This document provides instructions for taking a client's body measurements accurately to create well-fitting clothing. It defines girth and length measurements and lists specific body parts to measure, including the shoulder, bust, waist, hips, armhole, arm, back figure, front figure, bust point height, sleeve length, skirt length and pants length. Rules are given, such as using a non-stretch tape measure and taking measurements with the client in undergarments. Accurate measurements are important for producing correctly sized patterns and garments.

1. TAKING CLIENT’S
BODY
MEASUREMENT

2. WORDS TO STUDY
Girth Measurements- taken horizontally
and most of them go around the entire
circumference of the body
Length Measurements- taken vertically
and their primary purpose is to measure
the distance between reference points
of the body

3. Rules in Taking Body Measurements
1. Use a tape measure that does not stretch.
2. Make sure your client wears well-fitted undergarments
and outer garments.
3. Tie a string around the natural waistline of the client.
4. Ask the client to stand in a relaxed, upright position.
5. Take girth measurements, then vertical measurements.
6. Insert two fingers in the tape measure in taking
circumferential measurements.
7. Be sure to keep the tape measure parallel to the floor.
8. Pull the tape snug, but not too tight.
9. Record accurately all measurements on a chart.

4. Sample Individual Measurement Chart
Name: Date:
Body Parts Actual Body Measurement
(inches)
Divisor Computed Pattern Measurement
(inches)
1. Shoulder 15 2 7 ½
2. Bust Point Width 6 ½ 2 3 ¼
3. Bust 34 4 8 ½
4. Waist 25 4 6 ¼
5. First Hip 30 4 7 ¼
6. Second Hip 34 4 8 ½
7. Armhole 15 2 7 ½
7. Arm girth 10 ½ 2 5 ¼
8. Back Figure 15 1 15
9. Front Figure 15 ½ 1 15 ½
10. Bust Point Height 8 ½ 1 8 ½
11. Sleeve Length 8 1 8
12. Skirt Length 22 1 22
13. Pants Length 35 1 35

5. Procedure in Taking Body Measurements
There are several parts of the body to be measured.
These measurements are grouped as follows:
Horizontal measurements
Circumferential measurements
Vertical measurements

6.  Shoulder –
Measurement is
taken from the
tip of the left
shoulder to the
tip of the right
shoulder,
arching slightly
to cover the
cervical
prominence of
Horizontal Measurements - are taken from
the left of the body to the right

7.  Bust Point
Width/ Apex
Distance –
Measurement is taken
across from the tip of
the left bust point to
the tip of the right bust
Horizontal Measurements

8.  Bust –
Measurement is
taken around the
bust with the tape
measure running
on the same level
in front, at the
back and on the
sides.
Circumferential Measurements – are taken
around the body

9.  Waist –
Measurement
is taken
around the
smallest part
of the torso
Circumferential Measurements

10.  First Hip –
Measurement
is taken around
the hip level
where the
stomach is
fullest.
Circumferential Measurements

11.  Second
Hip –
Measurement is
taken around
the hip level
where the
buttocks are
fullest.
Circumferential Measurements

12.  Armhole –
Measurement
is taken
around the
armhole.
Circumferential Measurements

13.  Arm girth
–
Measurement
is taken
around the
arm.
Circumferential Measurements

14.  Figure
Back –
Measurement is
taken from the
center of the
back shoulder
over the blade
down to the
Vertical Measurements – are taken from the
top of the body figure to its base.

15.  Figure
Front –
Measurement
taken from the
neck point
passing over the
bust down to the
waistline level
Vertical Measurements

16.  Bust point
Height/
Apex
Height –
Measurement is
taken from the
neck point down
to the highest
Vertical Measurements

17.  Length of
Sleeve –
Measurement is
taken from the
shoulder point
down to the
desired length in
the arms
Vertical Measurements

18.  Length of Skirt –
Measurement is taken
from the waist down to
the desired length of
skirt
Vertical Measurements

19.  Pants
Length –
Measurement
is taken from
the waist down
to the desired
length of pants
Vertical Measurements

20.  Measurements should be accurate
and exact, not tight or loose.
 Accurate body measurements help
produce correct patterns and well-
fitted garments.
 Time in constructing a garment is
saved if body measurements are taken
LET US REMEMBER

21. Prepared by:
JEREBELLE B.
DULLA
Teacher I/ Palinta NHS