Detailed Resume of Jimmy Bernal

1. Jimmy C. Bernal
Email Add: jimbern_15@yahoo.com.ph & jbernal@megawide.com.ph
HOME Philippine PLDT Landline no: +63437848140
Philippine Mobile : +639175048568 & +639953185767
Passport No. : EC1788219
Professional Qualifications & Personal Information
● Present Position : Maintenance Manager
● Previous Position : Maintenance Manager / Asst. Maintenance Manager
● Previous Position : Sr. Plant Electrical / Maintenance Engineer / Asst. Manager
● Degree/Education : Graduated of Bachelor of Science in Electrical Engineering
( year 1984 – 1990 ) 5 years course
● Expertise :
1) Manage a Maintenance Department.
2) Familiar with Maintenance Approaches.
3) Familiar with Maintenance Indicators.
4) Manage a Team of Technicians.
5) Spare Parts Management.
6) 5S Oriented and Familiar with Implementation as member of the committee.
7) Troubleshoot and Investigate electrical equipment failure or efficiently problems.
8) Preparing/Revising Maintenance Procedures.
9) Planning and Implementing Maintenance Management.
10) International Standard Operation for Maintenance Dept.
11) Electrical & Mechanical works troubleshooting.
12) PLC & Electrical Controls.
13) Electrical Design and Construction.
14) Pump and Motor’s & Motor Controls and VFD.
15) Preparation & Implementation of Preventive Maintenance Plan.
16) Electrical & Mechanical Safety Oriented.
17) Operation & Maintenance of Generator’s.
18) Test & Commissioning.
19) Analyzing Data.
20) Maintenance Staff Appraisal and Evaluation.

2. ● Years of Experience : 26 years (Hands-On Solid Experience)
1) Strong Leadership & Decision Making.
2) Maintain, troubleshoot, repair and upgrading of the terminal
electrical and mechanical equipment.
3) Design and Electrical construction.
4) Manage a Quality Maintenance Management System involving
maintenance procedures , planning , organizing ,
implementation and routine monitoring.
● Affiliations : Associate Member, Institute of Integrated Electrical Engineers
- ERCSA (Saudi Arabia) , membership no: 12ERCSA-ASSO-008
Professional Regulation Commission License no. RME0013252
( Government Licensing Agency for Professional , Philippines )
Training / Seminars Attended :
√ Residential, Commercial, Industrial Electrical Design and Construction (Yr-1989)
√ High Rise Building Electrical Design (Yr-1989)
√ Modern Transmission, Distribution Designs & Protection Schemes (Yr-1989)
√ Philippine Electrical Code (Yr-1991)
√ Basic Safety Course (Yr-1998)
√ Improving the Operation & Maintenance of Boiler (Yr-1999)
√ Compressor Technology (Yr-2002)
√ Pneumatic Technology (Yr-2004)
√ Fire Prevention & Disaster Seminar (Yr-2004)
√ Industrial Laboratory Water Analysis (Yr-2005)
√ Industrial Wastewater Treatment (Yr-2007)
√ Integrated Management System – Master Class (Yr-2010)
√ KPC Integrated Management System (Yr-2011)
√ Programming Procedures of Programmable Logic Controllers and Testing & Operating
an Automatic / Manual Transfer Switch (Yr-2012)
√ Programmable Logic Controller-System Integration/Variable Frequency Drive Testing
and Commissioning (Yr-2012)
√ Sizing of Capacitor Bank, Short Circuit Calculation, Smart Energy Solution, Lighting
System & Retrofitting, Cable Tray, Bus Bar Trunk (Yr-2012)
√ Indoor Lighting Design using DIALux, Fire Alarm System, Basic Principles of High Voltage Direct
Current (HVDC) Transmission & Electrical Safety for Construction
√ Technical Writing (October 2016)
√ Reliability – Centered Maintenance (November 2016)

