Vehicle plant daily inspection log
•
2 likes•5,915 views
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Report
Share
Report
Share
Download to read offline
Recommended
Recommended
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Hydrostatic pressure testing of pipework inside buildings Relevant Applicable MAS:
• Additional Training required:
NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
L C RR
1 Pressure testing equipment • Use at high pressure; • Rupture/failure of pump during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
3 3 9 MED i. The supervisor in charge of the test shall ensure that all pressure testing gauges etc. are in good sound condition, undamaged, correctly dated with the current valid calibration and that appropriate calibration certificates are available;
ii. All pumps shall be in sound condition and complete with a valid test certificate. Any vulnerable items such as manometers and pressure switches shall be removed or isolated from the system prior to testing if not required;
iii. The test supervisor shall carry out a thorough inspection of the system before requesting the permit detailed above to ensure that all isolations, blanks and other specified safety devices are in place before testing commences; No test documentation available Quarantine equipment until valid documentation provided Low
2 Permit to work system • Interaction of personnel and high pressure system; • Injury due to uncontrolled testing;
• Injury due to failure to ensure adequate pre-checks undertaken; 3 4 12 HIGH i. All pressure testing operations shall require a Permit to Work to ensure that no pressure testing will be allowed to commence until all,27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docxDwarika Bhushan Sharma
More Related Content
What's hot
Project Name: xxx
RA Ref No.: xxx
RA compilation Date: Review date:
Date:
Compiled by:
Reviewed by:
Approved by:
Overall Task Details
Hydrostatic pressure testing of pipework inside buildings Relevant Applicable MAS:
• Additional Training required:
NOC’s Required for task:
RISK SCORE CALCULATOR
Use the Risk Score Calculator to Determine the Level of Risk of each Hazard
What would be the
CONSEQUENCE
of an occurrence be? What is the LIKELIHOOD of an occurrence? Hierarchy of Controls
Frequent/Almost certain (5)
Continuous or will happen frequently Often (4)
6 to 12 times a year Likely (3)
1 to 5 times a year Possible (2)
Once every 5 years Rarely (1)
Less than once every 5 years Can the hazard be Eliminated or removed from the work place?
Catastrophic (5)
Multiple Fatalities High 25 High 20 High 15 Medium 10 Medium 5 Can the product or process be substituted for a less hazardous alternative?
Serious (4)
Class 1 single fatality High 20 High 16 High 12 Medium 8 Low 4 Can the hazard be engineered away with guards or barriers?
Moderate (3)
Class2 (AWI or LTI) or Class 1 Permanently disabling effects High 15 High 12 Medium 9 Medium 6 Low 3 Can Administration Controls be adopted
I.e. procedures, job rotation etc.
Minor (2)
Medical attention needed, no work restrictions. MTI Medium10 Medium 8 Medium 6 Low 4 Low 2 Can Personal Protective Equipment & Clothing be worn to safe guard against hazards?
Insignificant (1)
FAI Medium10 Medium 4 Low 3 Low 2 Low 1
No Specific Task Step
(In sequence of works) Hazard Details Consequence/Risk Initial Risk Rating Control Measures Residual Risks Additional Control Measures RR
L C RR
1 Pressure testing equipment • Use at high pressure; • Rupture/failure of pump during testing;
• Valve/connection failure;
• Instrument failure resulting in system over-pressurization;
3 3 9 MED i. The supervisor in charge of the test shall ensure that all pressure testing gauges etc. are in good sound condition, undamaged, correctly dated with the current valid calibration and that appropriate calibration certificates are available;
ii. All pumps shall be in sound condition and complete with a valid test certificate. Any vulnerable items such as manometers and pressure switches shall be removed or isolated from the system prior to testing if not required;
iii. The test supervisor shall carry out a thorough inspection of the system before requesting the permit detailed above to ensure that all isolations, blanks and other specified safety devices are in place before testing commences; No test documentation available Quarantine equipment until valid documentation provided Low
2 Permit to work system • Interaction of personnel and high pressure system; • Injury due to uncontrolled testing;
• Injury due to failure to ensure adequate pre-checks undertaken; 3 4 12 HIGH i. All pressure testing operations shall require a Permit to Work to ensure that no pressure testing will be allowed to commence until all,27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docxDwarika Bhushan Sharma
What's hot (20)
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
27 Hydrostatic Pressure Testing inside buildings Risk Assessment Templates.docx
9 Lifting Operations with Tower crane Risk Assessment Templates.docx
9 Lifting Operations with Tower crane Risk Assessment Templates.docx
Construction Environmental Awareness and Training POSTER
Construction Environmental Awareness and Training POSTER
LIFE LINE INSPECTION RECORD Form # HSEQ - LLIR Rev 2.docx
LIFE LINE INSPECTION RECORD Form # HSEQ - LLIR Rev 2.docx
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
FIRE EXTINGUISHER INSPECTION Form # HSEQ - FEI Rev 4.docx
MAST CLIMBER & CRADLE PERMIT Form # HSEQ - Rev 2.docx
MAST CLIMBER & CRADLE PERMIT Form # HSEQ - Rev 2.docx
Viewers also liked (8)
More from Azmeel Contracting Company
More from Azmeel Contracting Company (20)
Training confined space entry holewatch man [compatibility mode]
Training confined space entry holewatch man [compatibility mode]
Risk assessment for testing & commissioning of cranes
Risk assessment for testing & commissioning of cranes
Recently uploaded
https://app.box.com/s/4hfk1xwgxnova7f4dm37birdzflj806wGIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...Nguyen Thanh Tu Collection
Recently uploaded (20)
Basic Civil Engineering Notes of Chapter-6, Topic- Ecosystem, Biodiversity G...
Basic Civil Engineering Notes of Chapter-6, Topic- Ecosystem, Biodiversity G...
Overview on Edible Vaccine: Pros & Cons with Mechanism
Overview on Edible Vaccine: Pros & Cons with Mechanism
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
GIÁO ÁN DẠY THÊM (KẾ HOẠCH BÀI BUỔI 2) - TIẾNG ANH 8 GLOBAL SUCCESS (2 CỘT) N...
How libraries can support authors with open access requirements for UKRI fund...
How libraries can support authors with open access requirements for UKRI fund...
The Art Pastor's Guide to Sabbath | Steve Thomason
The Art Pastor's Guide to Sabbath | Steve Thomason
Vehicle plant daily inspection log
- 1. DATE START: √ x √ x √ x √ x √ x √ x √ x 1 FLUID LEVELS 2 OPERATING LEVERS 3 LIGHTS 4 HAZARD BEACON 5 REVERSING ALARM 6 WINDOWS 7 HORN 8 TIRES / TRACKS 9 SEATBELT 10 FIRE EXTINGUISHER 11 FOOT BRAKE 12 HAND BRAKE 13 MIRRORS 14 VISIBILITY 15 ATTACHMENTS (blade/ripper) REMARKS: INSPECTED BY: Driver Transport Foreman: Inspected by SER ITEM TO BE CHECKED CONDITION SAT SUN MON TUE WED THU FRI Azmeel In Association With Abunayyan & Saudi Tumpane DAILY PLAN INSPECTION LOG Vehicle: VEHICLE REGISTRATION #: End Date: