1. Efren R. Molina
Civil Engineer(PRCLic. No.0057016)
14 Zamora St.,Sta. Lucia, Novaliches
QuezonCity,Philippines
E-mail:efrenmolina540@gmail.com
Career Objectives:
To work in a prestigious andworld-class projects to be able to contribute to the best of myabilityandworks experienced,
following procedures andcriteria. More than18 years working experienced onthe project engineering
supervision/implementationandqualitycontrol management/ inspectionof heavy industries, andcivil/architectural and
structural constructionworks on concrete/ structural buildings;power plants oil andgas pipe lines / pipe racks;water/waste
treatment plant;floodcontrol;highways, roadand infrastructure projects.
PROFESSIONAL EXPERIENCED
May 17, 2015 to Present
AECOM Middle East
4th Floor, Jaidah Square, Umm Ghuwalina, Al Matar Street
PO Box: 6650 Doha, State of Qatar
+974 668 04230
PWA - LR & DP IN SOUTH WUKAIR – PACKAGE 2B - GRADING
Civil Engineer
Job Summary:
Reporting totheResidentEngineer, the SiteEngineer is responsiblefor all aspects oftheinspectionactivities on the project. The Site
Engineer’s tasks areto observe theContractor’s constructionpractices and progress ofwork inaccordancewith therequirements ofthe
Contract. The Site Engineeris requiredto liaisewith the Contractor’s Staffand Utilities companies to co-ordinateworks between the two
parties.
Duties andResponsibilities:
The Site Engineer ensures inspections of the Works are to be carried out on site to monitor compliance of the execution of the
Works in relation to the Project Works Authority requirements and the Design. The Site Engineer is to provide technicalsupport to
the Senior Works Inspectors in performing their monitoring of the Contractor’s compliance in the execution of the Works; they are
expected to:
 Ensure the correct contract drawings and specifications are used by the site supervision teamin the monitoring of the
w orks;
 Review shop drawings and materialsubmissions; make recommendation for approvalor otherwise to the Resident
Engineer;
 Provide input for the Resident Engineer to respond to the Contractor’s technicalqueries;
 Monitor w orkon variations, maintain records and feedbackof the effectson progress to the Resident Engineer;
 Investigate construction issuesand provide solutions and corrective actions forthe Resident Engineer to issue instructions
for additional w orks or variations;
 Provide information and input fromthe inspection team to the monthly progress report;
 Liaise and coordinate betw een the Contractor and Utilities authorities on diversionary w orks;
 Reviewthe Contractors inspectionandtest plans in accordance withthe contract requirements andcoordinate inspections with the
Senior Works InspectorandSenior Materials Engineer, ensuringall inspectionandtestingactivities are carriedout in accordancewith
project procedures;

2.  Ensure sign off all Requests for Inspection(RFI)andholdpoints withthe Contractor;
 Where work or materials do not comply;report to the Resident Engineer that the work or materials must be re-tested,
remedied or removed, as appropriateor an Non-Conformance Report (NCR) raised;
 Ensure non-compliant works are re-tested, remedied or removed and NCR’s are closed out by theContractor; and,
Liaise with theQA/QC Engineer and Safety Engineer to flag and rectify any issues which may affect the quality and safety of the
Works.
August 27, 2011 to MARCH 15, 2014
Gusan Construction Company Ltd.
Rabigh II Refining and Petro Chemical Project (CP3 & CP4) Rabigh,KSA
Wasit Cogen and Steam Generation Project (Saudi Aramco) Jubail, KSA
QA/QC Civil Inspector SAP # 70014879
QA/QC Engineer will be responsible for providing the Quality Assurance & Quality Control on assigned projects during the Construction
Supervision on the project. This role will ensure conformance to high level of quality, performance, and/or code requirements by performing
audit duties on the contractor and third parties, continuous communication with the contractor to achieve the contract requirements, and
management andimplementation ofthe projectQuality ManagementSystem.
