Senior Electrical Engineer (Houston)

1. SARVOTTAM (SAM) K. MEHTA, PE
11555 Bissonnet
Houston, TX 77099
817-800-3356 (Cell)
E-mail: smehta2005@gmail.com
EDUCATION:
• MSEE, Birla Institute of Technology & Science
Concentration: Power and Control Systems
• BSEE, Indian Institute of Science
Concentration: Power and Control Systems
• BS Physics, Gujarat University
Concentration: Physics and Math
LICENSES: Professional Engineer in Texas and Michigan
SPECIAL CAPABILITIES:
EMPLOYERS:
Twenty plus years of electrical engineering experience in Oil & Gas, Power plants,
Telecommunications, water and Waste water plants, residential and commercial buildings
(MEP). Electrical engineering experience in supervisory, project management positions.
Experience encompasses power distribution (Low, Medium and High voltage),
substations, lighting, grounding, fire protection, protective relaying, calculations (Voltage
drop, cable & circuit breakers sizing, load flow, short circuit, motor starting ) using SKM
and ETAP software programming.
11/22/14- Present Worley Parsons
Senior Supervising Electrical Engineer
Worked on BASF West End Substation and Ammonia Terminal substation. Prepared
Scope of Work, specificaions, data sheets, one lines, layout drawings for substations and
prepared Purchase Order for major electrical equipment and Power and Control building.
Prepared man-hours estimate, project schedule, coordinated with different disciplines,
contract negotiation with vendors.
5/2014-10/2014 Technip USA
Senior Electrical Engineer
Worked on BP’s Juniper Topside platform. Responsible for Electrical Instrumentation
and Telecommunications building procurement. Prepared one lines, electrical equipment
list, etc for EIT building.

2. Resume of Sarvottam K. Mehta
Page 2 of 6
4/2013- 5/2014 AMEC Oil and Gas
Senior (Lead) Electrical Engineer
Worked on Petrobras’s Green Turtle FPSO FEED. Prepared One Lines, electrical
datasheets for HV and LV control gears, Emergency Generator, cable sizing and cable
schedule.
Worked on BHP Well Pad reconfiguration project. Provided solar power to skid
instrumentation.
Worked on FEED for Anardako’s Central Processing Facility in Algeria- Added spare
re-injection compressor.
Worked on Chenerie Energy’s Ethane Export (LNG) pre feed project. Prepared
conceptual One lines for 138KV, 5KV, 480V. Also, prepared electrical major equipment
specifications, cable schedules, electrical load list, etc.
Prepared man-hours estimate, project schedule, coordinated with different disciplines,
contract negotiation with vendors.
3/2012 –4/2013 Worley Parsons
Senior Supervising Electrical Engineer
Worked on BP’s Gulf of Mexico, brown field project- seven platforms modifications.
Revising one lines, wiring and schematic diagrams, cable and conduit plans, cable and
conduit schedules, lighting and grounding plans, load flow analysis, etc.
02/2010 – 3/2012 AMEC/Paragon
Principal/Lead Electrical Engineer
Worked on Chevron’s Gas Plant in Angola project. Prepared One lines, schematics, area
classification drawings. Prepared Electrical equipment load study, 5KV and 480V Cable
schedules, cable tray MTO. Prepared Material Requisitions for Quote and Purchase.
08/2009 – 12/2009 SOFEC Corporation
Title: Principal Electrical Engineer
As a Lead engineer, I provided technical direction to engineers and designers. I worked
on FEED project for FPSO (Floating Production, Storage and Offloading) vessel

