SlideShare a Scribd company logo

Mechanical Technician

S
S

Dear Sir, I'm Subramanian Narayanasamy from saudi arabia working in NES Global Ltd Client SADARA PETROCHEMICAL COMPANY and I have 14 years experiences in oil & gas company Maintenances field. MY CONTRACT END OF THIS MONTH JANUARY-31-2018 PLEASE ANY VACANCES IN OUR CONCERN PLEASE CONSIDER MY CV .

Mechanical Technician

1 of 4
Download to read offline
CURRICULUM VITAE
N. SUBRAMAIAN
Mobile: +91 9965352845
E-Mail: subbu.ctp@gmail.com
JOB OBJECTIVE
• Seeking Mid carrier level assignments in Plant Operations& Maintenance with an organization of
high repute, preferably in Oil & Gas sector
PROFILE SUMMARY
• A competent professional with an experience in Mechanical Technician in, Oil and Gas, and
Petrochemicals Since 14 years in Mechanical Maintenance, Commissioning & Startup and Turn
Over.
• Currently designated as a Mechanical Technician with NES Globe Ltd Saudi Arabia / Client- Sadara
Petrochemical Company, at Al-Jubail, Saudi Arabia
• Experienced in Maintenance, Troubleshoot and overhauling the Rotating equipment, for Centrifugal
Pumps, Positive displacement pump, Centrifugal Compressors, Reciprocating Compressors Gear
box, Air fin coolers and cooling towers in Oil and Gas, Petrochemical plants.
• Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing
and overhauling.
• Rectifying the shaft alignment of rotating equipment and knowledge about mechanical seal
replacing and seal plan problem solving
• Updating and closing the PM&CM Work orders and reported to maintenance supervisor at the right
time.
• Gained understanding of engineering drawing & principles to fully utilize & define Requirements for
Pumps, Compressor and Static equipment like, Exchanger, Columns, Tanks and vessels.
• Conducting Tool-box meeting and preparing Job Safety Analysis with crews before start any job.
• Possess excellent communication, interpersonal, organizational, and analytical, Trouble-shooting
and solving skills.
Organisational Experience
Sadara Petrochemical Company M/S NES Globe Ltd Saudi Arabia Aug 2016 to Jan 2018
Mechanical Technician
Role & Responsibility
• Attending tool box talk before the job starts on daily basis regarding company’s health, safety &
environmental policy, work permit & procedures.
• Carried out pre-commissioning, commissioning & start up activities in equipment such as motors,
pumps, blowers, steam turbines, boilers, air compressors.
• Carried out Preventive & Corrective maintenance program activities for Rotating and Static
equipment’s. Assisted the vendor in replacement of journal bearings, thrust bearings of steam
turbine and pumps.
• Rectifying the shaft alignment of rotating equipment and knowledge about mechanical seal replacing
and seal plan problem solving
• Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse
method and laser alignment)
Sadara - General Use Information
• Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak
test and inert gas purging.
• To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers
and all kind of valves.
• Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing
and overhauling.
• Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment &
machinery to lubricate for smooth operations.
• Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM)
• To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening
of high pressure joints.
• Carry out blinding and de-blinding of connecting pipelines to equipment.
• Ensuring that all the tools are properly utilized and Keeping tools & workplace clean on daily basis
• Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails.
Sipchem Petrochemical Company M/S Veolia Arabian Ltd Saudi Arabia Nov 2012 to July-2016
Mechanical Technician
Role & Responsibility
• Attending tool box talk before the job starts on daily basis regarding company’s health, safety &
environmental policy, work permit & procedures.
• To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening
of high pressure joints.
• Carry out blinding and de-blinding of connecting pipelines to equipment.
• Performing other works such as preparation of documents site measurements, maintaining spare
parts, transportation of material and site cleaning.
• To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers
etc
• Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse
method).
• Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM)
• Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak
test and inert gas purging.
• Carried out Preventive & Corrective maintenance program activities for Rotating and Static
equipment’s.
• Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment &
