This slide is made with animation.If u want to see this slide with it's original view, plz download this slide.This slide is made by using animation. so,download it and enjoy this slide

1. Welcome To
My
Presentation

2. Presentation
On
Seam

3. Prepared By
MD. ABDUR RAIHAN KHONDOKER
ID: 121-23-2952
Daffodil International University
Email: Shobujnew@gmail.com

4. What Is Seam????
A Line Along Which Two Or More
Fabrics Are Joined By Fusion,
Glueing, Sewing, Stapling Or
Alternative Method Is Termed As
Seam.

5. Factors of seam properties:
Seam type.
Stitch type.
Needle size & type.
Thread size & type.
Feed mechanism at sewing M/C

6. Seam
Type

7. Seam type:
There are 8 types of seam. They are,
1. Seam class-1 ( Superimposed seam
).
2. Seam class-2 ( Lapped Seam ).
3. Seam class-3 ( Bound Seam ).
4. Seam class-4 ( Flat Seam ).
5. Seam class-5 ( Decorative Seam ).
6. Seam class-6 ( Edge Neatening ).
7. Seam class-7.
8. Seam class-8.

8. 1. Seam class-1 (Superimposed
seam):
Figure: Super Imposed Seam
This type of seam is formed by correctly placing
the ends of the fabric on the other ends of the
fabric & sewn.

9. Location of needle
penetration of passage:
1.01.01
1.01.02
1.01.03
1.01.04

10. Seam class-2 ( Lapped Seam ):
Simplest seam is formed by lapping of the pieces of
fabric.
The seam end of the fabric are in opposite direction &
overlapping one end on other which is shown in the
figure.
Figure: Lapped Seam.

11. Location of needle
penetration of passage:

12. Seam class-3 ( Bound Seam
):Here one edge of the fabric is bound by the other
fabric
Figure: Bound Seam

13. Location of needle
penetration of passage:

14. Seam class-4 ( Flat Seam ):
Two pieces of fabric are laid flat with their edges closing each other
without overlapping.
Seam are produced with minimum of two pieces of component.
Both components are limited on one end but they are put
opposition to each other on the same level
Figure: Flat Seam

15. Location of needle
penetration of passage:

16. Seam class-5 ( Decorative Seam
):This type of seam is made by making one or more
adjacent stitch lines in one or more layer of fabric.
Figure: Decorative Seam

17. Location of needle
penetration of passage:

18. Seam class-6 ( Edge
Neatening ):This type seam is used to bind the edge of fabric, so that
thread can not be drawn off.
Figure: Edge Neatening

19. Location of needle
penetration of passage:

20. Seam class-7:
A narrow piece is sewn to the edge of a garment part.
Seams are produced with minimum of two pieces of
component. One component is limited on one end, and the
other narrow one is limited on both ends.
Figure: Seam Class-7

21. Location of needle
penetration of passage:

22. Seam class-8:
Mainly one piece of fabric is used.
The Edge of the fabric is sewn by folding in various
ways.
Belt & belt loops are made by this seam.
Figure: Seam Class- 8

23. Location of needle
penetration of passage:

24. Any
Question
???

25. Thank
U