3. • Age : 50 years old
● Date of Birth : June 16, 1967
• Nationality : Filipino
• E-Mail Address : jimberm_15@yahoo.com.ph &
jbernal@megawide.com.ph
• Special Skills : Computer literate, Driving, Auto-Cad
• Philippine Mobile : +639953185767 & +639175048568
• Home Tel (Philippines) : +63437848140
● Passport No. : EC1788219
Professional & Work Experience
Maintenance Manager Megawide Precast Factory under Megawide Construction
( April ’16 – Present ) Corporation, MCC (Construction)
Brgy. San Juan , Taytay Rizal , Philippines
Duties and Responsibilities:
√ - Managing the precast factory maintenance department and its machineries /
equipment, and different function of the department.
√ - Implementing Maintenance System & Strategy for machine /equipment such as:
1) Ebawe Carousel System (Pallete) with 8 units of Side Shifting units,Pallete Stacker,Levelling
Machine / Helicopter,Curing Chamber & Plotter Robot, Ebawe Train, Titling Table etc.
2) Shuttering Robot
3) Shuttering Cleaning Machine
4) VGA Lattice Girder Robot
5) Wire Mesh Robot
6) IMER-ORU Batching Plant system
7) IMER-ORU Flying Concrete Bucket
8) Demag Overhead Cranes & Gantry Cranes
9) Elematic Battery Mould
10) Elematic Pulling Wagons
11) Elematic Concrete Bucket
12) Station Hooper for Flying Bucket
13) Etc..

4. Maintenance Manager Gulf & Safa Daries Co. LLC Dubai under National Food Products
( August ’15 – March ‘16 ) Company (NFPC), Dubai, UAE – PO Box 61130
Certified by HACCP & Dubai Municipality@Food Control Div.
Duties and Responsibilities:
√ - Responsible to the managing and controlling of many different functions of the
Maintenance Department and personnel.
√ - Dealing with expansion projects of the factory.
√ - Implementation of maintenance system & strategy for the following equipments
such as :
1) Air Compressor Units – 4 units @ Atlas Copco
2) Boiler Unit – 3 units
3) Chiller Unit – 8 units (4 York , 2 Carrier & 2 ammonia)
4) Water Treatment Plant – 1 unit
5) Wastewater Treatment Plant – 1 unit
6) Cold Store Unit – 3 units with 10 units compressor
6) Ink Jet Printers – 16 units (Hitachi & Videojet)
7) Delmax Cup Filling Machine – 4 units (sizes: 73mm-2units, 95mm-1unit & 115mm-1
unit)
8) Delmax Bottle Filler – 2 units (PET & HDPE type)
9) Challenger Cup Filler – 3 units (73mm-2 units & 95mm-1 unit)
10)SealPack 73mm Cup Filler – 1 unit
11)Gable Top Filler NL8 – 3 units
12)Clearpack Shrink Wrap Machine – 6 units
13)Polypack Shrink Wrap Machine – 1 unit
14)Self Adhesive Labelling Machine – 1 unit
15)Bottle Unscrambler – 1 unit
16)CIP System Unit – 2 units (auto & manual)
17)HTST Pasteurizer 15000 LPH – 1 unit
18)HTST Pasteurizer 6000 LPH – 1 unit
19)HTST Water Pasteurizer – 1 unit
20)Plate Heat Exchanger – 4 units
21)Planetary Dough Mixer – 1 unit
22)Homogeniser Unit – 3 units (500, 6000 & 15000 LPH)
23)Tanks/Agitator – 31 units
24)TETRA TBA/8 1000ml S with accessories line – 1 unit
25)TETRA TBA/19 200ml S with accessories line – 2 units
26)TETRA A3 Flex 1000ml S with accessories line – 1 unit