machinery to lubricate for smooth operations.
Chennai Petroleum Corporation Limited, India, M/S Pentagon Industrial services, June 2010 to Sep-2012
Mechanical Technician (Plant Maintenance)
Role & Responsibility
• Carried out Preventive and corrective maintenance program activities.
• Developing schedules on daily & weekly basis for preventive & corrective maintenance
• Make schedule, daily and weekly routine of preventive and corrective maintenance and prepare Safe
work permits for appropriate works like, hot work permit, lifting permit, and confined space permit.
• Preparing Safe work permits, hot work, Cold work lifting and confined space permit.
• To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening
of high pressure joints.
• Carry out blinding and de-blinding of connecting pipelines to equipment.
Sadara - General Use Information
• Perform Maintenance, Troubleshooting and Overhauling of different kinds of: (API & ISO Standard
Equipment) Centrifugal Pumps, Positive displacement pump, Centrifugal Compressors, Gear box,
Blower.
• Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse
method).
• Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug
valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
• Carried out daily activity of lubrication greasing, oil replacing and updated the system data for make
equipment history.
• Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails.
• Keeping tools & workplace clean on daily basis.
VA Tech Wabag Ltd ASGHAL, Doha, Qatar July 2009 to Feb2010
Mechanical Technician (Rotating Equipment)
Role & Responsibility
• Carry out erection of structural, piping, scaffolding and other related mechanical jobs.
• Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps.
• Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse
method).
• Carried out Preventive & Corrective maintenance program activities for Rotating and Static
equipment’s.
• Maintaining and monitoring Rotating equipment’s vibration and temperature performance.
• Perform Maintenance, Troubleshooting and Overhauling of different kinds of Rotating Equipment
like, Centrifugal Pump (Horizontal and Vertical), Submersible Pump, Compressors, Positive
Displacement Pumps, Gearbox, Blower, and Centrifuge Sludge Separation Machine.
• Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug
valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
• Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual
inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and
pumps.
Chennai Metro Power Plant M/S VA Tech Wabag Ltd, June 2003 to April 2009
Mechanical Technician (Plant Maintenance)
Role & Responsibility
• Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse
method).
• Carry out erection of structural, piping, scaffolding and other related mechanical jobs.
• Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps.
• Carried out Preventive & Corrective maintenance program activities for Rotating and Static
equipment’s.
• Preparing Safe work permits, hot work, Cold work lifting and confined space permit.
• Rectifying the shaft alignment of rotating equipment.
• To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening
of high pressure joints.
• Carry out blinding and de‐blinding of connecting pipelines to equipment.
• Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug
valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
• Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual
inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and
pumps.
Sadara - General Use Information
EDUCATION
• Diploma in Mechanical Engineering from Department of Technical Education, Government of Tamil Nadu,
India. Completed year 2002
COMPUTER SKILLS
• Conversant with:
 MS Office (Word& Excel) AND Internet Applications
CERTIFICATION / TRAINING / COURSES
• Undergone the following certification / courses on:
 Gantry crane-RIII Operator qualification TUV-Rhineland certificate Sadara company sponsor (Training
Centres-NITI)
 HSE Training conducted by Sadara company Ltd, Kingdom of Saudi Arabia
PERSONAL DETAILS
Date of Birth : 27th
May, 1980
Passport Status : S 0812281 (Validity up to 11/11/2027)
Skype ID : subbudurga.ctp@gmail.com
Nationality : Indian
Visa Status : Residence
Driving License Details : India Valid Driving License
Marital Status : Married
No. of Dependants : 2
Permanent Address : 33/56, Karuvalli (Post),
Omalur (TK), Salem Dist. – 636305,
TamilNadu, India.
Languages known : English, Tamil & Malayalam
Available : Immediately
Declaration
I hereby declare that all the details listed above are true to the best of my knowledge.
Date :
Place : Al Jubail – K.S.A
N.SUBRAMANIAN
Sadara - General Use Information

