Transportation and Sustainability: EVs and the SmartGrid JohnThornton CleanFuture 090505
•
3 likes•3,811 views
The document discusses how electric vehicles (EVs) and smart grid technology can help increase sustainability. EVs can reduce environmental impacts by using electricity, which can be generated from renewable sources, instead of gasoline. A smart grid allows electric utilities to manage electricity flow to and from EVs in a way that integrates renewable energy and reduces strain on the grid during high demand periods. Widespread adoption of EVs could create new jobs and businesses related to smart grid integration and clean vehicle technologies.
Report
Share
Report
Share
![Transportation and Sustainability: Electric Vehicles (EVs) and the Smart Grid as Enabling Technologies John A. Thornton [email_address] Clean Energy Special Interest Group Oregon TiE (The Indus Entrepreneurs) Portland, Oregon USA May 5, 2009 Oregon TiE - Smart Grid / EV Presentation by John Thornton](https://image.slidesharecdn.com/transportationandsustainability-evsandthesmartgrid090505-johnthorntoncleanfuture-publicversion-090507141931-phpapp02/85/Transportation-and-Sustainability-EVs-and-the-SmartGrid-JohnThornton-CleanFuture-090505-1-320.jpg)
![Overview ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Oregon TiE - Smart Grid / EV Presentation by John Thornton](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
EV Smart Charging Considerations: Oregon Alternative Fuels Infrastructure Wor...
EV Smart Charging Considerations - Progress Report for Discussion to Oregon's Alternative Fuel Infrastructure Working Group on June 19, 2009
Department of Defense Plug In Electric Vehicle Program
Dr. Camron Gorguinpour, Director of the DoD's PEV Program, presented at Drive Oregon's October event. Here is his presentation, highlighting the various activities of the DoD around PEV deployment, V2G pilots, and more.
Opportunities for v2 g integrating plug-in vehicles and the electric grid (to...
CALSTART New Fuel Program Manager, Dr Jasna Tomic, presented on vehicle-to-grid technology at UCLA in April 2011. In this presentation, Dr Tomic addresses some of the barriers and opportunities to use battery power generated by a new generation of electric vehicles by putting it back onto the grid.
Αντώνης Αδάναλης, Auto Forum 2021
Ομιλία - Παρουσίαση:«BMW και ηλεκτροκίνηση στην Ελλάδα»
Αντώνης Αδάναλης, Sales Operations & Electro-Mobility Manager, BMW Group Hellas
The Convergence Of Transport, The Built Environment And The Smart Grid by Joh...
The document discusses the convergence of transportation, the built environment, and the smart grid with a focus on electric vehicles (EVs) and their role in grid modernization. It notes that EVs could drive faster adoption of smart grid technologies and help integrate more renewable energy. The document outlines various EV and charging scenarios and how vehicles could provide grid services like frequency regulation through vehicle-to-grid technologies. It presents a case study of a potential smart grid community and concludes that smart charging is needed before vehicle-to-grid can become widely viable.
Liana Cipcigan - Grid Integration of Electric Vehicles
This document summarizes research into the grid integration of electric vehicles. The research team aims to analyze how many EVs there may be, when and where they will charge, and evaluate infrastructure challenges and options for managing EV load. Experimental work and framework development will validate algorithms for intelligent charging and synergies with smart grids. An integrated model looks at automotive R&D, social impacts, electricity markets and intelligent infrastructure. The team analyzes impacts of EV penetration on distribution and generation systems using UK and Spanish case studies for 2030. Uncontrolled EV charging could increase peak demand significantly but controlled approaches may reduce impacts.
Freewire Berkeley final presentation
The document outlines a business plan for a startup developing a wireless EV charging solution called Mobi. The company conducted extensive customer research including over 100 interviews and traveled over 6,600 miles. Their solution aims to make EV charging more convenient and scalable by using autonomous robotic chargers that can move to vehicles. The business model canvas details potential partners, activities, value propositions, customer relationships, segments, resources, channels, cost structure, and revenue streams as the company tests various hypotheses to refine their model.
EV-Readiness & Building Codes by Eric Huang
This document summarizes a webinar about EV readiness and building codes. It discusses why building codes should address EV readiness to support increased EV adoption. Key points include:
- Building codes are adopted by states/municipalities and generally updated every 3 years. They include requirements for electrical capacity and infrastructure.
- EV readiness in building codes is important because home charging can help fill gaps in public and workplace charging availability. It also avoids high retrofit costs.
- The webinar reviews examples of EV readiness code language adopted in places like Vancouver, California, Washington, Seattle, and Oregon. These generally require a percentage of new parking spaces to include EV charging infrastructure or conduit.
- Fact
Recommended
EV Smart Charging Considerations: Oregon Alternative Fuels Infrastructure Wor...
EV Smart Charging Considerations - Progress Report for Discussion to Oregon's Alternative Fuel Infrastructure Working Group on June 19, 2009
Department of Defense Plug In Electric Vehicle Program
Dr. Camron Gorguinpour, Director of the DoD's PEV Program, presented at Drive Oregon's October event. Here is his presentation, highlighting the various activities of the DoD around PEV deployment, V2G pilots, and more.
Opportunities for v2 g integrating plug-in vehicles and the electric grid (to...
CALSTART New Fuel Program Manager, Dr Jasna Tomic, presented on vehicle-to-grid technology at UCLA in April 2011. In this presentation, Dr Tomic addresses some of the barriers and opportunities to use battery power generated by a new generation of electric vehicles by putting it back onto the grid.
Αντώνης Αδάναλης, Auto Forum 2021
Ομιλία - Παρουσίαση:«BMW και ηλεκτροκίνηση στην Ελλάδα»
Αντώνης Αδάναλης, Sales Operations & Electro-Mobility Manager, BMW Group Hellas
The Convergence Of Transport, The Built Environment And The Smart Grid by Joh...
The document discusses the convergence of transportation, the built environment, and the smart grid with a focus on electric vehicles (EVs) and their role in grid modernization. It notes that EVs could drive faster adoption of smart grid technologies and help integrate more renewable energy. The document outlines various EV and charging scenarios and how vehicles could provide grid services like frequency regulation through vehicle-to-grid technologies. It presents a case study of a potential smart grid community and concludes that smart charging is needed before vehicle-to-grid can become widely viable.
Liana Cipcigan - Grid Integration of Electric Vehicles
This document summarizes research into the grid integration of electric vehicles. The research team aims to analyze how many EVs there may be, when and where they will charge, and evaluate infrastructure challenges and options for managing EV load. Experimental work and framework development will validate algorithms for intelligent charging and synergies with smart grids. An integrated model looks at automotive R&D, social impacts, electricity markets and intelligent infrastructure. The team analyzes impacts of EV penetration on distribution and generation systems using UK and Spanish case studies for 2030. Uncontrolled EV charging could increase peak demand significantly but controlled approaches may reduce impacts.
