Topic 2 methods of purification
•Download as PPTX, PDF•
0 likes•287 views
Chromatography is a technique used to separate mixtures by exploiting differences in how components interact with a stationary and mobile phase. It involves passing a mixture through a chromatography column containing a stationary phase and collecting fractions of separated components in the mobile phase. Chromatography is useful for purifying compounds and analyzing complex mixtures like biological samples.
Report
Share
Report
Share
Recommended
Ch07 separation techniques
The document discusses various separation techniques including filtration, distillation, magnetic attraction, evaporation, and paper chromatography. It explains how each technique uses differences in properties between constituents in a mixture to separate them. Specific examples are given of how these techniques are used to separate substances and obtain pure water from sea water through desalination.
Notes for
The document summarizes the process of preparing tissue samples for histological analysis, including fixation, dehydration, infiltration/embedding, sectioning, staining, and examination. Key steps involve fixing tissues to prevent degradation, dehydrating using increasing alcohol concentrations, infiltrating with paraffin wax or resin for structural support during sectioning, precisely cutting thin sections, mounting them to glass slides, staining, and examining under a microscope. The quality of prepared samples depends on carefully following each step of the preparation process.
Cxc separation processes
The document summarizes various separation processes based on differences in properties of mixture components. It describes six common types of mixtures that can be separated:
1. Solids with different solubility separated via dissolving and filtering.
2. Liquids with different boiling points separated by simple or fractional distillation.
3. Immiscible liquids separated using a separation funnel that exploits differences in density.
4. Solids and liquids separated by filtration which exploits differences in particle size.
5. Substances separated by chromatography which exploits differences in solubility and attraction to an absorbing medium.
6. Solids where one can sublime separated by sublimation which exploits differences in sublimation temperatures.
Separation techniques for ninth grade
The document discusses several methods for separating mixtures, including filtration, chromatography, distillation, and centrifugation. Filtration separates solids from liquids by passing a mixture through a filter. Chromatography separates components of a mixture using a stationary and mobile phase. Distillation boils a liquid mixture and condenses the vapor to separate components based on their boiling points. Centrifugation uses rapid spinning to separate denser materials to the bottom of a centrifuge tube.
Tissue processing
Tissue processors are essential equipment in histology labs that transform tissues into a form suitable for microscopic examination. The key steps in tissue processing involve fixation in formalin to preserve tissue structures, followed by dehydration by passing tissues through increasingly concentrated ethanol solutions, clearing with xylene to replace ethanol, and infiltration with paraffin wax which solidifies inside tissues. Tissue processors can be broadly classified as moving tissue type or moving reagent type depending on whether the tissues or reagents move during processing.
Analysis Of Atrazine Using DLLME and HS-LPME
This document describes experiments analyzing the herbicide atrazine using two green chemistry analytical techniques: dispersed liquid-liquid microextraction and headspace liquid phase microextraction. It outlines the steps for each technique, presents results on extracting atrazine with different solvent combinations, and concludes that 45 μl chlorobenzene and 100 μl methanol were the most effective combination for dispersed liquid-liquid microextraction.
Injectable Drug : Compatibility Information of Doxorubicin HCl
Doxorubicin hydrochloride is an anticancer drug available in lyophilized and liquid forms. It is most stable at a pH between 3-5 and must be protected from light. Reconstituted lyophilized powder or liquid solutions can be stored refrigerated or at room temperature for up to several weeks. Frozen solutions can also be stored for extended periods and thawed without significant loss of potency. Doxorubicin hydrochloride demonstrates pH-dependent stability and is sensitive to light, especially at more dilute concentrations.
Compatibility of DMSO spotting buffers with Nexterion Slide E Epoxy-coated Mi...
Compatibility of DMSO spotting buffers with SCHOTT Nexterion Epoxy-silane coated microarray slides. Effect of using different spotting pins and DMSO concentrations.