Recommended

Resume of John Prince (Rotating Equipment Technician)
Resume of John Prince (Rotating Equipment Technician)Resume of John Prince (Rotating Equipment Technician)
Resume of John Prince (Rotating Equipment Technician)JOHN PRINCE
 
Mechanical Technician
Mechanical TechnicianMechanical Technician
Mechanical TechnicianRashid Minhas
 
MECHANICAL TECHNICIAN (ROTATING EQUIPMENT)
MECHANICAL TECHNICIAN (ROTATING EQUIPMENT)MECHANICAL TECHNICIAN (ROTATING EQUIPMENT)
MECHANICAL TECHNICIAN (ROTATING EQUIPMENT)ThineshRajaNatarajan
 
Resume technician
Resume technicianResume technician
Resume technicianRaja paul
 
Nasheem CV- Commissioning Technician
Nasheem CV- Commissioning TechnicianNasheem CV- Commissioning Technician
Nasheem CV- Commissioning TechnicianNaseem Ansari
 
00-Mechanical Technician---
00-Mechanical Technician---00-Mechanical Technician---
00-Mechanical Technician---rohan contractor
 
MARIA AGNEL.M mechanical technician
MARIA AGNEL.M mechanical technicianMARIA AGNEL.M mechanical technician
MARIA AGNEL.M mechanical technicianagnel maria
 
Resume- Rotating Equipment supervisor
Resume- Rotating Equipment supervisorResume- Rotating Equipment supervisor
Resume- Rotating Equipment supervisornitin mokal
 

More Related Content

What's hot

SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...
SUPERVISOR CV  for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...SUPERVISOR CV  for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...Saleem P.P
 
Mechanical Maintenance Supervisor CV
Mechanical  Maintenance  Supervisor CVMechanical  Maintenance  Supervisor CV
Mechanical Maintenance Supervisor CVvaithiya nathan
 
Cv mechanical supervisor
Cv mechanical supervisorCv mechanical supervisor
Cv mechanical supervisorJames Ct
 
Leo Doc (CV)A(Mechanical Supervisor)
Leo Doc (CV)A(Mechanical Supervisor)Leo Doc (CV)A(Mechanical Supervisor)
Leo Doc (CV)A(Mechanical Supervisor)Leonardo David
 
DVenkatesh Rotating Equip cv 2016
DVenkatesh Rotating Equip cv 2016DVenkatesh Rotating Equip cv 2016
DVenkatesh Rotating Equip cv 2016D Venkatesh
 
Rotating Equipment Engineer
Rotating Equipment  EngineerRotating Equipment  Engineer
Rotating Equipment EngineerPrem Kumar R
 
CV Field Mechanical and Piping Engineer
CV Field  Mechanical  and Piping EngineerCV Field  Mechanical  and Piping Engineer
CV Field Mechanical and Piping EngineerPopovici Adrian
 
00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
 
Abdalla Ghanem CV.. rotating, reliability and mechanical engineering, and pl...
Abdalla Ghanem CV..  rotating, reliability and mechanical engineering, and pl...Abdalla Ghanem CV..  rotating, reliability and mechanical engineering, and pl...
Abdalla Ghanem CV.. rotating, reliability and mechanical engineering, and pl...Abdalla Ghanem
 
RESUME - Abhay Paranjape
RESUME - Abhay ParanjapeRESUME - Abhay Paranjape
RESUME - Abhay ParanjapeAbhay Paranjape
 

What's hot (20)

mechanical technician (1)
mechanical technician (1)mechanical technician (1)
mechanical technician (1)
 
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...
SUPERVISOR CV  for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...SUPERVISOR CV  for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...
SUPERVISOR CV for ONSHORE and OFFSHORE MECHANICAL, MANTENANCE, CONSTRUCTION ...
 
