This document is Shishu Pal's seminar report on spintronics submitted in partial fulfillment of a bachelor's degree in electronics and communication engineering. The report contains a declaration by Shishu Pal, a certificate signed by their advisors, acknowledgements, an abstract on spintronics, a table of contents and list of figures. The report explores the emerging field of spintronics which uses the spin of electrons in devices rather than just their charge. It discusses technologies like giant magnetoresistance and applications in memory chips, sensors and other devices.
In this presentation file, i have briefly explained about Spintronics. it is a really new and a good concept for pressentation purpose. Hope it is helpful to you.
very basic introduction of newly emerging technology in electronics called SPINTRONICS.
Quantum mechanics property called SPIN based electronics technology using both quantum mechanical and electronics property of electron i.e "SPIN+ELECTRONICS=SPINTRONICS"
Spintronics is a NANO technology which deals with spin dependent properties of an electron instead of charge dependent properties.
One of the main advantage of spintronics over electronics is the magnets tend to stay magnetize which is sparking in the industry an interest for replacing computer’s semiconductor based components with magnetic ones, starting with the RAM.
With an all-magnetic RAM, it is now possible to have a computer that retains all the information put into it. Most importantly, there will be no ‘boot-up’ waiting period when power is turned on.
Another promising feature of spintronics is that it doesn’t require the use of unique and specialized semiconductor, there by allowing it to work with common metals like Cu, Al, Ag.
Spintronics will use less power than conventional electronics, because the energy needed to change spin is a minute fraction of what is needed to push charge around.
Conventional electronic devices ignore the spin property and rely strictly on the transport of the electrical charge of electrons.
Adding the spin degree of freedom provides new effects, new capabilities and new functionalities.
IEEE presentation based on Spintronics & its semiconductor application specifically.
In the conclusion there is a hyperlink of a video which i'm unable to put here and hence i will give you the address of the video so that you can use the video and make the same hyperlink as i had made here.
TEDxCaltech-David Awschalom - Spintronics ( On YouTube)
video : 6:21- 7:13 (in video)
In this presentation file, i have briefly explained about Spintronics. it is a really new and a good concept for pressentation purpose. Hope it is helpful to you.
very basic introduction of newly emerging technology in electronics called SPINTRONICS.
Quantum mechanics property called SPIN based electronics technology using both quantum mechanical and electronics property of electron i.e "SPIN+ELECTRONICS=SPINTRONICS"
Spintronics is a NANO technology which deals with spin dependent properties of an electron instead of charge dependent properties.
One of the main advantage of spintronics over electronics is the magnets tend to stay magnetize which is sparking in the industry an interest for replacing computer’s semiconductor based components with magnetic ones, starting with the RAM.
With an all-magnetic RAM, it is now possible to have a computer that retains all the information put into it. Most importantly, there will be no ‘boot-up’ waiting period when power is turned on.
Another promising feature of spintronics is that it doesn’t require the use of unique and specialized semiconductor, there by allowing it to work with common metals like Cu, Al, Ag.
Spintronics will use less power than conventional electronics, because the energy needed to change spin is a minute fraction of what is needed to push charge around.
Conventional electronic devices ignore the spin property and rely strictly on the transport of the electrical charge of electrons.
Adding the spin degree of freedom provides new effects, new capabilities and new functionalities.
IEEE presentation based on Spintronics & its semiconductor application specifically.
In the conclusion there is a hyperlink of a video which i'm unable to put here and hence i will give you the address of the video so that you can use the video and make the same hyperlink as i had made here.
TEDxCaltech-David Awschalom - Spintronics ( On YouTube)
video : 6:21- 7:13 (in video)
a branch of nano electronics that will improve technology by adding new freedom degrees to electronic for transfer and store information better than electronic devices :)
The developing technology, the future, a tech that can replace the electronics era itself.
Few information about the tech and the fundamentals of Spintronics.
Very basic introduction to latest emerging technology in electronics called SPINTRONICS.
Quantum Mechanics property of electron called SPIN combine with the electronic property of electron .i.e SPIN+ELECTRONICS=SPINTRONICS
The concept, application of Giant Magneto Resistance is being discussed in the slides
The discovery of this phenomenon has caused vast developments in the field of spintronics
Spintronics also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices
a branch of nano electronics that will improve technology by adding new freedom degrees to electronic for transfer and store information better than electronic devices :)
The developing technology, the future, a tech that can replace the electronics era itself.
Few information about the tech and the fundamentals of Spintronics.
Very basic introduction to latest emerging technology in electronics called SPINTRONICS.
Quantum Mechanics property of electron called SPIN combine with the electronic property of electron .i.e SPIN+ELECTRONICS=SPINTRONICS
The concept, application of Giant Magneto Resistance is being discussed in the slides
The discovery of this phenomenon has caused vast developments in the field of spintronics
Spintronics also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices
Heliodisplay is a technology used for displaying images in mid air.
Invented by Chad Dyner.
In the heliodisplay, a projector focuses the image onto a layer of mist in mid-air, resulting in a two-dimensional display that appears to float.
Hi-Tech projector that display pictures in the air.
An interactive free space display developed by IO2 technologies.
It is a planar display i.e. 2D not 3D.
Works as a free space touch screen when connected to PC.
Eco-friendly , low power consuming and various image and video formats.
The device converts the imaging properties of the air so that the air is taken in, converted instantaneously, and then re-ejected out.
The system thus creates a dynamic, non solid particle cloud by ejecting atomized condensate present in the surrounding air.
Now the projector projects the given input on the found invisible screen.
Digital voltmeter using 89c51 microcontrollerSaylee joshi
Voltmeter is a voltage measuring instrument.
We can measure the potential difference between any two points in an electrical network using voltmeter.
There are two types of voltmeter as analog voltmeter and digital voltmeter.
Analog voltmeter moves pointer on a scale but it has some limitations like accuracy of few percent of full scale.
Digital voltmeter can display numerical value of voltage on a display by use of analog to digital converter (ADC).
All the data processing and manipulating is in digital form, so it is very essential to use ADC.
We have used ADC0804 analog-to-digital converter IC. The range of input voltage is 0-15V. Here the input voltage should be DC voltage so as to get the steady output on the LCD display.
If you give the AC voltage as an input, it will display continuously running numbers as the nature of AC voltage.
Mobile Voting System Using Advanced NFC Technologyijsrd.com
Electronic voting system are becoming popular with wide spread use of computer and embedded system. Security is the main important issue should be considered in such system. Mobile voting system is basically used for collecting and counting votes. In this technology include punch card, optical scan voting system. This paper proposes a new Mobile based voting system using advanced NFC technology, Voting is the process that allows the general public or the people to choose their leaders and articulate views on how they will be governed. This gives a comprehensive analysis of security with respect to NFC. This study deals with the use of information technology to handle electoral processes starting from voters and candidates registration to the actual casting and counting of ballots. Exploring mobile voting from a systems perspective can demonstrate the attributes of the current systems and the possible solutions for the voting process so any one can caste their vote from any place.
