1. Mobile phone repair requires proper safety precautions to avoid damaging delicate components and risk of electrostatic discharge. 2. A grounded anti-static mat, gloves, and wrist strap should be used along with specialized tools and trays when disassembling phones to prevent static electricity from harming parts. 3. Hot air stations and soldering irons must be handled carefully as they can damage phones and pose burn risks, and data should be backed up before resets to avoid loss of important customer information.

1. Safety tips for mobile phone repairing - Programmer Fast
Guidance
In the age of internet, you can learn anything Cell Phone Repair
like a do-it-yourselfer by getting access to proper manuals, guides
or tutorials. You will also need lots of practice and have to do trial
and error until you learn this particular skill perfectly.
Next, vipprogrammer will can offer some practical Cell Phone
Repair Safety guide.
Earn About all Safety and precautions that must be
followed while repairing mobile cell phone:
 Safe Work Station Table
 Right Safe Tools
 ESD Protection
 Safe Tray

2.  Handle Delicate Parts
 Hot air and Soldering Iron
 Take care of data
The topics covered are how to use various tools, how to check
various parts and components inside a mobile phone the
components, Mobile Phone Repairing tools Safety guidelines and
precautionary measures is a must not only while repairing mobile
phone but also while handling or repairing any electronic device or
gadget. The parts inside a mobile phone or smartphone are very
sensitive especially to ESD or Electrostatic Discharge. By adopting
safety measures and maintaining precaution, you can avoid any
unwanted damage to the PCB of Mobile Phone.
Mobile Phone Repairing Safety Tips and Precaution:
Guidelines and Instructions
1. Safe Work Station Table: repairing of any smartphone ，
tablet, any other such electronic gadget must always be done on an
ESD-Safe Workbench. This prevents the gadget or mobile phone
from any potential damage due to static electricity. Such work
stations are well equipped so that all your tools of regular use are
within your arms reach and at appropriate place.

3. 2. Right Safe Tools: professional and good quality tools. Do not
use alternative tools or cheap tools.Use only dedicated tools for
particular device you want to repair and fix. Such as Anti static
gloves, Anti Static ESD Discharge Cable, For this job, low-cost
phone Disassemble Tools Opening Pry Tools made of hard plastic
are easily available. Similarly, you will always need Multifunction
Screwdriver for such repairing jobs.
3. ESD Protection: For ESD protection, you need to wear
ESD-Safe Apron, ESD-Safe Slippers, ESD-Safe Hand Gloves and
Anti-static wrist strap. You must also work on a well grounded esd
mat. Combination of these three will make sure that no unwanted
static electricity from your body is transferred to the gadget you are
repairing. ESD protection is for the safety of the electronic
components on the logic board or the motherboard.

4. 4. Safe Tray: There are readily available and don’t cost much.
Whenever you disassemble any mobile phone handset, place all the
part in separate compartments of the tray. This will make your life
much easier when you reassemble the mobile phone because you
don’t have to remember where you placed the part. All of them are
already well organized in different compartments of the tray.
Remember smartphone and mobile phone have number of
tiny screws and these are the ones that get lost most of the time.
Using a tray with different compartments for different part will
your life easy.
5. Handle Delicate Parts: Most of the parts in a mobile phone
or smartphone are very delicate. Take care about them. For
example make sure the LCD Screen does not get any scratches.
Make sure to handle connectors and connecting cables carefully as
they are very delicate.
6. Hot air and Soldering Iron: Hot air machine and soldering
iron or soldering station must be used and handled carefully, They
can damage the gadget and even harm you. Hot air machine
produces hot air with very high temperature. Make sure the
direction of the nozzle is where it should be. Switch it OFF when
not in use. Similarly use a hot soldering iron with care. Always
place the iron in a iron stand and do not put it on the table. Such

5. repairing jobs also need use of highly inflammable liquid. They
need to be placed at the right place to avoid high heat.
7. Take care of data: Many times you need to perform hard reset
or factory reset or reinstall the operating system or IMEI in a
mobile phone. During the process, data stored in the mobile phone
memory and even external SD card might get deleted. This data
can be very important for some customers. So, make sure to
backup all data before performing and factory reset.
Tips: All the above Cell Phone Repair tools and more Cell Phone
Repair discounts Information Your Can look
over www.vipprogrammer.com.