The document provides an overview of the tendering, bid evaluation, and award process. It discusses key steps like issuing a notice inviting tenders, bid submission and opening, evaluation of technical, commercial, and financial capabilities of bidders, potential post-bid meetings, developing an evaluation report, and awarding the contract to the best bidder. The goal is to select the most suitable supplier through a fair and transparent competitive bidding process.

1. Tendering, Bid Evaluation &
Award Process
Knowledge sharing by : Prateek Kashyap
(With co-participation of Vipul Singhal)

2. We need to implement; BUT HOW????,
That’s a Project !!!!!

3. What is a Project?
Projects is a temporary rather than permanent social systems or work
systems that are constituted by teams within or across organizations to
accomplish particular tasks under time constraints.
OR
A Project is a temporary endeavor undertaken to accomplish a unique product
or service
OR
In simple words it’s a collection of activities which needs to be performed in
certain defined constraints by a team to realize the need.

4. Attributes of a Project
 Unique purpose
 Temporary
 Requires resources
 Should have a primary sponsor and/or customer
 Involve uncertainty

5. Steps in a Project
 Step 1 : Realization of need
 Step 2 : Planning for its fulfillment
 Step 3 : Decision to produce or Procure
 Step 4 : Procurement
 Step 5 : Execution / Commissioning
 Step 6 : Verify fulfillment of parameters
 Step 7 : Handover for Operations

6. Who are the Stakeholders of Project?
Stakeholders are people or entities who have a say in implementation of the
project and they get affected w.r.t. Project’s success or failure.
They are :
 Employer - Those who are implementing
 Contractor - Those who are to supply, construct/ erect &
commission the project equipment or provide
respective services
 Consultant - or Engineers who specify, quantify, select and
supervise the supply, construction/erection,
commissioning & Handover of Project for Operations
 Financial Institute - Those who are lending money for project

7. What is Procurement ?
Procurement is the acquisition of goods, services or works from an outside
external source. It is favorable that the goods, services or works are
appropriate and that they are procured at the best possible cost to meet the
needs of the purchaser in terms of quality and quantity, time, and location.
What is the Requirement ?
 May be for Equipment / Machinery
 May be for Technology / Consultancy
 May be for Execution / Services / or for Safety / Quality

8. What are the Methods for Procurement ?
• Agreement
• Purchase order
• Rate contract
• Auction
• Tender
• Acquisition

9. What is a Tender ?
A written invitation sent to potential suppliers of a good or service to inform
them about the information required for the buyer to choose among them.
Its Objective
• To Ensure Best Fit Supplier is selected to Supply Goods/ Services to
customer which offers best value of money
• Selection process should be business ethics driven- Fair Practice
• More options
• Equal opportunity

10. Routes to be followed for Tendering
Depends primarily on the Statutory Norms or the Financial Institutes .
• ICB : International Competitive Bidding
• LICB : Limited International Competitive Bidding
• NCB : National Competitive Bidding

11. The Tendering Process
Step 1 : NIT – Notice Inviting Tender (Advertisement, Post , Email.. )
Step 2 : EOI- Expression of Interest by respective Bidders
Step 3 : Tender document Floating/ Selling
Step 4 : Pre Bid Meeting
Step 5 : Bid Submission- In Single Phase or Two Phases
Step 6 : Bid Opening – In Single Phase or Two Phases
Step 7 : Bid Evaluation
Step 8 : Post Bid Meeting
Step 9 : Report Formation
Step 10 : Award of Contract

12. Contents of NIT (Notice Inviting Tender)
• Brief Project Particulars
• Brief Requirement of Tender
• Eligibility Criteria – Technical & Financial
• Duration & Place of sale of tender document
• Price of tender document
• Contact Information
• Probable amount of Contract (Primarily in Govt. Tenders)
• Earnest Money amount
• Work completion period
• Bid submission period
Sample
NIT- Pvt.
NIT-Govt.

13. Advertising the NIT
Depending on the the need of the Route of tendering, the NIT needs
to be advertised or circulated through & to :
• All Embassies ( ICB/ LICB route to be followed)
• Major newspapers (ICB/ LICB/ NCB route to be followed)
• Web portals (ICB/ LICB/ NCB route to be followed)
The NIT may be brief from publishing point of view as an advertisement.
The detailed NIT in this case is given upon receiving EOI (Expression of
Interest) from the prospective Bidder

14. EOI - Expression of interest
Interested Bidders shall show their Interest in executing the
Tender/ submitting the Bid and ask for the Complete Tender
documents
Followed by purchase of the tender documents

15. Tendering type based on mode of submission
Manual tendering- Paper type submission
E Tendering- E-submission (E Bidding)

16. Contents of Tender Document
Section I : NIT/ IFB (Invitation For Bids)
Section II : ITB (Instruction To Bidders)
Section III : GCC (General Conditions of Contract)
Section IV : SCC (Special Conditions of Contract)
Section V : SOR (Schedule of Requirement)
Section VI : Technical Specification
Section VII : Various Bid Forms

17. Constituents of Bid Forms in Tender document
• Bid Security Form,
• Contract Form,
• Performance Security Form,
• Financial Capability Form,
• Technical Capability Form,
• Manufacturer Authorization Form,
• Advance bank Guarantee Form,
• Completion certificate Form,
• Deviation Statement Form,
• Places of Tests & Inspection Form….

