Renewable Energy Sources & Energy Conservation (RES&EC) Diploma mechanical Engg - M scheme - All Unit Introduction PPT

•Download as PPTX, PDF•

0 likes•150 views

Renewable Energy Sources and Energy Conservation - Diploma Mechanical Engineering - V Semester - III Year - All Unit Introduction Power point Presentation - Intro PPT Prepared By..... Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Google Scholar: https://scholar.google.co.in/citations?user=4E3rzVQAAAAJ&hl=en

43 July 2020 U.ARAVIND, LECT/MECH
Study about the fundamentals of energy
Study of constructions and principle of wind
energy, solar energy, tidal energy and bio
energy
Understand the PV design & its components
Understand the energy management and
auditing techniques
Study the energy conservation process

TOPICS
Fundamentals of Energy & Wind Energy
Solar Energy
Solar Photovoltaic System & Design ,
Ocean Energy, Tidal & Wave energy
Bio-Energy
Energy Management & Audit,
Conservation
3 July 2020 9U.ARAVIND, LECT/MECH

UNIT 1 – FUNDAMENTALS
OF ENERGY & WIND
ENERGY
Energy Resources
Importance of RES
Wind Machine types
Wind Energy Conversion
System
3 July 2020 10U.ARAVIND, LECT/MECH

UNIT – 2 SOLAR ENERGY
Solar Radiation
Solar energy Collectors
Solar thermal applications
Solar Thermal energy
storage
3 July 2020 12U.ARAVIND, LECT/MECH

UNIT – 3 SOLAR
PHOTOVOLTAIC SYSTEM
& DESIGN , OCEAN
ENERGY, TIDAL & WAVE
ENERGY
Solar PV Cells
Solar PV system design
Ocean Thermal Energy Conversion
Tidal Energy & Wave Energy
3 July 2020 14U.ARAVIND, LECT/MECH

UNIT – 4
3 July 2020 U.ARAVIND, LECT/MECH 16

Photosynthesis
Biomass Conversion
Biogas Production
Ethanol Production
Bio-Diesel Production
3 July 2020 17U.ARAVIND, LECT/MECH

UNIT – 5 ENERGY
MANAGEMENT & AUDIT,
CONSERVATION
Energy Audit
Energy Conservation
Energy Management
Energy Performance
3 July 2020 19U.ARAVIND, LECT/MECH

21
Thank You…..
3 July 2020 U.ARAVIND, LECT/MECH

Renewable Energy Sources & Energy Conservation - V Sem - III Year - Unit 4 Power point Presentation - Bio-energy Prepared By.... Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Google Scholar: https://scholar.google.co.in/citations?user=4E3rzVQAAAAJ&hl=en

Renewable Energy Sources & Energy Conservation (RES&EC) Diploma mechanical e...

ARAVIND U

Subject: Renewable Energy Sources and Energy Conservation Diploma in Mechanical Engineering - V Sem - III Year M Scheme - Unit 1 - Fundamentals of Energy and Wind Energy Power point Presentation Prepared By.. Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Google Scholar: https://scholar.google.co.in/citations?user=4E3rzVQAAAAJ&hl=en

Renewable Energy Sources & Energy Conservation (RES&EC) Diploma mechanical e...

ARAVIND U

Subject: Renewable Energy Sources and Energy Conservation Diploma in Mechanical Engineering - V Sem - III Year M Scheme - Unit 2 - Solar Energy Power point Presentation Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Google Scholar: https://scholar.google.co.in/citations?user=4E3rzVQAAAAJ&hl=en

