1. NARENDRA YADAV
Email Address: narendrayadav_2001@hotmail.com
narendrayadav_2001@yahoo.co.in
narendrayadav.1965@gmail.com
Employment History
SATORP (SAUDI ARAMCO TOTAL REFINERY AND PETROCHEMICAL) JUBAIL,
SAUDI ARABIA
Start Date April 2011 to UP TO DATE
Position / Title: Instrumentation Site Superintendent /PCS
Engineer
Responsibilities: Involved in FAT, Installation, Construction SAT, Pre- com,
Commissioning and start-up of
Invensys DCS, ESD, FGS, BMS, CCS,
MMS, ECS, OTS, SCADA, ALMS, CCTV,
Analysers And Field instrumentation
at CDU and VDU, Distillation and Hydro Treating Plants in
Saudi ARAMCO Total Refinery and Petrochemical Company
Jubail, Saudi Arabia. I was deputed for FAT (Factory
Acceptance Test) in Singapore from 15th
July, 2011 to
14th
May, 2012. Of Invensys DCS, ESD, MMS, PLC, CCTV
and Analyzers in Singapore Presently working as
Project Engineer in SATORP Close out Team and also
working in Coal handling Control Room for commission
of port project in package-8
During FAT Test checked and reviewed the followings:
The user equipments are according to the specification e.g.
HW & SW versions
The used equipments are installed according to
manufacturer’s specification
The input and output are connected according to the drawings

2. The calibrations of the equipments are correct
The trip points operate according to the requirement in SRS
The logic solver and associated software operate according to
the requirement in the SRS
The output and their actions behave according to the SRS
The reset functions operate according the SRS
The alarm, operator function, bypass, manual shutdown and
diagnostic function operates according the SRS
Reviewed project specifications, documents, drawings, data
Sheets & loop folder and identifying certifiable points
Related to electrical / instrumentation systems
During SAT (Site Acceptance Test) reviewed pre-
commissioning check list, pre-commissioning test sheet,
commissioning functional test sheets of analogue instrument,
installation and hook up drawings. I was involved in checking
the Control logics of ESD, F &G, MMS and BMS and dry out
test and punch closing.
Coordinating and the construction and commissioning
activities,
Supervising the completions field staff for the Instrumentation
Pre-Commissioning & commissioning activities and arranging
the Commissioning spares & consumables
Testing, pre-commissioning and commissioning the systems
as per project requirements and third party inspection / class /
Society agencies and signing off the systems
Interacting & coordinating with the client, vendors & other
departments and sub-contractors for the construction/completion.
Supervisory the Commissioning of Process Control System and
Field activities Reviewing ILD as built and instrument data sheets
Saudi ARAMCO (SMP) ABQAIQ and SHEDGUM GOSP3 Saudi Arabia
Start Date: October 2010 to April 2011
Position / Title: Superintendent Instrument and Control

3. Responsibilities/ Upgrade Control System ( DCS- 8 Nos.(PROVOX
CONTROLLER, SR-90) to Delta V DCS, ESD- 23 Nos
(Triconex). and BMS- 3 Nos. analyzer and field
Instrumentation under project BI-10-00394 World largest
Oil and Gas ABQAIQ Plants and replacement of Provox
Controller to Delta V control system in Shed gum GOSP3
under BI-0600 my main activities were EPC (Engineering,
Procurement, Construction, Pre-commissioning and
Commissioning) Abqaiq and Shed gum plants. I was
handling the meeting of PCS System such as Yokogawa
DCS, Invensys ESD and Bently Nevada VMS 3500 Series.
Achievements: Attended and achieved certificate s of HSE training
programmed conducted by Saudi Aramco Safety
department Abqaiq
Attended and achieved certificate of Project Management
training programmed at Abqaiq in Saudi Arabia which was
delivered by Vice President of Saudi Aramco:
• Responsible for delivery of fully commissioned
instrument systems including fire and gas PCS
and PSD systems.
• Provide HSE Leadership and work with the
contractor & vendor team to deliver fully on
Client’s expectations on HSE.
• Ensuring all Instrument commissioning personnel
carryout their work and are fully trained in
accordance with site PTW
Procedures
• Ensuring all instrument personnel are fully trained
and competent on the equipment and systems
being commissioned
• Perform Area Authority duties in accordance with
PTW procedure
• Witnessing and acceptance of site acceptance
tests.
• Compilation of relevant Commissioning Test
Procedures
• Responsible for implementing, execution and
completion of all discipline work-scopes detailed
within Commissioning Test Procedures

