Dynamic Simulation for HFE & Control System Design ValidationGSE Systems, Inc.
This presentation explains how dynamic simulation can be used for human factors engineering and for control system design validation.
Digital instrumentation and control (I&C) and digital control rooms have become a key focus of the nuclear industry. Regulator must understand and validate these system designs and their performance in order to budget and schedule risk, and for safety.
For more information, go to www.GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/gsesystems. Thank for viewing!
Implementation of Dynamic Simulation for Engineering and Human FactorsGSE Systems, Inc.
Presented at SimWorld international energy conference in Dubai. For more information go to www.GSES.com, call +1 800.638.7912 or email info@gses.com. You can also follow GSE on Twitter @GSESystems and Facebook.com/GSESystems.
Mochovce Unit 3 & 4 Full-Scope Simulator Project Key Points and SuccessesGSE Systems, Inc.
This presentation highlights the key points and major successes during the project to simulate Mochovce Units 3 & 4. For more information, go to www.gses.com, follow GSE Systems on Twitter @GSESystems, or email info@gses.com. Thanks for viewing.
The presentation discusses innovations and progressions in nuclear simulation, from introduction of the technology in the 1970s to current real-time, high-fidelity models.
Virtual Commissioning and Real-Time Training for Increasing PerformanceGSE Systems, Inc.
This presentation discusses the gas conversion of an existing coal power plant and how using a high-fidelity simulator for virtual commissioning can increase plant performance and profits.
Dynamic Simulation for HFE & Control System Design ValidationGSE Systems, Inc.
This presentation explains how dynamic simulation can be used for human factors engineering and for control system design validation.
Digital instrumentation and control (I&C) and digital control rooms have become a key focus of the nuclear industry. Regulator must understand and validate these system designs and their performance in order to budget and schedule risk, and for safety.
For more information, go to www.GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/gsesystems. Thank for viewing!
Implementation of Dynamic Simulation for Engineering and Human FactorsGSE Systems, Inc.
Presented at SimWorld international energy conference in Dubai. For more information go to www.GSES.com, call +1 800.638.7912 or email info@gses.com. You can also follow GSE on Twitter @GSESystems and Facebook.com/GSESystems.
Mochovce Unit 3 & 4 Full-Scope Simulator Project Key Points and SuccessesGSE Systems, Inc.
This presentation highlights the key points and major successes during the project to simulate Mochovce Units 3 & 4. For more information, go to www.gses.com, follow GSE Systems on Twitter @GSESystems, or email info@gses.com. Thanks for viewing.
The presentation discusses innovations and progressions in nuclear simulation, from introduction of the technology in the 1970s to current real-time, high-fidelity models.
Virtual Commissioning and Real-Time Training for Increasing PerformanceGSE Systems, Inc.
This presentation discusses the gas conversion of an existing coal power plant and how using a high-fidelity simulator for virtual commissioning can increase plant performance and profits.
The Functional Mockup Interface: FMI overview
Modelica: a very brief overview
A Real-World Example: Active Grill Shutter Controls
Vehicle Thermal Management with Modelica
Continuous Validation of System Requirements
- Intermediate results from ITEA3 MODRIO project
Iterative Controller Development Using Modelica
Conclusions
Koch Modular Process Systems, LLC (Koch Modular) provides process control system and automation solutions for standalone turnkey applications or integration within a customer's existing PLC, DCS, or SCADA infrastructure. Koch Modular engineers work directly with the customer to design a custom solution specific to meet their plant, industry, standards, and needs. Koch Modular can also assist in modification of existing control systems to upgrade or integrate enhanced functionality.
Closing the Design Cycle Loop with Executable Requirements and OSLC - IBM Int...Modelon
Motivation: Systems Engineering and Modeling and Simulation need to converge
Open Standards we build on: Modelica, FMI, OSLC, SySML
An Ideal Process to Integrate Systems Engineering with Model Based Design
Continuous Integration to Close the Loop for Rapid Design Iterations
First Steps to Automate Requirements Formalization
Call to Action
Mechanical Simulations for Electronic ProductsAnsys
As electronic devices become smaller and more ubiquitous, the printed circuit boards and components that drive them face increasing power densities and evermore complexity. To ensure product reliability and performance, accurate and detailed analysis methodologies are necessary.
