2. Addition and Subtraction.pptx
•Download as PPTX, PDF•
0 likes•43 views
The document discusses addition and subtraction operations in MIPS and overflow. It provides examples of addition and subtraction for both unsigned and signed integers. For unsigned integers, overflow occurs when the result is larger than the maximum value that can be represented. For signed integers in sign-magnitude format, overflow occurs when subtraction results in a number outside the range of the available bits. The document contains examples of calculations and determines whether overflow, underflow, or neither occurs.
Report
Share
Report
Share
Recommended
Binary addition and subtraction
Audio Version available in YouTube Link : www.youtube.com/Aksharam
subscribe the channal
Computer Architecture and Organization
V semester
Anna University
By
Babu M, Assistant Professor
Department of ECE
RMK College of Engineering and Technology
Chennai
Decimal arithematic operation
This document discusses decimal arithmetic operations using binary coded decimal (BCD) numbers. It describes how decimal numbers are represented in BCD format and processed using microoperations in the arithmetic logic unit (ALU). Addition and subtraction of decimal numbers are performed by converting the numbers to BCD, performing binary addition or subtraction on the digits, and converting the output back to decimal if needed. Block diagrams of BCD adders and examples of decimal addition and subtraction are provided.
Fi aa realization document
The document outlines the steps to set up fixed asset accounting in SAP including:
1) Creating various asset master records using transaction code AS01.
2) Creating vendor master records using transaction code XK01.
3) Posting the acquisition costs of assets using transaction code F-90.
4) Running the depreciation process using transaction code AFAB.
5) Retiring assets using various transaction codes like ABAON and F-92.
6) Additional steps like reversing postings, purchases from materials management modules are also covered.
Chp2 introduction to the 68000 microprocessor copy
The document provides an introduction to the 68k microprocessor instruction set. It discusses the different types of instructions including data transfer, arithmetic, logical, and bit manipulation instructions. It describes the various addressing modes used by the 68k including register direct, absolute, PC relative, register indirect, and immediate addressing. Examples are given of instructions like MOVE, ADD, SUB, and MUL using different addressing modes and data sizes. The operation of the instruction cycle is explained, showing the fetch, decode, and execute phases for each instruction.
04 comb ex
this ppt ia about combinational logic and we can learn how to formalize some problems by given techniques
Cash flow and cost of capital pdf
The document discusses key concepts related to cash flow and cost of capital. It provides definitions and formulas for various cash flow terms including:
- Cash flow from operating activities (CFO) which is net profit plus non-cash expenses/revenues and changes in working capital items.
- Cash flow from investing activities (CFI) which is cash flows from investments in or sales of long-term operating assets.
- Cash flow from financing activities (CFF) which is flows from changes in debt, equity or dividends.
- Free cash flow (FCF) which is cash flow from operating activities plus cash flow from investments in operating assets, available to providers of capital.
Ch_10.pptx.pdf
This document summarizes computer arithmetic concepts including addition, subtraction, multiplication, and division algorithms for signed magnitude and two's complement numbers. It provides examples of performing arithmetic operations on signed numbers using these algorithms. It also describes the hardware design and flowcharts needed to execute arithmetic instructions on a computer.
Flying High With Data Analytics & Optimization - Aviation Industry By Korina ...
Have you ever wondered how Aviation Industry with its complexity manages their big data to optimize their operations? This session is to discuss importance of data analytics in aviation industry operations as it uncovers hidden patterns, unknown correlations, market trends, customer preferences and other useful information. It is useful to airline operations in making efficient PI projects to provide well-informed business decision.
The answer is hiding in your data sets, let’s leverage in our analytics journey!
What gets measured gets managed. Your data will talk to you, if you’re willing to listen.
Recommended
Binary addition and subtraction
Audio Version available in YouTube Link : www.youtube.com/Aksharam
subscribe the channal
Computer Architecture and Organization
V semester
Anna University
By
Babu M, Assistant Professor
Department of ECE
RMK College of Engineering and Technology
Chennai
Decimal arithematic operation
This document discusses decimal arithmetic operations using binary coded decimal (BCD) numbers. It describes how decimal numbers are represented in BCD format and processed using microoperations in the arithmetic logic unit (ALU). Addition and subtraction of decimal numbers are performed by converting the numbers to BCD, performing binary addition or subtraction on the digits, and converting the output back to decimal if needed. Block diagrams of BCD adders and examples of decimal addition and subtraction are provided.
