Depakote Essay

Depakote Essay
Can Depakote, An Antipsychotic Drug with a Bad Rap Change a Teenager's Life?
Help! The emergency 911 call goes "My child is having one of his psychotic episodes and I don't
know what to do!" A mother's plea for help as she watches her teenage son's manic episodes unfold;
what is a mother to do? Since then, the teenager has been prescribed several antipsychotic drugs
such as Aripiprazole (Abilify), thereafter, Risperidone (Risperdal) and a sleuth of others, but none
curtails or controls his mood disorder until he is prescribed Depakote. Confused and perplexed,
Depakote is an anti–seizure and an anti–psychotic drug that works by increasing the amount of a
special neurotransmitter in the brain (drugwatch.com, nd).
Psychotic episodes stream ... Show more content on Helpwriting.net ...
Isolation
5. Poor coping strategies and problems adjusting to life stresses
Another name for Depakote which is typically known for is divalproex sodium and valproic acid.
These two medications are used to treat a variety of seizures and mood disorders, as well as a
preventative for migraines. The downside is that the side effect to this antipsychotic drug is linked to
suicide, liver toxicity, pancreatitis and a variety of birth defects, including cardiovascular
malformations, neural tube defects and facial deformities (drugwatch.com, nd).
Background
The U.S. Food and Drug Administration (FDA) approved Depakote in 1983 for epilepsy treatment,
in 1995 for bipolar disorder, and in 1996 for the prevention of migraine headaches. Sold by Abbott
Laboratories, the drug comes in a variety of forms: Depacon injections (valproate sodium),
Depakote, Depakote CP and Depakote ER (divalproex sodium) and Depakene and Stavzor (valproic
acid). The liquid form, Depacon, is less popular as it tends to make users nauseous (drugwatch.com,
nd).
Depakote has been approved for use in adults and children 10 and older for seizure treatment and
age 16 and older for migraine prevention. However, it is not approved to treat bipolar conditions in
children, despite that it has been known to be used in this off–label manner. In 2008, the FDA
approved the first generic version of Depakote. In recent years, Abbott Laboratories has faced
federal charges of illegal marketing of Depakote to
... Get more on HelpWriting.net ...

Chemical Coagulation vs Electrocoagulation for Groundwater...
Arsenic contamination in groundwater has become a major health problem for human being. There
are many treatment methods have been developed for arsenic removal. It is important to develop a
treatment method that is economical and accessible for people who live in rural areas and cannot
afford the expensive treatment methods. Due to its several advantages, such as low cost and
maintenance, electrocoagulation is one of the promising methods that can be used for arsenic
treatment. In this study, we compare chemical coagulation with electrocoagulation and try to show
the advantages of electrocoagulation over chemical coagulation. Three experimental studies have
been reviewed and based on the results of these studies it has been concluded that by determining
optimum parameters such as electrolysis time, initial arsenic concentration, current density,
electrode surface area, and pH value, electrocoagulation can be an effective treatment method for
arsenic removal from groundwater due to its low cost, eco–friendly and low maintenance.
Keywords: arsenic removal, groundwater, electrocoagulation, chemical coagulation
Arsenic Removal from Groundwater by Electrocoagulation
Water is the most essential necessity for human life. Can you imagine life without clean drinking
water supply? Due to increasing the population of the world, the clean water has become a huge
concern. Arsenic has been one of the important components in contamination of drinking water in
many regions

Side Effects Of Opioids
Side effects of ergotamine includes nausea, tingling sensations, cramps, chest or abdominal pain,
and dizziness. Three potential, and possibly fatal, problems include toxicity, extreme blood vessel
constriction, and fibrosis. Doctors may advise taking painkillers that contain opioids if the attack is
very severe. Examples of opioids include morphine, codeine, meperidine, and oxycodone.
Butorphanol is an opioid that is available as a nasal spray. Classic side effects of opioids include
drowsiness, nausea, judgement impairment, and constipation. Drug abuse and addiction are a big
complication of using opioids as a treatment option. Metoclopramide is used in combination with
other drugs to treat the nausea and vomiting that may occur from medications ... Show more content
on Helpwriting.net ...
Migraine headaches are the third most prevalent illness in the world, and ranked as the sixth most
disabling illness. Statistics show that only about fifty percent of people who suffer from chronic
headaches know that they're suffering from a migraine. 76% of people who suffer from migraines
worry that they will suffer for the rest of their lives, and 37% of sufferers worried about their
migraines between attacks. Studies found that approximately 12% of Americans suffer from
migraines, and 40% of Americans could benefit from preventative therapies. Even though studies
show that at least 40% of sufferers could benefit from preventative therapies, only one in five
sufferers are currently using preventative therapies. Studies also show that over 25% of people who
suffer from migraine attacks miss at least one working day over the past three months, and nine out
of ten sufferers say that they cannot "function normally" during those days. At least 98 percent of
migraine attack sufferers take medications for temporary headache relief, whether it be over the
counter or prescription. Only 12% of sufferers take preventative medications as opposed to the 98%
of sufferers taking medications for relief. Severe migraines are ranked in the highest of seven
disability classes, along with psychosis, dementia, and quadriplegia, published by the World Health
Organization. People who participated in a survey who admitted to a

Essay about Acid/ Base properties of an antimicrobial agent
Chem 253
Lab 1: Acid/Base Properties of an Antimicrobial Agent
09/03/13
Purpose The purpose was to determine the acid and base properties of the antimicrobial agent
sodium benzoate. Theory Sodium has mainly been used in food processing to avoid growth of
bacteria and harmful microorganisms. It is commonly used to preserve foods and beverages that
have an acidic pH. Rather than benzoic acid, sodium benzoate is used because it is generally soluble
in most aqueous solutions but benzoic acid is not.
Reaction Sodium benzoate mixed with water, dissociates into benzoate and sodium ions.
Hydrogen chloride, which is a gas, will exist in ionized form when combined with water to form
hydrochloric acid.
Then when ... Show more content on Helpwriting.net ...
Moisten the filter paper in the funnel with a little distilled water, and make sure that the moist filter
paper fits snugly in the bottom of the Buchner funnel with no folds or bends in the filter paper
visible. Use the thick rubber tubing from your drawer to provide vacuum from the "aspirator" to
your "filter flask." Be sure you are connecting the tubing to the "aspirator," not to the water or gas
outlet. Turn on the water to a low volume to create a vacuum in the filter flask but not so much that
you flood the sink.
6) Transfer the crystals (quantitatively) from Step 4 to the funnel. Use about 5 mL of distilled water
to rinse any solid that remains in the beaker onto the filter paper. Let the solid air–dry with the
aspirator running for a few minutes.
7) Place the filter paper with solid in the oven for about 15 minutes to dry. Weigh and then dry again
for 5 minutes. Weigh again. If your second weight differs from the first weight by more than 0.5%,
dry again for 10 minutes. Continue this process until successive weighing's are within 0.5%.
For this lab, we must be sure to always wear our safety glasses whenever we are in the laboratory
and wear gloves when we are conducting an experiment. Benzoic acid and sodium benzoate used in
this experiment can be mild irritants to the skin. We must be careful not to get them on our skin or

