Discuss the range of interactions that occur between human beings an.pdf

•

0 likes•2 views

Discuss the range of interactions that occur between human beings and the physical environment Solution Range of interactions that occur between human beings and the physical environment:Agrosystem is based on complex interaction between human and physical environment.this modification is done by humanbeings to facilitate production of food,fuel nd other related products.agrosystems are based on human and physical environment ineractions. in any agrosystem they are planned and associated diversity.according to the diversity that is planned,designed and imported by the farmer. these systems includes plants,animals, and microbes. the study of this is known as agroecology.floods,volcanoes ,earthquakes are always apart of physical environment.it ranges from chemicals,pestcides, chlouroforms and benzene..

Education

Similar to Discuss the range of interactions that occur between human beings an.pdf

Agro ecology Concept

PMAS Arid Agriculture University Rawalpindi, Pakistan

Ecology - Foundation Course Semester 2- Prof. Karishma Shetty

KarishmaShetty16

What is ecology

stevejosh333

ecology concepts and its types

alish debbarma

Nikhil chapter 1

anshu sharma

Ecology and Ecosystem

Yash Patel

Plant ecology (Important terms) [Part -1]

nishakataria10

Eco seminar

FP Studies

Echologicalconcepts and principles

Reena Yadav

Urbanecology and environmental planning

Samanth kumar

Energy flow in ecosystem

githure eliud

unit1-160623050328.pdf

DrSSureshAsstProfHS

unit1-160623050328.pdf

DrSSureshAsstProfHS

EVS-GE6351 UNIT 1 FULL

SASI KUMAR C

foundation lecture 2.pdf

BumBum28

1661590696701_EVS UNIT 1PPT -updated.pptx

nithyasriraman

Introduction to Ecology PPT

Effat Jahan

LECTURE 1.Ecology, subject and objectives.pptx

SumaiyaJabin3

Introduction to Ecology

Bulacan State University

Bio-diversity grade 9.pptx

AnilManage

Similar to Discuss the range of interactions that occur between human beings an.pdf (20)

Agro ecology Concept

Ecology - Foundation Course Semester 2- Prof. Karishma Shetty

What is ecology

ecology concepts and its types

Nikhil chapter 1

Ecology and Ecosystem

Plant ecology (Important terms) [Part -1]

Eco seminar

Echologicalconcepts and principles

Urbanecology and environmental planning

Energy flow in ecosystem

unit1-160623050328.pdf

EVS-GE6351 UNIT 1 FULL

foundation lecture 2.pdf

1661590696701_EVS UNIT 1PPT -updated.pptx

Introduction to Ecology PPT

LECTURE 1.Ecology, subject and objectives.pptx

Introduction to Ecology

Bio-diversity grade 9.pptx

More from eyeonsecuritysystems

For each step of DNA replication, predict the outcome if : • concentration of nitrogenous bases is low • primase is inhibited • DNA polymerase were inhibited • DNA ligase were inhibited • Helicase were inhibited Solution All the above situations lead to inhibition of DNA replication. Please find the below flow-chart regarding DNA replication for the better understanding. DNA Replication process Double-stranded DNA Helicase Separation of 2 strands Single stranded binding (SSB) proteins Binds with the separated strands and keeps them from reannealing Primase Primase creates the primer (DNA Polymerase starts working from primers) on both strands One strand acts as a Leading strand and other one is Lagging strand DNA Polymerase Addition of new DNA bases on the separated strands in the direction of 5’ to 3’ Ligase Fill the gaps between Okazaki fragments formed on Lagging strand Formation of two separate double-stranded DNAs.

For each step of DNA replication, predict the outcome if • concen.pdf

eyeonsecuritysystems

Explain why a virus can\'t infect every cell Explain why a virus can\'t infect every cell Solution Virus is a small infectous agent that present in every body ie.,humans,animals,organisms and also including bacteria and exists in the form of independent particles knwon as Virons.Virus cannot infect every cell because every cell in our body is resistant to virus and it has high immunity inorder to avoid attack from virus. If the immunity of the cells decreases then the chance of attacking by virus increases more and leads to some viral diseases such as viral fever etc..The diet which we take daily contains proteins and nutrients etc..will give full resistance to our body and also increases immunity. This perfect immunity in the body doesnt allow any virus attack on our cells and always keep us healthy..