18. The Pre Bid Meeting
Subsequent to the purchase of Tender Document, the prospective
Bidders, Employer and Consultants meet for discussions with following
objectives :
• Provide clarification to the Bidders- Technical or Commercial
• Communicate any additional information in Project
• Do necessary revision in the tender documents as per industry
feedback
• Ensure minimum deviations
• Critical points to explained and discussed
The Minutes of Pre Bid Meeting are recorded and it may be followed by an
Amendment or Addendum to the Tender documents

19. The Bid Submission/ Tender Submission
Subsequent to the Pre Bid Meeting, the Bids are prepared and submitted in
the prescribed time and form, duly sealed.
The Bid submission could be of following forms
Two Stage Bidding : First Techno commercial part & then Price part
Single stage Bidding : Comprehensive Bid is submitted

20. The Bid Submission/ Tender Submission

21. The Bid Opening / Tender Opening
Tender Board ( consisting of representative of Employer -Chairman/
Board Member/ CEO/ CE; Consultant, Financial Institute) meets on the
nominated day and time to open these Sealed bids ( Generally few
hours after last time of Bid submission date). Late Bids are not
supposed to be entertained. Usually Following steps are followed:
Step 1 : Introduction of the Participants and announcement of the
Bidders. Followed by Attendance marking.
Step 2 : Declaration of Sufficiency of the Bid Bond
Step 3 : Declaration of Guaranteed Technical Particulars
Step 4 : Declaration of the Bid Price if it’s a Single Stage Bid

22. The Bid Opening / Tender Opening

23. The Bid Evaluation
Generally the bid evaluation process involves a team of experts or panels
which is lead at the front by a single person who is responsible for
interdepartmental/interdisciplinary coordination as well as coordination with the
stake holders to and Bidders . He may be known as Project Coordinator or
Project Manager. His objectives are:
• The Bid is thoroughly evaluated by the respective Technical, Legal,
Commercial &Financial experts
• Proper flow of communication to & from bidders (queries & replies)
• All aspects of bids are evaluated
• Every Bidder gets a fair chance of winning the contract

24. The Bid Evaluation
The Evaluation of the bid has following parts:
• Technical Evaluation
• Commercial Evaluation
• Capacity Evaluation

25. The Bid Evaluation- Technical
• The equipment /system & manufacturer being offered by the bidder is to be
evaluated for its conformance with the tender technical specification
• The Guaranteed Technical particulars are to meet the minimum Tender
requirement.
• Any alternative technology or material grade offered by the bidder needs to
be verified.
• Any price implication on the project w.r.t. technical parameters to be verified
and respective loading on the price to be proposed.
• The feedback of working of the equipment supplied by the bidders in other
projects to be evaluated
• The factory load of the bidder or its major supplier should be evaluated

26. The Bid Evaluation- Technical (-Score method)

27. The Bid Evaluation- (-Weighted Score method)

28. The Bid Evaluation- Commercial
• The Bid Forms are duly filled and signed
• The declared Deviations on the Commercial part are to be evaluated
• All costs are properly covered in the offered prices
• Bid price is in specified currency or the listed conversion rate at the time of
price bid opening are to be considered.
• Any price variation/escalation formulae are correct and is justified
• Details of any extra costs ( such as Delivery cost , shipping cost, custom
charges, insurance, documentation , testing & inspection) are identified
• Cost of Spares if mentioned extra is identified
• Any other indirect commercial deviations are identified

29. The Bid Evaluation- Capacity
• The Bidder has sound financial condition
• The Bidder has sufficient funds to procure raw material and process so that
positive cash flow is maintained up to delivery of equipment
• The Bidder is not under litigation or any act resulting in bank corruptly
• The Bidder’s financial has sufficient immunity from market economy trend
• Will there be any cost resulting from loss of economy of scale
• If offer is for Services , then check should be done if resultant staff savings or
reduction in support services fully accounted for
• Has the cost of any long term agreement been included ?
• In case of Foreign Bidder, geo-Political scenario to be evaluated.

30. Post Bid Meeting
• During Bid Evaluation , Bid Evaluation committee witness that submitted Bid
has several variation with the Technical Specification of the Tender.
• It is therefore difficult for the Committee to Compare the Bids .
• A Post Bid Meeting is organized with separate Bidders individually to bring
them to a common Platform and negotiate on the Technical Specs wherever
appropriate
• Once the Technical part is freezed out , Bidders are asked to again submit
their Commercial Bid ( after taking into consideration the cost of technical
changes) .

31. Post Bid Meeting

32. Evaluation Report
• Before Release of Order/ award of contract , an evaluation report is being
generated for the purpose of Office records or for future reference.
• This report contains basic details such as
 Description of Contract
 Type of Tender
 Closing date of Tender
 Details of Tender Received
 Technical Compliance of tenders
 Analysis of Lowest 3 tenders
 Performance records of Lowest 3 tenders
 Recommendation of Assessment Panel
Sample
Evaluation Simple format
Evaluation- Technical
Evaluation Commercial

33. Award Process
• Based on Evaluation report & recommendation of Assessment Panel a “ Best Fit Bidder”
or successful is declared.
• A Letter of Award is Issued to the Successful Bidder.
• The Bidder is asked to submit a Contract Performance Guarantee which could be in
form of a Bank Guarantee, Demand Draft, Cash or a Fixed Deposit Receipt
• A contract between Bidder & Employer is drafted as per International Contract Laws.
• Contractual Obligations & Rights are being drafted / incorporated in the contract
• Technical Obligations are clearly stated
• Quality Obligations are clearly stated
• Completion Schedule is clearly stated
• Payment schedules are clearly stated
• The contract is signed and moved for implementation

34. Contract document’s Broad features
• Work of tender/contract is mentioned
• Date of signing is mentioned
• Parties are mentioned
• Scope of the contractor is mentioned
• Contract price is mentioned
• Documents of reference and their order of precedence is mentioned
• Time schedule is mentioned
• Payment terms is mentioned
• Other conditions of contract- technical & commercial are referred.
• Duly signed/stamped by the authorized representatives in presence of witness
Sample Contract 1 & 2

36. Thanks