Meat Tenderness, And Consumer Perceptions
Meat Tenderness, and Consumer Perceptions
Introduction The current climate of the relationship between the food–producing industry and
consumers is volatile. Current self–appointed consumer leaders such as Vani Hari, known as the
"Food Babe" (foodbabe.com) pressure food industry sectors for changes in products. Reasoning for
these changes largely reside in the practices of fear–mongering, using terminology outside the
knowledge of the readers these leaders attract, exacerbating worst–case scenarios without full
disclosure of required toxic– or lethal–doses. Common consumer concerns have migrated into the
meat products industry. Consumers often demand livestock animals used for meat production to be
raised similarly to their ... Show more content on Helpwriting.net ...
Post–exsanguination, the cellular processes continue to be active until an environmental or
substrate–level limitation ceases operation. Koohmaraie et al. (1987) suggested that all animals prior
to slaughter are equally tender. Differences in tenderness level therefore, are a result of the process
of harvest, and the conversion of muscle to meat products. The first 24 hours following slaughter
includes many events that are decisive in the resulting tenderness of meat products. During this
time, energetic biological processes result in decreasing pH within the meat. Muscle rigor delay
phase and onset phase occur, as well as heat dissipation and resultant carcass cooling. Each of these
various factors greatly impact meat quality. pH Changes. The pH of living muscle is 7.0; literature
suggests that final post–slaughter pH ranges from 5.3 – 5.8 (Smulders et al., 1992; Yu et al., 2008).
The decline of muscle pH during the conversion of muscle to meat carries importance to both meat
quality as well as a bacterial growth inhibitor. Ultimate pH in beef carcasses may be reached from
24 – 40 hours post–mortem (Savell et al., 2005). The decline of pH is a direct result of adenosine
triphosphate (ATP) production maintained in muscle through the anaerobic energy production
system: glycolysis. As blood–loss is completed via exsanguination, the ability to maintain oxygen as
the terminal electron acceptor for aerobic ATP production fails

Pollution Analysis of River Running through a Community
Contents:
1. –Environmental issue
–Hypothesis
–Aim
–Apparatus
–Method
2. –Variables: Controlled
Independent
Dependent
–Results: Table
Bar Graph
3. –Conclusion
–Evaluation
4. –Article with proposed solutions
5. –Continuation of Article
6. –Bibliography
This document includes a cover page and attached Plagiarism report.
Human activities generate many different forms of pollution that are harmful to our environment, for
example; water pollution. Pollutants change the pH balance of the water sources they infest, which
in large cases is dangerous to the plants and animals that both live in that water source and rely on it
for survival. Industrial activities such as mining and manufacturing produce waste that make the pH
balance of water acidic, while in suburban areas the waste produced and the activities that affect the
water sources generally make the water more alkaline.
This investigation will determine whether a river running through the local suburban area is being
polluted by the community, its occupants, and their regular lifestyles or not.
Hypothesis: The water in the river running through a suburban area is more polluted with alkaline
substances than acidic substances.
Aim: to investigate whether the water in the river running through a suburban area is more polluted
with alkaline substances than acidic substances.
Apparatus:
 Six containers for different water samples
 Two droppers
 Chlorine neutraliser –found in a fresh water test kit
 Solution 4 (pH test

Enzyme Catalase Experiment
Introduction:
Within a cell, enzymes are used as a catalyst to increase the rate of chemical reaction. They do not
consume themselves, rather they help in increasing the rate of reaction. Within the body, enzymes
vary depending on their specific functions. For instance, hydrogen peroxide is a toxic chemical, but
it breaks down into harmless oxygen and water. This reaction can be sped up using the enzyme
catalyst produced by yeast. Hydrogen peroxide is produced as a byproduct in cellular reaction,
because it is poisonous and must be broken down, therefore this reaction is important. The speeding
up of the reaction is shown below:
2H2O (aq) catalyses 2H2O (l) + O2 (g)
This experiment is designed to analyze how the enzyme catalase activity is affected by the pH
levels. The experiment has also been designed to outline all of the directions and the ways by which
the observation can be made clearly and accurately. Yeast, will be used as the enzyme and hydrogen
peroxide will be used as a substrate. This experiment will be used to determine the effects of the
concentration of the hydrogen peroxide versus the rate of reaction of the enzyme catalase.
Hypothesis:
The presence of catalyst will cause hydrogen peroxide to break down into water and oxygen. The
increase in the pH of the substrate will cause the increase in the rate of reaction. It will optimize at
pH 7 and will diminish/moderate after pH 9.
The important questions that will help clarify the

Where Does Taurine Come From Essay
Where Does Taurine Come from?
If you are wondering what makes energy drinks work, you may find ingredients like taurine as an
important component of these beverages. Taurine is found in products like Red Bull and many
energy drinks. What is it and where does taurine come from? Taurine is an amino acid that contains
sulphur, a molecule that is not found in many proteins. This amino acid helps increase muscle
function, aids performance and sports endurance, and helps regulate blood sugar levels, reduce
anxiety, and improve cardiac health. Although taurine is found in bull semen or bile, commercial
products that contain taurine uses lab–synthesized taurine, which is safe and suitable for people who
want to avoid using animal products.
Part 1: ... Show more content on Helpwriting.net ...
It also helps in the development of mental function in children. Research shows that taurine, when
paired with caffeine, improves reaction time and reduces sleepiness in sleep–deprived people.
Part 3: Is Taurine in Energy Drinks Safe?
Now that you know the answer to where does taurine come from, you probably also want to know if
it is safe to use. In small doses (up to 3,000 mg per day) supplemental taurine is considered safe. It
is therefore important to observe moderation in taking energy drinks containing taurine. For
example, Red Bull contains approximately 1000 mg of taurine per 8 oz can. So if you consume
more than 3 cans of this product per day and also eat meats and dairy products containing taurine,
you are likely to exceed the daily recommended amount.
 Possible Side Effects of Taurine in Energy Drinks
Heavy or long–term use of taurine may have side effects. One study found that it can lower heart
rate. Mixing alcoholic drinks and taurine could lead to dehydration and abnormal heart rates, since
they are both diuretics. Other side effects include increased stomach acid and diarrhea. People with
bipolar disorder should avoid taking too much taurine since it may exacerbate their

Essay about Module 1 Homework
Module 01 Homework Assignment Use the information presented in this module along with
additional outside research to answer the questions: 1. Describe how applied microbiology is used to
improve aspects of life and the environment. Microbiology is the study of microorganisms
(VanMeter, VanMeter, & Hubert, n.d., p.3). These are all of the things not visible to the human eye.
With the study of microbiology, it enables us to find things such as viruses and bacteria. This is
helpful because sickness and certain outbreaks can be prevented. In turn, this creates a safer more
stable environment. 2. Describe how the table of elements is ordered and discuss four common
elements in living organisms. Elements are ordered on the ... Show more content on Helpwriting.net
...
OSHA created a biosafety program. This provides rules and guidelines for handling and storing
chemicals in the laboratory. The program contains everything you need to be safe in the lab. It also
lays out an exposure plan in case someone were to get something in the lab. (VanMeter, VanMeter,
& Hubert, n.d., p.101). 6. Discuss the technique and importance of proper hand washing and
describe at least two other types of hand cleaning/sanitizing techniques. Hands should be washed
with soap and warm running water. The should also be washed for 20 seconds paying special
attention to the back of the hand, the wrist, between the fingers and under the nail. Rinse well and
dry with a single use towel. Always turn the water off with the towel. Aint–bacterial hand sanitizer is
also effective. Alcohol can also be used. (VanMeter, VanMeter, & Hubert, n.d., p.100–101). 7. Name
five pieces of information provided by the NIOSH Pocket guide to Chemical Hazards found at
www.cdc.gov. 1.Water flush immed | If this chemical contacts the skin, immediately flush the
contaminated skin with water. If this chemical penetrates the clothing, immediately remove the
clothing and flush the skin with water. Get medical attention promptly. | 2.Water flush prompt | If
this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical
penetrates the clothing, immediately remove the clothing and flush the skin with water

