1. NAME: MOHAMMAD ADNAN SUJAN
PROFESSIONAL ENGINEER (WA, United State of America - 43263)
BOARD OF ENGINEERS MALAYSIA (BEM 16163)
CONTACT NUMBER: +6017 223 8673
ADDRESS: B17-03A AMPANG PRIMA CONDO JALAN WAWASAN 2/5 B.B. AMPANG 68000 SELANGOR
EMAIL: adnansujan@gmail.com
SUMMARY
Professional and Registered Engineer in Malaysia (BEM 16163) and the USA (43263) with sixteen (16) years
of professional working experience. The scope of works included design in the onshore and offshore (fixed
and mobile) oil and gas production facilities, oil storage and pipeline facilities, design of the electrical power
plants, waste water treatment facility, nuclear waste treatment process facility and manufacturing test and
support in an electronic factory.
INDUSTRY / LOCATION PROJECT PHASES SCOPE of PROJECT
Onshore
- Power Generation:
USA, Mexico, England,
Thailand and Malaysia
- Water Treatment Plant:
Trinidad and Tobago
- Oil and Gas
(Midstream): Malaysia
and Iraq
Offshore (Upstream)
- Oil and Gas: Brazil,
Iraq, Iran, Malaysia,
Syria, Vietnam
Proposal
Conceptual Engineering
Front End Engineering
Design
Detail Design
Construction and Hook
Up Support
Pre-commissioning &
Site Testing
Supervision
EPCC:
- Electrical Power Plants, Onshore
- Nuclear Waste Treatment Plant,
Onshore Washington
- OSX1 FPSO, Offshore Brazil
- Lewek EMAS FPSO, Offshore
Vietnam
- Iraq Pipeline & Oil Terminals
(SEALINE)
EP:
- Ruby FPSO, Offshore Vietnam
Proposal/Concept/FEED:
- Offshore Peninsular Malaysia
Cendor Oil Field Development,
(2 Wellhead Platforms + 1 Cendor
FPSO)
- EPCIC North Malay Basin Full Field
Development Floating Storage
Offloading (FSO) Facility
E:
- PWFU Package, East Piatu
Platform, Offshore Malaysia
- Remote Monitoring & Control Solar
Power, Baram Field, Offshore
Malaysia
- Shell BLI Gantry Upgrade Project
Bagan Luar Penang Malaysia
- PETRONAS Utilities Gebeng Cogen
Expansion Project Gebeng Pahang
Malaysia
2. DATES COMPANY POSITION, RESPONSIBILITIES, ACCOMPLISHMENTS
October 2015 – February
2016
Foster Wheeler (OPE) Malaysia
Sdn. Bhd.
Lead Electrical Engineer
Client/Projects:
PETRONAS Gas Berhad
PETRONAS Technical Services Sdn
Bhd
Basic Design Engineering, for Utilities
Gebeng (UG) Cogen Expansion
Project Gebeng Pahang Malaysia
Project Scope: Additional of One (1)
Unit of 11kV 56.5MVA 0.8 p.f. 50Hz
Gas Turbine Generator (GTG)
Lead Electrical Engineer
Developed and completed electrical design basis for the
project
Developed and completed a GTG, a 11/33kV 56.5MVA
ONAN Generator Step Up (GSUT) power transformer & a
400kVA 11/0.415V Generator Unit Auxiliary (GUAT)
transformer, an 11kV electrical Bus Ducts, 33kV double bus
bar switchgear Is Limiter, Power Cables and Integrated AC
& DC UPS specifications and datasheets
Developed and completed overall UG plant Single Line
Diagram showing the project scope expansion and
requirements
Checked and reviewed electrical equipment specifications
and datasheets for 52/65MVA ONAN/ONAF 132/3kV power
Transformers, 132kV and 33KV Gas Insulated Switchgears
for an additional connection to the 132kV Tenaga Nasional
Berhad (TNB) power line
Developed and completed cable sizing calculations and
cable schedule (Power and Control)
Developed and completed budgetary electrical Material
Take Off (MTO) for the project
Provided technical assistance to electrical physical design
deliverables such as cable routing, existing equipment
adequacy check and electrical equipment spare utilization
Developed and completed electrical Scope of Work for
Detailed Design Engineering, Procurement, Construction
and Commissioning Invitation to Bid (ITB)
Completed PETRONAS safety management and quality
control exercises such as Hazard & Operability Study
(HAZOP), PETRONAS Electrical safety and operability review
(ELSOR), Mandatory Control Framework (MCF) & Flaw
Identification Exercise (FIE)
Coordinated and provided technical inputs to other
disciplines
July 2015 – September
2015
Foster Wheeler (OPE) Malaysia
Sdn. Bhd.