Renewable Energy Sources and Energy Conservation 2 markspdf

ARAVIND U

Special Machine - Quiz -Unit 2

ARAVIND U

The Short and Long Term Peace Strategies: "Anglophone" Crisis, Cameroon

ijtsrd

Just like in Ethiopia, the unrest in the Republic of Cameroon is rooted in the countrys history, which dates back to many years. This paper seeks to analyze the institutional and attitudinal elements on the way forward for the restoration to normalcy of the state of affairs within the national territory. It is not a recipe for apportioning blames but of principles and options to a pacific settlement of disputes within the national territory. Maxwell N. Achu ""The Short and Long Term Peace Strategies: â€œAnglophoneâ€ Crisis, Cameroon"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23512.pdf Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/other/23512/the-short-and-long-term-peace-strategies-%C3%A2%E2%82%AC%C5%93anglophone-crisis-cameroon/maxwell-n-achu

Wind energy

Surendra Patait

Financial viability of solar power plant in Tamil NaduIshan Rohit

The March 11, 2011 disaster created the need to review Japan’s energy architecture. We believe that it will take about 10 years for Japan to fully decide on a new energy and electricity architecture, and it will take about 3 years to reach decisions on the future of Japan’s nuclear power generation. Japan has taken a careful approach towards the development of renewable power, and renewable power - except for hydropower - is substantially lower than in most other advanced countries. Japan’s potential for renewable energy is very high, especially wind and geo-thermal power, and will required substantial changes in laws and regulations, and a decentralized and democratic approach to grid management. Necessary liberalization of Japan’s electricity markets is in preparation, and we will see a rapid development of renewable energy. This report reviews the current situation and the future potential of renewable electrical power in Japan.

17. NECS 2016 _ Energy_ Evolving power situation and investment opportunities...

FICCINorthEast

Unit iv wind energy

Dr SOUNDIRARAJ N

IMPROVING ELECTRIC VEHICLE PERFORMANCE USING PHOTOVOLTAIC CELLS

HemantJangid20

This ppt represents the results of measuring the range and performance of the Electric vehicles as an alternative solution for fossil fuels based on previous work. It also presents the same measured parameters for the photovoltaic cells. A comparison between the two models has been done. It demonstrates a dynamic model of an electric vehicle and photovoltaic cell using the SIMULINK in MATLAB program.

19. NECS 2016 _ Energy- Way forward for solar and wind power in NE India -Pro...

FICCINorthEast

Proposal for a 2MW fspv system and e-transportAnkit Singh

Designof1 m wpfloatingsolarphotovoltaic

ssuser15aa85

SOLAR MISSION

sri lakshmi sai

Solar Panel Installation And Maintenance PowerPoint Presentation Slides

SlideTeam

World is moving towards a sustainable future and renewable energy is playing a vital role in achieving that goal. There are various sources of renewable energy but solar energy is dominant when it comes to meet both industrial and residential energy demand at low cost. This presentation will benefit the manufacturing organization that wants to optimize their energy consumption and electricity bill cost by shifting to solar energy. The presentation includes sections namely energy consumption analysis that will help the firm in defining its current electricity composition by resource, its daily, monthly and annual energy utilization rate, share of electricity demand in current year, energy star rating of current appliances and machineries and monthly electricity bill of the plant. Issues we are currently facing section will highlight the current challenges faced by the manufacturer in terms of machine downtime, energy consumption and Co2 emission. Firm can illustrate various solution along with their cost overview to counter their current challenges with help of Available solutions to counter energy issues section. Solar system overview section will help the firm in providing overview about solar system types and its applications along with system workflow. Permission and regulatory key considerations section will help the manufacturer to describe the essential permission and regulatory key consideration required for solar system installation. Manufacturer can provide detailed specification about the project, it objective and expected outcomes with the help of Project description and specifications section. Manufacturer can ensure the best quality of solar panels, mounting structure and inverter with decision making checklist for solar project section. Estimated cost of solar project section will shed a light on total cost required to install solar system. Implementation schedule will help the firm in illustrating the different stages to install solar system. Maintenance plan and schedule section will help the organization in maintaining the solar panel and inverter health. Manufacturer can portrays the stats of plant capacity per annum and electricity bill saving with impact on performance section. Risk and mitigation strategies section will help the manufacturer in illustrating possible risk that may occur during solar system installation and right measures to overcome them. Company can portray possible challenges that may arise while opting for solar energy and solution to overcome them with the help of barriers and solutions for solar energy application section. Finally, performance tracking dashboard will help the manufacturer in tracking plant electricity consumption, solar production and export to grid. https://bit.ly/2MP2gfF