One single simulation model in development deployed broadly across organization is beneficial in order to reduce effort in maintenance, and to ensure consistency, and possibly multi fidelity.
To run simulation over multiple simulation environments one needs to separate the model from the execution environment.
Qualifying a high performance memory subsysten for Functional SafetyPankaj Singh
Addressing the Challenges of Safety verification for LPDDR4.
✓Avoid traditional approach of starting functional safety after functional verification : Iterative and expensive development phase
1. Functional Safety Need to be Architected and not added later.
2. Safety Analysis must start prior to implementation. ‘Design for safety/verification’
3. Reuse & Synergize : Nominal and Functional Safety Verification.
✓Fault optimization with formal and other techniques is necessary to overcome challenges with scaling simulation and analysis.
✓Integrated push button fault simulation flow is need of hour and saves verification engineers time.
✓Analog defect modelling and coverage can be performed based on IEEE P2427.
The Functional Mockup Interface: FMI overview
Modelica: a very brief overview
A Real-World Example: Active Grill Shutter Controls
Vehicle Thermal Management with Modelica
Continuous Validation of System Requirements
- Intermediate results from ITEA3 MODRIO project
Iterative Controller Development Using Modelica
Conclusions
Koch Modular Process Systems, LLC (Koch Modular) provides process control system and automation solutions for standalone turnkey applications or integration within a customer's existing PLC, DCS, or SCADA infrastructure. Koch Modular engineers work directly with the customer to design a custom solution specific to meet their plant, industry, standards, and needs. Koch Modular can also assist in modification of existing control systems to upgrade or integrate enhanced functionality.
Closing the Design Cycle Loop with Executable Requirements and OSLC - IBM Int...Modelon
Motivation: Systems Engineering and Modeling and Simulation need to converge
Open Standards we build on: Modelica, FMI, OSLC, SySML
An Ideal Process to Integrate Systems Engineering with Model Based Design
Continuous Integration to Close the Loop for Rapid Design Iterations
First Steps to Automate Requirements Formalization
Call to Action
Mechanical Simulations for Electronic ProductsAnsys
As electronic devices become smaller and more ubiquitous, the printed circuit boards and components that drive them face increasing power densities and evermore complexity. To ensure product reliability and performance, accurate and detailed analysis methodologies are necessary.
One single simulation model in development deployed broadly across organization is beneficial in order to reduce effort in maintenance, and to ensure consistency, and possibly multi fidelity.
To run simulation over multiple simulation environments one needs to separate the model from the execution environment.
Qualifying a high performance memory subsysten for Functional SafetyPankaj Singh
Addressing the Challenges of Safety verification for LPDDR4.
✓Avoid traditional approach of starting functional safety after functional verification : Iterative and expensive development phase
1. Functional Safety Need to be Architected and not added later.
2. Safety Analysis must start prior to implementation. ‘Design for safety/verification’
3. Reuse & Synergize : Nominal and Functional Safety Verification.
✓Fault optimization with formal and other techniques is necessary to overcome challenges with scaling simulation and analysis.
✓Integrated push button fault simulation flow is need of hour and saves verification engineers time.
✓Analog defect modelling and coverage can be performed based on IEEE P2427.
Human Performance improvement for the Turkish Energy SectorGSE Systems, Inc.
This presentation was given by GSE Systems at the 2015 Energy Istanbul conference. For more information, go to www.gses.com or follow GSE Systems on Twitter @GSESystems. Thanks for viewing!
This presentation discusses the use of serious gaming as a practical learning tool, especially or the millennial generation. It informs viewers on what serious games look like and what characteristics successful serious games have. You can visit GSE Systems at gses.com and on Twitter @GSESystems
This presentation addresses innovative simulation technology used to increase effectiveness of radiation training in the nuclear power industry. For more, go to www.gses.com and follow GSE on Twitter @GSESystemsInc.
