11 years experience in Residential Villa , Precast structures, Petrol compact stations, Water pipe line project, Industrial projects like ( Thermal power plant, Oil & refinery plant). And Material coordinator & procurement, SAP, Piling, sheet piling,
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
11 years experience in Residential Villa , Precast structures, Petrol compact stations, Water pipe line project, Industrial projects like ( Thermal power plant, Oil & refinery plant). And Material coordinator & procurement, SAP, Piling, sheet piling,
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
More than 17 years’ civil engineering experience specializing in construction of Buildings, Bridges, Roads and infrastructure. Have a good experience of construction of structures from piling works to Superstructure including reinforced structure have good analytical, problem solving skills and project management abilities to deliver within time and budget. Experienced working with the world’s leading consultants Halcrow (a CH2M Hill company) Middle East) at prestigious projects including Abu Abyad & Rafiq island development, Zirku , Sarb North & Sarb South Islands Development, Abu Dhabi;. Worked with Nespak (an organization of Govt: of Pakistan)Have ample knowledge of standards and contract documents (AASHTO, BS, ASTM, ACI ) for quality control, contract administration, and resolving valuations and claims disputes with contractor. Have adequate experience of construction of roads, infrastructure and bridges. Have good analytical skill and sufficient design knowledge for reviewing shop drawings and ensuring compliance with contract drawings and design requirements. Extensive construction supervision and contract administration experience including the payment certificates, management of health & safety and management of quality
"While employed as Civil Engineer with Mott MacDonald Abu Dhabi & My previous employers I improved customer relations and developed new clients, which trusted my employers & Industries for a quality product on time and on budget. In addition, I enhanced Mott MacDonald productivity through development and implementation of manpower schedules, which made the team more effective. Furthermore, I streamlined project costs through Quality Aspects by self-performing large portions of the scope of work. Through strong management skills I reduced contract problems through developing solid trust and communication with job owners and sub-contractors, which raised production with less down time. Lastly, with strong work ethics I boosted employee morale though management by example (not being afraid to roll the sleeves up and get dirty and do what it takes to get the job done). Which in effect raised company effectiveness by being reliable and trustworthy."
1. CURRICULUM VITAE
QA/QC Inspector (civil)
Name : Murugan-R
Mobile No : +91-7094073698, +91- 9047540378
Email : murugan_03civil@yahoo.com
: murugan19821978@gmail.com
As a QA/QC Inspector civil, I have more than 16 years’ experience in the Oil & gas,
Power plant and Industrial Buildings at Dubai, Kuwait, Qatar and India.
I am using the International Standards as per project specification of American
Standards (ASTM, ACI, AISC, and AASHTO) & British Standards.
Education:
Diploma in Civil Engineering, Tamil Nadu, India.
Diploma in AutoCAD.
Staad Pro V8i
MS Office (Excel, word, Power point)
Holding
India Driving License - India
Permit To Work Training Level 1 - Qatar
H2S/BA Certificate - Qatar Petroleum
(Has attended Hydrogen Sulphide/ Breathing apparatus training)
Well known about Safety Standards Qatar Petroleum & Kuwait
Career Objective:
To be an effective and efficient team member of your esteemed
organization and to achieve organization and individual goals.
Seeking an increasingly responsible position in your Organization safety& career
2. development and challenging environment where my qualification, experience and
dedication can be utilized for the prospect of the organization
Professional Experience -
Total of more than 16 years experience at UAE, Kuwait, Qatar, & India
Skills and Strengths:
Preparation of procedures, quality plans, method statements, ITP and checklist.
Coordinate with consultants for material inspection and site work Inspection.
Testing and inspection of concrete and preparation and maintaining of reports
Coordinating & conducting third party test & submitting reports to PMC &
Engineering.
Setting out & checking of Survey Controlling Points & Establishing the points to
different locations.
Erecting & Casting the Pre-cast Concrete Piles. Checking the alignment of piles,
beams & Slabs.
Preparing schedule records and reports
Maintains a digital photo data base of the site to meet record requirements
Preparation and issuance of non conformance reports and field trouble report
together with the proposal for corrective and preventive action.
Preparation of daily, weekly and monthly reports.
Prepares punch/snag list for rectifications
Preparation of final handover dossier.
Work History:
7.Punj Lloyd - Cuddalore Jan 4th
2015 to till date
Designation : QA/QC Engineer
Project : 2x600 MW ITPCL THERMAL Power Plant Project –
Cuddalore (Substations, Trenches and transformer
Foundations, chimney)
Client : IL & FS
Consultant : FICHTNER INDIA
3. Roles & Responsibilities:
.
