This document contains the resume of Eng'r Wajid Ali Shah, a registered electrical engineer in Saudi Arabia and Pakistan with over 10 years of experience in engineering, procurement, construction, commissioning, operation, and maintenance of power plants, substations, and buildings. His experience includes working as a senior design engineer on a 2400MW combined cycle power plant and desalination plant in Saudi Arabia, and as an electrical project engineer on a 3000MW simple cycle power plant in Saudi Arabia. He has expertise in areas such as power generation, substations, engineering design, and project management.
Rex Scott has over 27 years of experience in electrical engineering, project management, and control systems for the oil and gas industry. He has a B.Sc. in Electrical Engineering from the University of Calgary and is a registered professional engineer in Alberta and British Colombia. His experience includes managing departments and projects, power system design, PLC programming, and commissioning electrical systems for numerous oil and gas facilities.
Juliet Joseph is applying for the position of Electrical Engineer. She holds a Bachelor of Technology degree in Electrical and Electronics Engineering from 2013. She has over 5 years of experience as an Electrical Engineer working on projects in the UAE and Saudi Arabia for companies like Tebodin, JSE Engineering, and ADCO. Her experience includes performing load flow and short circuit studies, preparing engineering drawings and specifications, and reviewing designs. She is proficient in software like ETAP, AutoCAD, and Enervista.
Abdul Alim Dewan has over 13 years of experience in transmission and distribution projects including planning, scheduling, monitoring, procurement, and project coordination. He is currently working as an Assistant Project Manager for Mohammed Al-Ojaimi Contracting Est. on a 132/13.8kV GIS substation project in Riyadh, Saudi Arabia. Previously, he worked on substation projects in Saudi Arabia and Mozambique, holding roles such as Site Manager. He has a Bachelor's degree in Electrical Engineering and certifications in Project Management, Safety Training, and AutoCAD.
This document is a curriculum vitae for D. Sheik Syedali, an electrical engineer with over 5 years of experience in Saudi Arabia and Oman. He has experience installing and coordinating the erection of 380kV, 132kV, and 13.8kV switchyards and substations for companies like ABB, Hyundai, and Siemens. Currently he works as a site electrical engineer in Saudi Arabia coordinating the installation of equipment like GIS, transformers, reactors, and switchgear.
This document contains a resume for Venkataramana Kintali, an electrical engineer with 6 years of experience working in construction, wind, and hydroelectric power sectors. It lists his educational background, contact information, objectives, and work experience including roles as Deputy Manager for wind and hydroelectric power companies where he oversaw maintenance, operations, and projects. It details his responsibilities and accomplishments in planning, installation, and maintenance of electrical equipment, substations, transmission lines, and more. The resume emphasizes his competencies in electrical systems, project execution, team leadership, and adaptation to new technologies.
Ajit Kumar is a senior electrical engineer with over 26 years of experience in design, operation and maintenance of large industrial complexes, power plants, and substations. He has extensive experience in protection design, relay setting, and coordination for systems up to 230 kV. Currently he works as a senior protection engineer for Tebodin in Oman, where he performs protection studies and reviews protection documents for Petroleum Development Oman facilities.
S. Edwin is applying for the position of Electrical Technician. He has over 20 years of experience in electrical maintenance and commissioning in oil refineries and power plants in India and Kuwait. He holds a diploma in electrical engineering and has extensive training in safety, electrical systems, and maintenance. His responsibilities have included maintenance, troubleshooting, commissioning, and overseeing maintenance personnel.
This document provides a summary of Selvarajan G's work experience and qualifications. It outlines his 25 years of experience in electrical work, including 16 years of international experience in Yemen, Oman, and Libya oil fields. His roles have included chief electrician, rig electrician, electrical foreman, and senior electrician. He has experience maintaining electrical equipment on drilling rigs and camps according to maintenance plans and specifications. He is skilled in areas like inventory management, electrical installations, troubleshooting, and safety compliance. He holds qualifications like an electrical supervisor license and BOSIET certification.
Rex Scott has over 27 years of experience in electrical engineering, project management, and control systems for the oil and gas industry. He has a B.Sc. in Electrical Engineering from the University of Calgary and is a registered professional engineer in Alberta and British Colombia. His experience includes managing departments and projects, power system design, PLC programming, and commissioning electrical systems for numerous oil and gas facilities.
Juliet Joseph is applying for the position of Electrical Engineer. She holds a Bachelor of Technology degree in Electrical and Electronics Engineering from 2013. She has over 5 years of experience as an Electrical Engineer working on projects in the UAE and Saudi Arabia for companies like Tebodin, JSE Engineering, and ADCO. Her experience includes performing load flow and short circuit studies, preparing engineering drawings and specifications, and reviewing designs. She is proficient in software like ETAP, AutoCAD, and Enervista.
Abdul Alim Dewan has over 13 years of experience in transmission and distribution projects including planning, scheduling, monitoring, procurement, and project coordination. He is currently working as an Assistant Project Manager for Mohammed Al-Ojaimi Contracting Est. on a 132/13.8kV GIS substation project in Riyadh, Saudi Arabia. Previously, he worked on substation projects in Saudi Arabia and Mozambique, holding roles such as Site Manager. He has a Bachelor's degree in Electrical Engineering and certifications in Project Management, Safety Training, and AutoCAD.
This document is a curriculum vitae for D. Sheik Syedali, an electrical engineer with over 5 years of experience in Saudi Arabia and Oman. He has experience installing and coordinating the erection of 380kV, 132kV, and 13.8kV switchyards and substations for companies like ABB, Hyundai, and Siemens. Currently he works as a site electrical engineer in Saudi Arabia coordinating the installation of equipment like GIS, transformers, reactors, and switchgear.
This document contains a resume for Venkataramana Kintali, an electrical engineer with 6 years of experience working in construction, wind, and hydroelectric power sectors. It lists his educational background, contact information, objectives, and work experience including roles as Deputy Manager for wind and hydroelectric power companies where he oversaw maintenance, operations, and projects. It details his responsibilities and accomplishments in planning, installation, and maintenance of electrical equipment, substations, transmission lines, and more. The resume emphasizes his competencies in electrical systems, project execution, team leadership, and adaptation to new technologies.
Ajit Kumar is a senior electrical engineer with over 26 years of experience in design, operation and maintenance of large industrial complexes, power plants, and substations. He has extensive experience in protection design, relay setting, and coordination for systems up to 230 kV. Currently he works as a senior protection engineer for Tebodin in Oman, where he performs protection studies and reviews protection documents for Petroleum Development Oman facilities.
S. Edwin is applying for the position of Electrical Technician. He has over 20 years of experience in electrical maintenance and commissioning in oil refineries and power plants in India and Kuwait. He holds a diploma in electrical engineering and has extensive training in safety, electrical systems, and maintenance. His responsibilities have included maintenance, troubleshooting, commissioning, and overseeing maintenance personnel.
This document provides a summary of Selvarajan G's work experience and qualifications. It outlines his 25 years of experience in electrical work, including 16 years of international experience in Yemen, Oman, and Libya oil fields. His roles have included chief electrician, rig electrician, electrical foreman, and senior electrician. He has experience maintaining electrical equipment on drilling rigs and camps according to maintenance plans and specifications. He is skilled in areas like inventory management, electrical installations, troubleshooting, and safety compliance. He holds qualifications like an electrical supervisor license and BOSIET certification.