Recommended
Ch07 separation techniques
The document discusses various separation techniques including filtration, distillation, magnetic attraction, evaporation, and paper chromatography. It explains how each technique uses differences in properties between constituents in a mixture to separate them. Specific examples are given of how these techniques are used to separate substances and obtain pure water from sea water through desalination.
Notes for
The document summarizes the process of preparing tissue samples for histological analysis, including fixation, dehydration, infiltration/embedding, sectioning, staining, and examination. Key steps involve fixing tissues to prevent degradation, dehydrating using increasing alcohol concentrations, infiltrating with paraffin wax or resin for structural support during sectioning, precisely cutting thin sections, mounting them to glass slides, staining, and examining under a microscope. The quality of prepared samples depends on carefully following each step of the preparation process.
Cxc separation processes
The document summarizes various separation processes based on differences in properties of mixture components. It describes six common types of mixtures that can be separated:
1. Solids with different solubility separated via dissolving and filtering.
2. Liquids with different boiling points separated by simple or fractional distillation.
3. Immiscible liquids separated using a separation funnel that exploits differences in density.
4. Solids and liquids separated by filtration which exploits differences in particle size.
5. Substances separated by chromatography which exploits differences in solubility and attraction to an absorbing medium.
6. Solids where one can sublime separated by sublimation which exploits differences in sublimation temperatures.
Separation techniques for ninth grade
The document discusses several methods for separating mixtures, including filtration, chromatography, distillation, and centrifugation. Filtration separates solids from liquids by passing a mixture through a filter. Chromatography separates components of a mixture using a stationary and mobile phase. Distillation boils a liquid mixture and condenses the vapor to separate components based on their boiling points. Centrifugation uses rapid spinning to separate denser materials to the bottom of a centrifuge tube.
Tissue processing
Tissue processors are essential equipment in histology labs that transform tissues into a form suitable for microscopic examination. The key steps in tissue processing involve fixation in formalin to preserve tissue structures, followed by dehydration by passing tissues through increasingly concentrated ethanol solutions, clearing with xylene to replace ethanol, and infiltration with paraffin wax which solidifies inside tissues. Tissue processors can be broadly classified as moving tissue type or moving reagent type depending on whether the tissues or reagents move during processing.
Analysis Of Atrazine Using DLLME and HS-LPME
This document describes experiments analyzing the herbicide atrazine using two green chemistry analytical techniques: dispersed liquid-liquid microextraction and headspace liquid phase microextraction. It outlines the steps for each technique, presents results on extracting atrazine with different solvent combinations, and concludes that 45 μl chlorobenzene and 100 μl methanol were the most effective combination for dispersed liquid-liquid microextraction.
Injectable Drug : Compatibility Information of Doxorubicin HCl
Doxorubicin hydrochloride is an anticancer drug available in lyophilized and liquid forms. It is most stable at a pH between 3-5 and must be protected from light. Reconstituted lyophilized powder or liquid solutions can be stored refrigerated or at room temperature for up to several weeks. Frozen solutions can also be stored for extended periods and thawed without significant loss of potency. Doxorubicin hydrochloride demonstrates pH-dependent stability and is sensitive to light, especially at more dilute concentrations.
Compatibility of DMSO spotting buffers with Nexterion Slide E Epoxy-coated Mi...
Compatibility of DMSO spotting buffers with SCHOTT Nexterion Epoxy-silane coated microarray slides. Effect of using different spotting pins and DMSO concentrations.
Decalcificaion
This document discusses decalcification, which is the process of removing calcium from bone and other calcified tissues prior to sectioning and microscopic examination. It defines decalcification and lists the criteria for an ideal decalcifying agent. Various factors that affect the rate of decalcification are described, including concentration, temperature, agitation, and suspension of the tissue. The main methods of decalcification are outlined as well as the principles, types, compositions, and procedures for different decalcifying agents such as acids, ion exchange resins, and chelating agents.
