The document provides an overview of nanoscience and nanotechnology. It begins with definitions of key terms like nanometer and discusses how materials behave differently at the nanoscale. Various nanoscale materials and applications are described such as carbon nanotubes, buckyballs, and their uses in areas like energy, medicine, and consumer goods. Imaging techniques used in nanoscience like scanning probe microscopes are also outlined. The document aims to introduce readers to the wide-ranging field of nanotechnology.
Alfa Chemistry offers a wide variety of nanomaterials, especially nanopowder and nanoparticle. Learn more at https://www.alfa-chemistry.com/products/nanomaterials-14.htm
WHO SHOULD ATTEND?
This course will cover the topic of nanomaterials focusing on how defining the classes of nanomaterials based on their dimensionality and properties, methods of formation of nanomaterials and common characterization methods to investigate the nanomaterials formed. It is designed for those who are active or intended to be active in this field which includes Researchers, Scientists and Engineers. As the field of nanomaterials is developing very rapidly, the course provides an ideal opportunity to review the scope and applicability of the currently available and emerging nanomaterials in various engineering industries.
INTRODUCTION
This module starts by defining nanotechnology and surveying on the status of the technology at the moment. Then, it focuses on the most important fundamental component that enables nanotechnology: nanomaterials. Indeed, nanomaterials are very important thus have been developed as a consequence of truly significant recent advances within the materials science community. This module integrates knowledge of this development; from most of the possible techniques to produce or synthesis nanomaterials of various dimensions: 0, 1, 2 and 3 dimensions i.e. nanoparticles, nanotubes / nanorods, nanocoating / nanofilm and nanoporous materials, mode of characterisations of the nanomaterials formed and also on the applications of nanomaterials in various fields. At the end of the module, topic on nanotoxicology and safety issues are introduced and discussed.
This module is designed for those who are active or intended to be active in this field and has a main aim as to simulate interest in this important field.
COURSE OBJECTIVES
i. To introduce and discuss on the topic of nanotechnology and nanomaterials.
ii. To establish understanding on common methods for the production of nanomaterials and on the characterisation techniques.
iii. To address the importance of expanding research and innovation in nanoscale science and engineering.
Alfa Chemistry offers a wide variety of nanomaterials, especially nanopowder and nanoparticle. Learn more at https://www.alfa-chemistry.com/products/nanomaterials-14.htm
WHO SHOULD ATTEND?
This course will cover the topic of nanomaterials focusing on how defining the classes of nanomaterials based on their dimensionality and properties, methods of formation of nanomaterials and common characterization methods to investigate the nanomaterials formed. It is designed for those who are active or intended to be active in this field which includes Researchers, Scientists and Engineers. As the field of nanomaterials is developing very rapidly, the course provides an ideal opportunity to review the scope and applicability of the currently available and emerging nanomaterials in various engineering industries.
INTRODUCTION
This module starts by defining nanotechnology and surveying on the status of the technology at the moment. Then, it focuses on the most important fundamental component that enables nanotechnology: nanomaterials. Indeed, nanomaterials are very important thus have been developed as a consequence of truly significant recent advances within the materials science community. This module integrates knowledge of this development; from most of the possible techniques to produce or synthesis nanomaterials of various dimensions: 0, 1, 2 and 3 dimensions i.e. nanoparticles, nanotubes / nanorods, nanocoating / nanofilm and nanoporous materials, mode of characterisations of the nanomaterials formed and also on the applications of nanomaterials in various fields. At the end of the module, topic on nanotoxicology and safety issues are introduced and discussed.
This module is designed for those who are active or intended to be active in this field and has a main aim as to simulate interest in this important field.
COURSE OBJECTIVES
i. To introduce and discuss on the topic of nanotechnology and nanomaterials.
ii. To establish understanding on common methods for the production of nanomaterials and on the characterisation techniques.
iii. To address the importance of expanding research and innovation in nanoscale science and engineering.
This article mainly introduces the application of nanomaterials. Visit https://www.alfa-chemistry.com/products/nanomaterials-14.htm for more information.
History of nanoscience, Nanomaterial Dimensions, why small is good, surface area to volume ratio, top down and bottom up technique and physical and chemical synthesis technique and future application.
the branch of technology that deals with dimensions and tolerances of less than 100 nanometres, especially the manipulation of individual atoms and molecules.
This article mainly introduces the application of nanomaterials. Visit https://www.alfa-chemistry.com/products/nanomaterials-14.htm for more information.
History of nanoscience, Nanomaterial Dimensions, why small is good, surface area to volume ratio, top down and bottom up technique and physical and chemical synthesis technique and future application.
the branch of technology that deals with dimensions and tolerances of less than 100 nanometres, especially the manipulation of individual atoms and molecules.
