1. CURRICULUM VITAE
ULYSSES N. BUSTILLO
Site Electrical Engineer
QA/QC Inspection Engineer (PID)
M | +966-501470337
E | yulbustillo@yahoo.com
CAREER OBJECTIVE
To gain a tough position in a growth oriented organization that will support me to apply my
knowledge, technique and experienced in the field of construction in local or abroad, while providing
me with ample opportunity for the development of existing strength, skills and potentials.
CAREER SUMMARY
Twenty (20) years overall experienced in the field of Plant operations and construction industries, in
which nine (9) years were attributed in multi-million budgeted projects across Middle East. Extensive
exposure with Petrochemical plants, LNG plants and Hydrocarbon Processing Facilities.
Accomplished project management team in huge projects of Saudi Aramco, Sabic, and Qatar Gas.
PROFESSIONAL QUALIFICATIONS
• Bachelor of Science in Electrical Engineering - 1994 (Graduated)
• Saudi Aramco approved personnel with SAP # 70012745
• ISO 9001:2008 QMS Internal Audit Course (SGS International)
• Familiar with SAES, SATIP, NEC, IEC, IEEE, NETA & NEMA.
• Proficient exposure in Quality Management Information System (QMIS) & Windows Project
Completion System (WINPCS).
• Proficient in MS Office-Word, Excel, Power Point & Outlook.
• Good interpersonal and communication skills.
• Capable of handling major roles and ability to motivate people.
• Possessed Saudi Arabia Driver's License.
TECHNICAL CAPABILITIES
• Voltage drop calculations, short circuit calculation, transformer sizing, main distribution board
sizing and load calculation, distribution panels short circuit protection, MCB selections,
power factor corrections and capacitor banks, motor load calculation, lighting and power
circuit calculation, grounding system.
• Pre-commissioning and Commissioning of Power distribution facilities , Relay & Control
panels, 34.5KV Switchgear (GIS & Air insulated), MCC, 15KV Switchgears SF6 (vacuum
and air circuit breakers), Oil filled transformers, Dry type transformers, LV and HV motors
Solo Run Test, Hi-Pot test of HV & MV Power Cables,
• Supervision of various electrical installation such as HV & MV Power Transformers, Dry
Type Transformer, Busduct, Neutral Ground Resistor, MV & LV Switchgears, MCC, RTCC,
Load Shedding, Line Protection System, Annunciator, Interposing Relay, DC Battery
Charger, UPS, Lighting Panel, Fire Alarm & Detection System and Lighting System, Cable
Pulling, MV Cable Splicing and Termination, Electric Motors and LCS, Grounding system,
Lightning Protection System, Building lightings, and Street lightings.
Page 1 of 5
2. QUALITY MANAGEMENT SYSTEM
• Implementation of ISO9001-2008 Quality Management System
• Evaluate Contractors Project Quality Plan (PQP).
• Evaluate submitted Inspection Test Plan (ITP).
• Evaluate Method of Statements and Work Procedures.
• Review periodic Quality Monthly Report (QMR).
• Review Quality Audit Report submitted by Third Party Agency.
• Maintains issued Company NCR & EDR Reports
• Implementation of Schedule Q provisions as per contract.
• Conduct screening of proposed Quality Personnel.
• Prepare Monthly Project Quality Index (PQI).
• Prepare weekly Project Quality Dashboard.
• Conduct QA/QC coordination meeting with the contractor weekly.
PROFESSIONAL EXPERIENCES
Project : Rabigh II Refining & Petrochemical Project
(Sumitomo Chemical Co. & Saudi Aramco)
Designation : QA/QC Electrical Inspector (PID)
Supplied : Rabigh II Program Execution Department
Company : Velosi Saudi Arabia Co. Ltd.
Location : Rabigh, Saudi Arabia
Period : November 13, 2013 - Present
Project : Manifa Core Hydrocarbon Central Processing
Designation : QA/QC Electrical Inspector - (PID)
Supplied : Saudi Aramco Project Inspection Division
Company : Velosi Saudi Arabia Co. Ltd.