Fi aa realization document
The document outlines the steps to set up fixed asset accounting in SAP including:
1) Creating various asset master records using transaction code AS01.
2) Creating vendor master records using transaction code XK01.
3) Posting the acquisition costs of assets using transaction code F-90.
4) Running the depreciation process using transaction code AFAB.
5) Retiring assets using various transaction codes like ABAON and F-92.
6) Additional steps like reversing postings, purchases from materials management modules are also covered.
Chp2 introduction to the 68000 microprocessor copy
The document provides an introduction to the 68k microprocessor instruction set. It discusses the different types of instructions including data transfer, arithmetic, logical, and bit manipulation instructions. It describes the various addressing modes used by the 68k including register direct, absolute, PC relative, register indirect, and immediate addressing. Examples are given of instructions like MOVE, ADD, SUB, and MUL using different addressing modes and data sizes. The operation of the instruction cycle is explained, showing the fetch, decode, and execute phases for each instruction.
04 comb ex
this ppt ia about combinational logic and we can learn how to formalize some problems by given techniques
Cash flow and cost of capital pdf
The document discusses key concepts related to cash flow and cost of capital. It provides definitions and formulas for various cash flow terms including:
- Cash flow from operating activities (CFO) which is net profit plus non-cash expenses/revenues and changes in working capital items.
- Cash flow from investing activities (CFI) which is cash flows from investments in or sales of long-term operating assets.
- Cash flow from financing activities (CFF) which is flows from changes in debt, equity or dividends.
- Free cash flow (FCF) which is cash flow from operating activities plus cash flow from investments in operating assets, available to providers of capital.
Ch_10.pptx.pdf
This document summarizes computer arithmetic concepts including addition, subtraction, multiplication, and division algorithms for signed magnitude and two's complement numbers. It provides examples of performing arithmetic operations on signed numbers using these algorithms. It also describes the hardware design and flowcharts needed to execute arithmetic instructions on a computer.
Flying High With Data Analytics & Optimization - Aviation Industry By Korina ...
Have you ever wondered how Aviation Industry with its complexity manages their big data to optimize their operations? This session is to discuss importance of data analytics in aviation industry operations as it uncovers hidden patterns, unknown correlations, market trends, customer preferences and other useful information. It is useful to airline operations in making efficient PI projects to provide well-informed business decision.
The answer is hiding in your data sets, let’s leverage in our analytics journey!
What gets measured gets managed. Your data will talk to you, if you’re willing to listen.
Signed Addition And Subtraction
This document presents information on signed number representation and algorithms for signed addition and subtraction. It discusses signed magnitude, 1's complement, and 2's complement representations. It provides examples and flowcharts for the addition and subtraction algorithms in signed magnitude representation. The algorithms treat the signs and magnitudes separately. For hardware implementation, it shows how a parallel adder, complementer, and mode control can be used to perform signed addition and subtraction.
11. 8085 programming example iii
The document describes instructions related to input/output, stack operations, and machine control for the 8085 microprocessor. It provides examples of programs for 8-bit division and calculating the square of a number using a lookup table. The division program uses subtraction and increment operations to repeatedly divide the dividend by the divisor until the remainder is obtained. The square program uses the lookup table at address 26H to find the square of the data in register L and store it in memory.
Chp4_C++_Control Structures-Part2_Iteration.pptx
The document discusses repetition structures or loops in C++ programming. It covers the for, while, and do-while loop structures. The for loop has an initialization, condition, and update statement. It repeats until the condition is false. The while loop checks the condition first before executing the code block. The do-while loop executes the code block at least once before checking the condition. Examples are provided to demonstrate how each loop type works. Break and continue statements are also covered, with break exiting the entire loop and continue skipping to the next iteration.