3. Resume of Sarvottam K. Mehta
Page 3 of 6
electrical power distribution. Prepared electrical specifications, One Line diagrams,
electrical load list, electrical calculations, etc.
01/2007- 07/2009 Worley Parsons
Title: Principal Electrical Engineer
As a lead engineer, I led a group of 3 engineers and 2 designers. I provided technical
direction as well as performed man hour estimate and discipline schedules. I worked on
pre-feed Chemaweyaat Complex 1, Abu Dhabi project.
Offshore, Sub-Sea Project (hydrocarbons):
Prepared One Lines for 11KV and 480V switchgears and MCCs, electrical room layout
drawings, load analysis, electrical equipment list, Load Flow and Motor Starting Study,
Short Circuit Study, sub-sea cable schedules, load shedding, power generation, area
classification, MTO’s for Field Maintenance Vessel for sub-sea operations.
Offshore, Hull Project (hydrocarbons):
Prepared One lines for 4160V and 480V switchgears and MCCs, electrical
equipment list, sub-sea cable schedules, motor load list, power generation, load flow and
motor starting study, short circuit study, load shedding for ATP Mirage field MinDOC 3
sub-sea project.
Offshore Topside Project (hydrocarbons):
Worked on Loran/Manatee Offshore Development PRE FEED project for Chevron.
Developed electrical equipment (motor) list, one lines and area classification drawings.
Also, prepared power generation study, load flow and motor starting study and short
circuit study using ETAP. Complied with ABS coast guard regulations.
Onshore Project (hydrocarbons):
Performed Pre Feed for Petrobras project in Brazil. Developed one lines, specifications,
substations drawings, data sheets for major electrical equipment.
Performed FEED for NCP (National Chevron Phillips) project in Saudi Arabia.
Developed One lines, electrical specifications for major electrical equipment, electrical
motor load list, electrical equipment data sheets.
Worked on the engineering and design for the FEED package for North American Oil
Sands Corporation (NAOSC) in Canada. Preparing medium and low voltage power
distribution systems, one line diagrams, specifications for major electrical equipment

4. Resume of Sarvottam K. Mehta
Page 4 of 6
such as switchgear, MCC, power transformers, motors, cables, UPS, batteries, etc. Also,
preparing motor load list and datasheets.
Pipeline Project (hydrocarbons):
Worked on Plains- Patoka and St. James pipeline project. Also worked on Centurion pipe
line project. Developed electrical equipment specs, design criteria, one lines, major
electrical equipment datasheets.
Prepared medium and low voltage power distribution systems, One Line diagrams,
Specifications for major electrical equipment such as switchgear, MCC, power
transformers, motors, cables, UPS, Batteries, etc. Also, prepared motor load list and
datasheets
Prepared man-hours estimate, project schedule, coordinated with different disciplines,
contract negotiation with vendors.
04/2006- 01/2007 Aker-Kvaerner
Title: Principal Electrical Engineer
As a Group Lead, I led a group of 2 engineers and 1 designer. I Worked on the detailed
engineering of the ExxonMobil Adriatic LNG gas (hydrocarbons) terminal to be
constructed in Italy.
Worked on the engineering and design for the FEED package for ExxonMobil Chemical
Singapore Parallel Train Project for two new Ployethylene lines, common extrusion and
pallet handling, packaging, shipping and utilities. Complied with coastguard regulations.
Prepared medium and low voltage power distribution systems One Line diagrams,
Specifications for major electrical equipment such as switchgear, MCC, power
transformers, motors, cables, UPS, Batteries, etc; motor load list and datasheets. Also,
performing calculations, such as load flow, short circuit, motor starting, Time-Current
Curves, etc using SKM’s PTW software.
Prepared man-hours estimate, project schedule, coordinated with different disciplines,
contract negotiation with vendors.
08/04 – 3/06 Framatome-Areva
Title: Principal Engineer
As a Lead Engineer, provided technical direction to a group of 5 engineers and 3
designers. Prepare/review electrical calculations such as panel loading, cable/
breakers/fuse sizing, voltage drop, short circuits, power distribution and lighting etc for
480VAC, 208/120VAC, and 250/125VDC systems. Prepare/review the modification
changes. Also, update electrical and controls drawings such as one lines, schematics,
wiring diagrams. Specify/ purchase electrical equipment such as switchgears, MCCs,

