Weekly first aid room checklist
•
2 likes•5,558 views
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.
Report
Share
Report
Share
Download to read offline
Recommended
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Fire extinguisher monthly checklist report
This document is a fire extinguisher inspection record for contract number 098-C58 at the EPC of JIC Cooling Plant project site. It was inspected by Salman Khyder on May 2nd, 2015 and contains information on 34 fire extinguishers such as their type, condition, and inspection details. The inspection was reviewed by the safety officer.
8 lifting operations with mobile crane risk assessment templates
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Daily EHS Report Format-Rev 00_MPL (3).pptx
The document contains safety statistics and fire statistics reports for a facility. It summarizes safety indicators such as near misses, safety observations, training programs, and injuries for the current fiscal year compared to the same period last year. It also includes data on open and closed safety issues by department. The fire statistics report lists the types and numbers of fire extinguishers on site as well as fire protection systems. Three EHS observations were noted regarding uncovered fuel lines, lack of fire extinguishers, and need for additional fire suppression systems on furnace and feeding floors.
PPT ON PERMIT TO WORK, by Ekemezie E
The document discusses permit to work (PTW), which is a formal safety system used to control potentially hazardous work activities. It outlines the PTW process involving the permit applicant, responsible asset holder supervisor, asset holder site supervisor, and permit holder. The PTW contains details of the job, required documents like a job hazard analysis, and safety precautions. Certificates and personal protective equipment requirements are also specified. The validity, handover, and closure of the PTW are further described.
25 Demolition of existing concrete structures Risk Assessment Templates.docx
The document provides a risk assessment for demolition of an existing concrete structure. It identifies hazards associated with the work, assesses the initial risk rating, and lists control measures to reduce the residual risks. Key steps of the work include plant checks, demolition of the structure using an excavator, supervision of demolition, breaking works manually using air hammers, and removal of waste. Hazards include plant/pedestrian interactions, unauthorized plant use, noise, exposed rebar, and contamination. Control measures require certification of plant and operators, designated traffic routes, flagmen, inspections, signage, and personal protective equipment.
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
Project Information
Project Name: Serial No:
Location: Manufacture Name:
Company Name: Date :
3rd Party Inspection valid till:
Sr. Description Yes No N/A Comments
1. Are compressors equipped with pressure relief valves and pressure gauges?
2. Are signs posted to warn about hot surfaces of the exhaust?
3. Air compressor 3rd party certificate available?
4. Is whip check arrestor used in all coupling points?
5. Is the belt drive system totally enclosed to provide protection for the front, back, top, and sides?
6. Air hoses in good condition without cracks/ damages.
7. Control valves in good condition
8. Is there any oil leakage
9. Drip tray provided
10. Fire extinguisher provided
11. Any damage/Cut in tires/ tire pressure
12. Meter gauge working properly
13. Lifting Hooks damaged
14. Battery of air compressor charged
15. Visible damage
16. Exhaust directed/ close to combustibles/ flammables
17. Exhaust not directed inside any room. (Internal Combustion Air Compressors shall be kept outside in the well-ventilated area)
18. Others specify:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / in charge : Signature:
Safety committees duties 1
Safety committees play an important role in workplaces by providing central oversight of safety programs, acting as a sounding board for safety issues, and coordinating safety training. An effective safety committee encourages safety awareness, gets employees involved in the safety program, and provides a mechanism for identifying and addressing hazards early. Organizations should define the responsibilities and duties of the committee, such as reporting unsafe conditions, conducting inspections, investigating accidents, and holding regular meetings. Training committee members in their specific roles is important for the committee to be effective.
Recommended
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Fire extinguisher monthly checklist report
This document is a fire extinguisher inspection record for contract number 098-C58 at the EPC of JIC Cooling Plant project site. It was inspected by Salman Khyder on May 2nd, 2015 and contains information on 34 fire extinguishers such as their type, condition, and inspection details. The inspection was reviewed by the safety officer.
8 lifting operations with mobile crane risk assessment templates
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Daily EHS Report Format-Rev 00_MPL (3).pptx
The document contains safety statistics and fire statistics reports for a facility. It summarizes safety indicators such as near misses, safety observations, training programs, and injuries for the current fiscal year compared to the same period last year. It also includes data on open and closed safety issues by department. The fire statistics report lists the types and numbers of fire extinguishers on site as well as fire protection systems. Three EHS observations were noted regarding uncovered fuel lines, lack of fire extinguishers, and need for additional fire suppression systems on furnace and feeding floors.