In their ongoing quest to improve existing products by creating smaller components and better performance materials, all
at a lower cost, the number of companies that will manufacture"Nano products" (by this definition) will grow very fast and Soon make up the majority of all companies across many industries. Evolutionary nanotechnology should therefore be
viewed as a process that gradually will affect most companies and Industries.
Nanotechnology is defined as the study and use of structures between 1 nanometer and 100 nanometers in size. To give you an idea of how small that is, it would take eight hundred 100 nanometer particles side by side to match the width of a human hair
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
17. 17
27
Al makes up 100% of naturally occurring Al
Atomic mass : 26.9815 amu
13protons
14neutrons
13protons
18. 18
1. How many atoms in your piece of Aluminum?
2. How big is an Aluminum Atom?
3. How many atoms on the surface of the piece?
4. What is the ratio of surface atoms to volume
atoms?
5. If your piece was 10nm*10nm*10nm what
would the ratio be?
6. If your piece was a sphere of 2nm radius what
would the ratio be?
Nanoscalc A
19. 19
Nanocalc B
Lets say you have a cube of solid material 1 m on a side.
A.What is the total surface area?
B.If you split it into cubes 0.5 m on a side, what is the total
surface area of all the pieces?
C.If you split into cubes 1 mm (10-3
m) on a side, what is the
total surface area?
D.If you split into cubes 1 micron on a side (10-6
m) what is the
total surface area?
E.If you split into cubes 1 nanometer (10-9
m) what is the total
surface area?
(for each answer, try to come up with an intuitive way of
describing the area : tennis courts, football fields etc.)
20. 20
• The nanoscale is more interesting than the atomic scale
because the nanoscale is the first point where we can
assemble something -- it's not until we start putting
atoms together that we can make anything useful.
(Nobel Prize winner Dr. Horst
Störmer)
21. 21
• At the nano level materials begin to demonstrate
entirely new chemical and physical
properties.
.
• Materials can be stronger, lighter and highly
soluble , reducing of melting point ……
• By manipulating the arrangement of atoms nanotechnology may be able
to create many new materials and devices .
23. 23
Van der Waals forceVan der Waals force
• An attractive force between atoms or molecules.
• Not the result of chemical bond formation, much weaker
• Responsible for some material properties: crystal structure,
melting points, boiling points, surface tension, and densities.
Ref):http://www.lclark.edu/~autumn/climbing/climb.html
27. 27
The next “Big Thing” is very, very, very small!
“Nanotechnology is an enabling
technology that will change the
nature of almost every human-
made object in the next century.”
This means… anything manufactured in Oklahoma will be
impacted by nanotechnology and it is happening more
quickly than most people might think!
28. 28
WHAT IS NANOTECHNOLOGY?
* 1 millimeter = 1,000 micrometers;
1 micrometer = 1,000 nanometers
Source: "Nanotech: The Tiny Revolution" by CMP Científica
(November 2001)
Structures
(e.g.materials)
Devices
(e.g. sensors)
Systems
(e.g. NEMS)
Nanotechnology is the
manipulation of matter at the
nanometer* scale to create novel
structures, devices and systems.
29. 29
Nanotechnology …
• is already making today’s products:
– Lighter
– Stronger
– Faster
– Smaller
– More Durable
32. Top-down approaches
These seek to create smaller
devices by using larger ones to
direct their assembly.
Many technologies descended from
conventional solid-state silicon methods for
fabricating microprocessors are now capable of
creating features smaller than 100 nm, falling under
the definition of nanotechnology.
100
Photolithography.
35. Nanotechnology Applications
Information Technology Energy
Medicine Consumer Goods
• Smaller, faster, more
energy efficient and
powerful computing
and other IT-based
systems
• More efficient and cost
effective technologies for
energy production
− Solar cells
− Fuel cells
− Batteries
− Bio fuels
• Foods and beverages
−Advanced packaging materials,
sensors, and lab-on-chips for
food quality testing
• Appliances and textiles
−Stain proof, water proof and
wrinkle free textiles
• Household and cosmetics
− Self-cleaning and scratch free
products, paints, and better
cosmetics
• Cancer treatment
• Bone treatment
• Drug delivery
• Appetite control
• Drug development
• Medical tools
• Diagnostic tests
• Imaging
57. Welcome toWelcome to
NanoWorldNanoWorld!!
Figure 1.26: Robot image.
Summary
Nanotechnology is ubiquitous and pervasive. It is an emerging
field in all areas of science, engineering and technology.
66. Graphein: (Greek) to write
Graphite
Diamond
Nanotube
Buckyball
The Forms of Carbon
67. Nanotubes have chiralityNanotubes have chirality
Carbon Nanotubes:
Cylinders of Sheet Lattices
Multiwall CNT=Nested tubesMultiwall CNT=Nested tubes
68. What’s the big deal about
carbon nanotubes???
