This document provides a design guide for a Juniper Networks Universal Access and Aggregation Mobile Backhaul (MBH) solution. It defines key terminology, describes the MBH use case and architecture including network segments, services, and topology. It also outlines the value proposition of the solution in providing a scalable, reliable transport for 2G, 3G, HSPA and 4G/LTE mobile services through an MPLS-based network and service design.
Just when you thought that MPLS has peaked, that the pace of innovation has slowed, and that MPLS is getting boring, two promising new developments—namely “MPLS in the access” and “seamless MPLS”—bring fresh excitement to service provider networks. MPLS in the access is evolutionary, but a necessary prerequisite to seamless MPLS, which has the potential to revolutionize the life cycle of service offerings.
인터맥 PB21, PB31 및 PB51은 감열타입, 견고한 모바일 프린터로 인보이스, 운송, 물류, 배달, 모바일 POS (point-of-sale) 도매, 소매 영수증, 창고관리, 재고관리 분야에 적합한 모바일 프린터 입니다.
PB21, PB31, PB51 모바일 프린터는 경쟁 모델보다 메모리가 2 배 이상이며, 최적화된 인쇄 메커니즘을 채택하여 영수증과 인보이스를 20 ~ 30 % 더 빠르게 처리할 수 있으며 로고와 같은 복잡한 그래픽도 쉽게 처리 할 수 있습니다.
안정된 인쇄를 위해 Notch, Black Mark, End-of-Roll 및 도어 열림상태 (직관적인 LCD 디스플레이를 통해 모두 전달됨)를 감지하는 온보드 센서로 PB21, PB31, PB51 프린터는 작업자가 프린터의 상태를 항상 알 수 있도록 도와줍니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, Bluetooth, 직렬, USB) 중 하나를 선택하면 환경에 맞는 인터페이스를 선택할 수 있습니다.
또한 프린터는 5피트, 26회 낙하 사양과 (6.5 피트, 옵션 보호 케이스 포함); IP54 등급이 적용되었습니다.
The industry’s fastest 2,3 and 4 inch rugged mobile receipt printers
Built rugged to survive realworld mobility in field service, route accounting and pointof- service applications
20-30% faster time-to-receipt and -invoice printing than competitive products
Low cost of development and support
Paper sensors and standard LCD display minimize lost transactions and wasted time troubleshooting
Seamless integration with Intermec computers and other mobile devices
Secure wired and wireless communication options: Bluetooth®, 802.11 b/g, USB, Serial
Optional integrated card reader supports latest EMV and ISO payment standards
SmartSystems® remote device management reduces support needs
PRINTER CHARACTERISTICS
PB21 :
Width : 101 mm (4 in)
Height : 176 mm (6.9 in)
Depth : 71 mm (2.8 in)
Weight (with battery) : 678 g (23.9oz)
PB31 :
Width : 127 mm (5 in)
Height : 182 mm (7.2 in)
Depth : 81 mm (3.2 in)
Weight (with battery) : 828 g (29.2oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides (Mil Std 810F procedure)
PB21/31: 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB21/31 : 7.4V Li-Ion, 2.3 Ah, rechargeable battery (typical)
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g (PB21/31 only)
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec) 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
USER INTERFACE
LCD and 4 buttons : standby, paper feed, setup, info Four audio status indicators: error alert, hardware change alert, button press alert and startup alert.
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥 PB22, PB32 및 PB50 모바일 프린터 제품군은 창고관리, 유통, 매장 및 기업 자산관리 분야에서 까다로운 애플리케이션을 보유한 고객에게 탁원한 선택이 될 것입니다.
인터맥 PB 프린터는 경쟁 제품보다 2~3배 빠른 인쇄속도로 작업자의 생산성과 정확성을 크게 향상시킵니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, BT, 직렬, USB)를 선택하면 사용자 환경에 맞는 인터페이스를 선택할 수 있으며, 벨트 클립, 어깨 끈, 차량 마운트 등 다양한 운반 옵션을 사용할 수 있습니다.
또한 이 인터맥 PB 시리즈 프린터는 5 피트에서 다중 낙하 사양과 IP54 등급 및 지게차 강도의 충격 및 진동 사양을 갖추고 있습니다.