Tissue processing(1)
This document discusses the process of tissue processing, which involves preparing tissue samples for microscopic examination through a series of reagents and embedding in a stable medium like paraffin wax. The key stages are fixation, dehydration, clearing, infiltration, and embedding. Factors that influence the quality of tissue processing include the choice of fixative and embedding medium, temperature, properties of processing reagents, tissue characteristics, and thickness. The goal is to minimize tissue damage and distortion during processing.
Sample Disruption Poster
Do you struggle with low yields of RNA? Do you face challenges in efficient disruption and homogenization of starting materials? This sample disruption poster provides an overview of the different disruption and homogenization methods. It provides a guide to choosing the most appropriate method for your starting material and tips for successful disruption and homogenization.
Ipqc solid dosage forms
This document discusses quality control tests for solid dosage forms. It defines in-process quality control (IPQC) and describes various solid dosage forms including tablets, capsules, powders, and lozenges. For each type of dosage form, it outlines the manufacturing process and key IPQC checks to ensure quality. These include tests of physical properties, attributes, defects, specifications, and frequencies of monitoring parameters like weight, hardness, and disintegration during production.
Bacteriology midterms
1. The document discusses the process of tissue processing for light and electron microscopy. This includes fixation, dehydration, clearing, infiltration, embedding, sectioning, staining, and mounting of tissue samples.
2. Key steps in electron microscopy are fixation with glutaraldehyde and osmium tetroxide, embedding in plastic resin, sectioning with an ultramicrotome, and staining with heavy metal stains for high resolution imaging of cell structures.
3. Immunohistochemistry uses antigen-antibody reactions to identify and localize specific molecules in tissue. Primary antibodies attach to antigens and secondary antibodies tagged with markers like HRP or fluorescent dyes are used for visualization.
Tissue processing
This document describes the process of tissue processing for microscopic examination. Tissue samples are first fixed in formalin to prevent decomposition. They are then dehydrated by passing through increasing concentrations of alcohol, cleared using xylene to remove the alcohol, and infiltrated with paraffin wax. The tissues are embedded in wax blocks and sectioned using a microtome. The sections are stained, most commonly with hematoxylin and eosin, which stain nuclei purple and cytoplasm pink. This allows examination under a microscope.
Histotechnique
Histology is the microscopic study of tissues. Key steps in processing tissues for histological examination include fixation, dehydration, clearing, embedding in paraffin wax, sectioning, and staining. Tissues are first fixed in chemicals like formaldehyde to preserve their structure. They are then dehydrated using graded alcohols to remove water. Next, tissues are cleared using solvents like xylene to make them permeable to paraffin prior to embedding. The embedded tissues can then be thinly sectioned and stained for microscopic examination. Proper tissue processing is important for high quality histological analysis.
Asme sec-v-b-se-165-examen-con-liquidos-penetrantes
Norma Asme, que describe todo lo relacionado con la ejecucion y el analisis por liquidos o tintas penetrantes.
Solid matter 1
This document summarizes a student's laboratory experiment to test total solid matter in a water sample. The student measured total solids by drying a water sample and calculating the difference in weight. The total solids in the sample were 33.73 mg/l, which is within the required limit of 500 mg/l for domestic water use according to USPHS standards. Solid analyses are important for controlling water treatment processes and ensuring water quality standards are met.
2006 practical pharmacognosy manual notes
Here are drawings of the different types of trichomes:
Drawings of 1) Unicellular hair
2) Uniseriate multicellular hair
3) Biseriate multicellular hair
B. Glandular hairs:
1- Capitate glandular hairs
2- Peltate glandular hairs
3- Filiform glandular hairs
Drawings of 1) Capitate glandular hair
2) Peltate glandular hair
3) Filiform glandular hair
C. Scales
Drawing of plant scale
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.comResearch Technique Presentation
This document summarizes two liquid microextraction techniques: dispersed liquid-liquid microextraction and headspace liquid phase microextraction. Dispersed liquid-liquid microextraction involves mixing an extraction solvent, dispersive solvent, and water, then separating via centrifugation. Headspace liquid phase microextraction inserts an extraction solvent droplet into the headspace above an aqueous sample, allowing analytes to partition for a set time before analysis. The document was written by Eleanor K. Skelton for a class taught by Dr. Janel Owens on research methods at the University of Colorado Colorado Springs.