Mechanical Maintenance Supervisor CV
Mechanical  Maintenance  Supervisor CVMechanical  Maintenance  Supervisor CV
Mechanical Maintenance Supervisor CV
 
Cv mechanical supervisor
Cv mechanical supervisorCv mechanical supervisor
Cv mechanical supervisor
 
Leo Doc (CV)A(Mechanical Supervisor)
Leo Doc (CV)A(Mechanical Supervisor)Leo Doc (CV)A(Mechanical Supervisor)
Leo Doc (CV)A(Mechanical Supervisor)
 
DVenkatesh Rotating Equip cv 2016
DVenkatesh Rotating Equip cv 2016DVenkatesh Rotating Equip cv 2016
DVenkatesh Rotating Equip cv 2016
 
Resume Gopakumar Balakrishna Pillai
Resume Gopakumar Balakrishna PillaiResume Gopakumar Balakrishna Pillai
Resume Gopakumar Balakrishna Pillai
 
Karthik Resume
Karthik Resume Karthik Resume
Karthik Resume
 
Rotating Equipment Engineer
Rotating Equipment  EngineerRotating Equipment  Engineer
Rotating Equipment Engineer
 
Kannan resume
Kannan resumeKannan resume
Kannan resume
 
CV Field Mechanical and Piping Engineer
CV Field  Mechanical  and Piping EngineerCV Field  Mechanical  and Piping Engineer
CV Field Mechanical and Piping Engineer
 
Instrument Technician
Instrument  TechnicianInstrument  Technician
Instrument Technician
 
00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)00 resume of site supervisor (Pipeline & welding)
00 resume of site supervisor (Pipeline & welding)
 
NANIK COMMISSIONING
NANIK COMMISSIONINGNANIK COMMISSIONING
NANIK COMMISSIONING
 
Abdalla Ghanem CV.. rotating, reliability and mechanical engineering, and pl...
Abdalla Ghanem CV..  rotating, reliability and mechanical engineering, and pl...Abdalla Ghanem CV..  rotating, reliability and mechanical engineering, and pl...
Abdalla Ghanem CV.. rotating, reliability and mechanical engineering, and pl...
 
SUDHEESH CV .
SUDHEESH CV .SUDHEESH CV .
SUDHEESH CV .
 
SURESH CCR & FIELD OPERATOR
SURESH CCR & FIELD OPERATORSURESH CCR & FIELD OPERATOR
SURESH CCR & FIELD OPERATOR
 
RESUME PIPING SUPERVISOR
RESUME PIPING SUPERVISORRESUME PIPING SUPERVISOR
RESUME PIPING SUPERVISOR
 
CV instrument (E&I) Engineer2
CV instrument (E&I) Engineer2CV instrument (E&I) Engineer2
CV instrument (E&I) Engineer2
 
RESUME - Abhay Paranjape
RESUME - Abhay ParanjapeRESUME - Abhay Paranjape
RESUME - Abhay Paranjape
 

Similar to Mechanical Technician

Similar to Mechanical Technician (20)

CV - Senior Mechancial Technician
CV - Senior Mechancial TechnicianCV - Senior Mechancial Technician
CV - Senior Mechancial Technician
 
Selvan CM Technician CV
Selvan CM Technician CVSelvan CM Technician CV
Selvan CM Technician CV
 
LARRY CV
LARRY CVLARRY CV
LARRY CV
 
Sr Mechanical Technician
Sr Mechanical Technician Sr Mechanical Technician
Sr Mechanical Technician
 
Asirvatharavi Mech
Asirvatharavi MechAsirvatharavi Mech
Asirvatharavi Mech
 
nasrulla resume
nasrulla resumenasrulla resume
nasrulla resume
 
SHANKAR KUMAR (2) (1).DOC
SHANKAR KUMAR (2) (1).DOCSHANKAR KUMAR (2) (1).DOC
SHANKAR KUMAR (2) (1).DOC
 
kashif Nazeer Updated CV
kashif Nazeer Updated CVkashif Nazeer Updated CV
kashif Nazeer Updated CV
 