The industry’s fastest 2, 3, and 4 inch rugged mobile label printers
Built rugged to survive real-world industrial and retail environments
Two to three times faster time-tofirst- label than competitive products
Low cost of development, deployment and support
Seamless integration with Intermec mobile computers and other mobile devices
Secure wired and wireless communications options: Bluetooth®, 802.11 b/g, USB, Serial
Label sensors minimize printing errors and reduce waste
SmartSystems® remote device management reduces support needs
Optimized for Intermec media, including linerless label media options
PRINTER CHARACTERISTICS
Width : 160 mm (6.3 in)
Height : 174.5 mm (6.9 in)
Depth : 78.8 mm (3.1 in)
Weight (with battery) : 1189 g (42.0 oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides
PB22/32 : 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB50: 14.8V Li-Ion, 2.2 Ah, rechargeable battery
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec), 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
MEDIA (Type : Labels or receipt media)
Labels and Tags : Duratherm II, Duratherm III, Duratherm NIR, Duratherm III IR, Duratherm III Synthetic, Duratherm III Linerless, Duratherm II 5-mil Tag
Receipts : Duratherm Receipt II, Duratherm Receipt III
Media Width Ranges : PB50: 49mm to 111.5mm (2 to 4.39 in)
Core ID : 19mm (0.75 in) standard, 10.16 mm (0.4 in) supported
Max OD : PB50: 67.3mm (2.65 in)
SOFTWARE
Programming Language
IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim (DPL), CSim (CPCL)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥 PB22, PB32 및 PB50 모바일 프린터 제품군은 창고관리, 유통, 매장 및 기업 자산관리 분야에서 까다로운 애플리케이션을 보유한 고객에게 탁원한 선택이 될 것입니다.
인터맥 PB 프린터는 경쟁 제품보다 2~3배 빠른 인쇄속도로 작업자의 생산성과 정확성을 크게 향상시킵니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, BT, 직렬, USB)를 선택하면 사용자 환경에 맞는 인터페이스를 선택할 수 있으며, 벨트 클립, 어깨 끈, 차량 마운트 등 다양한 운반 옵션을 사용할 수 있습니다.
또한 이 프린터는 5피트에서 다중 낙하 사양과 IP54 등급 및 지게차 강도의 충격 및 진동 사양을 갖추고 있습니다.
The industry’s fastest 2, 3, and 4 inch rugged mobile label printers
Built rugged to survive real-world industrial and retail environments
Two to three times faster time-tofirst- label than competitive products
Low cost of development, deployment and support
Seamless integration with Intermec mobile computers and other mobile devices
Secure wired and wireless communications options: Bluetooth®, 802.11 b/g, USB, Serial
Label sensors minimize printing errors and reduce waste
SmartSystems® remote device management reduces support needs
Optimized for Intermec media, including linerless label media options
PRINTER CHARACTERISTICS
PB22 :
Width : 101 mm (4 in)
Height : 176 mm (6.9 in)
Depth : 71 mm (2.8 in)
Weight (with battery) : 678 g (23.9oz)
PB32 :
Width: 127 mm (5 in)
Height: 182 mm (7.2 in)
Depth: 81 mm (3.2 in)
Weight (with battery): 828 g (29.2oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides
PB22/32 : 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB22/32 : 7.4V Li-Ion, 2.3 Ah, rechargeable battery (typical)
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec), 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
MEDIA (Type : Labels or receipt media)
Labels and Tags : Duratherm II, Duratherm III, Duratherm NIR, Duratherm III IR, Duratherm III Synthetic, Duratherm III Linerless, Duratherm II 5-mil Tag
Receipts : Duratherm Receipt II, Duratherm Receipt III
Media Width Ranges : PB22: 25.4mm to 55.88mm (1 to 2.2 in)
Core ID : 19mm (0.75 in) standard, 10.16 mm (0.4 in) supported
Max OD : PB22: 57.2mm (2.25 in)
SOFTWARE
Programming Language
IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim (DPL), CSim (CPCL)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ACHIEVING THE VISION OF 80 PERCENT RENEWABLES BY 2030 SRILANKAPrivate Consultants
a draft report to be presented to President of Sri Lanka, Gotabaya Rajapaksha, by State Minister of Renewable Energy, Duminda Dissanayake in September 2020, outlining the state of renewable energy in Sri Lanka
Just when you thought that MPLS has peaked, that the pace of innovation has slowed, and that MPLS is getting boring, two promising new developments—namely “MPLS in the access” and “seamless MPLS”—bring fresh excitement to service provider networks. MPLS in the access is evolutionary, but a necessary prerequisite to seamless MPLS, which has the potential to revolutionize the life cycle of service offerings.