Microfiltration
Hahnemühle‘s Albet LabScience brand is a range of products designed for general filtration applications and complex filtration processes in life science and analytical applications in chemical and biological laboratories. The technical specifications of our membranes and syringe filters allow their use in areas where reproducibility and consistency are of major importance.
Quality
Our syringe filters undergo strict quality controls during and after production. The storage life of the finished products in the
warehouse is constantly monitored. Each filter holder undergoes the following five tests: bubble point, burst pressure, membrane absorption, flow rate and extractable substances. The range includes filter holders for the reliable separation of microorganisms and particles in liquids, air and other gases. Clear and sterile filtration, sample production, sterile aeration and medical applications are just some of the areas where disposable filter holders are typically used. They are available in different pore sizes and with different hydrophilic or hydrophobic membrane materials.
Our microfiltration range also includes membrane units. The first step towards successful analysis is choosing the right membrane unit. We offer you different membrane filters with pore sizes from 0.2 μm – 8 μm for particle removal or for the collection of the microorganisms to be examined from solutions. Various cellulose-based membranes and polymer materials cover a wide range of application areas, from clarification and sample preparation to sterile and air filtration to aeration and microbiological control. See our quick and easy to use guidelines on page 8f, which will help you to decide which product is perfect for you.
Soft tissue processing
The tissue processing is designed to remove all extractable water from the tissue , replacing it with a support medium that provide sufficient rigidity to enable sectioning of the tissue without parenchymal damage or distortion
Tissue processing
This presentation includes the complete procedure of tissue processing. All the data and procedures are verified from Bancroft book of histology.
Processing of tissue
This document describes the steps involved in tissue processing from fixation to embedding in wax. It discusses obtaining fresh specimens, fixation in formalin, dehydration through an alcohol series, clearing in xylene, infiltration and embedding in paraffin wax. Sections are then cut on a microtome, mounted on slides and stained, usually with hematoxylin and eosin, to visualize tissue structures microscopically. Proper processing is important to preserve tissue morphology and produce high quality stained sections for diagnostic examination.
Tissue Processing for Histopathological Analysis
This document provides an overview of histological and histopathological tissue processing techniques. It discusses the key steps in processing tissue, including fixation, dehydration, clearing, embedding, sectioning, and staining. Proper tissue processing is important for microscopic analysis and involves techniques to harden tissues without distortion, remove water, and infiltrate paraffin wax to allow thin sectioning. Automated tissue processors can standardize and expedite the multi-step procedure.
Histokinetic by dr narmada
This document discusses the process of histology, which involves preparing tissue samples for microscopic examination. Specimens should be transported in fixatives like formalin or refrigerated. There are several steps involved including fixation, processing, sectioning, staining, and mounting. Tissue processors are used to dehydrate samples through a series of alcohols and xylene before infiltrating and embedding them in paraffin wax for sectioning with a microtome. Sections are then stained using techniques like H&E staining before examination under a microscope. Frozen sectioning and newer techniques using resins and microwaves can also be used to prepare samples for histological analysis.
Separation techniques
This document discusses several methods for separating mixtures, including filtration, distillation, chromatography, centrifugation, and evaporation. Filtration separates solids from liquids by passing a mixture through filter paper. Distillation boils a liquid mixture and condenses the vapor to separate components based on differences in boiling points. Chromatography separates substances based on differences in solubility in solvents. Centrifugation uses rapid spinning to separate mixtures based on density.
Turbidity
This document summarizes a student's lab experiment measuring turbidity in water samples. Turbidity is an indicator of water quality, measuring the cloudiness caused by suspended particles. The student tested tap water and bottled water from a lava company, finding turbidity levels of 2.4 NTU and 0.11 NTU respectively. Both results are within World Health Organization and EPA drinking water guidelines. Potential sources of error in turbidity measurement are discussed. The conclusion is that the water samples are suitable for drinking based on their turbidity levels.
