Slesarenko Sergey, the project "Material Raflon", the company "Quantum R", we work in the field of radiation chemistry. (Slide №2) We have created a technology for programming the properties of polymers. Using our techonology with the help of radiation we can regulate the properties of polymers: 1. If you expose the polymer to radiation - it will be destroyed. 2. If you add a special external environment to the irradiation, polymer properties will significantly improve 3. If you add nanoparticles to irradiation and external environment – you will be able to manage properties / add new properties. (Slide №3) For example, on the basis of the PTFE material (better known under TM Teflon), we created the new material Raflon PTFE itself has been widely used in medicine, it has a huge set of positive properties, one problem is not wear-resistant. (Slide №4) Our Raflon material, without losing the uniqueness of the PTFE material, acquires: Increased wear resistance by 10 000 times Now it can be used in critical sites. (Slide №5) For example, in prostheses of human joints. Joint replacement is a complex, expensive, and painful procedure. 2 million operations are carried out annually. Each fifth repeated operation occurs due to wear of the rubbing part of the prosthesis - the liner. This part is erased when moving. If it is worn out, the new replacement of the joint is needed Currently only 2 materials are used to manufacture the liner: polyethylene (85% of the market) and ceramics (15% of the market). Raflon is better, cheaper and easier to manufacture. (Slide №6) Prosthesis market: $ 25 billion, liner’s share: ~ $ 2 billion. LTV - hundreds of millions of $, because The latest introduction of new materials into prosthesis was over 30 years ago. CAC – need of approval by the FDA. One certificate would be enough for all manufacturers. This year we’re planning to start similar tests in Russia. At the moment, our partner – a prosthesis manufacturer is already starting to conduct these tests. In two months through LinkedIN, seven of the top ten companies in the world have showed interest in Raflon material. (Slide №7) Business model. Sale of material or sale of a franchise for the production of material + equipment + royalties payments (Raflon is patented in 6 countries). (Slide №8) And this is the only one of the possible ways of applying our material. Raflon can be used wherever there are friction pieces. (bearings, cryogenic industry, space, nuclear industry, engineering, aviation, rocket science, etc.) (Slide №9) The method of obtaining the material.