Habeeb Omer is a mechanical engineer from India seeking a position as an MEP engineer. He has over 6 years of experience in infrastructure projects in Saudi Arabia and India. His experience includes planning, coordinating, and supervising plumbing, fire protection, drainage, and water supply systems. He is proficient in AutoCAD, MS Office, and has strong communication and teamwork skills.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
i have 2 year experiances in HVAC engineer.
• Having knowledge of Window ac, Split ac, AHU, FCU, Ductable ac, Package unit, Chilled water system,VRV/VRF unit.
• Selection of pipe sizing in chilled water system.
• Estimation of heat and load.
• Rechecking the Load calculations as per CFM done by the design engineers.
• Locating and analyzing pipe routing.
• Locating the Units and equipment placement as per their dimensions.
• Coordinating with Plumbers, Electricians, fire fighters and site engineers & contractors.
• Managing and costing the material used as per the site requirements.
• Handling the manpower and utilize in productive manner.
• Negotiating and managing the contractors as per cost and workdone.
• Creating final bill for the client and handing over the site.
A Mechanical Engineer specialized in HVAC & Project Management, experienced of working in Project Engineering, Maintenance and HVAC.
KEY SKILLS:
MEP, HVAC, Planning Engineering, Project Engineering & Management, On Site Management of Contractors, Risk Assessment & Safety Management, Permit to Work Management, Project cost and Estimation, Project Scheduling.
Please feel free to call me at my mobile number or email me. I look forward to our meeting.
Thank you for your time and consideration
9+ Years of Experience as 7+ years in Electrical Design and Site Engineer for MEP projects as well as 2 years worked as an Assistant Electrical Engineer in 220KV substation.
i have 2 year experiances in HVAC engineer.
• Having knowledge of Window ac, Split ac, AHU, FCU, Ductable ac, Package unit, Chilled water system,VRV/VRF unit.
• Selection of pipe sizing in chilled water system.
• Estimation of heat and load.
• Rechecking the Load calculations as per CFM done by the design engineers.
• Locating and analyzing pipe routing.
• Locating the Units and equipment placement as per their dimensions.
• Coordinating with Plumbers, Electricians, fire fighters and site engineers & contractors.
• Managing and costing the material used as per the site requirements.
• Handling the manpower and utilize in productive manner.
• Negotiating and managing the contractors as per cost and workdone.
• Creating final bill for the client and handing over the site.
A Mechanical Engineer specialized in HVAC & Project Management, experienced of working in Project Engineering, Maintenance and HVAC.
KEY SKILLS:
MEP, HVAC, Planning Engineering, Project Engineering & Management, On Site Management of Contractors, Risk Assessment & Safety Management, Permit to Work Management, Project cost and Estimation, Project Scheduling.
Please feel free to call me at my mobile number or email me. I look forward to our meeting.
Thank you for your time and consideration
9+ Years of Experience as 7+ years in Electrical Design and Site Engineer for MEP projects as well as 2 years worked as an Assistant Electrical Engineer in 220KV substation.
I am a highly motivated Mechanical Engineer with a Bachelor of technology B-tech (Mechanical Major) and Eight years of practical on-site experience. I am very interested in joining the engineering team.
In my current position as a Mechanical QA/QC Engineer at Pipelink Construction Pvt Ltd. I have developed key project management skills and the ability to improve communication with the broader project team. As I am required to ensure risk assessments are correctly implemented and current legislative and environmental guidelines are followed, successful communication is critical to my role.
I am very confident in planning inspection and executing projects using AutoCAD and Primavera. I enjoy the hands-on work, including checking the technical aspects of drawings and equipment designs and the maintenance of existing infrastructure.
I have a thorough knowledge of mechanical construction activities and I am experienced in directing and managing the on-site team, including contractors. I possess excellent interpersonal and communication skills and my multitasking abilities are advanced.
I working hard to keep projects running on time and within budget. I am keen to employ my skills and enthusiasm as an integral part of your team and I look forward to being able to discuss this position with you further.
A Civil Engineer with 8 years of vast experience in infrastructure like Metro Stations, Road, Tunnels, Bridges, Pipe Line projects for water transmission and High Rise Buildings. Experience in Structural detailed design & Shop drawings for structures of Metro Stations, Bridges, Roads and rail alignment drawings and geotechnical profile. Knowledge of construction methods and construction sequences in civil structural constructions above or below the ground. Sound Knowledge of Quality Management System. Knowledge in dealing with Quality Manuals, ITPs, NCR’s, Method statements & Inspection. knowledge of asphalt and concrete characteristics and working standards. Knowledge of International Standards & Codes (ASTM, ACI, AASHTO).