PPT ON PERMIT TO WORK, by Ekemezie E
The document discusses permit to work (PTW), which is a formal safety system used to control potentially hazardous work activities. It outlines the PTW process involving the permit applicant, responsible asset holder supervisor, asset holder site supervisor, and permit holder. The PTW contains details of the job, required documents like a job hazard analysis, and safety precautions. Certificates and personal protective equipment requirements are also specified. The validity, handover, and closure of the PTW are further described.
25 Demolition of existing concrete structures Risk Assessment Templates.docx
The document provides a risk assessment for demolition of an existing concrete structure. It identifies hazards associated with the work, assesses the initial risk rating, and lists control measures to reduce the residual risks. Key steps of the work include plant checks, demolition of the structure using an excavator, supervision of demolition, breaking works manually using air hammers, and removal of waste. Hazards include plant/pedestrian interactions, unauthorized plant use, noise, exposed rebar, and contamination. Control measures require certification of plant and operators, designated traffic routes, flagmen, inspections, signage, and personal protective equipment.
AIR COMPRESSOR CHECKLIST Form # HSEQ - ACL Rev 2.docx
Project Information
Project Name: Serial No:
Location: Manufacture Name:
Company Name: Date :
3rd Party Inspection valid till:
Sr. Description Yes No N/A Comments
1. Are compressors equipped with pressure relief valves and pressure gauges?
2. Are signs posted to warn about hot surfaces of the exhaust?
3. Air compressor 3rd party certificate available?
4. Is whip check arrestor used in all coupling points?
5. Is the belt drive system totally enclosed to provide protection for the front, back, top, and sides?
6. Air hoses in good condition without cracks/ damages.
7. Control valves in good condition
8. Is there any oil leakage
9. Drip tray provided
10. Fire extinguisher provided
11. Any damage/Cut in tires/ tire pressure
12. Meter gauge working properly
13. Lifting Hooks damaged
14. Battery of air compressor charged
15. Visible damage
16. Exhaust directed/ close to combustibles/ flammables
17. Exhaust not directed inside any room. (Internal Combustion Air Compressors shall be kept outside in the well-ventilated area)
18. Others specify:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / in charge : Signature:
Safety committees duties 1
Safety committees play an important role in workplaces by providing central oversight of safety programs, acting as a sounding board for safety issues, and coordinating safety training. An effective safety committee encourages safety awareness, gets employees involved in the safety program, and provides a mechanism for identifying and addressing hazards early. Organizations should define the responsibilities and duties of the committee, such as reporting unsafe conditions, conducting inspections, investigating accidents, and holding regular meetings. Training committee members in their specific roles is important for the committee to be effective.
Permit to work training
Permit To Work
Types of Permit To Work
Hot Work Permit
Confined Space Entry Permit
Electrical Permit
Excavation Permit
Radiography Permit
Crane Critical Lifts Permit
Man Basket Operation
Permit Issuer Responsibilities
Permit Receiver Responsibilities
HSE Permit Coordinator
Responsibilities
Revalidation of the Permit
Work Permit Flow Chart
Safeworkpmits
The document discusses safe permits to work and provides examples of when they are required. It describes permits for hot work, confined space entry, excavations, and other hazardous jobs. Safe permits are used to identify hazards, require precautions, and protect workers from injury or accidents. Managers, supervisors and appointed persons are responsible for issuing permits and ensuring safety procedures are followed.
