The document provides a summary of Muhammad Shahzad Akbar's work experience and qualifications. It details his over 3.5 years of experience in electrical engineering, including installation, commissioning, operation and maintenance of power generation equipment. It also lists his responsibilities managing electrical systems, instrumentation, utilities and staff at various power plants and airport facilities.

1. Muhammad Shahzad Akbar
PEC # ELECT/40142
E&I Engineer
Contact No.:+92346-7113140/ +92333-0453553
E-Mail: shahzad.akbar87@gmail.com
PROFILE SUMMARY
 Graduate of Bachelor of Science in Electrical Engineering with more than 3.5 years of Experience in:
Operation& Maintenance, Electrical, Electronics, Automation & Instrumentation, Project Management &
Execution.
 Installation, Commissioning , Operation & Maintenance of TWO Coal Fired Boilers each 55 ton/hr, 5.3MPa,
490°c.
 Installation, Commissioning, Operation & Maintenance of Steam Turbine 12MW, 3000rpm, 4.9MPa, Double
Extraction & Condensate Mode.
 Installation, Commissioning, Operation & Maintenance of Alternator 15MW, 3000rpm, DVR Excitation System,
NARI Synchronization & Protection System.
 Operation and Maintenance of 3x1.5MW CAT 3516 Industrial Gensets. with 3x1875kVA, 50Hz, 1500RPM,
400V Alternator with Brushless excitation and Digital Automatic Voltage Regulator. .
 Installation, Commissioning, Operation and Maintenance of 2 x 1.6 MW CAT 3517B Diesel Gensets with
2x2000KVA, 50Hz, 1500RPM, 400V Synchronous Generators with Brushless excitation and Digital Automatic
Voltage Regulator.
 Installation, Commissioning and Troubleshooting of NARI NSC200NT SCADA Electrical Control & Protections
Monitoring system)
 Installation, Commissioning, Operation & Maintenance of DCS (SIEMENS PCS7, NT6000 DEH+ETS, PLC
(Siemens), BENTLEY NEVADA Turbine Protection System.
 Installation, Commissioning, Operation & Maintenance of Instruments (Temperature, Flow, Level and Pressure
Gauges/Transmitters, control valves, Analyzers) etc.
 Manages the plant’s operations, projects, and maintenance.
 Control on inventory, budget and compliance with safety regulations.
 Training of staff including Trainee Engineers, Supervisors, & trade workers.
 Development of Sequence of Procedures (SOP) for maintenance of E&I equipment’s according to ISO Standards.
 E&I BOQ's, study of P&ID, Installation, Commissioning and MBO’s (Management by Objectives).
 Well aware of Electrical Engineering Methodologies as well as the corresponding Equipments, materials,
consumables, tools and Manpower Allocations related to (HT & LT) Electrical Operation, Maintenance and
Installation Works.
 A keen planner, strategist & implementer with demonstrated abilities in Managing entire E&I (Electrical, Automation
and Instrumentation).
EMPLOYMENT DETAILS
Since October 2015 till date. Ingredion, Rafhan Maize Product. Co. LTD
Pakistan as E&I Engineer.
Working as E&I Engineer on coal fired power plant having capacity of 15MW Electricity Generation.
RESPONSIBILITIES:
ELECTRICAL:
 Scheduling, planning & executing jobs during the shift including Procurement, Contract Management &
Work order Generation.

