Learn more about SCADA expert ClearSCADA:
- Simplicity & Enhanced User Experience for faster deployment and improved time-to-market
- Reduced Maintenance Efforts for protection of investment
- Enhanced Security capability for better protection of the system
- Enhanced Operational Intelligence to help optimize operations and maintenance activities
- Integrated with the complete Schneider Electric Telemetry portfolio
Wide area monitoring systems (WAMS) are essentially based on the new data acquisition technology of phasor measurement and allow monitoring transmission system conditions over large areas in view of detecting and further counteracting grid instabilities.
SCADA (Supervisory Control and Data Acquisition):
This presentation introduces SCADA, a system used to monitor and control industrial processes. It covers the fundamental concepts of SCADA, including its components, architecture, communication protocols, and applications across various industries.
Wide area monitoring systems (WAMS) are essentially based on the new data acquisition technology of phasor measurement and allow monitoring transmission system conditions over large areas in view of detecting and further counteracting grid instabilities.
SCADA (Supervisory Control and Data Acquisition):
This presentation introduces SCADA, a system used to monitor and control industrial processes. It covers the fundamental concepts of SCADA, including its components, architecture, communication protocols, and applications across various industries.
AUTOMATION ,SCADA AND POWER SYSTEM AUTOMATIONkamal soni
AUTOMATION ,SCADA AND POWER SYSTEM AUTOMATION
PLC(PROGRAMMABLE LOGIC CONTROLLER)
PLC OPERATION
Block diagram of a PLC
Supervisory
Control
And
Data
Acquisition
Human Machine Interface
Intelligent Electronic Device
Instrument Transformers
This project presents a new strategy for load shedding with the aim of providing the consumers with the benefit of using high priority loads of their choice, even when load shedding is done.
A simple low cost bidirectional Power Line Communication (PLC) system is utilized to control and monitor the loads of consumer.
In all these systems, the power flow of electrical energy takes place through Electrical Substations. An Electrical Substation is an assemblage of electrical components including busbars, switchgear, power transformers, auxiliaries, etc. Basically an electrical substation consists of a number of incoming circuits and outgoing circuits connected to common busbar system. Busbars are conducting bars to which a number of incoming or outgoing circuits are connected. Each circuit has certain electrical components such as circuit-breakers, isolators, earthing switches, current transformers, voltage transformers, etc. These components are connected in a definite sequence such that a circuit can be switched off/on during normal operation by manual/remote command and also automatically during abnormal conditions such as short-circuits. A substation receives electrical power from generating station via incoming transmission lines and delivers electrical power via the outgoing transmission lines. Substations
"Automatic Intelligent Plant Irrigation System using Arduino and GSM board"Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
Smart Meter's are a part of Smart Grid,which display the consumption of electricity to end use customer as well as communicate to the utility side for demand side management.
IR BASED HOME AUTOMATION USING ARDUINO UNOMln Phaneendra
In this work, a remote controlled device is used to control 1 - 6 different single phase loads like Fans, Tube Lights and etc.,
This Automation can be operated up to a 30 feet of distance . Our work is based on Infra-Red(IR) technology and a simple Arduino Board(AB) using Printed Circuit Board(PCB).
The new designed circuit is more advantageous as it is portable, easy to carry and use.
AUTOMATION ,SCADA AND POWER SYSTEM AUTOMATIONkamal soni
AUTOMATION ,SCADA AND POWER SYSTEM AUTOMATION
PLC(PROGRAMMABLE LOGIC CONTROLLER)
PLC OPERATION
Block diagram of a PLC
Supervisory
Control
And
Data
Acquisition
Human Machine Interface
Intelligent Electronic Device
Instrument Transformers
This project presents a new strategy for load shedding with the aim of providing the consumers with the benefit of using high priority loads of their choice, even when load shedding is done.
A simple low cost bidirectional Power Line Communication (PLC) system is utilized to control and monitor the loads of consumer.