Hse plan
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
3 emergency management risk assessment templates
3 Emergency Management Risk Assessment Templates
Emergency Procedure
Access requirement for Emergency Vehicles
• Police;
• Civil Defense;
• Ambulance;
(Including as per 2017 Fire Life Safety COP Requirements)
Reverse Parking of private vehicles office areas
Project Vehicle Parking
Project Emergency Site Exits
Project Emergency Communication
Project Assembly points
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
25 demolition of existing concrete structures risk assessment templates
Plant checks on arrival to site
PRIOR TO SITE ACCESS • Use of heavy plant for demolition;
Demolition of concrete structure • Excavator breaker operation
• (Operator)Plant / pedestrian interaction;
• Operator visibility;
Demolition (supervision) • Plant operations around workers;
• Workers in plant operating radius;
Undertaking breaking Works – Manual operation using compressed air jack hammers; • Use of hand held breakers;
Removal of waste concrete and rebar • Truck operations around workers;
Job Safety Analysis For Lifting Activity By Crane | JSA | Gaurav Singh Rajput
Job Safety Analysis For Lifting Activity By Crane | Gaurav Singh Rajput | TBRA | JSA | Risk Assessment
Permit to Work Training
A work permit document outlines the type of work, location, equipment, time required, hazards, and safety precautions for a task. There are various types of work permits including hot work, cold work, chemical/acid work, work at height, excavation, electrical, confined space, vehicular/earthmoving equipment, and radiology permits. Hot work permits cover tasks involving heat, fire or sparks like welding, cutting, drilling, grinding, and sandblasting. Each task outlines its hazards like burns, sparks, fumes, and required safety equipment like fire extinguishers, protective clothing, ventilation and more.
Work Permit System
This document discusses work permit systems and their importance for safety. It outlines the key aspects that work permits address like nature of work, equipment, location, hazards. Work permits are used to authorize specific jobs in defined areas and times. They aim to prevent accidents by clearly identifying responsibilities and hazards. The document also discusses types of work permits for hot work, confined space entry, excavation and their associated precautions to minimize risks.
Monthly Safety Report Feb 2012
The safety report summarizes safety inspections, meetings, statistics and training from February 2012 at a construction site. Four joint safety inspections were conducted weekly with contractors. No lost-time injuries occurred among 36840 man-hours worked. Over 250 workers received tool box talks on various safety topics. A permit to work system was developed and training was provided after a briefing by a safety expert. Two workers received awards for safe practices. No accidents were reported and a government inspection raised no concerns.
LOTO Training.ppt
This document discusses lockout/tagout procedures for working on hazardous equipment. It covers who needs training in lockout/tagout, what hazardous energy is, the different types of lockout devices, tag requirements, and required lockout procedures. The procedures involve notifying affected employees, shutting down and isolating equipment, attaching lockout devices, releasing stored energy, and verifying isolation before starting maintenance. Examples of lockout devices include locks for electrical panels and plugs, blanks for pipes, and blocks for presses. Tags are only for information and don't provide the protection of lockout devices.
DOC-20220402-WA0048..ppt- Permit To Work Procedure
Occupational health and safety in the workplace, procedure to carry out high risks job and what to do in ensuring safety of the employees.
Fire Risk Assessment.pdf
This 8-page fire risk assessment document identifies several hazards for a workshop including: lack of permits, improper PPE, manual handling, lone working, poor housekeeping, unloading materials, power tool usage, bending activities, drilling, chemical handling, combustible materials, flammable liquids, and emergency response issues. For each hazard, the document rates the initial risk level, identifies controls to implement, and assigns responsible parties. It then provides the reduced residual risk rating after controls are in place. The overall goal is to reduce initial "High Risk" ratings to "Low Risk" through implementation of proper safety protocols and controls.
December -15 Daily Observation Report
The document is a site safety observation report prepared by Mohammed Mubasheeruddin on December 15, 2016. It details three safety observations made at a construction site, including workers following without proper protective equipment, improperly stocked ducting material, and improperly stoked fire fighting pipes. For each observation, the report notes an identified unsafe act and the corresponding correction that was taken.
Safety commitee meeting
Safety committees have several key duties: focusing on safety at both the corporate and site levels, providing a way for workers to raise safety concerns, and ensuring total worker participation. They review hazards and incidents, monitor safety precautions and rules, investigate near misses and unsafe conditions, manage PPE, and ensure actions are effective. An effective safety committee promotes safety awareness, programs, practices, and a feedback mechanism to identify and address new hazards.
Scaffold & fall arest checklist
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Work permit system
The document discusses a work permit system used in industries that handle hazardous materials. The permit system is intended to prevent injuries, protect property from damage, and ensure work is done safely. Different colored permits are required for different types of work, such as hot work, vehicle entry, excavation, and work at heights. The permits specify the safe conditions and procedures for the work. Authorized personnel who have knowledge of the work and conditions issue and execute the permits.