Abstract The dynamic nature of loads, seasonal variation of soil properties, uneven soil strata below footings or inappropriate design of foundation makes differential settlement inevitable. Differential settlement is largely responsible for developing forces or changing the existing forces in the structure and is often considered as the underlying cause of many structural failures. A structural engineer has to take into account these forces while designing the structure. Different structural parameters like stiffness of columns and beams and number of storeys and bays affect the response of the structure to differential settlement. In the present study, a plain portal frame subjected to constant differential settlement of 10 mm is analyzed for different cases using a structural analysis software i.e. STAAD Pro. Different parameters of the frame are varied to understand their influence on frame forces developed due to differential settlement. The parameters taken into account in this study are length of beam, height of column, moment of inertia of beam and column and number of storeys and bays. It is found that the forces in the frame developed due to differential settlement decrease on increasing beam lengths and column heights. Also, decreasing the moment of inertia of beams and columns is effective in reducing these forces. In addition, differential settlement tends to affect forces more in lower storeys as compared to higher storeys. The frame forces are more prominent for bays which are near to the support subjected to settlement. The increase or decrease in frame forces due to differential settlement can be attributed to the change in stiffness of the members. Hence, the study concludes that the stiffer members tend to develop higher forces for constant differential settlement in frames. Key Words: Differential settlement, Portal frame, Structural response, Frame forces, Storey, Bays
IPTV India Progress Report 2009 by Knowledgefaber - Market AnalysisAmit Goel
Knowledgefaber report is on the progress of IPTV in the Indian market (2009). For more details on the IPTV market in India visit www.knowledgefaber.com and write to inquiry@knowledgefaber.com
The magnetically sensitive transistor (also known as the spin transistor or spintronic transistor—named for spintronics, the technology which this development spawned), originally proposed in 1990 and currently still being developed, is an improved design on the common transistor invented in the 1940s. The spin transistor comes about as a result of research on the ability of electrons (and other fermions) to naturally exhibit one of two (and only two) states of spin: known as "spin up" and "spin down". Unlike its namesake predecessor, which operates on an electric current, spin transistors operate on electrons on a more fundamental level; it is essentially the application of electrons set in particular states of spin to store information.
Smart cards are typically credit card sized, plastic credentials containing a microprocessor chip that serves the dual functions of communication and extensive data storage. Although it is packaged in the form of a card, a smart card operates much like a personal computer in that it can store data, manipulate data, and perform functions like mathematical equations. Smart cards normally contain application fields/sectors secured by special, application-specific security keys (much like keys that unlock various rooms in a building). These sectors can contain information for various applications – such as access control, cashless vending, mass transit, and payment systems – securely separated from one other by security keys. Smart cards can come in two forms: contact and contactless. Contact smart cards operate much like magnetic stripe cards (credit cards, etc.), requiring insertion into or direct contact with a reader. Contactless cards are read when presented near or in “proximity” to a reader
It was a professional presentation for niksun, but most of the project related content and designs are removed. Only basics and some feature of IPTV is uploaded in these slides.
In this presentation, basics of solar cells, what is piezoelectricity and its application, followed by basics of thermoelectricity and its application would be discussed.
Wireless Mobile Charging Using MicrowavesJishid Km
It is a hectic task to carry everywhere the charger of mobile phones or any electronic gadget while travelling, or it is very cruel when your mobile phone getting off by the time you urgently need it. It is the major problem in today’s electronic gadgets. Though the world is leading with the developments in technology, but this technology is still incomplete because of these limitations. Today’s world requires the complete technology and for this purpose here we are proposing the wireless charging of batteries using Microwaves.
Now in the recent days we come across some solutions for this problem by using the Witricity (Wireless Transmission of Electricity). Recently Nokia has launched Nokia Lumia 920 smart phones whose special feature is its wireless charging. But this is possible only when the device is placed on to the plate given for the wireless charging. So it is also somewhat difficult to travel with those charging plates. There may chance has forgetting the charging plates, and then we require something which can charge our electronic gadgets whenever they get used
The proposed method gives the solution for this problem. Once think that how it will be when your electronic gadget gets charged on using it? Then the label will come as “CHARGE ON USE”. This wireless charging method works on the principle of MICROWAVE OVEN. As the things when placed in microwave oven gets heated, in the same way these batteries should work using microwaves which are the medium of communication from long back. We are getting our network in terms of microwaves and it is proved that the total radiation coming from the cellular mobile communication is not been using and the remaining radiation is creating hazardous problem for human beings. So here we are working on the concept that why can’t we use those remaining radiations in order to charge our batteries? This will be the best solution to reduce the effect of radiation.
In our conventional electronic devices we use semi conducting materials for logical operation and magnetic materials for storage, but spintronics uses magnetic materials for both purposes. These spintronic devices are more versatile and faster than the present one. One such device is Spin Valve Transistors (SVT).
Spin valve transistor is different from conventional transistor. In this for conduction we use spin polarization of electrons. Only electrons with correct spin polarization can travel successfully through the device. These transistors are used in data storage, signal processing, automation and robotics with less power consumption and results in less heat. This also finds its application in Quantum computing, in which we use Qubits instead of bits.
Magnetic levitation is a technique that has undergone extensive testing over the last few decades. For the past ten years, scientists have not begun to develop transport solutions based on magnetic levitation. This study describes the basic methods of magnetic levitation and the techniques it uses. Large scale magnetic levitation has major social and economic implications for the development of the transportation system. These elements are put to the test in a variety of scenarios to see if the time and effort invested in building a magnet based system was justified. Jacob Antony | Ebin Antony | Saji Sebastian "A Review on Magnetic Levitation Vehicles" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-1 , December 2021, URL: https://www.ijtsrd.com/papers/ijtsrd48009.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/48009/a-review-on-magnetic-levitation-vehicles/jacob-antony
Spintronics is the new technology that is used in nano technology or difficult projects.The rotation of electrons is called Spintronics.I hoped this topic is useful for you and your study.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Search and Society: Reimagining Information Access for Radical Futures
Spintronics Report
1. A
Seminar Report on
“Spintronics”
submitted for partial fulfilment of award of
BACHELORS OF TECHNOLOGY
degree
in
Electronics and Communication Engineering
by
Shishu Pal
(Roll No.1213331191)
Submitted to
Ms. Kanika Jindal (AP, ECE Deptt.)
Ms. Gitanjali Anand (AP, ECE Deptt.)
Mr.Devendra Pratap(AP, ECE Deptt.)
NOIDA INSTITUTE OF ENGINEERING & TECHNOLOGY
GREATER NOIDA
March, 2015
2. DECLARATION
I hereby declare that the seminar report which is being presented in the entitled “Spintronics,”
in partial fulfillment of the requirements for the award of degree of Bachelors of Technology in
Electronics and Communication Engineering in the Department of Electronics and
Communication Engineering from Noida Institute of Engineering and Technology, Greater
Noida, is an authentic record of my own carried out under the supervision of Mr. Devendra
Pratap Singh and Ms. Kanika Jindal, Assistant Professor, Department of ECE.