Pz series
This document provides specifications for three air purification devices: PZ-N1, PZ-N2, and PZ-N3. All three devices use photoplasma/photochemistry for purification and generate negative ions through photoionization. They are designed not to exceed 0.04ppm of ozone accumulation and have aluminum alloy housings. The devices differ in their UV output, electrical input requirements, air flow capacity, treatment area size, and dimensions/weight.
Topic 2 syllabus statements
This document outlines experimental techniques from the Cambridge IGCSE Chemistry syllabus. It discusses measuring time, temperature, mass, and volume using appropriate apparatus like burettes, pipettes, and measuring cylinders. It also covers criteria of purity such as using paper chromatography to separate and identify substances, and assessing purity from melting and boiling points. Methods of purification discussed include using solvents, filtration, crystallization, and distillation.
More Related Content
What's hot
Decalcificaion
This document discusses decalcification, which is the process of removing calcium from bone and other calcified tissues prior to sectioning and microscopic examination. It defines decalcification and lists the criteria for an ideal decalcifying agent. Various factors that affect the rate of decalcification are described, including concentration, temperature, agitation, and suspension of the tissue. The main methods of decalcification are outlined as well as the principles, types, compositions, and procedures for different decalcifying agents such as acids, ion exchange resins, and chelating agents.
Tissue processing(1)
This document discusses the process of tissue processing, which involves preparing tissue samples for microscopic examination through a series of reagents and embedding in a stable medium like paraffin wax. The key stages are fixation, dehydration, clearing, infiltration, and embedding. Factors that influence the quality of tissue processing include the choice of fixative and embedding medium, temperature, properties of processing reagents, tissue characteristics, and thickness. The goal is to minimize tissue damage and distortion during processing.
Sample Disruption Poster
Do you struggle with low yields of RNA? Do you face challenges in efficient disruption and homogenization of starting materials? This sample disruption poster provides an overview of the different disruption and homogenization methods. It provides a guide to choosing the most appropriate method for your starting material and tips for successful disruption and homogenization.
Ipqc solid dosage forms
This document discusses quality control tests for solid dosage forms. It defines in-process quality control (IPQC) and describes various solid dosage forms including tablets, capsules, powders, and lozenges. For each type of dosage form, it outlines the manufacturing process and key IPQC checks to ensure quality. These include tests of physical properties, attributes, defects, specifications, and frequencies of monitoring parameters like weight, hardness, and disintegration during production.
Bacteriology midterms
1. The document discusses the process of tissue processing for light and electron microscopy. This includes fixation, dehydration, clearing, infiltration, embedding, sectioning, staining, and mounting of tissue samples.
2. Key steps in electron microscopy are fixation with glutaraldehyde and osmium tetroxide, embedding in plastic resin, sectioning with an ultramicrotome, and staining with heavy metal stains for high resolution imaging of cell structures.
3. Immunohistochemistry uses antigen-antibody reactions to identify and localize specific molecules in tissue. Primary antibodies attach to antigens and secondary antibodies tagged with markers like HRP or fluorescent dyes are used for visualization.
Tissue processing
This document describes the process of tissue processing for microscopic examination. Tissue samples are first fixed in formalin to prevent decomposition. They are then dehydrated by passing through increasing concentrations of alcohol, cleared using xylene to remove the alcohol, and infiltrated with paraffin wax. The tissues are embedded in wax blocks and sectioned using a microtome. The sections are stained, most commonly with hematoxylin and eosin, which stain nuclei purple and cytoplasm pink. This allows examination under a microscope.
Histotechnique
Histology is the microscopic study of tissues. Key steps in processing tissues for histological examination include fixation, dehydration, clearing, embedding in paraffin wax, sectioning, and staining. Tissues are first fixed in chemicals like formaldehyde to preserve their structure. They are then dehydrated using graded alcohols to remove water. Next, tissues are cleared using solvents like xylene to make them permeable to paraffin prior to embedding. The embedded tissues can then be thinly sectioned and stained for microscopic examination. Proper tissue processing is important for high quality histological analysis.
