This document provides a summary of Ryan Pineda's qualifications and work experience. It outlines his role as a Senior QA/QC Supervisor at Mun Siong Engineering Limited where he oversees quality inspection and ensures construction meets standards. It also lists previous roles in quality control and inspection for various construction and engineering projects in Singapore, Qatar, and Saudi Arabia. Pineda has over 10 years of experience in mechanical, piping, instrumentation and electrical quality assurance.

1. QUILALA, RYAN PINEDA
Nationality : Filipino
Date of Birth : September 26, 1984
Address : Apt/Blk 43 Holland Drive. #03-51,
Singapore 270043
Email address : quilala_ryanp@yahoo.com
Contact Nos. : (+65)85104187
NRIC/FIN No.: G5155131T
PROFILE:
With enriched experience and knowledge in the field for Mechanical, Piping,
Instrumentation and Electrical work. Have been involved with various QA/QC and
Technical Inspection and Testing of plant construction equipments and materials with
accordance to the project standards and specifications.
JOB EXPERIENCE:
MUN SIONG ENGINEERING LIMITED
Mun Siong Engineering Limited
35 Tuas Road, Singapore 638496
July 16, 2012 – Present
ACTIVITIES:
• Senior QA/QC Supervisor/Lead
• Preparations of documents and presentation for Project Pre-Inspection
Meeting.
• Coordinate and attend weekly meeting with Client’s Project Managers,
Project Engineers and Project Supervisors for progress status of updates.
• Conduct meeting and briefing for the Project requirements and standard
procedure.
• Allocate workloads and schedules to corresponding Project QC Inspectors.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.

2. • Maintenance QA/QC SUPERVISOR (Piping and Mechanical)
• Ensure that safety practices were followed prior to commencement of
work.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.
• To interface and coordinate with clients QC matters with for all related
inspection activities.
• Prepare and submit relevant report such as but not limited to weekly or
monthly and other report as may be requested by the Project QC Manager.
• Performing and carrying out all standard NDT and Testing requirements.
• Visual inspection and dimensional of completed weld against the
specifications requirements and drawing. Reviewing of hydro test package
and conduct line checking/ punch listing (to ensure that all welds on lines
are completed) prior for hydro testing.
• QCT Engineer for TFA ( TOTAL FLANGE ASSURANCE )
• Ensure proper coordination with the main contractor (SEPL).
Develop QC measurements model at Bolt-UTG as per given TFA
specification for bolted joints for zone 2-4.
Support activities of Authorize Foreman and deliver full range of QC
duties at flanges assigned for Bolt-UT measurements by TFA
specification.
Witness and inspect hydrostatic testing for Vessels, Columns and
Exchangers.
Take Reference and Final Bolt-UT readings for bolted joints at zone 2-4.
Accept or Reject joint tightness based on Bolt-UT measurements and
result of visual inspection
Put a seal on accepted flanges
Advise Authorize Foreman on failure mitigation actions in case of flange
rejection.
Report to SEPL Executing Engineer QC progress and all cases of TFA
non-compliance.
Manage data files and prevent data corruption or losses.
Cooperate with Tensioning / Hydraulic torquing supervisor (supplied by
TET Alliance) to acquire Reference and Final measurements of stud bolt
loading for all tensioning / Hydraulic torquing job

3. CWT ENGINEERING PTE. LTD.
47 Jalan Buroh, Singapore 619491
June 10, 2011 – July 14, 2012
ACTIVITIES:
• SUPERVISOR
• Ensure that safety practices were followed prior to commencement of work.
• Supervision in allocation of manpower to ensure the quality of production
for mechanical materials with accordance to the clients standards.
• Material Receiving, Inspections and Measurement of Fabricated Materials.
Pipes, Steel Plates, Beams and Metal profiles prior to Blasting and
Painting.
• Coordination with client QC for the required paint and specification.
• Implementation of inspection standards for Blasting and Painting of Pipes
and Steel Plates.
• Testing of WFT and DFT of painted materials with accordance with the
client standards and specifications.
• MAINTENANCE ENGINEER
• Maintaining the condition of all blasting and painting machine.
• Ensure quick solution and fixed up upon machine breakdown for
continuous production.
QATAR SHELL PEARL - GTL PROJECT
S.E.C / CHIYODA HYUNDAI HEAVY INDUSTRIES
RAS LAFFAN Industrial City, Qatar
December 01, 2009 – December 01,2010 (End of Contract)
ACTIVITIES:
• INSTRUMENT and ELECTRICAL QA/QC INSPECTOR
• Implementation of final installation standards and inspection for Field
Instruments, Stanchions and Cable Trays.
• Installation and Leak Testing of Air / Impulse tubing for various
instruments.
• Insulation resistance and Continuity testing of Control Cables, Power
Cables and Instrument Cables.
• Cable Installation, including Tray, Earthing and Bonding jumper
installation inspection.
• Lighting, Switch, Receptacle, Junction Box cable testing and installation
inspection,