Determining The Ph Of Household Items
Determining the pH of Household Items
March 22, 2016: Sara, Sam
Introduction: Everyday household items can be seen as just "household items". However, it is often
not realized that we could actually determine the pH very easily. It could also be important to know
the pH in everyday life. For example, it is important to keep track of human pH levels. Some people
are curious to see the pH of their own body, which is a great use to keep acidic levels leveled.
Another use in real life is determining the pH of pools. Whether it's your own or a public pool, pH
indicators come in hand to make sure the pool is sanitary and safe. pH indicators are indicators that
contain halochromic synthetic compound which is added to a solution so that it can be ... Show more
content on Helpwriting.net ...
An example would be pure water. Most of the time the pH is determined by pH paper but there are
also other ways to determine the pH. For example, in this lab, cabbage juice was used. Cabbage
juice is a great pH indicator because it can be homemade and easy to access.
Purpose/Hypothesis: The purpose of this experiment is to use both cabbage juice and pH paper to
determine the pH of household items. This way, we can tell which products are basic and which one
are acidic. If we use cabbage juice as an universal pH indicator by comparing it to pH paper then pH
determined by the cabbage juice will be unstable because by using cabbage juice, it can be different
depending on how diluted it is.
List of Materials needed:
1 drop bottle of cabbage juice
Beakers (depending on how many items)
pH paper
Spot plate(s)
Household products (Dish detergent, coffee, laundry detergent, milk, tap water, etc)
Procedure:
1. In order to find the pH of each household item by using pH paper, the pH paper was placed on the
drop plate. Using the dropper, start by having the household item dropped onto the pH paper.
Immediately observe in order to spot any colour changes on the pH paper. To determine the pH by
using the pH scale and record the pH on your table of observations. Depending on what the pH is, it
could be very acidic, basic or neutral. Repeat these steps for the other products.
2. The second step in this lab is to use

Hardness And What Impact Does It Have On Water Quality
1. What is hardness and what impact does it have on water quality?
Hardness is the amount of dissolved calcium and magnesium in the water. Hardness impacts on
water quality throughout the aesthetic acceptability by consumers (meaning the concentration of the
calcium and magnesium and other dissolved solids are measureable by the consumers). In addition
to, economic and operational considerations (which is controllable throughout the treatment or
blending in public drinking water), hard water tends to leave scale deposition in the water
distribution system, as well as in heated water applications. (Hardness in Drinking–water, 2011).
2. What water quality standards are associated with water hardness?
There is no Primary or Secondary standard for water hardness by EPA. Also hardness has no health
risk. As the hardness of water is classified: 0 to 60 mg/ as calcium carbonate is classified as soft; 61
to 120 mg/L as moderately hard; 121 to 180 mg/L as hard; and more than 180 mg/L as very hard.
(Water–quality criteria. (n.d.).
3. Briefly describe your understanding about pH and why is pH important in water treatment. Give
two examples. pH is a measure of the hydrogen ion activity in the water and is determined by the
relative number of the hydrogen ions for acidity and hydroxide ion for alkalinity, thus
mathematically expressed as pH=–log [H+] where [H+] is the hydrogen ion activity . pH values are
calculated in powers of 10.Thus, the hydrogen ion concentration of a solution

Conventional Drug Delivery Systems ( Ddss )
Abstract:
With the emergence of more novel and effective drug therapies, increased importance is being
placed upon the methods by which these drugs are being delivered to the body. Different
methodologies have been heavily investigated as possible solutions , one of these methods are
intelligent or 'Smart polymeric drug–delivery systems'. "Stimuli responsive" and "self regulating"
drug delivery systems have captured the imagination of researchers, in large part because they
suggest a means to mimic the physiological homeostatic feedback mechanisms that are essential for
health. As dysregulation of homeostasis is a feature of many diseases such as diabetes and cancer.
1. Introduction:
Conventional drug delivery systems (DDSs) are often accompanied by systemic side effects that
mainly are attributed to their nonspecific bio–distribution and uncontrollable drug release
characteristics. To overcome these limitations, advanced controlled DDSs have been developed to
achieve the release of payloads at the target sites in a spatial controlled manner.
Commercially available controlled release devices offer several advantages, e.g. they maintain the
drug within the desired therapeutic range with just a single dose, they allow localized drug delivery
which ultimately may reduce the need for follow–up care, they preserve drugs that are rapidly
destroyed by the body and ultimately improve patient compliance.
With the breakthrough of the biotechnology field in medicine, many advantages of

The Depth Of The River Affect Its Overall Ph From Mid July...
Question: Does the depth of the river affect its overall pH from mid december 2015– to early
january 2016?
Knowledge Probe: According to.epa.gov/acidrain/measure/pH.html, pH is a measure of the
hydrogen ion concentration of a solution. Solutions with a high concentration of hydrogen ions have
a low pH and solutions with a low concentrations of H+ ions have a high pH. A pH of 7 is the most
neutral you can get and 0 being the most acidic and 14 being the most basic. each level is 10 times
more basic/ acidic than the previous level, for example a pH of 8 is 10 times more basic than 7, and
a pH of 9 is 100 times more basic than 7. when an acidic substance reacts with a basic substance
they counter each other like mixing hot and cold water. ... Show more content on Helpwriting.net ...
The blue bar grapH below it shows the pH of each of the 12 trial collected. The table below
compares the depth in inches to the pH directly, and the average of each is at the bottom of the table.
Data Analysis: On trial 5 something interesting happened where it did not match the trend of other
data points. you can see this when comparing the depth to pH with the grapHs; for example trial 1's
depth and pH is lower than trial 2's depth and pH, and trial 2's depth and pH is lower than trial 3's
depth and pH etc. that sort of trend is fluent through the data except trial 5 where depth was lower
than the previous trials but the pH was the highest collected. My data is accurate to a point but when
collecting the depth of the river it presented a challenge to get 100% accurate because it is
constantly changing; also the pH scale only measures to the hundredth of a digit. The pH Scales
calibration could also have been of slightly but all of my trials were collected under the same
calibration so it does not seem to present a change in trend but instead with the actual numbers.
Claim: When the depth on the Looking Glass river was higher it had a higher pH in late december
2015 to early January 2016.
Data Supporting Claim: When analysing my data you can clearly see that when the

Why Are My Fish Dying? Lab
Why Are My Fish Dying? Lab Jillian Jeffries Cadiz Marine Eco Period 4 November 19'th, 2014
Purpose: The purpose of this lab is to identify the element that is causing the fish in the Halibut tank
to die, by testing each variable between both of the identical tanks. Background Information: To
truly understand the cause of this awful fish mortality crisis in the HAGS Company, it is essential
that we gather all the information we can about the normal living conditions of both the Halibut and
Grunion fish. Halibut or Hippoglossus, is a flatfish from the family of the right–eye flounder fish,
the largest of all the flatfish, and can grow to more than 8 ft long and 700 lbs. They usually reside in
the North Pacific and the North Atlantic oceans, and are a readily enjoyed food all around the world.
Physically, they are dark brown on the top side with a cream underbelly and have very small scales
embedded within their skin.This color scheme is a form of countershading and disguises Halibut
from above and from below by blending into the light above and the ocean floor below
simultaneously. Halibut live at depths from nearly 10–100 meters, yet spend most of their time near
the bottom, they can often move up the water column to feed.Younger Halibut, up to 10 years of
age, are highly migratory, and generally migrate in a clockwise direction. Relatively inactive yet
strong swimmers, able to eat a large variety of fish such as cod, crab, and shrimp. Adult Atlantic