Asme sec-v-b-se-165-examen-con-liquidos-penetrantes
Norma Asme, que describe todo lo relacionado con la ejecucion y el analisis por liquidos o tintas penetrantes.
Solid matter 1
This document summarizes a student's laboratory experiment to test total solid matter in a water sample. The student measured total solids by drying a water sample and calculating the difference in weight. The total solids in the sample were 33.73 mg/l, which is within the required limit of 500 mg/l for domestic water use according to USPHS standards. Solid analyses are important for controlling water treatment processes and ensuring water quality standards are met.
2006 practical pharmacognosy manual notes
Here are drawings of the different types of trichomes:
Drawings of 1) Unicellular hair
2) Uniseriate multicellular hair
3) Biseriate multicellular hair
B. Glandular hairs:
1- Capitate glandular hairs
2- Peltate glandular hairs
3- Filiform glandular hairs
Drawings of 1) Capitate glandular hair
2) Peltate glandular hair
3) Filiform glandular hair
C. Scales
Drawing of plant scale
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.comResearch Technique Presentation
This document summarizes two liquid microextraction techniques: dispersed liquid-liquid microextraction and headspace liquid phase microextraction. Dispersed liquid-liquid microextraction involves mixing an extraction solvent, dispersive solvent, and water, then separating via centrifugation. Headspace liquid phase microextraction inserts an extraction solvent droplet into the headspace above an aqueous sample, allowing analytes to partition for a set time before analysis. The document was written by Eleanor K. Skelton for a class taught by Dr. Janel Owens on research methods at the University of Colorado Colorado Springs.
Microfiltration
Hahnemühle‘s Albet LabScience brand is a range of products designed for general filtration applications and complex filtration processes in life science and analytical applications in chemical and biological laboratories. The technical specifications of our membranes and syringe filters allow their use in areas where reproducibility and consistency are of major importance.
Quality
Our syringe filters undergo strict quality controls during and after production. The storage life of the finished products in the
warehouse is constantly monitored. Each filter holder undergoes the following five tests: bubble point, burst pressure, membrane absorption, flow rate and extractable substances. The range includes filter holders for the reliable separation of microorganisms and particles in liquids, air and other gases. Clear and sterile filtration, sample production, sterile aeration and medical applications are just some of the areas where disposable filter holders are typically used. They are available in different pore sizes and with different hydrophilic or hydrophobic membrane materials.
Our microfiltration range also includes membrane units. The first step towards successful analysis is choosing the right membrane unit. We offer you different membrane filters with pore sizes from 0.2 μm – 8 μm for particle removal or for the collection of the microorganisms to be examined from solutions. Various cellulose-based membranes and polymer materials cover a wide range of application areas, from clarification and sample preparation to sterile and air filtration to aeration and microbiological control. See our quick and easy to use guidelines on page 8f, which will help you to decide which product is perfect for you.
Soft tissue processing
The tissue processing is designed to remove all extractable water from the tissue , replacing it with a support medium that provide sufficient rigidity to enable sectioning of the tissue without parenchymal damage or distortion
Tissue processing
This presentation includes the complete procedure of tissue processing. All the data and procedures are verified from Bancroft book of histology.
Processing of tissue
This document describes the steps involved in tissue processing from fixation to embedding in wax. It discusses obtaining fresh specimens, fixation in formalin, dehydration through an alcohol series, clearing in xylene, infiltration and embedding in paraffin wax. Sections are then cut on a microtome, mounted on slides and stained, usually with hematoxylin and eosin, to visualize tissue structures microscopically. Proper processing is important to preserve tissue morphology and produce high quality stained sections for diagnostic examination.
Tissue Processing for Histopathological Analysis
This document provides an overview of histological and histopathological tissue processing techniques. It discusses the key steps in processing tissue, including fixation, dehydration, clearing, embedding, sectioning, and staining. Proper tissue processing is important for microscopic analysis and involves techniques to harden tissues without distortion, remove water, and infiltrate paraffin wax to allow thin sectioning. Automated tissue processors can standardize and expedite the multi-step procedure.