Jayshish (1)
Jayshish (1)Jayshish (1)
Jayshish (1)
 
KOC
KOCKOC
KOC
 
KOC
KOCKOC
KOC
 
Aqeel cv updated
Aqeel cv updatedAqeel cv updated
Aqeel cv updated
 
FINAL CV
FINAL CVFINAL CV
FINAL CV
 
QNFS_Rajasekhar Murugaiyan REV 1
QNFS_Rajasekhar Murugaiyan REV 1QNFS_Rajasekhar Murugaiyan REV 1
QNFS_Rajasekhar Murugaiyan REV 1
 
ResumeKevinNoiaFinal
ResumeKevinNoiaFinalResumeKevinNoiaFinal
ResumeKevinNoiaFinal
 
new_cv-2016
new_cv-2016new_cv-2016
new_cv-2016
 
Resume Hanif Shaikh Update (7)
Resume Hanif Shaikh Update (7)Resume Hanif Shaikh Update (7)
Resume Hanif Shaikh Update (7)
 
SAID SAAD ALY CV
SAID SAAD ALY CVSAID SAAD ALY CV
SAID SAAD ALY CV
 
Resume- N1 M Mokal New
Resume- N1 M Mokal NewResume- N1 M Mokal New
Resume- N1 M Mokal New
 
resume kwabena obeng
resume kwabena obeng  resume kwabena obeng
resume kwabena obeng
 

Recently uploaded

Sample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeSample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeHarshith A S
 
Searching and Sorting Unit II Part I.pptx
Searching and Sorting Unit II Part I.pptxSearching and Sorting Unit II Part I.pptx
Searching and Sorting Unit II Part I.pptxDr. Madhuri Jawale
 
Documento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfDocumento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfFRANCISCOJUSTOSIERRA
 
BRINDHA G AD21012 SELF INTRODUCTION.pdf
BRINDHA G  AD21012 SELF INTRODUCTION.pdfBRINDHA G  AD21012 SELF INTRODUCTION.pdf
BRINDHA G AD21012 SELF INTRODUCTION.pdfbrindhaaids12
 
sahana sri D AD21046 SELF INTRODUCTION.pdf
sahana sri D AD21046 SELF INTRODUCTION.pdfsahana sri D AD21046 SELF INTRODUCTION.pdf
sahana sri D AD21046 SELF INTRODUCTION.pdfsahanaaids46
 
Architectural Preservation - Heritage, focused on Saudi Arabia
Architectural Preservation - Heritage, focused on Saudi ArabiaArchitectural Preservation - Heritage, focused on Saudi Arabia
Architectural Preservation - Heritage, focused on Saudi ArabiaIgnacio J. Palma, Arch PhD.
 
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLEBHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLEKuberBhusal1
 
Metrology Measurements and All units PPT
Metrology Measurements and  All units PPTMetrology Measurements and  All units PPT
Metrology Measurements and All units PPTdinesh babu
 
GDSC solution challenge Android ppt.pptx
GDSC solution challenge Android ppt.pptxGDSC solution challenge Android ppt.pptx
GDSC solution challenge Android ppt.pptxAnandMenon54
 
SATHVIKA A AD21049 SELF INTRODUCTION.pdf
SATHVIKA A AD21049 SELF INTRODUCTION.pdfSATHVIKA A AD21049 SELF INTRODUCTION.pdf
SATHVIKA A AD21049 SELF INTRODUCTION.pdfSathvikaAlagar
 
Pre-assessment & Data Sheet presentation template - 2023.pptx
Pre-assessment & Data Sheet presentation template - 2023.pptxPre-assessment & Data Sheet presentation template - 2023.pptx
Pre-assessment & Data Sheet presentation template - 2023.pptxssuserc79a6f
 