Freewire Berkeley final presentation
The document outlines a business plan for a startup developing a wireless EV charging solution called Mobi. The company conducted extensive customer research including over 100 interviews and traveled over 6,600 miles. Their solution aims to make EV charging more convenient and scalable by using autonomous robotic chargers that can move to vehicles. The business model canvas details potential partners, activities, value propositions, customer relationships, segments, resources, channels, cost structure, and revenue streams as the company tests various hypotheses to refine their model.
EV-Readiness & Building Codes by Eric Huang
This document summarizes a webinar about EV readiness and building codes. It discusses why building codes should address EV readiness to support increased EV adoption. Key points include:
- Building codes are adopted by states/municipalities and generally updated every 3 years. They include requirements for electrical capacity and infrastructure.
- EV readiness in building codes is important because home charging can help fill gaps in public and workplace charging availability. It also avoids high retrofit costs.
- The webinar reviews examples of EV readiness code language adopted in places like Vancouver, California, Washington, Seattle, and Oregon. These generally require a percentage of new parking spaces to include EV charging infrastructure or conduit.
- Fact
SCALING TO MEET THE COMING TIDAL WAVE OF NEED FOR EVSE
The document discusses the inadequate state of electric vehicle charging infrastructure in the US and the challenges in scaling up to meet growing demand. It notes that while 2 million EVs were on US roads by late 2021, the ratio of public chargers is only 1 per 20 EVs currently, and will worsen to 1 per 40 EVs by late 2022. Building out the necessary millions of private chargers (95% of the market) at locations like apartments, offices and fleets is difficult due to limited electrical capacity at most sites and high costs of upgrades. Data-driven, real-time power management is needed to maximize the number of chargers per site within the existing power constraints.
HOW NEXT-GENERATION INDUCTIVE CHARGING IS ACCELERATING TRANSITION TO CLEANER ...
- WAVE has deployed the largest wireless inductive charging system for electric buses in the US, powering 47 buses across a 100 square mile service area. Their system provides over 400 miles of added range during bus operations.
- Wireless inductive charging solves key problems with electrifying medium and heavy-duty fleets by providing contactless, hands-free charging that reduces costs, improves safety, and alleviates range and capacity issues compared to conductive charging alternatives.
- WAVE has been scaling their wireless power levels from 50kW to over 500kW to meet the needs of various vehicle classes from transit buses to drayage trucks, and their technology is enabling all-electric operations across applications like ports,
PEV Charging Implementation for the City of Berkeley - August 2013
This document discusses potential sites for installing electric vehicle charging stations in Berkeley, California. It analyzes Berkeley demographics and transit infrastructure to identify four optimal census tracts for initial charging station development. Two specific sites are proposed - a parking garage in North Berkeley and a residential area in Southeast Berkeley. Additional opportunity sites in mixed commercial/residential areas on Solano Avenue and Webster Street are also discussed. The document evaluates the feasibility of installing charging stations at the sites and outlines supporting state legislation and funding programs.
Q1 2020 Utility Working Group Presentation
Patricia Taylor, Sr. Manager of Regulatory Policy and Business Programs at the American Public Power Institute, Thor Hinckley, Sr. Program Manager at Forth and Connor Herman, Program Manager at Forth gave this presentation at the Utility Working Group webinar on March 17, 2020.
DEVELOPING AN EV CHARGING STATION: A TECHNICAL AND REGULATORY OVERVIEW
Federal and state policies are exponentially growing EV adoption, driving increased electric grid demand. As EV charging loads grow, electric utilities need solutions for managing loads and integrating distributed energy resources. Sargent & Lundy discusses technical considerations for developing EV policy, including analyzing electric grid impacts of EV penetration, developing interconnect standards, and designing EV stations with renewable generation and battery storage to minimize grid upgrades.
GLOBAL LANDSCAPE OF EVSE MARKET
This document summarizes a presentation on the global EVSE market landscape. It provides an overview of Power Technology Research as the research background. It then discusses definitions related to EV charging infrastructure, forecasts the global EVSE market size and revenue between 2020-2030, and examines trends in public and private EV charging stations. Regional market trends are presented, including an analysis of the EVSE market in the Americas, EMEA, and APAC regions. Finally, it analyzes the state of EV charging infrastructure in the USA, including various incentives and utility investments supporting adoption.
Jared Kearby - Power Technology Research
This document summarizes the impacts of electric vehicle adoption on automotive manufacturing. As EVs gain market share, they will significantly impact the industry by reducing the number of components needed in vehicles. This will decrease demand for machine tools used to produce internal combustion engine parts but increase demand for tools producing EV components. Automotive machine tool manufacturers must pursue vertical integration and investments in new revenue sources to adapt to these changes in the automotive supply chain. By 2035, components like gearboxes and engines face high risk of reduced demand due to EVs.
Oregon Electric Vehicle Roadmap
Beaverton Living Greener Electric Vehicle Roadmap. Presented April 10th, 2010 at Beaverton Oregon City Hall.
Presented by:
George K Beard
Executive Leadership Institute
Hatfield School of Government
See the 27 minute video of the presentation here:
http://tinyurl.com/y6k3c9s
Electric Power Industry In Transition
An interesting insight into how the electricity utility has undergone a major transition from a practising manager in the utility industry.
EV CHARGING - HOW FAST IS FAST ENOUGH ?
This document discusses electric vehicle charging trends and infrastructure needs. It finds that Level 2 charging, which provides charging at around 7 miles per hour, is sufficient to meet the needs of most passenger electric vehicles, as over 80% of daily driving distances are under 100 miles. Level 2 charging is also more cost effective to install than faster Level 3 charging. While Level 3 fast charging is necessary for longer distance driving, the document concludes that Level 2 charging ports should be the focus of infrastructure expansion, as they can meet the needs of the vast majority of passenger EVs and support the projected growth of electric vehicles to 15 million by 2030 in a cost efficient way.
California Energy Commission: (Preparing for Bi-Directional EV Energy Future)...
EV Grid participates in a number of Vehicle Grid Integration projects including V2G and Battery 2nd Life that optimize the value of electric vehicle batteries to EV owners, the utility grid and provide compounded GHG savings.
This presentation provides and update to the Commission on two such projects: University of Delaware Grid-on-Wheels demonstration and Clinton Global Initiative - V2G School Buses.
Energy Storage North America 2014: Realizing Vehicle Grid Integration: Key T...
Paul Stith - Director, Business Development & Regulatory Affairs @ EV Grid - Realizing Vehicle Grid Integration: Key Technical and Policy Issues.
Using Electric Vehicles as a grid resource. Project summaries, education, policy and technical challenges / opportunities.
Electric Vehicle Grid Simulator
This presentation details current models available for integrating electric vehicles onto the grid, case studies and possible improvements for future models.
EV CHARGING INFRASTRUCTURE - INDUSTRY TRENDS
This document provides an overview of ANS Advanced Network Services and their presentation on building reliable EV charging infrastructure. It discusses ANS's history and services, funding available for EV charging infrastructure from federal and state governments, current charging technologies like the ChargeBox fast charger, and opportunities for deploying charging infrastructure for commercial fleets and the public. The presentation also covers vehicle-to-grid and vehicle-to-everything concepts to better utilize EVs for grid services.