Free video lectures for mca
This document provides an overview of register transfer and microoperations in computer architecture. It discusses register transfer language, register transfer, bus and memory transfers, and different types of microoperations including arithmetic, logic, and shift operations. Diagrams and examples are provided to illustrate concepts like register transfer, bus structure, arithmetic circuits, logic functions, and shift operations. The document is intended to teach fundamental concepts related to the low-level implementation of operations in a computer's central processing unit.
c++ program using All data type and operators
1. declared and initialized usinf different data types
2. using do-while & switch case concept
3. all operators are used like arithmetic , logical, increment& decrement, relational & bitwise operator
Arithmetic for computers which talks about
The document discusses number formats and arithmetic for computers. It covers unsigned and signed integers, two's complement representation, and arithmetic operations like addition, subtraction, and comparison. It also discusses designing an arithmetic logic unit (ALU) to perform these operations, including how to build a 32-bit ALU from 1-bit full adder cells and techniques to reduce delay like carry lookahead addition.
dd_sampleslides.ppt
This document discusses digital design topics including:
1. Converting between representations such as equations, truth tables, and circuits.
2. Using decoders to illuminate lights in a countdown display.
3. The design process for a finite state machine controller including an example of a laser timer controller.
4. How registers can be used to store and display present and saved weights in a scale.
5. How a magnitude comparator works by comparing inputs in a carry-ripple style from least to most significant bits.
HBASE Performane Test
The document discusses performance testing of HBase using YCSB (Yahoo! Cloud Serving Benchmark). It details steps taken to build and configure YCSB to work with HBase on a CDH cluster, load 50 million records into an HBase table, and run YCSB workload tests in modes A-K with threading from 1 to 128. Graphs show results for throughput, latency for each workload and threading configuration. The HBase environment consisted of 3 region servers and 10 data nodes on CentOS 6.5 servers with a total of 990GB memory and 24 CPU cores across servers.
TC74VHCT04AFN PSpice Model (Free SPICE Model)
This document provides a SPICE model for a Toshiba TC74VHCT04AFN CMOS digital integrated circuit. It includes:
1) A circuit schematic showing the 6 inverters in the device and their connections.
2) SPICE subcircuit models for each inverter and input/output ports.
3) Parameters for propagation delays, input/output voltage levels and other timing characteristics as measured versus simulated results.
how computers do math from patterson and hennessey book
The document discusses different number formats and arithmetic operations used in computers. It begins by describing types of numbers like integer, floating point, and their range and precision. It then provides a taxonomy of different data types computers can represent, such as numeric, non-numeric, fixed-point, floating-point, and others. The document then goes into more detail about unsigned and signed integer representations, including two's complement. It explains how two's complement arithmetic works for addition, subtraction, and comparisons. Finally, it discusses designing the arithmetic logic unit and different adder implementations like ripple-carry and carry-lookahead adders.
Mba admission in india
- The document discusses register transfer language and micro operations, which involve transferring binary data between registers and performing arithmetic, logic, and shift operations on data stored in registers.
- It describes the basic components of a central processing unit, including registers, arithmetic logic units, multiplexers, and control units that coordinate micro operations.
- Micro operations include arithmetic operations like addition, subtraction, and increment/decrement, as well as logic operations like AND, OR, XOR, and shifts that manipulate data at the bit level.
Lab 9 D-Flip Flops: Shift Register and Sequence Counter
This document describes an experiment involving designing a 4-bit shift register and sequence counter using D-flip flops. It includes building the circuits in an FPGA tool, simulating their operation, and downloading them to a development board. A debouncing circuit is added to prevent erroneous output from noisy button inputs. The objectives of introducing sequential circuit design and implementing a shift register and sequence counter are met.
Extrato
The document is a bank statement summarizing deposits and transfers into a savings account from February 7th to 26th. There were numerous cash deposits and electronic transfers totaling over 1,755 Brazilian reals. The deposits and transfers were made on various dates throughout the period. The ending balance on the 26th was 1,755.81 Brazilian reals.
Chp5 pic microcontroller instruction set copy
The document provides an outline and descriptions of the instruction set for PIC microcontrollers, including common instructions like MOVLW, ADDWF, ANDLW, CALL, RETURN, and SLEEP. It describes the functionality of each instruction, their operands, and how they affect status register bits. Examples are given to illustrate how each instruction works and the resulting register values.
Chapter 5The proessor status and the FLAGS registers
solution manual to COMPUTER ORGANIZATION AND ASSEMBLY LANGUAGE CHAPTER 5.