인터맥 PB21, PB31 및 PB51은 감열타입, 견고한 모바일 프린터로 인보이스, 운송, 물류, 배달, 모바일 POS (point-of-sale) 도매, 소매 영수증, 창고관리, 재고관리 분야에 적합한 모바일 프린터 입니다.
PB21, PB31, PB51 모바일 프린터는 경쟁 모델보다 메모리가 2 배 이상이며, 최적화된 인쇄 메커니즘을 채택하여 영수증과 인보이스를 20 ~ 30 % 더 빠르게 처리할 수 있으며 로고와 같은 복잡한 그래픽도 쉽게 처리 할 수 있습니다.
안정된 인쇄를 위해 Notch, Black Mark, End-of-Roll 및 도어 열림상태 (직관적인 LCD 디스플레이를 통해 모두 전달됨)를 감지하는 온보드 센서로 PB21, PB31, PB51 프린터는 작업자가 프린터의 상태를 항상 알 수 있도록 도와줍니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, Bluetooth, 직렬, USB) 중 하나를 선택하면 환경에 맞는 인터페이스를 선택할 수 있습니다.
또한 프린터는 5피트, 26회 낙하 사양과 (6.5 피트, 옵션 보호 케이스 포함); IP54 등급이 적용되었습니다.
The industry’s fastest 2,3 and 4 inch rugged mobile receipt printers
Built rugged to survive realworld mobility in field service, route accounting and pointof- service applications
20-30% faster time-to-receipt and -invoice printing than competitive products
Low cost of development and support
Paper sensors and standard LCD display minimize lost transactions and wasted time troubleshooting
Seamless integration with Intermec computers and other mobile devices
Secure wired and wireless communication options: Bluetooth®, 802.11 b/g, USB, Serial
Optional integrated card reader supports latest EMV and ISO payment standards
SmartSystems® remote device management reduces support needs
PRINTER CHARACTERISTICS
PB21 :
Width : 101 mm (4 in)
Height : 176 mm (6.9 in)
Depth : 71 mm (2.8 in)
Weight (with battery) : 678 g (23.9oz)
PB31 :
Width : 127 mm (5 in)
Height : 182 mm (7.2 in)
Depth : 81 mm (3.2 in)
Weight (with battery) : 828 g (29.2oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides (Mil Std 810F procedure)
PB21/31: 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB21/31 : 7.4V Li-Ion, 2.3 Ah, rechargeable battery (typical)
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g (PB21/31 only)
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec) 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
USER INTERFACE
LCD and 4 buttons : standby, paper feed, setup, info Four audio status indicators: error alert, hardware change alert, button press alert and startup alert.
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥 PB22, PB32 및 PB50 모바일 프린터 제품군은 창고관리, 유통, 매장 및 기업 자산관리 분야에서 까다로운 애플리케이션을 보유한 고객에게 탁원한 선택이 될 것입니다.
인터맥 PB 프린터는 경쟁 제품보다 2~3배 빠른 인쇄속도로 작업자의 생산성과 정확성을 크게 향상시킵니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, BT, 직렬, USB)를 선택하면 사용자 환경에 맞는 인터페이스를 선택할 수 있으며, 벨트 클립, 어깨 끈, 차량 마운트 등 다양한 운반 옵션을 사용할 수 있습니다.
또한 이 인터맥 PB 시리즈 프린터는 5 피트에서 다중 낙하 사양과 IP54 등급 및 지게차 강도의 충격 및 진동 사양을 갖추고 있습니다.