Lead Electrical Engineer
Client/Projects:
Shell Malaysia Trading Sdn Bhd
Engineering, procurement and
Construction of BLI Gantry Upgrade
Project Bagan Luar
Penang Malaysia
Project Scope: Upgrading the oil
terminal from top to bottom loading
Lead Electrical Engineer
Checked and reviewed plant current existing electrical
power system and advised changes to be proposed to
SHELL
Checked and reviewed plant overall Single Line Diagram
System showing project upgrading scope requirements
Checked and reviewed electrical equipment specifications
and data sheets for Transformers, Switchgears, Diesel
Engine Generator, Bus Ducts, Power Cables, DC UPS, and
Variable Frequency Drives
Checked and reviewed electrical power system load lists
Checked and updated Protection and Metering Diagrams
for 11kV Switchgear
Checked and updated cable sizing calculations and cable
schedule (Power and Control)
Provided technical assistance to electrical physical design
deliverables such as cable routing, material take-off,
electrical building and electrical equipment layout.
Provided technical inputs to other disciplines.
July 2014 – July 2015 Foster Wheeler (OPE) Malaysia
Sdn. Bhd.
Foster Wheeler Upstream Trinidad
Tobago
Senior Electrical Engineer
Senior Electrical Engineer
Developed plant overall Single Line Diagram System,
Beetham plant and Point Lisas plant
Developed electrical equipment specifications and data
sheets, Transformers, Switchgears, Diesel Engine
Generator, Bus Ducts, Power Cables, DC UPS, and Variable
3. Client/Projects:
The National gas Corporation
Trinidad and Tobago Limited/Super
Industrial Services Limited
Project Scope: Engineering,
procurement and Construction of
Beetham Wastewater Recycling
Treatment Plant Project at Beetham
and Point Lisas Trinidad locations
Frequency Drives
Performed load flow, short circuit and motor starting
calculation utilizing ETAP version 12.7.5
Updated electrical load lists
Developed Protection and Metering Diagrams
Developed overall plant system grounding grids and
calculations
Developed cable sizing calculations and cable schedule
(Power and Control)
Provided technical assistance to electrical physical design
deliverables such as cable routing and equipment locations.
Provided technical inputs to other disciplines.
May 2014-June 2014 Client/Projects:
Hess/ North Malay Basin
Development Project - EPCC Floating,
storage and Offloading (FSO) facility
Project Scope: Technical Bid
Preparation
Lead Electrical Engineer
Prepared FSO single Line Diagram for the FSO
Checked and verified conceptual/basic design phase
Electrical Load List
Prepared Electrical Design Conversion Specification
Prepared Electrical System Overview
Prepared Earth Monitoring Block Diagram
Prepared Generator Oil Consumption Calculation
January 2014 – May 2014 Foster Wheeler (OPE) Malaysia
Sdn. Bhd.