This document provides details about the author's qualifications, including their education, experience, career history, projects, and engineering experience. It outlines the author's MSc and BSc in mechanical engineering. It then describes over 33 years of experience in mechanical and process control engineering for power plants. It lists the author's various roles and responsibilities in their career history from 2005 to the present as well as 1984 to 2005. It provides examples of projects the author has worked on and engineering solutions they developed to address issues at various power plants.
Nidec asi electric power solutions for ship to shore connectionNidec Corporation
NIDEC ASI develops shore connection technologies to transfer electric power from land to ships docked at port. This allows ships to turn off their diesel generators and instead use shoreside power, reducing emissions. NIDEC ASI's automation systems control the switching between the ship's power system and shoreside power supply. Large ships require 1-5 MW of electric power for onboard systems while in port.
This document provides a summary of Mahesh Nai's qualifications and work experience. It outlines his educational background which includes a Diploma in Electrical Engineering. It then lists his various electrical licenses and certificates. The document describes Mahesh's work experience in commissioning electrical systems for gas projects, as a rig electrician, senior electrician, and other roles maintaining and repairing various electrical equipment. It provides details of the tasks and responsibilities in these roles.
Rakesh Patel has over 17 years of experience in electrical engineering project management and operations and maintenance of gas turbines. He has successfully managed large projects including the annual turnaround of a petroleum complex. Currently he works as a Maintenance Engineer Electrical at ADCO in Abu Dhabi where he oversees the maintenance of electrical systems including transformers, switchgear, motors, and diesel generators. He has extensive experience commissioning new gas turbines and managing their preventative maintenance.
The document describes the Silcovert TN 3300V converter. It is a single converter with an NPC-type voltage source IGBT inverter that can be configured with either a diode front end or active front end. The base configuration includes components like an input converter, output reactors, capacitors, safety switches, sensors, and a cooling system. It provides output power from 1300 to 21,600 kVA. Standard control types include scalar, sensorless vector, and field-oriented vector control. The document provides details on the converter components, layout, control system, user interface, and applications.
Flex Leasing Power and Service Introduction Presentation 2016-02-15Mark MacLean
This document provides an overview of FlexEnergy and its gas turbine technology. It discusses:
- FlexEnergy's acquisition of Ingersoll Rand's gas turbine business in 2011 and subsequent focus on providing reliable power solutions for the oil and gas industry.
- FlexEnergy's 250kW and 333kW gas turbine generators which are based on a proven design and can operate on a wide range of fuel gases. The turbines offer high uptime, low emissions and simple maintenance.
- FlexEnergy also offers leasing and service programs to provide turnkey power solutions for remote oil and gas sites, with monitoring to ensure high reliability.
The turbines offer advantages over diesel generators and reciprocating engines in their ability to
Livewire Automation recently completed the commissioning scope for the Arrow Energy Daandine expansion project. We would like to thank both Arrow Energy and the technicians that did an excellent job on site.
Business opportunities in PHWR and technical preparedness from vendors Philip...ProSIM R & D Pvt. Ltd.
The document outlines NPCIL's plans to build nuclear reactors in India in a "fleet mode" whereby 10 reactors of 700MWe each will be constructed simultaneously over the next 10-12 years, presenting challenges for standardized engineering, establishing a robust supply chain, and developing adequate human resources for the nuclear industry to support the rapid expansion.
Satham Mohamed is an electrical engineer with over 5 years of experience working on transmission and distribution projects in Saudi Arabia and the UAE. He has extensive experience managing substation projects involving gas insulated switchgear, power transformers, switchboards, and cable works. Some of the key projects he has worked on include the 110/33/13.8kV Al Khurmah substation in Saudi Arabia and several 132/11kV substations in Dubai. He is currently serving as the senior engineer on the Al Khurmah substation project in Saudi Arabia.
Conceptual Electrical Systems of a CANDU 80 Small Modular ReactorKandarp Mehta
The document discusses the conceptual design of the electrical power system for a proposed 80MWe CANDU small modular reactor. It outlines the objectives, loads, requirements, and evaluated power sources. It determines that a microgrid powered by 2 or more diesel generators would satisfy reliability needs for Class IV power, while a single diesel generator could provide Class III power due to meeting reliability, availability, and startup time requirements. The conclusions recommend this configuration for the conceptual electrical system design.
Sandeep Singh is an electrical engineer with over 5 years of experience in project execution, planning, site management, maintenance, and commissioning of electrical systems for oil, gas, petrochemical, chemical, and power plants. He is currently working as a Project Executive Engineer at UPL Limited, coordinating technical reviews, procurement, inspections, and site execution. Previously, he worked at Reliance Industries on projects including a 220kV switchyard expansion and a 300MW coal-fired power plant. He is proficient in engineering software, electrical codes, and has safety certifications.
Rejith.N.R has over 10 years of experience in electrical testing, pre-commissioning, and commissioning of power projects and substations in Qatar. He currently works as a Testing Foreman for Qatar Engineering and Construction Company, overseeing testing and commissioning jobs. Some of his major projects involve work for Qatar Gas, RasGas, Qatar Fertilizer Company, and offshore platforms.
This document is a project report on the Kota Super Thermal Power Station submitted by Shri Akash Bhai Sundarkand Wale for their Bachelor of Technology degree. It provides details of the power station, which has four stages with a total generation capacity of 1,045 MW. It describes the key components of the power station including the coal handling plant, boilers, steam turbines, generators, transformers and other electrical equipment. The report also includes figures and tables providing technical specifications of the various equipment.
(1) Granada Green Energy provides clean energy and infrastructure solutions in the USA, Pakistan, Saudi Arabia and MENA region utilizing natural gas, biogas and waste-to-energy technologies.
(2) They design, install and operate natural gas fueling infrastructure for transportation, power generation and marine vessels, as well as combined cooling, heating and power systems and biogas and wastewater treatment facilities.
(3) Their energy solutions are based on Capstone microturbine generators that efficiently convert natural gas to electricity with overall system efficiencies up to 90% when paired with absorption chillers.
This document contains the resume of Onyejose Chukwuma, an electrical engineer with over 7 years of experience in high voltage, medium voltage, and low voltage electrical installations, testing, commissioning, operations, and maintenance of electrical projects. He has worked as a central control room operator and shift lead/control room operator at two power plants in Nigeria. His experience includes operating gas turbines, diesel generators, switchgear, transformers, and more. He holds several professional certifications in safety and gas turbine operation and maintenance.
The 132kV transmission line connection to Boggabri Coal Operations was the first of its kind for a coal mine in NSW. It included a 15km transmission line, switching station, and substation to supply the mine's increased power demands of up to 8MVA. While innovative, the project faced challenges integrating the transmission-oriented design with the mine's operations. Collaboration between the transmission and mining industries was needed to address differences in design philosophies, protection schemes, and isolation procedures. Key outcomes included agreements on equipment isolation, communication protocols, and training to safely operate the shared infrastructure.
Solar Power Engineering & Operation Maintenances krishna mohan
Krishna Mohan is seeking assignments in project management or operations and maintenance in the power industry, preferably related to power generation, project management, or energy management. He has over 6 years of experience working on solar and wind power projects totaling over 1,250 MW in capacity. His experience includes project design, procurement, execution, commissioning, and operations and maintenance. He is currently working as an Assistant Manager on the development of a 150 MW solar park project in Vadodara, Gujarat.