5. Acting Maintenance Manager National Ready-Mix Concrete Company (Construction)
(May ’15 – August ’15) Lootah Group - PO Box 10631 Dubai, United Arab Emirates
Sr. Maintenance Engineer Certified ISO 9001
(Oct ‘ 14 – May ‘15)
Duties and Responsibilities:
√- Acting Maintenance Manager due to resignation of the Manager and act to the
full capacity of over-all function of the Maintenance Department.
√ - Assisting the Maintenance Manager in his full capacity as Maintenance Manager
of 15 Batching Plants for Ready-Mix Concrete Factories in United Arab Emirates.
√ - Initiates and develops maintenance strategies for all plants and equipment, and
ensure effective implementation of these strategies.
√ - Prepares and issues maintenance plan, policies and strategies.
√ - Responsible for the managing, overseeing, supervising, and inspection /
monitoring of maintenance personnel in their task of work with regards to the electromechanical
construction / modification, engineering works, planned preventive maintenance, routine
monitoring, & troubleshooting of machine & equipment within of all its branches in United Arab
Emirates.
√ - Perform related function such as prepare requisition, evaluation of quotation,
engineering analysis, deal / troubleshoot problems of equipment / machine as the need arises,
recommendation for improvement and training / evaluation of maintenance personnel.
Engineering and Maintenance Head Essential Fruits Incorporated
(July ’14 – October ‘14) ( Fruits and Beverages Processing Plant )
KM. 82 Brgy. Malatgao, Narra , Palawan, Philippines
Duties and Responsibilities:
√ - To perform full capacity as Head of Engineering and Maintenance Dept.
√ - Overseeing and monitoring the work of maintenance personnel with regards to
Engineering and Planned Preventive Maintenance.
√ - Prepare, Manage and Assign Quality Maintenance Management System involving
maintenance procedure, reports, checklist, word orders, breakdown analysis, suggest
modifications and revision for improvement, equipment history records and keeping all the
maintenance records.
√ - Perform requisition and purchasing works of needed spare parts and consumable
spare with proper evaluation of the recommended spare parts by the supplier.

6. √ - Providing training with the maintenance staff and do appraisal of their
performance.
√ - To deal / troubleshoot , and diagnose emergency breakdown as they occur with
regards to PLC hardware / controls, mechanical / electrical problem of the machine & equipment
wherein my subordinates cannot solve the problem as needed.
Asst. Maintenance Manager Al Kifah Precast Concrete Company ( Construction )
( August ’12 – Feb. ’14 ) PO Box 30789, Akrabiya Al Khobar 31952, Saudi Arabia
Sr. Plant Electrical/Maintenance Abqaiq Road, New 2nd
Industrial City, Dammam
Engineer ( August ’08 – Aug ‘12 ) Certified ISO 9001-2008, ISO 14001-2004, OHSAS 18001-2007
Duties and Responsibilities:
√ - Assisting the Maintenance Manager with his over-all function in the Maintenance
Department.
√- Involves in electrical design & construction of the plant (5 Megawatts) as “Hands-
On” Electrical Engineer.
√ - Reports directly to the superior any matters regarding or concerning
maintenance revision & problem matters.
√ - Responsible for planning and overseeing the maintenance team activities to
ensure safe and efficient operations of the facility and keeping maintenance records.
√ - Work as resident plant electrical engineer with minimum supervision on a variety
of complex engineering functions.
√ - Lead and recommend new continuous improvement solutions for installations or
modifications to improve existing facilities and standardization within specific fields of
endeavor.
√ - Perform engineering analysis and develop recommendations and alternatives in
the solution of complex problems related to the plants electrical and control system.
√ - Work on the electrical engineering aspects and produce full design packages for
the required plant modifications.
√ - Prepare and plan routine maintenance schedules and reports.
√ -Assign preventive and corrective maintenance jobs as per the direction of
Maintenance Manager.
√ - Supervises and coordinates activities of maintenance staff.
√ - Make periodic inspection of equipment and system to observe operating
condition in actual or thru monitoring checklist of equipment and need for repair & adjustment.
√ - Keep maintenance records, prepares reports and composes correspondence
related to work.
√ - Executes work order through Maintenance Management System and
coordinates with maintenance supervisor / foremen for job completion and technical matters.
√ - Maintain such communications and relations as are necessary to report on the
status of matters requiring action and to ensure that corrective action is undertaken.