Lead Electrical Engineer
Client/Projects:
PETRONAS Petroleum Management
Unit (PMU) / Nosong-Bongawan
Development Project
Project Scope: Project Management
Service for Provision of Front End
Engineering Design (FEED) of Nosong-
Bongawan North Field Block B310
Sabah Malaysia
Lead Electrical Engineer
Checked and reviewed project scope, FEED deliverable
requirements
Checked and reviewed FEED documents from three
selected design engineering Bidders
Checked Bidders electrical design and calculation against
PETRONAS technical standard (PTS)
Produced and submitted technical clarification to Bidders
for unclear technical issues and coordinated with Client for
PMU standard advices
Closed technical issues with Bidders
Generated and completed technical summary report
summarizing project technical reviews
Lead Electrical Engineer
Client/Projects:
Newfield
East Piatu
Offshore Malaysia
Project Scope: Engineering Detailed
Design for additional of Multi Phase
Flow Meter PM323 East Belumut A
Platform
Lead Electrical Engineer
Checked and reviewed project scope, existing key single
line diagram and load list
Checked electrical power capacity and adequacy calculation
Checked cable schedules, cable sizing and load list reports
Checked layout drawings
Reviewed and provided inputs to other engineering
discipline documents and drawings
4. October June
2011 2013
Leighton Engineering Consultant
Sdn. Bhd.
Senior Electrical Engineer
Client/Projects:
South Oil Company, Iraq
Detailed Design for Crude Oil Export
Facility Reconstruction Project,
Sealine Project
Senior Electrical Engineer
Developed Electrical Design Basis for the project
Completed power transformer, diesel engine generator,
electrical House, and navigational aids specifications,
datasheets, and technical bid evaluation
Completed electrical equipment list for pipeline valve
stations
Checked and reviewed project scope, key single line
diagrams
Checked cable schedules, AC & DC distribution board
specification, cable sizing and load list reports
Checked load flow and short circuit calculations
Reviewed and provided inputs to other engineering
discipline documents and drawings
March September Feb
2011 2011
DPS Consultant Malaysia Sdn. Bhd.
Senior Electrical Engineer
Client/Projects:
OSX Brazil/ Engineering,
Procurement, Construction and
Commissioning of OSX -1 (FPSO)
Floating, Production, Storage and
Offloading Vessel for Waimea Field
Offshore Brazil
Senior Electrical Engineer
Engineered and managed the development of FPSO
electrical distribution module, housing power transformers,
switchgears and control panels, heating, ventilation, air
conditioning and fire suppression systems, among others.
Completed the design of electrical heat tracing system for
the project including its specification, datasheets, cable
schedule, vendor bids technical reviews and vendor
document review and approval for construction
Revised and completed cable routing system for the
Electrical distribution module
Supported hook-up, construction yard and commissioning
teams
Meeting and coordinated with several vendors to finalize
system interconnection and operational requirements for
HVAC, fire suppression Inergen and electrical heat tracing
systems.
Completed electric motor and electrical equipment
specifications
December
2010
February
2011
DPS Consultant Malaysia Sdn. Bhd.
Senior Electrical Engineer
Client/Projects:
EMAS Offshore Construction/ Lewek
EMAS Floating, Production, Storage
and Offloading (FPSO) Vessel for
Chim Sao Block 12W Offshore
Vietnam
Senior Electrical Engineer
Completed 6.6kV and 400V Interconnection and Single Line
Diagrams for Marine & Topside load requirements
Revised and updated cable schedules
Completed Heat Tracing System for the project
Reviewed load flow, short circuit, motor starting and
acceleration, and transient stability studies
Supported Construction Yard and Commissioning teams for
Electrical Issues
Meeting and coordinated with several vendors to finalize
system interconnection and operational requirements
October
2010
November
2010
DPS Consultant Malaysia Sdn. Bhd.
Senior Electrical Engineer
Client/Projects:
Al Furat Petroleum Company/Nishan
Station Rationalization
and Manifold Upgrade
Senior Electrical Engineer
Completed power system sizing calculation and
specifications of UPS and Distribution Board
Completed datasheets of UPS and Distribution Board
Performed layout drawings and cable routing plan for the
switchgear room modification
Coordinated with clients closely for system works
improvement
Updated electrical work progress and attended project
progress meeting
Involved in meetings with vendors to finalize system
requirements and operation
March 2010 September
2010
DPS Consultant Malaysia Sdn. Bhd.
Senior Electrical Engineer
Senior Electrical Engineer
Assisted Engineer by checking and completing power
system sizing calculation and specifications.