Explain why a virus cant infect every cell Explain why a viru.pdf

eyeonsecuritysystems

Explain advantages and disadvantages of designing an OS kernel in layers (‘ring’ structure).? Solution Advantages: 1.seperate address space is not necessary. 2.switching among the address space is slow moving manipulation. 3.flexibility: protection scheme which is intented to indicate through a programming language is with the kernel method.modifications for a protection scheme the hardware is not necessary. Disadvantages: 1.application start up duration is lenghy. 2.Application often enact manipulations which are not type secure..

Explain advantages and disadvantages of designing an OS kernel in la.pdf

eyeonsecuritysystems

Explain three similarities and two diffrences in anaerobic and aerobic cellular respiration. Solution Difference: 1. Anaerobic respiration occurs without the presence of oxygen while aerobic respiration requires oxygen. 2. Substrates are not completely combusted in anaerobic respiration while in aerobic respiration, substrates are completely combusted. Similarities: 1. Both begin with the breakdown of sugar - glucose 2. Both produce ATP 3. Both takes place in eukaryotic cells 4. Process starts in cytosol.

Explain three similarities and two diffrences in anaerobic and aerob.pdf

eyeonsecuritysystems

Exercise 7-8 Kickapoo Company uses an imprest petty cash system. The fund was established on March 1 with a balance of $100 During March, the following petty cash receipts were found in the petty cash box. Date Receipt No. For Amount $39 13 3/5 Stamp Inventory Freight-out Miscellaneous Expense Travel Expense Miscellaneous Expense 2 4 14 5 8 The fund was replenished on March 15 when the fund contained $5 in cash. On March 20, the amount in the fund wa increased to $182. Journalize the entries in March that pertain to the operation of the petty cash fund. (Credit account titles are automatically indented when amount is entered. Do not indent manually.) Solution Date Account Titles and Explaination Debit Credit Mar-01 Petty $ 100 Cash $ 100 Mar-15 Postage expense $ 39 Freight out $ 13 Miscellaneous ($11 + $8) $ 19 Travel expense $ 22 Cash over $ 2 Cash ($100 - $5) $ 95 Mar-20 Petty ($182 - $100) $ 82 Cash $ 82.

Exercise 7-8 Kickapoo Company uses an imprest petty cash system. The .pdf

eyeonsecuritysystems

Discussions Grades people Syllabus Modules Google Drive D Question 1 hat is a major feature of the fungal life cycle? haploid and diploid phases alternate between generations only sexual reproduction is possible haploid phase dominates the life cycle the zygote is the dispersal stage 10 pts Next Solution Answer. Haploid and diploid phases alternates between generations. Following are incorrect : Zygote is the dispersal stage. Justification : In fungi, gametes fuse to form zygote which is diploid in nature. Zygote forms sporophyte which is dispersal stage. Only sexual reproduction is possible Justification : fungus have both asexual and sexual mode of reproduction Haploid phase dominates the life cycle. Justification : Both haploid and diploid phases occurs in fungal life cycle.

Discussions Grades people Syllabus Modules Google Drive D Question 1 .pdf

eyeonsecuritysystems

Critique the customer contact model. What are its strengths and weaknesses? Solution custome contact model describes the activities of costomer services. it includes support your customers, make them to contact us to their problems and querries, respond to the querries, oredering methods, tracking the orders, shopping features and payment methods. it is like customer centric, the benefits of this model is we can find satisfied customers and those customers will be with us for a longer period. the drawbacks are high cost and maintanance of customer database is very difficult..