Overview of Wind Energy

Jerilene

ENERGY SYSTEMS, ELECTRICITY AND FIRE SAFETY

Anchal Garg

Generation of Electricity by mounting Wind mill on moving vehicles for safe F...

theijes

In this fast world the demand for energy is ever increasing. With increase in energy production. There is heavy increase in pollution and depletion of fossil fuels they are going to extinct very soon, So the best way to save our nature and increase energy production is by using renewable energy. In this paper I am going to discuss about production of electricity through wind turbine mounted over a moving vehicle. We are implementing a very advanced H-Bridge converter for this conversion of alternate current produced by permanent magnet moving generator to direct current. The main reason for this paper is to explain about utilization of wind energy on a moving vehicle which is being wasted and to extract electricity without any fluctuations.

3 mwpv plant

Saritha999

Design and Implementation of a Solar Power System

ijtsrd

Energy is a very important variable that its conservation is of paramount interest to engineers of our time. As we know, the law of conservation of energy states that energy can neither be created nor destroyed, but it can be transformed from one form to another. This helps in sustainable use and protection of natural resources. This research work the Design and Implementation of a Solar Power System focuses on a technique of power generation from solar source. It provides simple basic theoretical studies of solar cell and its modelling techniques using equivalent electric circuits. Solar Photovoltaic PV power generation system is comprising several elements like solar cells, inverter, Battery charge controller and single phase inverter for AC loads are implemented in hardware in simple manner. Sylvester Emeka Abonyi | Kingsley Chibueze Obute | Anthony Amaechi Okafor "Design and Implementation of a Solar Power System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-3 , April 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49926.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49926/design-and-implementation-of-a-solar-power-system/sylvester-emeka-abonyi

Solar Energy Application: A Decade Review

IRJET Journal

What's hot

NMRESGI_Optimized Integration of PV with Battery Storage_Hawkins

Sandia National Laboratories: Energy & Climate: Renewables

Overcoming Duck Curve & Peak shaving using Energy Storage

Ravinder Soin

211 1022-3-pb

Roshdy Abdelrassoul

IRJET- Electrical Energy Generation by using Smart Solar Tracking System ...

IRJET Journal

Aoil floating solar power plant ppt 2015

Abhay Ocean India ltd.

CUTSE 2015 ECE02Alvin Goh

Jawaharlal nehru national solar mission

Dileep V Raj

Renewable energy in Japan

Gerhard Fasol

17. NECS 2016 _ Energy_ Evolving power situation and investment opportunities...

FICCINorthEast

Unit iv wind energy

Dr SOUNDIRARAJ N

IMPROVING ELECTRIC VEHICLE PERFORMANCE USING PHOTOVOLTAIC CELLS

HemantJangid20

19. NECS 2016 _ Energy- Way forward for solar and wind power in NE India -Pro...

FICCINorthEast

Proposal for a 2MW fspv system and e-transportAnkit Singh

Designof1 m wpfloatingsolarphotovoltaic

ssuser15aa85

SOLAR MISSION

sri lakshmi sai

Solar Panel Installation And Maintenance PowerPoint Presentation Slides

SlideTeam

Overview of Wind Energy

Jerilene

ENERGY SYSTEMS, ELECTRICITY AND FIRE SAFETY

Anchal Garg

Generation of Electricity by mounting Wind mill on moving vehicles for safe F...

theijes

3 mwpv plant

Saritha999

What's hot (20)

NMRESGI_Optimized Integration of PV with Battery Storage_Hawkins

Overcoming Duck Curve & Peak shaving using Energy Storage

211 1022-3-pb

IRJET- Electrical Energy Generation by using Smart Solar Tracking System ...

