Done by Leaders group at Al-Shahania Secondary School For Boys. Under supervision from AL-Bairaq

1. AL-Bairaq
I am Discovering Materials
manipulation of light
Mohamed al-shamari Jhad al-shamari
Abd-alhadi al-qahtani hatem al-shamari
Leaders

2. Outline
• Introduction
• Activities
– Lights And Their Spectra
– Observing Diffraction
– Observing Interference
– Observing Iridescence
• Product Idea: design light signal for
bicycle

3. Introduction
.
Light is a transverse, electromagnetic wave
that can be seen by the typical human. Like
all electromagnetic waves, light can travel
through a vacuum.

4. Activities
Activity 1: Lights and Their
Spectra
In this activity we used a
compact disc to make a
Spectroscope to explore the
component colors, or spectra
of light emitted from different
light sources
Activity 2: Observing
Diffraction
In this activity we learnt about
diffraction of waves. We
observed diffraction of water
and light waves as they pass
through openings of different
widths
Photo of Activity 2Photo of Activity 1

5. Activities
Activity 3: Observing
Interference
In our third activity, we learnt
about constructive and
destructive interference of
waves in 1Dimentions such as
a wave passing through a
string, 2D like water waves, 3D
as light waves.
Activity 4: Observing
Iridescence
We observed that we can see
colors not only from the
pigments of subjects but also
as a result of iridescence. We
learnt that iridescence can be
caused by thin films, as well as
the nanostructure of the
material.
Photo of Activity 4Photo of Activity 3

6. Final project
design light signal for bicycle
´Introduction
´ We think to design a light signal
in the bicycle because we
noticed a large number of
accidents happened to the
riders of the bicycle and cars
´ We have benefited from Al-bairaq activities that we can
use acrylic sheet and L.E.D bulbs to perform our project
´The aim of our project: design a light signal
for bicycle to decrease the accidents of bicycles.

7. design light signal for bicycle
Hypothesis
´To design light signal in the
bicycle to decrease the
bicycle accidents

8. design light signal for bicycle
method and material
Materials :acrylic sheet –wires –LED
bulbs –switches
Method:
1-drill the signs on the acrylic sheet
2-fix the LED bulbs
3-connect the wires with bulbs and switches
4-fix the switches to the steering wheel
5-try the model

9. design light signal for bicycle
Results
´ This project is expected to have several important
results
´ 1-increasing the efficiency of bicycle riders
´ 2-reduce traffic accidents caused by bicycles
especially in cities
´ 3-pedestrian alert for bicycle directions and
avoid collisions

10. Design light signal for bicycle
recommendations
´ We recommend that a company adopt this
product FTER IT IS DEVELOPED and put into the
market
´ Cycling companies adopt this idea and add this
model to the bike so that it is part of the bike
because it is important in achieving the safety of
the cyclists and also the pedestrians

11. Conclusions
Through our participation with
Al-bairaq team , we have
acquired many of the
most important
knowledge and skills
1-Ability to work
cooperatively and
teamwork
2-self –confidence and self-
development
3-developing research skills
and use materials
effectively
4-organize ideas and find
alternative solutions

12. Acknowledgment
Many thanks to my teachers, school and AL-Bairaq
team from Center for Advanced Materials (CAM),
Qatar University for supporting us during our journey
with a AL-Bairaq.
Also, we would like to thank the sponsors UNESCO,
Qatar National Commission.