Ramesh C. has over 8 years of experience in piping stress analysis, support engineering, and construction coordination for oil, gas, and petrochemical projects. He has worked on projects in India and globally for companies such as Amec Foster Wheeler, Reliance Energy, and Dodsal Engineering. His responsibilities have included stress analysis of critical piping lines, support design, load calculations, and coordination between design, fabrication, and construction teams. He has extensive knowledge of stress analysis software including CAESAR II, SPR, Navisworks, ANSYS, and PROE.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
Sr. QA/QC Mechanical Engineer with 8 years experience in power plant, oil and gas.
Industrial Project QA/QC Mechanical Head professional with 8 years of experience from the well-recognized organizations in the field of Industrial Inspection, Quality assurance, Quality control, Welding inspection and conformity Assessment of products and services.
Expertise in conducting receiving, in process and final inspection for achieving enhanced Quality. Having good working experience as a Third party inspector for SGS industrial services.
Distinctively been a Internal auditor for ISO 9001:2008 Quality management systems. Self-directed, team-oriented, enthusiastic & possessing solid organizational skills.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
Sr. QA/QC Mechanical Engineer with 8 years experience in power plant, oil and gas.
Industrial Project QA/QC Mechanical Head professional with 8 years of experience from the well-recognized organizations in the field of Industrial Inspection, Quality assurance, Quality control, Welding inspection and conformity Assessment of products and services.
Expertise in conducting receiving, in process and final inspection for achieving enhanced Quality. Having good working experience as a Third party inspector for SGS industrial services.
Distinctively been a Internal auditor for ISO 9001:2008 Quality management systems. Self-directed, team-oriented, enthusiastic & possessing solid organizational skills.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
The important points of composite materials are mentioned. This file includes, what is composite materials, its classifications, applications, advantages and disadvantages.
Stress Analysis Method , special points to be checked and understood by Piping engineers, Civil and Structural Engineers and especially by Stress Analysis Engineers.
Josef Haik MD MPH, Eyal Winkler MD, Nimrod Farber MD, Moti Harats MD, Oren Weissman MD
Department of Plastic and Reconstructive Surgery and The Burn Unit, Sheba Medical Center
ISRAEL
EWMA 2013 - Ep468 - Corrective treatment of deformities in diabetic foot pati...EWMAConference
Vučetić Č1,2, Borović S4, Delić J3, Jeremić J2,5, Tulić G1,2, Manojlović R1,2,
Ukropina B1, Karović B1, Carević Z1
1Clinic for Orthopaedic Surgery and Traumatology, Clinical Centre of Serbia, Belgrade, Serbia
2Faculty of Medicine, University of Belgrade, Serbia
3City Institute for Skin and Venreal Diseases. Belgrade, Serbia
4Institute for Cardiovascular Diseases 'Dedinje’ Belgrade, Serbia
5Clinic for Plastic Surgery, Clinical Centre of Serbia, Belgrade, Serbia
EWMA 2013-Ep437-APPLICATION OF BIOGEGRADABLE WOUND DRESSINGS IN TREATMENT OF ...EWMAConference
APPLICATION OF BIOGEGRADABLE WOUND DRESSINGS IN TREATMENT OF CHILDREN WITH DEEP BURNS.
Vera Soshkina1, Liudmila Budkevich1, Tatiana Astamirova1
1Moscow Scientific Institute of Paediatrics and Children Surgery (Moscow, Russia)
1. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
PIPING STRESS ENGINEER C. Ramesh
I am having more than 8 years of experience in the field of detailed design engineering and
construction coordination in piping with special exposure to piping stress analysis, support
engineering and MTO in the field of Oil & Gas Refinery and Petrochemical with both Indian
and global projects
• Identification of Critical lines in the overall project.
• Stress analysis and results interpretation of critical lines, which are connected to
the equipments like pumps, heat exchangers, vessels, columns, tanks, air
coolers, compressors, heaters, and flare Header lines.
• Stress analysis and results interpretation of the critical lines, which are operating
under the condition and simultaneously accounting of occasional loads like slug
flow, wind, seismic and relief valve reaction loads.
• Nozzle loads evaluation of pump suction and discharge by using API610.
• Stress analysis and results interpretation of jacketed piping.
• Spring hanger schedule preparation & support engineering.
• Nozzle loads evaluation of pump suction and discharge by using API610.
Experience
AMEC FOSTER WHEELER
Organization : Reliance Energy India Private Limited.
Client : Reliance Energy India Private Limited.
Project : Paraxylene train-4(Construction).
Designation : Senior Piping Stress Engineer.
Duration : Nov 2015 to till date.
Responsibilities:
• Site construction coordination between design & fabrication team for units like pipe
rack, isomerization, refrigeration. transalkylation and aromatics areas.
• Site relevant support issues and missed out designs drawing all those issues have
been solved on the spot.
Organization : Amec Foster Wheeler India Private Limited.
Client : Lyondall basell Corpus Christi, TX.
Project : Christi Debottle Necking Project
Designation : Senior Piping Stress Engineer.
2. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
Duration : June 2015 to till date.
Responsibilities:
• Stress analysis & support engineering, for modification and replacement of existing
critical lines, which are connected to Ethylene refrigerant flash drum, inter stage flash
drum, gland steam condenser, propylene refrigerant compressor and turbine.
• Critical line list updating and checking.
• Structure loading to civil department.
• IFC Isometrics final clearance & client comments incorporation.
• Documentation & report preparation & coordination of stress activities.
Organization : Foster Wheeler India Private Limited.
Client : Reliance Energy India Private Limited.
Project : Paraxylene train-4.
Designation : Senior Piping Stress Engineer.
Duration : Nov 2013 to may 2015.