Conduct Quality Meetings withCONTRACTORS on regulartime interval.
AreasCovered;
Manage thequality assurance/quality controlfunction on-siteon various projectphases.
• Prepareproject site related reports and presentations as required andproduce performancemeasurement tools tomonitor
contractors and project performance.
• Ensure that theapproved Inspectionand Test Plan (ITP) and Method Statement areimplementedby thecontractor on siteandthe
particular hold points required arecoordinatedwiththeProjectTeam.
• Initiate and superviseindependentthirdparty testing at projectsiteto ensurecompliancewith project specifications.
• Provide technical assistanceand adviceto Project Team oninspection levels, materials testing Certification and Handover
Documentation.
• Conduct Quality or technicalcomplianceaudits for Contractor, Sub Contractor or Vendors.
• Review thecontract documents for each Construction stage/phase in respect ofQA/QC requirements and procedures and advisethe
SRE of any deficiency.
• Review QA/QC organization;make surethat, key personnelCV’s are submittedby theCONTRACTORS and reviewedby GEC’s relevant
personnel, and advise the SRE ofhis comments.
• Review QA/QC Procedures as submittedby theCONTRACTORS and ensure implementation is incompliancewith AGREEMENT
requirements.
• Review Inspection, Test, Plans as submitted by theCONTRACTORS and ensurecompliancewith AGREEMENTrequirements.
• Attend activities onsiteand ensuretheir compliancewith QA/QC procedurein respectoftheformat signedoffby Contractor’s QA/QC
Manager.
• Check allmaterials and equipment as delivered onsiteand ensureits compliancewith approvedmaterials and specification.
• Closely monitor siteactivities,fully coordinatewith PMCdisciplineengineers, issuing NCR’s in case ofnon-complianceand reporting to
Senior ResidenceEngineer incase ofshortage ofskilled labourers and/or sitesupervisionstaff.
• Participatewith PMCstaffin reviewing theClose-OutReportas submitted by CONTRACTORS.
• Coordinatewith CONTRACTOR’s QA/QC representative.
• Ensure that CONTRACTOR establish andsubmit a Project-Specific QualityPlan andany other contractualrequirement.
• Maintain and measureCONTRACTOR’s compliancewith AGREEMENT’s ANNEXURES as wellas the Technical Specification.

3. Civil Works –Foundations for Gas Turbine Generators, Heat Recovery Steams Generators,and Steam Generators; Main Auxiliary Transformers;
Gas PipeLines/Pipe Racks;Cooling Towers Basins and Connecting Channels; cooling WaterPumpHouse; StorageTanks for Portable
Demineralized,Condensateand FireWater; Irrigation Basin; Underground,Drainage,Sewageand ChemicalSystem; Roads and Infrastructure;
Landscaping.
Building Works -Gas Insulated Switchgear; Admin &CCR; workshop; Boiler FeedPump House;Firewater Pump House; ElectricalBuildings.
Structural Works –Turbinebuilding; PipeRacks; Miscellaneous Steel works; Gas andSteamTurbineGenerator; Workshopand Admin Building;
Pipe Racks; Heat Recovery Steam Generators; Oiland Gas Water TreatmentPlants; Irrigation Basins; Gas InsulatedSwitchGear;Boiler feed
Water Pumps House; Circulating Water Pumps Sump; Cooling Tower/Basin; Water; Fuel Oil; Chemical; CondensateStorage Tanks and Reservoir,
Manholes and other appurtenant structures.
June 20, 2010to June202011
The ZenitakaCorporation
The Rehabilitation ofHospital and Supply of Equipment in Central Uganda
Quality Assurance/Quality ControlEngineer
QA/QC Engineer will be responsible for providing the Quality Assurance & Quality Control on assigned projects during the Cons truction
Supervision on the project. This role will ensure conformance to high level of quality, performance, and/or code requirements by performing
audit duties on the contractor and third parties, continuous communication with the contractor to achieve the contract requirements, and
management andimplementation ofthe projectQuality ManagementSystem.
