 24 Indian food items and reported that in the production of these food item 87% emission came from food production followed by preparation (10%), processing (2%) and transportation (1%). Maheswarappa et al. (2011) reported that the C-sustainability index (increase in C output as % of C-based input) of Indian agriculture has decreased with time (from 7 in 1960-61 to 3 in 2008-9). Agricultural uses, including both food production and consumption, contribute the most reactive nitrogen (Nr) to the global environment. Once lost to the environment, the nitrogen moves through the Earth’s atmosphere, forests, grasslands and waters causing a cascade of environmental changes that negatively impact both people and ecosystems. Leach et al. (2012) developed a tool called N-Calculator, a nitrogen footprint model that provides information on how to reduce Nr to the environment. Therefore, Quantification of GHGs from each stage of lifecycle of a product gives complete picture of its impact on global warming and provides necessary information to develop low C technology and mitigation option not only for industrial product but also for agricultural produce. The C and N footprint for a given field will allow growers, advisors and policy makers to make informed decisions about management to optimize crop production, biodiversity and carbon footprint.
Merger of Deepak Fertilizer & Petrochemical Corporation Ltd (DFPCL) and Manga...
Probable merger of Deepak Fertilizer & Petrochemical Corporation Ltd (DFPCL) and Mangalore Chemical Fertilizer Ltd (MCFL)....Case Study
Nitrogen cycle
1. The nitrogen cycle describes how nitrogen is converted between its various forms and moves between the atmosphere, soil, plants, and animals.
2. Atmospheric nitrogen is converted to ammonia or nitrates through nitrogen fixation, which allows plants and animals to use it.
3. Nitrification and ammonification convert ammonia into other nitrogen forms that plants can use, and denitrification returns nitrogen to the atmosphere, completing the cycle.
Carbon and nitrogen cycle
The document discusses the carbon and nitrogen cycles. It describes how carbon and nitrogen move between different reservoirs on Earth, including the atmosphere, living organisms, oceans, and fossil fuels. Key steps in the carbon cycle include photosynthesis, respiration, decomposition, and the burning of fossil fuels. The nitrogen cycle involves nitrogen fixation, decay, nitrification, and denitrification as microbes convert nitrogen between gas, organic, and inorganic forms. Human activities like burning fossil fuels are increasing carbon dioxide levels and affecting global climate.
Nitrogen fixation
Carbon is the major constituent element in plants after water. It is found in important biomolecules like chlorophyll, cytochromes, alkaloids, and many vitamins. Nitrogen plays an important role in plant metabolism, growth, reproduction and heredity. Plants cannot utilize atmospheric nitrogen directly and require nitrogen-fixing bacteria to convert it into bioavailable forms like nitrates, nitrites and ammonia. Nitrogen fixation can occur through both biological and non-biological means, with biological nitrogen fixation involving symbiotic associations between plants and nitrogen-fixing microorganisms like Rhizobium bacteria.
2015 Upload Campaigns Calendar - SlideShare
Each month, join us as we highlight and discuss hot topics ranging from the future of higher education to wearable technology, best productivity hacks and secrets to hiring top talent. Upload your SlideShares, and share your expertise with the world!
What to Upload to SlideShare
Not sure what to share on SlideShare?
SlideShares that inform, inspire and educate attract the most views. Beyond that, ideas for what you can upload are limitless. We’ve selected a few popular examples to get your creative juices flowing.
Getting Started With SlideShare
SlideShare is a global platform for sharing presentations, infographics, videos and documents. It has over 18 million pieces of professional content uploaded by experts like Eric Schmidt and Guy Kawasaki. The document provides tips for setting up an account on SlideShare, uploading content, optimizing it for searchability, and sharing it on social media to build an audience and reputation as a subject matter expert.
Viewers also liked (9)
Carbon and nitrogen footprint for food crop production
Carbon and nitrogen footprint for food crop production
Merger of Deepak Fertilizer & Petrochemical Corporation Ltd (DFPCL) and Manga...
Merger of Deepak Fertilizer & Petrochemical Corporation Ltd (DFPCL) and Manga...