Health, Safety and Environmental Management Plan
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
13 initial project site office set up risk assessment templates
13 Initial Project Site Office Set-up Risk Assessment Templates
Working adjacent to public areas
Vehicles/Plant Equipment movements
Groundworks / excavations
Excavation in site area
Trial trenches, septic tank excavation etc.
Works at Height
(Office cabin set-up)
Use of Ladders and stepladders
Mobile Crane operation
(Cabin/unit placing)
Temporary electrics - offices
Site generators – offices and site
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
More Related Content
What's hot
Permit to work training
Permit To Work
Types of Permit To Work
Hot Work Permit
Confined Space Entry Permit
Electrical Permit
Excavation Permit
Radiography Permit
Crane Critical Lifts Permit
Man Basket Operation
Permit Issuer Responsibilities
Permit Receiver Responsibilities
HSE Permit Coordinator
Responsibilities
Revalidation of the Permit
Work Permit Flow Chart
Safeworkpmits
The document discusses safe permits to work and provides examples of when they are required. It describes permits for hot work, confined space entry, excavations, and other hazardous jobs. Safe permits are used to identify hazards, require precautions, and protect workers from injury or accidents. Managers, supervisors and appointed persons are responsible for issuing permits and ensuring safety procedures are followed.
Hse plan
This document outlines an HSE (Health, Safety, and Environment) plan for Alghanim Group of Shipping & Transport. It includes policies on company HSE, specific objectives, zero accident tolerance, and responsibilities of individuals like the Corporate HSE Manager and Operations Manager. The plan details AGST's responsibilities regarding HSE trainings, personnel, work stoppages, inspections, and programs. It also covers requirements for vehicles, marine operations, fire prevention, PPE, and more. The goal is to promote a safe working environment free of risks and ensure compliance with regulations.
3 emergency management risk assessment templates
3 Emergency Management Risk Assessment Templates
Emergency Procedure
Access requirement for Emergency Vehicles
• Police;
• Civil Defense;
• Ambulance;
(Including as per 2017 Fire Life Safety COP Requirements)
Reverse Parking of private vehicles office areas
Project Vehicle Parking
Project Emergency Site Exits
Project Emergency Communication
Project Assembly points
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
25 demolition of existing concrete structures risk assessment templates
Plant checks on arrival to site
PRIOR TO SITE ACCESS • Use of heavy plant for demolition;
Demolition of concrete structure • Excavator breaker operation
• (Operator)Plant / pedestrian interaction;
• Operator visibility;
Demolition (supervision) • Plant operations around workers;
• Workers in plant operating radius;
Undertaking breaking Works – Manual operation using compressed air jack hammers; • Use of hand held breakers;
Removal of waste concrete and rebar • Truck operations around workers;
Job Safety Analysis For Lifting Activity By Crane | JSA | Gaurav Singh Rajput
Job Safety Analysis For Lifting Activity By Crane | Gaurav Singh Rajput | TBRA | JSA | Risk Assessment
Permit to Work Training
A work permit document outlines the type of work, location, equipment, time required, hazards, and safety precautions for a task. There are various types of work permits including hot work, cold work, chemical/acid work, work at height, excavation, electrical, confined space, vehicular/earthmoving equipment, and radiology permits. Hot work permits cover tasks involving heat, fire or sparks like welding, cutting, drilling, grinding, and sandblasting. Each task outlines its hazards like burns, sparks, fumes, and required safety equipment like fire extinguishers, protective clothing, ventilation and more.
Work Permit System
This document discusses work permit systems and their importance for safety. It outlines the key aspects that work permits address like nature of work, equipment, location, hazards. Work permits are used to authorize specific jobs in defined areas and times. They aim to prevent accidents by clearly identifying responsibilities and hazards. The document also discusses types of work permits for hot work, confined space entry, excavation and their associated precautions to minimize risks.
Monthly Safety Report Feb 2012
The safety report summarizes safety inspections, meetings, statistics and training from February 2012 at a construction site. Four joint safety inspections were conducted weekly with contractors. No lost-time injuries occurred among 36840 man-hours worked. Over 250 workers received tool box talks on various safety topics. A permit to work system was developed and training was provided after a briefing by a safety expert. Two workers received awards for safe practices. No accidents were reported and a government inspection raised no concerns.