In all these systems, the power flow of electrical energy takes place through Electrical Substations. An Electrical Substation is an assemblage of electrical components including busbars, switchgear, power transformers, auxiliaries, etc. Basically an electrical substation consists of a number of incoming circuits and outgoing circuits connected to common busbar system. Busbars are conducting bars to which a number of incoming or outgoing circuits are connected. Each circuit has certain electrical components such as circuit-breakers, isolators, earthing switches, current transformers, voltage transformers, etc. These components are connected in a definite sequence such that a circuit can be switched off/on during normal operation by manual/remote command and also automatically during abnormal conditions such as short-circuits. A substation receives electrical power from generating station via incoming transmission lines and delivers electrical power via the outgoing transmission lines. Substations
"Automatic Intelligent Plant Irrigation System using Arduino and GSM board"Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
Smart Meter's are a part of Smart Grid,which display the consumption of electricity to end use customer as well as communicate to the utility side for demand side management.
IR BASED HOME AUTOMATION USING ARDUINO UNOMln Phaneendra
In this work, a remote controlled device is used to control 1 - 6 different single phase loads like Fans, Tube Lights and etc.,
This Automation can be operated up to a 30 feet of distance . Our work is based on Infra-Red(IR) technology and a simple Arduino Board(AB) using Printed Circuit Board(PCB).
The new designed circuit is more advantageous as it is portable, easy to carry and use.
PlantStruxure is Schneider Electric’s collaborative and integrated automation architecture for industrial and infrastructure customers. It brings together our Telemetry, PLC/SCADA and DCS offerings with complete lifecycle services to help make your operations more efficient. From initial design to modernization, PlantStruxure transparently connects control, operation and enterprise levels of your business.
Review Schneider Electric’s innovative and efficient upstream oil and gas offer and how to optimize remote assets. Benefit from industry expertise and live demonstrations that highlight reducing total cost of ownership and turning data into reliable information to drive business.
BlackHat Arsenal 2014 - C-SCAD : Assessing Security Flaws in C-SCAD WebX Clie...Aditya K Sood
C-SCAD is an information gathering and penetration testing tool written to assess the security issues present in the Web-X (Internet Explorer-based web interface) client used to interact with the ClearSCADA server. WebX client is hosted on the embedded web server which is shipped as a part of complete ClearSCADA architecture. Primarily, the WebX client is restricted to perform any configuration changes but it can reveal potential information about the ClearSCADA server and associated components. Insecure deployments of WebX client can reveal potential information about the various functions such as alarm pages, SQL lists, and diagnostic checks including various reports.
A key part of implementing Volt-VAR control and optimization is to identify the benefits that can be attributed to VVO. The major challenge is to separate the impacts of VVO (i.e. the VVO benefits) from the impacts of factors not related to VVO, such as changing weather conditions, random customer behavior and routine operational changes (planned switching). Utilities on the panel have performed VVO measurement and verification using different methods. Each presenter will describe how the method works, data requirements, strengths and weaknesses of the approach and results. The session also will summarize work by the IEEE Volt-VAR task force to develop IEEE Guideline P1885 M&V of VVO projects for electric distribution utilities.
(http://www.advantechindia.in) We are a renowned name engaged in manufacturing, trading and supplying a comprehensive array of Multiple Input Output Extension Module, Programmable Automation Controller, Micro Computer, Server & Workstation, Mobile Data Terminal, Drive & Storage Device, Computer Cables & Connector, etc. The offered range of products is accurately designed by our highly skilled personnel according to the latest technological advancements by making use of top-notch quality raw material & sophisticated technology following the set industry parameters.
The traditional plywood manufacturing process usually requires a large amount of manpower and produces a significant amount of waste material. Then there is the question of safety hazards associated with manually operated machines. Therefore, manufacturers are always looking for ideas that reduce dependency on manpower, improve efficiency and boost overall productivity.
Our client was no different. They approached Messung for a cost-effective solution to control their plywood processing plant.
At Schneider Electric, in the IT Division, our core business has always been focused on delivering the highest level of availability to critical technologies, systems and processes. We’ve done this through our award winning, industry-leading and highest quality products and solutions, including UPS, Cooling, Rack Systems, DCIM and Services.
In this new digital era, we see a world that is always-on.
Always on to meet the needs of the highest notion of “access” to goods and services
Always on to be the solid, reliable foundation of digital transformation for businesses
Our mission is: To empower the digital transformation of our customers by ensuring their critical network, systems and processes are highly available and resilient.
Design and Experiment Platform for Industrial Wireless SystemsRyan
Cite This Work: Peng Hu. "Design and Experiment Platform for Industrial Wireless Systems", The 10th Annual UNENE I&C Workshop, Toronto, Canada, Oct. 24th, 2014.
This presentation introduces an experiment platform for industrial wireless systems done by CMC in collaboration with Western University.