If you find any mistake in the manual please share with me ... it will be appreciated
Chapter 4 combinational_logic
The document discusses combinational circuits and their analysis and design. It provides the following key points:
1) Combinational circuits have outputs that are a function of inputs only, with no feedback or memory. When inputs change, outputs may change after a delay.
2) To analyze a combinational circuit, its function is determined from either a boolean expression or truth table. To design one, a function is specified and a circuit is determined to achieve it.
3) Analysis examples include deriving boolean expressions and truth tables from circuits. Design examples include creating circuits to achieve specified functions like binary addition and BCD to excess-3 conversion.
3. Virtual Memory.pptx
The document discusses different approaches to virtual memory including overlays, paging, and segmentation. Paging maps program addresses to RAM addresses through indirection to allow programs to access more memory than physically available. Segmentation divides RAM into segments allocated to each program to isolate programs and improve security while still allowing an illusion of unlimited memory through virtual addressing.
2. Cache Mapping.pptx
This document discusses different cache mapping techniques including direct mapping, associative mapping, and set-associative mapping. It provides examples of direct mapping where the main memory is divided into pages that map to cache frames. Direct mapping allows only one main memory page to map to each cache frame based on the page number. Associative mapping allows any main memory page to map to any cache frame by using a content addressable memory. Set-associative mapping groups cache frames into sets, and each main memory page can map to one of the frames within a set. The document also gives an example of how cache hit rates can be different between direct mapping, 2-way set associative mapping, and fully associative mapping.
1. Introduction to Memory.pptx
The document discusses memory and input/output organization in computer architecture. It covers topics like memory hierarchy, cache memory, virtual memory, parallel and serial bus architectures, and input/output devices. Specifically, it describes the memory hierarchy from fastest to slowest as CPU cache, RAM, and hard disk drive. It also explains the different levels of CPU cache memory (L1, L2, L3) and how they improve processing speed.
6. ILP.pptx
1) Instruction level parallelism (ILP) refers to executing multiple instructions simultaneously by exploiting parallelism between independent instructions.
2) Methods to increase ILP include increasing the pipeline depth, replicating pipeline components to launch multiple instructions per stage, and using multiple issue to dispatch two or more instructions per cycle.
3) Static multiple issue uses the compiler to package instructions into issue packets for simultaneous issue, while dynamic multiple issue relies on hardware to dynamically schedule instructions during execution to overcome hazards and dependencies.
5. Exception.pptx
An exception is an unexpected event that occurs internally in the processor and disrupts program execution, while an interrupt is an external event that causes an exception. There are three types of exceptions: arithmetic overflow, undefined instruction, and system call. When an exception occurs, the processor saves the program counter, sets the cause register, disables further exceptions, and jumps to an exception handler. To return, the handler restores the program counter and reenables exceptions. Multiple exceptions can be handled with polled or vectored interrupts.
More Related Content
Similar to 2. Addition and Subtraction.pptx
Signed Addition And Subtraction
This document presents information on signed number representation and algorithms for signed addition and subtraction. It discusses signed magnitude, 1's complement, and 2's complement representations. It provides examples and flowcharts for the addition and subtraction algorithms in signed magnitude representation. The algorithms treat the signs and magnitudes separately. For hardware implementation, it shows how a parallel adder, complementer, and mode control can be used to perform signed addition and subtraction.
11. 8085 programming example iii
The document describes instructions related to input/output, stack operations, and machine control for the 8085 microprocessor. It provides examples of programs for 8-bit division and calculating the square of a number using a lookup table. The division program uses subtraction and increment operations to repeatedly divide the dividend by the divisor until the remainder is obtained. The square program uses the lookup table at address 26H to find the square of the data in register L and store it in memory.
Chp4_C++_Control Structures-Part2_Iteration.pptx
The document discusses repetition structures or loops in C++ programming. It covers the for, while, and do-while loop structures. The for loop has an initialization, condition, and update statement. It repeats until the condition is false. The while loop checks the condition first before executing the code block. The do-while loop executes the code block at least once before checking the condition. Examples are provided to demonstrate how each loop type works. Break and continue statements are also covered, with break exiting the entire loop and continue skipping to the next iteration.