Manage thequality assurance/quality controlfunction on-siteon various projectphases.
• Prepareproject site related reports and presentations as required andproduce performancemeasurement tools tomonitor
contractors and project performance.
• Ensure that theapproved Inspectionand Test Plan (ITP) and Method Statement areimplementedby thecontractor on siteandthe
particular hold points required arecoordinatedwiththeProjectTeam.
• Initiate and superviseindependentthirdparty testing at projectsiteto ensurecompliancewith project specifications.
• Provide technical assistanceand adviceto Project Team oninspection levels, materials testing Certification and Handover
Documentation.
• Conduct Quality or technicalcomplianceaudits for Contractor, Sub Contractor or Vendors.
• Review thecontract documents for each Construction stage/phase in respect ofQA/QC requirements and procedures and advisethe
SRE of any deficiency.
• Review QA/QC organization;make surethat, key personnelCV’s are submittedby theCONTRACTORS and reviewedby GEC’s relevant
personnel, and advise the SRE ofhis comments.
• Review QA/QC Procedures as submittedby theCONTRACTORS and ensure implementation is incompliancewith AGREEMENT
requirements.
• Review Inspection, Test, Plans as submitted by theCONTRACTORS and ensurecompliancewith AGREEMENTrequirements.
• Attend activities onsiteand ensuretheir compliancewith QA/QC procedurein respectoftheformat signedoffby Contractor’s QA/QC
Manager.
• Check allmaterials and equipment as delivered onsiteand ensureits compliancewith approvedmaterials and specification.
• Closely monitor siteactivities,fully coordinatewith PMCdisciplineengineers, issuing NCR’s in case ofnon-complianceand reporting to
Senior ResidenceEngineer incase ofshortage ofskilled labourers and/or sitesupervisionstaff.
• Participatewith PMCstaffin reviewing theClose-OutReportas submitted by CONTRACTORS.
• Coordinatewith CONTRACTOR’s QA/QC representative.
• Ensure that CONTRACTOR establish andsubmit a Project-Specific QualityPlan andany other contractualrequirement.
• Maintain and measureCONTRACTOR’s compliancewith AGREEMENT’s ANNEXURES as wellas the Technical Specification.
May 30, 2009 to April15, 2010
Hanil Construction Company Ltd.
1000 Housing UnitProject(Sorman, Tripoli, Libya)

4. Quality Assurance/Quality ControlEngineer
QA/QC Engineer will be responsible for providing the Quality Assurance & Quality Control on assigned projects during the Cons truction
Supervision on the project. This role will ensure conformance to high level of quality, performance, and/or code requirements by performing
audit duties on the contractor and third parties, continuous communication with the contractor to achieve the contract requirements, and
management andimplementation ofthe projectQuality ManagementSystem.
Manage thequality assurance/quality controlfunction on-siteon various projectphases.
• Prepareproject site related reports and presentations as required andproduce performancemeasurement tools tomonitor
contractors and project performance.
• Ensure that theapproved Inspectionand Test Plan (ITP) and Method Statement areimplementedby thecontractor on siteandthe
particular hold points required arecoordinatedwiththeProjectTeam.
• Initiate and superviseindependentthirdparty testing at projectsiteto ensurecompliancewith project specifications.
• Provide technical assistanceand adviceto Project Team oninspection levels, materials testing Certification and Handover
Documentation.
• Conduct Quality or technicalcomplianceaudits for Contractor, Sub Contractor or Vendors.
• Review thecontract documents for each Construction stage/phase in respect ofQA/QC requirements and procedures and advisethe
SREof any deficiency.
• Review QA/QC organization;make surethat, key personnelCV’s are submittedby theCONTRACTORS and reviewedby GEC’s relevant
personnel, and advise the SRE ofhis comments.
• Review QA/QC Procedures as submittedby theCONTRACTORS and ensure implementation is incompliancewith AGREEMENT
requirements.