In this session you will learn:
SCADA – An Overview
For more information, visit: https://www.mindsmapped.com/courses/industrial-automation/complete-training-on-industrial-automation-for-beginners/
The new Modicon M580 is the first ePAC with Ethernet built right into its core. M580 is the controller of choice for Schneider Electric’s collaborative and integrated automation architecture, PlantStruxure.
SCADA Mining ® is an online data processing platform improving the performance monitoring of renewable energy farms without any remote sensor. The high processing capacity of the software allow the user to analyse and interpret massive data.
SCADA Mining ® allows to detect underperformances, anomalies and deviations of your assets in just a few minutes via an user friendly online platform.
Addressing utility challenges with MV/LV Monitoring and Control SolutionLandis+Gyr
Introducing grid digitalization solutions
Designed to retrofit and digitalize your existing power distribution infrastructure in a cost-effective way, the modular MV/LV Monitoring and Control Solution enables your utility to improve business operations, network efficiency and quality of service.
The solution is realized through retrofitting sensors onto the existing medium and low voltage power cables, transformers and switch gear, and through the integration of already installed electric devices located at the substation level.
More Electric:
Our world is becoming More Electric. Almost everything we interact with today is either already electric or becoming electric. Think about it. From the time you start your day in the morning to the time you finish your day – your home, your car, your work, your devices, your entertainment – almost everything is electric. Imagine the energy needed to power this. Electricity consumption will increase by 80% in next 25 years
More Connected: Our lives are also becoming more connected. The Internet has already transformed the way we live, work and play. Now the Connected Things is going to take this to a brand new level. 50 billion things connected in the next 5 years.
More Distributed: With such a widespread electrification and connectivity, energy models need rethinking as well. Which is why the generation of power needs to be closer to users. Distributed Energy is rapidly evolving globally. This is positive energy – renewable. In 2014 , Renewables overtook fossil fuels in investment value, with $295bn invested in renewables compared to $289bn invested in fossil fuels. And it is getting cheaper to do this.
More Efficient: When our world is more electric, more connected and more distributed, new opportunities emerge and allows us to tap into even more efficiency – in industrial processes, in the energy value chain, in buildings, in transportation, in the global supply chain and even in the comfort and peace-of-mind of our homes.
With more than $18 billion in M&A activity in the first half of last year alone, the colocation industry is riding the bubble of rapid growth. Colocation data center providers are being evaluated by a wide range of investors, with varying experience and perspectives. Understanding the evaluation criteria is a critical competency for attracting the right type of investor and financial commitment for your colocation business and this is why we have invited today’s speaker to present.
Steve Wallage Steve Wallage is Managing Director of BroadGroup Consulting. Steve brings 25 years of industry experience, holding senior roles at Gartner Group, IDC, CGI and IBM before joining BroadGroup 10 years ago. In his responsibilities at BroadGroup Steve has led many due diligence projects for investors evaluating colocation companies.
In this briefing we explore the Phaseo power supplies and transformers offer presentation and application samples.
For more details:
Industrial%20Automation%20and%20Control&parent-category-id=4500&parent-subcategory-id=4510
We’ve all been hearing about how robust the market for data center space is, but a presentation by an investment banker who has his finger on the pulse on the market day in and day out gave me a new appreciation for how great the opportunity really is.
Herb May is a partner and managing director with DH Capital, an investment bank founded 15 years ago in New York that is focused on the Internet infrastructure space. His company has been involved in close to 100 deals, representing almost $20 billion in value. Most of DH Capital’s work is as a mergers and acquisitions advisor, but raising capital is a growing percentage of its business. The point is, the company understands the financials behind data centers and colocation companies inside and out.
In this briefing we explore the Magelis Basic HMI offer presentation and application samples.
For more details:
https://www.schneider-electric.com/en/product-range/61054-magelis#search
In this briefing, we explore the Zelio time relay offer presentation and application samples.
For more details:
http://www.schneider-electric.com/en/product-range/529-zelio-time?parent-category-id=2800&parent-subcategory-id=2810&filter=business-1-industrial-automation-and-control
Spacial, Thalassa, ClimaSys Universal enclosures BriefingSchneider Electric
Discover more about Universal Enclosures and how to select the one you need.
For more information:
http://www.schneider-electric.com/en/product-category/5800-enclosures-and-accessories/?filter=business-1-industrial-automation-and-control
Learn more about "what is a solid state relay", key features and targeted applications.