• Amazing Mechanical Properties
• Amazing Electrical Properties:
– Can be conductors or semiconductors
– Could be the building block of nanocomputing
69. What are atoms ?
How big are they?
How well can we “see” them?
• Atoms are roughly 2-5 Angstroms in dimensio
2-5 * 10 -10
m
Take a millimeter and divide it into 1000 parts:
micron 10-6
m
Take one micron and divide it into 1000 parts:
nanometer 10-9
m
Take one nanometer and divide in 10 parts:
angstrom 10-10
m
~1Ǻ
72. What are atoms ?
How big are they?
How well can we “see” them?
• Atoms are roughly 2-5 Angstroms in dimensio
2-5 * 10 -10
m
Take a millimeter and divide it into 1000 parts:
micron 10-6
m
Take one micron and divide it into 1000 parts:
nanometer 10-9
m
Take one nanometer and divide in 10 parts:
angstrom 10-10
m
~1Ǻ
78. What has enabled Nanoscie?
•Advances in Computing Power
•New Generation of Scientific Instruments
Scanning Probe Microscopes
An incomplete list. . . .
Very Sharp Tip scans over
sample surface
Scanning Tunneling Mic. (STM(
Atomic Force Mic. (AFM(
Magnetic Force Mic. (MFM(
Near Field Scanning Optical Mic. (NSOM(
ATOMIC RESOLUTION
Why Nano now?
79. Scanning Probe Mic: Sharp tip
Scanning
Probe Tip
Sample
Sample
Sharp tip
moves over
surface and
measures
some property
الهدف:
الهدف من هذه الوحدة هو تقديم مجال تكنولوجيا النانو الناشئة المبتدئين من تكنولوجيا النانو بما في ذلك سبيل المثال لا الحصر، والطلاب والمعلمين وأعضاء المجتمع والأعمال والعمال وممثلي الحكومة.
Scale of Things—Nanometers:
Hence, nanotechnology refers to the process, act or ability to work with materials or matter at the scale of 1 to 100 nanometers. The ability of working at this scale renders novel benefits to numerous products and applications such as those found in the semiconductor manufacturing, material science, medicine, etc.
However, what is the size of 1 nanometer? Albert Einstein estimated that the size of 1 sugar molecule was equal to 1 nanometer. One nanometer would also be equal to the linear size of 10 hydrogen atoms stacked side by side (Roueckes, et al., 2002). It is the same as one-billionth of a meter – a single bacterium is a few hundred nanometers in diameter and a DNA strand is approximately 2-12 nanometers across (NNI, 2007). The un-aided human eye can see down to about 10,000 nanometers (Ratner & Ratner, 2003).
A popular diagram found at www.nano.gov shows size comparisons of natural and manmade things relative to the nanometer.
Fig. 1.5 - http://www.nano.gov/html/facts/The_scale_of_things.html.
نفترض أن لدينا مكعب طول أضلاعة 1 سنتيميترفإن حجم هذا المكعب = 1 سنتيميتر مكعبوحيث أن للمكعب 6 أوجة فإن مساحة السطح لهذا المكعب = مساحة السطح الأول+مسحة السطح الثانى +....الخ وحيث أن مساحة السطح الواحد = طول الضلع مضروبا فى نفسة(طول الضلع تربيع)= ا سم مربعفإن المساحة الكلية لأسطح المكعب = 6 سنتيميتر مربعماذا لو قمنا بشطر هذا المكعب إلى شطرين متساوييينسيصبح مجموع أحجام الجزئين متساويا مع حجم المكعب الرئيسىولكن ماذا عن مجموع مساحة الأسطح للجزئين الناتجين عن شطر المكعب الأساسى هل سيتساوى مع مساحة المكعب الرئيسى؟مساحة السطح العلوى والسفلى =1+1= 2 سم مربعكل وجة من الأوجة الأربعة = 0.5 سم مربع فيكون المجمع للأربعة أوجة= 2 سم مربعتصبح مساحة أسطح كل جزء 4 سم مربع وبما أن لدينا جزئين قد نتجا عن شطر المكعب الأساسى فيصبح مجموع مساحة سطحي الجزئين الذى نتجا هو 8 سم مربع فى حين كانت مساحة سطح المكعب الأساسى =6 سم مربعإذن مساحة السطح زادت بتقسيم المكعب إلى أجزاءمن الواضح أننا لو قمنا بتقطيع هذا المكعب إلى عدد أكبر فإنة ستزيد مساحة الأسطح الناتجة عن عملية التقسيموكلما زاد عدد القطع كلما زادت مساحة الأسطحيمكننا أن نتخيل تقسيم هذا المكعب إلى مليون جزء فإنة ستكون المساحة الناتجة شاسعة جدا
مقدمة:
تكنولوجيا النانو هو بوابة المستقبل للبشر على الأرض؟
هل ستؤدي التقنيات والعلوم التي يتم تطويرها مع تكنولوجيا النانو لإحداث إختراقات هائلة مثل تحسين جودة الحياة، والحصول على طعام وماء نوعيين للجميع، والقضاء على معظم الأمراض المنهكة (debilitating)، أو الحصول إلى مصادر طاقة وفيرة متحررة من الاعتماد على النفط والغاز أو غيرها من أنواع الوقود الأحفوري؟
وهل سيتمكن الجميع من الحصول على وفرة من المعلومات عبر أجهزة الكمبيوتر قوية للغاية؟ هل سيكون هناك مزيد من الذكاء الاصطناعي؟ هل ستتمكن المصانع من انتاج وتصنيع المنتجات اعتادا فقط على عمل الروبوتات والحواسيب؟ سوف نكون قادرين على ايصال التجهيزات الأرضية الأخرى مثل المحطات الفضائية الىوالقمر أو ما هو أبعد من ذلك؟ الكثيرين يعتقدون ذلك.
