PC Hard Drive Guide - Install, Manage, Troubleshoot
•Download as PPT, PDF•
0 likes•430 views
![Objectives ,[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
More Related Content
What's hot
What's hot (20)
Viewers also liked
Similar to PC Hard Drive Guide - Install, Manage, Troubleshoot
Similar to PC Hard Drive Guide - Install, Manage, Troubleshoot (20)
More from ALBAKRI MOHAMMAD
More from ALBAKRI MOHAMMAD (20)
Recently uploaded
Recently uploaded (20)
PC Hard Drive Guide - Install, Manage, Troubleshoot
- 1. A+ Guide to Managing and Maintaining your PC, 6e Chapter 8 Hard Drives
- 6. Figure 8-4 3 1 -inch, high-density floppy disk showing tracks and sectors
- 7. Figure 8-5 Inside a floppy disk drive
- 9. Figure 8-6 Clusters, or file allocation units, are managed by the OS in the file allocation table, but BIOS manages these clusters as one or two physical sectors on the disk
- 11. Figure 8-8 Connect colored edge of cable to pin 1
- 13. Figure 8-10 Inside a hard drive case
- 14. Figure 8-11 A hard drive with two platters
- 16. Figure 8-13 Floppy drives and older hard drives use a constant number of sectors per track
- 17. Figure 8-14 Zone bit recording can have more sectors per track as the tracks get larger
- 23. Table 8-1 Summary of ATA interface standards for storage devices
- 25. Figure 8-16 A PC’s hard drive subsystem using parallel ATA
- 26. Figure 8-18 A hard drive subsystem using the new serial ATA data cable
- 28. Figure 8-21 The 137-GB barrier existed because of the size of the numbers used to address a sector
- 30. Figure 8-22 A motherboard has two IDE channels; each can support a master and slave drive using a single EIDE cable
- 31. Figure 8-25 Rear of a serial ATA drive and a parallel ATA drive
- 33. Figure 8-28 Using a SCSI bus, a SCSI host adapter can support internal and external SCSI devices
- 36. Figure 8-31 This CrossFire hard drive holds 160GB and uses a 1394a or USB 2.0 connection
- 40. Figure 8-32 Plan for the location of drives within bays
- 42. Figure 8-33 A parallel ATA drive most likely will have diagrams of jumper settings for master and slave options printed on the drive housing
- 43. Figure 8-41 Connect a power cord to each drive
- 45. Figure 8-45 Standard CMOS setup
- 47. Figure 8-48 This motherboard has four serial ATA connectors
- 48. Figure 8-49 American Megatrends, Inc. CMOS setup screen shows installed drives
- 50. Figure 8-52 Hard drive installed in a wide bay using a universal bay kit adapter
- 58. Table 8-4 Floppy drive and floppy disk errors that can occur during and after the boot
- 59. Table 8-4 Floppy drive and floppy disk errors that can occur during and after the boot (continued)