Date:17/03/2015 SHISHU PAL
Roll. No. 1213331191
3. CERTIFICATE
Certified that seminar work entitled “Spintronics ” is a bonafide work carried out in the sixth
semester by “Shishu Pal” in partial fulfilment for the award of Bachelor of Technology in
Electronics and Communication Engineering from Uttar Pradesh Technical University during
the academic year 2013-2014 who carried out the seminar work.
Date: 17/03/2015 Ms.Kanika Jindal
Ms. Gitanjali Anand
Mr. Devendra Pratap Singh
4. ACKNOWLEDGEMENT
It gives me great pleasure to present my seminar report on “Spintronics”. No work , however
big or small, has ever been done without the contributions of others.
It would be a great pleasure to write a few words, which would although not suffice as the
acknowledgement of this long cherished effort, but in the absence of which this report would
necessarily be incomplete. So these words of acknowledgement come as a small gesture of
gratitude towards all those people, without whom the successful completion of this project would
not have been possible.
I would like to express deep gratitude towards Ms. Gitanjali Anand (Associate Professor of
ECE Dept.) & Ms. Kanika Jindal (Associate Professor of ECE Dept.) who gave me their
valuable suggestions, motivation and the direction to proceed at every stage. They are like a
beam of light for us. Their kind guidance showed us the path of life and is unforgettable. They
extended towards their valuable guidance, indispensable help and inspiration at times in
appreciation I offer them my sincere gratitude.
Last but not least we would like to thank the Department of Electronics and communication
Engineering, NIET, Gr. Noida for providing me with the facilities to lab, and all staff members
of ECE Dept., it would have been impossible for me to complete my project without their
valuable guidance & prompt cooperation.
I have tried my level best to make this seminar report error free ,but I regret for errors, if any.
5. ABSTRACT
Spintronics is an emergent technology that exploits the quantum propensity of the electrons to
spin as well as making use of their charge state. The spin itself is manifested as a detectable
weak magnetic energy state characterised as ―spin up‖ or ―spin down‖.
Conventional electronic devices rely on the transport of electrical charge carriers – electrons – in
a semiconductor such as silicon. Now, however, device engineers and physicists are inevitably
faced the looming presence of quantum mechanics and are trying to exploit the spin of the
electron rather than its charge. Devices that rely on the electron‘s spin to perform their functions
form the foundations of spintronics (short for spin-based electronics), also known as magneto
electronics. Spintronics devices are smaller than 100 nanometre in size, more versatile and more
robust than those making up silicon chips and circuit elements. The potential market is worth
hundreds of billions of dollar a year.
Spintronics burst on the scene in 1988 when French and German physicists discovered a very
powerful effect called Giant Magneto resistance (GMR). It results from subtle electron-spin
effects in ultra thin multilayer of magnetic materials, which cause huge changes in their electrical
resistance when a magnetic field is applied. This resulted in the first spintronics device in the
form of the spin valve. The incorporation of GMR materials into read heads allowed the storage
capacity of a hard disk to increase from one to 20 gigabits. In 1997, IBM launched GMR read
heads, into a market worth around a billion dollars a year.
The field of spintronics is relatively young and it is difficult to predict how it will evolve. New
physics is still being discovered and new materials being developed, such as magnetic
semiconductors and exotic oxides that manifest an even more extreme effect called Colossal
Magneto resistance.
6. TABLE OF CONTENTS
CHAPTER NO. TITLE PAGE NO.
DECLARATION ii
CERTIFICATE iii
ACKNOWLEDGEMENTS iv
ABSTRACT v
TABLE OF CONTENTS vi
LIST OF FIGURES vii
1. INTRODUCTION 01
2. MOTIVATION 02
3. TECHNOLOGY DESCRIPTION 03
3.1Gaint Magneto resistance 04
3.2 Construction of GMR 05
3.3 Spin Valve GMR 07
3.4 Memory Chips 08
3.5 GMR Sensor 09
3.6 Spintronics Devices 09
MRAM 10
Spin Transistors 11
Quantum Computer 14
Spintronics Scanner 16
3.7 Advantages / Disadvantages 19
3.8 Real Time Applications 20
4. CONCLUTION AND FUTURE SCOPE 22
5. Reference 25
7. LIST OF FIGURES
S.NO. TITLE PAGE NO.
1. Electron spinning 02
2. Magnetic Orientation of electrons 03
.
3. A GMR Device 04
4. Construction of GMR 06
5. GMR based Spin Valves for read head In hard drives 07
6. GMR Sensor 09
7. MRAM 11
8. Spin based transistor 12
9. Spin polarized field effect Transistor 12
8. INTRODUCTION
Conventional electronic devices rely on the transport of electrical charge carriers –electrons in a
semiconductor such as silicon. Now, however, physicists are trying to exploit the ‗spin‘ of the
electron rather than its charge to create a remarkable new generation of spintronics‘ devices
which will be smaller, more versatile and more robust than those currently making up silicon
chips and circuit elements.
Imagine a data storage device of the size of an atom working at a speed of light. Imagine a
computer memory thousands of times denser and faster than today‘s memories and also imagine
a scanner technique which can detect cancer cells even though they are less in number. The
above-mentioned things can be made possible with the help of an exploding science –
―Spintronics‖.
Spintronics is a technology which deals with spin dependent properties of an electron instead of
or in addition to its charge dependent properties. Conventional electronics devices rely on the
transport of electric charge carries-electrons. But there is other dimensions of an electron other
than its charge and mass i.e. spin. This dimension can be exploited to create a remarkable
generation of spintronics devices. It is believed that in the near future spintronics could be more
revolutionary than any other technology.
As there is rapid progress in the miniaturization of semiconductor electronic devices leads to a
chip features smaller than 100 nanometers in size, device engineers and physicists are inevitable
faced with a looming presence of a quantum property of an electron known as spin, which is
closely related to magnetism. Devices that rely on an electron spin to perform their functions
form the foundations of spintronics.
Information-processing technology has thus far relied on purely charge based devices ranging
from the now quantum, vacuum tube today‘s million transistor microchips. Those conventional
electronic devices move electronic charges around, ignoring the spin that tags along that side on
each electron.
9. MOTIVATION
The basic principle involved is the usage of spin of the electron in addition to mass and charge of
electron. Electrons like all fundamental particles have a property called spin which can be
orientated in one direction or the other – called ‗spin-up‘ or ‗spin-down‘ –like a top spinning
anticlockwise or clockwise. Spin is the root cause of magnetism and is a kind of intrinsic angular
momentum that a particle cannot gain or lose. The two possible spin states naturally represent
‘0‘and ‘1‘in logical operations. Spin is the characteristics that makes the electron a tiny magnet
complete with north and south poles .The orientation of the tiny magnet ‘s north-south poles
depends on the particle‘s axis of spin.