مقدمة:
تكنولوجيا النانو هو بوابة المستقبل للبشر على الأرض؟
هل ستؤدي التقنيات والعلوم التي يتم تطويرها مع تكنولوجيا النانو لإحداث إختراقات هائلة مثل تحسين جودة الحياة، والحصول على طعام وماء نوعيين للجميع، والقضاء على معظم الأمراض المنهكة (debilitating)، أو الحصول إلى مصادر طاقة وفيرة متحررة من الاعتماد على النفط والغاز أو غيرها من أنواع الوقود الأحفوري؟
وهل سيتمكن الجميع من الحصول على وفرة من المعلومات عبر أجهزة الكمبيوتر قوية للغاية؟ هل سيكون هناك مزيد من الذكاء الاصطناعي؟ هل ستتمكن المصانع من انتاج وتصنيع المنتجات اعتادا فقط على عمل الروبوتات والحواسيب؟ سوف نكون قادرين على ايصال التجهيزات الأرضية الأخرى مثل المحطات الفضائية الىوالقمر أو ما هو أبعد من ذلك؟ الكثيرين يعتقدون ذلك.
تعريف:
معظم الجامعات والمراكز البحثية فضلا عن الكيانات الخاصة والحكومية التي تستخدم او تتعامل مع تقنية النانو توفر التعريف المماثل والواضح الخاصة بها لتقنية النانو، لذا، فإن الدرس الأول حول تقنية النانو هو أن نفهم أنه هو حقل واسع متعدد التخصصات يشمل جميع فروع العلوم والهندسة والتكنولوجيا، وكذلك، إدارة الأعمال، والمالية، والاقتصاد، والعلوم الاجتماعية والطبية والعديد من التخصصات الأخرى.
ويرد التعريف العام للتكنولوجيا النانو في موقع المبادرة الوطنية لتقنية النانو (NNI) وهو موقع حكومي امريكي (http://www.nano.gov). تم إنشاء وكالة NNI لتعزيز التقدم والريادة عالميا في مجال تقنية النانو داخل الولايات المتحدة. تعريف NNI لتقنية النانو هو:
"تقنية النانو هي فهم والسيطرة على المادة في أبعاد ما يقرب من 1 الى 100 نانومتر، حيث توجد ظواهر فريدة (unique phenomena ) تمكن تطبيقات جديدة غير مألوفة (novel applications) “.
« بانتقالنا الى العلوم والهندسة والتقنية النانوية الابعاد (nanoscale)، فإن تقنية النانو تتضمن التصوير (imaging)، والقياس (measuring)، والنمذجة (modeling)، والتعامل(manipulating) بالمادة على هذه الابعاد"
تعريف:
معظم الجامعات والمراكز البحثية فضلا عن الكيانات الخاصة والحكومية التي تستخدم او تتعامل مع تقنية النانو توفر التعريف المماثل والواضح الخاصة بها لتقنية النانو، لذا، فإن الدرس الأول حول تقنية النانو هو أن نفهم أنه هو حقل واسع متعدد التخصصات يشمل جميع فروع العلوم والهندسة والتكنولوجيا، وكذلك، إدارة الأعمال، والمالية، والاقتصاد، والعلوم الاجتماعية والطبية والعديد من التخصصات الأخرى.
ويرد التعريف العام للتكنولوجيا النانو في موقع المبادرة الوطنية لتقنية النانو (NNI) وهو موقع حكومي امريكي (http://www.nano.gov). تم إنشاء وكالة NNI لتعزيز التقدم والريادة عالميا في مجال تقنية النانو داخل الولايات المتحدة. تعريف NNI لتقنية النانو هو:
"تقنية النانو هي فهم والسيطرة على المادة في أبعاد ما يقرب من 1 الى 100 نانومتر، حيث توجد ظواهر فريدة (unique phenomena ) تمكن تطبيقات جديدة غير مألوفة (novel applications) “.