For more details:
http://www.schneider-electric.com/en/product-range/60278-zelio-relays?parent-category-id=2800&filter=business-1-Industrial%20Automation%20and%20Control
Learn more about what an HMI does and the main components and a look at a typical HMI.
Further details:
http://www.schneider-electric.com/en/product-category/2100-HMI%20(Terminals%20and%20Industrial%20PC)?filter=business-1-Industrial%20Automation%20and%20Control
Where will the next 80% improvement in data center performance come from?Schneider Electric
Rick Puskar, Head of Marketing for Schneider Electric's IT Division presents at the Gartner Symposium in Barcelona November 8th, 2017. In this presentation Rick discusses where the next 80% improvement in data center performance will come from with a focus on the speed, availability and reliability of data. Learn how a cloud-based data center infrastructure management as a service architecture like Schneider Electric's EcoStruxure IT can drive such aggressive goals around data center performance.
Learn how EcoStruxure is digitizing industry with IIoT to increase end-to-end operational efficiency with more dynamic control for better business results.
Learn more about our System Integrator Alliance Program - A global partnership transforming industry and infrastructure by helping them make the most of their processes, the most of their assets and the most of their energy.
EcoStruxure, IIoT-enabled architecture, delivering value in key segments.Schneider Electric
As presented during the Alliance 2017 event, learn how to deliver integrated solutions based on EcoStruxure, our IIoT-enabled architecture for Wastewater, Food and Beverage and Mining, Minerals and Metals.
A Practical Guide to Ensuring Business Continuity and High Performance in Hea...Schneider Electric
Within healthcare facilities, high availability of systems is a key influencer of revenue and patient safety and satisfaction. Three important critical success factors need to be addressed in order to achieve safety and availability goals. These include exceeding the facility’s level of regulatory compliance, a linking of business benefits to the maintenance of a safe and an “always on” power and ventilation environment, and a sensible approach to technology upgrades that includes new strategies for “selling” technological improvements to executives. This reference guide offers recommendations for identifying and addressing each of these issues.
Connected Services Study – Facility Managers Respond to IoTSchneider Electric
According to a new 2017 study commissioned by Schneider Electric, facility managers are increasingly looking to leverage the Internet of Things (IoT) by implementing new digital technologies like intelligent analytics to improve maintenance decisions and operations. Explore the full results on how facility managers are reacting to IoT when it comes to facility maintenance.
Learn more about cabling and accessories and the complete ranges available featuring 3 types of cable to suit the envirionment. For more details: http://www.schneider-electric.com/en/product-subcategory/88035-cordset-and-connectors/?filter=business-1-industrial-automation-and-control&parent-category-id=4900
This briefing will look at the general purpose of Photoelectric sensors and Photoelectric fork and frame sensors. For more details: http://www.tesensors.com/global/en/product/photoelectric/xu/?filter=business-1-automation-and-control&parent-category-id=4900/
A world-class global brand offering a comprehensive line of Limit Switches complying with international standards: IEC, UL, CSA, CCC, GOST. For more details: http://www.tesensors.com/global/en/product/limit-switches/xc-standard/?cat_id=BU_AUT_520_L4&conf=sensors&el_typ=node&nod_id=0000000002&prev_nod_id=0000000001&scp_id=Z000
Explore the full range of adjustable electromechanical pressure switches. For more details: http://www.tesensors.com/global/en/product/pressure-level-control/xm/?filter=business-1-automation-and-control&parent-category-id=4900
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
2. Schneider Electric 2| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
PlantStruxure™ is Schneider Electric’s collaborative and integrated automation architecture for industrial and infrastructure customers.
It brings together our Telemetry, PLC/SCADA and DCS offerings with complete lifecycle services to help make your operations more efficient.
From initial design to modernization, PlantStruxure transparently connects control, operation and enterprise levels of your business.