This presentation introduces the ANS-3.5 working group and discusses the ANS-3.5-201x project status and the ANS-3.5 standards transition status. For more information on this topic, visit www.gses.com or contact info@gses.com. Thanks for viewing!
Proposal For a Nuclear Reactor Operations Course at Purdue UniversityGSE Systems, Inc.
This presentation discusses the reasons why there should be a class that applies theoretical nuclear engineering to reactor operations, potentially for the 2015/2016 college semester. For more informaiton on GSE Systems, go to www.gses.com and follow GSE on Twitter @GSESystems. Thanks for viewing!
Solving Refining & Petrochemicals Workforce Development Challenges with Perfo...GSE Systems, Inc.
This presentation introduces GSE's comprehensive performance improvement solutions for developing a highly skilled refining and petrochemicals workforce. For more information, go to gses.com or email info@gses.com.
This presentation discusses the tools used for simulation training before and after the Fukushima nuclear event. It also discusses the practicality of these new tools and what next steps should be taken for nuclear training. Visit gses.com and follow GSE Systems on Twitter at @GSESystems
This presentation provides an overview of GSE's simulator management course, including the situation, client needs, solutions provided, and course content.
For more information, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems.
Designing a High-Fidelity Full-Scope Training Simulator for a Triple-Pressure...GSE Systems, Inc.
This presentation describes the design and implementation of a high-fidelity, full-scope training simulator for a triple-pressure CCGT Power Plant. For more information, please visit GSES.com, email info@gses.com, or follow GSE on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
This presentation introduces GSE's comprehensive Entry2Expert human performance improvement solution for the oil, gas, refining and nuclear industries. For more information, go to gses.com or email info@gses.com. Thanks for viewing.
How to Improve Operator Training Throughput Using Screening & SelectionGSE Systems, Inc.
This presentation discusses the different reasons for poor operator training throughput and solutions for improving results and ROI. Selection best practices are discussed as well as examples of effective screening assessments. You can visit GSE at gses.com or on Twitter @GSESystems. Thanks for viewing.
Improving Operational Performance With Smarter, Cost-Effective Training ProgramsGSE Systems, Inc.
This webinar, presented in conjunction with Hydrocarbon Processing magazine, introduces a simulation-based training strategy that helps plant owners:
- Avoid risk and decrease cost
- Protect revenue
- Increase workforce agility
- Spend less while getting better results
- Get 80% of the learning at 20% of the cost
For more information, please visit www.envision-training.com.
ZNTutor-CFD is a tool to train beginners in complete CFD cycle. It provides hands on exposure to solutions of complex problems and provides innumerable parameters to experiment with CFD. It is powerful, yet simple to use.
Responding to Fukushima: Real-Time, Interactive, Beyond Design Basis Modeling...GSE Systems, Inc.
Presented at The Nuclear Training and Simulation China Forum in Beijing. This presentation discusses the use of interactive modeling and simulation to address post-Fukushima nuclear workforce training challenges. For more information, go to www.gses.com or call 800-638-7912. You can also follow GSE Systems on Twitter @GSESystems and on Facebook.com/GSESystems. Thanks for viewing!
Applying Safety DNA Analytics to Enhance Your E2E Workforce ProcessGSE Systems, Inc.
This presentation introduces the concept of Safety DNA and how companies can use this model to create safer, more productive work environments - as well as enhance the Entry2Expert training process. For more information, go to gses.com and follow GSE on Twitter @GSESystems
This presentation shares his insights on design simulation and the new role of the simulator in Simulator Assisted Engineering. For more information, go to GSES.com, email info@gses.com, or call 800-638-7912. You can also follow GSE at @GSESystems and Facebook.com/GSESystems.
The Benefits of using Dynamic Simulation and Training SystemsRisman Hatibi
SimSci OTSs have been used worldwide on large-scale projects for not only
thoroughly checking the control system configurations in integrated systems before they are applied
to the actual plant, but also for training the operators, instructors and plant management in how
to best operate their facilities.
Functional verification is one of the key bottlenecks in the rapid design of integrated circuits. It is estimated that verification in its entirety accounts for up to 60% of design resources, including duration, computer resources and total personnel. The three primary tools used in logic and functional verification of commercial integrated circuits are simulation (at various levels), emulation at the chip level, and formal verification.