Aoil floating solar power plant ppt 2015

CUTSE 2015 ECE02

Jawaharlal nehru national solar mission

Renewable energy in Japan

17. NECS 2016 _ Energy_ Evolving power situation and investment opportunities...

Unit iv wind energy

IMPROVING ELECTRIC VEHICLE PERFORMANCE USING PHOTOVOLTAIC CELLS

19. NECS 2016 _ Energy- Way forward for solar and wind power in NE India -Pro...

Proposal for a 2MW fspv system and e-transport

Designof1 m wpfloatingsolarphotovoltaic

SOLAR MISSION

Solar Panel Installation And Maintenance PowerPoint Presentation Slides

Overview of Wind Energy

ENERGY SYSTEMS, ELECTRICITY AND FIRE SAFETY

Generation of Electricity by mounting Wind mill on moving vehicles for safe F...

3 mwpv plant

Similar to Renewable Energy Sources & Energy Conservation (RES&EC) Diploma mechanical Engg - M scheme - All Unit Introduction PPT

Design and Implementation of a Solar Power System

ijtsrd

Solar Energy Application: A Decade Review

IRJET Journal

CSE MODULE 1 2020 - Copy.pptx

AaaBbb827105

Design and Construction of a 20 000 Mah Wind Power Bank

ijtsrd

The study aimed to design and construct a portable wind power bank, using quantitative research method to profoundly explain the concept and define the problems that will make an improvement for the ideas in developing the project. One type of wind powered battery charging will be explored in this paper. This can be used in times of power interruptions, in the absence of electrical sources, during outdoor activities away from home where charging is a necessity, and most specially to save money by minimizing electrical consumption. It is designed to be installed fixed on home rooftops when at home but can be detachable and can be carried whenever necessary. It is an energy saving device for the reason that it may not need any external source of electricity. It consists of a wind turbine driving a generator and operates at variable speed. It consists of three different modules which are power supply module, power storage module and phone charging module. All these modules consist of different components that perform different functions. The power supply module consists of the components' physics, the principles and the design. The power storage module includes the components parameters responsible for the restoration of energy to the battery after it has been used to charge mobile phones. There is connecting port between the power bank power storage and charging module and the phone charging module through which it can be connected in order to recharge phones as well as to recharge the power bank from an AC source. This paper analyzes the property of the system components. The effect of parameter variation and the system configuration on the system performance are investigated. Ramon L. Pitao, Jr. | Sunny E. Araneta | Clifford Jan C. Dionson | Jaypee G. Gagarino | Ronald M. Famor ""Design and Construction of a 20 000 Mah Wind Power Bank"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23426.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23426/design-and-construction-of-a-20-000-mah-wind-power-bank/ramon-l-pitao-jr

Testing of a Microcontroller Based Solar panel Tracking System

iosrjce

IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.

M010637376

IOSR Journals

Solar Tracker in P.T.U E.P Department

ijtsrd

The main importance for this paper is that sixth year students can be used laptop and projector in presentation for their mini thesis though the light is off. As four 90W solar panel is connected in parallel, total power is 360W that is reliable for our loads. In this paper, the comparison between single axis and dual axis tracker radiation for Pyay District is expressed. Moreover, Ardunio program is applied for dual axis solar tracker. Myanmar is more suitable solar power to store energy in battery during sunny days as renewable. Dr. Zarchi San | Daw Pan Wint Hmone Htwe | Daw Kkhaing Wint ""Solar Tracker in P.T.U E.P Department"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23468.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23468/solar-tracker-in-ptu-ep-department/dr-zarchi-san

Optimization of PV Cell through MPPT Algorithm

IRJET Journal

IRJET- Review Paper on Residential Grid Connected Photovoltaic System using M...