Muhammad Kashif Rafiq is an electrical engineer with over 10 years of experience testing and commissioning substations in Saudi Arabia. He is currently a Testing & Commissioning Engineer at Hyundai Heavy Industries Co Limited in Al Shuqaiq, KSA, where his responsibilities include testing various switchgear equipment, transformers, generators, and more. Previously, he worked as a Testing & Commissioning Engineer and Site Electrical Engineer in Saudi Arabia, and held electrical supervisory and technician roles in Pakistan. He is seeking new opportunities that utilize his strong technical and management skills.
Derek McWhirter is an advisory engineer with extensive experience designing, implementing, and commissioning control systems for oil and gas production and processing facilities, power generation equipment, and industrial plants. He has proficiency with many PLCs, HMIs, and other control devices, as well as software to configure them. Representative projects include control system upgrades and additions for Chevron, Dow Chemical, HESS, Frito Lay, Solae, NASA, Marathon, Unocal, and Solar Turbines facilities.
This report describes the development of a power conversion system for a floating tidal stream generator called the Evopod. A prototype Evopod will generate 25kW and test the effects of the marine environment. Optima Control Solutions designed power conversion equipment including a regenerative power converter, transformers, cables, and control systems to maximize power generation at different tidal flows and minimize transmission losses. Extensive simulation and dynamometer testing validated the design's performance before sea trials.
Syed Salman Ali is seeking a senior techno-managerial position. He has over 8 years of experience working as a chiller operator and plant room maintenance helper for various organizations such as Aga Khan University Hospital, Dolmen Mall Clifton, and Liberty Energy (Pvt) Ltd. He has technical qualifications in refrigeration/air conditioning and computer hardware & networking.
Muhammad Zubair has over 6 years of experience working in various roles at MCB Bank Limited, currently as a Branch Manager. He holds an MS in Finance, MBA in Finance, and B.Com. Zubair seeks a challenging career opportunity in the corporate sector to allow for growth. He has received awards for his work and completed specialized trainings in areas such as internal controls, cyber crimes, and time management.
This document provides details about the author's qualifications, including their education, experience, career history, projects, and engineering experience. It outlines the author's MSc and BSc in mechanical engineering. It then describes over 33 years of experience in mechanical and process control engineering for power plants. It lists the author's various roles and responsibilities in their career history from 2005 to the present as well as 1984 to 2005. It provides examples of projects the author has worked on and engineering solutions they developed to address issues at various power plants.
Nidec asi electric power solutions for ship to shore connectionNidec Corporation
NIDEC ASI develops shore connection technologies to transfer electric power from land to ships docked at port. This allows ships to turn off their diesel generators and instead use shoreside power, reducing emissions. NIDEC ASI's automation systems control the switching between the ship's power system and shoreside power supply. Large ships require 1-5 MW of electric power for onboard systems while in port.
This document provides a summary of Mahesh Nai's qualifications and work experience. It outlines his educational background which includes a Diploma in Electrical Engineering. It then lists his various electrical licenses and certificates. The document describes Mahesh's work experience in commissioning electrical systems for gas projects, as a rig electrician, senior electrician, and other roles maintaining and repairing various electrical equipment. It provides details of the tasks and responsibilities in these roles.
Rakesh Patel has over 17 years of experience in electrical engineering project management and operations and maintenance of gas turbines. He has successfully managed large projects including the annual turnaround of a petroleum complex. Currently he works as a Maintenance Engineer Electrical at ADCO in Abu Dhabi where he oversees the maintenance of electrical systems including transformers, switchgear, motors, and diesel generators. He has extensive experience commissioning new gas turbines and managing their preventative maintenance.
The document describes the Silcovert TN 3300V converter. It is a single converter with an NPC-type voltage source IGBT inverter that can be configured with either a diode front end or active front end. The base configuration includes components like an input converter, output reactors, capacitors, safety switches, sensors, and a cooling system. It provides output power from 1300 to 21,600 kVA. Standard control types include scalar, sensorless vector, and field-oriented vector control. The document provides details on the converter components, layout, control system, user interface, and applications.
Flex Leasing Power and Service Introduction Presentation 2016-02-15Mark MacLean
This document provides an overview of FlexEnergy and its gas turbine technology. It discusses:
- FlexEnergy's acquisition of Ingersoll Rand's gas turbine business in 2011 and subsequent focus on providing reliable power solutions for the oil and gas industry.
- FlexEnergy's 250kW and 333kW gas turbine generators which are based on a proven design and can operate on a wide range of fuel gases. The turbines offer high uptime, low emissions and simple maintenance.
- FlexEnergy also offers leasing and service programs to provide turnkey power solutions for remote oil and gas sites, with monitoring to ensure high reliability.
The turbines offer advantages over diesel generators and reciprocating engines in their ability to
Livewire Automation recently completed the commissioning scope for the Arrow Energy Daandine expansion project. We would like to thank both Arrow Energy and the technicians that did an excellent job on site.
Business opportunities in PHWR and technical preparedness from vendors Philip...ProSIM R & D Pvt. Ltd.
The document outlines NPCIL's plans to build nuclear reactors in India in a "fleet mode" whereby 10 reactors of 700MWe each will be constructed simultaneously over the next 10-12 years, presenting challenges for standardized engineering, establishing a robust supply chain, and developing adequate human resources for the nuclear industry to support the rapid expansion.
Satham Mohamed is an electrical engineer with over 5 years of experience working on transmission and distribution projects in Saudi Arabia and the UAE. He has extensive experience managing substation projects involving gas insulated switchgear, power transformers, switchboards, and cable works. Some of the key projects he has worked on include the 110/33/13.8kV Al Khurmah substation in Saudi Arabia and several 132/11kV substations in Dubai. He is currently serving as the senior engineer on the Al Khurmah substation project in Saudi Arabia.
Conceptual Electrical Systems of a CANDU 80 Small Modular ReactorKandarp Mehta
The document discusses the conceptual design of the electrical power system for a proposed 80MWe CANDU small modular reactor. It outlines the objectives, loads, requirements, and evaluated power sources. It determines that a microgrid powered by 2 or more diesel generators would satisfy reliability needs for Class IV power, while a single diesel generator could provide Class III power due to meeting reliability, availability, and startup time requirements. The conclusions recommend this configuration for the conceptual electrical system design.
Sandeep Singh is an electrical engineer with over 5 years of experience in project execution, planning, site management, maintenance, and commissioning of electrical systems for oil, gas, petrochemical, chemical, and power plants. He is currently working as a Project Executive Engineer at UPL Limited, coordinating technical reviews, procurement, inspections, and site execution. Previously, he worked at Reliance Industries on projects including a 220kV switchyard expansion and a 300MW coal-fired power plant. He is proficient in engineering software, electrical codes, and has safety certifications.
Rejith.N.R has over 10 years of experience in electrical testing, pre-commissioning, and commissioning of power projects and substations in Qatar. He currently works as a Testing Foreman for Qatar Engineering and Construction Company, overseeing testing and commissioning jobs. Some of his major projects involve work for Qatar Gas, RasGas, Qatar Fertilizer Company, and offshore platforms.