7. √ - Helps Maintenance Manager in executing corrective and planned maintenance
with due regard to schedule maintenance plan.
√ - To perform technical evaluation of quotation received from purchased
department and recommend appropriate choice.
√ - Plans and controls expenditures in accordance with the operating budget of the
department.
√ - To prepare purchase requisitions for spare parts and consumables ensuring
budgetary constraints and arrange strategic spares availability to cope up with the maintenance
requirements.
√ - Review and recommend new maintenance procedures and work instructions.
√ - Supervise, direct and co-ordinate the activities of all personnel to his area.
√ - Ensure environment aspect – impact and hazard risk assessment are carried out,
controlled & updated.
√ - Implement, monitor and report IMS (Integrated Management System) objectives,
targets and programs.
√ - Provide necessary resources for effective implementation and sustenance of IMS
(Integrated Management System) and report performance to the management periodically.
√ - Ensure identification of root cause for the identified non-
conformances/deviations in IMS (Integrated Management System) and to implement corrective
actions/preventive actions.
√ - Identify the competency gap for their subordinate personnel and carry out
annual performance evaluation of reporting employees.
√ - Provide training to new employees and evaluate their performance.
√- To deal & diagnose emergency breakdown as they occur for equipments &
machines such as :
1 ) Elematic precast concrete machineries
5 units - Steel Wire Pulling Device ( EN 875 ,)
3 units - Saw Machine ( EL 1300 )
2 units - Extruder Machine ( EL 900E )
1 unit - Stressing Device
2 units - Cleaning Machine ( EL 400 )
7 units - Shuttle Concrete Machine ( EB 405 )
2 units - Lifting Beam ( 2 X 5T ) ( EN 886/16 )
1 unit - Maturity Control System (EL 490 )
5 units - Portable Concrete Shute 5.4T, 380 volt
5 units - Intermediate Hopper EB 120
2 units – Concrete Shuttle Bucket Gantry
2 units - Bed Master Machine
2 ) Ebawe precast concrete machineries
1 unit - Central Shifting Machine
2 units - Concrete Distributor Machine
2 units - Tilting Table
2 units – Side Shifting units
2 units – Compacting devices

8. 3 ) Boiler – Make: Viesman, 80 HP – 1 unit
4 ) Stressing Jack ( CCL ) – for pre-stress beam – 1 unit
5 ) Kone Overhead Crane – 20 units
6 ) 1020 KVA Cummins Generator – 4 units
7 ) 456 KVA Caterpillar Generator – 1 unit
8 ) Synchronizing Panel & Main Distribution Panels
9 ) Batching Plant 1 – one mixer ( 37 KW )
10) Batching Plant 2 - two mixer ( 2 x 37 KW )
11) Aggregates Washing Plant no. 1
12) Ice Batcher no. 1 & 2
13) Desalination Plant
a) Sedimentation Tank – 2 tank
b) Domestic Tank – 2 tank
c) Sweet Water Tank – 1 tank
d) R.O. Treatment – 200 cu. mtr. capacity
e) Domestic Pump (2) with one jockey pump
f) Fire Fighting Pump (2)
g) Sweet Water Pump (2) with one jockey pump
14) Chiller Plant with 2 units compressor & one chilled
Sweet water tank with 2 units pump.
15) Air Compressor Unit
a) 4 units Sullar air compressor , 10 bar
b) 1 unit Ingressor Rand , 10 bar
c) 1 unit Atlas air compressor , 8 bar
d) 3 units Champion Piston Type (big)
e) 5 units Champion Piston Type (small)
16) Air Conditioning Units
a) Split Type – 60 units
b) Window Type – 140 units
17) Heavy Duty Miller Welding Machine , 380 ac volt,
63 amp. Max - 36 units & 2 units Heavy Duty MIG
18) Mobile Crane
3 units – Groove 70T (one) & Groove 80T (two)
3 units - Tadano 70T (two) & Tadano 80T (one)
1 unit – Liebherr 130T
19) Haulotte Manlifter , 360 degrees turn (articulation)
20) Genie Manlifter, boom type
21) Wheeloader , 1 unit – Brand: Kawasaki
22) Truck Mixer – 1 unit
23) Forklift (Toyota) – 1 unit
24) Bar Cutting Machine (3 units) & Bar Bending
Machine (4 units )
25) Vibrator / Inverter Machine , 3 phase, 380 V. -3 units
26) Sheering Machine , 380 volts , 3 phase – 1 unit
27) Bending Machine , 380 volts , 3 phase – 1 unit