4. • Responsible for the safety & management of all
Instrument commissioning personnel and vendors
reps under their control when on-site
• Responsible for the management of all interfaces
between field equipment and Topsides
• Coordinating Vendor call offs in accordance with
construction and commissioning schedule
ensuring vendors are utilised fully when mobilised.
Qatar Petroleum through Consolidated Gulf Company Doha Qatar
Start Date: May 2010 - August 2010
Position / Title: Project Manager
Responsibilities/ Up-gradation of HV SCS SCADA (6 No’s) and installation
of new HV SCS SCADA 8 no’s & and also up gradation of
LV SCS SCADA (102), PMS and finally integration with
Telecommunication System in Qatar Petroleum
Achievements: Reviewed the design drawings and submitting to client
Qatar petroleum. Responsible for completion of scope
of work of HV and LV SCS SCADA work in Qatar
Petroleum and daily business was leading a team
who handled complete completion of scope of work
Attended H2S training programmed in June 2010, in
Doha Qatar:
• Reviewed site survey report, Control and operating
philosophy, Design of new Operator Console, Design
for engineering workstation desk, New and Old
room/Equipment room layout, List of effected
equipment requiring on relocating, Technical
specification for HMI interface for all instrument and
control sub system, Hardware/Software specification,
Specification of interface and changes to the DIC
system, Server specification, System architecture
design, Specification for the design of HMI graphics
alarm and functionality, Sub system architecture
interface diagram Specification and design of operator
or/maintenance override, Preliminary instrument
cable routing, Fiber and copper cable
specification, Cable block diagram.

5. • Update existing drawing whenever required vendor
manuals, Preparation and submission of Design basis
memorandum.
• Design for installation of new SCS and PMS Interface
all existing new SCS with the new SCADA PMS.
• Coordinating meeting with Qatar Petroleum and
Contractor NECON Engineering Kuwait and resolving
the technical issue for LV and HV SCS SCADA
System.
• Maintained HSE and ISO-9001.
Saudia Aramco (PMC) through Foster wheeler and Sofcon Engineering
Consulting Saudi Arabia
Start Date: August 2008 - December 2009
Position / Title: Superintendent Instrumentation and Control
• Responsibilities/ Responsibilities for completion of KHURAIS Crude
Contract (Mega Project), KHURAIS, Riyadh K.S.A
($ 10 Billion U.S Dollar Project Cost), Saudi
Aramco Contract No.715200 (IK)
Achievements: Completed the Construction, pre Commissioning and
Commissioning of KHURAIS Oil and Gas Project.
Received appreciation certificate by Saudi Aramco
Management through proper handling the team of
engineers, contractor, sub contractor and pre
commissioning team:
Safety Certificates awarded by Snamprogetti Italy for
Successfully completion of Khurais Oil and Gas
Project.World second largest Excellent Project completion
Certificates awarded by SNAMPROGETTI Italy and
Saudi Aramco for Khurais Oil and Gas Project in 2009
• Coordinate with clients & Ccontractors
• Highlighted major concerns to the Client SAUDI
ARAMCO and Contractor SNAMPROGETTI

6. ITALY/SAIPEM during installation of all types of
field instruments and connection of impulse line,
Pneumatic tubing for Control valves and air line for
instrument as per project Hook-up, P & ID and
Isometric drawings.
• Preparation of stanchion and other supports related to
instruments. Primary, Secondary cable tray, Conduit
installation and Cable pulling as per drawings.
• Monitored the progress of the project as per the project
plan and against the client requirements and corrective
action whenever required
• Delegate and highlight specific task to the pre
commissioning team
• Organized pre-commissioning activities and submit
progress report.
• Carried out full supervision on Instrument pre-
commissioning, Commissioning activity at (GOSP’s
plant)
• Instrument Calibration, Equipment Installation and
Progress monitoring
• Insuring compliance with ARAMCO standards on a
daily basis as per safety awareness
• Liaise closely with the EPC-Contractor and Vendors,
resolving all on site issue and contractual problems.
• Inspect construction through completion and verify
QA/QC documentation.
• Delegate on day-to-day detailed technical / quality
aspects on instrument work fronts
• Assessed resource requirements and dealt with in field
construction problems.
• Highlights weekly work schedules and ensured the
progress achievement of set targets.
• Ensured construction adherence to drawings, project
specifications and relevant standard Delegate
multinational workforce on the harmonious basis as a
team