Energy Storage in the Fast Lane
V2G School Bus & V2x Project Updates First Annual California Multi-Agency Update on Vehicle-Grid Integration Research , November 19, 2014
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...World Resources Institute (WRI)
Presentation by Lori Bird and Norma Hutchinson, World Resources Institute
Clean Power Council Meeting, Columbus, Ohio
July 9, 2019PhD Projects in Electrical Research Topics
Prevalent Fields in Electrical Projects
Eye Catchy Concepts in Electrical Projects
Most Hottest Topics in Electrical Projects
Pacific Northwest Affordable Mobility Platform (PNW AMP) by Connor Herman
This document summarizes the Pacific Northwest Affordable Mobility Platform (PNW AMP) project. The PNW AMP aims to combine electric vehicle test drives and utility-sponsored car sharing to increase familiarity with EVs, especially in rural areas. It is a 2-year project that will deploy 10 EVs across multiple sites in Oregon and Washington. The project aims to increase EV exposure, lower the cost per test drive, optimize vehicle utilization, and increase EV conversions. It will allow users to reserve EVs through an app for self-service test drives and low-cost hourly rentals. The project has received additional funding to expand the model to 80 EVs across 8 US cities over 3 years.
IRJET- Electrical Vehicle Charging by Electromagnetic Induction Via Loosely C...
This document discusses a proposed method for wirelessly charging electric vehicles using electromagnetic induction through loosely coupled coils. The system would involve large buses traveling along highways and roads that are equipped with transmitting coils that can inductively charge receiving coils in electric vehicles as they pass by or follow the bus. The document outlines the basic components and design of such a wireless charging system, including transmitter and receiver circuits that use resonant magnetic coupling between coils tuned to the same frequency to transfer power over short distances. It also reviews some of the benefits of wireless charging systems and opportunities for further research on electric vehicle charging applications.
Clean + Modern Grid by Garrett Fitzgerald
Garrett Fitzgerald, Sr Director, Electrification at SEPA gave this presentation at the PNW Utility Roundtable on December 09, 2021.
Upload
Vehicle-to-grid (V2G) technology allows electric vehicles to transmit power back to the electricity grid or to have their battery charged by the grid. Two-way power flow between electric vehicles and the grid can benefit both parties. V2G enables electric vehicles to store and supply electricity to the grid during peak demand periods in a way that earns revenue for owners and supports the stability and reliability of the electric grid.
V2G Opportunities And Impacts E3 2008 S Mullen
The document discusses vehicle-to-grid opportunities and impacts, including how plug-in hybrid electric vehicles (PHEVs) can provide power to the electric grid through two-way communication. PHEVs could supply power for ancillary grid services, reduce peak loads, and help integrate renewable energy. The author models how aggregated PHEVs could support the electric system and designs vehicle controls to optimize energy use while meeting driver needs. Batteries in PHEVs are seen as ideal for short-term grid services and providing customer choice if communication and control infrastructure is improved.
More Related Content
What's hot
SCALING TO MEET THE COMING TIDAL WAVE OF NEED FOR EVSE
The document discusses the inadequate state of electric vehicle charging infrastructure in the US and the challenges in scaling up to meet growing demand. It notes that while 2 million EVs were on US roads by late 2021, the ratio of public chargers is only 1 per 20 EVs currently, and will worsen to 1 per 40 EVs by late 2022. Building out the necessary millions of private chargers (95% of the market) at locations like apartments, offices and fleets is difficult due to limited electrical capacity at most sites and high costs of upgrades. Data-driven, real-time power management is needed to maximize the number of chargers per site within the existing power constraints.
HOW NEXT-GENERATION INDUCTIVE CHARGING IS ACCELERATING TRANSITION TO CLEANER ...
- WAVE has deployed the largest wireless inductive charging system for electric buses in the US, powering 47 buses across a 100 square mile service area. Their system provides over 400 miles of added range during bus operations.
- Wireless inductive charging solves key problems with electrifying medium and heavy-duty fleets by providing contactless, hands-free charging that reduces costs, improves safety, and alleviates range and capacity issues compared to conductive charging alternatives.
- WAVE has been scaling their wireless power levels from 50kW to over 500kW to meet the needs of various vehicle classes from transit buses to drayage trucks, and their technology is enabling all-electric operations across applications like ports,
PEV Charging Implementation for the City of Berkeley - August 2013
This document discusses potential sites for installing electric vehicle charging stations in Berkeley, California. It analyzes Berkeley demographics and transit infrastructure to identify four optimal census tracts for initial charging station development. Two specific sites are proposed - a parking garage in North Berkeley and a residential area in Southeast Berkeley. Additional opportunity sites in mixed commercial/residential areas on Solano Avenue and Webster Street are also discussed. The document evaluates the feasibility of installing charging stations at the sites and outlines supporting state legislation and funding programs.
Q1 2020 Utility Working Group Presentation
Patricia Taylor, Sr. Manager of Regulatory Policy and Business Programs at the American Public Power Institute, Thor Hinckley, Sr. Program Manager at Forth and Connor Herman, Program Manager at Forth gave this presentation at the Utility Working Group webinar on March 17, 2020.
DEVELOPING AN EV CHARGING STATION: A TECHNICAL AND REGULATORY OVERVIEW
Federal and state policies are exponentially growing EV adoption, driving increased electric grid demand. As EV charging loads grow, electric utilities need solutions for managing loads and integrating distributed energy resources. Sargent & Lundy discusses technical considerations for developing EV policy, including analyzing electric grid impacts of EV penetration, developing interconnect standards, and designing EV stations with renewable generation and battery storage to minimize grid upgrades.
GLOBAL LANDSCAPE OF EVSE MARKET
This document summarizes a presentation on the global EVSE market landscape. It provides an overview of Power Technology Research as the research background. It then discusses definitions related to EV charging infrastructure, forecasts the global EVSE market size and revenue between 2020-2030, and examines trends in public and private EV charging stations. Regional market trends are presented, including an analysis of the EVSE market in the Americas, EMEA, and APAC regions. Finally, it analyzes the state of EV charging infrastructure in the USA, including various incentives and utility investments supporting adoption.
Jared Kearby - Power Technology Research
This document summarizes the impacts of electric vehicle adoption on automotive manufacturing. As EVs gain market share, they will significantly impact the industry by reducing the number of components needed in vehicles. This will decrease demand for machine tools used to produce internal combustion engine parts but increase demand for tools producing EV components. Automotive machine tool manufacturers must pursue vertical integration and investments in new revenue sources to adapt to these changes in the automotive supply chain. By 2035, components like gearboxes and engines face high risk of reduced demand due to EVs.
Oregon Electric Vehicle Roadmap
Beaverton Living Greener Electric Vehicle Roadmap. Presented April 10th, 2010 at Beaverton Oregon City Hall.
Presented by:
George K Beard
Executive Leadership Institute
Hatfield School of Government
See the 27 minute video of the presentation here:
http://tinyurl.com/y6k3c9s
Electric Power Industry In Transition
An interesting insight into how the electricity utility has undergone a major transition from a practising manager in the utility industry.