LOTO Training.ppt
This document discusses lockout/tagout procedures for working on hazardous equipment. It covers who needs training in lockout/tagout, what hazardous energy is, the different types of lockout devices, tag requirements, and required lockout procedures. The procedures involve notifying affected employees, shutting down and isolating equipment, attaching lockout devices, releasing stored energy, and verifying isolation before starting maintenance. Examples of lockout devices include locks for electrical panels and plugs, blanks for pipes, and blocks for presses. Tags are only for information and don't provide the protection of lockout devices.
DOC-20220402-WA0048..ppt- Permit To Work Procedure
Occupational health and safety in the workplace, procedure to carry out high risks job and what to do in ensuring safety of the employees.
Fire Risk Assessment.pdf
This 8-page fire risk assessment document identifies several hazards for a workshop including: lack of permits, improper PPE, manual handling, lone working, poor housekeeping, unloading materials, power tool usage, bending activities, drilling, chemical handling, combustible materials, flammable liquids, and emergency response issues. For each hazard, the document rates the initial risk level, identifies controls to implement, and assigns responsible parties. It then provides the reduced residual risk rating after controls are in place. The overall goal is to reduce initial "High Risk" ratings to "Low Risk" through implementation of proper safety protocols and controls.
December -15 Daily Observation Report
The document is a site safety observation report prepared by Mohammed Mubasheeruddin on December 15, 2016. It details three safety observations made at a construction site, including workers following without proper protective equipment, improperly stocked ducting material, and improperly stoked fire fighting pipes. For each observation, the report notes an identified unsafe act and the corresponding correction that was taken.
Safety commitee meeting
Safety committees have several key duties: focusing on safety at both the corporate and site levels, providing a way for workers to raise safety concerns, and ensuring total worker participation. They review hazards and incidents, monitor safety precautions and rules, investigate near misses and unsafe conditions, manage PPE, and ensure actions are effective. An effective safety committee promotes safety awareness, programs, practices, and a feedback mechanism to identify and address new hazards.
Scaffold & fall arest checklist
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
Work permit system
The document discusses a work permit system used in industries that handle hazardous materials. The permit system is intended to prevent injuries, protect property from damage, and ensure work is done safely. Different colored permits are required for different types of work, such as hot work, vehicle entry, excavation, and work at heights. The permits specify the safe conditions and procedures for the work. Authorized personnel who have knowledge of the work and conditions issue and execute the permits.
Health, Safety and Environmental Management Plan
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/health-safety-and-environmental-management-plan-330
This document is a 30 page health, safety and environmental management plan that will provides organisations with a very solid framework for managing health, safety and environmental risk.
The key elements include: HSE policy, risk management, management responsibilities, incident investigation, injury reporting, training and competency, emergency management, sub-contractor management, communication and consultation, occupational health, processes for work practices, monitoring and review.
Once downloaded this document can be enhanced by purchasing a number of forms, registers, checklist or templates from this site.
This document present excellent value for money for the perspective client; to draft a document of similar quality would cost several thousands of dollars in man hours. However, you will need to tailor this HSE management plan to your organisation as well to any relevant legislation, standards or codes.
This document will suit medium to large businesses, or the small business owner looking to step up their HSE compliance or improve their chance of winning work with high end clients.
The savvy buyer will recognise value for money in this document.
13 initial project site office set up risk assessment templates
13 Initial Project Site Office Set-up Risk Assessment Templates
Working adjacent to public areas
Vehicles/Plant Equipment movements
Groundworks / excavations
Excavation in site area
Trial trenches, septic tank excavation etc.
Works at Height
(Office cabin set-up)
Use of Ladders and stepladders
Mobile Crane operation
(Cabin/unit placing)
Temporary electrics - offices
Site generators – offices and site
What's hot (20)
25 demolition of existing concrete structures risk assessment templates
25 demolition of existing concrete structures risk assessment templates
Job Safety Analysis For Lifting Activity By Crane | JSA | Gaurav Singh Rajput
Job Safety Analysis For Lifting Activity By Crane | JSA | Gaurav Singh Rajput
DOC-20220402-WA0048..ppt- Permit To Work Procedure
DOC-20220402-WA0048..ppt- Permit To Work Procedure
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
13 initial project site office set up risk assessment templates
13 initial project site office set up risk assessment templates
Viewers also liked
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
Vehicle plant daily inspection log
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Weekly ambulance checklist
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.