9. 28) Lathe Machine , 380 volts , 3 phase – 1 unit
√ - In- charge for Workshop operation and Vehicle maintenance & repair.
√ - To carry out any other duty assigned to by the management from time to time
and perform related duties as required such as :
1) Assisting the Design Department for the electrical matter of the project and
act as the Consultant for the electrical plan.
2) Assisting the QA / QC Department for the electrical matter of the project
and act as Consultant for the electrical plan.
3) Planning and Scheduling of Building maintenance and repair for office,
accommodation and auxiliary building.
Utility Control Captain / Yakult Philippines Incorporated ( Food & Beverages Manufacturing )
Facilities Engineer Bo. Makiling , Calamba , Laguna , Philippines
( Aug. ’98 – July ‘ 08 ) Certified ISO 9001, 14001,OHSAS 18001 & HACCP
Duties and Responsibilities:
√ - To restore and retain plant equipment, to ensure the safely, availability and reliability
of the plant and equipment through well-design system categorized as routine,
preventive and predictive maintenance along their life cycle.
√ - Supervision & Preparation of activities for Engineering Staffs
√ - Supervision of Building Maintenance and repair by Staffs
√ - Supervision of Operation and Maintenance & Troubleshooting of Facility Machineries
such as :
● Substation & Switchgear room
1) Transformer 2000 KVA
2) 2000 KVA Caterpillar Generator
3) 500 KVA Caterpillar Generator
4) Capacitor Cells ( for unity power factor )
5) Main Distribution Panelboards
● Intake & Exhaust Systems
● Airconditioning Units
1) 4 units Centralized Type
2) 15 units Split Type
3) 10 units Window Type
● Air compressor systems

10. 1) 2 units Atlas , 11 kw
2) 1 units Atlas , 22 kw
3) 2 units Atlas , 44 kw
4) 4 units Atlas Air Dryer
● Water Treatment Facilities
1) 2 tank- Sedimentation Tank
2) 2 units- Deepwell pump
3) 2 units- Sand Filter
4) 2 tank- Cistern Tank
5) 2 units- Chlorine Dosing pump
6) 1 unit- Chlorine Analyzer
7) 1 tank- Accumulator Tank
8) 1 tank- Hydro-pneumatic Tank
9) 2 units- Softener Tank
10) 2 units- Carbon Filter Tank
11) 1 lot – Chilled Bank (treated water) with
Cooling system (glycol)
12) 3 units- Sand filter Pump
13) 1 unit – Accumulator Pump
14) 3 units Hydro-pneumatic Pump
15) 1 unit – Booster Pump
● Boiler’s
2 units – Enertec Horizontal tube w/ wet back 150 hp & 80 hp
● Chilled water Systems – glycol cooling in chill
with 2 units – condensing unit
● Cooling tower system
2 units - Big & Small Cooling tower
Centralized Cold Store Unit – 4 unit compressors●
● Motor & Pumps systems
● Waste Water Treatment Facilities
1) Biological Activated Sludge System- aerobic
2) 500 cu. meter treatment capacity
3) Laboratory for BOD , COD , Tss/MLss ,
Oil & Grease , P/N testing
4) Control Room
5) Submersible Pumps & Motors for :
a) Lifting
b) Transfer
c) Cleaning (portable)
6) Aeration Tank
7) Clarification Tank w/ motor scraper

11. 8) Chlorine Contact Chamber w/ chlorine
dosing
Pump
9) Sludge Thickener Tank with feed pump
10) Sludge Holding Tank with transfer pump
11) 3 units – 50 HP Root type Air Blower
12) 1 unit – Sludge Belt-Press Machine with
Chemical pump & tanks
● Lighting Systems
√ - Supervision of Preventive Maintenance of All Electrical Machines & Equipments.
√ - Supervision of mechanical & electrical controls troubleshooting for Machineries &
Equipments.
√ - Assigned as SAFETY OFFICER of the factory and member of the HEALTH & SAFETY
COMMITTEE OF THE COMPANY & performed the duties as follows :
a.) Anticipate , identify & evaluate hazardous
conditions & practices.
b.) Develop hazard control designs , methods ,
procedures & programs.
c.) Implement , administer & advise others on
hazard control programs.
d.) Measure , audit and evaluate the effectiveness
of hazard control programs.
e.) Draft a future safety plan & statement based on
real time experiences and facts.
f.) Implement industrial hygiene & toxicology , fire
protection system , system & process safety ,
education & training methods and
measurement of safety performance.
√ - Supervised the Expansion Project of the factory regarding additional electrical
design & construction.
Maintenance Supervisor Foodlinks Incorporated ( Fast food Chain Restaurant’s )
(March ’98 – Aug. ‘98) Tektite Tower, Ortigas Center, Pasig , Philippines
Duties and Responsibilities:
√ - Supervision for the operation , maintenance & troubleshooting of fast food
equipment & machineries such as :
a) Soft-drink Dispenser Machine
b) Ice Maker Machine
c) Refrigeration Cabinet (chest type & upright)