« بانتقالنا الى العلوم والهندسة والتقنية النانوية الابعاد (nanoscale)، فإن تقنية النانو تتضمن التصوير (imaging)، والقياس (measuring)، والنمذجة (modeling)، والتعامل(manipulating) بالمادة على هذه الابعاد"
تعريف:
معظم الجامعات والمراكز البحثية فضلا عن الكيانات الخاصة والحكومية التي تستخدم او تتعامل مع تقنية النانو توفر التعريف المماثل والواضح الخاصة بها لتقنية النانو، لذا، فإن الدرس الأول حول تقنية النانو هو أن نفهم أنه هو حقل واسع متعدد التخصصات يشمل جميع فروع العلوم والهندسة والتكنولوجيا، وكذلك، إدارة الأعمال، والمالية، والاقتصاد، والعلوم الاجتماعية والطبية والعديد من التخصصات الأخرى.
ويرد التعريف العام للتكنولوجيا النانو في موقع المبادرة الوطنية لتقنية النانو (NNI) وهو موقع حكومي امريكي (http://www.nano.gov). تم إنشاء وكالة NNI لتعزيز التقدم والريادة عالميا في مجال تقنية النانو داخل الولايات المتحدة. تعريف NNI لتقنية النانو هو:
"تقنية النانو هي فهم والسيطرة على المادة في أبعاد ما يقرب من 1 الى 100 نانومتر، حيث توجد ظواهر فريدة (unique phenomena ) تمكن تطبيقات جديدة غير مألوفة (novel applications) “.
« بانتقالنا الى العلوم والهندسة والتقنية النانوية الابعاد (nanoscale)، فإن تقنية النانو تتضمن التصوير (imaging)، والقياس (measuring)، والنمذجة (modeling)، والتعامل(manipulating) بالمادة على هذه الابعاد"
Nanotechnology is making valuable contributions to
various scientific fields in science and technology today.
Generally, it is defined as the study, design, creation, synthesis,
manipulation, application of functional materials,
devices, and systems through control of matter at the nanometer
scale. It has been applied to many areas of study1 including
electronic engineering, physical sciences, materials
sciences, biomedical sciences and many others.
كان (Dr. Menzel ) رائدا في استخدام CdS شبه الموصل النانوي الوميضي (photoluminescent) لتعزيز الكشف عن البصمات الكامنة. تضمنت الفكرة استخدام الصبغ النانوي على المواد التي تم معالجتها مسبقا (pre-fumed) بـ (cyanoacrylate ester) وعلى الجانب اللزج من الشريط الكهربائي دون معالجة مسبقة.
تصوير متبقيات بصمة النانو
وضعت طريقة جديدة باستخدام تقنية (micro-X-ray fluorescence) للكشف عن صور من البصمات الكامنة، وخلافا لطرق المواد الكيميائية العادية حيث تُظَهَّر البصمة الكامنة من خلال التفاعلات بين المواد الكيميائية والأحماض الأمينية، أو الأحماض الدهنية من بصمات الأصابع، فإن تقنية MXRF يولد صور بصمات الأصابع الكامنة بالكشف عن العناصر غير العضوية في البصمة بالإضافة الى كونه أكثر فائدة بسبب طبيعة التحليل غير المتلفة (non-destructive) واستقرار المتبقيات غير العضوية، حيث تظل البصمات سليمة أثناء التحليل ويمكن استخدامها لإجراء فحوص إضافية، مثل التحليل العنصري (elemental analysis) عن متبقيات طلقات نارية، وتبقى طبعات البصمة ممكنة التصوير حتى ثمانية أشهر تقريبا ضمن آليات تخزين مناسبة للأدلة. أكثر المتبقيات غير العضوية شيوعا التي تلاحظ في بصمات الأصابع هي ايونات البوتاسيوم والكلوريد ، اضافة الى اعناصر أخرى يمكن العثور عليها في الطبعات الكامنة التي يكشفها MXRF تشمل السيليكون والكالسيوم والألومنيوم. ومع ذلك، فإن لهذه الطريقة عيب واحد، الا وهو اعتماد التركيب العنصري للبصمة على الشخص و / أو نظامه الغذائي، وهذا الأسلوب لا يمكن تطبيقه على كل الحالات لأن MXRF يوفر في الواقع
تحليل عنصري للعناصر غير العضوية الموجودة في بصمات الأصابع، كما ان اية مواد غير مكونات البصمة يمكن أيضا ان يتم الكشف عنها أو تصويرها بما في ذلك العرق، والمطريات، واللعاب، والواقي من الشمس. يمكن، على سبيل المثال، الكشف عن والمطريات والواقي من الشمس بسبب متبقيات TiO2 أو ZnO النانوية، في حين يمكن الكشف عن العرق نظرا الى المكونات غير العضوية. وعلاوة على ذلك فإن تقنية MXRF يمكن استخدامها لفحص الاستهلاك الغذائي من خلال ربط العناصر المكتشفة في اللعاب وبقايا الطعام الموجودة في بصمات الأصابع للتحقيق حالات الأطفال المفقودين.