Bringing Engineering Analysis Codes Into Real-Time Full-Scope SimulatorsGSE Systems, Inc.
Presented at the 2013 Nuclear Simulation and Training China Forum in Beijing. For more information on GSE's real-time simulators and engineering capabilities, go to www.gses.com, follow GSE on Twitter @GSESystems and connect on Facebook.com/GSESystems
In the design of electronics and semiconductors, challenges are compounded by the integration of AI, multi-core, real-time software, network, connectivity, diagnostics, and security. Performance limits, battery life, and cost are adoption barriers. It is extremely important to have tools and processes that deliver efficiency throughout the design cycle.
Continuous verification from planning to development addresses the multi-discipline needs of hardware, software, and networks. This unique approach accelerates the design phase, defines the test efforts, and finds defects during specification. Architecture modeling is required to meet timing deadlines, generate the lowest power consumption, and attain the highest Quality-of-Service. optimize the electronic design system and designing of custom components.
Engage with...Romax | Driving the Electric Revolution WebinarKTN
Romax Technology, part of Hexagon’s Manufacturing Intelligence division, provides world-leading solutions and expertise in multi-physics analysis and electro-mechanical design, working dynamically and collaboratively to make a global difference.
Increasing ROI Through Simulation and the 'Digital Twin'GSE Systems, Inc.
Learn how you can use the plant simulator as a digital twin to maximize your investment and get beyond operations training into engineering design and virtual commissioning.
It‘s Math That Drives Things – Simulink as Simulation and Modeling EnvironmentJoachim Schlosser
You can benefit from Simulink, the software that Engineers love for doing their work
Engineers in industries like Aerospace, Automotive, Energy production, Industrial Machinery, Automation, Railway and many others use Model-Based Design with Simulink for an increasing amount of their applications. Simulink allows you to…
gain knowledge about the dynamics of your system and have a direct path to implementation
use the modeling language that most engineers speak.
Math underpins all Systems. Simulink is Math made real.
Whatever domain your system incorporates: It is likely that mathematics plays a part of it. For example, Simulink covers domains like:
Continuous time, Discrete time, Discrete event
State machine, Physical models, Text based algorithms
System environment, Digital hardware, Analog/RF hardware
Embedded software, Mechanical systems
MATLAB & Simulink provide a unified environment for all.
Functional testing those systems uses simulation and formal methods.
Begin to use Simulink for engineering mechatronic systems now.
Find ways to look at the system you could not do before, and save time in your development
Simulink is industry standard for engineering controls, signal processing.
Ask someone who already uses Simulink
Get a deeper insight on mathworks.com/model-based-design/
During conference, reach me at Twitter @schlosi
IBM ALM for aviation safety compliance aerospaceImran Hashmi
Check out more info at https://hashmi.ca
Challenges in Aviation Engineering
IBM Engineering platform for Aerospace/Defense
Engineering Lifecycle Management Solution for A&D capabilities
Deeper Dive: Accelerating Industry Compliance for Aerospace:
ARP4754 and DO178C
Summary and additional resources
Choosing the right process improvement tool for your project.
Learn how an experienced engineer decides when simulation is the right tool for his projects,
and when it isn't.
With the evolution of process improvement software, it can be difficult to decide the right tool for the job. Using something too powerful and complex can be a lengthy and unnecessary process, but underestimating the depth of analysis required and choosing something too simplistic early in a project can result in repeated work later.
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...Soham Mondal
Identified huge error count and US$1.7M excess expense in product engineering and product development; Spearheaded from scratch product roadmap and end-to-end engineering and deployment of a custom novel software for automatic creation of error-free verification infrastructure for a customizable Network-interconnect, across 6 global teams, saved 70+ man hours per integration and testing cycle and reduced time-to-first-test by 60%, resulting in an estimated annual savings of US$4.5M in purchased product licenses and 100% reduction in error-count in engineering process. Enabled a 4-member cross-cultural global team in Seoul for 6+ months for E2E-auto-testbench product during its’ adoption, prototype testing, and life cycle. Conducted 120+ user interviews, market analysis, customer research to define key product requirements for new features resulting in 100% user adoption, 80% increase in user satisfaction. Received appreciation award from VP of Engineering, Samsung Memory Solutions.