IRJET Journal

Dual Axis Solar Tracking system

IRJET Journal

Design and Calculation of standalone system for Devon valley (TQ14 OEY) near ...

IRJET Journal

IRJET- IoT based Digital Charge Controller

IRJET Journal

RES & EC Unit 3 PPT - Solar Photovoltaic System and Design & Ocean Energy, Ti...

ARAVIND U

Thanks and Regards... Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Solar photovoltaic System and Design: Solar photovoltaic a brief history of PV,PV in silicon: basic principle, crystalline PV; reducing cost and raising efficiency, thin film PV, other innovative technologies, electrical characteristics of silicon PV cells and modules, grid connected PV system, cost of energy from PV ,Environmental impact and safety. System design of solar photovoltaic system: Load analysis-solar array Design-Battery Design-Simple formulas. System design procedure. Case Studies: Designing solar home lighting system - Designing stand alone solar PV Power plant - Designing solar PV water pumping system - Only arriving load capacity - solar array sizing - Battery sizing - Inverter capacity and mountings. Ocean energy, Tidal & Wave energy Ocean energy resources – principle's of ocean thermal energy conversion (OTEC) – Methods of Ocean thermal electric power generation – Energy utilisation – basic principle of tidal power – components and operations of tidal power plant – Energy and Power forms of waves – Wave energy conversion devices.

Rural electrification by Lakshmi.Nidoni-seminar ppt

lakshmi nidoni

ABSTRACT In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.

COMPLETEREPORT.pdf

HaiderAddewany1

Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure

ijtsrd

The utilization of sustainable power sources is ending up exceptionally essential because of the restricted stores of non-renewable energy sources and worldwide ecological worries for the creation of electrical power age and usage. In remote regions, towns, it is anything but difficult to get more sum biomass. Subsequently by the utilization of crossover frameworks comprising of Biomass and PV for creation of electrical vitality in these remote regions can be more temperate. On the off chance that the advancement of a PC based approach for assessing, the general execution of independent half and half PV-Biomass creating frameworks are broke down ,at that point these outcomes are helpful for creating and introducing cross breed frameworks in remote regions This paper centers the practical thought of independent crossover frameworks having PV and Biomass for electrical generation in remote zones. Additionally in this paper a reproduction approach has been recommended for planning remain solitary network for remote regions. The normal sun powered radiation and amount of biomass required information are to anticipate the general execution of the creating framework. The batteries can likewise be utilized as a part of this framework to store the additional vitality which can additionally be utilized for reinforcement. Likewise the additional power is utilized to supply to the network. Here the reproduction is completed utilizing HOMER programming. The outcomes and investigation can used to enhance the improvement of the proposed demonstrate. Vikash Pooniya | Mr. Pravin Kumar | Dr. Deepika Chauhan | Md. Asif Iqbal"Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11105.pdf http://www.ijtsrd.com/engineering/electrical-engineering/11105/hybrid-biomass-solar-power-system-with-establishment-of-raw-material-procure/vikash-pooniya

Design And Analysis of Buoyant Wind Turbine

IRJET Journal

Potential of using photovoltaic systems to power underwater fishing lights i...

IJECEIAES

The limited stock and uncertainty of fuel prices as a source of driving the main engine and generator on ships greatly affect the lives of fishermen in Indonesia. Even though there is a policy in the form of assistance from the government in the form of subsidies, fishermen still feel doubtful about being able to get such assistance. To overcome this and with the potential of solar energy in Indonesia, as well as a manifestation of appropriate technology and blue economy policies, a photovoltaic system is made that is combined with underwater lights as a fishing tool. Activities are carried out by measuring environmental conditions and the energy that comes out of the PV system and giving questionnaires to the fishermen. The results showed that the use of PV systems combined with underwater lights in fishing activities gave good results. The result of electrical energy that can be generated is 393.24 Wh/day and can meet the ship’s electricity needs for 4 days. This result is also supported by the Wilcoxon test results for technical, economic, environmental, health, and safety aspects with a significance value of 0.001 (p<0.05).