The Chemistry Of A Heating Bath
A heating bath is used in the laboratory to allow the chemical reaction to occur at an elevated
temperature around 1000C. The beaker is a glass vessel which contains the chemical solutions for
the purpose of coating. It is placed in the electroless bath where the chemicals are being heated up.
The glass rod is used to stir the chemical where the magnetic stirrer is not necessary. The tongs are
used to lift the bath after the coating is completed. Tri–sodium citrate and thallium acetate are the
chemicals used during coating process which acts as a stabilizer for the bath. It stabilizes the
reaction occurring in the bath. Laboratory grade distilled water is used for the cleaning process and
also to mix up with the chemicals. Nickel chloride acts as the source for the coating process as the
nickel is being coated upon the surface of the substrate. Ethylene di amine is used as a complexing
agent which creates a bond between the nickel and aluminium and causes the coating. Thallium
acetate is used as the stabilizer. Sodium borohydride is the reducing agent which removes the
hydrogen ions which are being formed up inside the bath during the coating process. Fig.1 Zincate
pre–treatment process Table.1 Composition of Zincate Sodium hydroxide 400 g/l Zinc sulphate 120
g/l Sodium potassium tartarate 6 g/l Temperature Room Temperature Immersion time 3 mins Table.2
Nickel phosphorous and Nickel boron composition and conditions S.No Chemicals Used &
Conditions

The Dangerous Everyday
There are things all around us that can be very dangerous and we might never know. Soaps and
detergents are one of those things. Acids and bases are everywhere but, there are two specific types:
Sulphuric Acid and Sodium Hydroxide which we use on a regular day bases. An acid classifies a
wide range of materials including Sulphuric acid and bases Sodium Hydroxide. When
manufacturing soaps they use Sodium Hydroxide, and detergents use Sulphuric Acid. But these two
can be very poisonous, and there are many symptoms that may happen, some even severe. The title
shows how much people may be using dangerous things without having the knowledge that they can
harm them.
Acid and bases can be found in our everyday lives. An acid is a compound that usually has a sour
taste, containing hydrogen that can be replaced by a metal to form salt. Bases taste bitter and feel
slippery, their water solution conducts and electric currents. When acids and bases are put together
they make salt and water. The Arrhenius theory states that acids are substances which produce
hydrogen ions in a solution and bases are substances in which produce hydroxide ions in a solution.
Neutralization happens when hydrogen ions and hydroxide ions produce water. Something we use
every is soaps, detergents and fertilizers, all of these have acids and bases. The manufacturing of
soaps use the base Sodium hydroxide and the detergent and fertilizer use Sulphuric acid. Sodium
hydroxide is a white solid,

The Game Of Soccer : The Atp / Pc System
1. Soccer is one of the most demanding of all sports. The game is played on one of the largest fields
of any sport, for the longest sustained time and with the least amount of breaks. Players in a soccer
team are in continuous activity as they compete for loose balls, move to encourage teammates,
rotate positions and run to make a space or test opponents. Running, jumping, sprinting movements
in relation with sudden changes of acceleration and route outweigh the play. The power of the game
ranges between low–level activities such as walking or jogging to ones of high intensity such as
sprinting . This is what is known as intermittent exercise. The rhythm of soccer is dynamic and
constantly changing, which is a characteristic that divides it from other endurance sports , this
suggests that in order for a midfielder to successfully endure for the entire 90 minutes all three
energy systems assist in different stages although the ATP/PC system is dominant.
The ATP/PC system, which lasts up to 10 seconds, is the body's initial source of fuel and is reliant
on its stores of ATP and CP and provides the required burst of energy without the presence of
oxygen for high intensity purposes. This burst of energy is due to separating of the chemical bonds
between the Phosphate and Creatine which releases additional energy that helps produce more ATP
so that we have it upon requirement for only a short period of time. This system is the most
dominant system because this system is

Classifying chemical reaction
02/19/14 Classifying Chemical Reactions Introduction Pre–lab questions 1. Which reactants used in
this experiment are flammable? Discuss the safety precautions that are necessary when working
with flammable materials in the lab? 2. Summarize the following description of a chemical reaction
in the form of a balanced chemical equation? 3. Common observations of a chemical reaction are
described in the introduction section. For each observation, name a common or everyday occurrence
that must involve a chemical reaction? Research question What is the appearance of reactant,
Evidence of chemical reaction, and properties of a product? Background information The
experiment is to observe a variety of chemical reactions and to identify patterns in ... Show more
content on Helpwriting.net ...
2. When the magnesium ignited, removed it from the flame and held it over an evaporating dish or a
pyrex watch glass until the metal had burned completely. Let the product fall into the evaporating
dish. 3. Turned off the laboratory burner and observed the properties of the product in the
evaporating dish. 4. Recorded observation in the data table Reaction 2 – 1.Used a Beral– type pipet,
added about 2mL (40 Drops) of 1M hydrochloric acid solution to a small test tube. 2. Obtained a 2–
3 cm strip of magnesium metal ribbon and coiled it loosely into a small ball. Added the magnesium
metal to the acid in the test tube. 3. Carefully felt the sides of the test tube and observed the resulted
chemical reaction for about 30 seconds. 4. While the reaction was still occurred, lighted a wood
splint and quickly placed the burned splint in the mouth of the test tube. Do not put the burned splint
into the acid solution. 5. Recorded observations in the data table. Reaction 3– 1. Obtained a clean
and dry test tube and placed a small amount ( about the size of a jelly bean) of ammonium carbonate
into the test tube. 2. Used a test tube clamp to held the test tube and gently heated the tube in a
laboratory burner flame for about 30 seconds. 3. Removed the test tube from the flame and places a
piece of moistened litmus paper in the mouth of the test tube. Identified any odor that is readily
apparent by wafted the fumes toward your nose. Caution: Do not sniff

The Effect Of Temperature And Ph Levels On Enzyme Activity
Joshua Kwon
Sep 19, 15
Biology p 4
How Do Changes in Temperature and pH Levels Affect Enzyme Activity? Lab Report
In biology class, we've learned that sugars produce energy and to use sugars to gain energy, an
organism needs a proper enzyme should exist to break it down the chemical bonds of the sugar.
Enzymes and proteins are important in organisms because they are involved in most chemical
reactions that take place inside of an organism. Our example of an important enzyme was catalase,
which breaks down H2O2. H2O2 is a natural by–product and toxic. When H2O2 contacts catalase,
it breaks down into water and oxygen. Our group got curious about how changes in temperature and
pH levels affect enzyme activity. Since enzymes are group of protein and protein can break easily by
acid, base, and hot temperature. To experiment our question, we used catalase solution, 3% H2O2
solution, 0.1 M HCl solution, 0.1 M NaOH solution, a beaker, an O2 gas sensor, sensor interface on
a Chromebook, pH paper, and safety gloves. Therefore, we conducted experiments to test how
enzyme activity in different conditions. Plus, we predicted that if temperature increases or enzyme
have contacts with acid or base, enzyme activity will decrease. We held four controlled experiments
which are controller, temperature, HCl Acid, and NaOH Base. We controlled the amount of catalase
to 10 mL and H2O2 solution to 4 mL. First we mixed catalase with H2O2 solution and used O2
sensor to gather

Ima Statement of Ethical Practice. Essay
Running head: IMA Statement
Review of IMA Statement of Ethical Professional Practice:
Does Business Interaction in the Global Market Conflict with these Standards?
Paul D. Baker
Aspen University BUS 510
Abstract
Ethical standards are subjective. Like morals, mission statements and corporate responsibilities and
conduct, Ethical standards or practices are used to guide behavior in an organization or profession.
This paper will explore the Institute of Management Accountants (IMA) Statement of Ethical
Professional Practice and their ability to interact in the global market.
Review of IMA Statement of Ethical Professional Practice:
Does Business Interaction in the ... Show more content on Helpwriting.net ...
Russell Investment also gives back the communities they serve. With their Focused Giving Program,
they provide small business loans, job assistance for women, reinvest their knowledge by teaching
financial literacy to the people of all ages
(http://www.russell.com/us/about_russell/community/community_involvement.asp).
In contrast, Abbott Laboratories, a world–wide company with over 90,000 employees word–wide,
recently agreed to pay over $1.8 billion dollars in fine for deceptive marketing (site) and accounting
fraud related to their anti–seizure medication, Depakote. In addition, they have agreed to enter in to
a Corporate Integrity Agreement (CIA) with the Office of Inspector General (OIG) of the
Department of Health and Human Services (http://www.abbott.com/news–media/press–
releases/abbott–reaches–settlement–agreement–on–depakote.htm). During the period of
investigation (2001–2006), Abbott earned about $13 billion from the sales of Depakote.
With this admission, are the ethical standards within Abbott's management and accounting
practices? Obviously, by their admission, there wasn't. On Abbots own web site (wwwabbott.com),

they state they are committed to meeting high ethical standards and agree to follow all local,
national and international laws. Their compliance program states important elements such as
leadership, accountability,