EV CHARGING - HOW FAST IS FAST ENOUGH ?
This document discusses electric vehicle charging trends and infrastructure needs. It finds that Level 2 charging, which provides charging at around 7 miles per hour, is sufficient to meet the needs of most passenger electric vehicles, as over 80% of daily driving distances are under 100 miles. Level 2 charging is also more cost effective to install than faster Level 3 charging. While Level 3 fast charging is necessary for longer distance driving, the document concludes that Level 2 charging ports should be the focus of infrastructure expansion, as they can meet the needs of the vast majority of passenger EVs and support the projected growth of electric vehicles to 15 million by 2030 in a cost efficient way.
California Energy Commission: (Preparing for Bi-Directional EV Energy Future)...
EV Grid participates in a number of Vehicle Grid Integration projects including V2G and Battery 2nd Life that optimize the value of electric vehicle batteries to EV owners, the utility grid and provide compounded GHG savings.
This presentation provides and update to the Commission on two such projects: University of Delaware Grid-on-Wheels demonstration and Clinton Global Initiative - V2G School Buses.
Energy Storage North America 2014: Realizing Vehicle Grid Integration: Key T...
Paul Stith - Director, Business Development & Regulatory Affairs @ EV Grid - Realizing Vehicle Grid Integration: Key Technical and Policy Issues.
Using Electric Vehicles as a grid resource. Project summaries, education, policy and technical challenges / opportunities.
Electric Vehicle Grid Simulator
This presentation details current models available for integrating electric vehicles onto the grid, case studies and possible improvements for future models.
EV CHARGING INFRASTRUCTURE - INDUSTRY TRENDS
This document provides an overview of ANS Advanced Network Services and their presentation on building reliable EV charging infrastructure. It discusses ANS's history and services, funding available for EV charging infrastructure from federal and state governments, current charging technologies like the ChargeBox fast charger, and opportunities for deploying charging infrastructure for commercial fleets and the public. The presentation also covers vehicle-to-grid and vehicle-to-everything concepts to better utilize EVs for grid services.
Energy Storage in the Fast Lane
V2G School Bus & V2x Project Updates First Annual California Multi-Agency Update on Vehicle-Grid Integration Research , November 19, 2014
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...World Resources Institute (WRI)
Presentation by Lori Bird and Norma Hutchinson, World Resources Institute
Clean Power Council Meeting, Columbus, Ohio
July 9, 2019PhD Projects in Electrical Research Topics
Prevalent Fields in Electrical Projects
Eye Catchy Concepts in Electrical Projects
Most Hottest Topics in Electrical Projects
Pacific Northwest Affordable Mobility Platform (PNW AMP) by Connor Herman
This document summarizes the Pacific Northwest Affordable Mobility Platform (PNW AMP) project. The PNW AMP aims to combine electric vehicle test drives and utility-sponsored car sharing to increase familiarity with EVs, especially in rural areas. It is a 2-year project that will deploy 10 EVs across multiple sites in Oregon and Washington. The project aims to increase EV exposure, lower the cost per test drive, optimize vehicle utilization, and increase EV conversions. It will allow users to reserve EVs through an app for self-service test drives and low-cost hourly rentals. The project has received additional funding to expand the model to 80 EVs across 8 US cities over 3 years.
IRJET- Electrical Vehicle Charging by Electromagnetic Induction Via Loosely C...
This document discusses a proposed method for wirelessly charging electric vehicles using electromagnetic induction through loosely coupled coils. The system would involve large buses traveling along highways and roads that are equipped with transmitting coils that can inductively charge receiving coils in electric vehicles as they pass by or follow the bus. The document outlines the basic components and design of such a wireless charging system, including transmitter and receiver circuits that use resonant magnetic coupling between coils tuned to the same frequency to transfer power over short distances. It also reviews some of the benefits of wireless charging systems and opportunities for further research on electric vehicle charging applications.
Clean + Modern Grid by Garrett Fitzgerald
Garrett Fitzgerald, Sr Director, Electrification at SEPA gave this presentation at the PNW Utility Roundtable on December 09, 2021.
What's hot (20)
SCALING TO MEET THE COMING TIDAL WAVE OF NEED FOR EVSE
SCALING TO MEET THE COMING TIDAL WAVE OF NEED FOR EVSE
HOW NEXT-GENERATION INDUCTIVE CHARGING IS ACCELERATING TRANSITION TO CLEANER ...
HOW NEXT-GENERATION INDUCTIVE CHARGING IS ACCELERATING TRANSITION TO CLEANER ...
PEV Charging Implementation for the City of Berkeley - August 2013
PEV Charging Implementation for the City of Berkeley - August 2013
DEVELOPING AN EV CHARGING STATION: A TECHNICAL AND REGULATORY OVERVIEW
DEVELOPING AN EV CHARGING STATION: A TECHNICAL AND REGULATORY OVERVIEW
California Energy Commission: (Preparing for Bi-Directional EV Energy Future)...
California Energy Commission: (Preparing for Bi-Directional EV Energy Future)...
Energy Storage North America 2014: Realizing Vehicle Grid Integration: Key T...
Energy Storage North America 2014: Realizing Vehicle Grid Integration: Key T...
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...
Charging Electric Vehicles with Renewables: Emerging Strategies to Meet Custo...
Pacific Northwest Affordable Mobility Platform (PNW AMP) by Connor Herman
Pacific Northwest Affordable Mobility Platform (PNW AMP) by Connor Herman
IRJET- Electrical Vehicle Charging by Electromagnetic Induction Via Loosely C...
IRJET- Electrical Vehicle Charging by Electromagnetic Induction Via Loosely C...
Viewers also liked
Upload
Vehicle-to-grid (V2G) technology allows electric vehicles to transmit power back to the electricity grid or to have their battery charged by the grid. Two-way power flow between electric vehicles and the grid can benefit both parties. V2G enables electric vehicles to store and supply electricity to the grid during peak demand periods in a way that earns revenue for owners and supports the stability and reliability of the electric grid.
V2G Opportunities And Impacts E3 2008 S Mullen
The document discusses vehicle-to-grid opportunities and impacts, including how plug-in hybrid electric vehicles (PHEVs) can provide power to the electric grid through two-way communication. PHEVs could supply power for ancillary grid services, reduce peak loads, and help integrate renewable energy. The author models how aggregated PHEVs could support the electric system and designs vehicle controls to optimize energy use while meeting driver needs. Batteries in PHEVs are seen as ideal for short-term grid services and providing customer choice if communication and control infrastructure is improved.
APPLICATION OF PHEVs FOR SMART GRID IN INDIAN POWER SECTOR1
This document discusses the application of plug-in hybrid electric vehicles (PHEVs) for smart grids in the Indian power sector. It describes how PHEVs can help with demand side management by charging from renewable energy sources and providing power back to the grid. The document also examines issues like harmonic distortion caused by PHEV charging and its impact on transformers. It proposes a distributed strategy for PHEV charging and discharging that involves regional dispatch centers and charging stations. Finally, it suggests that introducing electric 2-wheelers widely in India first could significantly reduce household power demand.