5. Resume of Sarvottam K. Mehta
Page 5 of 6
distribution panel boards, transformers, motors, cables, circuit breakers, fuses, etc.
provide technical direction to junior engineers/designers.
03/02 – 08/04 Washington Group International
Title: Principal Electrical Engineer
As a Supervisor, I led a group of 4 engineers and 2 designers. Performed engineering/
design of 6900VAC, 480V/120VAC, and 125VDC power distribution work for
office/power plants facilities. Prepared engineering documents such as One-Lines,
wiring, power plans, lighting plans, panel schedules, etc., purchase orders for
emergency/standby diesel generators, switchboards, transformers, panels, ATS, etc. Also,
prepared Purchased Requisitions, Equivalent Replacement Evaluation, etc in Material
Engineering Group. Provide technical direction to junior engineers and designers.
09/01 – 2/02 MPR Associates, Inc.
Title: Senior Engineer
Worked on power plants projects, medical facilities, process plants, etc. Design of power
distribution system, lighting. prepare/review calculations, review of equipment
qualifications, third party evaluations, inspections, routing of cables and raceways, etc.
11/00 – 08/01 Bechtel Telecommunications
Title: Senior Electrical Engineer
Designed Nextlink telecommunications’ ISP facilities ranging from 10,000 square feet to
30,000 square feet. Performed design of AC (6.9KV, 480/277VAC, 208/120VAC) and
DC (125VDC, 48VDC, 24VDC) power plants including the lighting design, sizing of
electrical service, grounding, batteries, routing of cables and raceways, rectifiers.
Prepared power plans, panel schedules and specifications. Coordinated construction
works with contractors and vendors. Performed load flow, short circuit and breakers
setting calculations using ETAP software.
6/99 –11/00 Carter & Burgess
Title: Senior Electrical Engineer
As a project engineer for telecommunications projects for the Central Office Engineering
(Data Centers, cell towers) ranging from 500 sq. ft. up to 40,000sq.ft, performed design
of AC (480/277VAC, 208/120VAC) and DC (125/48/24VDC) power plants, lighting
design, power distribution, grounding, network planning, fiber and conduits installation
for data communications for clients such as Colo.com, Prism, Winstar, Genuity, Sigma
Network and Southwestern Bell. Prepared power plans, panel schedules and
specifications. Also, coordinated construction works with contractors and vendors.

6. Resume of Sarvottam K. Mehta
Page 6 of 6
Also performed Bank of America building renovation project and DFW airport new
terminal D project.
11/98- 6/99 Excel Communications
Title: Senior Electrical Engineer
Performed design of AC and DC power plants, data communications for Central office
ranging from 10, 000 sq. ft. up to 25,000 sq.ft for Excel Communications. Reviewed the
design drawings, such as power plans, lighting plans, grounding plans, panel schedules
and specifications. Also, coordinated construction works with contractors and vendors.
3/96 –10/98 CDM, Inc
Title: Senior Electrical Engineer
Performed design for cities and county water and wastewater treatment plants controls,
instrumentation, network planning, monitoring and data acquisitions.
5/95- 3/96 Wyman Gordon Forging
Title: Senior Project Engineer
Performed maintenance and engineering support of machine controls and monitoring
(PLC and SCADA) the performance of machines with data acquisitions using fiber
installations.
2/94- 4/95 General Motors Corporation
Title: Senior Controls Engineer
Performed maintenance and engineering supports of machine controls and monitoring
(PLC and SCADA) the performance of machines with data acquisitions using fibers,
conduits installations.
The following are the other employers; I performed design of power distribution,
instrumentation, controls and monitoring.
9/88-6/93 Stone & Webster
Title: Senior Electrical/Controls Engineer
9/87- 9/88 Ebasco Services
Title: Senior I & C Engineer
9/84 – 9/87 General Electric
Title: Electrical/Controls Engineer
.
PERSONAL: U.S. CITIZEN.

7. Resume of Sarvottam K. Mehta
Page 6 of 6
Also performed Bank of America building renovation project and DFW airport new
terminal D project.
11/98- 6/99 Excel Communications
Title: Senior Electrical Engineer
Performed design of AC and DC power plants, data communications for Central office
ranging from 10, 000 sq. ft. up to 25,000 sq.ft for Excel Communications. Reviewed the
design drawings, such as power plans, lighting plans, grounding plans, panel schedules
and specifications. Also, coordinated construction works with contractors and vendors.
3/96 –10/98 CDM, Inc
Title: Senior Electrical Engineer
Performed design for cities and county water and wastewater treatment plants controls,
instrumentation, network planning, monitoring and data acquisitions.
5/95- 3/96 Wyman Gordon Forging
Title: Senior Project Engineer
Performed maintenance and engineering support of machine controls and monitoring
(PLC and SCADA) the performance of machines with data acquisitions using fiber
installations.
2/94- 4/95 General Motors Corporation
Title: Senior Controls Engineer
Performed maintenance and engineering supports of machine controls and monitoring
(PLC and SCADA) the performance of machines with data acquisitions using fibers,
conduits installations.
The following are the other employers; I performed design of power distribution,
instrumentation, controls and monitoring.
9/88-6/93 Stone & Webster
Title: Senior Electrical/Controls Engineer
9/87- 9/88 Ebasco Services
Title: Senior I & C Engineer
9/84 – 9/87 General Electric
Title: Electrical/Controls Engineer
.
PERSONAL: U.S. CITIZEN.