Telemetry – one of the pillars of
3. Schneider Electric 3| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
• SCADAPack (Modbus-centric) with Flow Measurement capabilities for
Oil & Gas applications
• SCADAPack E (DNP3/IEC60870-centric) for Water Waste Water
applications
• SCADAPack data loggers
• Licensed/license-free radios for serial and Ethernet communication
• Support for Modbus, DNP3, IEC60870-5-101/104 protocols
• Optimized to manage large number of remote assets in critical
Infrastructures (Water Waste Water, Oil & Gas, Electrical Utilities, Renewable)
• Integrated scalable SCADA with ready to use telemetry features
• Open for easy connection to business and IT systems
Business System
SCADA Expert ClearSCADA
Efficient management of remote assets
Trio Data Radios
Bringing versatility and reliability to your wireless network
SCADAPack RTU
Compact, versatile controller for telemetry and remote SCADA solutions
Accutech Wireless Instrumentation
Rapid deploy Self-Powered Wireless Instrumentation
• Widest range of battery-powered instruments
• Available globally in license-free frequency bands 2.4Ghz and 900 MHz
Telemetry
ControlOperationEnterprise
4. Schneider Electric 4| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Release Summary
Simplicity & Enhanced User Experience for faster deployment
and improved time-to-market
Reduced Maintenance Efforts for protection of investment
Enhanced Security capability for better protection of the system
Enhanced Operational Intelligence to help optimize operations
and maintenance activities
Integrated with the complete Schneider Electric Telemetry portfolio
5. Simplicity & Enhanced User Experience
for faster deployment and improved time-
to-market
SCADA Expert ClearSCADA 2014 R1
6. Schneider Electric 6| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
New & Improved User Interface
●Improved functionality and increased efficiency
● Toolbar replaced with Ribbon
● Tabbed multi-document interface
● Color-coded tabs for Inset Windows
● Adjustable drag-and-drop ‘snapped’ window layout
● User-customizable Quick-Access Toolbar for frequent functions
● Recent document history
● Redesigned multi-monitor interface
● Support for 16 monitors!
● Refreshed icons, compatible with color-blindness
● Asynchronous communications for improved performance
●Foundation for continued & enhanced graphics development
7. Schneider Electric 7| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
New & Improved User Interface
8. Schneider Electric 8| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Simplified Development
●Simplified Internal Point Calculations
● Removes the complexity of logic for simple calculations or internal data
transfer
● Familiar syntax and interface for existing ClearSCADA users
● E.g. (“Well Site A.Level” + “Well Site B.Level”) / 2
●Bulk Edit Tool
● External tool that interfaces with ClearSCADA to provide bulk modification
● Uses MS Excel for implementation of bulk changes
● Filtering can be applied prior to export to limit dataset
● Bulk quick-edits can be performed directly without exporting/importing
● Also allows for quick and simplified editing of template Property
Overrides
10. Schneider Electric 10| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Automated Data Visualization
●Data Set / Data Set Row
● Data collection that includes support for templates, providing automated
expansion as new instances are created
● Individual rows included in templates, added to data set automatically
● Reduced maintenance effort for data visualization and reporting
● Applications include simplified management of site summary information:
● Row included in site template; references pressure, flow, tank level,
pump status etc. Each new site gets automatically added to site
summary information table.
● Summary data also available for simplified reporting and/or data export
12. Schneider Electric 12| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Protect Sensitive System Information
●Improved support for Firewalls and Network Address Translation (NAT)
● Enabled configuration of drivers (browsing for remote tags or devices)
through firewall
● Extended WebX compatibility with NAT
● WebX server address can be ‘hidden’ from
users behind network address translation
●Restrict sensitive IP address information to only privileged users
● Visibility of all system IP address and user logon failures available to
privileged users only
● Increased overall system security
13. Schneider Electric 13| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Deployed In-Depth Security Testing
●Vulnerability Scanning & Management Solutions
● Nessus
● OpenVAS
● NeXpose
● W3af
●Network Discovery & Security Auditing
● Nmap
● Zenmap
●Penetration Testing
● HPWebInspect
15. Schneider Electric 15| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
3D Plotting
●XYZ Plot
● A new 3D plot which displays [time, value] relationship for multiple points
(points displayed as different x-axis locations on the plot)
● Provides enhanced visualization
and operation of pressure/flow
profile in pipeline or water
distribution applications