Fundamentals of spin:
1.In addition to their mass, electrons have an intrinsic quantity of angular momentum called spin,
almost of if they were tiny spinning balls.
2.Associated with the spin is magnetic field like that of a tiny bar magnet lined up with the spin
axis.
Fig.1. Electron spinning
2. Scientists represent the spin with a vector. For a sphere spinning ―west to east‖, the vector
points ― north‖ or ―up‖. It points ―south‖ or ―down‖ for the spin from ―east to west‖.
4. In a magnetic field, electrons with ―spin up‖ and ―spin down‖ have different energies.
5. In an ordinary electronic circuit the spins are oriented at random and have no effect on current
flow.
6. Spintronics devices create spin-polarized currents and use the spin to control current flow.
10. TECHNOLOGY DESCRIPTION
The use of the spintronics requires that the materials used to fabricate the spin devices should
possess the following requirements to be satisfied by the material:
Efficient electrical injection of spin – polarized carriers.
Efficient transmission during transport of carriers through semiconductor.
Capability to detect or collect spin – polarized current.
SPIN MATERIALS:-
The basic materials used in spin devices for manipulation of spin of electrons are the
ferromagnetic which have the capability to change the spin polarization on application of
magnetic fields.The spin materials can be classified into two groups:
Ferromagnetic Semiconductors
Half-Magnetic ferromagnets
Ferromagnetic Semiconductors
These are the materials with complete control over the spin electron. The main advantages of
these types of materials are:
Combined semiconducting and magnetic properties for multiple functionalities
Easy growth of ferromagnetic-semiconductor nanostructures.
Easy spin injection
Half-Magnetic ferromagnets
As name suggests the half – magnetic ferromagnets doesn’t have full control over spin of the
electrons. The spin materials can be obtained as: - Substitution of V, Cr and Mn into GaAs,
InAs,GaSb,GaP and InP.
Fig 2. Magnetic Orientation of electrons
11. Giant Magneto Resistance
Electrons like all fundamental particles have a property called spin which can be orientated in
one direction or the other – called „spin-up‟ or „spin-down‟ – like a top spinning anticlockwise
or clockwise. When electron spins are aligned (i.e. all spin-up or all spin-down) they create a
large-scale net magnetic moment as seen in magnetic materials like iron and cobalt. Magnetism
is an intrinsic physical property associated with the spins of electrons in a material.
Magnetism is already exploited in recording devices such as computer hard disks Data are
recorded and stored as tiny areas of magnetised iron or chromium oxide. To access the
information, a read head detects the minute changes in magnetic field as the disk spins
underneath it. This induces corresponding changes in the head‟s electrical resistance – an effect
called magneto resistance.
Spintronics burst on the scene in 1988 when French and German physicists discovered a much
more powerful effect called „giant magneto resistance‟ (GMR). It results from subtle electron-
spin effects in ultra-thin „multilayer’s‟ of magnetic materials, which cause huge changes in their
electrical resistance when a magnetic field is applied. GMR is 200 times stronger than ordinary
magneto resistance. IBM soon realised that read heads incorporating GMR materials would be
able to sense much smaller magnetic fields, allowing the storage capacity of a hard disk to
increase from 1 to 20 gigabits. In 1997 IBM launched GMR read heads, into a market worth
about a billion dollars a year.
The basic GMR device consists of a three-layer sandwich of a magnetic metal such as cobalt
with a nonmagnetic metal filling such as silver (see diagram).
Fig 3. A GMR Device
12. A current passes through the layers consisting of spin-up and spin-down electrons. Those
oriented in the same direction as the electron spins in a magnetic layer pass through quite easily
while those oriented in the opposite direction are scattered.
If orientation of one of the magnetic layers can easily be changed by the presence of a magnetic
field then the device will act as a filter, or „spin valve‟, letting through more electrons when the
spin orientations in the two layers are the same and fewer when orientations are oppositely
aligned. The electrical resistance of the device can therefore be changed dramatically.
The magneto resistant devices can sense the changes in the magnetic field only to a small extent,
which is appropriate to the existing memory devices. When we reduce the size and increase data
storage density, we reduce the bits, so our sensor also has to be small and maintain very, very
high sensitivity. The thought gave rise to the powerful effect called ―Giant Magneto resistance
(GMR).GMR is a quantum mechanical magneto resistance effect observed in thin film structures
composed of alternating ferromagnetic and non magnetic layers. The 2007 Nobel Prize in
physics was awarded to Albert Fret and Peter Gruenberg for the discovery of GMR.
Giant magneto resistance (GMR) came into picture in 1988, which lead the rise of spintronics. It
results from subtle electron-spin effects in ultra-thin ‗multilayer‘ of magnetic materials, which
cause huge changes in their electrical resistance when a magnetic field is applied. GMR is 200
times stronger than ordinary magneto resistance. It was soon realized that read heads
incorporating GMR materials would be able to sense much smaller magnetic fields, allowing the
storage capacity of a hard disk to increase from 1 to 20 gigabits.
Construction of GMR
The basic GMR device consists of a three-layer sandwich of a magnetic metal such as cobalt
with a nonmagnetic metal filling such as silver. Current passes through the layers consisting of
spin-up and spin-down electrons. Those oriented in the same direction as the electron spins in a
magnetic layer pass through quite easily while those oriented in the opposite direction are
scattered. If the orientation of one of the magnetic layers can easily be changed by the presence
of a magnetic field then the device will act as a filter, or ‗spin valve‘, letting through more
electrons when the spin orientations in the two layers are the same and fewer when orientations
are oppositely aligned. The electrical resistance of the device can therefore be changed
dramatically. In an ordinary electric current, the spin points at random and plays no role in
determining the resistance of a wire or the amplification of a transistor circuit. Spintronics
devices in contrast, rely on differences in the transport of ―spin up‖ and ―spin down‖ electrons.
13. Figure 4: Construction of GMR
A ferromagnet can even affect the flow of a current in a nearby nonmagnetic metal. For example,
in the present-day read heads in computer hard drives, wherein a layer of a nonmagnetic metal is
sandwiched between two ferromagnetic metallic layers, the magnetization of the first layer is
fixed, or pinned, but the second ferromagnetic layer is not. As the read head travels along a track
of data on a computer disk, the small magnetic fields of the recorded 1‘s and 0`s change the
second layer‘s magnetization back and forth parallel or antiparallel to the magnetization of the
pinned layer. In the parallel case, only electrons that are oriented in the favored direction flow
through the conductor easily. In the antiparallel case, all electrons are impeded. The resulting
changes in the current allow GMR read heads to detect weaker fields than their predecessors; so
that data can be stored using more tightly packaged magnetized spots on a disk.
GMR has triggered the rise of a new field of electronics called spintronics which has been used
extensively in the read heads of modern hard drives and magnetic sensors. A hard disk storing
binary information can use the difference in resistance between parallel and antiparallel layer
alignments as a method of storing 1s and 0s.
