(1) Granada Green Energy provides clean energy and infrastructure solutions in the USA, Pakistan, Saudi Arabia and MENA region utilizing natural gas, biogas and waste-to-energy technologies. (2) They design, install and operate natural gas fueling infrastructure for transportation, power generation and marine vessels, as well as combined cooling, heating and power systems and biogas and wastewater treatment facilities. (3) Their energy solutions are based on Capstone microturbine generators that efficiently convert natural gas to electricity with overall system efficiencies up to 90% when paired with absorption chillers.

1. Granada Green Energy LLC
Delivering Clean and Efficient Energy & Infrastructure
Solutions In USA, Pakistan, Saudi Arabia and MENASolutions In USA, Pakistan, Saudi Arabia and MENA
Region
Overview
May 06, 2014
No part of this presentation may be circulated, quoted, or reproduced for
distribution outside the recipient organization without prior written
approval from the Granada Group of Companies

2. Make a significant contribution towards promotion of clean and
renewable energy through supply of consulting and project
development/management services as well as technology and
equipment for:
• Design, installation and operation of infrastructure and equipment for
utilization of natural gas fuel in the transportation, captive power, ships,
harbor tugs, supply vessels, barges and other floating craft
MISSION STATEMENT:
1
harbor tugs, supply vessels, barges and other floating craft
• Installation of environmentally friendly & efficient combined cooling,
heating and power - CCHP systems operating on natural and biogas.
• Design and Installation of high-tech digesters for production of biogas,
CNG (methane) for transportation sector, CO2 (dry ice) for use in food
industry and organic fertilizer from animal and agricultural wastes.
• Design and Installation of Facilities for Water de-salination, Recycling
and Industrial effluents treatment

3. INTRODUCTION
• Granada Green Energy (GGE) provides integrated energy
infrastructure solutions for gas, power and marine infrastructure
through their offices in Houston, Karachi and Jeddah.
• Granada Green Energy Inc. (GGE) provides services include projects
planning and implementation covering concept design, feasibility
studies, EPC & project management, commissioning, operation and
maintenance services.
• GGE provides Thermal Power Plants utilizing Capstone Mini Gas
Turbines and appropriate Absorption Cooling Equipment yielding
overall efficiency of up to 83%. Granada is distributor of Capstone
2
overall efficiency of up to 83%. Granada is distributor of Capstone
Turbine Corporation in USA & Middle East region
• In partnership with Austria-based Agrinz Technologies, Granada is
working on development of Bio Gas production systems in USA, Saudi
Arabia and Pakistan through processing of sewage, land fill gases,
molasses and recycling of animal and organic wastes.
• Granada is in the process of developing integrated CNG and LNG
Service Centres that will provide conversion and maintenance services
for Diesel Trucks, Generator Engines, Marine Transportation, Railway
Locomotives and Port Equipment to operate on CNG/LNG.

4. PROJECT DESIGN BASIS:
•Granada’s CCHP proposals are based on the uniquely designed
CAPSTONE micro gas turbine generator modules that are available in
capacities of 30, 65 and 200 KW. Granada Green Power is the OFFICIAL
DISTRIBUTOR for CAPSTONE TURBINES IN PAKISTAN
Micro Turbine Generators
3
Power Units
30 & 65 KW
Combined Heat & Power
Units 30 & 65 KW
Power Units
200 KW

5. The mini turbo-generators are equipped with only one moving part and air
bearings that obviate the need for any lubricating oil . Air Cooling of the unit
also eliminates any water cooling. This results in extremely reliable & low
maintenance power generation system with maintenance time of only six
hours per year.
Simple Design:
Only one moving part
Turbo - Generator Shaft
Micro Turbine Generators continued:
4
Air Foil
Shaft
Spring
Air bearings
• No oil or lubricants
Air cooled
• No anti-freeze or coolants
Proven reliability
• >16 million hours of operation
Variable speed from 45,000 to 96,000 RPM

6. • No gearbox, pumps, or
other mechanical
components
• All welded design
• Permanent magnet
Combustion
chamber
Exhaust output
Recuperator
Fuel injector
Air intake
Cooling fins
Micro Turbine Generators continued:
Inside the Micro Turbine
5
• Permanent magnet
alternator
• Lean premix combustion
Air bearings
Compressor
Generator
Turbine

7. • “Electronic” Gearbox
• No moving parts
• Variable Voltage 300-500 volts
• Variable Frequency 50-60 Hz
• Voltage & Current source Inverter
Micro Turbine Generators continued:
Power Electronics
6
• Voltage & Current source Inverter
• Built - in Fault protection