The industry’s fastest 2, 3, and 4 inch rugged mobile label printers
Built rugged to survive real-world industrial and retail environments
Two to three times faster time-tofirst- label than competitive products
Low cost of development, deployment and support
Seamless integration with Intermec mobile computers and other mobile devices
Secure wired and wireless communications options: Bluetooth®, 802.11 b/g, USB, Serial
Label sensors minimize printing errors and reduce waste
SmartSystems® remote device management reduces support needs
Optimized for Intermec media, including linerless label media options
PRINTER CHARACTERISTICS
Width : 160 mm (6.3 in)
Height : 174.5 mm (6.9 in)
Depth : 78.8 mm (3.1 in)
Weight (with battery) : 1189 g (42.0 oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides
PB22/32 : 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB50: 14.8V Li-Ion, 2.2 Ah, rechargeable battery
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec), 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
MEDIA (Type : Labels or receipt media)
Labels and Tags : Duratherm II, Duratherm III, Duratherm NIR, Duratherm III IR, Duratherm III Synthetic, Duratherm III Linerless, Duratherm II 5-mil Tag
Receipts : Duratherm Receipt II, Duratherm Receipt III
Media Width Ranges : PB50: 49mm to 111.5mm (2 to 4.39 in)
Core ID : 19mm (0.75 in) standard, 10.16 mm (0.4 in) supported
Max OD : PB50: 67.3mm (2.65 in)
SOFTWARE
Programming Language
IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim (DPL), CSim (CPCL)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥 PB22, PB32 및 PB50 모바일 프린터 제품군은 창고관리, 유통, 매장 및 기업 자산관리 분야에서 까다로운 애플리케이션을 보유한 고객에게 탁원한 선택이 될 것입니다.
인터맥 PB 프린터는 경쟁 제품보다 2~3배 빠른 인쇄속도로 작업자의 생산성과 정확성을 크게 향상시킵니다.
네트워크 연결은 유선 및 무선 인터페이스 (802.11 b / g, BT, 직렬, USB)를 선택하면 사용자 환경에 맞는 인터페이스를 선택할 수 있으며, 벨트 클립, 어깨 끈, 차량 마운트 등 다양한 운반 옵션을 사용할 수 있습니다.
또한 이 프린터는 5피트에서 다중 낙하 사양과 IP54 등급 및 지게차 강도의 충격 및 진동 사양을 갖추고 있습니다.
The industry’s fastest 2, 3, and 4 inch rugged mobile label printers
Built rugged to survive real-world industrial and retail environments
Two to three times faster time-tofirst- label than competitive products
Low cost of development, deployment and support
Seamless integration with Intermec mobile computers and other mobile devices
Secure wired and wireless communications options: Bluetooth®, 802.11 b/g, USB, Serial
Label sensors minimize printing errors and reduce waste
SmartSystems® remote device management reduces support needs
Optimized for Intermec media, including linerless label media options
PRINTER CHARACTERISTICS
PB22 :
Width : 101 mm (4 in)
Height : 176 mm (6.9 in)
Depth : 71 mm (2.8 in)
Weight (with battery) : 678 g (23.9oz)
PB32 :
Width: 127 mm (5 in)
Height: 182 mm (7.2 in)
Depth: 81 mm (3.2 in)
Weight (with battery): 828 g (29.2oz)
ENVIRONMENT
Operating temperature : -15°C to 50°C (5°F to 122°F)
Storage temperature : -30°C to 70°C (-22°F to 158°F)
Humidity : 10 to 90% (non-condensing)
Sealing : IP54 (excludes paper path)
Drop spec : 1.5m (5 ft.) drops to concrete; 26 times including all corners and sides
PB22/32 : 2m (6.5 ft) multiple drops to concrete with optional protective case
POWER
PB22/32 : 7.4V Li-Ion, 2.3 Ah, rechargeable battery (typical)
MEMORY
RAM: 16MB, Flash: 64MB
STANDARD COMMUNICATIONS
RS-232 Serial
USB v.2.0
OPTIONAL COMMUNICATIONS
Bluetooth® (v2.0, Class 1)
802.11b/g
WIRELESS SECURITY
Authentication & Encryption Options : WEP (64 and 128 bit) LEAP; WPA-PSK (TKIP / RC4); WPA2/802.11i- PSK (CCMP / AES);EAP-TLS, -TTLS, -PEAP, -FAST
PRINT SPEED AND RESOLUTION
4ips (101.6mm/sec), 203 dpi (8 dots/mm)
PRINT TECHNOLOGY
Printhead : Direct thermal
CARD READER (PB21/31 Option)
3 track magnetic stripe reader supports ANSI, ISO 7811, AAMVA, CA MVA, RAW formats
EMV-compatable smart card reader is EMV 2000, ISO 7816, CCID compliant
MEDIA (Type : Labels or receipt media)
Labels and Tags : Duratherm II, Duratherm III, Duratherm NIR, Duratherm III IR, Duratherm III Synthetic, Duratherm III Linerless, Duratherm II 5-mil Tag
Receipts : Duratherm Receipt II, Duratherm Receipt III
Media Width Ranges : PB22: 25.4mm to 55.88mm (1 to 2.2 in)
Core ID : 19mm (0.75 in) standard, 10.16 mm (0.4 in) supported
Max OD : PB22: 57.2mm (2.25 in)
SOFTWARE
Programming Language
IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim (DPL), CSim (CPCL)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
ACHIEVING THE VISION OF 80 PERCENT RENEWABLES BY 2030 SRILANKAPrivate Consultants