Investigating The Relationship Between Ph And Water Hardness
The purpose of this investigation was to determine the relationship between pH and water hardness.
Water samples from above the Mount Morgan mine site and below the Mount Morgan mine site
were also compared.
8.1 Analysis of the Data
It was hypothesised that the water sample from above the mine site would be of better water quality
than the sample from below the mine site. It was found that this was, in fact, the case. As seen in
Table 7.2, the above sample had lower acidity, hardness and conductivity than the below sample.
Given that acidity is indicated by a pH of below 7, the below mine water sample was considered
acidic, at a pH of 4.92. Conversely, the above mine site sample had a pH of 7.35, indicating an
almost neutral profile.
The above mine sample had a conductivity of 2200 µS/cm, whereas the below mine sample had a
conductivity of 7500 µS/cm. This suggests that there are a significantly greater number of ions in
solution in below mine water than above mine water.
The below mine sample also had greater water hardness, with a calcium ion concentration of
5183.29 mg/L, compared with the above mine sample's hardness of only 115.02 mg/L.
The above mine water mostly exhibited water quality parameter values that aligned with the water
quality guidelines for fresh water. With an almost neutral pH of 7.35, meaning it is within the
recommended pH range of 6.8–9.5 and is also safe for consumption. The hardness (concentration of
calcium ions) of 115.02 mg/L also lies

Ph Levels Lab Report Essay
The relatively close pH levels of Tap Water, Spring Water,
Flavored Water, and Seltzer Water.
Introduction
This experiment was performed to investigate the following hypothesis: The following four different
types of drinking water (spring water, seltzer water, tap water, and flavored water) we test will
relatively have the same pH level.
Our group decided to test different types of drinking water to see if a pH level of tap water is
comparable to other types of water. Many people believe that city water has many chemicals,
causing us to form the expirement to see how close the different types of drinking water's pH levels
are.
Materials and Methods
For the first part of our exiperiment we used the Red Cabbage Indicator. Red ... Show more content
on Helpwriting.net ...
We then moved the electrode in one of the beakers of water we wanted to test. We measured the pH
level, recorded it, then placed it back into the clean water it was orignally in. We repeated these
steps for each of the different type of drinking water.
The control treatment in our expirement was thr red cabbage indicator. The dependent variable is the
pH of the water. The independent variable is the different types of drinking water ( tap water, spring
water, seltzer water, and flavored water). The standard variables in the expirement are the clean test
tubes, the clean pipettes, the Paraflim, the pH tester, and the pH levels pH 2, pH 4, pH 6, pH 7, pH
8, pH 10, and pH 12.
Results
Table 1 shows the standard of the standard of the expirement. It is used to compare the color of the
red cabbage expirement to form an educated guess on the pH level of the different types of water.
Table 2 shows the pH numbers we got from the red cabbage expirement and from the pH tester. This
informations enables to compare the red cabbage and the pH tester numbers in order to prove the red
cabbages accuaracy, and to prove our hypothesis that all of the pH numbers of the different types of
drinking water are relatively close.
Table 1: Red Cabbage Indicator standards pH LEVEL | COLOR | 2 | Red | 4 | Pink | 6 | Purple | 7 |
Dark Purple | 8 | Blue | 10 | Dark Green | 12 | Green |
Table 2: Table of red

The Emergency 911 Call Goes
Help! The emergency 911 call goes "My child is having one of his psychotic episodes and I don't
know what to do!" A mother's plea for help as she watches her teenage son's moody episodes unfold;
what is mother to do? Since then, the teenager has been prescribed several antipsychotic drugs such
as Aripiprazole (Abilify), thereafter, Risperidone (Risperdal) and a sleuth of others, but none curtails
or controls his mood disorder until he is prescribed Depakote. Confused and perplexed, Depakote is
an anti–seizure and an anti–psychotic drug that works by increasing the amount of a special
neurotransmitter in the brain (drugwatch.com, nd).
Psychotic episodes stream from the result of a mental or physical illness, substance use, trauma or ...
Show more content on Helpwriting.net ...
Unfortunately, the side effect to this antipsychotic drug is linked to suicide, liver toxicity,
pancreatitis and a variety of birth defects, including cardiovascular malformations, neural tube
defects and facial deformities (drugwatch.com, nd).
Background
The U.S. Food and Drug Administration (FDA) approved Depakote in 1983 for epilepsy treatment,
in 1995 for bipolar disorder, and in 1996 for the prevention of migraine headaches. Sold by Abbott
Laboratories, the drug comes in a variety of forms: Depacon injections (valproate sodium),
Depakote, Depakote CP and Depakote ER (divalproex sodium) and Depakene and Stavzor (valproic
acid). The liquid form, Depacon, is less popular as it tends to make users nauseous (drugwatch.com,
nd).
Depakote has been approved for use in adults and children 10 and older for seizure treatment and
age 16 and older for migraine prevention. It is not approved to treat bipolar conditions in children,
although it has been known to be used in this off–label manner. In 2008, the FDA approved the first
generic version of Depakote. In recent years, Abbott Laboratories has faced federal charges of
illegal marketing of Depakote to pediatric and geriatric patients. (drugwatch.com, nd).
The drug company paid $1.6 billion to settle the charges. In addition, the company is facing

Cardiovascular Regulation Of Plasma Volume
In order to study the kidney 's regulation of plasma volume, osmolality, and pH, the changes in urine
flow rate, specific density, and urine pH of adult human subjects were measured. Subjects were
assigned one of four beverage options: water, Gatorade, Coke, or nothing. Beverages of different
compositions were used to study what effects does fluid intake have on urine volume and
composition. Subjects fasted five hours prior to the experiment, in which the subjects were required
to void and test their own urine every thirty minutes for 120 minutes after ingesting the beverage
they were assigned. The urine volume, specific gravity, and urine pH were measured for each void.
The subjects were instructed to fast five hours prior to the experiment and were allowed to drink
only eight ounces of water if necessary (Manuguid et al., 2015). Avoiding food or drink rendered the
subjects in a similar physiological state at the start of the experiment. This is important because the
consumption of food or drink shortly before the experiment may affect the volume and composition
of the urine voided, which would have affected the results. If a subject had ingested a considerable
amount of fluid an hour before the experiment, their urine volume for their first void could have
been greater than expected. The amount of liquid the subjects ingested depended on their body
weight. As a result, the amounts of liquid ingested varied within the drinking groups. At T0, the
subjects were in a state of