A high GMR is preferred for optimal data storage density. Current perpendicular-to-plane (CPP)
Spin valve GMR currently yields the highest GMR. Research continues with older current-in-
plane configuration and in the tunnelling magnetoresistance (TMR) spin valves which enable
disk drive densities exceeding 1 Terabyte per squar inch.
Hard disk drive manufacturers have investigated magnetic sensors based on the colossal magneto
resistance effect (CMR) and the giant planar Hall effect. In the lab, such sensors have
demonstrated sensitivity which is orders of magnitude stronger than GMR. In principle, this
could lead to orders of magnitude improvement in hard drive data density.
14. As of 2003, only GMR has been exploited in commercial disk read-and-write heads because
researchers have not demonstrated the CMR or giant planar hall effects at temperatures above
150K.
Magneto coupler is a device that uses giant magneto resistance (GMR) to couple two electrical
circuits galvanic isolated and works from AC down to DC.
Vibration measurement in MEMS systems.
Detecting DNA or protein binding to capture molecules in a surface layer by measuring the stray
field from super paramagnetic label particles.
Spin Valve GMR
If the orientation of one of the magnetic layers can easily be changed by the presence of a
magnetic field then the device will act as a filter, or ‗spin valve‘, letting through more electrons
when the spin orientations in the two layers are the same and fewer when orientations are
oppositely aligned. The electrical resistance of the device can therefore be changed dramatically.
Fig 5. Standard geometry for GMR based Spin Valve
An electron passing through the spin-valve will be scattered more if the spin of the electrons
opposite to the direction of the magnetisation in the Field.
15. Memory Chips
Physicists have been quick to see the further possibilities of spin valves. Not only are they highly
sensitive magnetic sensors , they can also be made to act as switches by flipping the
magnetisation in one of the layers. This allows information to be stored as 0s and 1s
(magnetisations of the layers parallel or antiparallel) as in a conventional transistor memory
device. An obvious application is a magnetic version of a random access memory (RAM) device
of the kind used in your computer. The advantage of magnetic random access memory (MRAM)
is that it is „non-volatile‟ – information isn‟t lost when the system is switched off. MRAM
devices would be smaller, faster, cheaper, use less power and would be much more robust in
extreme conditions such as high temperature, or highlevel radiation or interference. The US
electronics company Honeywell has already shown that arrays of linked MRAMS could be made
to work. The potential market for MRAMS is worth 100 billion dollars annually.
Over the past three years or so, researchers around the world have been working hard on a whole
range of MRAM devices. A particularly promising device is the magnetic tunnel junction, which
has two magnetic layers separated by an insulating metal-oxide layer. Electrons can tunnel
through from one layer to the other only when magnetisations of the layers point in the same
direction, otherwise the resistance is high – in fact, 1000 times higher than in the standard spin
valve.
Even more interesting are devices that combine the magnetic layers with semiconductors like
silicon. The advantage is that silicon is still the favourite material of the electronics industry and
likely to remain so. Such hybrid devices could be made to behave more like conventional
transistors. They could be used as non-volatile logic elements which could be reprogrammed
using software during actual processing to create an entirely new type of very fast computing.
The field of spintronics is extremely young and it’s difficult to predict how it will evolve. New
physics is still being discovered and new materials being developed, such as magnetic
semiconductors, and exotic oxides that manifest an even more extreme effect called colossal
magneto resistance. What is certain is that the time-span from a breakthrough in fundamental
physics to first commercial exploitation has been less than 10 years. The business opportunities
for spintronics are still wide open. European research collaborations, some involving the Us,
have a strong lead in developing the underlying physics and technology for this lucrative
fledgling industry.
16. GMR SENSORS
GMR sensors are already being developed in UK universities. They have a wide range of
applications and the market is worth 8 billion dollars a year. Applications include:
• Fast accurate position and motion sensing of mechanical components in precision engineering
and in robotics
• All kinds of automotive sensors for fuel handling systems, electronic engine control, antiskid
systems, speed control and navigation
• Missile guidance
• Position and motion sensing in computer video games
• Key-hole surgery and post-operative care
Figure 6: GMR Sensor
The magnetic property of a battery changes with SoC. A Sensor reads the change when exposed
to a magnetic field.
SPINTRONICS DEVICES
Spintronic devices are those devices which use the Spintronics technology. Spintronics-devices
combine the advantages of magnetic materials and semiconductors. They are expected to be non-
volatile, versatile, fast and capable of simultaneous data storage and processing, while at the
same time consuming less energy. Spintronics-devices are playing an increasingly significant
role in high-density data storage, microelectronics, sensors, quantum computing and bio-medical
applications, etc.
17. Electronic Devices v/s Spintronics Devices
Electronic Devices Spintronics devices
1. Based on properties of charge of the 1. Based on intrinsic property spin of electron.
electron
2. Classical property 2. Quantum property
4. Materials: conductors and semiconductors 4. Materials: ferromagnetic materials
5. Based on the number of charges and their 5. Two basic spin states; spin-up and spin-
energy down.
6. Speed is limited and power dissipation is 6. Based on direction of spin and spin and spin
high. coupling, high speed.
Some of the Spintronic devices are:
Magnetoresistive Random Access Memory(MRAM)
Spin Transistor
Quantum Computer
Spintronic Scanner
MRAM (Magneto resistive Random Access Memory)
An important spintronics device, which is supposed to be one of the first spintronics devices that
have been invented, is MRAM.
Unlike conventional random-access, MRAMs do not lose stored information once the power is
turned off...A MRAM computer uses power, the four page e mail will be right there for you.
Today pc use SRAM and DRAM both known as volatile memory. They can store information
only if we have power. DRAM is a series of capacitors, a charged capacitor represents 1 where
as an uncharged capacitor represents 0. To retain 1 you must constantly feed the capacitor with
power because the charge you put into the capacitor is constantly leaking out.
Fig 8. 256 K MRAM
18. MRAM is based on integration of magnetic tunnel junction (MJT). Magnetic tunnel junction is a
three-layered device having a thin insulating layer between two metallic ferromagnets. Current
flows through the device by the process of quantum tunneling; a small number of electrons
manage to jump through the barrier even though they are forbidden to be in the insulator. The
tunneling current is obstructed when the two ferromagnetic layers have opposite orientations and
is allowed when their orientations are the same.
MRAM stores bits as magnetic polarities rather than electric charges. When a big polarity points
in one direction it holds1, when its polarity points in other direction it holds 0. These bits need
electricity to change the direction but not to maintain them. MRAM is non volatile so, when you
turn your computer off all the bits retain their 1`s and 0`s.
SPIN TRANSISTORS
Traditional transistors use on-and-off charge currents to create bits- the binary zeroes and ones of
computer information. “Quantum spin field effect” transistor will use up-and-down spin states to
generate the same binary data. One can think of electron spin as an arrow; it can point upward or
downward; “spinup and spin-down can be thought of as a digital system, representing the binary
0 and 1. The quantum transistor employs also called “spin-flip” mechanism to flip an up-spin to
a downspin, or change the binary state from 0 to 1.