2.  Preventive maintenance of E & I installations including Generators, Transformers, DCS system, VFDs, E
& I Control and Protection Cabinets, Motors, Instruments including control valves, transmitter, analyzers,
level transmitters and control system.
 In the main control room, monitor Power, Automation and Control System equipment for challenges to
integrity issues using Supervisory Control systems (SCADA) and Distributed Control System (DCS).
 Coordinate and supervise planned and emergent maintenance items, while ensuring timely completion and
adherence to industrial and electrical safety standards.
 Installation, Commissioning, Operation and Maintenance of 1 x 15 MW Synchronous Generator with
Brushless excitation and Digital Automatic Voltage Regulator.
 Operation and Maintenance of 3x1.5MW CAT 3516 Industrial Gensets. with 3x1875kVA, 50Hz,
1500RPM, 400V Alternator with Brushless excitation and Digital Automatic Voltage Regulator. .
 Installation, Testing, Commissioning, Operation and Maintenance of electrical equipments like
Transformers, Generator, LV / MV Switchgear Breakers, NGR panel, Protection Relays, Batteries, Motors,
Control and Protections etc.
 Hi-pot test of MV cables, Transformers and Generator, Meggar test of LV cables, LV panels and motors.
 Installation, Testing, Commissioning, Operation and Maintenance of Generator Protection & Synchronization
panels.
 Installation, Operation and Maintenance of VFD Panels of 2.2 to 315 KW
 Installation, Commissioning, Operation and Maintenance of Coal Handling, Coal Crushing & Conveying System,
Limestone Powder preparation.
 Installation, Commissioning, Operation and Maintenance of Boiler makeup water treatment plant, Cooling tower
& Circulating water system, electrostatic Precipitators with 72KV Rectifying Transformers.
 Installation, Commissioning and Maintenance of Siemens Power Transformers having rating of 10-13MVA, 20-
26MVA which includes: IR (Insulation test), No load test, Full load test, Impedance measurement test of power
transformer, Safeties testing of power transformer, Dielectric Insulation test of transformer oil.
 Thermo-graphy of whole plant electric joints.
 Installation, Testing, Commissioning, Operation and Maintenance of Public Address system, Fire Alarm and Fire
Protection system and CCTV Cameras system.
 Installation, testing and Maintenance of Earthing, Structural Grounding & Lightning Arrester system of whole
plant.
 Erection and commissioning of area lighting, equipment lighting and street light poles up to 500W.
INSTRUMENT & CONTROL:
 Installation, Operation and Maintenance of SIEMENS PCS-7 DCS of 2676 I/O’s at coal fired Power Plant w.r.t
hardware, software, logical working and communication.
 Installation, Operation and Maintenance of SCIYON NT6000 DCS for Turbine Safeties of 300 I/O’s like (Thermal
Expansions, Axial Displacements, Condenser Vacuum, Lube Oil Pressure and Temperatures, Thrust Pad and
Radial Tile Temperatures interlocks) at coal fired Power Plant w.r.t hardware, software, logical working and
communication.
 Installation, Operation and Maintenance of TSI (Turbine Supervisory Instrument System make Bently Nevada) like
(Tile Vibrations, Rotations, Turbine Over-speed) for Turbine Internal Safeties at coal fired Power Plant w.r.t
hardware and communication.
 Working on calibration, Installation and loop testing (regarding DCS) of all types of Field instruments (Pneumatic
and Motorized Control valves, Shut-off valves, Transmitters (level, flow, pressure, temperature), Switches
(pressure, level, position, vibration), Analyzers (P.H, Conductivity, Oxygen), Coal flow rate & totalizer system.
 Installation, Operation and Maintenance of Ignition Diesel Burner for Coal Fired Boiler startup.
UTILITIES:
Air Compressors (0.8MPa, 60 tons/hr), Cooling Towers (4800m3), Water Treatment Plant (60m3/hr), Coal
Crusher 100 tons/hr, ESP 110 tons/hr 3-Electric Fields 72KV, Ash Silo 40 tons/hr, Slag Disposal System 10 tons/hr,
Lime Stone Powder System 30 tons/hr in coal fired power plant.

3. Since July, 2013 to October, 2015 International Airport, Multan, Pakistan.
as Electrical Engineer.
RESPOSIBILITIES:
ELECTRICAL:
 Installation, Testing, Commissioning, Operation and Maintenance of 2 x 1.6 MW Caterpillar 3517B Diesel Gensets
with 2x2000KVA, 50Hz, 1500RPM, 400V Synchronous Generators with Brushless excitation and Digital
Automatic Voltage Regulator.
 Installation, Testing, Commissioning, Operation and Maintenance of electrical equipments like Transformers,
Generator, LV / MV Switchgear Breakers, NGR panel, Protection Relays, Batteries, Motors, Control and
Protections etc.
 Hi-pot test of MV cables, Transformers and Generator, Meggar test of LV cables, LV panels and motors.
 Installation, Testing, Commissioning, Operation and Maintenance of Generator Protection & Synchronization
panels.
 3x2.5MVA Power Transformers, (2x100KVA,2x300KVA,4x400KVA) Distribution Transformers, Power Factor
Improvement Pannels
 Installation, Testing, Commissioning, Operation and Maintenance of Public Address system, Fire Alarm and Fire
Protection system and CCTV Cameras system, FIDs (Flight Information Displays), Aeroplane Parking System
 Installation, testing and Maintenance of Earthing, Structural Grounding & Lightning Arrester system of whole
plant.
 Erection and commissioning of area lighting, equipment lighting and road light poles up to 500W.
UTILITIES:
Utility Building (2x1.6MW Diesel Generators), Passengers Terminal Buildings, Offices Blocks, Officers and Staff
Mess & Resendencies, Cargo Building, Passengers Car Parking & Aeroplanes Runway & Parking
EDUCATION
2013 B.Sc.(Electrical Engineering) (3.52/4.0 CGPA) University of Management and Technology (UMT), Lahore.
TRAININGS
 Six Sigma white belt & KAIZEN trained
 2 days training on Safety measures at Plant and Offices
 3 days training on Process Hazard Analysis and Risk Assessment
PERSONAL DETAILS
Date of Birth: 16th
April, 1987
Languages Known: English, Urdu
Nationality: Pakistani
Marital Status: Single