Critique the customer contact model. What are its strengths and weak.pdf

eyeonsecuritysystems

Case Study Synlait Milk is an innovative dairy processing company that has experienced remarkable growth in a tough dairying environment. Since beginning manufacturing operations in 2008 Synlait Milk based in mid-Canterbury has grown its revenue to $759 million, its supply base to more than 200 farms and its staff to more than 550 people. Synlait Milk has performed very well on the back of global demand for safe, reliable, protein-rich foods. The company processes more than 700 litres of milk a year to produce a range of infant and adult nutritional milk products that it exports to more than 40 countries (Synlait, n.d.). Synlait was created by dairy farmers Barry Dingle and Juliet MacLean in partnership with John Penno, a senior scientist at Dexcel, the dairy industry’s research centre. Rather than supplying skimmed milk powder to Fonterra the trio were looking for ways to increase the value of the milk they produced. In particular, they were keen to develop innovative added-value milk products. Their vision was to build Synlait into a “major supplier of high-value, hightechnology ‘milk components’ to food producers worldwide.” (Oram, 2006). Synlait began in 2000 as a corporate farming business with the purchase of Robindale farm, one of the largest farms in New Zealand. By 2005 Synlait owned eight farms and in 2006 the decision was made to establish a manufacturing plant to produce innovative milk products. A growing customer base and considerable resources in milk powder production resulted in early growth for the company. As Synlait moved beyond ingredients manufacture to becoming a significant global supplier of infant nutritional products, Bright Dairy of China became a significant shareholder in 2010 (NZ Herald, 2010). To date Synlait’s strategy has focused exclusively on manufacture by selling select products to leading global food companies that own strong brands (Skellern, 2016). Alongside world-class processing facilities, Synlait Milk has established strong relationships with key players across the entire value chain including milk suppliers, market distributers and key customers, such as A2 Milk Company. Two key planks of Synlait’s strategy are its differentiated milk supply and its manufacturing excellence. Firstly, Synlait differentiates its product at the production stage through breeding and feeding technologies. This enables it to produce products that satisfy individual customer requirements. Secondly, Synlait’s specialist manufacturing facility allows flexibility to meet a range of individual customer specifications. Synlait listed in 2013 on the NZ stock exchange (Berry, 2013) and has experienced impressive growth, recording a net profit after tax of $38.2 million in 2017 up from 34.4 million in 2016. Synlait won the Deloitte Top 200 Best growth strategy for 2016. In 2016 Synlait announced plans to raise $98 million for a $300m expansion programme over the next three years including increasing its infant formula manufactur.

Case Study Synlait Milk is an innovative dairy processing company th.pdf

eyeonsecuritysystems

An entity with two multivalued attributes will be mapped as how many.pdf

eyeonsecuritysystems

Assume you are the new CEO of the Delta Phi Corporation. When the Board of Directors appointed you CEO, they indicated that a strategy for the next decade should be developed. In your discussion post, indicate (based on the readings, not just personal opinion) how you would think about the task of formulating a strategy for the company looking at the decade ahead. Special attention should be given to how the different views of strategy by Porter and Mintzberg would influence your approach.LIST ALL REFERENCES There are two people, and only two, whose ideas must be taught to every MBA in the world: Michael Porter and Henry Mintzberg. This was true more than 25 years ago, when I did my MBA at USC. These are two academics who have had real impact for a long time. Part of their success, beyond having big relevant ideas, is due to their clear and concise writing skills (There is certainly a lesson in there for many of us business school academics). Both have been very influential in the study of strategy, an area of considerable interest to many Forbes readers. You can contrast their two views as Porter’s taking a more deliberate strategy approach while Mintzberg’s emphasize emergent strategy. Both are still taught, in fact, I taught Porter’s 3 Generic Strategies and his 5 Forces Model not two weeks ago in an undergraduate strategy course at McGill. Which is most useful today? The world of deliberate strategy is one that I remember well from my days as a corporate manager at IBM and then as an executive teacher at Oxford and LBS. It was a world of strategy planning weekends at posh hotels in the English countryside, where we sat in rooms discussing the 5 Forces in our particular industry and what would we change in the model if we had a fairy\'s magic wand. The output was 3 ring binders in North America and 2 ring binders in Europe. This worked well in its day, back in the 80s and part of the 90s, wonderful times now looking back on it, when the past was quite helpful in predicting the future. However, the nature of the world today no longer lends itself, by in large, to this type of strategy. Emergent strategy is the view that strategy emerges over time as intentions collide with and accommodate a changing reality. Emergent strategy is a set of actions, or behavior, consistent over time, \"a realized pattern [that] was not expressly intended\" in the original planning of strategy. Emergent strategy implies that an organization is learning what works in practice. Given today’s world, I think emergent strategy is on the upswing. Here’s why. But first, in the interest of transparency, I have worked closely with Henry co-directing and co- teaching on Leadership Programs at McGill, where we are both on the faculty, for more than a decade. In fact, many times, I have presented key parts of Porter’s ideas on strategy for a couple of hours and then Henry presents his ideas as a contrast to Michael’s. We started doing this tag team effort about 11 years ag.