Valproic Acid (VPA)
Introduction
Valproic acid (VPA) is commonly used for treatment of many in neurological and psychiatric
diseases. Despite its medical effectiveness, serious complications might occur as liver toxicity
(Lheureux and Hanston , 2009).
The liver is the prime organ affectedby VPA toxicity because it is metabolized mainly by the liver
cells. Metabolic degradation of VPA rarely exists in skin, kidney gastrointestinal tract and lung
tissues (Silva et al., 2008). VPA interacts with the cell membrane mainly of the liver cells through
conjugation of glucuronic acid and oxidation of mitochondrial enzymes. Its toxicity ranged from
moderate elevation in liver enzymes and sever liver toxicity up to liver failure (Reynolds et al.,
1996, Baran et al., 2004, Lheureux and Hantson, 2009).
The most common mechanism of hepatotoxicity is related to oxidative stress and mitochondrial
dysfunction. VPA induces oxidative stress via release of reactive oxygen species, fat peroxidation,
mitochondrial membrane breakdown (Jafarian et al., 2013). The liver is one of the principle organs
assaulted by reactive oxygen species (ROS), released by mitochondria, microsomes and ... Show
more content on Helpwriting.net ...
VPA depletes cellular carnitine through the formation of valproylcarnitine and impairment of
carnitine recycling in the mitochondria leading to inhibition of mitochondrial fatty acid oxidation
(Lheureux et al., 2005). VPA inhibits biosynthesis of carnitine via inhibition of alpha–ketoglutarate.
Carnitine supplementation increases beta–oxidation of VPA leading to reduction of cytoplasmic
omega–oxidation and formation of toxic metabolites concerned in liver toxicity (Lheureux and
Hantson, 2009). The beneficial effects of L carnitine appeared to be mediated via its strong
antioxidant properties, which include the up regulation of the level of glutathione (Calabrese et al.,
2006 and Thangasamy et al.,

Coacervates Experiment
The purpose of this lab was to investigate how the concentration of ammonia affects the formation
of coacervates. It was hypothesized that as the ammonia concentration increase, so will the number
of coacervates until it reaches the optimal state, then would start to decrease. For this experiment 4
mL of gum arabic solution (carbohydrate) was mixed with a gelatin solution (protein) and was
placed under a microscope to observe the number of coacervates. According to Oparin, combining
organic macromolecules would create coacervates. The first run was the control so no ammonia was
added but after each run, 2 drops of ammonia was added to see its effect of coacervates. On run 1,
49 coacervates was recorded. This data confirmed Oparin's theory ... Show more content on
Helpwriting.net ...
Another error could be the small sample space. Only vial was tested so the data is not very reliable.
If more vials were tested, it could help disprove the mistake of this experiment or confirm it by
making it more legitimate with consistent results. The unequal amount of solution on each
microscope slide could also be an error. Even though only 1 drop of solution was dropped onto the
slide each run, the pipets are not precise and could lead to some drop being bigger than other. The
bigger drop would have more coacervates than the smaller drop. This could make the data less
reliable since a variable was added which makes it harder to understand the effect of ammonia on
the formation of coacervates. Understanding the impact of chemicals in the atmosphere and the
presence of water is very important in identifying life. Scientists are currently observing other
planets in the universe and determine their potential to sustain life by studying the planet's
atmospheric makeup. By comparing its atmosphere to Earth's atmosphere, scientists can determine
if life exist on a distant planet without going there

What is Fermentation? Essay
Introduction:
Fermentation a metabolic process with occurs in the absence of oxygen molecules also known as an
anabolic reaction. It is a process of glycolysis in which sugar molecules are used to create ATP.
Fermentation has many forms the two most known examples are lactic acid and alcoholic
fermentation (Cressy). Lactic acid fermentation is used in many ranges from food production such
as bacteria to its use by fatigued muscles in complex organisms (Cressy). When experimenting with
organisms such as yeast which was done in this experiment you follow the metabolic pathway of
Alcoholic fermentation (Sadava). Where the sugar molecules are broken down and become ethanol
(Sadava). But the end product of fermentation is the production of ... Show more content on
Helpwriting.net ...
Showing that an acidic medium will still allow for yeast to ferment with little to no change from a
neutral pH which is supposed to be the optimal condition. But I predict that there will be a
significant change in how yeast will react in different conditions.
Methods:
Collect to 2 large beakers both large beakers are to be filled with hot water (labtutor). Then obtain
seven conical tubes these will be used to collect the levels of gas, you will also need test tube a
stopper and a plastic tube (labtutor). You want to fill the conical tube to at least 50 ml of water
(Cressy). Take the four conical tubes filled with water and place two in each beaker, to do this you
must invert the tube and cover the release hole as to not lose any water (Cressy). Then place the
beakers with the tubes in the bath so they can be at the same temperature as the bath (Cressy). Next
mark all of your test tubes in number order to be sure which tube contains what concentrations and
pH (Cressy). Having mixed a solution to the specifications of 2.5 ml of glucose in all tubes, 3 ml of
yeast in 2 tubes of pH 5, 2 tubes of pH 9, and the single pH 7 tube, the remaining two tubes will
contain no yeast as they will be negative controls. Next add 2 ml of pH buffer 3 tubes will receive
pH of 5, three will receive a pH of 9 and a single tube of pH 7. Finally add pure water to make sure
all test tubes have 10 ml of solution. When making the solutions

The Effects of Exercise on the Pulmonary Ventilation Rate
Respiration is the process that takes place in every living cell to make energy available to the body.
Energy is vital for us to carry out many life processes such as movement and so respiration in
essential to life. During respiration glucose and oxygen are used in a reaction that produces energy
and gives out carbon dioxide and water as waste products. Glucose is obtained by digestion of food
and oxygen is taken from the air during a process called breathing or ventilation. Pulmonary
Ventilation is the term given to the movement of air in and out of the lungs; the rate of pulmonary
ventilation is defined as the tidal volume multiplied by the number of breaths taken per minute.
Tidal volume is the volume of air breathed in or out during ... Show more content on
Helpwriting.net ...
The inspiratory system sends an impulse to the muscles of inspiration – the diaphragm and the
external intercostals muscles – and the stimulation of these muscles causes us to breathe in. As the
lungs expand due to inspiration this change is detected by pressure receptors of stretch receptors
which then stimulate the expiratory centre, which then stimulates the muscles of expiration – the
diaphragm and the internal intercostals

Essay on SCI 207 Week 4 Lab
Charles Jacquier Lab 4 – Energy Sources and Alternative Energy SCI 207 Professor Selhorst
Experiment 1: The Effects of Coal Mining Table 1: pH of Water Samples Water Sample Initial pH
Final pH (24–48 hours) Pyrite 5 5 Activated Carbon 5 7 Water 5 5 POST LAB QUESTIONS 1.
Develop hypotheses predicting the effect of pyrite and coal on the acidity of water? a. Pyrite
hypothesis = If pyrite is added to water, it will make the water more acidic. b. Coal hypothesis = If
the activated carbon is added to the water, it will make the water more acidic. 2. Based on the results
of your experiment, would you reject or accept each hypothesis that you produced in question 1?
Explain how you determined this. a. ... Show more content on Helpwriting.net ...
Based on the results of your experiment, would you reject or accept each hypothesis that you
produced in question 1? Explain how you determined this. Direct vs indirect accept/reject
=Rejected. The motor was just as fast when the solar panel was set up at a 45 degree angle Direct vs
reflected accept/reject = Accepted. When the foil was reflected at the solar panel, the motor moved
faster. Direct vs shaded accept/reject = At 25% shading–Rejected–The motor moved just as fast as
when the solar panel was completely exposed to sunlight. At 50%–Accepted–The motor moved
slower than when the solar panel was completely exposed to sunlight (speed medium to fast) At
75%–Accepted–The motor moved very slow compared to when the solar panel was completely
exposed to sunlight (Very slow) Direct vs filtered accept/reject = Rejected–Upon being covered by
the red, yellow, green, and blue cellophane, the motor moved the same as in direct sunlight 3. Does
increased exposure to the sun's light produce more current? Explain how you know this based on
your data. Answer = YES. The more exposure the solar panel had to the sun, the faster the motor
moved. Through a variety of trials with the solar panel and exposure to the sun, it was determined
that the more exposure the solar panel had, the

