Livewire Automation was contracted by WDS to provide electrical and instrumentation commissioning services for the Arrow Energy Daandine Expansion Project in Queensland. The scope involved the installation and commissioning of multiple compressor packages, metering stations, and various system integrations, including PLC and DCS setups. Livewire's technicians performed extensive testing and start-up assistance for the newly installed equipment across the facility.

1. ARROW ENERGY / CPECC WDS JV
Daandine Expansion Project
Electrical / Instrumentation / &
Commissioning Services provided by Livewire
Automation
Dalby, Surat Basin Queensland
Electrical and instrumentation
Livewire Automation was engaged by WDS to
perform the electrical and instrumentation
commissioning scope for the expansion and tie in
of three Ariel reciprocating compressors, one
Generation package, contactor tower, glycol filter,
fuel gas and buffer vessel, inlet coalescer, oil filter,
inlet separation boot and production facility flow
lines. Livewire Automation assisted CEC Electrical
with the electrical and instrumentation installation
for the new compressor packages including
hazardous area auditing, UCP and MCC
installations. Livewire Automation E&I technicians
performed all MCC testing, hazardous area
inspections, instrument inspections, cable tests,
and earth grid tests. All test equipment was
supplied by Livewire Automation.
Electrical & Instrumentation Scope
 Modifications to existing MCC-001
 Installation of new MCC-002
 Installation of power, control and fibre
optic cabling to on-skid junction boxes for
the three new compressors, TEG, Glycol,
Fuel and Oil vendor supplied packages
 Re-assembly of compressor packages
including the installation of unit control
panels and two MCC’s to each package
 Installation of instrumentation, electric
motors and associated pumps for the
produced water transfer package
 Modifications to Braemar 1 and 2
metering stations
 Relocation and re-verification to the
moisture analyser
 Plant instrumentation and calibrations
 Installation of new flame detectors and
plant emergency sirens
 New VSD’s for TEG package
 Installation of local control stations
 Modifications to existing plant lighting
and installation of new plant lighting
 Plant earthing
 Cable ladder
Commissioning
Livewire Automation was engaged by WDS to
perform the commissioning scope of the Arrow
Energy Daandine expansion project. The scope
included electrical energisation of new and
existing equipment, instrumentation loop checks,
PLC / DCS integration, motor bumping and
alignments. Livewire Automation assisted with
start-up of the new TEG and 3 compressor
packages and 22 wells in the gathering network.
Commissioning Scope
 Cause and Effect Testing
 Functional Instrument Loop Testing
 Allen Bradley PLC Modbus Mapping
 Emerson PLC and Delta V HMI Modbus
Mapping
 MCC Energisation
 Commissioning of three CAT 3612 engines
coupled with Ariel 4 stage reciprocating
compressors, full function testing
including cooler fan, alternator, MCC and
PLC functional testing
 Flare control panel commissioning
 TEG Dehydration package commissioning
 Motor bump testing
 Motor coupling alignments
Case Study
Oil & Gas
Facilities & Pipelines