● Consistent ‘structure’ of the
curve and immediate historic
comparison allows simpler
detection of abnormal conditions
X-Axis (point)
Y-Axis
(value)
Z-Axis (time)
X-Axis (point)
Y-Axis
(value)
Z-Axis (time)
16. Schneider Electric 16| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Integrated Hydraulic Modeling UI
●Integration of Aquis; Schneider Electric’s Hydraulic Modeling tool which
simulates the flow and pressure in a water distribution network
● Aquis uses real-time data to analyze and track the current situation enabling
operators to make better and smarter decisions and to optimize production
and enhance the bottom line
●Operators will be able to interact with the
hydraulic model from within ClearSCADA
● Aquis User Interface available in ClearSCADA
● Seamless transition between SCADA data and
simulations from Aquis
● Gather information from Aquis and perform
immediate analysis
17. Schneider Electric 17| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Closer PLC Integration
●Updated Schneider Electric OPC Factory Server (OFS) to V3.50
● Simpler to use than previous versions
● Increased performance
● Access to PLC diagnostic information
●Advanced OPC Driver
● Support for OPC DA 3.0
● Automatic detection of OPC DA version
● Time-stamping of data from OPC Servers
● N-level redundancy, automatic failover
18. Schneider Electric 18| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Connectivity Enhancements
●Continued close integration with Telemetry Field Devices
● SCADAPack530/535E Smart RTU
● SCADAPack50 Data Logger
● Trio Radios via SNMP
● T-Box RTU
● Supports full range of T-Box RTUs via TComm protocol
●WITS V1.3 (Water Industry Telemetry Standard – UK)
● Continued focus on W/WW in UK (+ Australia) by enhancing support to V1.3
● Enhancements to time profiles, configuration upload/download, and error
codes
19. Schneider Electric 19| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
ClearSCADA is fully integrated with the entire Telemetry Offer:
●SCADAPack E Smart RTUs
● Manage RTU entirely from ClearSCADA
● Remote download of configuration & logic
● Remote firmware upgrade
● Receive detailed diagnostic information
● Communications Statistics
● RTU Alarms (buffer full, firmware upgrade, clock sync, etc)
● Serial Number & Firmware Version
● Logic Program Version & Run Status
● Clock Synchronisation
● DNP3 Secure Authentication
●Integration with Accutech Wireless Instruments
Integrated Telemetry Offer : SCADAPack E
20. Schneider Electric 20| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
ClearSCADA is fully integrated with the entire Telemetry Offer:
●Trio Data Radios
● Retrieve diagnostic information remotely
● Supply Voltage
● Temperature
● Transmit Power
● RSSI
● VSWR
● Receive immediate notification of alarms (via SNMP)
● Power Supply
● Temperature
● RSSI
● Synchronisation Status
Integrated Telemetry Offer : Trio Data Radio
21. Schneider Electric 21| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
ClearSCADA is fully integrated with the entire Telemetry Offer:
●SCADAPack 50 Wireless Data Logger
● Manage configuration
● Download configuration changes
● Retrieve detailed communications statistics
● Receive device alarms
● Low Battery
● Communications
● Download Configuration, etc
● Retrieve device diagnostics
● Radio Level
● Battery Level
● Software Version
● SMS Sent/Received OK, etc
Integrated Telemetry Offer : SCADAPack 50
22. Schneider Electric 22| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Bridging IT and OT
●SNMP V3
● Extension of existing SNMP v1 implementation:
● Asynchronous notification functionality (traps and informs)
● New security model providing privacy of data via encryption
● Simplified development
● More efficient communications
● Enhanced diagnostic collection from Trio Radios
● Standard diagnostic monitoring (RSSI, DC Voltage, Temperature, etc),
plus receipt of notifications (traps / informs) from Radios
● Supports new Q-series and existing J-Series and Ethernet E-Series
models running updated firmware
23. Schneider Electric 23| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Tiered Architecture Communications
●EcoStruxure Web Services (EWS) provides simplified interoperability
between tiered installations of ClearSCADA, providing transfer of:
● Analog Points (Current and Historic Data)
● Digital Points (Current and Historic Data)
● Time Points (Current and Historic Data)
● String Points (Current Data only)
Tier 2
Central Server
Remote
Server
●Simplified configuration compared with
existing DNP3, IEC60870 or Modbus
Slave implementation
●Support for ClearSCADA Server
Redundancy
25. Schneider Electric 25| End User Business Group - Industry Business | Plant Solutions | Telemetry & Remote SCADA Solutions | Brad Shaw – February 2014
Release Summary
Simplicity & Enhanced User Experience for faster deployment
and improved time-to-market
Reduced Maintenance Efforts for protection of investment
Enhanced Security capability for better protection of the system
Enhanced Operational Intelligence to help optimize operations
and maintenance activities
Integrated with the complete Schneider Electric Telemetry portfolio