Location : Manifa, Eastern Province Saudi Arabia
Period : October 18, 2010 - September 13, 2013
Project : LNG - Common Sulphur Plant
Designation : QA/QC Electrical Inspector (PMT)
Supplied : Qatar Gas II Project Management Team (PMT)
Company : Velosi Certification LLC - Qatar
Location : Ras Laffan, Qatar
Period : July 14, 2008 - March 31, 2010
Project : Yanbu National Petrochemical Company (SABIC)
Designation : QA/QC Electrical Inspector
Client : Fluor Arabia Limited
Company : Al Suwaidi Industrial Services Ltd.
Location : Yanbu, Saudi Arabia
Period : February 22, 2006 - March 30, 2008
KEY JOB RESPONSIBILITIES (QA/QC)
Page 2 of 5
3. • Review Project Specifications, Engineering Standards, ITP's and IFC drawings.
• Issue Non Conformance Report (NCR) to any severe violations that do not met Project
Specification and Engineering standard.
• Issue Logbook Entry to any violation found not meeting with the project requirement.
• Issue Proactive Notification to remind and prevent potential violations that may arise.
• Attend Hold Point and Witness Inspections requested by contractor for the completed job.
• Perform receiving inspections and ensure that materials are within tolerance, grade and
quality specified, and in accordance with Saudi Aramco Material System Specification
(SAMSS).
• Periodic monitoring of all stocked materials and equipment and ensure the approved
preservation procedure and manufacturer's recommendation are well implemented.
• Witnessed electrical pre-commissioning and commissioning activities.
• Participate in the mechanical completion activities and keep all EIL items are properly
recorded and maintained.
• Perform focused assessments of specific activity to ensure compliance with the project
specification.
• Ensures all redline drawings are incorporated, accessible and transparent.
• Conduct evaluation of Contractor and subcontractors QC personnel.
• Prepare Monthly Project Quality Index (PQI).
• Prepare weekly Project Quality Dashboard.
• Conduct QA/QC coordination meeting with the contractor weekly.
• Prepare daily, weekly and monthly periodic reports.
Project : Tamiya Plant-2 Expansion Project
Designation : Site Engineer
Location : MEPZ-2 , Basak, Lapu-lapu City, Philippines
Company : Degalen Mansteel Corporation
Period : March 16, 2000 - April 05, 2005
KEY JOB RESPONSIBILITIES
• Ensure that current versions of the Project Specifications, and Engineering Standards are
well implemented.
• Assist in tender administration work and preparation of Project Quality Execution Plan.
• Responsible in the preparation of Request for Inspection (RFI), Technical Queries (TQ) and
Deviation Request (DR).
• Draft and execute project schedule that is developed based on Master Schedule's
requirement.
• Ensure timely submission of monthly progress claims for project, variations or additional
works, material usage status, work activities program.
• Plan and manage project which includes the developing of job schedules, identification and
mobilization of resources.
• Best sourcing, evaluates, and recommends vendors for the supplying of equipment and
materials, Ensure smooth execution of project under my custody.
• Attend discussions and coordination meetings with the client representative to resolved
certain issue regarding design requirements, IFC drawing conflicts between other
disciplines, project specification violations and Safety Issues.
• Prepare two days look ahead work schedules programs, material monitoring and
requisitions.
Page 3 of 5
4. • Prepare daily, weekly and monthly periodic reports.
Company : EMCO Plywood Corporation
Designation : Maintenance Foreman
Location : Magallanes, Agusan Del Norte, Philippines
Period : June 24, 1995 - December 28, 1999
KEY JOB RESPONSIBILITIES
• In-charge for operation, maintenance and repair works on plant utilities and facilities
equipment such as steam generating units (boilers), water softeners, carbon beds, de-
ionizers. Centralized compressed air system for production use and pneumatically operated
machineries. Centralized domestic water pumps, conveying system, building emergency
lighting system, fire alarm and firefighting system and waste water treatment plant facilities.