1. Habeeb Omer
MEP Engineer
CURRICULAM VITAE
HABEEB OMER
Mobile: 966-543972501
Email: habeebumar302@gmail.com / omer.saudiairlines@gmail.com
Position seeking : MEP Engineer
INFRASTRUCTURE
A challenging career in Mechanical Engineering involving constructions (Plumbing & Fire
Fighting, sewer, drainage, storm & water supply Infrastructure Technical coordination and
Site Supervision) and management development working in a team environment with highly
motivated colleagues.
Educational Qualification:
B.Tech Mechanical Engineer.(2009) Jawaharlal Nehru Technological University,
Hyderabad, India
6 years Experience infrastructure & Building Services
Professional Experience:
Period : May 2014 to till date.
Company : Saudi Arabian Parsons Limited. Jeddah (KSA).
Position : MEP Engineer
Project : Ministry of housing airport project Jeddah (KSA).
Period : May 2012 to May2014
Company : Saudi airline real estate development co. Jeddah (KSA).
Position : Mechanical Engineer
Project in Jeddah city
1. Cargo Services Building, JEDDAH
2. New Data Center At IT Building SV Compound Kandarah , Jeddah
3. S.V.CLUB, Jeddah (Phase-1), Saudi City Jeddah
4. Villas SAUDIA CITY JEDDAH
Page 1 of 3
2. Habeeb Omer
MEP Engineer
Period : Mar 2009 to Dec 2011
Company : Comfort Solution Hyderabad, (India)
Position : Mechanical Engineer
Project in India Hyderabad city
1. BITS PILANI (Birla institute of technology and science).
2. K. Raheja Constructions Group
3. Indian Terrain
4. R K Birla Farm House
Nature of Work:
Sewerage system, storm water, water supply & HVAC, fire fighting
Inspection for the construction, installation and pipe laying of Fiberglass Reinforced
Thermosetting Pipes (RTR) for firewater and oily water & Storm Water Drainage lines
including all of its metallic connections and fittings as per detailed drawing.
Installation & Inspection of RTR piping for Oily water drainage
Inspection of FRP manholes & Inspections Chambers as per standards & project
specifications.
Installation & inspection of HDPE piping for IRW,PW,FW,RW
Installation & Inspection of RTR piping up to 3.5M by coupling joints.
Installation & Inspection of Corrugated HDPE piping for Sanitary Sewer line.
Inspection of Layout and assembly of IRW,PW,RW,FW piping system
Preparation and review of Hydro test package for pressure testing of all type of water
supply systems.
Inspection of Water Hammer Arresters.
Material Inspection of HDPE,UPVC,CPVC,PVC and GRP/RTR
Material Inspection of valves/fittings as per project specifications.
Material inspection of lifting station and its installation inspection.
Installation & Inspection of Back flow Preventers at irrigation water piping
Inspection of duct installations.
Installation of Sewer lines UPVC & corrugated HDPE.
Inspection of DWV piping inside the building
Installation of Plumbing fixtures.
Inspection of storm water drainage systems & catch basins.
Page 2 of 3
3. Habeeb Omer
MEP Engineer
Inspection of water supply system with valve box and its instruments ( Valves/water
meters)
Fabrications & Erection (Piping/Structure)
Through knowledge of piping according to Standards.
Material inspection as per project specification and material test certificates.
Inspection of pipe spool marking, pipe cutting, and joint fit-up as per approved
construction drawings, WPS joint details and ASME B31.1/B31.3.
Dimensional Inspection of pipe spools prior to welding and after welding.
Erection of UG(Under Ground) piping
NDT control as per specification requirements.
PWHT control for Low Alloy Steel Materials.
Control of blasting and painting activities.
Witnessing piping hydro testing, flushing as per procedure.
Inspection of steel structural marking, cutting and fabrication per approved construction
drawing.
Having been involved in spool fabrication, erection and fit-up of spools and it’s
accessories as per Plant Piping Standard Procedure. Fabrication and erection /
installation of structural steels. Pressure testing, Pre-Commissioning, Punch list works,
Line Checking and Mechanical Completion Walk-down as per Project Specification.
Computer skills
Operating Systems: MS-DOS, WIN-98, 2000,7 & 8 XP
Tools: AutoCAD 2006/2013, MS-Office
Working collaborates with team members to achieve common goals while maintaining
Processing strong communication and interpersonal
Personal Profile:
Name : Habeeb Omer
Date of Birth : 21/10/1985
Page 3 of 3