Implementation of QA/QC activities including those of sub-contractors works in
accordance with approved QCP /ITPs and Procedures, method statements and other
contract documents..
Maintaining records of calibration, inspection and testing equipment.
Maintaining the latest revision of all Contract Documents, Drawings, and Client
Specifications required for Quality Assurance, Quality Control and inspection.
Ensure that the company complies to the requirements of ISO 9001: 2008 standards
Witness procedures, tests and certify the results.
Initiate timely corrective action and preventive actions on NCR, customer complaints
Ensure that all related inspection and testing activities with regards to Environment,
Health & Safety procedures and maintenance rules are respected.
Prepare the test packages as per each line specs according to codes and standards.
Ensure that activities assigned are implemented as per plan.
Prepare daily, weekly and Monthly progress report as per QA/QC documents.
Resolving and overseeing technical issues related to Quality & safety with client and
subcontractors to facilitate project progress.
Makes as built of modified Civil structural and architectural as per site and makes
final as built with design depart.
Maintained a record of all the inspections process in accordance to the procedures.
Preparation of Punch list on job completion and closing Punch list for final completion
and handing over to client as per IFC, As Built / Red Line Drawing and following the
PID Specifications.
6.Kharafinational – Kuwait June 10th
2012 to Nov 8th
2014
Designation: QA/QC Inspector
Project : MEW- supply& installation of 20 no’s 132/11KV Substations
Transformer foundations at Abufatira & Sabah al Ahmed –
Kuwait
Client : MEW (Ministry of Electricity and Water)
Roles & Responsibilities:
Checking all structural and civil works if it is complying in accordance with the
approved plans, Technical Submittals, specification and standards.
Review and understand drawings, specification & Survey reports prior to start of
inspection at site
4. Ensure that the company complies to the requirements of ISO 9001: 2008
standard
Form works – survey checked, orientation, location (coordinates) site elevation,
clean and oiled if required chamber straight and level, plumpness and adequate
supports and bracings.
Rebar works – Grade, size, splices, spacing, clearance, cleanliness and
covering.
Embedment – pipes, conduits, and ground wire/earthling and water stop.
Anchor Bolts – Diameter, length, type, location, projection per survey report, if
anchor bolt sleeves, thread, projection and follow in between tolerance.
Water Stop Installation all kinds of water stopper for water tight construction
areas
All the inspections conducts were as per the ITP and specification and standards.
Ensure all test reports were conducts as per the specification and standards
Updating all the incoming and outgoing drawings for the quality issues
Maintaining all the test reports and other reports etc.,
Familiar With ASTM, BSEN, BS, Municipality standards & Project specs.
Preparing request for inspection (RFI) to be submitted to the Client
Preparing daily, weekly and monthly activities update and QC Reports
Daily site Inspection to the Execution of works
all the documents such as Test Reports (concrete, steel etc.,) which are to be
submitted and to be included in my monthly QC reports
Preparing the final inspection and testing before handing-over the Project.
Coordinate with office Engineer to prepare method of statement and ITP
inspection plan
Issues NCR and surveillance control measure, if issues as early as possible to
comply
5.Kharafinational – Kuwait June 19th
2011 to May-2012
Designation: QA/QC Inspector
Project : KOC - Construction of Ahamadi Guest House & Governor
House & ARWA Industrial Building, Substations &
Machine Foundations – Ardiya- Kuwait
Consultant : SSH
Client : KOC
5. Roles & Responsibilities:
Preparation of Procedures, Quality Plans, Method Statements, ITP & checklist
Ensure that the company complies to the requirements of ISO 9001: 2008 standard
Directly reporting to QA/QC Manager.
In constant liaison to our Consultant, Client and Supplier
Directly responsible for reviewing documents pertaining to QA/QC.
QCP, ITP, Checklist, Forms, Method Statement, Test Report.
Involve in supplier assessment e.g. Concrete, Rebar and others
Directly responsible for all testing done on site ,as well as coordinating all test to
the3rd party laboratory
Monitoring of all testing activities from various materials e.g.
soils, concrete and steel.
Controlling all documents pertaining to material test and procedure.
Close liaison with the clients and consultants for all activities pertaining to the said
project
Preparation and issuance of NCR reports and field trouble report together attend
quality audit meeting.