• Review Inspection, Test, Plans as submitted by theCONTRACTORS and ensurecompliancewith AGREEMENTrequirements.
• Attend activities onsiteand ensuretheir compliancewith QA/QC procedurein respectoftheformat signedoffby Contractor’s QA/QC
Manager.
• Check allmaterials and equipment as delivered onsiteand ensureits compliancewith approvedmaterials and specification.
• Closely monitor siteactivities,fully coordinatewith PMCdisciplineengineers, issuing NCR’s in case ofnon-complianceand reporting to
Senior ResidenceEngineer incase ofshortage ofskilled labourers and/or sitesupervisionstaff.
• Participatewith PMCstaffin reviewing theClose-OutReportas submitted by CONTRACTORS.
• Coordinatewith CONTRACTOR’s QA/QC representative.
• Ensure that CONTRACTOR establish andsubmit a Project-Specific QualityPlan andany other contractualrequirement.
• Maintain and measure CONTRACTOR’s compliancewith AGREEMENT’s ANNEXURES as well as the Technical Specification.
April 02, 2006to April 30, 2009
OverseasEngineering and Construction Company Ltd. SA
Langley Park to Rabacca Road Rehabilitation Project and ArnosVale
SportsComplex (Administration Center and PlayersPavillion Building)
Project (Saint Vincent and theGranadines)South America
Quality Control Engineer
QA/QC Engineer will be responsible for providing the Quality Assurance & Quality Control on assigned projects during the Construction
Supervision on the project. This role will ensure conformance to high level of quality, performance, and/or code requirements by performing
audit duties on the contractor and third parties, continuous communication with the contractor to achieve the contract requirements, and
management andimplementation ofthe projectQuality ManagementSystem.
Manage thequality assurance/quality controlfunction on-siteon various projectphases.
• Prepareproject site related reports and presentations as required andproduce performancemeasurement tools tomonitor
contractors and project performance.
• Ensure that theapproved Inspectionand Test Plan (ITP) and Method Statement areimplementedby thecontractor on siteandthe
particular hold points required arecoordinatedwiththeProjectTeam.

5. • Initiate and superviseindependentthirdparty testing at projectsiteto ensurecompliancewith project specifications.
• Provide technical assistanceand adviceto Project Team oninspection levels, materials testing Certification and Handover
Documentation.
• Conduct Quality or technicalcomplianceaudits for Contractor, Sub Contractor or Vendors.
• Review thecontract documents for each Construction stage/phase in respect ofQA/QC requirements and procedures and advisethe
SRE of any deficiency.
• Review QA/QC organization;make surethat, key personnelCV’s are submittedby theCONTRACTORS and reviewedby GEC’s relevant
personnel, and advise the SRE ofhis comments.
• Review QA/QC Procedures as submittedby theCONTRACTORS and ensure implementation is incompliancewith AGREEMENT
requirements.
• Review Inspection, Test, Plans as submitted by theCONTRACTORS and ensurecompliancewith AGREEMENT requirements.
• Attend activities onsiteand ensuretheir compliancewith QA/QC procedurein respectoftheformat signedoffby Contractor’s QA/QC
Manager.
• Check allmaterials and equipment as delivered onsiteand ensureits compliancewith approvedmaterials and specification.
• Closely monitor siteactivities,fully coordinatewith PMCdisciplineengineers, issuing NCR’s in case ofnon-complianceand reporting to
Senior ResidenceEngineer incase ofshortage ofskilled labourers and/or sitesupervisionstaff.
December 28,2002 toFebruary 04,2005
Hanil Construction Company Ltd.
Southwest Road Network Development Project Contract2 Mawa (Charjahat-Bhanga)Madaripur, Bangladesh
MaterialsEngineer
Duties andResponsibilities
Ascertain that theworks has been plannedandorganizedwith respect toquality control management.
Preparationof Method ofStatementfor scheduled works.