One proposed design of a spin FET (spintronic field-effect transistor) has a source and a drain,
separated by a narrow semi conducting channel, the same as in a conventional FET. In the spin
FET, both the source and the drain are ferromagnetic. The source sends spin-polarized electrons
in to the channel, and this spin current flow easily if it reaches the drain unaltered (top).
Fig 9: Spin Based Transistor
19. A voltage applied to the gate electrode produces an electric field in the channel, which causes the
spins of fastmoving electrons to process, or rotate (bottom). The drain impedes the spin
currentaccording to how far the spins have been rotated. Flipping spins in this way takes much
less energy and is much faster than the conventional FET process of pushing charges out of the
channel with a larger electric filed.
In these devices a non magnetic layer which is used for transmitting and controlling the spin
polarized electrons from source to drain plays a crucial role. For functioning of this device first
the spins have to be injected from source into this non-magnetic layer and then transmitted to the
collector. These non-magnetic layers are also called as semimetals, because they have very larger
spin diffusion lengths.The injected spins which are transmitted through this layer start processing
as illustrated in Figure before they reach the collector due to the spin-orbit coupling effect.
Fig.10 Spin polarized field effect transistor
Vg is the gate voltage. When Vg is zero the injected spins which are transmitted through the
2DEG layer starts processing before they reach the collector, thereby reducing the net spin
polarization. Vg is the gate voltage. When Vg >> 0 the precession of the electrons is controlled
with electric filed thereby allowing the spins to reach at the collector with the same polarization.
Hence the net spin polarization is reduced
20. Traditional transistors use on-and-off charge currents to create bits—the binary zeroes and ones
of computer information. ―Quantum spin field effect‖ transistor will use up-and-down spin
states to generate the same binary data. One can think of electron spin as an arrow; it can point
upward or downward; ―spin-up and spin-down can be thought of as a digital system,
representing the binary 0 and 1. The quantum transistor employs also called ―spin-flip‖
mechanism to flip an up- spin to a downspin, or change the binary state from 0 to 1.
One proposed design of a spin FET (spintronic field-effect transistor) has a source and a drain,
separated by a narrow semi conducting channel, the same as in a conventional FET.
In the spin FET, both the source and the drain are ferromagnetic. The source sends spin-
polarized electrons in to the channel, and this spin current flow easily if it reaches the drain
unaltered (top). A voltage applied to the gate electrode produces an electric field in the channel,
which causes the spins of fast-moving electrons to process, or rotate (bottom). The drain impedes
the spin current according to how far the spins have been rotated. Flipping spins in this way
takes much less energy and is much faster than the conventional FET process of pushing charges
out of the channel with a larger electric filed.
One advantage over regular transistors is that these spin states can be detected and altered
without necessarily requiring the application of an electric current. This allows for detection
hardware that are much smaller but even more sensitive than today's devices, which rely on
noisy amplifiers to detect the minute charges used on today's data storage devices. The potential
end result is devices that can store more data in less space and consume less power, using less
costly materials. The increased sensitivity of spin transistors is also being researched in creating
more sensitive automotive sensors, a move being encouraged by a push for more
environmentally-friendly vehicles.
A second advantage of a spin transistor is that the spin of an electron is semi-permanent and can
be used as means of creating cost-effective non volatile solid state storage that does not require
the constant application of current to sustain. It is one of the technologies being explored for
Magnetic Random Access Memory (MRAM)
Spin transistors are often used in computers for data processing. They can also be used to
produce a computer's random access memory and are being tested for use in magnetic RAM.
This memory is superfast and information stored on it is held in place after the computer is
powered off, much like a hard disk.
21. Quantum Computer
The development of classical computers is still making enormous progress and no end of that
seems to be in sight. More over, the design of Quantum Computers seems to be very
questionable and almost surely enormously expensive. All this is true, However, there are four
very good reason for exploring Quantum Computing as much as possible.
Quantum computing is a challenge . A very fundamental and natural challenge According to
our current knowledge, our physical world is fundamentally quantum mechanical. All
computers are physical devices and all real computations are physical processes.
Quantum computing seems to be very must and actually our destiny. As miniaturization of
computing devices continues , we are rapidly approaching the microscopic level, where the
laws of the quantum world dominates.
Quantum computing is the potential . There are already results convincingly demonstrating
that for some important practical problems quantum computers are theoretically
exponentially more powerful than classical computer.
Finally, the development of quantum computing is a drive and gives new impetus to explore
in more detail and new points of view concepts, potentials, laws and limitations of the
quantum world and to improve our knowledge of the natural world.
The study of information processing laws, limitations and potentials is nowadays in general a
powerful methodology to extend our knowledge, and this seems to be particularly true for
quantum mechanics i.e related spintronics. Several profound insights into the natural world have
already been obtained on this basis.
In a quantum computer, the fundamental unit of information (called a quantum bit or qubit), is
not binary but rather more quaternary in name. This qubit property arises as a direct consequence
of its adherence to the laws of quantum mechanics. A qubit can exist not only in a state
corresponding to the logical state 0 or 1 as in a classical bit, but also in states corresponding to a
blend or superposition of these classical states. In other words, a qubit can exist as a zero, a one
or simultaneously as both 0 and 1, with a numerical coefficient representing the probability for
each state. Each electron spin can represent a bit; for instance, a 1 for spin up and 0 for spin
down. With conventional computers, Engineers go to great lengths to ensure that bits remain in
stable, well-defined states. A quantum computer, in contrast, lies on encoding information within
quantum bits, or qubits, each of which can exist in a superposition of 0 and 1. By having a large
number of qubits in superposition of alternative states, a quantum computer intrinsically contains
a massive parallelism.
22. Unfortunately, in most physical systems, interactions with the surrounding environment rapidly
disrupt these superposition states. A typical disruption would effectively change a superposition
of 0 and 1 randomly into either a 0 or a 1, as process called decoherence. State-of-the-art qubits
based on the charge of electrons in a semiconductor remain coherent for a few picoseconds at
best and only at temperatures too low for practical applications. The rapid decoherence occurs
because the electric force between charges is strong and long range. In traditional semiconductor
devices, this strong interaction is beneficial, permitting delicate control of current flow with
small electronic fields. To quantum coherent devices, however, it is a disadvantage. As a result,
an experiment was conducted on the qubits, which are based on the electron-spin. Electron-spin
qubits interact only weakly with the environment surrounding them, principally through
magnetic fields that are non-uniform in space or changing in time. Such fields can be effectively
shielded.
The goal of the experiment was to create some of these coherent spin states in a semiconductor
to see how long they could survive. Much to the surprise, the optically excited spin states in
ZnSe remained coherent for several nanoseconds at low temperatures—1,000 times as long as
charge-based qubits. The states even survived for a few nanoseconds at room temperature.