Free video lectures for mca
This document provides an overview of register transfer and microoperations in computer architecture. It discusses register transfer language, register transfer, bus and memory transfers, and different types of microoperations including arithmetic, logic, and shift operations. Diagrams and examples are provided to illustrate concepts like register transfer, bus structure, arithmetic circuits, logic functions, and shift operations. The document is intended to teach fundamental concepts related to the low-level implementation of operations in a computer's central processing unit.
c++ program using All data type and operators
1. declared and initialized usinf different data types
2. using do-while & switch case concept
3. all operators are used like arithmetic , logical, increment& decrement, relational & bitwise operator
Arithmetic for computers which talks about
The document discusses number formats and arithmetic for computers. It covers unsigned and signed integers, two's complement representation, and arithmetic operations like addition, subtraction, and comparison. It also discusses designing an arithmetic logic unit (ALU) to perform these operations, including how to build a 32-bit ALU from 1-bit full adder cells and techniques to reduce delay like carry lookahead addition.
dd_sampleslides.ppt
This document discusses digital design topics including:
1. Converting between representations such as equations, truth tables, and circuits.
2. Using decoders to illuminate lights in a countdown display.
3. The design process for a finite state machine controller including an example of a laser timer controller.
4. How registers can be used to store and display present and saved weights in a scale.
5. How a magnitude comparator works by comparing inputs in a carry-ripple style from least to most significant bits.
HBASE Performane Test
The document discusses performance testing of HBase using YCSB (Yahoo! Cloud Serving Benchmark). It details steps taken to build and configure YCSB to work with HBase on a CDH cluster, load 50 million records into an HBase table, and run YCSB workload tests in modes A-K with threading from 1 to 128. Graphs show results for throughput, latency for each workload and threading configuration. The HBase environment consisted of 3 region servers and 10 data nodes on CentOS 6.5 servers with a total of 990GB memory and 24 CPU cores across servers.
TC74VHCT04AFN PSpice Model (Free SPICE Model)
This document provides a SPICE model for a Toshiba TC74VHCT04AFN CMOS digital integrated circuit. It includes:
1) A circuit schematic showing the 6 inverters in the device and their connections.
2) SPICE subcircuit models for each inverter and input/output ports.
3) Parameters for propagation delays, input/output voltage levels and other timing characteristics as measured versus simulated results.
how computers do math from patterson and hennessey book
The document discusses different number formats and arithmetic operations used in computers. It begins by describing types of numbers like integer, floating point, and their range and precision. It then provides a taxonomy of different data types computers can represent, such as numeric, non-numeric, fixed-point, floating-point, and others. The document then goes into more detail about unsigned and signed integer representations, including two's complement. It explains how two's complement arithmetic works for addition, subtraction, and comparisons. Finally, it discusses designing the arithmetic logic unit and different adder implementations like ripple-carry and carry-lookahead adders.
Mba admission in india
- The document discusses register transfer language and micro operations, which involve transferring binary data between registers and performing arithmetic, logic, and shift operations on data stored in registers.
- It describes the basic components of a central processing unit, including registers, arithmetic logic units, multiplexers, and control units that coordinate micro operations.
- Micro operations include arithmetic operations like addition, subtraction, and increment/decrement, as well as logic operations like AND, OR, XOR, and shifts that manipulate data at the bit level.
Lab 9 D-Flip Flops: Shift Register and Sequence Counter
This document describes an experiment involving designing a 4-bit shift register and sequence counter using D-flip flops. It includes building the circuits in an FPGA tool, simulating their operation, and downloading them to a development board. A debouncing circuit is added to prevent erroneous output from noisy button inputs. The objectives of introducing sequential circuit design and implementing a shift register and sequence counter are met.
Extrato
The document is a bank statement summarizing deposits and transfers into a savings account from February 7th to 26th. There were numerous cash deposits and electronic transfers totaling over 1,755 Brazilian reals. The deposits and transfers were made on various dates throughout the period. The ending balance on the 26th was 1,755.81 Brazilian reals.
Chp5 pic microcontroller instruction set copy
The document provides an outline and descriptions of the instruction set for PIC microcontrollers, including common instructions like MOVLW, ADDWF, ANDLW, CALL, RETURN, and SLEEP. It describes the functionality of each instruction, their operands, and how they affect status register bits. Examples are given to illustrate how each instruction works and the resulting register values.