Responsibilities:
• Stress analysis & support engineering of critical lines, which are connected to Pumps,
horizontal vessels & vertical vessels drums.
• Stress analysis & support engineering of critical lines, which are connected to heat
exchangers, air coolers & columns.
• Stress analysis & support engineering of critical lines, which are in refrigerant
conditions.
• Critical line list updating and checking.
• Rack and Structure loading to civil department.
• IFC Isometrics final clearance & client comments incorporation.
• Documentation & report preparation.
DODSAL ENGINEERING AND CONSTRUCTION (INDIA) PRIVATE LIMITED
Organization : Dodsal Engineering and Construction (India) Private Limited.
Client : Dodsal Engineering and Construction (India) Private Limited.
Project : Habshan Sulphur Granulation Plant (HSGP),
Designation : Piping Stress Engineer.
Duration : Aug 2012 to Oct 2013
Responsibilities:
3. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
• Stress analysis of jacketed lines which are connected to pumps, vessels and tanks.
• Stress analysis of jacketed lines which are connected to launchers and receivers.
• Stress analysis of underground piping.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Shell C2C3 Piping
Client : M/s Jel Maintenance Pte Ltd, Singapore.
Designation : Piping Stress Engineer
Duration : May 2012 to July 2012
Responsibilities:
• Pipe thermal expansion loop calculation & pipe rack loading calculation.
• Pipe Stress analysis.
• Support engineering.
• Stress model updating and analysis as per IFC isometrics.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Paradip Refinery Project, (Delayed Coker unit).
Client : M/s Toyo Engineering India Ltd,
Designation : Stress Engineer
Duration : May 2011 to April 2012
Responsibilities:
• Critical Line List Preparation and system definition.
• Initial loading to civil department for initial designing of pipe rack, sleeper& structure.
• Detailed stress analysis of critical lines which are connected to pumps, heat
exchangers, horizontal and vertical vessels & columns.
• Report preparation and documentation.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Detailed Engineering Work for Polycrystalline Silicon Project.
Client : M/s Cover Industrial Plant Division, Italy.
Designation : Piping Stress Engineer
Duration : May 2010 to April 2011
Responsibilities:
• Critical line list preparation and system definition.
• Preliminary analysis and initial loading to civil for designing of pipe rack, structures.
• Stress analysis of critical lines, which are connected to fire water pumps & process
pumps.
• Stress analysis of critical lines, which are connected to horizontal vessels & vertical
4. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
vessels.
• Stress analysis of critical lines, which are connected to heat exchangers & columns
• Nozzle load evaluation of parallel pumps by using API-610.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : C-1305 Design and Engineering Services for N-Paraffine
Fraction.
Client : M/s TPL, Chennai.
Designation : Stress Engineer
Duration : Feb 2010 to April 2010
Responsibilities:
• Critical line list preparation and system definition.
• Preliminary analysis and initial loading to civil for designing of pipe rack, structures.
• Stress analysis of critical lines, which are connected to pumps.
• Stress analysis of critical lines, which are connected to horizontal vessels & vertical
vessels.
• Stress analysis of critical lines, which are connected to heat exchangers & columns
• Report preparation.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Bandar Abbas Gas Condensate Refinery Project, isomerization
Unit.
Client : M/s Shanul Farayand Co, Iran.
Designation : Piping Stress Engineer
Duration : FEB 2009 TO JAN 2010
Responsibilities:
• Critical line list preparation and system definition.
• Preliminary analysis and initial loading to civil for designing of pipe rack, structures
• Stress analysis of critical lines, which are connected to pumps.
• Stress analysis of critical lines, which are connected to horizontal vessels & vertical
vessels.
• Stress analysis of critical lines, which are connected to heat exchangers & columns
• Stress analysis of critical lines, which are connected to Air coolers.
• Report preparation.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : F1401R Inlet & Outlet Convection Section.
5. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
Client : M/s TPL, Chennai.
Designation : Job Engineer.
Duration : Dec 2008 to Jan 2009
Responsibilities:
• Preparation Line-list & Valve list, Material take-off.
• Loading Information to Civil Department.
• Isometric checking.
• Detailed stress analysis of heater inlet and outlet lines.
• Support engineering activities.
• Isometrics checking.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Polyester Industrial Yarn and Allied project.
Client : M/s SRF, Chennai.
Designation : Trainee Engineer
Duration : Sep 2008 to Nov 2008
Responsibilities:
• Preparation of Line-list & Valve list, Material take-off.
• Critical line list preparation and system definition.
• Stress modeling and analysis.
Organization : Dodsal Engineering and Construction (India) Private Limited.
Project : Pre bid Engineering for heavy Water Board Project.
Project : M/s Avasarala Technologies Ltd, Bangalore.
Designation : Trainee Engineer
Duration : July 2008 Aug 2008
Responsibilities:
• Preparation of Valve list, Material take-off.
• Isometric checking.
• Critical line list preparation & stress modeling.
Educational Qualifications:
M.E-CIM (CAD, CAM & CAE) Mechanical from PSG Tech Coimbatore, Tamil Nadu,
Passed in 2008
B.E- Mechanical Engineering from College Of Engineering Guindy, Chennai, Tamil Nadu,
Passed in 2005.
Software knowledge:
CAESAR II
SPR
NAVIS WORKS
ANSYS
PROE
6. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
Computer skills:
MS Office
Auto Cad
Declaration:
I hereby declare that the above mentioned information is true to the best
of my knowledge.
Truly Yours
Ramesh.C
7. Mail id : meshram220@gmail.com
Mobile no: 09677282237
Career Summary
Computer skills:
MS Office
Auto Cad
Declaration:
I hereby declare that the above mentioned information is true to the best
of my knowledge.
Truly Yours
Ramesh.C