Assume you are the new CEO of the Delta Phi Corporation. When the Bo.pdf

eyeonsecuritysystems

A manager typically spends the least amount of time: Communicating Monitoring work outcomes Establishing plans and goals In quiet reflection alone in his or her office Which of the following terms best describe a manager\'s work? Check all that apply Varied (Work changes frequently) Continuous (Managers usually finish one piece of work before moving on to the next) Reflective (Managers spend a large amount of time thinking about things) Brief (Work occurs in small segments) Use the manager roles developed by Mintzberg to answer the following questions. Mintzberg placed managerial work roles into which of the following categories? Check all that apply. Interorganizational Informational Interpersonal Decisional g the role ofY Solution The correct answer is \"In quiet reflection alone in his or her office\". The success or failure of the manager-led team depends completely on the leader. A competent team leader can help develop and improve even the high performance team. A manager should be clear and straightforward, should have good communication skills, good organizing skill, leadership skill, can handle complex situations, deal with changes appropriately, should have good knowledge, etc. Leader should focus on balancing both work and people to improve performance. Employees satisfaction is an important aspect for better performance. Leader should focus on making the employee satisfied by creating a positive work environment. Rather than blaming, leader should guide the employees how to cope up with difficult situations..

A manager typically spends the least amount of time Communicating Mo.pdf

eyeonsecuritysystems

Write message.cpp and priorityq.cpp. The code in message.cpp and priorityq.cpp doesn\'t need any input or output statements. Do not modify priorityq.h, message.h, or main.cpp. main.cpp _____________________________________________________________________________ __ #include iostream #include fstream #include new #include cstddef #include \"priorityq.h\" using namespace std; int main(int argc, char* argv[]) { ifstream inputs; // Input file for commands char op; // Hold operation int n; // Integer input from file PriorityQ* ptr = NULL; // Will point to priority queue object Message msg; // Assembled message Priorities p; // Message priority char c; // Message priority input from file string s; // Message string from file // Output usage message if one input file name is not provided if (argc != 2) { cout << \"Usage:\ project03 \ \"; return 1; } // Attempt to open input file -- terminate if file does not open inputs.open(argv[1]); if (!inputs) { cout << \"Error - unable to open input file\" << endl; return 1; } // Process commands from input file getline(inputs, s); // Input comment line cout << s << endl; // Echo comment line inputs >> op; // Attempt to input first command while (inputs) { switch (op) // Identify and perform operation input from file { case \'#\': // Echo Comment getline(inputs, s); cout << \"--------\ \" << op << s << endl; break; case \'c\': // Constructor cout << endl << \"Constructor()\"; try { ptr = new PriorityQ; cout << endl; } catch ( std::bad_alloc ) { cout << \"Failed : Terminating now...\" << endl; return 1; } break; case \'+\': // Enqueue inputs >> c; // Input message priority from file inputs.ignore(100, \' \'); // Skip one space getline(inputs,s); // Input rest of line as the message cout << \"Enqueue(\" << c << \" \'\" << s << \"\'\" << \")\"; try { switch (c) { case \'H\': msg.SetPriority(HIGH); break; case \'M\': msg.SetPriority(MEDIUM); break; case \'L\': msg.SetPriority(LOW); break; } msg.SetMessage(s); ptr->Enqueue(msg); } catch (FullPQ) { cout << \" -- Failed Full PriorityQ\"; } cout << endl; break; case \'-\': // Dequeue cout << \"Dequeue() -- \"; try { ptr->Dequeue(); cout << \"Successful\"; } catch (EmptyPQ) { cout << \"Failed Empty PriorityQ\"; } cout << endl; break; case \'x\': // Purge inputs >> c; // Input message priority from file cout << \"Purge(\" << c << \")\"; try { switch (c) { case \'H\': ptr->Purge(HIGH); break; case \'M\': ptr->Purge(MEDIUM); break; case \'L\': ptr->Purge(LOW); break; } } catch (EmptyPQ) { cout << \" -- Failed Empty PriorityQ\"; } cout << endl; break; case \'?\': // Peek inputs >> n; cout << \"Peek(\" << n << \") -- \"; try { ptr->Peek(n).Print(); } catch (InvalidPeekPQ) { cout << \"Failed Invalid Peek PriorityQ\"; } cout << endl; break; case \'f\': // Front cout << \"Front() -- \"; try { ptr->Front().Print(); } catch (EmptyPQ) { cout << \"Failed Empty PriorityQ\"; } cout << endl; break; case \'r\': // Rear cout << \"Rear() -- \"; try { ptr->Rear().Print(); } catch (EmptyPQ.