Entry log for confined space
This document outlines procedures for confined space entry and exit logging. It requires sign-in and sign-out for any entrants to confined spaces to ensure accurate tracking of who and how many people are inside at a given time to enable effective emergency response if needed. Entrants must sign verifying their understanding of and compliance with the confined space safety program before entering permitted confined spaces.
Drivign permit form
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
PowerLogistics Asia 2014 - Lifting & Hoisting - Best Practices – P V N Chandr...
www.powerlogisticsasia.com is an annual project logistics event which is taking place in Singapore. The event brings together the heavy transport and lifting industry that is catering to the oil, gas, heavy engineering, power, mining and other related industries. It offers a great opportunity for participants to hold up the flag in the South East Asian project cargo market. It comprises of educational workshops, conferences, seminars and an exhibition.
www.powerlogisticsasia.com
Mg041911 Cortland Lifting Slings Presentation
The document provides an overview of Cortland Synthetic Fiber Lifting Slings, a division of Actuant that specializes in designing and manufacturing high performance braided ropes and assemblies using synthetic fibers like HMPE. Cortland offers two main types of synthetic fiber lifting slings - Selantic round slings and Puget Sound Rope slings made from Plasma rope. These slings provide advantages over traditional wire rope slings by being lighter weight, more flexible, and resistant to corrosion.
INFLUENCE OF WIND ON LIFTING OPERATIONS
This document discusses the influence of wind on lifting operations. It notes that wind is often an underrated hazard that can cause crane accidents. Statistics show that several crane accidents in recent years were caused by high winds, sometimes resulting in fatalities and injuries. The document explores the basics of wind and gusts, and how wind force can overload cranes and suspended loads from various directions. It provides guidance on assessing wind speed and sail areas to determine the actual permissible wind speed for safe lifting operations according to the crane's load chart. Managing wind risks is important for safely conducting lifts.
Personnel liftingad
Your responsibility is to ensure personnel lifting equipment and operations are conducted safely. Key requirements include:
1) Designing and inspecting personnel platforms according to standards, and ensuring they are properly identified.
2) Using hoisting cranes and derricks that meet requirements like anti-two-block devices and boom indicators, and do not exceed 50% of rated capacity.
3) Performing regular inspections and tests of platforms and rigging by qualified persons, correcting deficiencies, and keeping records. Platforms must be proof tested at 125% capacity before each lift.
4) Ensuring adjustments and repairs are done properly by qualified personnel, and that replacements meet specifications. Modifications require approval.
Weekly excavation checklist
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.
Lifting equipment at work
This presentation provides general information about the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER):
What employers need to do to protect your employees
Also useful to employees and their representatives
More information : http://worlifts.co.uk/
Lifting and handling 2
This document provides statistical data on workplace injuries related to lifting, handling objects, and improper body mechanics from September 2011 through March 2012. It shows that 311,280.08 was incurred in claims for these types of injuries. The training aims to reduce future employee injuries by teaching safe lifting and body mechanics techniques.
Viewers also liked (16)
PowerLogistics Asia 2014 - Lifting & Hoisting - Best Practices – P V N Chandr...
PowerLogistics Asia 2014 - Lifting & Hoisting - Best Practices – P V N Chandr...
More from Azmeel Contracting Company
Training confined space entry holewatch man [compatibility mode]
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuation
Risk assessment for testing & commissioning of cranes
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Electricity, Electrical Safety, Electrocution,
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.
Defensive driving azmeel
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.
Weekly scaffolding checklist
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.
Water tanker log sheet
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.
Scissor lift 2 daily inspection log
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing parts
Powder actuated tool
This document is a log sheet to track the issuance and return of powder cartridges and nail cartridges used in powder actuated tools. It lists the date items are issued and returned along with spaces for store and operator signatures to record when cartridges are given out and returned.
Patients weekly report form
This weekly report from a hospital documents the number of patients treated for various common illnesses and injuries. It includes data on first aid cases, recordable and restricted injuries, and fatalities. The report also lists the total number of patients seen broken down by conditions such as upper respiratory infections, backaches, gastritis, diarrhea, colds and flu, and several other diseases. It appears to be signed by the nurse and safety manager documenting the data.