7. • Carried out supervision on construction, system
installation, and erection, instrument fitting installation
including instrument support, inspection, and shop
fabrication
• Planning, monitoring and coordination of project
progress
• Work plan and maintenance schedule coordination,
time, cost, quality, human resources and procurement
management.
• Co-ordination to ensure smooth transition to DCS with
adequate training for the operations and maintenance
staff
• Efficiency & creativity in developing solutions to fulfill
the work schedule, specifications and project budget.
• Good interpersonal skills, leadership qualities and
ability to adapt to a new environment.
• Installation of airlines of all types of control valves for
pneumatic pressure. Marshalling cabinet’s erection,
Cable termination in Marshalling cabinets and JB'S
Expedite the loop checking work of all types of closed
loops as well as open loops,
• Installation, Pre-Commissioning and
Commissioning of Yokogawa DCS CS-Centum-3000
Field Bus System and Triconex Emergency
Shutdown System (ESD), Fire Alarm System of
Allen Bradley Micro logics 1200 and interfacing
from GOSP1, GOSP2, GOSP3, GOSP4, Inlet Outlet
Evaporation Pond to CCR (Central Control
System).
• Resolved problems during loop checks, functional
check and PCS Commissioning.
• Installation and functional test of Motor Operated
Valve (251 nos.) ZV’S (165 NOS), Flame Sensors,
Analyzer (700 NOS. H2S and LEL), Analyzer
houses, Vibration element and Transmitters,
Vibration Monitoring System (Bentley Nevada 3500)
and paging system.
• Leak test for impulse tubing for all kinds of
Transmitters and Emergency Shutdown Valve.

8. •
Main Contractor BECHTEL Overseas Inc. Sub. Contractor BEMCO
Contracting company Doha Qatar
Start Date: May 2006 - March 2008
Position / Title: Instrumentation and Control Manager
Responsibilities/ Completion of EPC (Engineering Procurement and
Construction) of Utility Project in New Doha International
Airport, Qatar
Achievements: Leading Engineers, supervisor, Technicians Team (5x
Engineers, 2x Field Supervisor and 10 Technicians)
Certificate of Achievement from Overseas BECHTEL
Inc. in QATAR for recognition of the successful completion
of the NDIA Supervisor's Training Course in 2006
• Reviewed and highlighted the detailed design drawing
during the stage completion of 30%, 60% and final
100% as built drawings.
• Responsible and accountable for all functions
performed by the instrumentation and control group.
• Assemble and supervise an Instrumentation
Engineering group capable of executing a project.
• Create technical design instructions and discipline
work practices.
• Ensure a safe, efficient plant design developed to
comply with agreed project standards
Provide technical guidance to engineers.
• Develop man-hour estimates, review with engineering
management for approval and submission to the
Project.
• Initiate the development of and approve project specific
work methods, standards and specifications to ensure
quality control is maintained.
• Provide training and mentoring as and when required.
• Maintain up to date technical knowledge to ensure
appropriate input into designs and most cost effective
design technique.
• Experience in the Design, Detailed Engineering
Preparation of Specifications.
• Reviews P&ID's, vendor, and engineering documents.
• Evaluation of existing EI&C design information

9. • Evaluation of supply chain for instrumentation
• Revision of instrument specifications as per Standards
• Evaluation of supply chain for control system detailed
design & supply
• Interfaces with the commissioning department,
construction, client, home office, and vendors in
support of commissioning and testing activities.
• Development of Control System User Requirement
Specifications & Functional Descriptions where
necessary.
• Assists with the implementation of testing
program.
• Highlighted, Reviewed, commented major concerns
and coordinated with Consultation Worley Parson
(Australian Company) Doha Qatar and vendor for
completion of BMS (Building Management System)
System, FAS (Fire Alarm System), TDS, Power
Monitoring SCADA System and field instrumentation
for Utility project of New Doha International Air Port.
• Involved in checking technical compliance on site to
project specifications and standards, system
integration/Communication of BMS DDC, Fire
Alarm System Edward Canada, SCADA Power
Monitoring System to Central Airport System and
reviewed Commissioning functional test procedure.
• Coordinating weekly review meeting with consultant
and procurement department, highlighted major
concern and resolved to immediate complete during
installation of cable tray, cable conduit, signal cable
interfacing cable power cable and instruments.
• Follow up with clients on approvals and instructions,
attend client meetings and liaise with client on all issues
of the project deliverables.
• Monitor and review the receipt of vendor deliverables
including compliance with vendor
• Specifications and ensure that all equipment is
delivered within the procurement plan.
• Participate in the project activity report preparation and
verify all data to ensure that it is accurate and
accurately reflects the status of the project.
• Ensure the availability of necessary resources for the
smooth execution of the project.

10. Al-Meer Technical Services for Kuwait National Petroleum Company, Kuwait
Start Date: April 2006 - May 2006
Position / Title: Lead Instrumentation Engineer
Responsibilities/ Modernization of Obsolete Instrumentation items in Kuwait
National Petroleum Company
Achievements: Technical revision of drawings, Old and new instrument
list.
Attended Training Program for BMS, CCTV, ACCESS Control
System and Fire Alarm System in KUWAIT on 28TH
May 2006.
• Involved in
Modernization of Obsolete Instrumentation (MOIP)
Project Phase-1 of Old Refinery at Mina AL-
Ahmadi Refinery of KNPC, Kuwait. As EPC
Contractor scope involves replacement of old
conventional Control system (pneumatic & non-
smart field instruments and controller) Relay
based logic system by Latest Art-technology
DCS/ESD/PLC (FOXBROW, Delta-V, and
Honeywell) System and involves Centralized
control of all Old refinery Units and shifting
control/operation of all units from New Oil &
Movement Central Control Room ( New OM-CCR)
and maintaining the individual Local area C/R as
Satellite Rack Houses(For fall back arrangement)
and RMP CCR modernization (partly) Various
areas/systems to be modernized and controlled
thru individual workstations of New OM-CCR are
as below Technical clarification of quotes with
engineering & factory
• Product Loading Area (Sea Export/Ship Loading)
• Product Loading Area (Land Loading)
• Product Blending & washer Area
• Bitumen & Eocene area
• RMP Workstation#2, 3, 4 & 5 & Utility Control
Room (UCR)

11. M/S. SWIL (JHAGADIA) COPPER LIMITED, GHAJADIA, DISTRICT BHARUCH
STATE GUJARAT, COUNTRY INDIA,
Start Date: October 2000 –April 2006
Position / Title: Deputy Manager Instrumentation and Control for
Kaldo, Convertor, Anode Furnace, Anode Cast wheel,
Refinery, Utility and Captive Power Plant (16 MW)
Responsibilities/ Engineering Procurement, Construction and Maintenance
of Kaldo, Convertor, Anode Furnace, Anode Cast wheel,
Refinery, Utility and Captive Power Plant (16 MW)
Achievements: Construction, Pre-commissioning and Commissioning of
Plants and Achieved the reward from Chairman Mr.
Narshima Murthi for before completion of Refinery Plants.
Certificate of Competition of SLC-500 Programming trainee using
RSLogix-500 at Delhi, INDIA in 2003
Certificate from GUJARAT SAFETY COUNCIL (INDIA) for
Fire Safety Management Workshop
• Responsible for review, design, specification, and
services related to Instrumentation and Control systems
including DCS, PLC, SCADA, Fire and Gas,
control, cabling and wiring, motor control centers,
communications systems and instrument
installations.
• Successfully completed the FAT/IFAT of ABB and
MAPL and Delta-V DCS
• Evaluate, select, and apply standard engineering
techniques, procedures, and criteria, using judgment in
making minor adaptations and modifications
• Assist in the design of larger and more complex
assignments which involve conventional types of plans,
investigations and surveys with relatively few complex
features for which there are precedents
• Prepare plans, specifications, and estimates, and
contract documents. Resolve engineering issues and
develop work break down structures.
• Analyze data and perform calculations.