UNIT I INTRODUCTION TO INTERNET OF THINGS
UNIT I INTRODUCTION TO INTERNET OF THINGSUNIT I INTRODUCTION TO INTERNET OF THINGS
UNIT I INTRODUCTION TO INTERNET OF THINGSbinuvijay1
 
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...GauravBhartie
 
Deluck Technical Works Company Profile.pdf
Deluck Technical Works Company Profile.pdfDeluck Technical Works Company Profile.pdf
Deluck Technical Works Company Profile.pdfartpoa9
 
Introduction about Technology roadmap for Industry 4.0
Introduction about Technology roadmap for Industry 4.0Introduction about Technology roadmap for Industry 4.0
Introduction about Technology roadmap for Industry 4.0RaishKhanji
 
SR Globals Profile - Building Vision, Exceeding Expectations.
SR Globals Profile -  Building Vision, Exceeding Expectations.SR Globals Profile -  Building Vision, Exceeding Expectations.
SR Globals Profile - Building Vision, Exceeding Expectations.srglobalsenterprises
 
Student Challange as Google Developers at NKOCET
Student Challange as Google Developers at NKOCETStudent Challange as Google Developers at NKOCET
Student Challange as Google Developers at NKOCETGDSCNKOCET
 
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation PerformanceGate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performancesuddentrike2
 

Recently uploaded (20)

Sample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeSample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its Outcome
 
Power System - Types of Power Plants overview
Power System - Types of Power Plants  overviewPower System - Types of Power Plants  overview
Power System - Types of Power Plants overview
 
Searching and Sorting Unit II Part I.pptx
Searching and Sorting Unit II Part I.pptxSearching and Sorting Unit II Part I.pptx
Searching and Sorting Unit II Part I.pptx
 
Documento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfDocumento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdf
 
BRINDHA G AD21012 SELF INTRODUCTION.pdf
BRINDHA G  AD21012 SELF INTRODUCTION.pdfBRINDHA G  AD21012 SELF INTRODUCTION.pdf
BRINDHA G AD21012 SELF INTRODUCTION.pdf
 
IGBT.ppt
IGBT.pptIGBT.ppt
IGBT.ppt
 
sahana sri D AD21046 SELF INTRODUCTION.pdf
sahana sri D AD21046 SELF INTRODUCTION.pdfsahana sri D AD21046 SELF INTRODUCTION.pdf
sahana sri D AD21046 SELF INTRODUCTION.pdf
 
Architectural Preservation - Heritage, focused on Saudi Arabia
Architectural Preservation - Heritage, focused on Saudi ArabiaArchitectural Preservation - Heritage, focused on Saudi Arabia
Architectural Preservation - Heritage, focused on Saudi Arabia
 
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLEBHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
 
Metrology Measurements and All units PPT
Metrology Measurements and  All units PPTMetrology Measurements and  All units PPT
Metrology Measurements and All units PPT
 
GDSC solution challenge Android ppt.pptx
GDSC solution challenge Android ppt.pptxGDSC solution challenge Android ppt.pptx
GDSC solution challenge Android ppt.pptx
 
SATHVIKA A AD21049 SELF INTRODUCTION.pdf
SATHVIKA A AD21049 SELF INTRODUCTION.pdfSATHVIKA A AD21049 SELF INTRODUCTION.pdf
SATHVIKA A AD21049 SELF INTRODUCTION.pdf
 
Pre-assessment & Data Sheet presentation template - 2023.pptx
Pre-assessment & Data Sheet presentation template - 2023.pptxPre-assessment & Data Sheet presentation template - 2023.pptx
Pre-assessment & Data Sheet presentation template - 2023.pptx
 
UNIT I INTRODUCTION TO INTERNET OF THINGS
UNIT I INTRODUCTION TO INTERNET OF THINGSUNIT I INTRODUCTION TO INTERNET OF THINGS
UNIT I INTRODUCTION TO INTERNET OF THINGS
 
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...
Microstrip Bandpass Filter Design using EDA Tolol such as keysight ADS and An...
 