Write message.cpp and priorityq.cpp. The code in message.cpp and pri.pdf

eyeonsecuritysystems

Will a Pigovian tax always be equal to the marginal external cost of pollution at the socially optimal output level? Solution No as proved by Coase theorem there are transanction costs involved. They include monetary values for specifying, defining and enforcing property rights. There are high transanction costs particularly when parties involved are large. It may leave thus society saddled with excessive waste_waste over and above socially optimum level.

Will a Pigovian tax always be equal to the marginal external cost of.pdf

eyeonsecuritysystems

Would you identify UTC’s approach to supply chain managemet as centeralized, decentralized or hybrid? Explain Would you identify UTC’s approach to supply chain managemet as centeralized, decentralized or hybrid? Explain Solution In business, a hybrid supply chain management can be defined as the combination of best elements of individuals, technology, and processes in order to develop a streamlined and end to end process. In case of United Technologies, the supply chain organization aims are supporting the entire value chain which includes strategy development, commodity management, contracting, supplier development, purchasing, materials management/logistics, delivery assurance and compliance. Thus it is quite evident that the company is trying to have a more sophisticated association of process, technology, and people so that better supply chain services can be offered. This kind of model undoubtedly represents the Hybrid supply chain management..

Would you identify UTC’s approach to supply chain managemet as ce.pdf

eyeonsecuritysystems

White collar crimes are best defined as a wide variety of nonviolent.pdf

eyeonsecuritysystems

Why do we diverge from the Rational Choice Paradigm when identifying problems and opportunities? Solution We diverge from the Rational choice Paradigm while identifying the problem and opportunity because it seems so logical, but is impossible to apply in reality. The reason behind it is that the model assumes that ‘people are efficient and are logical information processing machines’. But in reality, people have difficulty in recognizing problems and they cannot process the volume of information needed to identify the best solution to the problems; and even they face difficulty recognizing when and where their choices have failed. The second reason why the rational model doesn’t fit in reality is that it only focuses on logical thinking and ignores the fact that the emotions also influence, in fact even dominate the decision-making process.

Why do we diverge from the Rational Choice Paradigm when identifying.pdf

eyeonsecuritysystems

Why is lactose much more soluble in water than in ethanol? Solution Ethanol is an alcohol while lactose is a carbohydrate.Carbohydrates are soluble in water, they can have several hydroxyl groups which provides the molecule with water solubility. Ethanol on the other hand has only one hydroxyl group and the rest of the valences are occupied by hydrogen, this makes ethanol less soluble in water than lactose..