This document is a project report on the Kota Super Thermal Power Station submitted by Shri Akash Bhai Sundarkand Wale for their Bachelor of Technology degree. It provides details of the power station, which has four stages with a total generation capacity of 1,045 MW. It describes the key components of the power station including the coal handling plant, boilers, steam turbines, generators, transformers and other electrical equipment. The report also includes figures and tables providing technical specifications of the various equipment.
(1) Granada Green Energy provides clean energy and infrastructure solutions in the USA, Pakistan, Saudi Arabia and MENA region utilizing natural gas, biogas and waste-to-energy technologies.
(2) They design, install and operate natural gas fueling infrastructure for transportation, power generation and marine vessels, as well as combined cooling, heating and power systems and biogas and wastewater treatment facilities.
(3) Their energy solutions are based on Capstone microturbine generators that efficiently convert natural gas to electricity with overall system efficiencies up to 90% when paired with absorption chillers.
This document contains the resume of Onyejose Chukwuma, an electrical engineer with over 7 years of experience in high voltage, medium voltage, and low voltage electrical installations, testing, commissioning, operations, and maintenance of electrical projects. He has worked as a central control room operator and shift lead/control room operator at two power plants in Nigeria. His experience includes operating gas turbines, diesel generators, switchgear, transformers, and more. He holds several professional certifications in safety and gas turbine operation and maintenance.
The 132kV transmission line connection to Boggabri Coal Operations was the first of its kind for a coal mine in NSW. It included a 15km transmission line, switching station, and substation to supply the mine's increased power demands of up to 8MVA. While innovative, the project faced challenges integrating the transmission-oriented design with the mine's operations. Collaboration between the transmission and mining industries was needed to address differences in design philosophies, protection schemes, and isolation procedures. Key outcomes included agreements on equipment isolation, communication protocols, and training to safely operate the shared infrastructure.
Solar Power Engineering & Operation Maintenances krishna mohan
Krishna Mohan is seeking assignments in project management or operations and maintenance in the power industry, preferably related to power generation, project management, or energy management. He has over 6 years of experience working on solar and wind power projects totaling over 1,250 MW in capacity. His experience includes project design, procurement, execution, commissioning, and operations and maintenance. He is currently working as an Assistant Manager on the development of a 150 MW solar park project in Vadodara, Gujarat.
Muhammad Kashif Rafiq is an electrical engineer with over 10 years of experience testing and commissioning substations in Saudi Arabia. He is currently a Testing & Commissioning Engineer at Hyundai Heavy Industries Co Limited in Al Shuqaiq, KSA, where his responsibilities include testing various switchgear equipment, transformers, generators, and more. Previously, he worked as a Testing & Commissioning Engineer and Site Electrical Engineer in Saudi Arabia, and held electrical supervisory and technician roles in Pakistan. He is seeking new opportunities that utilize his strong technical and management skills.
Derek McWhirter is an advisory engineer with extensive experience designing, implementing, and commissioning control systems for oil and gas production and processing facilities, power generation equipment, and industrial plants. He has proficiency with many PLCs, HMIs, and other control devices, as well as software to configure them. Representative projects include control system upgrades and additions for Chevron, Dow Chemical, HESS, Frito Lay, Solae, NASA, Marathon, Unocal, and Solar Turbines facilities.
This report describes the development of a power conversion system for a floating tidal stream generator called the Evopod. A prototype Evopod will generate 25kW and test the effects of the marine environment. Optima Control Solutions designed power conversion equipment including a regenerative power converter, transformers, cables, and control systems to maximize power generation at different tidal flows and minimize transmission losses. Extensive simulation and dynamometer testing validated the design's performance before sea trials.
Syed Salman Ali is seeking a senior techno-managerial position. He has over 8 years of experience working as a chiller operator and plant room maintenance helper for various organizations such as Aga Khan University Hospital, Dolmen Mall Clifton, and Liberty Energy (Pvt) Ltd. He has technical qualifications in refrigeration/air conditioning and computer hardware & networking.
Muhammad Zubair has over 6 years of experience working in various roles at MCB Bank Limited, currently as a Branch Manager. He holds an MS in Finance, MBA in Finance, and B.Com. Zubair seeks a challenging career opportunity in the corporate sector to allow for growth. He has received awards for his work and completed specialized trainings in areas such as internal controls, cyber crimes, and time management.
Amin Owrangi has over 10 years of experience in water resources engineering, climate change impact assessment, and spatial data analysis. He holds a PhD in Civil Engineering from the University of Western Ontario. His skills include hydrology, irrigation engineering, GIS, remote sensing, and using software such as ArcGIS, Python, and Matlab to perform spatial data analysis and watershed modeling. He has worked on projects in Canada assessing climate change health impacts and flood risk mapping, as well as consulting projects in Iran related to watershed management, drought monitoring, and hydraulic structure design.
This document contains contact information, personal details, objectives, education history, certifications, work experience, projects, and skills of Syed Salman. It details his address, phone number, email, father's name, date of birth, objective to obtain a position in a reputed organization, education including a DAE in Associate Engineering and Matriculation, certifications in Electronics and PC Hardware, work experience including 3 years in CCTV systems and 1 year as an Electrical Technician, projects in UPS, PABX, microcontrollers, and skills in learning new skills, teamwork, communication, and analytical thinking.
Syllabus [Gerontology (GTY-154 A) - Aging in American Society]Muhammad Amin
This document provides information about a course titled "Aging in American Society" including the instructor details, course description, goals, objectives, assignments, and grading criteria. The key points are:
- The course is an introductory social gerontology course that will provide an overview of aging from individual, social, and global perspectives.
- Students will learn about aging through multiple disciplinary lenses like biology, psychology, sociology, and public health.
- Major assignments include quizzes, an individual presentation on an aging topic, and a final paper on the presented topic.
- The course aims to help students understand aging concepts and articulate aging issues from an interdisciplinary approach.
The document is an excerpt from Sun Tzu's classic work "The Art of War". It discusses five constant factors to consider in warfare: moral law, heaven, earth, commander, and discipline. Sun Tzu explains that victory depends on comprehensive planning and understanding of these factors, including assessing relative strengths and weaknesses between one's own army and the enemy's forces. A key to success is remaining unpredictable through disguise and misdirection, while maintaining solidarity and order within one's own troops.
Omer Nazir is seeking a challenging position in a dynamic organization. He has a Bachelors degree in Electrical Engineering from Preston University Islamabad and over 5 years of experience working in networking, physical security, and electrical engineering roles in Saudi Arabia and Pakistan. His experience includes installing IP and analog cameras, access control systems, networking equipment and more. He is proficient in several security and networking brands and holds computer and technical certifications.
Ammad Hussain Alvi is a chemical engineer with 6 years of experience working in oil and gas process engineering. He currently works as a Process Engineer for SMEC Oil & Gas in Pakistan, where he has contributed to projects including gas processing facilities and hydrocarbon dew point control units. Previously, he worked for 4 years as a Process Engineer for DESCON Integrated Projects, where he supported various projects in areas like flare recovery, oil and gas development, power plants, and CO2 recovery. He has extensive skills in process simulation, equipment design, hydraulics, and project management.