Completed design analysis and specification and datasheets
5. Client/Projects:
Petrofac (Malaysia - PM304) Ltd
Provision Of Front End Engineering &
Design (FEED) For Cendor Phase 2
Development Project Block PM304
for Subsea Cable system
Performed internal checking for power system sizing
calculations, load flow, short circuit and motor starting
calculations
Performed Cable Sizing and Uninterruptible Power Supply
system calculations
Performed layout drawings and cable routing plan for the
switchgear room modification
Coordinated with clients closely for system works
improvement
Updated electrical work progress and attended project
progress meeting
Involved in meetings with vendors to finalize system
requirements and operation
October
2009
February
2010
OPT Consultant Malaysia Sdn. Bhd.
Lead Electrical Engineer
Client/Projects:
PETRONAS Sarawak Operation/OPE
(Malaysia) Sdn Bhd
Baram Remote Monitoring and
Control System – Remote Terminal
Unit Solar Power System Design
Lead Electrical Engineer
Conducted study to determine RTU solar power system
characteristic and loading requirements
Coached Engineer to start on system calculation and
drawing requirements and standard calculation procedures
Assisted Engineer by checking and completing system sizing
calculation and specification
Updated electrical work progress and attended project
progress meeting
Meeting with vendor to finalize system requirements and
operation
Produced marked up drawings to install RTU solar power
system on Baram Platforms
September
2008
September
2009
DPS Consultant Malaysia Sdn. Bhd.
Sales and Proposals Group
Client/Projects:
Petrofac (PM-304) Malaysia Ltd
Cendor Phase-2 Conceptual
Development Plan Block PM304
Proposal Manager
Managed incoming project enquiries and initiate project
feasibility studies, ensuring project reliability, security and
effective use of resource allocation
Produced technical recommendations, summary sheets and
execution risks for Company to proceed with the proposal
or to decline
Produced and strategize a competitive pricing scheme and
capital expenditure per each accepted enquiry, showing
details of project management and execution resource
allocation breakdown
Prepared and established preliminary project execution
plan, pre-contract procedures and project specific safety
and quality plan per the enquiry.
Managed and supervise a proposal team of 3 people,
supporting in compiling proposal paperwork, screening pre-
contract documents, preparing supporting information,
planning man/woman-power allocation
Discussed and respond to all clients’ clarification and
questions either by meeting them, by emails or phone.
Prepared outgoing correspondences such as Acceptance,
Clarification, Decline, Follow up Letters to clients
Conducted and chair proposal meeting with director and
completed Meeting Minutes for distribution
Senior Project Engineer
Prepared and completed Project Execution Plan for the
Cendor Phase 2 Field Development project
Developed project Master Deliverables Lists for project
schedule inputs and milestone breakdown
Organized project kick off meeting, prepared minutes of
meeting, action and execution plans
Completed project control plan and documents handover
from Clients to Project teams.
6. September
2008
February
2009
DPS Consultant Malaysia Sdn. Bhd.
Package Engineer
MMHE Berhad,
Ruby Princess Floating, Production
Storage and Offloading (FPSO)
Process System Design
Package Engineer – HVAC/UPS System
Performed Heat Loss Calculation of the Electrical Room for
HVAC design inputs and specification
Reviewed and approved HVAC System Design Philosophy
and Calculations per IEC, API, ABS and ASHRAE standards
Assisted, reviewed and approved HVAC system design
drawings and equipment design details
Witnessed Factory Acceptance Test for HVAC equipment,
Air Handling Units and Power Control Panel
Performed and checked HVAC control system per the
Electrical room design criteria
Reviewed and tested Control and operational logic diagram
and cause-effect matrix.
Reviewed UPS system datasheets and system design per IEC
standards.
November
2007
August
2008
Sime Engineers Sdn. Bhd.