12. d) Food Warmer
e) Dishwashing Machine
f) Air-conditioning units
g) Intake & exhaust system w/ motor’s
h) Coffee Maker Machine
i) Chilled Cabinets
j) Microwave Oven
k) Water pumps & motors
l) Lighting System & fixtures
m) Generators
n) Ice Cream Maker Machine
o) Chicken & French Fries Fryer
p) Burner ( gas & electric )
√ - Supervision for the electrical & mechanical troubleshooting.
√ - Supervision for the implementation of preventive maintenance of all electrical
equipment & machineries.
√ - Supervision for building maintenance and repair by subordinates.
Officer in Charge
(Gen. Maintenance Dept.) Emerald Pizza Incorporated ( Pizza Hut Restaurant’s )
(Feb. ’91 - March ’98) Annapolis Greenhills , San Juan City , Philippines
Duties and Responsibilities:
√ - Supervise & Monitor the maintenance staff & technicians for their specific task &
duties to be properly done.
√ - Supervision for the staff’s work during building maintenance and repair.
√ - Supervise the troubleshooting of all electrical equipments & machineries.
√- Supervision of the operation, maintenance & troubleshooting for all electrical
equipments & machineries such as :
a) Pizza Oven ( conveyor & gas type )
b) Dough Mixer
c) Dough Roller
d) Dishwashing Machine
e) Chiller unit
f) Refrigeration Cabinet
g) Microwave Machine
h) Freezer cabinet ( chest & upright freezer )
i) Air-conditioning unit ( centralized , split type &
window type )

13. j) Intake & exhaust motors
k) Ice Maker Machine
l) Chicken & French fries Fryer
m) Soft-drink Dispenser
n) Drainage System
o) Coffee Maker Machine
p) Water Pumps & Motors
q) Generators
√ - Preparation & Implementation of the Preventive maintenance Schedule of all
electrical equipments & machineries.
√ - Ensure the implementation of Health & Safety Policies of the company.
√ - Prepare the electrical design and installation for the construction of additional
Pizza Hut Restaurant’s.
Industrial Electrician Cosmos Bottling Corporation ( Food & Beverages Manufacturing )
(July ’90 – Jan ‘ 91) Mc Arthur Highway , Bulacan , Philippines
Duties and Responsibilities:
√ - Assigned as Shift Industrial Electrician
√ - Performed building maintenance and repair such as plumbing ,carpentry ,
painting , electrical , drainage system , ac units , welding & acytheline works etc.
√ - Troubleshooting of electrical wiring & controls , Pump & Motor & Motor
controls.
√ - Installation of electrical wires, lighting fixtures & electrical controls.
√ - Operation & Maintenance and troubleshooting of generators.
Electrician/Technician 680 Home Appliances Incorporation
(Jan ’87 – May ’88) (Home Appliances Commercial Establishment)
Edsa, Quezon City, Philippines
Duties and Responsibilities:
√ - Assigned as Electrician / Technician
√ -Assigned for the building maintenance and repair works such as electrical,
mechanical, painting, carpentry, ac units, plumbing, drainage system , welding works , etc.
√ - Operation, Maintenance & Troubleshooting of generator.
√ - Troubleshooting of electrical panel, wires & appliances.
√ - Installation of electrical wires & control’s & lighting fixtures.

14. REFERENCE:
1) Mark Santana
IMS-MR / LEAD AUDITOR
AL KIFAH PRECAST COMPANY
Abqaiq Road, New 2nd
Industrial city, Ad Dammam, Saudi Arabia
Tel. : +96638029144-9166 ext. 092
Mobile No: +966566249482
2) Rolando “rolly” Pena
UTILITY DEPARTMENT SUPERVISOR
YAKULT PHILIPPINES INCORPORATED
Bo. Makiling, Calamba City, Laguna, Philippines
Mobile No: +639198252580 or +639173070448
3) Roberto Almorfe
AGRI / ADMINISTRATION MANAGER
ESSENTIAL FRUITS INCORPORATED (EFI)
Km. 80 , Brgy. Malatgao, Narra Palawan
Mobile no. +639175770320
4) Engr. Joenel M. Raposon Jr.
TECHNICAL MANAGER
National Ready-Mix Company
Lootah Group
Mobile no. +971552121332