This document contains the curriculum vitae of Rizwan Ullah, who is seeking a position in the instrumentation and control field. It outlines his career objective, current profile working as an instrumentation operation and maintenance senior technician for Oilserv EPF in Kurdistan Iraq. It also details his previous work experience with various companies in Pakistan, Bangladesh, and Iraq since 1997. His responsibilities, skills, education, and personal details are provided.
This document is a resume for Ali Raza Yunas, a mechanical engineer from Dubai, UAE seeking a career in manufacturing, welding, fabrication or production management. It outlines his relevant work experience including roles as a technical engineer designing machinery, a mechanical maintenance engineer, and assistant engineer. It also lists his core qualifications such as knowledge of machinery, manufacturing processes, and ability to maintain quality and safety standards.
Muhammad Najam has over 13 years of experience in the oil and gas industry as a well logging while drilling engineer and petroleum geologist. He has worked for Baker Hughes and Weatherford in Qatar and Pakistan, logging exploration and production wells. He has a Master's degree in geology and is proficient in well logging tools, data analysis, and formation evaluation to interpret reservoirs and drilling operations.
- Muhammad Naeem is a Pakistani national seeking a position in a growth-oriented organization where he can contribute effectively and learn new skills.
- He has over 3 years of experience as an electrical technician/supervisor at ENI Pakistan and Elite Engineering Limited, where he performed various electrical maintenance and repair tasks on equipment like generators, transformers, motors, and more.
- His technical skills include working with electrical diagrams, testing equipment, circuit breakers, and computer programs like Microsoft Office. He has also received safety and health training.
Baber Hayat Khan Ali Zai is seeking a career position in engineering with opportunities for professional development. He has over 10 years of experience working in electrical projects in Qatar, Pakistan, and Saudi Arabia. His experience includes installing cables, panels, transformers and switchgear for various industrial plants and refineries. He is proficient in both English and Urdu.
This document is a curriculum vitae for Islam Nabil Abd El Fattah Ibrahim. It provides personal details such as his name, date of birth, marital status, and contact information. It also lists his educational background including a Bachelor's degree in tourism from Monofia University in Egypt. Work experience includes several roles as a reservation sales agent between 2010-2013 at hotels in Egypt and Saudi Arabia. Computer skills and languages spoken include English, Arabic, and German. The objective is seeking a challenging position in a reputable organization.
This document contains a summary of Riaz Hussain's work experience and qualifications. He has over 7 years of experience in pipeline, piping, and structural fabrication projects for oil and gas companies. His roles have included site engineering, piping engineering, quality assurance, and maintenance work. He is currently working as a site engineer in Saudi Arabia on fabrication, installation, inspection, and testing of piping systems.
This document contains personal and professional details of an individual named Fazal Rahim who currently works as a Senior Drilling Fluids Engineer at Oil & Gas Development Company Limited (OGDCL) in Pakistan. It includes contact information, education history, 15 years of experience in drilling fluids, training courses attended, international trainings, drilling fluid systems experienced, drilling challenges encountered, and achievements. It also lists computer skills and a detailed work experience timeline at OGDCL since 2009 as a Senior Drilling Fluids Engineer, monitoring and controlling fluid operations at rig sites.
Muzafar Ali Shah is a production operations engineer with 3 years of experience at OMV oil and gas in Pakistan. He currently works at the Sawan Gas Field in Khairpur Mirus, Sindh, Pakistan, where his responsibilities include monitoring gas and condensate processing equipment, ensuring safe plant operations, and preparing daily production reports. Muzafar holds international certifications in gas processing, oil production, pipeline operations, and process safety from courses taken in Romania, Austria and Pakistan. He has a Bachelor's degree in Petroleum Engineering and additional on-the-job certifications equivalent to a Master's degree in production operations from OMV's training program.
Iqbal Abdul Majeed Bandey has over 19 years of experience, including 16 years in Kuwait. He holds a B.E. in Electrical Engineering from Bangalore University in India. His current role is as Project Manager and Lead Electrical & Maintenance Engineer at Safwan Petroleum Technology Company in Kuwait, overseeing the operation and maintenance of gas turbines. He has extensive experience maintaining and commissioning electrical systems including high voltage equipment, generators, switchgear, and motors.
Tanveer Ahmed Niazi is applying for a senior planning engineer position. He has over 35 years of experience in engineering roles, including senior planning engineer, planning engineer, and electrical engineer. He is seeking to make positive contributions to organizational growth through his skills in project planning, scheduling, cost management, and risk mitigation. Niazi has extensive experience developing project schedules and managing projects across various sectors in multiple countries.
Muhammad Fiaz has over 30 years of experience in engineering and operations for oil and gas facilities. He currently holds the position of Vice President of Operations Engineering Support at ZADCO in Abu Dhabi, where he manages four engineering teams. Prior to this role, he held several engineering and management positions with ZADCO, Flour Daniel, and Descon Engineering working on projects in Pakistan, Saudi Arabia, the UAE, and the US.
INSTRUMENTATION ENGINNER - QC INSPECTOR ARAMCO SAP 70013071Nithy Anantham
This document is a curriculum vitae for P. Nithyanantham that provides details about his objective, qualifications, technical skills, and work experience in the oil and gas industry. It summarizes his Bachelor's degree in Electronics and Instrumentation, eight years of experience in maintenance, inspection, and testing roles, and previous positions as an instrumentation quality control inspector and maintenance engineer. The CV lists his responsibilities in these roles and highlights projects with Saudi Aramco and other oil and gas clients.
Krishnaprasad Keekan Kamalaksha is an electrical engineer from India seeking a senior position. He has 9 years experience in electrical design, engineering, procurement, construction and commissioning of power systems for oil, gas and petrochemical plants. His experience includes projects in Saudi Arabia and India. He is proficient in engineering software like ETAP, AutoCAD and has a Bachelor's degree in Electrical Engineering.
AR.Mohamed Iqbal is an electrical engineer with over 10 years of experience in testing and commissioning electrical equipment from 415V to 400KV, including AIS and GIS substations. He has worked on numerous power plant and grid substation projects in countries like the UAE, Saudi Arabia, Bangladesh, and India. Currently, he works as a Senior Electrical Engineer for Korea Hydro & Nuclear Power Co. at the BNPP nuclear power site in Abu Dhabi, UAE.
Zaheer Ahmed has over 10 years of experience as an electrical engineer working on EPC projects and maintenance shutdowns in oil, gas, and petrochemical plants. He holds a Bachelor's degree in Electrical Engineering. Currently he works as a Deputy Manager for Descon Engineering in Pakistan, where he is involved in managing the EPIC New Khanki Barrage Wazirabad project. Prior to this he worked in Saudi Arabia and Qatar on various projects for companies like Saudi Chevron, Descon Engineering Qatar, and Al Yusr Industrial Contracting Co. His responsibilities have included project management, planning, cost estimation, procurement, and overseeing installation and commissioning activities. He has specialized experience in substations, switchgear
V. Venkateswara Rao is applying for the position of DGM/AGM at Power Projects. He has over 16 years of experience in electrical engineering for power plant projects, operations, and maintenance. His most recent experience includes successfully commissioning various cogeneration power plants. He is currently working as Senior Manager of Electrical and Instrumentation at a thermal power plant project to erect 2 x 38.5 MW power units. He holds a B.Tech in electrical engineering and has extensive experience managing electrical systems for multiple power and industrial projects in India and Iran.