Chapter 5The proessor status and the FLAGS registers
solution manual to COMPUTER ORGANIZATION AND ASSEMBLY LANGUAGE CHAPTER 5.
If you find any mistake in the manual please share with me ... it will be appreciated
Chapter 4 combinational_logic
The document discusses combinational circuits and their analysis and design. It provides the following key points:
1) Combinational circuits have outputs that are a function of inputs only, with no feedback or memory. When inputs change, outputs may change after a delay.
2) To analyze a combinational circuit, its function is determined from either a boolean expression or truth table. To design one, a function is specified and a circuit is determined to achieve it.
3) Analysis examples include deriving boolean expressions and truth tables from circuits. Design examples include creating circuits to achieve specified functions like binary addition and BCD to excess-3 conversion.
Similar to 2. Addition and Subtraction.pptx (17)
how computers do math from patterson and hennessey book
how computers do math from patterson and hennessey book
Lab 9 D-Flip Flops: Shift Register and Sequence Counter
Lab 9 D-Flip Flops: Shift Register and Sequence Counter
Chapter 5The proessor status and the FLAGS registers
Chapter 5The proessor status and the FLAGS registers
More from KarthikeyanC53
3. Virtual Memory.pptx
The document discusses different approaches to virtual memory including overlays, paging, and segmentation. Paging maps program addresses to RAM addresses through indirection to allow programs to access more memory than physically available. Segmentation divides RAM into segments allocated to each program to isolate programs and improve security while still allowing an illusion of unlimited memory through virtual addressing.
2. Cache Mapping.pptx
This document discusses different cache mapping techniques including direct mapping, associative mapping, and set-associative mapping. It provides examples of direct mapping where the main memory is divided into pages that map to cache frames. Direct mapping allows only one main memory page to map to each cache frame based on the page number. Associative mapping allows any main memory page to map to any cache frame by using a content addressable memory. Set-associative mapping groups cache frames into sets, and each main memory page can map to one of the frames within a set. The document also gives an example of how cache hit rates can be different between direct mapping, 2-way set associative mapping, and fully associative mapping.
1. Introduction to Memory.pptx
The document discusses memory and input/output organization in computer architecture. It covers topics like memory hierarchy, cache memory, virtual memory, parallel and serial bus architectures, and input/output devices. Specifically, it describes the memory hierarchy from fastest to slowest as CPU cache, RAM, and hard disk drive. It also explains the different levels of CPU cache memory (L1, L2, L3) and how they improve processing speed.
6. ILP.pptx
1) Instruction level parallelism (ILP) refers to executing multiple instructions simultaneously by exploiting parallelism between independent instructions.
2) Methods to increase ILP include increasing the pipeline depth, replicating pipeline components to launch multiple instructions per stage, and using multiple issue to dispatch two or more instructions per cycle.
3) Static multiple issue uses the compiler to package instructions into issue packets for simultaneous issue, while dynamic multiple issue relies on hardware to dynamically schedule instructions during execution to overcome hazards and dependencies.
5. Exception.pptx
An exception is an unexpected event that occurs internally in the processor and disrupts program execution, while an interrupt is an external event that causes an exception. There are three types of exceptions: arithmetic overflow, undefined instruction, and system call. When an exception occurs, the processor saves the program counter, sets the cause register, disables further exceptions, and jumps to an exception handler. To return, the handler restores the program counter and reenables exceptions. Multiple exceptions can be handled with polled or vectored interrupts.
4. Pipeline Hazards.pptx
The document discusses different types of pipeline hazards including structural hazards, data hazards, and control hazards. It describes data hazards that occur due to dependencies between instructions as read after write, write after read, and write after write hazards. Methods to overcome data hazards include forwarding, stalling, and reordering instructions. Control hazards occur due to branches, and can be addressed through stalling, prediction, or delayed branching. Dynamic branch prediction uses 1-bit or 2-bit prediction schemes stored in a branch history table to more accurately predict branches.