Review for approval supplier and sub contractor Inspection report
Submit monthly/weekly QA/QC report
4. Eastern International –
Dubai
Feb 14th
2007 to March 2011
Designation : QA/QC Engineer
Project : Bradenton Project, substations & multistory
Building Dubai Sports City
Consultant : WSP Structural & Godwin Austen Johnson-Charted
Architects,
Duties & Responsibility:
Ensure that the company complies to requirements of ISO 9001 : 2008 standard
Direct reporting to QA/QC Engineer & Project QC Manager
Reviewing QC document & ITP’s
Reviewing project Civil ITR’s
6. Implementation of QA/QC activities including those of sub-contractors works in
accordance with approved QCP / ITPs and Procedures, method statements and
other contract documents.
Technical assistance to the Sub-Contractors.
Issues the Punch List Point to Contractors
Inspection Concrete precast yard work and Cast in Situ including Rebar and its
form works.
Reviewing As-built drawings
Witness for Civil Laboratory work including, Concrete & Grout Compressive
strength test, Soil test & FDT
Inspection Concrete Batching Plant including equipment (Calibration) &
Concrete Raw material
Material Inspection as per Project Specification.
Preparing weekly Reports
Slump Test ,Casting & crushing of Cubes or Cylinder
3. Danem Engineering - Doha
Qatar
July 2006 to December 2006
Designation : QA/QC Engineer
Project : Industrial Building, Foundations & warehouse
Building
Consultant : QP (Qatar Petroleum)
Roles & Responsibilities:
Preparation of Procedures, Quality Plans, Method Statements, ITP and
System procedures.
Submission of Check/ Inspection request for all works on day to day basis.
Conduct site inspection together with the Consultant
Implementation of QC at site.
Preparation of daily, weekly reports.
Ensure that the company complies to the requirements of ISO 9001: 2008
standard
7. Dealing with various materials testing like aggregate, concrete, Steel etc and
field test like, field density, soil investigation, Compaction test , plate load test
etc.
Prepare Construction Methodology to be approved by Consultant prior to
implementation on site
Preparation and issuance of NCR and proposal for corrective and preventive
action
Prepares punch/snag list for rectifications
Maintains a digital photo data base of the site to meet record requirements
2. Danem Engineering Works FZE
Dubai
May 2005 to June 2006
Designation : QA/QC Inspector
Project : Warehouse Building & Substations & cable Trenches
Client : DEWA Electricity & water Authority
Role & Responsibilities
Construction of Precast elements for buildings.
Pretension pre-stressing of concrete elements such as beam slab.
Construction of Rafts and Heavy foundations.
Erection and installation of precast elements.
Preparation and issuance of NCR and proposal for corrective action.
Preparing the inspection reports and maintaining the documents and records.
Inspection of all construction activities at site like Foundations, Pre-cast column
and beams, manholes, RC Pits, Equipment Foundations, Grouting, Earth Work like
Excavation & backfilling, Road works and Survey.
Carryout field test of soil and concrete i.e. field density of earth, Concrete slump.
taking samples of soil for laboratory test.
1. Karuppaiya & Sons Limited-
CHENNAI- INDIA
August 2000 To April 2005
Designation : QC Inspector
Project : RO Plant chemplast sanmar limited karaikkal-Indi
Role & Responsibilities
Quality control inspections at site and assure that they are being done as per the
QA/QC procedures and specifications.
8. Co-ordination of all inspections with the contractor and client QA/QC engineers.
Inspection of earth works such as trench for pipelines and cable trenches, dune
sand bedding backfilling etc ditches concreting activity for precast concrete
elements for pipe racks, foundations for equipment’s and supports, utilities such
as manholes , etc. and paint of structures above the ground and below the
ground(concrete surface only) .
Preparation and issuance of NCR reports and proposal for corrective and
preventive action.
Ensure that the company complies with the requirements of ISO 9001:
2008 standards.
Preparation of documents of all inspections conducted at site and all relevant
quality documents as per the requirements of project quality plan.
Preparation of daily, weekly and monthly reports.
Punch list, commissioning, Handing over.
Personal Details:
Date of Birth : 04/03/1982
Passport No : Z 2689732
Date of Expiry : 17/12/2023
Place of Issue : Kuwait
Marital Status : Married
Languages Known : Tamil, English Hindi & Arabic
Computer Knowledge : MS Office Packages, (Word, Excel, Power Point,)
Diploma in AUTO CADD, Staad Pro V8i
Declaration:
I hereby declare that the above information is true and correct to the best of
my knowledge.
Date : Murugan