Amol Bakane has over 12 years of experience in electrical engineering projects for oil and gas refineries, power plants, IT buildings, and other industrial and commercial complexes. He has expertise in electrical design, planning and execution of projects from start to commissioning. Some of his responsibilities include preparing designs, estimates, tender documents, supervising installation of equipment like transformers, generators, switchgear, bus ducts. He also ensures quality control, safety compliance, coordination with other teams and clients.
N. Mohan Raj has over 15 years of experience in electrical and instrumentation engineering roles. He is currently the Manager of Electrical and Control and Instrumentation Operations and Maintenance at Sasan Power Limited, where he oversees the stabilization of various coal conveyor and handling plant systems. Prior to this, he held roles with increasing responsibility at various thermal power and solar power plant projects.
R. Anbarasan is an electrical engineer with over 8 years of experience commissioning electrical equipment. He has commissioned substations, industrial equipment, and power plants. He is currently a Senior Engineer Electrical for testing and commissioning in Abu Dhabi. He holds a Bachelor's degree in Electrical and Electronics Engineering and is seeking a challenging position to utilize his skills and experience.
Muhammad Asim seeks to utilize his 7 years of experience as an electrical engineer to provide professional growth through new opportunities and challenges. He has experience designing, testing, and maintaining high voltage electrical systems including substations, switchgears, and power plants. He is proficient in AutoCAD, Microsoft Office, and testing and commissioning various electrical equipment.
The document provides a summary of Muhammad Shahzad Akbar's work experience and qualifications. It details his over 3.5 years of experience in electrical engineering, including installation, commissioning, operation and maintenance of power generation equipment. It also lists his responsibilities managing electrical systems, instrumentation, utilities and staff at various power plants and airport facilities.
The document provides a resume for Osama Youseef Dwedar, an electrical design engineer with over 10 years of experience in designing electrical systems for various industrial, commercial and infrastructure projects. It details his educational background and work experience designing electrical systems for power plants, substations, wastewater treatment plants, district cooling plants and more. It also lists software skills and internship experiences relevant to electrical engineering design.
Wathiq Alanbaki is seeking a position in power and energy systems. He has a Master's in Electrical Engineering from NJIT with a focus on power and energy systems. His experience includes over 10 years as a project engineer working on electrical substations, power distribution systems, and renewable energy projects. He has extensive experience designing, testing, and commissioning high voltage power systems and has managed projects in the US, Jordan, and Iraq.
This document provides details about Gadi Rama Rao including his contact information, nationality, date of birth, qualifications, and extensive work experience over 28 years in India and Saudi Arabia. It outlines his roles in maintenance, procurement, project management, and commissioning of electrical, instrumentation and control systems for various oil, water and wastewater treatment plants.
Arulmani Dhandabani is an experienced Commissioning and Maintenance Engineer with over 11 years of experience in MEP projects and petrochemical industries. He currently works as an Electrical Commissioning Engineer for Al Jaber Engineering in Qatar. Previously, he has worked for Saint Gobain Glass India and Southern Petro Chemical Industries Corporation in various electrical roles. He has extensive experience in commissioning, testing and maintenance of electrical equipment including transformers, motors, switchgears, UPS systems and power plants.
The document provides a summary of Mahboob Iqbal's career experience and objectives. It outlines over 13 years of experience in project planning, construction supervision, inspection, and commissioning of electrical and instrumentation projects in various industries. It also lists his major capabilities in project execution, testing and commissioning, maintenance, and instrumentation. His most recent role was as an E&I Construction Support Supervisor for a gas treatment plant project in Pakistan.
This resume summarizes the experience and qualifications of Chandrashekhar Uppar:
- 19 years of experience in electrical and control engineering projects for power plants, compressors, and dryers, including design, testing, and commissioning of control panels, switchyards, and automation systems.
- Educational background includes an AMIE in Electrical Engineering and a diploma in Electrical Engineering.
- Technical skills include design of high voltage and low voltage panels, control system programming, and site testing/commissioning. Major projects include turbine generator sets, compressors, and air dryers for various industries.
S. Ramkumar has 17 years of experience managing electrical operations and maintenance as Chief Manager at a cement plant in South India. He holds a B.E. in Electrical and Electronics Engineering and certifications in energy management and auditing. Ramkumar oversees a staff and is responsible for project management, budgeting, maintenance, and energy conservation activities at the plant. He has led several electrical retrofitting projects and system implementations involving switchgear, motors, drives, and substations.
Ajit Kumar is a senior electrical engineer with over 26 years of experience in electrical power system protection, design of industrial plants, power plants, and substations. He is currently working as a Senior Protection Engineer at Tebodin in Muscat, Oman and is looking for a position as a Principal Engineer in Electrical Power System Protection. He has extensive experience in protection design, relay setting, standards, software, and maintenance.
This document is a curriculum vitae for Mohamed Asif Haneer. It summarizes his 26 years of experience in project management and commissioning of power plants and substations. It lists his educational background in electrical engineering and highlights some of his major achievements in quickly completing large power projects on time and under budget. It also provides details of his technical skills and roles on several power generation and transmission projects in Saudi Arabia over the past 20 years.
This curriculum vitae provides information on Ahmed Abd-El Hady Abd-El Sattar, an Egyptian electrical engineer seeking a project manager position. It details his educational background, including a BSc in electrical engineering from Cairo University. It also outlines his extensive career history working as a site/construction manager and site manager on numerous substation projects in Saudi Arabia between 2008-present. His roles involved overseeing the installation, testing and commissioning of high voltage electrical equipment.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Wajid Ali Shah
1. Eng’r Wajid Ali Shah
Registered Electrical Engineer
Saudi Council of Engineers (SCE)
PEC Reg. No Elect/25575(Professional Engineer)
Address: House#116, street#7, sector#E-11/1 Islamabad Pakistan
Permanent address: House#116, street#7, sector#E-11/1 Islamabad Pakistan
Skype ID: wajid_bemco
Mobile Phone #s: +92-3339390314
Email: engr_wajid85@yahoo.com
EXPERIENCE: Above 10 Years of Experience
Engineering Procurement Construction Commissioning Operation / Maintenance of Substations
,Combined Cycle Power Plants, Multi-stories Buildings & Hospitals.
Highly Energetic, Result Oriented Professional. Achievement Driven Experience, with Exceptional
Leadership, Communication and Vision Skills
Specialties: Power Generation ( Gas Turbine Power Plant, Steam Turbine Power Plant & Combine Cycle Gas
Turbine and BOP ), Boiler/HRSG - Desalination Plant - Oil & Gas - Integrated Waste to Energy
Plant. Substations, Building Projects.
.
May15 ~ to date Ministry Of Housing & Works
Consultant Engineer
• Scope: Bidding Documents Preparation and evaluations:
• Maintain complete updated purchasing records/data and pricing in the system.
• Coordinate with suppliers to ensure on-time delivery.
• Responsible for the preparation and process purchase orders and documents in accordance with
company policies and procedures.
• Monitor and co-ordinate deliveries of items between suppliers to ensure that all items are delivered
to site/store on time.
• Source, select and negotiate for the best purchase package in terms of quality, price, terms,
deliveries and services with suppliers.
• Purchase and issue order in accordance to specification.
• Follow-ups and co-ordination for timely delivery.