a draft report to be presented to President of Sri Lanka, Gotabaya Rajapaksha, by State Minister of Renewable Energy, Duminda Dissanayake in September 2020, outlining the state of renewable energy in Sri Lanka
Class lecture by Prof. Raj Jain on Carrier Ethernet. The talk covers Options to Connect Two Data Centers?, Plesiochronous Digital Hierarchy (PDH), SONET/SDH, Multiprotocol Label Switching (MPLS), Label Switching Example, IP over MPLS over Ethernet, Martini Draft, Pseudo Wire: L2 Circuits over IP, Ethernet over PWE3 over MPLS, Virtual Private LAN Service (VPLS), Differentiated Services, Carriers vs. Enterprise, Issue: UNI vs Peer-to-Peer Signaling, UNI vs. ENNI, Operator Virtual Connection (OVC), Metro Access Ethernet Private Line, End-to-End Metro Ethernet Connection, Ethernet Virtual Connections (EVCs), Metro Ethernet Service Attributes, Metro Ethernet OAM, Metro Ethernet OAM Messages, Metro Ethernet Use Cases, Ethernet Provider Bridge (PB), Provider Backbone Network (PBB), MAC-in-MAC Frame Format, PBB Service Instance, Connection Oriented Ethernet, VLAN Cross-Connect, PBB-TE, PBB-TE QoS, Ethernet Tagged Frame Format Evolution, Comparison of Technologies. Video recording available in YouTube.
Architectural Options for Metro Carrier-Ethernet Network Buildout: Analysis &...Vishal Sharma, Ph.D.
This workshop is one of the first that we're aware of to give a detailed taxonomy & analysis of deployment options for Carrier Ethernet-based metro/access networks, in one place. We elaborate each option addressing questions like: network architectures possible? Is other supporting technology needed? Or, is it standalone for the applications/services a provider might run, and so on.
MPLS-TP is subset of MPLS. It uses the same data plane as used by MPLS (Defined in RFC 3031 and RFC 3032). MPLS-TP has four major areas:-
1. Data Plane
2. Control Plane
3. O&M
4. Survivability
MPLS-TP has no control plane, the reason for this was that the recovery. If the dynamic control plane is used, in that case the convergence would depend on the dynamic protocol and providers cannot leverage the <50 ms failover time in that case. It uses the same QoS diffserv model except uniform model as used in MPLS.
A presentation given by RAD’s CTO, Dr. Yaakov Stein, at the 2012 MPLS and Ethernet World Congress. The presentation compares the two technologies in ten critical categories and grades them on suitability, coverage and maturity
MetaFabric™ Architecture Virtualized Data Center: Design and Implementation G...Juniper Networks
The benefits of virtualization are driving data center operators to rethink their legacy data center networks and look for new ways to reduce costs and improve efficiency in the data center. Moving from a legacy network to a state-of-the-art solution allows you to deploy new applications in seconds rather than days, weeks, or months. If you want to harness the power of virtualization in your data center network, this guide will help you to achieve your goal.
The IT industry has gained significant efficiency and flexibility as a direct result of virtualization. Organizations are moving toward a virtual datacenter (VDC) model, and flexibility, speed, scale and automation are central to their success. Although compute and memory resources are pooled and automated, networks and network services, such as security, have not kept pace. Traditional network and security operations not only reduce efficiency but also limit the ability of businesses to rapidly deploy, scale and protect applications. VMware vCloud® Networking and Security™ offers a network virtualization solution to overcome these challenges. This paper describes various components of the network virtualization solution and explains one of the key technology - VXLAN. It also provides design considerations that will help virtualization and network architects deploy this solution successfully in their environment.
This whitepaper features the transition from traditional networking to software-defined networking or SDN. Find outlines of next-generation architectures.
Why Juniper, Driven by Mist AI, Leads the MarketJuniper Networks
While the rest of the industry has started to copy our AIOps Client to Cloud message recently, we understand that others are nowhere close to delivering on the promise of the AI-Driven Enterprise, both in terms of depth of features and breadth of portfolio. Take a look at this SlideShare to truly understand why Juniper, driven by Mist AI, leads the market.