استخدم AFM لأول مرة في سويسرا لدراسة معبر الحبر (ink crossing) في وثائق لتحديد تسلسل حركة القلم. AFM يمكنه دراسة تشكل (morphology) السطح ثلاثي الابعاد (3-D) الذي يوفر معلومات أساسية لتحديد تسلسل الخطوط التي صنعتها كرة حبر القلم وصبغ الشريط . أظهرت الصور التي حصلنا عليها من AFM نفس المعلومات النوعية نفسها التي تظهرها الصور التي نحصل عليها في SEM. وعلاوة على ذلك، وحيث ان AFM يمكن تشغيله تحت ظروف محيطة دون تفريغ وطلاء موصل للعينات، فإن الأضرار المحتملة للعينة خلال الفحص يمكن تجنبها. يعرض الشكل ادناه صور عمق معبر الحبر، والسعة والطور للحبر على الورقة حيث يمكن تحديدها تسلسل العبور بوضوح.
في الشكل:
(A) صورة مجهرية ضوئية (optical micrograph ) لمنطقة مسح عبور الحبر.
(B) صورة الارتفاع ثلاثية الابعاد 3D تظهر ان الحبر الأحمر وضع على الورقة اولا ثم وضع فوقه الحبر الأزرق.
(C) صور ارتفاع منطقة المسح الضوئي، ومستشعرZ-، والسعة والطور
تم استخدام AFMفي حل واحدة من أكثر القضايا الحاسمة في العلوم الجنائية الا وهو تقدير وقت الوفاة. التغيرات السطحية (morphological) في خلايا الدم يمكن أن تكون مفيدة لتقييم وقت الوفاة كمياً. تم مراقبة تشوه الخلايا وأسطح أغشية الكريات الحمراء غير المثبتة مع مرور الوقت. استغرق حدوث التشققات وانكماش الخلايا نصف يوم. بدأت تظهر نتوءات أكثر على الكريات الحمراء في 2.5 يوم. عدد زاد عدد النتوءات مع الوقت، مما يمكن أن تستخدم كمؤشر لتقدير وقت الوفاة. يمكن أن تأتي النتوءات من عدة مصادر. احدها عندما يتدفق الهيموغلوبين في السيتوبلازم إلى الخارج عندما يتسبب الجفاف (dehydration) بتشكيل ثقوب في أغشية الخلايا، والمصدر الثاني الممكن هو بروتينات الغشاء. وبالإضافة إلى ذلك، فإن بروتينات الهيكل الخلوي تكشف ان الغشاء أصبح أرق بسبب الجفاف. تشير هذه النتائج الى أن AFM سيكون أداة جديدة محتملة في الطب الشرعي لتقدير
وقت الوفاة، ويمكنه أيضا تحليل الأنسجة الأخرى، والأغشية والعينات البيولوجية.
5.3. تقدير عمر بقع الدم الجاف
تم استخدام تقنية التحليل الطيفي AFM Force Spectroscopy لتحديد عمر بقع دم جافة . في هذه الدراسة الأولية تم تحليل التغيرات في مرونة الكريات الحمراء على المقياس النانومتري عبر إجراء من خطوتين. في الخطوة الأولى، انتجت صورة شاملة تظهر وجود عدة خلايا دم حمراء، والتي يمكن أن تكشف بسهولة بحكم مظهرها النموذجي. بعد ذلك، تم استخدام AFM لاختبار المرونة من خلال تسجيل منحنيات قوة - مسافة. وكانت القياسات قد أجريت مباشرة بعد التجفيف وبعد 1.5 ساعة، 30 ساعة و31 يوما. وتحت ظروف ثابته تشمل درجة حرارة الغرفة (20 C) ،ورطوبة 30٪ . نمط المرونة انخفض مع مرور الوقت، والذي من المرجح أنه تأثر بالتغيير في بقع دم خلال عمليات التجفيف والتخثر (coagulation). عندما يرسم منحنى معايرة للمرونة مع الزمن، يكون ممكنا تقدير عمر بقعة الدم ومن ثم تستخدم للمساعدة في التحقيقات الجنائية.
استخدمت تقنية AFM في تحليلات الياف النسيج والمواد اللاصقة الحساسية للضغط. تم دراسة الألياف الطبيعية (القطن والصوف)،وألياف السليلوز المصنع بتعريضها لإجهادات بيئية لفترات زمنية وتم تحليل بواسطةAFM . استخدمت صور AFM لقياس معاملات سطح نسيج الأقمشة الموضوعة تحت تأثير الإجهاد البيئي كميا مع مدة التعرض للإجهاد. تم ملاحظة تفاصيل دقيقة على المستوى النانوي من أسطح الأقمشة الثلاث التي تم اختبارها بيئياً، حيث يمكن التمييز بوضوح بين
الآثار الضارة المترتبة على الظروف البيئية المفروضة.