4. SHARQ 3RD
EXPANSION, ETHYLENE PLANT
AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph
Industrial City, Al – Jubail, Kingdom of Saudi Arabia
February 27, 2008 – October 16, 2009 (End of Contract)
ACTIVITIES:
• INSTRUMENT QA/QC INSPECTOR
• Material Receiving / Inspection of Construction, Electrical and Instrument
equipments.
• Calibration of Field Instruments.
• Implementation of the installation standards for Field Instruments,
Instrument Panels, Stanchions, Racks and Cable Trays.
• Installation and Leak Testing of Air / Impulse tubing for various
instruments.
• Insulation resistance and Continuity testing of Control Cables, Power
Cables and Instrument Cables.
• PUNCHLIST LEAD QC / COORDINATOR
• Coordinate the inspections of instruments within a given System /
Subsystem with the client (SHARQ PMT) and main contractor ( Shaw
Stone and Webster PMT ).
• Assisting in the supervision of the Field Operation Group (FOG) to ensure
the rectification and closing of punch lists for the compliance with the
project standards and specifications.
• PIPING QA/QC INSPECTOR
• Ensure that safety practices were followed prior to commencement of
work.
• Review and check construction documents being used at site such as:
Method of Statement, ITP, Work Procedure, etc.
• Coordinate with the Material Engineer all relevant material deliveries such
as acceptance and/or rejections.
• Coordinate with engineering and field operation group for the study of
installation works considering technical aspect and work execution.
• Review, check and verify that works are carried according to the required
quality standard and specifications.
• To undertake QC functions in the workplace for daily QC activities.
• To interface and coordinate with clients QC matters with for all related
inspection activities.
• Prepare and submit relevant report such as but not limited to weekly or
monthly and other report as may be requested by the Project QC Manager.
• Visual inspection and dimensional of completed weld against the
specifications requirements and drawing.

5. • Reviewing of hydro test package and conduct line checking/ punch listing
(to ensure that all welds on lines are completed) prior for hydro testing.
• INSTRUMENT AND PIPING TURN OVER REVIEWER
• Ensures that all documents and drawings required per loop are attached
and presented.
• Interpretations of Piping and Instrument Drawing ( P&ID ), Instrument
Loop Diagram ( ILD and other relevant drawings to ensure the testing or
inspection required for the instruments per loops to be accomplished and
properly documented.
• Review of Isometric Drawing and other relevant documents to ensure the
testing or inspection required per packages to be accomplished and
properly documented.
JUAYMAH CAMP RESIDENTIAL EXPANSION
AL – RUSHAID CONSTRUCTION Co. Ltd / EEI CORPORATION .ph
Industrial City, Al – Jubail, Kingdom of Saudi Arabia
February 18, 2008 – February 27, 2008
ACTIVITIES:
• ELECTRICAL QA/QC INSPECTOR
• Material Receiving and Inspections of residential cabins, power cables and
equipments.
• Insulation resistance and Continuity testing of electrical cables.
• Installation of electrical panel.
• Cable Installation, including Tray, Earthing and Bonding jumper
installation inspection.
GV – RADIO BROADCASTING NETWORK
Angeles City, Pampanga, Philippines
August – October 2007
ACTIVITIES:
• STATION TECHNICIAN
• Monitor and Ensures the smooth broadcasting of the station’s programs.
• Maintenance of the subscribe radio frequency output and other
communication equipments.
EDUCATIONAL ATTAINMENT:
B.S in Electronics and Communication Engineering - Holy Angel University
Angles City, Pampanga, Phil.

6. AWARDS / CITATIONS:
Top Performer (Best QC for 2014) - AWARDEE
Mun Siong Engineering Ltd.
Shell Bukom
Top Performer (Best QC for 2013) - AWARDEE
Mun Siong Engineering Ltd.
Shell Bukom
CERTIFICATE for EXCELLENCES - AWARDEE
SHARQ 3RD
EXPANSION PROJECT
Al-Jubail, Kingdom of Saudi Arabia
Institute of Electronics and Communication Engineers - MEMBER
National Chapter, Philippines
Holy Angel University - PESO SCHOLAR
Angeles City, Philippines
Republic Central Colleges - MODEL STUDENT
Angeles City, Philippines
Special Science High School - SCHOLAR
Angeles City, Philippines
SEMINARS / SPECIAL COURSES:
PT Level II (CUTECH Quality Solutions PTE. LTD.)
WORKING AT HEIGHT COURSE FOR SUPERVISORS (K2S Safety
Consultancy PTE LTD)
ASME SEC VII DIV 1 (ABS Consulting)
RI Level II (CUTECH Quality Solutions PTE. LTD.)
Pre-commissioning induction (PEARL – GTL Project)
Total Quality Management ( ISO 9001 AWARNESS )
Pre-Commissioning Training and Seminar (SHARQ 3rd
EXPANSION)
H2S Safety Evacuation Seminar (SHARQ 3rd
EXPANSION)
Power Cables (PHELPS DODGE Phils. ENERGY PRODUCTS)
SYSTEM SOFTWARES, CODES and STANDARDS:
ASME Standards
SABIC Standards
ARAMCO Standards
Microsoft Windows Office
Cisco Networking
Autocad