More from shaunoff
5. using electromagnets
Lifts, cars, and other large electrical machines use high currents. Relays use an electromagnet to allow a small current in one circuit to control a large current in another circuit. This allows a small current to control whether a large current flows through another circuit by closing or opening a switch.
2
The circuit for a door bell contains an electromagnet that pulls an armature towards it when the circuit is closed, causing a hammer to strike the bell and produce sound. The movement of the armature then breaks the circuit, allowing the hammer to return to its original position, and this sequence repeats to make the bell ring continuously whenever the door bell button is pressed.
1
An electromagnet on a recycling plant conveyor belt is used to pick up and move metal cans. Electromagnets attract ferromagnetic metals like iron, nickel, and cobalt. Electromagnets have the advantage over permanent magnets in that their magnetic field can be switched on and off by controlling the electric current running through the magnet coils.
5
The document presents results from an experiment investigating electromagnets. It shows that increasing the number of coils or the current in an electromagnet increases the number of drawing pins attracted. Graphs illustrate the direct relationship between the number of coils/current and the number of drawing pins attracted.
4
An experiment was designed to investigate how changing the current and number of coils affects the strength of an electromagnet. The apparatus shown could be used by altering the current running through the coils or changing the number of coils wrapped around the iron core, then measuring the effect on the magnetic force produced. Results could show that increasing either the current or number of coils strengthens the electromagnet.
3
The document discusses two experiments that can investigate factors affecting the strength of an electromagnet other than the presence of an iron core. The first experiment would examine how the number of coils influences the number of drawing pins attracted while keeping current the same. The second would look at how the size of the current affects the number of pins for a constant number of coils.
6. halides
Halides are compounds formed between halogens (F, Cl, Br, I) and metals. They have many industrial, medical, and household applications. Halides can be identified by their reaction with silver nitrate solution to form precipitates of insoluble silver halides. The hydrogen halides are colorless gases with hydrogen fluoride having an unexpectedly high boiling point due to hydrogen bonding between H-F molecules. Larger halide ions are more reactive reducing agents as their outer electrons are farther from the nucleus and more easily donated.
3. group 7
The document discusses the chemical properties of the halogens (fluorine, chlorine, bromine, iodine, astatine) by examining their reactivity trends down the group in reactions with iron wool and hydrogen. It notes that reactivity decreases down the group, with chlorine causing iron wool to burn brightly, bromine less so, and iodine only slightly. It also examines the halogens' reactions with metals like sodium and nonmetals like hydrogen to form halides, and displacement reactions between halogens and halide ions.
2. group 1
The document discusses the chemical properties of alkali metals. It explains that alkali metals react vigorously with oxygen and water. The reactivity increases down the group as the atoms get larger, shielding the outer electrons from the nucleus and making them easier to lose. Equations for reactions of lithium, sodium, and potassium with oxygen, water, and other substances are provided. Flame tests for group 2 metals are also discussed.
5.displacement
The document discusses the chemical properties of halogens, specifically their oxidizing abilities in displacement reactions. It states that in displacement reactions between halogens and halides, the halogen acts as an oxidizing agent by oxidizing the halide ion and being reduced to form the halide ion itself. The order of increasing oxidizing ability among the halogens is F > Cl > Br > I. An example reaction of chlorine displacing bromine is provided, and it is explained that in the reaction, chlorine is reduced while bromide is oxidized.
1. group 0
The document discusses the properties and discovery of noble gases. It notes that:
- Noble gases (group 0) are very unreactive due to their full outer electron shells. This stability makes them similar across the group.
- Helium was first discovered on the sun in 1868. Argon was discovered in the 1890s after nitrogen from air was found to contain a small quantity of an inert element.
- Ramsay realized argon needed its own group and later discovered it contained traces of other noble gases - neon, krypton, and xenon. Radon was discovered in 1900.