2013 EDTA V2G Panel_Jayanthi v3.0
This document discusses opportunities for electric vehicle (EV) charging infrastructure and vehicle-to-grid (V2G) technology. It notes that greater adoption of renewable energy and efforts to improve grid efficiency have increased demand for customer demand management solutions, making V2G a promising option. An integrated home solution could manage energy use and enable V2G benefits. V2G infrastructure could allow EVs to support the grid during peak demand periods using stored battery power, helping supplement generation and reduce the need for load shedding. Aggregating many EVs could provide substantial benefits to utilities and grid stability with renewable energy integration.
Form A Wall Presentation Short
Sterling Homes Australia is proud to announce the availability of Form-A-Wall in Australia. Form-A-Wall is a formulated concrete construction system that is cost effective, quick to install, and structurally superior to conventional building methods. It provides benefits such as termite resistance, high wind ratings, fire resistance, and predictable construction timelines. Form-A-Wall can be used for a variety of residential and commercial building applications including houses, townhouses, high-rise buildings, fencing, and more.
Urban electrification -_report-2016
This document analyzes four scenarios for decarbonizing the energy system of an urban area by 2050: Biofuel, Mix, Heat Pumps, and All-Electric. It finds that all scenarios require large investments in building renovation, transportation electrification, and renewable energy infrastructure but have similar total annual costs of €280-310 million. Electrification scenarios have lower energy demands and costs that are less sensitive to fuel prices but require more investment in electric networks and technologies. Deep building renovation is essential to reduce peak energy demands across scenarios. A diversified, low-carbon energy supply is recommended to minimize investment risks.
field study of rcc structures
The document summarizes a field study of an RCC construction project. It describes various aspects of the construction that were not in compliance with IS codes, including improper reinforcement bending, insufficient concrete mixing time, improper brick soaking, and lack of awareness of code requirements. The conclusion is that due to lack of awareness of and time constraints, the IS code was not always followed in the project.
Construction stage analysis of rcc frames project report
While analyzing a multistorey building frame, conventionally all the probable loads are applied after modeling the entire building frame. But in practice the frame is constructed in various stages. Accordingly, the stability of frame varies at every construction stage. Even during construction freshly placed concrete floor is supported by previously cast floor by formwork. Thus, the loads assumed in conventional analysis will vary in transient situation. Obviously, results obtained by the traditional analysis will be unsuitable. Therefore, the frame should be analyzed at every construction stage taking into account variation in loads. The phenomenon known as Construction Stage Analysis considers these uncertainties precisely. This paper analyzes several numbers of multistorey reinforced concrete building frames of different bay width and length, storey height and number of stories using STAADpro, followed by the construction stage analysis of each model. Also all full frame models are analyzed for earthquake forces in Zone - II (IS 1893 : 2002). Finally, a comparative study of Axial forces, Bending moments, Shear forces and Twisting moments was done at every storey for full frame model (without earthquake forces) and construction stage model (without earthquake forces).
Niche brands in cosmetic and perfumery
A niche brand targets a small, well-defined segment of customers. Niche brands discussed in the document include luxury fragrance brands like Serge Lutens and Frédéric Malle that offer unique, high-quality scents through selective distribution. Niche cosmetics brands focus on natural and organic ingredients to serve specific customer needs, such as Doux Me skincare or Amazonia Viva's botanical products from the Amazon rainforest. Niche status is not defined by sales size alone but by a brand's specialization and ability to meet the needs of its narrow target market.
Overhead Electrification
This document provides an overview of key concepts and components related to Overhead Electrification (OHE) systems used for electric railways. It defines OHE, describes its main components like catenary wire, contact wire and droppers. It also explains concepts like feeding posts, neutral sections, power blocks and supply control posts. Various OHE-related terms are defined such as cantilevers, crossings, electrical clearances, encumbrance and foundations. Different types of foundations are outlined based on soil conditions. Diagrams, drawings and design considerations are also briefly mentioned.
SMART V2G APPPLICATIONS
The document discusses smart vehicle-to-grid (V2G) applications from the EnerWare team's final project report. It notes that V2G technologies allow electric vehicles to provide energy storage and ancillary grid services when not in use. By 2017, it is projected there will be over 5 million plug-in electric vehicles worldwide. The technologies have the potential to provide revenue to vehicle owners and help buildings and power grids balance energy supply and demand. The team's smart V2G applications aim to create this win-win situation through investments in infrastructure, vehicle technology, V2G-ready parking lots, and wireless charging spots.
Hybrid AC/DC microgrid and Electric Vehicles
The presentation discusses power management and control of a hybrid AC/DC microgrid integrated with renewable energy resources and electric vehicles. It provides an introduction to hybrid AC/DC microgrids and discusses challenges related to renewable energy sources and electric vehicles. The presentation outlines the research objectives which include impact analysis of electric vehicle penetration and developing grid-connected and islanding power control algorithms for the microgrid. It also provides a literature review and proposed methodology. Preliminary simulation results of the hybrid AC/DC microgrid are presented.
V2G State of the art technology
This document discusses vehicle-to-grid (V2G) technology which allows electric vehicles to provide power to the electric grid during periods when they are parked and connected to the grid. V2G technology integrates electric vehicles into the smart grid and allows them to provide services like frequency regulation. It describes how V2G works by establishing communication between vehicles and charging stations that can then form a "virtual storage network" to provide balancing services to the electric grid. V2G provides benefits like improving power quality and reducing electric bills but requires standards and legislation to fully integrate electric vehicles into grid operations.
Daylighting Design With Climate
This document discusses using dynamic lighting simulation based on climate data to improve daylighting design compared to the traditional Daylight Factor approach. It introduces new daylighting metrics like Daylight Autonomy that consider illuminance levels over time. Radiance software can perform the dynamic simulations to evaluate designs. As an example, different window shading designs were evaluated for a museum to control light exposure on sensitive exhibits based on the local climate.
Lighting Presentation Rev2
The document discusses various types of light sources and their characteristics. It covers incandescent lamps, fluorescent lamps including compact fluorescent lamps (CFLs), high intensity discharge (HID) lamps including high pressure sodium, low pressure sodium, metal halide and mercury vapor lamps. It also discusses light emitting diodes (LEDs). For each light source, it provides a brief overview of its history, operating principle and common applications. The document is intended to provide fundamental information on different lighting technologies and their uses.
Smart grid
The document provides an introduction to smart grids. It discusses how smart grids enable two-way communication between utilities and customers as well as integration of renewable energy sources. Key components of smart grids include smart meters, phasor measurement units, distributed generation, and information transfers. Smart grids provide benefits like improved efficiency, reliability, and support for renewable energy while also posing challenges around security and complex rate systems. India has several smart grid pilot projects underway to modernize its electrical infrastructure.