تمثل الإجهاد البيئي في تعريض الأنواع الثلاثة من الألياف لنوعين من التربة (المدينة والنهر) ونوعين مختلفين من الماء (البرك والمياه) لفترات زمنية من اسبوعين واربعة أسابيع وستة أسابيع. تم تحليل مورفولوجيا سطح كل عينة عن متوسط أقصى ارتفاع، ومتوسط أقصى عمق الوادي القصوى، ومربع متوسط والجذر للخشونة وغيرها من المعالم لقياس التغييرات تحت ظروف مختلفة. أظهرت هذه الدراسة إن تقنيةAFM تعتبر أداة قوية جدا في الفحوصات الجنائية للألياف كأدلة نظرا لقدرته على التمييز بين مختلف المخاطر البيئية على الألياف أو اتلافها بقوى خارجية.
اللواصق الحساسة للضغط مثل تلك المستخدمة في التعبئة والتغليف والأشرطة اللاصقة، وكثيرا ما تستخدم في الأنشطة الإجرامية. ويمكن استخدام أشرطة التغليف للحزم التي تحتوي على المخدرات، المتفجرات، أو الوثائق، في حين تستخدم الأشرطة اللاصقة والكهربائية لربط الضحايا في قضايا الاختطاف. تظهر صور AFMالمناطق المظلمة والمضيئة المقابلة لجزيئات البوليمر للأسطح الناعمة والخشنة، على التوالي، على ثلاثة أشرطة تم فحصها. يمكن التفريق بين الخصائص الميكانيكية لمختلف الأشرطة من خلال أقصى قوة لصق للجسيمات المكونة للمنطقة اللاصقة والمسافة القصوى لتشوه هذه الجسيمات وطاقة الألتصاق. وأفادت العديد من الدراسات أيضا تطبيقات أخرى
من AFM في التحقيقات الجنائية. أحد الأمثلة أيضاً الطريقة الحاسوبية
التي تحسب للتقييم الكمي للشعر. مثال آخر في تحليل تصوير توزيع حجم جسيمات مسحوق رذاذ تعزيز البصمات الكامنة .
استخدمت جسيمات الذهب النانوية على نحو مثير لتعزيز فعالية تفاعل البلمرة المتسلسل (polymerase chain reaction)، فعندما اضيفت جسيمات الذهب النانوية ذات الابعاد 0.7 نانومتر و 13 نانومتر الى كاشف PCR انخفضت مدة التفاعل، بينما انخفض معدل دورة التدفئة / التبريد الحرارية. أظهرت النتائج أيضا أن حساسية PCR تحسنت 5 ~ 10 مرات عن PCR التقليدية، وأكثر من 10000 مرة في PCR الحقيقي. ويعزى التحسن الملحوظ في كفاءة PCR إلى خاصية جسيمات الذهب النانوية المتميزة في نقل الحرارة. وقد بدأت مجموعات بحثية عديدة في الاستفادة من هذه الخاصية النانوية لأبحاث البيولوجيا المتعلقة بالعلوم الجنائية.
تقدم تقنية النانو امكانات كبيرة وخدمات جليلة لصالح المجتمع؛ لكن تلك المواد النانوية لديها بالتاكيد خصائص غير معروفة يمكن أيضا أن يسبب مخاطر على الإنسان والبيئة. والمصدر الأساسي للمخاطر الناجمة عن المواد النانوية هو عدم معرفتنا بالآثار الصحية، رغم أن الأدلة المباشرة التي تمكننا من استنتاج أن كل المواد النانوية مضرة للبيئة والصحة محدودة. ولكن وبشكل عام يمكننا القول انه كلما صغر حجم الجسم النانوي كلما زادت خطورته لان الجسم الاصغر يستطيع ان يخترق مناطق اكثر في الجسم، فلنفس الكمية من عينة جسيمات نانوية، فإن الجسيمات الأصغر ستتمكن من ملامسة مساحة اوسع من المادة التي تتفاعل معها من جسم الإنسان وبالتالي فإنها من المحتمل ان تتفاعل اكثر مع مكوناته. يمكن أن تدخل المواد النانوية لاجسامنا من خلال ثلاثة مسارات الابتلاع والاستنشاق، والجلد
الامتصاص والابتلاع. يمكن نظريا فهم خطورة السمية النانوية من خلال الاستنشاق مثلا، يمكن للجسيمات النانوية ان تتجول في جميع أنحاء الجهاز التنفسي والدخول في الخلايا، ومجرى الدم والدورة الدموية الليمفاوية مما يمكنها من أن تخترق النخاع العظمي، والعقد الليمفاوية
والطحال، والقلب. بالإضافة إلى ذلك، فإنها يمكن أن تعبر حاجز الدم في الدماغ وتخترق النظام العصبي المركزي والعقد العصبية، مما تسبب في أشد الضرر لجسم الإنسان.