February 27, 2005 to February 26, 2006
Samwhan Corporation
Emergency Infrastructure Rehabilitation and ReconstructionProject
ADB Loan no. 1997-AFG SF)Balkh viaSheberghan to Andkhoy Road Project(Afghanistan)
Site Engineer
- Review and checkplans related to the w ater supply, water distribution, watertreatment, w astewatertreatment, and
w astewater collection structuresand facilities.
- Review and issue street opening permits, construction water meter applications, and w astewater discharge permits;
maintain necessary records.
- Prepare progress reports on projects under construction; maintain records of changes and field notes; prepare nec essary
correspondence,daily inspection report, and punch lists.
- Investigate field problems affecting propertyowners, contractors,and maintenance operations.
- Coordinate assigned activities w ith consultants, engineers, developers, contractors, other City departments and divisions,
and outside agencies.
- Develop plans, specifications, requestsfor proposals, and other contract documents.
- Review contractorbilling; approve progress payments; ensure completion of w orkin accordance with contract provisions
and performother related contract administration duties.
- Prepare comprehensive specialengineering studies and reports; performspecialassignments on engineering problems
as necessary.
- Calculate the quantity, quality, and cost of materials used for various projects.
- Compile report, and prepare graphs and table, of utility operations systemdata.
- Review engineering calculations of other engineers or engineering technicians.
- Monitor the status of projects for compliance to City procedures and construction and engineering standards; recommend
corrective actions as needed.
- Provide information to the generalpublic; participate in public aw arenessprograms; respond to citizen inquiries and
complaints.
- Conduct public w orksinspection of workmanship, materials, and methods for
capital improvement, subdivision, and permit projects

6. Demonstrateby documented records,that the works has been carriedout andinspected to requiredquality.
Preparedesign mixes for concrete, bituminous hotmix binder course andwearing course.
Ensure the inspection and testing incompliancewith established quality assurance plan.
Ascertain collectionofdocumentation certificates relatedto material purchased.
Ensure the compliance offinaldocumentationto beissued to the client.
Ensuring that the works are donein a timely manner and inaccordancewith and sound engineering practices.
Oversee the work progressionon thesite and ensures thattheworks aredone in accordancewith approved drawings, specification and other
requirements.
Oversee the overall conduct oftheworks in terms ofcomplianceto the quality,safety, socialandenvironmentalaspect.
Regularly keeps therecords ofall construction activities andshallliaiseand coordinatewith engineer’s representatives regarding therequired
inspection of theworks.
May 28, 2000 to May 28, 2002
National Prawn Company Ltd.
Al lith, Kingdom ofSaudi Arabia
Laboratory Engineer
Ascertain that theworks has been plannedandorganizedwith respect toquality control management.
Preparationof Method ofStatementfor scheduled works.
Demonstrateby documented records,that the works has been carriedout andinspected to requiredquality.
Preparedesign mixes for concrete, bituminous hotmix binder course andwearing course.
Ensure the inspection and testing incompliancewith established quality assurance plan.
Ascertain collectionofdocumentation certificates relatedto material purchased.
Ensure the compliance offinaldocumentationto beissued to the client.
Ensuring that the works are donein a timely manner and inaccordancewith and sound engineering practices.
Oversee the work progressionon thesite and ensures thattheworks aredone in accordancewith approved drawings, Technical specification
and other requirements.
Oversee the overall conduct oftheworks in terms ofcomplianceto the quality,safety, socialandenvironmentalaspect.
Regularly keeps therecords ofall construction activities andshallliaiseand coordinatewith engineer’s representatives regarding therequired
inspection of theworks.
October 18, 1996to December 18, 1999
Hyundai Engineering and Construction Company Ltd. –JAN DENUL Joint Venture.
River Bank ProtectionProject (BramaputraRight Bank Priority Works)Sirajgonj, Bangladesh
Quality Control Engineer
Manage thequality assurance/quality controlfunction on-siteon various projectphases.