Why is lactose much more soluble in water than in ethanolSolu.pdf

eyeonsecuritysystems

Which of the following is a technology that takes an Internet signal and converts it into radio waves? A) mobile B) wi-fi C) digitization D) VoIP Which of the following is a technology that takes an Internet signal and converts it into radio waves? A) mobile B) wi-fi C) digitization D) VoIP A) mobile B) wi-fi C) digitization D) VoIP Solution The correct answer is Option B Wifi is a technology that takes an Internet signal and converts it into radio waves?.

Which of the following is a technology that takes an Internet sig.pdf

eyeonsecuritysystems

What aspect of Ethernet can be a problem for security? What mechanism(s) were added to fix the problem? Solution Please follow the data and description : Ethernet : In the stream of computer science and technologies an ethernet is a local area networking technology which used to transfer the data from one place to another in the form of analog and digital signals respectively based on the usage, and these cables are specially called as the coaxial cables. These are also used for th epurpose to carry the signals of radio of different frequencies. Ethernet and its Security Issues : Ethernet on the other hand has also some major security problems which did effect its networking badly. Some major problems are as follows : 1) The major security problem of Ethernet is that when the data is transferred from the source to the respective destination it generally moves almost from all the parts and divisions of the cable and then moves towards the receiving computer. So while this part of execution some sniffing programs that are used by the hackers might be dumped in that causes some serious problems. 2) As the technologies use the concept of peer to peer technology that has been adopted mainly to reduce the expense on the use of the coaxial cables in Ethernet but at the same time it provides an unsecured networking process because it is based on sharing the data. So when this is done in a workgroup the the different or the unrelated computer have the greater possibilities to see the data. So some of the.

What aspect of Ethernet can be a problem for security What mechanis.pdf

eyeonsecuritysystems

This project has been designed for you to get experience with basic computer graphics concepts and write a first computer graphics application in C++ 4.1. Overview § You should design a simple 2D scene with an object which you can move, e.g. a car, a robot, a person, a spaceship, a sword, etc. Use at least 50 points (vertex). 4.2 Required Functionality Here are the elements that your program must have. Despite this \"list\" of requirements, there is a lot of room for creativity! 40 points. Drawing and Double Buffering: You created a program that uses OpenGL and GLUT. The program compiles and runs. A window appears on the screen. You use double buffering. Something moves on the screen. The animation is flicker free. 40 points. Movement control: Implement keyboard control for the selected object (e.g. a car). The car is positioned in the Start Area. Use the following special keys: cursor down, cursor up, cursor left, cursor right. To make it harder you can forbid the user to break to speed 0, but always go forward a minimum speed. 10 points. Design / Make a Game / Effort: We will judge the general “design” aspect of the program. This includes various aspects. E.g. programs with additional features, visual design, ... will get some more points and programs with undesirable design choices will get less. Solution #include #include #include #include int main() { clrscr(); int driver = DETECT,mode; char *path = \"D:\\\\pgms\"; // place your tc file path initgraph(&driver,&mode,\"\"); putpixel(200,300,WHITE); line(0,400,639,400); //Road for(int i=0;i<500;i++) { line(50+i,370,90+i,370); arc(110+i,370,0,180+i,20); line(130+i,370,220+i,370); arc(240+i,370,0,180+i,20); line(260+i,370,300+i,370); line(300+i,370,300+i,350); line(300+i,350,240+i,330); line(240+i,330,200+i,300); line(200+i,300,110+i,300); line(110+i,300,80+i,300); line(80+i,300,60+i,340); line(50+i,340,50+i,370); line(165+i,305,165+i,330); line(165+i,330,230+i,330); line(230+i,330,195+i,305); line(195+i,305,165+i,305); line(160+i,305,160+i,330); line(160+i,330,95+i,330); line(100+i,330,120+i,305); line(120+i,305,160+i,305); circle(110+i,370,17); circle(220+i,370,17); delay(10); } getch(); closegraph(); return 0; }.

This project has been designed for you to get experience with basic .pdf

eyeonsecuritysystems

More from eyeonsecuritysystems (20)