Electrical System Group
Laem Chabang, Thailand
Project: 60MW CCGT Power Plant
Expansion Project
Senior Electrical Engineer
Coordinated and supervised equipment suppliers and
project construction team for 115KV and 22KV Gas
Insulated switchgears (GIS) installation and erection
Performed design review and supervised site modification
and commissioning tests of 115KV and 22kV GIS, 6.6KV and
400V Switchgears, 400V Motor Control Centers, Emergency
Diesel Generator (EDG) and Uninterruptible Power Supply
(UPS) System
Reviewed, witnessed and completed recommendation for
factory acceptance test reports on the EDG control Panel
and 400V Motor Control Centers (MCC)
Assisted and supervised in 6.6kV and 400V Switchgear
design site modification, testing and commissioning
Supervised, lead and coordinated electrical team members
for balance of facilities electrical equipment site acceptance
testing and completion of electrical equipment installation,
commissioning and technical issues
July 2002 September
2007
Bechtel National Inc.
Electrical System Group
Richland, Washington
Project: Nuclear Waste Treatment
Plant
(http://www.waste2glass.com)
Responsible for the design and
calculations for the project electrical
power distribution system (13.8kV
and below)
Electrical Engineer
Prepared and performed short circuit analysis and power
flow calculations
Prepared and completed Power System Protection
calculations and settings
Revised and completed underground cables sizes by
performing cable ampacity and temperature limit
calculation
Performed and completed voltage drop analysis on 13.8KV
feeder cables to confirm adequate cable sizes and rating for
facility power distribution
Initiated, completed and issued schematic and block
diagrams based on vendor submittals and project
requirements
Completed and issued one-line diagrams for 5kVA
uninterruptible power supply system (UPS)
Completed and issued logic diagrams for medium voltage
protection system
Assisted senior engineer with the relay coordination
calculations
Completed for checking Drawing Change Notice (DCN) to
revise medium voltage switchgear circuit breaker schematic
drawings to match with vendor submitted drawings
Updated and revised 208/120V panel schedules based on
the revised load profiles
Developed interconnection diagrams and completed cable
data information for project mechanical handling
equipment and systems
7. Assisted in the revision of facilities 480V load list by
identifying the project approved cable sizes during the
development of schematic and block diagrams
Completed and issued lighting system design by issuing the
calculations, physical drawings and panel schedules
Coordinated closely with the construction of any physical
issues and design optimization regarding the safe
installation of lighting fixtures
Completed preliminary studies and calculation in the LAW
hot in-cell pour cave areas and completed functional
specification and requirement for specialized hot-cell
lighting fixtures to be purchased
Revised, completed and issued roadway lighting calculation
Completed checking LAB lighting calculation
Revised and updated LAW facility lighting and convenience
power receptacle drawings
Assisted physical designers in the revision of the
aboveground raceway sizes, service levels, optimized
layouts and cable routes
Maintained cable database information per work process
and submitted progress quantity reports to LAW
management team
May 2001 June 2002 Bechtel Power Corporation
Multi Project Acquisition Group
(MPAG)
Frederick, Maryland
Projects: Combined Cycle Power
Plants
Responsible for the specifications and
procurement of electrical equipment
Electrical Engineer
Prepared material requisitions, data sheet, and technical
specifications for engineering products of various power
plant design and construction projects around the world
Provided and support cost estimation, technical calculation
preparation, technical bid evaluation and acquisition of
major equipment and bulk materials through strategic
global supplier agreements and competitive bidding
Completed the technical reviews and purchases of High
Voltage Power Transformers and Motor Control Centers for
Power Plant Projects in Mexico, Europe, and the United
States
Attended in-house training and seminars for oil and gas
industry applications.