Disclaimer: - The slides presented here are a minimised version of the actual detailed content/implementation/publication presented to the stakeholders.
If the originals are needed, they will be provided based on mutual agreement.
(All Rights Reserved)
Similar to Real-Time Simulation for Design of New Nuclear Plants (20)
Hyperspring Implementation of BWROG EP/SAG CONTE 2019GSE Systems, Inc.
GSE subsidiary Hyperspring presentation given at CONTE 2019. The presentation was on the implementation of the BWR owners group emergency operating procedures and severe accident guidelines and was given by Hyperspring's Rick Shindel
GSE Second Simulator Address Plant Training Needs CONTE 2019GSE Systems, Inc.
GSE presentation given at CONTE 2019. The presentation was a recap of the project to build new simulators for Southern Nuclear and was given by GSE's Michael Battaglia.
GSE presentation given at 2019 Power Plant
Simulation Conference. The presentation was about the Onyx –RELAP and Onyx Control platforms and was given by GSE's Michael Battaglia.
This presentation was given by GSE at the Petroleum & Chemical Industry Council (PCIC). It discusses different tools and technologies available to prevent arc flash hazards. Experiments and results are discussed. For more information, go to www.gses.com. Thanks for viewing.
This presentation discusses the challenges with workforce attrition and the skills gap in the energy industry, and presents simulation-based solutions to help meet talent requirements. E2E = Entry2Expert solution for human performance improvement.
For more information on GSE's tools for severe accident management and preparedness, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
This presentation describes potential simulator model changes as a result of the accident at Fukushima Daiichi Nuclear Power Plant.
For more information, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
High-Fidelity Operator Training Simulator for CCGT Implemented Before Plant C...GSE Systems, Inc.
This presentation highlights a project in which a high-fidelity operator training simulator was implemented in a North American combined cycle power plant prior to commissioning.
For more information, go to GSES.com, email info@gses, and follow us on Twitter @GSESystems and at Facebook.com/GSESystems. Thanks for viewing!
Fossil Power Simulator Efficiencies When Using Automated TestingGSE Systems, Inc.
This presentation discusses methods for fossil power simulator implementation efficiencies when using automated testing. It includes information on automated plant procedures and scenario-based testing, as well as comments from real engineers who used the scenario-based testing.
For more information, visit GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
E-learning, 3D and Simulation for Competency DevelopmentGSE Systems, Inc.
This presentation explains how GSE's e-learning, 3D and simulation training tools help solve the problems that facility and training managers deal with; Risk, Revenue, Agility and Cost. This was presented at the 1st Global Oil and Gas Simulation and Training Forum. For more info, please visit GSES.com, email info@gses.com, and follow us on Twitter at @GSESystems and Facebook.com/GSESystems
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Welocme to ViralQR, your best QR code generator.ViralQR
Welcome to ViralQR, your best QR code generator available on the market!
At ViralQR, we design static and dynamic QR codes. Our mission is to make business operations easier and customer engagement more powerful through the use of QR technology. Be it a small-scale business or a huge enterprise, our easy-to-use platform provides multiple choices that can be tailored according to your company's branding and marketing strategies.
Our Vision
We are here to make the process of creating QR codes easy and smooth, thus enhancing customer interaction and making business more fluid. We very strongly believe in the ability of QR codes to change the world for businesses in their interaction with customers and are set on making that technology accessible and usable far and wide.
Our Achievements
Ever since its inception, we have successfully served many clients by offering QR codes in their marketing, service delivery, and collection of feedback across various industries. Our platform has been recognized for its ease of use and amazing features, which helped a business to make QR codes.
Our Services
At ViralQR, here is a comprehensive suite of services that caters to your very needs:
Static QR Codes: Create free static QR codes. These QR codes are able to store significant information such as URLs, vCards, plain text, emails and SMS, Wi-Fi credentials, and Bitcoin addresses.