Construction process''column,beam,slab''
The document describes the construction process for columns, slabs, and beams in reinforced concrete structures. It discusses the materials used and the typical steps involved, which include:
1) Layout and formwork installation
2) Placement of reinforcing steel based on structural designs
3) Pouring and finishing of concrete
4) Curing of concrete to gain full strength over 28 days
The columns transfer loads vertically through reinforced concrete that is mixed on site or delivered by ready-mix trucks. Slabs and beams are constructed through similar processes of steel reinforcement, formwork, concrete placement and curing.
HVDC vs HVAC ppt
This document discusses transmission lines and HVDC transmission. It defines a transmission line as consisting of two or more parallel conductors used to connect a source to a load. The key parameters of transmission lines are resistance, inductance, capacitance, and conductance per unit length. Transmission lines are used to transfer energy, signals, or power from a transmitter to a receiver. Common types include parallel wires, twisted pair wires, ribbon cables, coaxial cables, and waveguides. HVDC transmission has advantages over HVAC like improved controllability of power flow and ability to transmit power over long distances. HVDC systems convert AC to DC using rectifiers, transmit DC power, and then convert it back to AC using in
BT 1: Concrete Hollow Blocks
The document discusses different types of concrete hollow blocks used in construction. It describes concrete hollow blocks as large rectangular bricks made of cast concrete containing Portland cement and aggregates. The document outlines five main types of concrete hollow blocks: hollow load-bearing blocks, solid load-bearing blocks, hollow non-load bearing blocks, concrete building tiles, and concrete bricks. It also discusses different block arrangements used in masonry structures and defines terms like stretcher, corner, double corner, bull nose, and jamb blocks.
Partition walls
This document discusses partition walls, which divide interior spaces without carrying structural loads. It defines partition walls and lists their advantages such as dividing spaces, providing privacy, and being lightweight. It describes requirements for good partition walls and various types including brick, hollow block, concrete, glass, wood, strawboard, plaster, metal, and asbestos cement. Movable and portable partition walls are also discussed. Common applications include offices, schools, hotels, and event spaces.
Viewers also liked (20)
APPLICATION OF PHEVs FOR SMART GRID IN INDIAN POWER SECTOR1
APPLICATION OF PHEVs FOR SMART GRID IN INDIAN POWER SECTOR1
Construction stage analysis of rcc frames project report
Construction stage analysis of rcc frames project report
Similar to Transportation and Sustainability: EVs and the SmartGrid JohnThornton CleanFuture 090505
Smart charging puts the pedal to the metal on e-mobility
Smart charging represents the intersection where decarbonising power and electrifying transport meet. It creates a crucial building block for a sustainable energy system to power electric cars through solar and wind energy. Encouraging consumers to shift electric vehicle charging to hours when the power system is not under stress generates benefits for the grid, the environment and all electricity customers.
Wireless charging: Qualcomm and Bosch
These slides use concepts from my (Jeff Funk) course on Business Models at National University of Singapore to analyze the business model for a fictitious alliance between Qualcomm and Bosch. Together, these firms can create a dense network of wireless charging stations that can enable the use of inexpensive electric vehicles. The dense network of charging stations reduces the importance of range and thus the weight, volume, and cost of batteries that are needed to propel the vehicle. The slides describe the value proposition, method of value capture, customers, scope of activities, and method of strategic control for Q-Bo, a fictitious alliance between Qualcomm and Bosch.
CALSTART Plug In Sources Of Power
CALSTART Fuels Program Manager, Dr Jasna Tomic, presented on vehicle-to-grid (V2G) technology at Plug-In 2009, Long Beach, CA "Plug-in Vehicles as Sources of Power"
IRJET - OR-DEV System (On Road Dynamic Charging for Electric Vehicles)
This document summarizes a research paper on a proposed wireless charging system for electric vehicles called OR-DEV (On Road Dynamic Charging for Electric vehicles). It introduces an inductive wireless charging lane for EVs with embedded coils that would allow continuous charging of EVs as they drive on the roadway. The system aims to address limitations of traditional electric charging by reducing charging times and not requiring EVs to stop for charging. It presents the background on electric vehicles and motivation for dynamic wireless charging. The system architecture and initial simulation results showing high charging efficiency are summarized. The document also reviews related work on wireless charging systems and discusses how the proposed system could increase EV mileage and reduce waiting times for charging.
International EV Strategies and Programs by Robert Evans
The document discusses current strategies and programs to electrify transportation in the UK and Europe. It outlines 5 areas of focus: 1) Headline electrification aims to raise awareness and incentivize consumer EV purchases. 2) Deep electrification tackles applications that are difficult to electrify through R&D and incentives. 3) Extended electrification utilizes battery improvements to expand opportunities. 4) Automated electrification requires supportive legislation and automated charging. 5) Alternative electrification maintains support for hydrogen fuel cells where they have benefits over batteries. Overall the strategies aim to advance electrification across mobility and energy through partnership working to achieve net zero emissions goals.
Smart grid
A Smart Grid is an electrical grid that uses information and communications technology to gather and act on information, such as information about the behaviors of suppliers and consumers, in an automated fashion to improve the efficiency, reliability, economics, and sustainability of electricity production and distribution. Just as ICs were used to improve the bandwidth of copper cable, they can also be used to improve the bandwidth of electrical cables. These improvements enable a Smart Grid to more effectively purchase and distribute electricity and provide users with real-time prices including time of day prices.
Electrical Vehicle (EV)
1. The document discusses the transition from internal combustion engine vehicles to electric vehicles. It provides details on different types of electric vehicles and compares their efficiencies and emissions to combustion engines.
2. Infrastructure challenges for electric vehicle adoption are addressed, including developing adequate public charging networks and increasing the energy efficiency of batteries. Government policies to incentivize electric vehicle production and consumption are also examined.
3. The automotive industry is shifting from a focus on combustion engines to prioritizing electric, autonomous, connected and shared mobility technologies. Automakers are aiming to increase their electric vehicle portfolios and reduce costs to accelerate this transition.
G.E.T. Smart - Smart Grid: Gridpoint Presentation
GridPoint is a leader in smart energy solutions for utilities, businesses and consumers. It is a smart grid pioneer that provides software to aggregate and manage distributed energy resources like load, storage and generation. GridPoint has over two years of experience with real-world deployments of smart charging for over 300 plug-in vehicles integrated with various levels of charging infrastructure. It works with many leading utility customers to provide smart charging solutions.
Innovation needs for the integration of electric vehicles into the energy system
The mitigation of climate change and the substitution of fossil energy sources is one of the greatest tasks of
our time. Electric mobility is the most promising solution to decarbonize the transport sector. As the market
for electric vehicles is quickly gaining momentum, an urgent need for intelligent integration of the
energy and mobility system arises. This integration leads to a multitude of technical, economic and social
challenges. Thus, this paper aims to identify the need for future research, development, standardization and
regulation to provide recommendations for action.
Presentation by:
Dr. Stefan Wolf and Roman Korzynietz
VDI/VDE Innovation + Technik GmbH
Presented at:
32nd International Electric Vehicle Symposium in Lyon (France)
March 2011 - Michigan Energy Forum - Joseph A. Malcoun II
Have you ever considered purchasing an electric vehicle? Want to find out what all the hype is about? Join us for an evening of information and updates on the rollout of electric vehicles in Michigan and the United States.