Effects of Acidic Depositon
The graph shows the pH value of acid rain water affecting crops in Vietnam. The two bar charts
represent two different places in Vietnam: Hoa Binh and Ha Noi. The graph proves that the
frequency of rain with below a pH of 5 is more frequent than above 5. This pH value results in the
crops growing less.
Like Vietnam, Canada is also facing issues with acidic deposition. A case study done by un.org
claims that 'The North American Maple is dying at a rate of 2.3% for each 100 exceedance units due
to the loss of calcium and other nutrients from soils. Lakes and streams are also remaining too acidic
or are not recovering to the point where they cannot support sensitive fish and aquatic biota. The
result is aquatic ecosystems that are unable to support a variety of species; therefore, biodiversity
continues to remain below pre–acidification levels."
After reviewing different examples of how pH affects other types of plants and seeds and the
scientific information of acid rain, it is now clear that the optimum pH for plant growth is between
5.5 and 7. It is also evident that acidic solution affects the growth rate, in which the pH's with a low
value slow down the growth process. There were a low number of seeds germinated in the pH of
1.65 and 2.11 due to the fact that seeds do not germinate efficiently at acidic solutions. However,
they do germinate at solutions of between 5.5 and 6.5. There is a chance that there was a decline at
pH 5 (the anomaly) due to the fact that it could

Chemistry lab report Essay
The goal of the project was to characterize an "unknown" organic acid in order to make a proper
identification of the acid, while learning proper techniques for scientific measurement and analysis
of error.
In order to ensure the most accurate data, a purification was performed by the process of
recrystallization. To perform the recrystallization the powder was dissolved in a minimal amount of
hot ethanol/H2O solvent that allowed the unknown powder to crystallize properly when cooled. This
process allowed for the removal of soluble impurities when suction filtered. A sample of the
unknown acid was weighed at 8.24 g, and it was found that 164ml of a 40% ethanol, 60% H20
solvent dissolved the 8.24 g of unknown acid when heated. The ... Show more content on
Helpwriting.net ...
Phenolphthalein was used as an endpoint indicator to determine the molarity of the NaOH solution,
which was found to be approximately .0979 M. The data collected from the titration follows in the
table below.
"NaOH Titration"
Trial I II III
Mass KHP (g) .403 .402 .411
Final NaOH 21.02mL 41.04mL 30.01mL
Initial NaOH .89mL 21.02mL 9.50mL
Volume NaOH Total 20.13mL 20.02mL 20.60mL
Molarity NaOH .0980 M .0980 M .0977 M
The molarity of each trial was found using the formula below; following the formula is a sample
calculation:
Molarity of NaOH Solution = Mass KHP (g) / [(204.34 g/mole) x (Delivered NaOH (ml)]
.403g /[(204.24g/mole)x(0.02013L)] = .0980 moles/liter

To ensure the best possible data, the error of the collected data was determined. This error was found
to be: (9.80–9.77)/9.77 = .003 x 100% = .31% error.
The equivalent weight of the unknown was determined by titration with NaOH. By discovering the
amount of NaOH required to react with the unknown acid, it was possible to determine the
equivalent weight of 98.4 g/mole. Three samples of the pure unknown acid were weighed at .403g,
.406g, and .394g. Each sample was placed in a flask and dissolved in approximately 40–50mL of the
heated solvent used in the recrystallization (40% ethanol/60% H2O). A drop of Phenolphthalein was
added to each flask. Each flask was titrated with the standardized

Is The Three To-One Blend Of Methylchloro Isothiazolinone
CMIT/MIT: The three–to–one blend of methylchloro–isothiazolinone (CMIT) and
methylisothiazolinone (MIT) is commonly used as a biocide in polymer dispersions. CMIT/MIT is a
broad–spectrum biocide that works between 3–9 pH. The mode of action for the CMIT/MIT is that
it reacts with the cell proteins causing the inhibition of respiration and ATP synthesis (PCIMAG).
Isothiazolones first mechanism which is performed in minutes is the swift inhibition of growth and
metabolism. This is then tailed by loss of viability due to irreversible cell damage which happens in
a matter of hours. Inhibition occurs by disrupting the metabolic pathways involving dehydrogenase
enzymes. Microbes are quickly inhibited due to the inhibition of critical physiological functions
including growth, respiration, and energy generation (adenosine triphosphate synthesis). Cell death
results in the destruction of protein thiols and production of free radicals. Compounds such as
surfactants can enhance and speed up the rate of inhibition and death. (Williams, 2007)
The interaction of isothiazolone biocides with microbial cells proceeds via several sequential
reactions. Initially, a biocide molecule reacts with a thiol group to form a disulphide linkage with the
biocide. This structure then interacts with a second thiol group to establish a new disulphide linkage.
Following this, the cell releases the biocide as a mercaptoacrylamide. The mercaptoacrylamide
derivative of CMIT tautomerizes to a thioacyl chloride under physiological conditions. The thioacyl
chloride is highly reactive and proceeds to interact with other cell macromolecules. The ability of
CMIT to degrade to a thioacyl chloride might account for it's much greater antimicrobial activity
when compared to BIT or MIT. (Daniel, 1997)
Barman did a study on the first–order rate constant and half–life values for the degradation of MIT
(Kathon 886 MW) and a MIT/CMIT (Kathon MWC) Mixture. These consist of 2–methyl–4–
isothiazolin–3–one and its chlorinated counterpart, 5–chloro–2–methyl–4–isothiazolin–3–one. At
100–fold more effective, the chlorinated counterpart is considered to be the active and require
concentrations 100–fold less than MIT. In fact, at very low concentrations of just 2–20 ppm

Enzyme Lab Report On Hydrogen Peroxide
Enzyme Lab Report
Hydrogen peroxide is a toxic byproduct of cellular functions. To maintain hydrogen peroxide levels
the catalase enzyme deconstructs hydrogen peroxide and reconstructs the reactants into oxygen gas
and water. The catalase enzyme is found inside cells of most plants and animals. Regulating the
levels of hydrogen peroxide is crucial in homeostasis and analyzing it's optimal conditions for
performance is just as important. To understand the optimal environment for this enzyme, they are
put into different environments based off protein activity (enzymes are proteins). Catalase samples
will be put into different hydrogen peroxide environments based off pH and temperature. The more
active the enzyme, the more oxygen and water it will produce. Enzyme activity can be seen through
the release of oxygen in the hydrogen peroxide. Since oxygen cannot be accurately measured, the
data will consist of the longevity of the reaction in different environments. If the pH is higher than 7,
then the reaction rate will increase due to the ample amount of hydrogen ions in the hydrogen
peroxide. However the pH level cannot be higher than 10 or else there will be too many hydrogen
atoms in the peroxide for the enzyme to be able to deconstruct them. If the temperature is increased,
then the reaction rate will increase due to the ample amount of energy and movement in the
hydrogen peroxide and enzyme.
Materials:
This investigation requires:
Juiced potato (catalase solution)