Histokinetic by dr narmada
This document discusses the process of histology, which involves preparing tissue samples for microscopic examination. Specimens should be transported in fixatives like formalin or refrigerated. There are several steps involved including fixation, processing, sectioning, staining, and mounting. Tissue processors are used to dehydrate samples through a series of alcohols and xylene before infiltrating and embedding them in paraffin wax for sectioning with a microtome. Sections are then stained using techniques like H&E staining before examination under a microscope. Frozen sectioning and newer techniques using resins and microwaves can also be used to prepare samples for histological analysis.
Separation techniques
This document discusses several methods for separating mixtures, including filtration, distillation, chromatography, centrifugation, and evaporation. Filtration separates solids from liquids by passing a mixture through filter paper. Distillation boils a liquid mixture and condenses the vapor to separate components based on differences in boiling points. Chromatography separates substances based on differences in solubility in solvents. Centrifugation uses rapid spinning to separate mixtures based on density.
Turbidity
This document summarizes a student's lab experiment measuring turbidity in water samples. Turbidity is an indicator of water quality, measuring the cloudiness caused by suspended particles. The student tested tap water and bottled water from a lava company, finding turbidity levels of 2.4 NTU and 0.11 NTU respectively. Both results are within World Health Organization and EPA drinking water guidelines. Potential sources of error in turbidity measurement are discussed. The conclusion is that the water samples are suitable for drinking based on their turbidity levels.
What's hot (20)
Asme sec-v-b-se-165-examen-con-liquidos-penetrantes
Asme sec-v-b-se-165-examen-con-liquidos-penetrantes
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...
DECALCIFICATION AND PREPARATION OF GROUND SECTION OF TEETH /certified fixed o...
Viewers also liked
Pz series
This document provides specifications for three air purification devices: PZ-N1, PZ-N2, and PZ-N3. All three devices use photoplasma/photochemistry for purification and generate negative ions through photoionization. They are designed not to exceed 0.04ppm of ozone accumulation and have aluminum alloy housings. The devices differ in their UV output, electrical input requirements, air flow capacity, treatment area size, and dimensions/weight.
Topic 2 syllabus statements
This document outlines experimental techniques from the Cambridge IGCSE Chemistry syllabus. It discusses measuring time, temperature, mass, and volume using appropriate apparatus like burettes, pipettes, and measuring cylinders. It also covers criteria of purity such as using paper chromatography to separate and identify substances, and assessing purity from melting and boiling points. Methods of purification discussed include using solvents, filtration, crystallization, and distillation.
Seperation technique
This PPT is on separation technique for class 9th. This is based on chapter 2 of class 9th science : Is matter around us is pure?
B.Sc Biotech II BAT Unit 4 Chromatography
Chromatography is a technique used to separate mixtures by distributing components between two phases - a stationary phase and a mobile phase. The mixture is dissolved in the mobile phase which carries it through a column containing the stationary phase. Components travel at different speeds depending on how they partition between the phases, allowing separation. Chromatography can be used for analytical purposes to determine the presence and proportions of components, or preparatively to purify components for further use. Key terms include the mobile phase, stationary phase, retention time, and resolution.
Purification Of Substances 1
The document discusses various methods of purifying substances, including filtration, crystallization, and evaporation. It provides details on the principles and procedures of these purification techniques. Filtration is used to separate insoluble solids from liquids or solutions. Crystallization produces pure solids from solutions and is used if the solid decomposes upon strong heating. Evaporation removes the solvent from a solution, leaving behind the pure solid, and is used if the solid does not decompose with heat.
Separation and Purification of organic compounds
The important methods for separation and purification of organic compounds are: Crystallization, Sublimation, Distillation, Differential extraction and chromatography.