3. Implementation of Pipelining in Datapath.pptx
The document discusses pipelining in CPU instruction execution. It describes the typical 5 stages of instruction execution: fetch, decode, execute, memory access, and write back. It shows how pipelining allows overlapping execution of multiple instructions across the stages, improving instruction throughput compared to single-cycle execution where each instruction must complete all stages before the next begins. Pipelining is implemented by dividing the CPU datapath into independent stages that each complete a part of the instruction execution process in parallel.
2. Datapath Design with Control Unit.pptx
The document discusses the data path and control unit for different types of instructions in a CPU. It describes three main types of instructions - memory reference using load and store instructions like lw and sw, arithmetic/logical instructions like add and sub, and branch instructions like beq. It then provides examples of each type of instruction and illustrates the simple data path used to process R-type, load/store, and branch instructions respectively.
1. Introduction to Datapath Design.pptx
The document discusses the processor unit and its components. It describes the different types of instructions like memory reference, arithmetic logical, and branch/jump. The key components of a datapath include a program counter, instruction memory, adder, register file, ALU, data memory, and multiplexers. Memory reference instructions use the adder, arithmetic instructions use the ALU, and branch instructions use a subtractor to evaluate the branch condition. A branch datapath also includes a separate adder to compute the branch target.
Floating Point Multiplication.pptx
The document describes the floating point multiplication algorithm in 5 steps:
1) Convert the numbers to normalized binary representation.
2) Add the exponents.
3) Multiply the significant bits.
4) Normalize the product and round the significant bits if needed.
5) Set the sign of the product.
It then provides an example of multiplying 0.5 and -0.4375 in binary using this algorithm.
Floating Point Addition.pptx
This document describes the floating point addition algorithm and provides two examples of performing floating point addition in binary. The algorithm involves 4 steps: 1) Convert the numbers to normalized binary, 2) Compare the exponents and match the larger one, 3) Add the significant bits, and 4) Normalize and round the sum if needed. The examples show applying this algorithm to add 0.5 and 0.4375, yielding 0.9375, and to add 10.01101 x 21 and 0.00101101 x 22, yielding 1.01100001 x 22.
Floating Point Represenataion.pptx
The document discusses binary floating point representation in IEEE 754 format. It explains the components of a floating point number, including the sign bit, mantissa/fraction, and exponent. It provides examples of single and double precision representations. Finally, it briefly introduces the IEEE 754 half precision format which uses 16 bits with a 5 bit exponent and 10 bit mantissa.
Refined Version of Division.pptx
This document describes an improved version of the division algorithm for unsigned binary division. It presents the steps to divide 7 by 3 as an example, showing the divisor, remainder, and operations at each step. The improved algorithm shifts and restores the remainder at each step rather than just subtracting the divisor. In the end, it correctly calculates a quotient of 2 and remainder of 1, matching 7 divided by 3.
Version 1 Division.pptx
The document describes version 1 of a binary division algorithm. It provides an example of using the algorithm to calculate the quotient and remainder of 7 divided by 3 in binary. The algorithm works by repeatedly subtracting the divisor from the remainder, shifting the quotient left by 1 bit and shifting the divisor right by 1 bit until the remainder is smaller than the divisor. For the example calculation, the quotient is calculated to be 2 and the remainder is 1.
BOOTH’s ALGORITHM Part 1.pptx
Booth's algorithm is a method for multiplying two binary numbers, including positive and negative numbers, by recoding the multiplier into {-1, 0, +1} and then multiplying the multiplicand by the recoded bits. For example, to multiply the positive numbers +13 and +7 in binary, the document shows recoding +7 as 0+1-1, multiplying +13 by each recoded bit, and adding the results to get the product of 91. The algorithm was created by Andrew Booth to speed up multiplication on early calculators.
1. Introduction to Arithmetic.pptx
The document discusses different numeric representation formats including fixed point, floating point, signed magnitude, one's complement, and two's complement. It provides examples of how fixed point and floating point numbers are represented and describes the process for converting positive and negative numbers to their one's and two's complement representations. Two's complement representation allows positive and negative numbers to be treated together and uses a single representation for zero.
6.Performance.pptx
This document discusses performance metrics for computing systems including response time, throughput, relative performance, CPU execution time, CPU time, and power dissipation. It defines CPU time as the sum of user CPU time and system CPU time. It also provides an equation for dynamic power dissipation that is proportional to the capacitance, voltage squared, and frequency of a computing system.