Design and development of smart interoperable electric vehicle supply equipme...
The transportation industry at present is moving towards electrification and the number of electric vehicles in the market increased with the different policies of the directorate. Consumers, who wish to contribute to green mobility are concerned about the limited availability of charging points due to high manufacturing costs and the interoperability issues related to smart charging. This work proposes an internet of things-based low-cost, interoperable smart electric vehicle supply equipment for deploying in all charging stations. The device hardware is designed to monitor, analyze, and collect consumed energy by the vehicle and transfer this data to a connected network. The pre-defined messages associated with the firmware will help to record this data with a remote management server for further processing. The messages are defined in JavaScript Object Notation (JSON), which helps to overcome the interoperability issue. The device is smart because it can gather energy usage, detect device faults, and be intimate with the controller for a better operational environment. The associated management servers and mobile applications help to operate the smart device remotely and keep track of the usage statics. The developed low-cost, interoperable smart model is most suitable for two and three-wheeler vehicles.
Electric Vehicles in Smart Grid
The document provides an overview of electric vehicles and their integration into smart grids. Some key points:
- Electric vehicles (EVs) are becoming more prevalent and can provide flexibility to smart grids through technologies like vehicle-to-grid that allow EVs to send power back to the grid.
- Unmanaged EV charging could strain the grid during peak times. Smart charging, where charging is shifted to off-peak periods, helps address this issue.
- The smart grid allows for remote monitoring and management of EV charging stations to optimize charging and provide services to the grid like demand response.
- Widespread EV adoption could both challenge and benefit utilities by requiring grid upgrades but also opening opportunities through customer relationships and
IRJET- Design of O-T-G Charging System for Next-Gen Electric Vehicles
This document describes a proposed on-the-go charging system for electric vehicles that would charge vehicles wirelessly while in motion. It discusses the need for such a system to alleviate issues with limited charging infrastructure and the inconvenience of separate charging times. The system would use magnetic induction to transfer energy from charging pads in the road to receivers on vehicles, allowing drivers to top up their batteries while driving. It provides details on various components that could enable such a dynamic wireless charging system.
Christian Rousseau, Renault - Electrification of vehicles and ITS
The document discusses how intelligent transportation systems (ITS) technologies and services can support electric vehicles (EVs). It provides examples of how real-time traffic information, autonomy assessment, eco-driving advice, guidance to available charging spots, and optimized energy transfer can help EV drivers. The document also calls for standardization, incentives, and collaboration between public and private sectors to develop the necessary infrastructure and regulations to support the growing EV market.
IRJET - Charging Automation for Electric Vehicles
This document describes a proposed system for automated parking and wireless charging of electric vehicles. The system uses infrared sensors to detect empty parking spots and a wireless power transmitter to charge electric vehicles parked in those spots. An Arduino microcontroller monitors the parking status and charging process. It calculates the power consumed and sends that data to an Internet of Things cloud. Users can pay for parking through the system, and a Bluetooth module will then allow their vehicle to be released from the parking spot. The goal of the system is to automate parking and charging processes for electric vehicles to make them more convenient.
E-mobility | Part 4 - EV charging and the next frontier (English)
For the mass adoption of electric vehicle (EV) to become a reality, EV charging infrastructure must be made accessible, quick and reliable. Current signs indicate the sector is moving in the right direction – with China, Europe, US and Japan accelerating their charging infrastructure rollout plans, and notable charging network operators (i.e. ChargePoint, EVgo and Tritium) making billion-dollar exits.
Read more: https://bit.ly/3E8u4SL
EV recharging station solutions - Market possibilities - Circontrol - Circarlife
Circontrol market share and projects with regards to Circarlife product range Electric Vehicle Recharging Station. By Moises Barea
P2P EV Charging Infrastructure
The document discusses the potential for a peer-to-peer (P2P) electric vehicle (EV) charging infrastructure using blockchain technology. It outlines the rising adoption of EVs and need for more charging stations. A P2P model could allow private owners to share surplus energy and charge other EVs directly without third parties. Blockchain would allow for decentralized management, transparency, and energy sharing through smart contracts. The document proposes a technical architecture and implementation using Hyperledger Fabric to build a trusted P2P EV charging network.
Draft Proposal- EV Industry way Ahead for Haryana (1).docx
The key components of an electric vehicle include:
1. Electric motor that powers the wheels.
2. Rechargeable battery pack that provides power to the motor.
3. Power electronics that control electricity flow between the battery and motor.
Similar to Transportation and Sustainability: EVs and the SmartGrid JohnThornton CleanFuture 090505 (20)
Smart charging puts the pedal to the metal on e-mobility
Smart charging puts the pedal to the metal on e-mobility
IRJET - OR-DEV System (On Road Dynamic Charging for Electric Vehicles)
IRJET - OR-DEV System (On Road Dynamic Charging for Electric Vehicles)
International EV Strategies and Programs by Robert Evans
International EV Strategies and Programs by Robert Evans
Innovation needs for the integration of electric vehicles into the energy system
Innovation needs for the integration of electric vehicles into the energy system
March 2011 - Michigan Energy Forum - Joseph A. Malcoun II
March 2011 - Michigan Energy Forum - Joseph A. Malcoun II
Design and development of smart interoperable electric vehicle supply equipme...
Design and development of smart interoperable electric vehicle supply equipme...
IRJET- Design of O-T-G Charging System for Next-Gen Electric Vehicles
IRJET- Design of O-T-G Charging System for Next-Gen Electric Vehicles
Christian Rousseau, Renault - Electrification of vehicles and ITS
Christian Rousseau, Renault - Electrification of vehicles and ITS
E-mobility | Part 4 - EV charging and the next frontier (English)
E-mobility | Part 4 - EV charging and the next frontier (English)
EV recharging station solutions - Market possibilities - Circontrol - Circarlife
EV recharging station solutions - Market possibilities - Circontrol - Circarlife
Draft Proposal- EV Industry way Ahead for Haryana (1).docx
Draft Proposal- EV Industry way Ahead for Haryana (1).docx
More from John Thornton
CHP / Cogeneration As An Alternative Energy Resource
Combined heat and power (CHP), also known as cogeneration, is the concurrent production of electricity and useful thermal energy from a single energy source. It provides higher efficiency than separate generation by capturing heat that would otherwise be wasted. CHP can reduce energy costs for facilities that have thermal loads throughout the year, such as hospitals, universities, and manufacturing plants. Analysis shows the technical potential for CHP in the Pacific Northwest is over 15 gigawatts, which could save money while lowering emissions. CHP may be a good option for facilities interested in reducing energy use and environmental impacts.
Energy and Productivity Workshop for Competitiveness: Energy Intensity_John T...
The document summarizes an energy and operations efficiency workshop for Idaho food processors. It discusses measuring and establishing an energy intensity baseline for the food processing industry. The baseline found the median energy intensity in 2009 was 1,906 BTUs per pound of product. It also describes pilots to provide food processors access to energy data and conduct energy mapping and assessments to identify efficiency opportunities.