Separation Techniques
A pure substance consists of only one substance, while a mixture contains two or more substances not chemically combined. The purity of a substance can be determined by testing its fixed melting and boiling points or using chromatography. Various separation methods exist that separate substances based on differences in their physical properties such as solubility, boiling points, magnetism, and ability to sublime. Common separation methods include filtration, crystallization, distillation, chromatography, and magnetic attraction.
Techniques of separation, Class 9
Class 9 Separation techniques
Evaporation , Sublimation, chromatography, Distillation, Fractional distillation, Crystallization; Are the various methods being talked abut in detail in the ppt along with their applications with the help of activities.
By this We can separate the non-volatile component (solute) from its volatile solvent
Atoms
PowerPoint describing the basic structure of atoms. Geared toward Middle School science and technology classes.
Struture of an atom
This document provides an outline for a presentation on the history and structure of atoms. It begins with the early ideas of Democritus and Thomson, then describes the atomic models of Rutherford, Bohr, and others. The structure of the atom is explained, including the nucleus, protons, neutrons, and electrons. Isotopes and isobars are also introduced. The presentation would provide details on the key scientists and experiments that led to the current understanding of atoms as tiny particles consisting of a nucleus surrounded by electrons.
Structure of atom ppt
Atoms are the basic building blocks of all matter. John Dalton proposed that atoms are indivisible and identical for each element. Rutherford discovered that atoms have a small, dense nucleus at the center surrounded by electrons. Niels Bohr modeled atoms with electrons orbiting the nucleus in fixed energy levels or shells. The nucleus contains protons and neutrons, while electrons orbit outside. The number of protons determines the element, and protons and neutrons together equal the mass number.
Chromatography and its types
Chromatography is a technique used to separate mixtures based on how their components interact with both a mobile and stationary phase. It was first developed in 1900 by Russian scientist Mikhail Tsvet to separate plant pigments. There are several types of chromatography that differ based on the phases used, including paper chromatography, thin layer chromatography, gas chromatography, ion exchange chromatography, gel filtration chromatography, and affinity chromatography. High performance liquid chromatography is a modern technique that uses small particle sizes and high pressure to improve separation efficiency.
Force & Motion
This document is a collection of 12 photo credits from various photographers. It concludes by inviting the reader to create their own presentation using Haiku Deck on SlideShare.
Principles and application of chromatography
Chromatography is a laboratory technique used to separate mixtures by distributing components to separate between two phases, one stationary and one mobile. It works based on how substances partition between the phases and move through the system at different rates. Common techniques include column chromatography, thin layer chromatography, gas chromatography, and high performance liquid chromatography. Chromatography is used in analytical chemistry to identify unknown substances and quantify components in a mixture.
Seperation and purification techniques
This document discusses various techniques for purifying solid and liquid organic compounds. The common methods for purifying solids include crystallization, recrystallization, sublimation, and use of drying agents. Liquid organic compounds can be purified through distillation techniques like simple distillation, fractional distillation, and vacuum distillation. Other techniques mentioned are extraction, chromatography, and checking criteria like melting point and boiling point to confirm purity.
Paper Chromatography PPT (new)
Paper chromatography is a technique introduced in 1865 that separates mixtures by analyzing how compounds partition between a stationary phase (cellulose paper) and a mobile phase (solvent). It is simple and widely used. Compounds are separated based on how they partition between the water in cellulose fibers and an organic solvent. Samples are applied to a line on paper and developed in a chamber saturated with solvent vapors. Compounds form separate spots visualized with detectors like iodine or UV light. Quantification is done by comparing spot intensities to a standard.
Viewers also liked (16)
Recently uploaded
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Particle-In-Cell (PIC) algorithm,
Plasma expansion in the dipole magnetic field.
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business MeetingThe binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
Recently uploaded (20)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
3D Hybrid PIC simulation of the plasma expansion (ISSS-14)
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Topic 2 methods of purification
- 1. METHODS OF PURIFICATION and LABORATORY EQUIPMENT
- 7. This is the simplest and quickest method out of all of them. Decanting is used to separate an insoluble solid from a liquid.