5. Addressing Modes.pptx
The document discusses different addressing modes in MIPS architecture including immediate, register, base/displacement, PC-relative, and pseudo direct addressing modes. It provides examples of instructions that use each addressing mode and describes how the effective address is calculated for each mode. The document also includes an example MIPS program and its hexadecimal object code.
3. Instruction Set.pptx
The document provides instructions on MIPS architecture and assembly language programming, including details about registers, instruction types such as arithmetic, data transfer, logical and branch instructions, and examples of how to write MIPS assembly code to perform operations like addition, subtraction, loading/storing data, and conditional branching. It also describes common instruction formats and how different instructions are used to implement an example program that performs an arithmetic calculation and stores the result conditionally based on two values being equal or not.
More from KarthikeyanC53 (20)
Recently uploaded
Types of Herbal Cosmetics its standardization.
Physiology and chemistry of skin and pigmentation, hairs, scalp, lips and nail, Cleansing cream, Lotions, Face powders, Face packs, Lipsticks, Bath products, soaps and baby product,
Preparation and standardization of the following : Tonic, Bleaches, Dentifrices and Mouth washes & Tooth Pastes, Cosmetics for Nails.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
CACJapan - GROUP Presentation 1- Wk 4.pdf
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Assessment and Planning in Educational technology.pptx
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Recently uploaded (20)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Assessment and Planning in Educational technology.pptx
Assessment and Planning in Educational technology.pptx
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
2. Addition and Subtraction.pptx
- 1. ADDITION & SUBTRACTION Mr. C.KARTHIKEYAN, ASSISTANT PROFESSOR, ECE , RMKCET
- 2. ADDITION & SUBTRACTION Un Signed Arithmetic Signed Arithmetic add addi sub The MIPS recognizes or ignores overflow by two kinds of arithmetic instructions addu addui subu cause exceptions on overflow do not cause exceptions on overflow
- 3. OVER FLOW? No Over Flow Over Flow Overflow occurs when the result from an operation cannot be represented with the available hardware Operation Operand A Operand B A + B > 0 < 0 A + B < 0 > 0 A – B > 0 > 0 A – B < 0 < 0 Eg: (+10) + (-6) = +4 (-10) + (+6) = -4 Eg: (+10) - (+6) = +4 (-10) - (-6) = -4
- 4. OVER FLOW? Over Flow Overflow occurs when the result from an operation cannot be represented with the available hardware Addition 10000 +10 01010 +6 00110 (+) Over Flow 10111 -5 1011 -4 1100 (+) Over Flow
- 5. OVER FLOW? Over Flow Overflow occurs when the result from an operation cannot be represented with the available hardware Subtraction 11100 +6 00110 -10 10110 (-) Over Flow 0110 -6 1010 +4 0100 (-) Over Flow
- 6. EXAMPLE Assume 185 and 122 are unsigned 8-bit decimal integers. Calculate 185 – 122. Is there over flow, under flow, or neither? 10111001 01111010 (-) 185 122 1 1 0 1 1 1 010 1 0 1 10 1 1 110 1 0 Neither Over Flow nor Under Flow Operation Operand A Operand B A + B > 0 < 0 A + B < 0 > 0 A – B > 0 > 0 A – B < 0 < 0 Computer Organization and Design by David A Patterson – Page no. 237 Condition for No Over Flow
- 7. EXAMPLE Assume 185 and 122 are signed 8-bit decimal integers stored in sign-magnitude format. Calculate 185 + 122. Is there over flow, under flow, or neither? 10111001 01111010 +122 (+) 185 122 1 1 0 0 1 1 0 Neither Over Flow nor Under Flow -57 1 1 1 1 10 Operation Operand A Operand B A + B > 0 < 0 A + B < 0 > 0 A – B > 0 > 0 A – B < 0 < 0 Computer Organization and Design by David A Patterson – Page no. 237 Condition for No Over Flow
- 8. EXAMPLE Assume 185 and 122 are signed 8-bit decimal integers stored in sign-magnitude format. Calculate 185 - 122. Is there over flow, under flow, or neither? 10111001 01111010 +122 (-) 185 122 1 1 1 1 1 1 0 Over Flow -57 0 Computer Organization and Design by David A Patterson – Page no. 237