Energy Storage and the Smart Grid TiE Oregon Clean Energy Special Interest Gr...
Energy storage is increasingly perceived as a necessary and vital component of any future smart grid, yet meaningful energy storage is still a scarce and missing component.
The discussion on April 21st will focus on:
• Value chain elements of the energy storage industry
• Who are local champions of energy storage
• What are the interests of the investment community
• What does the policy and regulatory framework look like
• How do customers value energy storage
Join our panel to better understand the technologies, trade-offs, market segments and future potential of energy storage.
Energy storage and_the smart_grid-oregon_ti_e_clean_energy_special_interest_g...
The document summarizes a presentation given by John Thornton of CleanFuture on energy storage and the smart grid. It provides an agenda for the presentation which includes discussions on energy storage applications and opportunities in energy storage and smart grid from representatives of Intel Capital, Stoel Rives, and Supercritical Storage. Many US states have adopted renewable portfolio standards to source a certain percentage of energy from renewable sources by specific deadlines. Energy storage can help integrate renewable energy sources into the electric grid by storing intermittent renewable energy for later use. The presentation discusses different energy storage technologies and their applications, as well as the capital costs and locational value of energy storage.
Solutions For Sustainability (a framework) CleanFuture John A Thornton
The document presents John Thornton's framework called "Solutions for Sustainability" which takes a systems approach to achieving sustainability. The framework addresses equity, energy/economy, and environment. It involves convergence of industries like transportation electrification with electric vehicles, urban planning with transit-oriented development, and energy efficiency with renewables. The goal is to create integrated solutions that consider mobility, buildings, energy, and communities in a holistic way.
Example Project: Strategic Project Selection and Accelerated Development by J...
Strategic Project Selection and Accelerated Development - a summary presentation for ACME Corporation product development process improvement project.
EV Roadmap_Oregon-Driving-Patterns_Planning Data_John Thornton Clean Future
The document discusses a breakout group meeting to plan electric vehicle charging infrastructure in the Willamette Valley and Puget Sound corridor. It provides background data on how far and where people in the region drive. The group was assigned to create a hypothetical placement plan for charging stations and discuss regional coordination and policy recommendations. They were tasked with designing an integrated charging network from Eugene to Seattle and considering partnerships with neighboring areas.
Perspectives on the Future of Transportation and Sustainability: The Importa...
The document discusses the benefits of electric vehicles (EVs) and Oregon's role in the emerging EV industry. EVs can help address issues like air quality, land use, population growth and fuel prices. They use electricity as a flexible energy source that can come from renewable resources, reducing emissions over time. Oregon is well positioned in the EV market as an early adopter of advanced transportation technologies. The presentation outlines the benefits of EVs and barriers to widespread adoption that new technologies and infrastructure may help address.
Transforming Supply Chains into Sustainability Circles
Transforming Supply Chains into Sustainability Circles
International Conference on Business and Sustainability: Designing Sustainability
Portland, Oregon USA
October 15-17, 2008
www.bizandsustainability.org
(public version)
More from John Thornton (9)
CHP / Cogeneration As An Alternative Energy Resource
CHP / Cogeneration As An Alternative Energy Resource
Energy and Productivity Workshop for Competitiveness: Energy Intensity_John T...
Energy and Productivity Workshop for Competitiveness: Energy Intensity_John T...
Energy Storage and the Smart Grid TiE Oregon Clean Energy Special Interest Gr...
Energy Storage and the Smart Grid TiE Oregon Clean Energy Special Interest Gr...
Energy storage and_the smart_grid-oregon_ti_e_clean_energy_special_interest_g...
Energy storage and_the smart_grid-oregon_ti_e_clean_energy_special_interest_g...
Solutions For Sustainability (a framework) CleanFuture John A Thornton
Solutions For Sustainability (a framework) CleanFuture John A Thornton
Example Project: Strategic Project Selection and Accelerated Development by J...
Example Project: Strategic Project Selection and Accelerated Development by J...
EV Roadmap_Oregon-Driving-Patterns_Planning Data_John Thornton Clean Future
EV Roadmap_Oregon-Driving-Patterns_Planning Data_John Thornton Clean Future
Perspectives on the Future of Transportation and Sustainability: The Importa...
Perspectives on the Future of Transportation and Sustainability: The Importa...
Transforming Supply Chains into Sustainability Circles
Transforming Supply Chains into Sustainability Circles
Recently uploaded
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Recently uploaded (20)
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Transportation and Sustainability: EVs and the SmartGrid JohnThornton CleanFuture 090505
- 1. Transportation and Sustainability: Electric Vehicles (EVs) and the Smart Grid as Enabling Technologies John A. Thornton [email_address] Clean Energy Special Interest Group Oregon TiE (The Indus Entrepreneurs) Portland, Oregon USA May 5, 2009 Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 3. Affiliations & Disclaimer Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 4. Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 5. Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 6. Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 7. Technology Transformation xEV Transformation Dirty “ Old” technology Inefficient Clean “ New” technology Efficient EV PHEV NEV FCEV etc., etc. Hybrid (HEV) Tiny Explosions inside engine Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 8. Electrification of Transport Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 9. Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 10. Transportation Problems CONFIDENTIAL Oregon TiE - Smart Grid / EV Presentation by John Thornton Air Quality Air Quality Land Use Land Use Population Growth Population Growth Congestion Congestion Fuel Prices Fuel Prices
- 11. CONFIDENTIAL Air Quality Air Quality Land Use Land Use Population Growth Population Growth Congestion Congestion Climate Change Energy Supply Climate Change Energy Supply Transportation Problems Oregon TiE - Smart Grid / EV Presentation by John Thornton X X Fuel Prices Fuel Prices
- 12. EVs as a Sustainability Solution Residential Commercial Electric Power EVs and PHEVs diversify energy supply Electricity is a cleaner “fuel” EVs and PHEVs have lower Wells-to-wheels impact Off-peak capacity Energy can come from renewable sources (RPS) Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 13. EVs as a Sustainability Solution Residential Commercial Electric Power EVs and PHEVs diversify energy supply Electricity is a cleaner “fuel” EVs and PHEVs have lower Wells-to-wheels impact Off-peak capacity Energy can come from renewable sources (RPS) Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 14. Electricity – Growing Greener: Renewable Portfolio Standards (RPS) Source: Pew Center for Global Climate Change (September 2008) http://www.pewclimate.org/what_s_being_done/in_the_states/rps.cfm OR: 25% by 2025 WA: 15% by 2020 CA: 20% by 2010 NV: 20% by 2015 AZ: 15% by 2025 MT: 15% by 2015 Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 15. Renewables and Variability Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 22. Clean Vehicle Supply Chain: Emerging Growth in Oregon 12 9 1 2 Oregon TiE - Smart Grid / EV Presentation by John Thornton
- 23. Clean Vehicle Supply Chain: Emerging Growth in Oregon 12 9 1 2 Oregon TiE - Smart Grid / EV Presentation by John Thornton