• Operation and maintenance of plant electrical substation & power distribution switchyards.
Safeguarding and monitoring of MV switchgears and logs for daily operations. Conduct
monthly preventive maintenance checking on all electrical facilities and machineries.
EDUCATION
• Bachelor of Science in Electrical Engineering
Saint Joseph Institute of Technology
Butuan City, Philippines
Graduated - April 1995
• Electrical Upgrading Course
Cebu State College of Science and Technology (CSCSAT)
Cebu City, Philippines
Inclusive Date: Aug. 21 - Sept. 26, 2000
• Certificate of Competency
Building Wiring Electricity
Technical Education & Skill Development Authority (TESDA)
Cebu City, Philippines
• Certificate of Competency
Industrial Wiring Electricity
Technical Education & Skill Development Authority (TESDA)
Cebu City, Philippines
TRAINING CERTIFICATES & SEMINARS
• ISO 9001:2008 QMS Internal Audit Course - (SGS International)
• Power Factor Correction & Sizing of Capacitor Bank - (IIEE WRCSA Jeddah, KSA)
• Design & Installation of Generator – (IIEE WRCSA Jeddah KSA)
• Power Factor Correction Through Harmonic Filter & VFD – (IIEE WRCSA Jeddah KSA)
• Motor Drives Service & Maintenance – (IIEE WRCSA Jeddah KSA)
• Voltage Drop Calculation – (IIEE WRCSA Jeddah KSA)
• Instrumentation & Control System / PLC Programming – (IIEE WRCSA Jeddah KSA)
WORK REFERENCES
• National Electrical Code NFPA 70 (NEC)
Page 4 of 5
5. • National Electrical Manufacturer Association (NEMA)
• International Electro-technical Commission (IEC)
• Institute of Electrical and Electronic Engineers (IEEE)
• Inter National Electrical Testing Association (NETA)
• Saudi Aramco Engineering Standards (SAES)
• Saudi Aramco Material System Specifications (SAMSS)
PERSONAL INFORMATION
Nationality : Filipino
Age : 45
Date of Birth : May 5, 1970
Civil Status : Married
Religion : Catholic
Language : English,
Tagalog,
Passport : EC0446374
Issued : 01-Mar-2014
Expire : 28-Feb-2019
Place of Issue : PCG Jeddah
CHARACTER REFERENCES
Hashem A. Mir
Engineer III SAPID
+966 506826190
hashem.mir@aramco.com
Darwin Ilagan
Sr. Inspection Engr. / SAPID
+966 530501354
darwin.ilagan@aramco.com
Rogelio R. Gonzaga
Construction Engineer II / SAPMT
+966 540984151
rogelio.gonzaga@aramco.com
Page 5 of 5
6. • National Electrical Manufacturer Association (NEMA)
• International Electro-technical Commission (IEC)
• Institute of Electrical and Electronic Engineers (IEEE)
• Inter National Electrical Testing Association (NETA)
• Saudi Aramco Engineering Standards (SAES)
• Saudi Aramco Material System Specifications (SAMSS)
PERSONAL INFORMATION
Nationality : Filipino
Age : 45
Date of Birth : May 5, 1970
Civil Status : Married
Religion : Catholic
Language : English,
Tagalog,
Passport : EC0446374
Issued : 01-Mar-2014
Expire : 28-Feb-2019
Place of Issue : PCG Jeddah
CHARACTER REFERENCES
Hashem A. Mir
Engineer III SAPID
+966 506826190
hashem.mir@aramco.com
Darwin Ilagan
Sr. Inspection Engr. / SAPID
+966 530501354
darwin.ilagan@aramco.com
Rogelio R. Gonzaga
Construction Engineer II / SAPMT
+966 540984151
rogelio.gonzaga@aramco.com
Page 5 of 5