September
1998
December
2000
Drexel University
Power Research Center,
Department of Engineering
Philadelphia, Pennsylvania
Project: Power Generation and
Distribution Analysis
Responsible for the Northeastern
United States power distribution
studies
Research Assistant
Conducted research in the area of deregulated power
system reliability and efficiency
Wrote Matlab program to automate the reliability of power
utility output data in the Automatic Generation Control
(AGC) studies
Heavily utilized MS office software for statistical,
computational and presentational purposes
Performed PSS/E simulations for power system Availability
Transfer Capability (ATC) studies
Published two IEEE conference papers and participated in
IEEE (PES) Summer Meeting 2000 in Seattle, Washington
March 1997 September
1998
VIZ Manufacturing Company
Department of Engineering
Philadelphia, Pennsylvania
Project: Atmospheric Measurement
System for the United States Navy
Responsible for the testing and
trouble shooting
Student Engineer
Troubleshot, repaired and downloaded a software into GPS
radiosonde circuit boards (about 50 boards/day) using
automatic testing equipment
Planned, developed and systematized radiosonde repair
procedures for assembly line personnel
Developed and coordinated testing facility for GPS
radiosonde (Test 5 Radiodsondes at one time)
Conducted and administered testing using VIZ software
(W9000) on GPS radiosonde ground receivers
Performed temperature and frequency tests on Voltage
Controlled Oscillator (VCO) in PLL design
8. EDUCATION AND PERSONAL DEVELOPMENT PROGRAMS
Degree, Certificate, etc., School Major (or Subject) Date
Board of Engineers Malaysia
Professional Engineer License
Institution of Engineers
Malaysia/Board of Engineers
Malaysia
BEM Professional Engineer
Certificate of Attendance Organized by Petro Edge Asia &
Seminar by Azur Offshore Ltd
Introduction to Floating
Production Storage and
Offloading Technology
September 2011
Certificate of Attendance Organized by Comfori Sdn Bhd Technical Report Writing December 2008
Certificate of Attendance Organized by Ideapro-logix &
Seminar by Y.C. Chow
Business Presentation Skills June 2009
Certificate of Attendance Organized by Petro Edge Asia &
Seminar by Jayem Dhingra
EPCIC Contract Management &
Essential Elements of
International Contract Law
December 2008
Washington State (WA) USA
Professional Engineering
License (No. 43263)
IEEE reviews by Pacific
Northwest National Laboratory
(PNNL) Richland WA
Professional Engineering for
Electrical Engineering License/
Registration
January 2007
Engineering in Training (EIT)
Certificate
Bechtel University Electrical Engineering June 2002
Master of Science Drexel University Electrical Engineering June 2001
Bachelor of Science Drexel University Electrical Engineering June 1998
OTHER SIGNIFICANT INFORMATION
PERSONAL: Committee member of IEM Marine and Naval Architecture Technical Division 2015/2016
Submitted a technical paper entitled, Shipboard Power Cable Sizing Methodology in IEM September
2015 Bulletin
Conducted Informal Professional Training Courses, Introduction to Oil and Gas, Introduction to
Floating, Production, Storage and Offloading (FPSO) Vessel Facility Apr. & Jun. & Sept. and Oct. 2015
Conducted IEM professional technical talk – Introduction to FPSO November 2013
Vice Chairman of Ampang Prima Condominium for 2009-2010 & Join Management Body member and
responsible for Electrical and Mechanical System operation and maintenance of the Condominium
2012/2013
Active in Central Washington Soccer League (2002 – 2006)
3
rd
place in soccer tournament for Malaysian Midwest Games 2006 in Madison Wisconsin USA
LANGUAGES Read and Write Bahasa Melayu and English
COMPUTER CAPABILITIES: MICROSTATION, AGI32 Lighting Analysis Software, Dialux Lighting Calculation Software, Microsoft
Offices, Engineering Transient and Analysis Program (ETAP), MATLAB
OTHERS: Completed Six Sigma & Performance Based Leadership training
Completed 24 hours of Power System Protection training by Schweitzer Engineering Laboratory
Pullman WA USA
PROFESSIONAL MEMBERSHIP AND SOCIETIES
BOARD OF ENGINEERS MALAYSIA (BEM)
INSTITUTION OF ENGINEERS MALAYSIA (IEM)
WASHINGTON USA PROFESSIONAL LICENSING BOARD
MEMBER OF INSTITUTE OF ELECTRICAL & ELECTRONICS ENGINEERS (IEEE)
REFERENCES
M. Firdaus Noordin +6019 770 7971
Azaruddin Ibrahim +6017 361 8844
Abdul Manan Mokhtar +6019 266 4654
Asmizan Ibrahim +6019 228 4045