handbook-battery-energy-storage-system.pdf

SvnthLastDrv

BATTERY ENERGY STORAGE.pdf

MarifeAlcantaraCaira

Similar to Renewable Energy Sources & Energy Conservation (RES&EC) Diploma mechanical Engg - M scheme - All Unit Introduction PPT (20)

Design and Implementation of a Solar Power System

Solar Energy Application: A Decade Review

CSE MODULE 1 2020 - Copy.pptx

Design and Construction of a 20 000 Mah Wind Power Bank

Testing of a Microcontroller Based Solar panel Tracking System

M010637376

Solar Tracker in P.T.U E.P Department

Optimization of PV Cell through MPPT Algorithm

IRJET- Review Paper on Residential Grid Connected Photovoltaic System using M...

Dual Axis Solar Tracking system

Design and Calculation of standalone system for Devon valley (TQ14 OEY) near ...

IRJET- IoT based Digital Charge Controller

RES & EC Unit 3 PPT - Solar Photovoltaic System and Design & Ocean Energy, Ti...

Rural electrification by Lakshmi.Nidoni-seminar ppt

COMPLETEREPORT.pdf

Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure

Design And Analysis of Buoyant Wind Turbine

Potential of using photovoltaic systems to power underwater fishing lights i...

handbook-battery-energy-storage-system.pdf

BATTERY ENERGY STORAGE.pdf

More from ARAVIND U

Production and Quality Management(PQM) - Unit 4 PPT - Chapter 1 : Topic Stati...

ARAVIND U

Production and Quality Management(PQM) - Unit 4 PPT - Chapter 1 : Topic Statistical Fundamentals - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 Production and Quality Management(PQM) - Unit 4 PPT - Chapter 2 : Topic Control charts X bar & R Chart - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 020-Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Unit 4 PPT - Chapter 2 : Topic Control charts X bar & R Chart Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Unit 4 PPT - Chapter 1 : Topic Stati...

ARAVIND U

Production and Quality Management(PQM) - Unit 4 PPT - Chapter 1 : Topic Statistical Fundamentals - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 Production and Quality Management(PQM) - Unit 1 PPT - Chapter 3 : Topic Process Selection - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 020-Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Unit 4 PPT - Statistical Fundamentals Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Unit 3 PPT - Chapter 1 : Topic : M7 ...

ARAVIND U

Production and Quality Management(PQM) - Unit 3 PPT - Chapter 1 : Topic : Q7 Tools - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Unit 3 PPT - Q7 Tools Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Unit 3 PPT - Chapter 1 : Topic : Q7 ...

ARAVIND U

Production and Quality Management(PQM) - Unit 2 PPT - Basic Concepts of TQm -...

ARAVIND U

Production and Quality Management(PQM) - Unit 2 PPT - Basic Concepts of TQm - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 020-Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Unit 2 PPT - Basic Concepts of TQM Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Unit 1 PPT - Chapter 3 : Topic Proce...

ARAVIND U

Production and Quality Management(PQM) - Unit 1 PPT - Chapter 3 : Topic Process Selection - Diploma 4th Semester - Mechanical Engineering - N Scheme - 4020440 020-Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Unit 1 PPT - Process Selection Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Unit 1 PPT - Chapter 2 : Topic Proce...

ARAVIND U

Production and Quality Management(PQM) - Unit 1 PPT -Chapter 1 : Topic Produc...

ARAVIND U

1020-Diploma in Mechanical Engineering - 4020440- IV Semester - Production and Quality Management - Introduction - Syllabus PPT Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Thermal Engineering-I Unit 4 PPT - Performance of IC Engines PPT N Scheme III...