• Prepareproject site related reports and presentations as required andproduce performancemeasurement tools tomonitor
contractors and project performance.
• Ensure that theapproved Inspectionand Test Plan (ITP) and Method Statement areimplementedby thecontractor on siteandthe
particular hold points required arecoordinatedwiththeProjectTeam.
• Initiate and superviseindependentthirdparty testing at projectsiteto ensurecompliancewith project specifications.
• Provide technical assistanceand adviceto Project Team oninspection levels, materials testing Certification and Handover
Documentation.
• Conduct Quality or technicalcomplianceaudits for Contractor, Sub Contractor or Vendors.
• Review thecontract documents for each Construction stage/phase in respect ofQA/QC requirements and procedures and advisethe
SRE of any deficiency.
• Review QA/QC organization;make surethat, key personnelCV’s are submittedby theCONTRACTORS and reviewedby GEC’s relevant
personnel, and advisedtheSRE ofhis comments.
• Review QA/QC Procedures as submittedby theCONTRACTORS and ensure implementation is incompliancewith AGREEMENT
requirements.
• Review Inspection, Test, Plans as submitted by the CONTRACTORS and ensurecompliancewith AGREEMENTrequirements.
• Attend activities onsiteand ensuretheir compliancewith QA/QC procedurein respectoftheformat signedoffby Contractor’s QA/QC
Manager.
• Check allmaterials and equipment as delivered onsiteand ensureits compliancewith approvedmaterials and specification.
• Closely monitor siteactivities,fully coordinatewith PMCdisciplineengineers, issuing NCR’s in case ofnon-complianceand reporting to
Senior ResidenceEngineer incase ofshortage ofskilled laborers and/or sitesupervision staff.

7. • Participatewith PMCstaffin reviewing theClose-OutReportas submitted by CONTRACTORS.
• Coordinatewith CONTRACTOR’s QA/QC representative.
• Ensure that CONTRACTOR establish andsubmit a Project-Specific QualityPlan andany other contractualrequirement.
• Maintain and measureCONTRACTOR’s compliancewith AGREEMENT’s ANNEXURES as wellas the Technical Specification.
July 01,1996 toOctober 16, 1996
Techphil Incorporated
Rural Road Development Project; Cavite, Philippines
MaterialsEngineer
Handles thesupervision ofMaterialand Quality Controlofthe Project.
Checks and review thedifferent concrete mix designs submitted by thecontractor priorto use in theproject.
Conduct materials investigationof ongoing and completed works intheproject.
Ascertained that allmaterials incorporated intheproject passed thegovernment standardspecificationfor highways and bridges andstrictly
comply withthescheduleofminimum testing requirements.
Checked pre-testing certificates ofpre-testedmaterials deliveredsuch as cement reinforcing steelbar, etc., ifnonetorecommend tothe
project engineer orhis assistantthesending ofsamples for necessary beforeallowing touse ofsuchmaterials.
Ascertain that theworks has been plannedandorganizedwith respect toquality control management.
Ensure the inspection and testing incompliancewith established quality assurance plan.
Ensure the compliance offinaldocumentationto beissued to the client.
Verify that the quality relatedactivities are inaccordancewith theapplicablecodes, specifications, andregulations.
Preparedaily and periodicalreports for project management information.
May 12, 1993 to June30 1996
Manifold Construction EnterprisesIncorporated
South Luzon Expressway Extension Project Package IA
Tanauan, Batangas, Pihilippines
MaterialsEngineer/Radiological and Safety officer
Duties andResponsibilities (As Materials Engineer)
Ascertained that allmaterials incorporated intheproject passed thegovernment standardspecificationfor highways and bridges andstrictly
comply withthescheduleofminimum testing requirements.
Performed field testing and controlconstructionmaterials to usein the project.
Conduct soilinvestigation andmaterials survey for probablesources ofmaterials, and reporting theapproximatequantity and availabilityof
materials andotherpertinent data.
Supervised mixing handling andplacing ofconcrete.