Dynamic QR codes: These also have all the advanced features but are subscription-based. They can directly link to PDF files, images, micro-landing pages, social accounts, review forms, business pages, and applications. In addition, they can be branded with CTAs, frames, patterns, colors, and logos to enhance your branding.
Pricing and Packages
Additionally, there is a 14-day free offer to ViralQR, which is an exceptional opportunity for new users to take a feel of this platform. One can easily subscribe from there and experience the full dynamic of using QR codes. The subscription plans are not only meant for business; they are priced very flexibly so that literally every business could afford to benefit from our service.
Why choose us?
ViralQR will provide services for marketing, advertising, catering, retail, and the like. The QR codes can be posted on fliers, packaging, merchandise, and banners, as well as to substitute for cash and cards in a restaurant or coffee shop. With QR codes integrated into your business, improve customer engagement and streamline operations.
Comprehensive Analytics
Subscribers of ViralQR receive detailed analytics and tracking tools in light of having a view of the core values of QR code performance. Our analytics dashboard shows aggregate views and unique views, as well as detailed information about each impression, including time, device, browser, and estimated location by city and country.
So, thank you for choosing ViralQR; we have an offer of nothing but the best in terms of QR code services to meet business diversity!
2. GSE Systems, Inc.
•
Profile
–
–
–
–
–
–
–
–
•
World leader in advanced simulator solutions and training programs
World leader in Nuclear Simulation
Vertical markets: nuclear, fossil, oil & gas, chemicals
Over 1,100 installations for 160 customers in 48 countries
Founded in 1929, IPO in 1994
Headquartered in Sykesville (Baltimore), Maryland
280 employees in 8 locations in 5 countries
Annual revenue of $40M+
Relevance to our customers
–
–
–
–
Culture of working with customer to solve problems
Strong project management process and on-time delivery record
Depth of staff and breadth of knowledge so there is no single point of failure
Customer choice for first-of-a-kind projects
Fossil –
Coal
O&G
Refinery
Nuclear
Power
Training
Centers
Training
Technology
2
3. Global Reach
(HQ) Baltimore, MD
St. Mary’s, GA
Cary, NC
Madison, NJ
Americas
Belgium
Bulgaria
Czech Republic
Denmark
Finland
France
Germany
Italy
Kazakhstan
Norway
Beijing, China
Chennai, India
Africa / Middle East
Europe
Argentina
Brazil
Canada
Chile
Mexico
Puerto Rico
United States
Venezuela
Nyköping, Sweden
Stockton on Tees, UK
Poland
Russia
Slovakia
Spain
Sweden
Switzerland
The Netherlands
Ukraine
United Kingdom
Asia / Pacific
Algeria
Angola
Egypt
Libya
Nigeria
Oman
Pakistan
Qatar
Saudi Arabia
South Africa
United Arab Emirates
Australia
China
India
Indonesia
Japan
Korea
Malaysia
Singapore
Taiwan
Turkmenistan
Philippines
Papua New Guinea
3
4. Emphasis on Energy & Process
Extensive Global Installations
–
–
–
–
Nuclear Power (160+)
Thermal (Fossil Fuel) Power (140+)
Oil & Gas and Refining (40+, 180+)
Chemicals & Petrochemical (60+, 100+)
Full-Scope Simulators
4
6. What is a Simulator?
•
Feels like the real plant
•
Sophisticated algorithms precisely
represent the physical phenomena of
the plant
•
Simulated plant controls or integrated
DCS control system
•
Fossil – Coal-Fired
Instructor station controls the simulator
exercises
Process – Desalination
Nuclear Control Room
6
9. Blended Learning & Simulation
Products
The right training solution
for the right step of the
learning process
Full-Mission Simulators
Configurable Part-Task &
Procedures Trainers
Integrated Models with 3D
Instructor-Led Training
3D Maintenance Trainers
Self-Paced Tutorial
9
10. VIZSIM3D – Current Applications
Generic Flow Loop
Glass Models
Part-Task
Part-Task
Training
Training
Fundamentals/ Part-Task Training
Part-Task Training
Team Training
10
12. New Role of the Simulator
Holistic Engineering Verification and Validation (V&V) Platform
– Solves system design issues in integrated “plant” environment
Controls System Design and V&V Platform
– Real-time HD simulator provides first holistic view of plant
– Validation and refinement of logic and control strategies:
• key value of simulator
Human Factors Engineering Platform
– Supports design of DCS interface, alarms, electronic procedures, etc.