Experiences are everything and Juniper knows this. From when a user engages with an app on their smartphone to when a workload is generated in the cloud to pick up the request, we know that every point of contact along the way impacts the user’s experience, from client to cloud. Learn more about what Juniper has recently announced in this SlideShare!
As much the workforce continues to work remotely, The COVID-19 Pandemic has taught us that the WAN is more important than ever, and troubleshooting it couldn’t be more difficult. Learn how MARVIS & Mist AI simplify the burdensome process of troubleshooting the WAN.
Real AI. Real Results. Mist AI Customer Testimonials.Juniper Networks
See what Juniper customers have to say about how Mist AI has statistically improved the way they run their business. For more information on how Mist AI can improve your network, join us for Transformation Thursdays at: https://www.juniper.net/us/en/forms/ai-driven-demo/
Juniper Networks is introducing the fourth expansion of the AI-driven enterprise to bring artificial intelligence to the LAN, WLAN and now WAN for end-to-end optimization of user experiences and proactive troubleshooting driven by Mist AI.
With the new Juniper Mist WAN Assurance service, customers will receive even better automation and insight in branch locations with AI-driven service level expectations, client-to-cloud event correlation for rapid fault resolution, anomaly detection, and proactive support.
Are you able to deliver reliable experiences for connected devicesJuniper Networks
Here are 5 things you can do with Mist Wired Assurance. With Wired Assurance, you can leverage Juniper EX switch telemetry to enable simpler operations, shorter mean time to repair, and better visibility into end-user experiences for your connected devices, including access points, servers, and IoT endpoints.
It's time to scale way back on those support tickets from your branch users. Security shouldn’t come at the cost of performance. Register now to attend a live demo. You may be eligible to receive a free SRX!
https://www.juniper.net/sdwan-thursdays
Securing IoT at Scale Requires a Holistic ApproachJuniper Networks
Enterprises are moving from small IoT pilots to large-scale
implementations. What are the biggest security
concerns, and how can you overcome them?
Juniper partnered with the IoT Institute to find out. We surveyed 176 technology decision makers and
influencers who have been personally involved in their IoT security strategy and implementations. Here's what the survey found:
We recently conducted a 16-country survey to gauge the appetite for Digital Cohesion. The results suggest business and consumer users see Digital Cohesion as an inevitable, positive societal development.
SDN and NFV: Transforming the Service Provider OrganizationJuniper Networks
As competition increases, service providers must be able to respond quickly to competitive pressures and rapidly evolving customer demands. Learn how NFV and SDN allows service providers to embrace a holistic approach to their business transformation and maximize existing capabilities: http://juni.pr/1JQZYOl
Navigating the Uncertain World Facing Service Providers - Juniper's PerspectiveJuniper Networks
Service providers are facing more and more pressure as customers demand immediacy. Learn how adopting a carrier-grade, open network platform closes the innovation gap to create value for your network. http://juni.pr/1JQZYOl
Network service providers—those with access networks like DSL, cable, or mobile—continue
to face a dual threat: rising operating expenses associated with explosive bandwidth growth
and declining revenues driven by commoditization. A true Telco cloud, featuring automation
and dynamic scalability, becomes a comprehensive delivery platform enabling network service
providers to offer differentiated services that solve their customer’s business demands.
With mobile subscriptions expected to reach 8.5 billion users by the end of 2016, mobile attack surfaces are growing at an alarming rate. Juniper’s SRX5800 is primed for this increase - with speeds up to 2 Tbps the SRX5800 enables customers to inspect more traffic faster. Mobile has met its match. http://juni.pr/1MKBQDu
High performance data center computing using manageable distributed computingJuniper Networks
Terrapin Trading Show Chicago, Thursday, June 4
Andy Bach, FSI Architect, Juniper Networks
Distributed computing concepts (QFX5100-AA)
Scale and performance enhancements (QFX10000 Series)
Automation capabilities (tie in QFX-PFA)
Larry Van Deusen, Director of the Network Integration Business Unit, Dimension Data
Automation
Value Added Partner Services
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Enhancing Performance with Globus and the Science DMZGlobus
ESnet has led the way in helping national facilities—and many other institutions in the research community—configure Science DMZs and troubleshoot network issues to maximize data transfer performance. In this talk we will present a summary of approaches and tips for getting the most out of your network infrastructure using Globus Connect Server.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.