12. • Evaluate subcontractor bid scope (technical
evaluations) and work with outside engineering firms to
develop designs.
• Perform site inspections, and support construction in
the field, as well as from the home office.
• Experience in creation of detailed specifications of field
instruments, final control elements and various types of
control and logic systems like DCS, PLC etc.
• Involved with Technical review of Instrumentation
Design and detailed engineering of Kaldo Furnace,
Anode furnace, Anode Cast-wheel, Refinery and Utility
Plant.
• P&ID development and control scheme design, alarm
management / philosophies, Trip & Alarm schedule
generation, C&E generation, control narratives
generation, HAZOP attendance.
• Responsible for technical queries from various areas of
the site & was creating and reviewed test procedures.
• Reviewed technical documentation, compliance and
systems integration.
Involved SAT, Pre Commissioning and Commissioning
activities ,technical queries from Construction &
Commissioning teams, interrupt schedule technical
review and test planning.
• Creation and review commissioning functional test
procedure and alarm classification exercise.
• Reviewed Contractor technical documentation,
• Checked technical compliance of project specifications
and standards.
• System integration/Communication from Siemens
SIMATIC S5 PLC, Allen Bradley PLC and GE-
Fanuc to DCS ABB/MAPL/Honeywell and reviewed
Commissioning functional test procedure.

13. • Delegate on day-to-day detailed technical / quality
aspects on instrument work fronts, assessed resource
requirements and dealt with in field construction
problems.
• Highlight weekly work schedule and ensure the
progress achievement of set targets.
• Ensured construction adherence to drawing, Project
specifications and relevant standard.
• Delegate multinational workforce on the harmonious
bass as a team.
• Supervision of construction, system installation, and
erection.
• Instrument fitting installation including instrument
support, inspection, and shop fabrication.
• Planning, monitoring and coordination of project
progress.
• Installation of all types of field instruments and
connection of impulse line, Pneumatic tubing for
Control valves and air line for instrument as per project
Hook-up, P & ID and Isometric drawings.
• Preparation of stanchion and other supports related to
instruments.
• Primary, Secondary cable tray, Conduit installation and
Cable pulling as per drawings.
• Leak test for impulse tubing for all kinds of
Transmitters.
• Installation of airlines of all types of control valves for
pneumatic pressure.
• Marshalling cabinet’s erection, Cable termination in
Marshalling cabinets and JB'S.
• Expedite the loop checking work of all types of closed
loops as well as open loops.
• Involved in detailed engineering and the management /
supervision of other engineers.

14. •
• Perform engineering of project assigned and
ensure all technical design / requirements conform
to contract specification and industry standards
•Responsible for all aspects of engineering
activities for tasks assigned, from conceptual
design to documentation generation.
•Ensure that design and implementation of
engineering tasks assigned meets customer
specification and standard engineering practice.
•Participate in system integration and internal test,
and customer acceptance test.
•Support project manager on all technical /
commercial aspects
•Ensuring customer satisfaction through direct
liaison with client representatives, customers and
service recipients
•Perform system installation supervision, system
power up, site acceptance test and other site
support activities
•Ensuring delivery of value to customers
•Compliance with Company HSE, Quality and
Operation policy.
• Troubleshooting maintenance of Siemens SIMATIC
S5 PLCS, Allen Bradley data liner DL-20, Allen
Bradley Micro logics 1200, Allen PLC Bradley
SLC500, Honeywell PLC, GE-FANUC PLC, DCS
ABB Advent OCS Controller 420, Station 500 series,
MAPL DCS , wander wall SCADA system, CCTV
and fields instrumentation.
Grasim Industries Limited (Asia Number one Plants in Fibre Group) Birla Gram
Nagda, Ujjain, M.P. India.