8. Regulated DC
Bus
Regulated DC
Bus
Engine Control Module
4th-Generation Power Electronics
Micro Turbine Generators continued:
7
Engine Control Module
•All digital DSP control
•Controls turbine
operation
•Wide speed control range
•Sensorless generator
control
•Small and lightweight
•Built in dynamic brake
•Built in system power
supply
•Air cooled
Battery Control Module
•All digital DSP control
•Transient power control
•Bi-directional power control
•Manages battery
charge/health
•Air cooled
Load Control Module
•All digital DSP control
•Built in neutral
•Built in protective relays
•Built in synchronization
•Built in paralleling capability
•Grid Connect or Stand Alone
•No transformer required
•100 kVA rating
•Air cooled
•IEEE 519 compliant
•UL 1741 certified
•NY & CA state certified for
direct-to-grid interconnection

9. Micro Turbine Generators continued:
Multi-Pac
Standalone
• Island Mode
• Up to 20 Units
Grid Connect
• Parallel to grid or
other source
• Unlimited Units
8

10. Multipac Control
• Load Following
• Built-in Synchronization & Load
Balancing
Turbo modules automatically respond to the electrical load. They turn on
to supply at peak load and switch on/off to respond to various loads
resulting in maximum fuel efficiency and low operating hours.
Micro Turbine Generators continued:
9
Dual Mode Controller
• Standardized Grid Isolation
• Grid Connect or Stand Alone Modes
•Direct2Grid™ interconnect
• UL1741, Rule 21: no relays, etc
•Remote monitoring/dispatch

11. •Low Installed Cost
•Short Commissioning Period
•Easy Interconnects to Local Grid or Bus
•Very Low Maintenance
•Ease of Operations
•No Lubricants or Coolants
Benefits of Micro Turbines
Micro Turbine Generators continued:
10
•No Lubricants or Coolants
•Small Footprint, Light Weight
•< 65dBA Acoustic Emissions
•Ultra-low NOx emissions with no
post-combustion devices or chemicals
•Runs on gas 325-2550 Btu with up to 7%
H2S (C30)
•Multi-packing capability
•Exhaust heat utilization

12. C30 C65 C200 (1Q08)
Rated
Power
30 kw 65 kw 200 kw
Heat Rate
12,200 Btu/kWh
(12,800 kJ)
11,000 Btu/kWh
(11,600 kJ)
10,500 Btu/kWh
(11,070 kJ)
Micro Turbine Generators continued:
Performance Data:
Since there are no heat losses through lubricating oils and water cooling, there is a
significantly higher recovery of lost heat from the combustion process through exhaust
emissions. The recovered heat is utilized in absorption chilling, process heating heating and
water desalination resulting in overall system efficiency between 80-90 percent.
11
Liquid
Fuel
D2, 1-K, Jet A, JP-
8, JP-5
D2 In Development
Gas Fuel
(HHV)
325-2131 Btu/scf 325-2550 Btu/scf TBD
Output
Current
46 Amps RMS 100 Amps RMS 274 Amps RMS
Nominal
Voltage
400 to 480 VAC 400 to 480 VAC 400 to 480 VAC
Exhaust
Gas Temp
530 F (275 C) 588 F (309 C) 527 F (275 C)
NOx
Emissions
Gas : <9 ppm
Liquid : <35 ppm
5 ppm Nominal
<9 ppm
Guaranteed
5 ppm Nominal
<9 ppm
Guaranteed
Acoustics
(Ind Pkg)
65 dBA 65 dBA 68 dBA

13. Combined Cooling, Heating and Power (CCHP) Units
Absorption
Chiller Unit
The exhaust gas from Turbines units is led to suitable Absorption Chiller unit that
utilizes the waste heat to produce air conditioning which enhances system efficiency
to between 80 to 90 percent. Typically, 4X65 KW Micro Turbine exhaust can produce
100 Refrig. Tons of Chilling without any fuel consumption.
12
65 KW Modular Micro Turbine Units

14. Combined Cooling, Heating and Power (CCHP) Units
Typical CCHP installation to provide Power, Air Conditioning & Heating For
Residential Buildings
13

15. Combined Cooling, Heating and Power (CCHP) Units
Typical Installation of CCHP Systems
14

16. FOR FURTHER INFORMATION, CONTACT:
Mohsin Siddiqui
President
Tel (US):
Tel (Pakistan)
+1 713 478 1338
+92 300 218 0588
15
Tel (Pakistan)
Tel (Saudi Arabia)
Fax:
Email:
+92 300 218 0588
+966 2 286 2526
+1 713 893 6135
mohsin.siddiqui@granadaservices.com