Patients monthly report form
This document appears to be a monthly patient report from a medical facility listing various common diseases and injuries treated. It includes categories for first aid cases, recordable and restricted injuries, fatalities, lost time injuries, hospital referrals, and total patients for the month. The document provides quantitative data but is missing specific numbers or details about individual patients.
Observation check list by safety officer
This safety observation report documents a site visit where potential safety issues were observed and categorized. Corrective actions were recommended and follow ups will track the status of addressing each issue. The report aims to improve safety practices on an construction project through monitoring and feedback.
Monthly walk through schedule month of september 2013
The document contains the weekly walkthrough schedule for the 098 C-58 project for the month of May 2015. It lists the date, day, contractors and representatives attending from the RC and contractor, time, and location for each weekly walkthrough during the month. The ES&H Manager Dawood Akbar and representatives from the contractor will participate in walkthroughs of the lay down area and construction site each Sunday in May at 07:30-08:30 am to review safety and make improvements.
Monthly tool box meeting training schedule [compatibility mode]
This document provides a monthly training and tool box meeting schedule for May 2015. It lists the dates for various safety meetings covering topics like excavation, heat stress, crane and rigging operations, and the STARRT card system. The schedule was approved by the ES&H Manager, Dawood Akber, for a construction project by Azmeel in Association With Abu. Nayyan & Saudi Tumpane.
Monthly smoke derector inspection report
This document is a monthly smoke detector inspection report for buildings in an office complex and storage area. It lists the serial numbers, building locations, and battery statuses of 61 smoke detectors across various buildings and areas including the RC building, Masjid building, CR toilet, Account department, storage area, and chemical storage. The report was inspected and approved by an electrical technician and electrical engineer on May 2, 2015 as part of an inspection of the smoke detectors in offices and storage facilities at a cooling plant construction site.
Ladder check list
This document contains inspection records for ladders with serial numbers and remarks. The records note the date, location, serial number, remarks on the status of each ladder, the ladder type, size, and signature of the inspector. In total, 50 ladders were inspected on two separate dates in location AZ, with most noted as "ok" but some noted as "transfer".
Full body harness inspecetion tag
The document contains inspection records for full body harnesses over three years. Each year contains monthly inspection records signed by inspectors, and tags instructing not to remove attached to harnesses with identification numbers. The purpose is to track routine inspections of safety equipment.
First aid log sheet
This 3 sentence summary provides the high level information from the document:
The document appears to be a daily first aid log for an organization called Azmeel in association with Abu Nayyan & Saudi Tumpane. The log tracks date, time, name, company ID number, job title, complaint, treatment, and remarks for any individuals who receive first aid on a given date. A male nurse is responsible for getting daily acknowledgement of the log from the Azmeel Safety Manager.
More from Azmeel Contracting Company (18)
Training confined space entry holewatch man [compatibility mode]
Training confined space entry holewatch man [compatibility mode]
Risk assessment for testing & commissioning of cranes
Risk assessment for testing & commissioning of cranes
Monthly walk through schedule month of september 2013
Monthly walk through schedule month of september 2013
Monthly tool box meeting training schedule [compatibility mode]
Monthly tool box meeting training schedule [compatibility mode]
Recently uploaded
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaPCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Recently uploaded (20)
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Weekly first aid room checklist
- 1. √ x √ x √ x √ x √ x √ x √ x 1 Trash Bin for the General Waste 2 Toilet 3 Fridge 4 Bio Hazard Medical Waste Bin 5 Water Dispenser 6 Paper Cups 7 Bed Roll Tissue 8 Toilet Paper 9 Hand Towel 10 Soap 11 Stretcher 12 Medicine 13 Chairs / Table 14 Lights 15 AC INSPECTED BY: Project Male Nurse Concurred by Safety Manager ITEM TO BE CHECKED DATE START: REMARKS: End Date: SUN MON TUE Note: Form to be returned to contractor safety manager at the end of the week. SAT Azmeel In Association With Abunayyan & Saudi Tumpane Weekly First Aid Room Checklist WED FRI CONDITION THU S.No