Deluck Technical Works Company Profile.pdf
Deluck Technical Works Company Profile.pdfDeluck Technical Works Company Profile.pdf
Deluck Technical Works Company Profile.pdf
 
Introduction about Technology roadmap for Industry 4.0
Introduction about Technology roadmap for Industry 4.0Introduction about Technology roadmap for Industry 4.0
Introduction about Technology roadmap for Industry 4.0
 
SR Globals Profile - Building Vision, Exceeding Expectations.
SR Globals Profile -  Building Vision, Exceeding Expectations.SR Globals Profile -  Building Vision, Exceeding Expectations.
SR Globals Profile - Building Vision, Exceeding Expectations.
 
Student Challange as Google Developers at NKOCET
Student Challange as Google Developers at NKOCETStudent Challange as Google Developers at NKOCET
Student Challange as Google Developers at NKOCET
 
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation PerformanceGate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
 

Mechanical Technician

  • 1. CURRICULUM VITAE N. SUBRAMAIAN Mobile: +91 9965352845 E-Mail: subbu.ctp@gmail.com JOB OBJECTIVE • Seeking Mid carrier level assignments in Plant Operations& Maintenance with an organization of high repute, preferably in Oil & Gas sector PROFILE SUMMARY • A competent professional with an experience in Mechanical Technician in, Oil and Gas, and Petrochemicals Since 14 years in Mechanical Maintenance, Commissioning & Startup and Turn Over. • Currently designated as a Mechanical Technician with NES Globe Ltd Saudi Arabia / Client- Sadara Petrochemical Company, at Al-Jubail, Saudi Arabia • Experienced in Maintenance, Troubleshoot and overhauling the Rotating equipment, for Centrifugal Pumps, Positive displacement pump, Centrifugal Compressors, Reciprocating Compressors Gear box, Air fin coolers and cooling towers in Oil and Gas, Petrochemical plants. • Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing and overhauling. • Rectifying the shaft alignment of rotating equipment and knowledge about mechanical seal replacing and seal plan problem solving • Updating and closing the PM&CM Work orders and reported to maintenance supervisor at the right time. • Gained understanding of engineering drawing & principles to fully utilize & define Requirements for Pumps, Compressor and Static equipment like, Exchanger, Columns, Tanks and vessels. • Conducting Tool-box meeting and preparing Job Safety Analysis with crews before start any job. • Possess excellent communication, interpersonal, organizational, and analytical, Trouble-shooting and solving skills. Organisational Experience Sadara Petrochemical Company M/S NES Globe Ltd Saudi Arabia Aug 2016 to Jan 2018 Mechanical Technician Role & Responsibility • Attending tool box talk before the job starts on daily basis regarding company’s health, safety & environmental policy, work permit & procedures. • Carried out pre-commissioning, commissioning & start up activities in equipment such as motors, pumps, blowers, steam turbines, boilers, air compressors. • Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s. Assisted the vendor in replacement of journal bearings, thrust bearings of steam turbine and pumps. • Rectifying the shaft alignment of rotating equipment and knowledge about mechanical seal replacing and seal plan problem solving • Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method and laser alignment) Sadara - General Use Information
  • 2. • Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak test and inert gas purging. • To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers and all kind of valves. • Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing and overhauling. • Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment & machinery to lubricate for smooth operations. • Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM) • To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints. • Carry out blinding and de-blinding of connecting pipelines to equipment. • Ensuring that all the tools are properly utilized and Keeping tools & workplace clean on daily basis • Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails. Sipchem Petrochemical Company M/S Veolia Arabian Ltd Saudi Arabia Nov 2012 to July-2016 Mechanical Technician Role & Responsibility • Attending tool box talk before the job starts on daily basis regarding company’s health, safety & environmental policy, work permit & procedures. • To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints. • Carry out blinding and de-blinding of connecting pipelines to equipment. • Performing other works such as preparation of documents site measurements, maintaining spare parts, transportation of material and site cleaning. • To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers etc • Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method). • Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM) • Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak test and inert gas purging. • Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s. • Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment & machinery to lubricate for smooth operations. Chennai Petroleum Corporation Limited, India, M/S Pentagon Industrial services, June 2010 to Sep-2012 Mechanical Technician (Plant Maintenance) Role & Responsibility • Carried out Preventive and corrective maintenance program activities. • Developing schedules on daily & weekly basis for preventive & corrective maintenance • Make schedule, daily and weekly routine of preventive and corrective maintenance and prepare Safe work permits for appropriate works like, hot work permit, lifting permit, and confined space permit. • Preparing Safe work permits, hot work, Cold work lifting and confined space permit. • To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints. • Carry out blinding and de-blinding of connecting pipelines to equipment. Sadara - General Use Information
  • 3. • Perform Maintenance, Troubleshooting and Overhauling of different kinds of: (API & ISO Standard Equipment) Centrifugal Pumps, Positive displacement pump, Centrifugal Compressors, Gear box, Blower. • Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method). • Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos. • Carried out daily activity of lubrication greasing, oil replacing and updated the system data for make equipment history. • Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails. • Keeping tools & workplace clean on daily basis. VA Tech Wabag Ltd ASGHAL, Doha, Qatar July 2009 to Feb2010 Mechanical Technician (Rotating Equipment) Role & Responsibility • Carry out erection of structural, piping, scaffolding and other related mechanical jobs. • Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps. • Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method). • Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s. • Maintaining and monitoring Rotating equipment’s vibration and temperature performance. • Perform Maintenance, Troubleshooting and Overhauling of different kinds of Rotating Equipment like, Centrifugal Pump (Horizontal and Vertical), Submersible Pump, Compressors, Positive Displacement Pumps, Gearbox, Blower, and Centrifuge Sludge Separation Machine. • Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos. • Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and pumps. Chennai Metro Power Plant M/S VA Tech Wabag Ltd, June 2003 to April 2009 Mechanical Technician (Plant Maintenance) Role & Responsibility • Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method). • Carry out erection of structural, piping, scaffolding and other related mechanical jobs. • Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps. • Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s. • Preparing Safe work permits, hot work, Cold work lifting and confined space permit. • Rectifying the shaft alignment of rotating equipment. • To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints. • Carry out blinding and de‐blinding of connecting pipelines to equipment. • Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos. • Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and pumps. Sadara - General Use Information
  • 4. EDUCATION • Diploma in Mechanical Engineering from Department of Technical Education, Government of Tamil Nadu, India. Completed year 2002 COMPUTER SKILLS • Conversant with:  MS Office (Word& Excel) AND Internet Applications CERTIFICATION / TRAINING / COURSES • Undergone the following certification / courses on:  Gantry crane-RIII Operator qualification TUV-Rhineland certificate Sadara company sponsor (Training Centres-NITI)  HSE Training conducted by Sadara company Ltd, Kingdom of Saudi Arabia PERSONAL DETAILS Date of Birth : 27th May, 1980 Passport Status : S 0812281 (Validity up to 11/11/2027) Skype ID : subbudurga.ctp@gmail.com Nationality : Indian Visa Status : Residence Driving License Details : India Valid Driving License Marital Status : Married No. of Dependants : 2 Permanent Address : 33/56, Karuvalli (Post), Omalur (TK), Salem Dist. – 636305, TamilNadu, India. Languages known : English, Tamil & Malayalam Available : Immediately Declaration I hereby declare that all the details listed above are true to the best of my knowledge. Date : Place : Al Jubail – K.S.A N.SUBRAMANIAN Sadara - General Use Information