4
The document discusses how changing the pressure affects the equilibrium of reversible gas reactions. It states that if the pressure is increased, the equilibrium will shift in the direction that decreases the number of gas molecules. If the pressure is decreased, the equilibrium will shift in the direction that increases the number of gas molecules. It also provides the example of nitrogen dioxide and dinitrogen tetroxide, explaining that if the pressure of this system is increased, more dinitrogen tetroxide will be produced.
3
Increasing the concentration of a substance in a reversible reaction shifts the equilibrium to decrease the concentration of that substance. For example, adding more water to a reaction producing bismuth oxychloride and hydrochloric acid from bismuth chloride and water would shift the equilibrium right, producing more products. Similarly, adding more chlorine gas to a reaction producing iodine trichloride from chlorine and iodine chloride would make the mixture appear more yellow by shifting the equilibrium to the right.
2
The document discusses exothermic and endothermic reactions. It states that all reactions are exothermic in one direction, releasing heat, and endothermic in the other direction, absorbing heat. It also explains that if temperature is increased, the equilibrium will shift in the endothermic direction to decrease temperature, and if temperature is decreased, the equilibrium will shift in the exothermic direction to increase temperature. It provides the example of nitrogen dioxide and dinitrogen tetroxide, where the forward reaction is exothermic and the backward reaction is endothermic. If temperature is increased in this system, more nitrogen dioxide will be produced.
5
Catalysts speed up chemical reactions by lowering the activation energy of the reaction pathway, without being used up in the process. When added to a reversible reaction, a catalyst increases the rates of both the forward and reverse reactions equally, resulting in no change to the equilibrium position but equilibrium being reached faster. Catalysts are particularly important in industrial applications as they allow reactions to proceed more quickly.
1
Le Chatelier's principle states that if a system in dynamic equilibrium experiences a change, the equilibrium will shift to counteract the change. Specifically, increasing temperature shifts equilibrium towards the endothermic direction, increasing concentration shifts equilibrium away from that substance, and increasing pressure shifts equilibrium away from the gas producing side.
IB 3.2.2.5
The melting points of elements in group 1 decrease down the group because the atomic radius increases, resulting in weaker metallic bonds and a weaker attraction between the nucleus and delocalized electrons. The melting points given for lithium, sodium, potassium, rubidium, and cesium show this decreasing trend.
IB 3.2.2.4
Electronegativity decreases down a group because the atomic radius increases and shielding increases due to electrons filling new principal energy levels, making the increased nuclear charge less significant. Therefore, iodine has a larger atomic radius and attracts electron density in a covalent bond less strongly than fluorine.
IB3.2.2.2
The document discusses trends in ionic radii for cations and anions. It explains that for both group 1 and group 7 elements, ionic radii increase down the group as the outer energy level moves further from the nucleus. For cations, ionic radii are smaller than atomic radii because cations have fewer electrons and greater nuclear attraction. For anions, ionic radii are larger than atomic radii because anions have more electrons and weaker nuclear attraction. Tables of atomic and ionic radii are provided for alkali metals and halogens to illustrate these trends.
IGCSE 11.5.4
Dynamic equilibrium occurs in reversible reactions where the forward and backward reactions proceed at the same rate, resulting in no net change in the amounts of reactants and products despite the reactions being ongoing. It can only exist within a closed system to prevent products from escaping. The position of dynamic equilibrium depends on factors like temperature and concentration, and may favor either reactants or products, rather than having equal amounts of both.
More from shaunoff (20)
4. g7 and g1
- 1. 3.3.1 Chem. Properties of groups Chem. Properties of groups •Discuss the similarities and differences in the chemical properties of elements in the same group
- 2. How do alkali metals react with chlorine? Alkali metals burst into flames when heated and added to chlorine. They form metal chlorides. alkali metal + chlorine alkali metal chloride The word and chemical equations for the reaction between lithium and chlorine are: lithium + chlorine lithium chloride 2Li (s) + Cl2 (g) 2LiCl (s) What are the word and chemical equations for the reaction that produces sodium chloride? sodium + chlorine sodium chloride 2Na (s) + Cl2 (g) 2NaCl (s)
Editor's Notes
- Boardworks GCSE Additional Science: Chemistry The Alkali Metals