• Receiving of BoM, Indents, Drawings, etc
Oct ’11 ~ May15. SHANDONG Electric Power Construction Corporation – SEPCOIII
Ras Al Khair Combined Cycle Power Plant, 2400 MW, Water desalination Plant & 380KV
substation, Kingdom of Saudi Arabia
Senior Design E&I Engineer
Scope: Working as a main contractor and responsible for design, FEED, detail engineering, shop
drawings preparations, Site Observation reports issuance, Handover documents i.e.
ECC,SCC,MCC,CCC,PAC & FAC preparations and reviewing. Carrying out site inspections with
Client engineers. Quality documents follow-up like NCR, RFI’s, MAR, MRIR, FAT& As-built
drawings preparations and reviewing. Attending factory acceptance tests for electrical equipment’s
1
2. prior site shipment & installations. Participating all the coordination meetings among client,
consultants and vendors. Preparation biddings BOQ’s of sub-contractors and reviewing quotations.
Daily coordination with project management and stack holders. Site erection supervision.
The combined cycle power plant consists of 10 Gas Turbines, ten HRSG’s and five
(5) Back pressure Steam Turbines in five combined cycle blocks.
Two (2) gas turbine units and one (1) steam turbine unit are forming a
“Combined cycle Block “. In addition, there is a Simple Cycle Block comprising of two (2) nos.
Simple Cycle Gas turbines. Total Power generated by combination of Twelve (12) nos.
260 MVA Gas Turbine Generators at 18kV and Five (5) nos. 213MVA steam Turbine Generators at
16.5 kV Generation voltage stepped up to 380kV through dedicated Generator Step-up
Transformer for evacuation of power through 380kV Gas Insulated Substation.
The gas turbine and steam turbine generators connected to 380 kV Gas Insulated
Substation via generator step up transformers and 380 kV cables. Each Gas Turbine
Generator rated 260 MVA (at 40 ºC ambient air temperature ), 18 kV, 60 Hz, 3600 rpm, 0.85
power factor, Air Cooled. Each Steam Turbine Generator rated 213 MVA (at 46 ºC ambient
air temperature ), 16.5 kV, 60 Hz, 3600 rpm, 0.85 power factor, Air Cooled. Generator
circuit
breaker and unit auxiliary transformers is provided for each.
Design calculation of transformers, breakers, motors etc. procurement order as per approved
design. SLD Designing, calculation, BOQ dragging.
Applying design knowledge in power distribution, grounding, lighting, control systems, and
equipment specification and selection. Following with all the actors (i.e. consultant, contractor,
clients, and end users) to finalize and close all approvals. Monitoring the progress of the projects
and make necessary adjustments to ensure successful completion. Preparing electrical designs for
large scale industrial projects. And worked on measurement and control equipment’s. Fire Fighting
systems (Deluge Fire, water spray, Sprinkler, Co2 and Organ).PAGA System commissioning and
installation. Gas Detection Systems and complete test and maintenance reports. Troubleshooting
and testing of various types of process control instruments and relay logic, which include
pneumatic, electrical and electronic instruments. Having experience on PLC’s and DCS systems.
Compliance of manufacturer O/M Manuals at erection. Issuance of Design review note (DRN),
Comment review sheets (CRS) & as-built drawings.SLD Calculations.
Oct. ’10 ~ Sep. ’11 Arabian BEMCO Contracting Co., Ltd.
Qurayyah Combined Cycle Power Plant, 3190MW, Kingdom of Saudi Arabia
Electrical Project Engineer
Responsible to monitor the electrical installations as well as coordination with civil & mechanical
teams at site - EPC Project
Detail is as under;
1) The OCGT power plant a nominal rating of 1890 MW, based on 15 GE 7FA gas
turbines rated at 126 MW per unit.
2) The conversion to a CCGT power plant based on five (5) blocks, each block
comprising of 3 GTG + 1 STG, result in a CCGT net power output of approximately 3190 MW
with an expected rating for each of the STGs of approximately 260 MW
3) Installation of HRSG and STG’s for CCPP with associated mechanical,
instrumentation and control equipment and all necessary supporting services which is
required to convert the OCGT power plant to a CCGT power plant.
4) Generator step-up transformer installation.
5) Installation of 4.16KV unit switchgear.
6) Installation of 125V DCDB.
7) Installation of 120V AC UPS.
8) Installation of 120V UPSDB.
9) Installation of battery cell for UPS system.
10) Installation of battery chargers.
2
3. 11) Installation of Paging system/Public Address/telephone &clock system.
12) Auxiliary power supplies, including MV and LV boards,switchgear, MCCs and
distribution boards.
13) Essential supplies including batteries and UPS system.
14) Protective relaying and metering systems including CTs and VTs.
15) Lighting and small power systems and equipment.
16) MV and LV power, instrumentation and control, telephone and emergency cabling
systems.
17) Earthing.
18) Lightning and surge protection.
19) instrumentation.
20) Cable trays & cable ladders installation.
21) Cable pulling & termination.
22) Desalination and water treatment plants.
23) Installation of instru/service Air compressor building.
24) Boiler feed pumps installation.
25) Desalination units’ installation.
26) Familiar with Plant Direct Current System (DC) like Chargers, Converters, Batteries,
Distribution System.
27) Experience of Plant Un Interruptible Power Supply System (UPS).
28) Familiar with Maintenance of MV / LV Motor and MOVs.
29) Understanding of Protection Relay.
30) Through understanding and comfortable while working at the starting and Excitation
System of the Power Generators i.e. Static Frequency Converter (SFC) & Static Excitation
Equipment (SEE) Systems.
Apr. ’09 ~ Sep. ’10 Arabian BEMCO Contracting CO. Ltd.
Riyadh Power Plant PP # 10, 2000MW, Kingdom of Saudi Arabia
Engineer – Electrical & Instrumentation
Engineering, Design, Detail Engineering, FEED, Procurement, Construction / Commission of
Combined Cycle, 7 FA Frame,126 MW x 18 GE Gas Turbines, connected to, 260 MW x 06
STG, through, 18 HRSG, at 3190MW QURAYYAH Combined Cycle Power Plant # 2,
QURAYYAH, Client: SEC, Kingdom of Saudi Arabia.
As Electrical Lead - organized Test Packages submittals to Client: SEC, for Erection
Completion Certificate (ECC).
Engineering, Design, Detail Engineering, FEED, Procurement, Construction / Commission of
Simple Cycle, 7 EA Frame, 56 MW x 36 GE Gas Turbines, at, 3000MW RIYADH Power Plant
# 10, Riyadh, Client: SEC, Kingdom of Saudi Arabia. It is a World Largest Power Plant running
on Crude Oil Responsible to monitor the electrical equipments installations as well as
construction of civil & mechanical works on sites as per drawings.
Detail is as under.
1) Riyadh PP10(Power Plant) project 3.5 billion USD, 36 gas turbine GE frame 7EA
power plant, 2000MW with a Tank Farm capable of holding 420,000m3 of diesel and crude oil.
2) Installation & operation of gas turbines & generators (56MW each) .
3) LV & MV Duct bank: layout of underground cables & cable routing
4) Cathodic protection system installation (transformer rectifier, anode junction box &
test box).
5) Installation of anode ribbons, power feed connection & reference electrodes for
cathodic protection system & its testing commissioning.