ARAVIND U

Thermal Engineering-I Unit 3 PPT -Internal Combustion Engines PPT N Scheme II...

ARAVIND U

Thermal Engineering-I Unit 2 PPT - Heat Transfer PPT N Scheme III Sem Diploma...

ARAVIND U

Thermal Engineering-I Unit 2 PPT - Thermodynamic Air Cycle - Introduction & C...

ARAVIND U

1020-Diploma in Mechanical Engineering - 4020340- III Semester - Thermal Engineering I -Unit 2 :Thermodynamic Air Cycle - Introduction & Carnot Cycle PPT Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Thermal Engineering - I - Unit 1 Thermodynamics Process of Perfect Gases - N ...

ARAVIND U

1020-Diploma in Mechanical Engineering - 4020340- III Semester - Thermal Engineering I -Unit 1 :Thermodynamics Process of Perfect Gases - Second Half - PPT Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Thermal Engineering - I - Unit 1 Basics of Thermodynamics - N Scheme III Sem ...

ARAVIND U

1020-Diploma in Mechanical Engineering - 4020340- III Semester - Thermal Engineering I -Unit 1 : Basics of Thermodynamics - (First Half) PPT Prepared By… U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TAMIL NADU Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in

Production and Quality Management(PQM) - Introduction PPT - Diploma 4th Semes...

ARAVIND U

Special Machines Unit 1 PPT - Manufacturing of Plastic Components and Composi...

ARAVIND U

Thanks and Regards... Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in MANUFACTURING OF PLASTIC COMPONENTS Plastic Components: Types of plastics - Engineering plastics – thermosets – composite - structural foam, elastomers - polymer alloys and liquid crystal polymers. Factors Influencing the Selection Of Plastics - Mechanical properties – degradation - wear resistance - frictional properties - special properties –processing – cost Processing of Plastics: Extrusion-general features of single screw extrusion -twin screw extruders. Injection moulding types: Plunger type - Reciprocating screw injection - details of injection mould - structural foam injection mould - sandwich moulding - gas injection moulding - injection moulding of thermosetting materials - calendaring and rotational moulding. Design consideration for plastic components.Composite manufacturing: Introduction – characteristics of composite manufacturing - constituents – Glass fibers manufacturing process – hand laminating process – autoclave processing – filament winding – pultrusion process – liquid composite process – working principles by schematic diagram only – advantages – disadvantages.

Special machines Unit 3 PPT - Milling Machines and Gear Generating Process

ARAVIND U

Prepared by: Thanks and Regards... Mr. U. ARAVIND, B.E., M.I.S.T.E., LECTURER / MECHANICAL ENGINEERING LAKSHMI AMMAL POLYTECHNIC COLLEGE K.R. NAGAR, KOVILPATTI - 628 503 THOOTHUKUDI DISTRICT, TN Mobile No: 9943244068 Email Id: aravindulaganathanmech@gmail.com aravindmech@lapc.in Milling Machines: Types - column and knee type – plain - universal milling machine - vertical milling machine - principles of operation - specification of milling machines - work holding devices - tool holding devices - arbor - stub arbor - spring collet – adapter. Milling cutters: cylindrical milling cutter - slitting cutter -side milling cutter - angle milling cutter - T-slot milling cutter - woodruff milling cutter - fly cutter - nomenclature of cylindrical milling cutter. Milling operations: straddle milling - gang milling - vertical milling attachment. Indexing plate – differential indexing - simple indexing – compound indexing – simple problems. Generating Process: gear shaper - gear hobbing - principle of operation only. Gear finishing processes: burnishing – shaving - grinding and lapping - gear materials.

Special machines Unit 5 PPT- CNC Machines and Its Components

ARAVIND U

Special Machines Unit 4: Abrasive process & non-conventional machining process

ARAVIND U

Special Machines Unit 5: CNC Machines & its Components

ARAVIND U

More from ARAVIND U (20)