– Supports design of digital control rooms, information layout and CONOPS
– Demonstrates viability of these designs to regulator (show me)
Operating Procedure and Training Material Development Platform
Traditional goal is an ANS 3.5 simulator for training and licensing operators
12
13. GSE First-of-a-Kind Engineering Simulator
Experience
SMART
Korea
Atomic
Energy
Research
Institute
Westinghouse AP1000
NuScale Power
Pebble Bed Modular
Reactor
HYH CPR-1000 HFE
and Control V&V
Platform
Ultra Supercritical
Korea
B&W
mPower
Engineering
and HFE
Simulator
JMTR Test Reactor
13
14. USNRC – HFE Simulators
Upgrade and convert existing
simulator with Digital Human
System Interface
– RELAP5-HD Primary Model
– Digital Control Room
Interface
HSI Simulator
– Generic PWR
(ANS 3.5 Simulator)
– Vpanel Interface Platform
– Developing Digital HSI
14
15. High-Fidelity Predictive Models
•
Idaho National Lab RELAP5-3D
–
•
Real-time version of the industry standard reactor
transient analysis code
Studsvik Simulate3-K Neutronics Model
–
Real-time version of the Simulate3 fuel analysis code
•
EPRI’s MAAP5 – Severe Accident Model
•
GSE’s High-Fidelity Modeling Tools
–
–
–
–
JTopmeret: Two-Phase BOP System Modeling
JControl: High-Fidelity Control Modeling
JElectric: High-Fidelity Electrical System Modeling
JDesigner: Flexible HSI Development Environment
Key! Predictive models are necessary for
engineering simulators.
15
16. Simulator Value Proposition
1.
Platform for integrated system design validation
- Debug system designs and interoperation early in engineering process
1.
Control strategy design/validation
- Real-time platform for control engineering validation
1.
HMI/control room human factors engineering (HFE)
2.
Operating procedure validation
3.
Control systems validation (simulation)
4.
Plant demonstration to regulator and customers (marketing value)
5.
Becomes a training platform (long-lead item)
16
17. NUSCALE Background
The real-time simulator will
be the platform for both the
development and
demonstration of this new
plant control room approach.
• HFE and platform for
demonstration of CONOPs to
NRC for exemption
• Control system design and
V&V platform
• Simulated assisted
engineering (SAE) platform
• Training (critical path to
plant operation)
17
18. HFE and SAE Simulator
Engineering-Grade Primary Models
•
•
RELAP5
S3R
Remaining dynamic systems use
GSE’s near engineering models
• Jtopmeret
• JElectric
18
19. HFE and SAE Simulator
NuScale engineers
develop controls and
logic, basic control
screens, and operating
procedures
•JControl
•Jdesigner
System design data is
validated on
high-fidelity models
• Steady-state and
transient conditions
•System performance is fed
back to system design
engineers via JStation
19
20. Simulator Value Proposition
1.
Platform for integrated system design validation
–
1.
Debug system designs and interoperation early in engineering process
Control strategy design/validation
–
Real-time platform for control engineering validation
1.
HMI/control room human factors engineering (HFE)
2.
Operating procedure validation
3.
Control systems hardware and software validation (simulation)
4.
Plant demonstration to regulator and customers (marketing value)
5.
Enable the provision of a training platform earlier
20
21. SimWorld - Dubai, November 12-13, 2012
Industries
•
•
•
•
Nuclear
Fossil
Oil & Gas
Desalination
Topics
•Next-generation training
•Use of simulation beyond training
•3D training technology
•Establishing a training infrastructure
•University-industry collaboration
21
22. For more information:
Go to:
www.GSES.com
Follow us on:
Call:
+1 800.638.7912
Twitter @GSESystems
Email:
info@gses.com
Facebook.com/GSESystems