في عام 2006، وبعد استخدام بخاخ "ماجيك نانو" في ألمانيا، شكا أكثر من 80 شخصا من الحمى والصداع وصعوبة في التنفس، والعديد ذهب إلى المستشفى بسبب آلام رئوية. هذا البخاخ تم تصنيعه لتعزيز مقاومة الزجاج والسيراميك والبلاط للرطوبة والأوساخ . أصدر المعهد الاتحادي الألماني لتقييم المخاطر تحذيرا من استخدام المنتجات المنزلية التي تحتوي على منتجات تكنولوجيا النانو وقد أدى ذلك الحادث الى سحب هذه المنتجات من الأسواق الالمانية.
علم السموم النانوي ما زال حقل جديد للبحث، ولكن تخفيض، أو إزالة، السمية المرتبطة بالمواد النانوية الجديدة، النانو والأجهزة النانوية هو من أهمية قصوى.
مع التطور المستمر لتكنولوجيا النانو، سيتم علماء الطب الشرعي تواجه مختلف الأدلة في المقياس النانوي في المستقبل. عندما المهنيين العملية هذه الأدلة-نانو، لأنها قد تثير الأسئلة التالية: كيف يمكن لي معالجة هذا النوع من الأدلة بشكل صحيح؟ سوف هذه الأدلة-نانو تكون سامة بالنسبة لي؟ كيف أحمي وزملائي ونفسي؟ علماء الطب الشرعي سوف بحاجة إلى معرفة المزيد من المعلومات في تقنية النانو ذات الصلة الحقول. تايوان لديها إمكانات كبيرة وقدرة على أن تصبح واحدة من الدول الرائدة في مجال تطبيق تكنولوجيا النانو ل علوم الطب الشرعي. من تجربة المؤلف الشخصية، و"متوسط" التأهيل والمعرفة العامة الطب الشرعي العلماء في تايوان هي أفضل من غيرها في معظم البلدان. لذا، على الجمع بين العلم الشرعي مع تكنولوجيا النانو وإنشاء بيئة الرائدة في العالم ليس "مهمة مستحيلة". ويمكن تحقيق ذلك عن طريق وضع التركيز على تطوير البحوث التربوية للمساعدة توفير القوى العاملة الماهرة والبنية التحتية الداعمة / الأدوات اللازمة لتطوير تكنولوجيا النانو. وهذا من شأنه يتطلب أيضا تحسين الاستفادة من أدوات القياس مختبر الطب الشرعي، بالتزامن مع المعدات التي يمكن أن تؤدي تحليل النانو. أخيرا، لمواصلة تطوير الطب الشرعي جديدة والدراسات ذات الصلة، فرص التبادل على المدى الطويل ويجب أن يسعى علماء الطب الشرعي الدولي لضمان وعينا على آخر التطورات في الطب الشرعي علوم وتكنولوجيا النانو. تطوير الأبحاث والتعليم، و القوى العاملة الماهرة والبنية التحتية الداعمة و أدوات للتقدم تكنولوجيا النانو.
مرحبا بكم في NanoWorld، حيث تكنولوجيا النانو هو كل مكان واسع الانتشار. تكنولوجيا النانو هو حقل الناشئة في جميع مجالات العلوم والهندسة والتكنولوجيا. قريبا، سوف الكثير من العمل في تكنولوجيا النانو تجاوز نفسه من البحث في المنتجات والسلع سوف نستخدم. النظر في حقيقة أن أجهزة الكمبيوتر والهواتف المحمولة، MP3، والتحكم لعبة فيديو قد تصبح أضعافا مضاعفة أصغر حجما وأكثر قوة على مدى السنوات ال 10 الماضية.
قبل فترة طويلة، فإن المواد التي تم تطويرها من خلال تكنولوجيا النانو يؤدي إلى أمور مثل الألواح الشمسية أفضل تكون أكثر كفاءة في تحويل الطاقة الشمسية إلى كهرباء. مواد أقوى وأخف وزنا يمكن ان تحل محل الصلب لتشييد المباني والهياكل. وأدوات أفضل لنقل الأدوية إلى المرضى وتحليل الدم والخلايا، وما إلى ذلك الحقل تكنولوجيا النانو سوف تستمر في توسيع وتوفير الفرص لجميع المهتمين بغض النظر عن التخصص الوظيفي.
One important point:
Carbon nanotubes have “Chirality”
The Graphene sheet that make up the outer wall of the nanotube can be wrapped in a variety of ways such that the honeycomb lattice of the graphite is at varying relative orientations to the tube’s long axis.