15. Start Date: March 1992 –October 2000
Position / Title: From Training Engineer to Senior Engineer
Responsibilities/ Installation and Commissioning of Siemens Simatic S7
PLC and Modification, troubleshooting of PLC, DCS,
analysers and field instrumentation
Achievements: Certificate from President of M/S. GRASIM
INDUSTRIES LTD. INDIA for promoting Safety
conscious movement and contribution towards
improved plant working in 1995
Attended Training Program of ISO 9001 and 14001 in
Grasim Industries Limited Birla gram Nagda
Attended Training Program of Cost Control through
Effective Implement production repairs
Maintenance Management System
By CII (Confederation of Indian Industries) at Bhopal
in India in 1997
Certificate of Computer Awareness from M/S. Grasim
Industries Limited in 2000
• Monitor daily/weekly repairs.
• Deliver cost and value targets
• Complete variations efficiently and accurately to
prevent billing delays
• Communicate specifications and quality standards
• Deal efficiently with problems and avoid dispute
• Responsible for the planned and reactive maintenance
on the array of automated equipment which includes
various processing, weighing and packaging machinery.
• Crucial member of a strong and established team
• Supervision are carried out in strict compliance with:
• The site H.S.E. requirements.
• The quality, technical, financial and schedule
requirements of the subcontracts.
• Sound engineering practices.
• Supervise the team of engineers

16. • Building maintenance/ technical knowledge
• Knowledge of Health & Safety legislation
• Extensive knowledge of process systems and awareness
of operational requirements.
• Installation Commissioning and maintenance of
Siemens PLC and YOKOGAWA DCS.
• Maintenance equipment & preventive maintenance
records.
• Knowledge and experience about rotating machinery
(compressors) instrumentation like anti surge control,
PLC.
• Conducting regular inspection and tests to ensure the
performance capacity of various instruments and
accessories.
• Proactively identifying areas of obstruction/breakdowns
and take measures to rectify the equipments through
application of trouble shooting tools.
• Responsible for the technological upgrading of the
obsolete Instrument Infrastructure
• Executing cost saving
• Guiding and monitoring teams to bring out their skills
• Responsible for carrying out plant maintenance
activities which includes, develop preventive/predictive
maintenance.
• Plan in coordination with operational team and ensure
timely implementation of the plan.
Compliance to legal and statutory provisions.
• Ensure engineering contractor to deliver the quality
jobs
• Responsible for liaising with government officials (e.g.
factory inspector, weight and measures inspectors and
other regulatory authorities) on various statutory and
administrative matters.
• Responsible for conceptualization, design and
execution of projects & modifications.
• Calibration and Troubleshooting of various type of
process control instrument such as Mass Flow

17. • meter, Magnetic Flow meter, Vortex Flow meter,
Ultrasonic Transmitter, Conductivity meter, PH
Transmitter, Differential Pressure Transmitter, Level
Transmitter, Level Gauge, Level Switch, Digital
Weighing Balance, Flow computer, Electronics
Weighing Machine, Weigh Bridge, and Railway Weigh
Bridge, Motorized valve, Encoder, Recorder, Vibration
Transmitter, Vibration Sensor, Smart Transmitter,
Control valves, On off valves, Capacitance type level
Transmitter
• Responsible for the planned and Preventive
maintenance on the array of automated equipment
which includes various processing, weighing and
packaging machinery
• Instrument troubleshooting maintenance of VISCOSE
Plant, AUXILIRAY Plant, SPINNING Plant, H2SO4
Plant and 40 MW thermal Power Plant.
• Responsible to maintain ISO 9000, ISO 14000, World
Class Manufacturing System.
Education / Qualifications
• B.Sc. (Bachelor of Science) Honours from Bhagalpur
University Bhagalpur, Bihar, India in 1986
• AMIE (Associate Members of Institution of Engineers-
India) in Electronics and Communication
Engineering in 1991
• M.S. in Electronics and Control Engineering from
Birla Institute (Premier Institute of India) of Technology
and Science Pilani Rajasthan, India in 1998
• Diploma in computer Software in 1990 from EIKO
Computer Madras (Chennai), India
• Diploma in Computer Hardware 1991 from SIS Gundy
Madras, India
Skill Summary:
• Very good communication and managerial skills
• Strong Technical knowledge
• Strong Knowledge of Team Work
• Maintenance Management/Engineering
Procurement and Construction of Various PLC,
DCS, SCADA, BMS, VMS, MMS, DDC, Fire Alarm
System, CCTV, Access Control, Integration with
other systems and various fields Instrument

18. • Knowledge of lathe machines, milling machines,
boring machines, drilling machines, hobbing
machines, planner machines, disc end and wood
cutting machines etc.