Preparedesign mixes for concreteand bituminous mixtures.
Evaluateconcrete samples every pouring operation and checked their slump.
Demonstrateby documented documents records,that the works has been carriedout andinspected torequiredquality.
Verify that the quality relatedactivities are inaccordancewith applicable codes, specifications, andregulations.
Ensure the inspection and testing arein compliancewith theestablishedquality assuranceplan.
Preparedaily/periodicalreports for project management information.
(as RadiologicalHealthand SafetyOfficer)
Served as licensee’s liaison officer withthe(PNRI) Philippines Nuclear
Research Institutes onlicensing matters.
Examine and determinecompetence ofpersonnel involved intheuse and handling ofradioactivematerials.
Establishedand conductedtraining program, for personnel involved intheusedand handling ofradioactive materials.
Developed andupdate operating and emergency procedures.
Handledand maintenanceofequipment,facilities and related equipment useto the radioactivematerials.
Conductedmonthly inventory,inspection andarea monitoring andmaintainedtheutilizing log.
Establishedand maintained licensee’s record keeping system relatedto the licensedradioactivematerials.
Ensured that radiationareas wereproperly securedand their location conspicuously indicatedby radiation sign.
Maintained controlofprocurementand disposal oflicensed materials.
Establishedand maintained storage facilities.
Assumed controland institutedcorrectiveactionduring emergencysituation.
Investigate the cause ofincidents anddetermined necessary preventiveactions.
Initiatednotification andreporting ofincidents to concernedauthorities.
September 15, 1990 to May 12, 1993
R.L Umali Construction Corporation
Lipacity-San Pablo Road Project
Laboratory Technician
Duties andResponsibilities
Obtainedsoil/materials samples fromthefield andperformed testing such as plastic and liquidlimit, gradation, proctor, CBR, Abrasionetc., to
check the suitabilityfor useas embankment filed materials, sub-basesub-grade,andbase coursematerials.

8. Evaluatesamples ofconcreteaggregates materials from batching plant andproject materials stock piles and checked their gradationand
blending requirements. Prepareconcretemix design computation priorto trial mixes.
Supervised mixing handling andplacing ofconcreteand checkedtheir slump.
Conduct field density test onprepared sections oftheroadso as to determine the degreeofcompaction.
Preparedaily/periodicalreports for theproject management information.
January 16, 1988to August 15 1990
Department ofPublic Worksand Highways, 2nd Pangasinan Engineering
District Tumana, RosalesPangasinan, Philippines
Engineering Aide.
Reports directly tothecivilworks supervisorfor specificjobassignment.
Conduct sitequality control inspection, coordination withsupervisors and monitoring ofprojectdevelopmentas per contract specifications.
Prepareplans andcorresponding survey returns data for verification andapproval based on field notes ofactual survey.
Preparedaily/periodicalreports for theproject management information.
Seminar/Training Attended
 IndustrialUses ofRadioIsotopes Course
Philippines NuclearResearchInstitute
Diliman, Quezon City
(April 05-30, 1993)
 Materials Testing Technology Seminar
U.P. Campus Diliman, Quezon City
(April 25-May06, 1994)
 Third World Manage andTechnical Seminar
U.P Campus Diliman,QuezonCity
August 20&27, 1994
 Seminar onConstructionMethod SupervisionandManagement
PICE, November 10, 1990
 Methods and Construction, Demonstration& TechniqueonInstallationofGeotextileAK BV, (Netherland) Sirajgonj, Bangladesh
January11,1997
PERSONAL INFORMATION:
Date of Birth December 14, 1962
Nationality Filipino
Education Bachelor of Sciencein CivilEngineering
FEATI University, 1986
Registration ProfessionalRegulation Commission(PRC) LicenseNo. 0057016
Address 14 Zamora Street, Sta.Lucia, Novaliches, Quezon City,Philippines
E-mail efrenmolina540@gmail.com
TelephoneNo. +974 668 04230
EFREN R. MOLINA