Subsequent studies of electrons in gallium arsenide (GaAs) have shown that, under optimal
conditions, spin coherence in a semiconductor is possible
Spintronics Scanner
Cancer cells are the somatic cells which are grown into abnormal size. The Cancer cells have
different electromagnetic sample when compared to normal cells. For many types of Cancer, it is
easier to treat and cure the Cancer if it is found early. There are many different types of Cancer,
but most Cancers begin with abnormal cells growing out of control, forming a lump that's called
a tumour. The tumour can continue to grow until the Cancer begins to spread to other parts of the
body. If the tumour is found when it is still very small, curing the Cancer can be easy. However,
the longer the tumour goes unnoticed, the greater the chance that the Cancer has spread. This
makes treatment more difficult. Tumour developed in human body, is removed by performing a
surgery. Even if a single cell is present after the surgery, it would again develop into a tumour. In
order to prevent this, an efficient route for detecting the Cancer cells is required. Here, in this
paper, we introduce a new route for detecting the Cancer cells after a surgery. This accurate
detection of the existence of Cancer cells at the beginning stage itself entertains the prevention of
further development of the tumour.
23. This spintronics scanning technique is an efficient technique to detect cancer cells even when
they are less in number.
An innovative approach to detect the cancer cells with the help of Spintronics: The following
setup is used for the detection of cancer cells in a human body:
(a) Polarized electron source
(b) Spin detector
(c) Magnetic Field
Polarized electron source:
A beam of electrons is said to be polarized if their spins point, on average, in a specific direction.
There are several ways to employ spin on electrons and to control them. The requirement for this
paper is an electron beam with all its electrons polarized in a specific direction. The following
are the ways to meet the above said requirement: Photoemission from negative electron affinity
GaAs Chemi-ionization of optically pumped meta stable Helium An optically pumped electron
spin filter A Wein style injector in the electron source A spin filter is more efficient electron
polarizer which uses an ordinary electron source along with a gaseous layer of Rb. Free
electrons diffuse under the action of an electric field through Rb vapour that has been spin
polarized in optical pumping. Through spin exchange collisions with the Rb, the free electrons
become polarized and are extracted to form a beam. To reduce the emission of depolarizing
radiation, N2 is used to quench the excited Rb atoms during the optical pumping cycle.
Spin detectors:
There are many ways by which the spin of the electrons can be detected efficiently. The spin
polarization of the electron beam can be analyzed by using:
(a)Mott polar meter (b)Compton polar meter (c)Miller type polar meter
Typical Mott polar meters require electron energies of ~100 kV. But Mini Mott polar meter uses
energies of ~25 k eV, requiring a smaller overall design. The Mini Mott polar meter has three
major sections: the electron transport system, the target chamber, and the detectors. The first
section the electrons enter is the transport system. An Engel lens configuration was used here.
Two sets of four deflectors were used as the first and last lens. The electrons next enter the target
chamber. The chamber consists of a cylindrical target within a polished stainless steel
hemisphere. A common material used for the high-Z nuclei target is gold. Low-Z nuclei help
minimize unwanted scattering, so aluminium was chosen. Scattered electrons then exit the target
chamber and are collected in the detectors. Thus there are many methods for detecting the spin
polarization of electrons.
24. External Magnetic Field:
An external magnetic field is required during this experiment. The magnetic field is applied after
the surgery has undergone. First, it is applied to an unaffected part of the body and then to the
surgery undergone part of the body. It is already mentioned that the magnetic field could easily
alter the polarization of electrons.
This technique using spintronics is suggested by us to identify tumour cells after surgery. The
procedure for doing this experiment is as follows:
Optical Spin Filter:
After surgery and the removal of the tumour, the patient is exposed to a strong magnetic field.
Now the polarized electron beam is applied over the unaffected part and spin orientation of
electrons are determined using polar meter. Then the same polarized beam is targeted over the
affected part of the body and from the reflected beam, change in spin is determined. Based on
these two values of spin orientation, the presence of tumour cells can be detected even if they are
very few in number. Hence, we suggest this method for the detection purpose. A detailed view of
this innovative approach is given as follows.
Spin Orientation of the unaffected part of the body: Applying Magnetic Field:
When the magnetic field is applied to the unaffected part of the human body, the normal somatic
cells absorbs the magnetic energy and retains it.
Determining the Spin orientation: -When the electrons get incident on the cells the magnetic
energy absorbed by the cells alters the spin orientation of the electrons.
These electrons get reflected and it is detected by the Mott polar meter. Then the change in spin
orientation of the electrons is measured as Sx.
Spin Orientation of the surgery undergone part of the body: Applying Magnetic Filter:
In the surgery undergone part of the body an external magnetic field is applied. The cancer cells
which are present, if any, will absorb more magnetic energy than the normal cells since they
differ in their electromagnetic pattern.
Determining the spin Orientation:
Now an electron beam which is polarized is incident on the surgery undergone part of the body.
The magnetic energy absorbed by the cancer cell alter the spin orientation of the electron beam.
Since cancer cells absorb more magnetic energy, the change in orientation caused by them is also
more. If no cancer cells are present the amount of change is equal to the previous case. The change
in spin is measured by the polar meter as Sy.
25. Inference:
If the change in the spin in the unaffected part of the body is same as that of the surgery
undergone part, i.e.
If Sx=Sy Then,
There are no cancer cells in the surgery undergone part of the body and all the cells have been
removed by the surgery.
If the change in spin in the unaffected part is not equal to the change caused by the surgery
undergone part of the body, i.e.
If Sx not equals Sy Then,
There are some cancer cells in the surgery undergone part of the body and the cancer cells are
not completely removed by the surgery. The steps involved are:
1) The patient is exposed to a strong magnetic field so that his body cell gets magnetized.
2) A beam of electrons with polarized spin is introduced on the unaffected part of the body and
the change in spin is detected by a polar meter.
3) A beam of electrons with polarized spin is introduced on the part which had undergone
surgery. And the corresponding change in spin be Y
4) If X - Y = 0, it indicates that cancer cells have been removed from the body, if not it indicates
the presence of traces of cancer cells and it has to be treated again for ensuring complete
safety to the patient.
Thus this technique efficiently identifies the presence of cancer cells in that part of the body that
has undergone surgery to prevent any further development.
ADVANTAGES OF SPINTRONICS
As most of the spintronics devices/applications are on paper all the advantages are just defined
based on theoretical findings and they may have some dis-advantages which will/may be known
after they are fabricated and used. Some of the advantages of spintronics are:
The spin devices act as multi-functional units
Low power consumption.
Compact and Faster Devices
Larger storage capacity
26. The MRAM has all the properties of DRAM ,SRAM and ROM and hence single memory
chip can be used instead of three memory chips
Spintronics does not require unique and specialized semiconductors; can be implemented
or with common metals, such as Copper, Aluminium and Silver.