6) Lying out of earthing mesh.
7) Potential gradient control system.
8) MV 13.8 KV switchgears installation,
9) Familiar to work with earth resistance ohm meter, digital low resistance ohm meter.
10) Installation of street & fence lighting.
3
4. 11) Expert in Fire alarm system, firefighting stations.( FM200,FOAM,CO2 and Water
System). Following the standard of NFPA (National Fire Protection Association), installation of
NFS2-3030 FACP.
NFPA 12A Halon 1301 Extinguishing systems.
NFPA 13 Splinker systems.
NFPA 15 Water spray system.
NFPA 16 Foam/ Water deluge and Foam/Water spray system.
12) Fuel oil treatment plant.
13) Expert in Water treatment plant.
14) Installation of street light,pole light,fence light and highmast.
15) Grounding and lightning protection.
16) Maintenance of Power Transformers & Their Different Parts
17) Testing Transformer Oil, Lighting Arrester, Batteries & Three different tests of CT.
18) Working Principles of Different Control Penal.
19) High Voltage Lines Installation & Faults Detection
20) Transformer Relays (Differential relay, Distance relay, Buckle relay).
21) Operation, Maintenance & Installation of Current & Potential Transformers,
Isolators, Breakers & Capacitor Banks.
22) Fuel oil unloading and metering stations.
23) Installation of GIB (gas insulated bus duct)
24) Installation of HVAC system.
25) Erection and alignment of panels at foundations.
26) Installation of UPS system.
27) Public address system.
28) National Guard Building construction.
29) Maintaining quality management systems for both internal and external delivery of desi
gn project s.
30) Preparing material requisitions for MV + LV switchboards, transformers, UPS systems,
trace heating and other electrical equipment.
31) Capable to carry out technical investigations, produce technical reports, engineering
standards and procedures.
32) Reviewing of the drawings, specifications and Bills of Quantities.
33) Ensuring that the Electrical Designs are in-line with Company Design guidelines.
34) Making ensure that Electrical designs are value Engineered and cost efficient.
35) Making ensure that the Electrical Designs are in-line with the latest Authority
requirements.
Water & Power Development Authority – WAPDA / PESCO
Bannu, Pakistan (2007 to 2008)
Assistant Manager (2006-2008) & as trainee Engineer (2005-2006)
Worked at 132KV Grid Station Bannu, and was responsible for the followings.
1) Dismantling & Installation of line controlling equipment like Isolators, Circuit Breakers, Current
Transformers, Potential Transformers and their connectivity with main bus bars in case of
permanent faults.
2) Routine inspection of the grid station equipment i.e. Air Pressure, SF6 Gas Pressure of
Breakers, Oil level of C.T’s, P.T’s, Transformers, Counter reading of breakers, lightening
arresters, Visual inspection of C.T’s P.T’s.
3) To arrange the shut downs for routine maintenance (annually) and emergency maintenance
on Power Transformers/Breaker including washing and cleaning of insulator posts of C.T’s,
P.T’s & Transformer bushings. Toping up of oil level and when required for transformers.
Measurement of Contact Resistance of breakers, isolators, opening / closing timing of
breakers. Mechanical parts inspection and cleaning, greasing & lubrication. Verification of
local remote operation of all the equipment. Tightening of Nuts & Bolts, tightening of clamps &
structure. Replacement of spare parts, Gaskets, MCB & Magnetic Contactors if required.
4
5. 4) To keep the DC Battery Charger & Battery Sets healthy by checking its total voltage,
voltage/cell, electrolyte level, specific gravity, corrosion etc.
5) Earth resistance testing of all the equipment and structure on half-yearly basis.
6) Coordinate with management in case of tripping or damage caused to any equipment.
EDUCATION ACADEMIC
• Bachelor of Science in Electrical Engineering (BSEE) >SESSION (2007-2008)
NWFP University of Engineering & Technology, Peshawar, Pakistan
AFFILIATION PROFESSIONAL
• Registered (Electrical) Engineer, with Saudi Council of Engineers, Riyadh,
Kingdom of Saudi Arabia, (SCE #: 80806)
• Registered (Electrical) Engineer, with Pakistan Engineering Council, Islamabad, Pakistan
(PEC #: ELECT - 25575).
• Member, Institute of Engineers, Pakistan.
TRAINING PROFESSIONAL
• OSHA – 30 Hours, Training at Arabian BEMCO Co. Ltd., KSA
SKILLS EXPERTISE
• Inspection, EPC, Project Engineering, Combined Cycle Power Plants,
Construction, Engineering, Project Control, Materials, Tanks, QAQC, Plant Maintenance,
Human Resource Management, OSHA 30 Hours, Leadership, Grid Station, HAZOP, Gas
Turbines, Steam Turbines, Turbines, HRSG / Boilers, Technical Reports, Petrochemical,
Commissioning, Refinery, Onshore, Petroleum, Personnel Management, Refineries, P&ID,
Procurement,
• English
• MS Windows / XP / 07, MS Office, MS Project, Auto CAD, Visio, Primavera Contract Manager
DATA PERSONAL
• Date of Birth January 01, 1985
• Marital Status Married - One Son
• Languages English, Pashto, Urdu. Arabic
• Pakistan National Identity Card # 11101-6112558-3
• Pakistan Passport # JF5145582
• Pakistan Driving License Yes
• Saudi Driving License Yes
5
6. 4) To keep the DC Battery Charger & Battery Sets healthy by checking its total voltage,
voltage/cell, electrolyte level, specific gravity, corrosion etc.
5) Earth resistance testing of all the equipment and structure on half-yearly basis.
6) Coordinate with management in case of tripping or damage caused to any equipment.
EDUCATION ACADEMIC
• Bachelor of Science in Electrical Engineering (BSEE) >SESSION (2007-2008)
NWFP University of Engineering & Technology, Peshawar, Pakistan
AFFILIATION PROFESSIONAL
• Registered (Electrical) Engineer, with Saudi Council of Engineers, Riyadh,
Kingdom of Saudi Arabia, (SCE #: 80806)
• Registered (Electrical) Engineer, with Pakistan Engineering Council, Islamabad, Pakistan
(PEC #: ELECT - 25575).
• Member, Institute of Engineers, Pakistan.
TRAINING PROFESSIONAL
• OSHA – 30 Hours, Training at Arabian BEMCO Co. Ltd., KSA
SKILLS EXPERTISE
• Inspection, EPC, Project Engineering, Combined Cycle Power Plants,
Construction, Engineering, Project Control, Materials, Tanks, QAQC, Plant Maintenance,
Human Resource Management, OSHA 30 Hours, Leadership, Grid Station, HAZOP, Gas
Turbines, Steam Turbines, Turbines, HRSG / Boilers, Technical Reports, Petrochemical,
Commissioning, Refinery, Onshore, Petroleum, Personnel Management, Refineries, P&ID,
Procurement,
• English
• MS Windows / XP / 07, MS Office, MS Project, Auto CAD, Visio, Primavera Contract Manager
DATA PERSONAL
• Date of Birth January 01, 1985
• Marital Status Married - One Son
• Languages English, Pashto, Urdu. Arabic
• Pakistan National Identity Card # 11101-6112558-3
• Pakistan Passport # JF5145582
• Pakistan Driving License Yes
• Saudi Driving License Yes
5