Part a: Dehydration of 1-Butanol & 2-Butanol/Part B:...
Ashley Droddy
CHM 235LL–Monday, 3/19/2012 & 3/26/2012
Part A: Dehydration of 1–butanol & 2–Butanol/Part B: Dehydrobromination of 1–Bromobutane
& 2–Bromobutane
Abstract
The objective of this experiment is to successfully perform a dehydration of 1–butanol and 2–
butanol, also dehydrobromination of 1–bromobutane and 2–bromobutane to form the alkene
products 1–butene, trans–2–butene, and cis–2–butene. The dehydration reactions react under and
acid–catalysis which follows an E1 mechanism. It was found that dehydration of 1–butanol yielded
3.84% cis–2–butene, 81.83% trans–2–butene, and 14.33% 1–butene, while 2–butanol is unknown
due to mechanical issues with the GC machine. For the dehydrobromination, with the addition of a
... Show more content on Helpwriting.net ...
That the more stable alkene trans–2–butene, is the major product at approximately 82%. While, the
two minor products would be 1–butene at 14%, and cis–2–butene at only approximately 4%.
Although, dehydration was not performed on 2–butanol, it would also produce the 3 isomeric
alkenes like 1–butanol via an E2 mechanism. The percentages would probably be very similar as
well. With trans–2–butene, being the major product, and cis–2–butene and 1–butene being minor
products as well. The GC results would appear again very similar to 1–butanol with 3 peaks
representing the 3 alkenes produced, however, 2–butanol has a lower BP, so it takes longer to react
and produce gaseous mixture because it is a secondary alcohol.
Part B: Dehydrobromination of 1–bromobutane & 2–bromobutane Compound | Temperature
(⁰C) | Products | Peak Area(mm2) | % Composition | 1–bromobutane | 90 | Trans–2–butene | ––––– |
–––– | | | Cis–2–butene | ––––– | –––– | | | 1–butene | 17500 | 100 | 2–bromobutane | 80 | Trans–2–
butene | 2469 | 49.95 | | | Cis–2–butene | 3336 | 13.09 | | | 1–butene | 8741 | 36.97 |
–(GC) Calculations for relative amount of products:
1–bromobutane:
Total peak area=17500 mm2
17500 mm2/17500 mm2x100%=100%, 1–butene
2–Bromobutane:
Total peak area=6679mm2
2469 mm2/6679 mm2x100%=36.97%, 1–butene
3336 mm2/6679 mm2x100%–=49.95% trans–2–butene

8741 mm2/6679 mm2x100%=13.09% cis–2–butene
1–bromobutane with a strong base reacts

An Unknown Grignard Reagent Experiment Essay
Grignard
5. Introduction In this experiment, an unknown Grignard reagent was prepared from an aryl halide.
The unknown reagent was then reacted with carbon dioxide to form a carboxylic acid. The solid acid
was then isolated and recrystallized before the melting point was taken. The precipitate was then
dissolved in water and titrated to determine the molecular weight. The melting point and molecular
weight were then used to determine the unknown acid obtained from the experiment.
6. Data and Results The product obtained had a melting point of approximately 107 °C and a weight
of .324 grams. Some of the product would not dissolve in water and so was removed through
vacuum filtration, which left .141 g not dissolved in solution. It took 13.2 mL of sodium hydroxide
to turn the solution of the product dissolved in water pink. A molecular weight of 138.63 g/mol was
calculated from the data. These results indicate that the product was 2–methylbenzoic acid, the
Grignard reagent was 2–methylphenylmagnesium bromide, and the unknown bromide solution was
2–methylbromobenzene. Calculations showed that the limiting reagent of the Grignard preparation
was magnesium and that the experiment had a 23.13 % yield. 7. Discussion and Conclusion
Organometallic compounds, such as Grignard reagents, are molecules containing carbon–metal
bonds and are often used to create new carbon–carbon bonds. Grignard reagents–or
organomagnesims– are specifically those that have a carbon–magnesium bond.

Coal Seam Gas
Coal seam gas (CSG) is mostly composed of methane and is typically attached to coal underground.
This gas is released when pressure on the coal seam is reduced by removing water from the seams
(Queensland Government, 2014 ). In order to obtain the gas, wells are drilled into the coal seams,
bringing water from the coal seams to the surface. This process reduces pressure and allows the gas
to be released (Queensland Government, 2014 ). CSG is an important energy resource in
Queensland and production of this gas takes up an ever–increasing proportion of Queensland gas
use. Almost every farmer in Queensland depends at times on underground water. The effect of CSG
extraction using underground fracturing on underground water is not clear. Basic sets of impacts that
are broadly well understood are that aquifer levels will sink dramatically and will depressurise. It
also risks groundwater contamination and the salt that is present in the water of coal seams will be
brought to the surface as well, in a quantity of about 1.8 million tonnes of salt per year (ABC, 2010).
There are several types of water contamination that are possible. One is through the injection of
chemicals through the fracking processes, which will go underground and can travel to nearby water
systems that are in use (Gasfield Free Northern Rivers, 2014). Another is through chemicals that
naturally exist in coal seams being taken out of the coal seams and exposed to other the various
water systems nearby. Some of

Application Of Edible Coating And Shelf Life Study Essay
Studies on various aspect and objectives related to the present research work were carried during the
year 2016 in Department of Food Technology, Guru Jambheshwar University of Science and
Technology Hisar, Haryana. This chapter deals with the experimental set up of various experiments
performed during the study. The experimental design and statistical analysis are also explained as
well.
3.1 Materials:
Shellac was provided by National Institute of Gum and Raisin, Ranchi. Chemicals were used in this
study was of analytical grade and best grapes was purchased from the local market of Hisar,
Haryana.
3.2 Methodology employed for application of edible coating and shelf life study:
3.2.1 Coating Solution Preparation and Application
Dewaxed shellac, oleic acid, morpholine and ammonia in predetermined quantities were dispersed
in 100ml distilled water as shown in Table 3.1. The Coating treatment performed named as S1, S2,
S3, S4, and S5. Oleic acid is used an emulsifier and antioxidant agent. The other component
morpholine as emulsifying agent and ammonia was used to dissolve shellac being insoluble in
water. Samples dipped in distilled water were used as Control.
The solution was heated with constant stirring on a heating mantle at 70⁰C for 6 minutes. Samples
were dipped in different concentration coating for 20sec and the excess coating was drained. The
coated samples were then kept for surface drying at room temp for 15mins. Dewaxed shellac:

Chemistry : The Effects Of Chemical Reacting, And Its Effects
Chemical weathering occurs when a rock or building material is eroded and/or disintegrated by a
chemical process. This will occur primarily when a water is mixed with a chemical. Chemical
weathering will also often occur by water and in areas where warmer water or temperatures more
frequently occur and are common (kidsgeo), as the process accelerates and thrives in these
conditions. Often this process will occur in warmer seasons in the summer or spring to take
advantage of the warmer weather in order to accelerate the process. There are three distinct types of
chemical weathering that can occur: oxidation, hydrolysis, and carbonation. Oxidation will occur
when a molecule will gain an extra oxygen molecule. A good example of this is rust (passel), which
occurs when iron reacts with oxygen and it becomes iron oxide. So when a rock goes oxidised is
becomes weaker and can break down easily as the extra oxygen has weakened its structure .
Hydrolysis will occur when an extra water molecule is added. And carbonation will occur when
water reacts with carbon dioxide to form a carbonic acid, which can hollow out rocks by breaking
them down, leading to cave formations.
Purpose: The purpose of this lab is to demonstrate the effects of chemical weathering on zinc.
Hypothesis
If metal is placed in mixture of acid and water then the amount of rust will increase because the
metal will be more exposed to the acid for a period of time with one or the other mixture

Chemical Reactions
Chemistry
"Chemical Reaction and the PH Scale" Chemical reactions are the heart of chemistry. People have
always known that they exist. The Ancient Greeks were the firsts to speculate on the composition of
matter. They thought that it was possible that individual particles made up matter. As you might
imagine, it's useful to be able to measure the acidity of solutions. Scientists have come up with the
pH scale for determining the concentration of acid in a solution so we can distinguish between
solutions with varying acidity. A Chemical reaction is the outcome of two or more elements together
results in the formation of a chemical bond between atoms and compound. Chemicals react together
due to ... Show more content on Helpwriting.net ...
The PH Scale which is a diagram that is used to show the different measurements of water. In
general is important to know how the pH scale works because it determines whether or not a liquid
is acidic or

Depakote Essay

Recommended

Recommended

More Related Content

More from Amy Alexander

More from Amy Alexander (20)

Recently uploaded

Recently uploaded (20)

Depakote Essay