Since Spins don‟t change when power is turned off, the memory remains non-volatile.
Disadvantages of Spintronics
Controlling the spin for long distances
Silicon causes electrons to lose their spin state.
Major challenges are:.
Transport of spin polarized carriers across relevant length scales
Manipulation of both electron and nuclear spins on sufficiently fast time scales
Real Time Applications
The applications of spin devices and hence spintronics are vast since it provides many
advantages such as speed and size. . Some of the potential applications are:
Spin LED
Spin FET
MRAM
MRAM:-
The MRAM is the form of the RAM and is acronym for Magnetic Random Access Memory.
27. MRAM basically uses a spin device known as Magnetic Tunnel Junction. The property of
Tunnel magneto résistance [MTR] of the MTJ is used in MRAM. The relative change of MTR
can reach 70% at room temperature. The figure below shows the structure of the MTJ as well as
MRAM.
The MRAM is presently under development and is expected to reach similar densities and access
times as the current SRAM and DRAM, but their main advantages on these volatile
semiconductor- based memories is that they retain data even after losing power and hence to
helps to decrease the boot – up time of computers.
As shown in the figure each junction can store a bit of data. If the polarization of spin is in
parallel at both the layers, the resistance will be less and we say that a bit “0” is stored. And if
the spin polarization is anti – parallel then resistance is high and we say a bit “1” is stored. The
main advantage of MRAM is that it can attain a writing speed of 1000 times to that of the present
RAM’s.
SPIN FET:-
The figure above the structure and working of Spin FET. As shown the Source and Drain areas
are fabricated using Ferro-magnetic material and the channel is fabricated using the
semiconductor material. The additional gating effect is via the magnetic field.
The working of the spin FET is illustrated in the upper part of the figure. It illustrates the physics
of devices where both injection of spins into semiconductor and detection of spin information are
electrical. The ideal situation is when the spin lifetime is much longer than spent by the carriers
in semiconductor.
28. As shown a spin polarized current is then easily transmitted in the parallel configuration of
emitter and collector, whereas the anti-parallel one leads to spin accumulation and current
blockade.
SPIN LED:-
The figure above shows the structure of spin LED. The LED has a heterostructure as shown.
Spin – polarized electrons are injected from a paramagnetic DMS into a GaAs/AlGaAs LED,
which leads to emission of circularly polarized light. An injection efficiency of 90% spin
polarized current has been demonstrated with this structure.
Some other applications-
Laptop hard drives
4GB Compact Flash card
iPod nano
CONCLUSION AND FUTURE SCOPE
Conclusion:-
In this report we have seen the advantages of spintronics devices over the present electronic
devices. As said earlier this is the technology which will replace the present electronics era and
provides the advantages of speed, size, compactness so on. If the applications such as LED and
MRAM can be realized we can attain high efficiency of output in the case of LED and we can
attain high writing speed and reading efficiency in the case of MRAM.
29. Spintronics is one of the most exciting and challenging areas in nanotechnology, important to
both fundamental scientific research and industrial applications. These spintronics-devices,
combining the advantages of magnetic materials and semiconductors, are expected to be non-
volatile, versatile, fast and capable of simultaneous data storage and processing, while at the
same time consuming less energy.
They are playing an increasingly significant role in high-density data storage, microelectronics,
sensors, quantum computing and bio-medical applications, etc.
It is expected that the impact of spintronics to the microelectronics industry might be comparable
to the development of the transistor 50 years ago.
Though the area of spintronics has some drawbacks which will be realized when the spin devices
will be fabricated we may still avoid these drawbacks to large extent.
One drawback of this emerging technology is that since the spintronics is mainly based on the
magnetic properties of the material, the magnetic field of the earth may affect the magnetic field
inside the spin devices and cause errors. One main disadvantages of this is that the data stored in
a MRAM may be altered and hence can lead to errors.
Hopefully, this and many unknown effects will be found out and efforts are made to avoid such
effects and lead to more reliable, more functional, with greater speed of operation of spin devices
will be achieved.
Future Scope :-
Spintronics is still in its infancy and it‟s difficult to predict how it will evolve.
New physics is being discovered and new materials are being developed, such as magnetic
semiconductors
Several experiments have been carried out for progress in transporting spins over long distances
and in high electric fields that will probably prove successful in the near future.
Spintronics in INDIIA -
The technology wherein both the charge and spin of an electron is used to carry information has
generated excitement for its potential in a wide range of applications.
"The first applications of spintronics having been demonstrated, there is tremendous interest in
the development of the next spintronics device.
Spintronics biggest potential lies in embedded memories and non-volatile memory devices such
as magneto resistive random access memory (MRAM), which will revolutionize the memory
market.
30. Other applications include the use of spintronics in quantum computation and the development
of the quantum computer. Spin transistors are also could well challenge the monopoly of
semiconductor electronics.
Research in spintronics faces several challenges, especially handling-related issues. Because
spintronics devices use magnetism and materials such as nickel, iron, cobalt — with alloys not
commonly used in normal
semiconductor electronics — there are difficulties in etching and patterning as well as in
integrating the magnetic material into a silicon process for manufacturing MRAMs.
The behaviour of the magnetic element on a chip in both read and write modes could be quite a
hurdle it is required to make MRAMs reliable.
Today everyone already has a spintronics device on their desktop, as all modern computers use
the spin valve in order to read and write data on their hard drive. It was followed immediately by
the discovery of Tunnelling Magneto resistance (TMR) leading to the magnetic tunnel junction
that has been utilized for the next generation computer memory known as Magnetic Random
Access Memory (MRAM), another spintronics device for computers. Therefore, the initial
driving force for spintronics has been the improvement of computer technology. At present the
research has been concentrating on the fabrication of spin transistors and spin logics devices
integrating magnetic and semiconductors, with the aim of improving the existing capabilities of
electronic transistors and logics devices so that the future computation and thus the future
computer could become faster and consume less energy.
There are four main areas in spintronics:
1)Understanding the fundamental physics, such as spin-dependant transports across the
magnetic/ semiconductor interfaces and spin coherence length in semiconductors.
2) Synthesising suitable spintronics materials with Curie temperatures above room temperature,
large spin polarisation at the Fermi level and matching conductivity between the magnetic and
semiconductor materials.
3) Fabricating devices with nanometre feature sizes and developing new techniques for mass
production.
4) Integrating spin-devices with current microelectronics and computing.
31. REFERENCES
1) N Taniguchi, “On the basic concepts of Nano Technology” Proc. Intl conference prod
engage, Tokyo (Journal Paper)
2) www.physik.uni-regensburg.de/.../Spintronics
3) http://www.slideshare.net
4) Das Sarma, S., et al. 2000. Theoretical perspectives on spintronics and spin-polarized
transport. IEEE Transactions on Magnetics
Books:-
5) Rainer Wiser (2nd edition), “Nano electronics and information technology - Advanced
electronic materials & devices”
6) Electronic measurement and control of spin transport (Technical Publication)
.