Nitin Lonkar is applying for the position of Piping Stress Engineer with over 13 years of experience in oil & gas, petrochemical, power and manufacturing industries. He has extensive experience performing piping stress analysis and design using CAESAR II software. Some of his project experience includes projects for BP Exploration, ZADCO, Gazprom, and Dong Chemical. He is seeking a challenging position where he can contribute to an organization with his technical skills and experience in piping stress analysis and design.
Briefly, I am Ashish Shrivastava (self employed), Piping stress engineer with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants. Please find my profiles attached here for your reference.
I would be grateful if you can consider my profile for Autocad plant 3D/ pipe stress analysis work that would like to outsource.
I also provide corporate trainings online/offline.
Briefly, I am Ashish Shrivastava (self employed), Piping stress engineer with 15+ years of experience. I have done wide range of stress analysis in different sectors like Offshore/onshore, Marine, LNG/LPG, Petrochemical, Solar/ Thermal powerplants. Please find my profiles attached here for your reference.
I would be grateful if you can consider my profile for Autocad plant 3D/ pipe stress analysis work that would like to outsource.
I also provide corporate trainings online/offline.
1. Date :
To,
Sub: Application for the post of Piping stress Engineer.
Respected sir,
Having brought to my consideration that there are some
vacancies in your organization for the above mentioned post. I hereby
submit my application for the same. Enclosed herein with are my
curriculum vitae.
I hope that you will consider my application favorably and I shall
sincerely appreciate the courtesy of an interview at your convenience.
Thanking you,
Yours faithfully,
______________
(Nitin.L. Lonkar)
2. CURRICULAME VITAE
NITIN LAXMAN LONKAR
BE (MECH) PIPING STRESS ENGR.
Total years of exp: 13+
EMAIL: find_nitin2001@yahoo.com Mb no: +919967634984
nitinlonkar@rediffmail.com
Career Summary:
Piping Stress Engineer with an experience of 13.4 years in Oil & Gas, Petrochemical, Power and
Manufacturing sector. Good exposure to Piping design & Stress Analysis (using CAESAR II) of
lines connected to Compressor,Turbine,Reactor,Heat exchangers,Boiler,Deaerator,Columns,
Pumps, Storage tanks, Rack Piping,FRP Piping with static Wind and Seismic analysis.
Experience of resolving the site queries. Handling project related activities and co-ordination with
other disciplines.
Familiar with code ASME 31.1, 31.3, ISO14692 & std.WRC107, WRC297, API610, API650, NEMA SM23
Objective: To pursue a career in the industry and work in the professionally managed co. to excel
my area of activities by taking a challenging assignment and contributing to the organization with a
personal goal.
Work Experience:
1. Working with Petrofac Engineering India pvt ltd. as a Sr. Piping stress Engineer.
Duration:-2nd
April 2012 to date.
Job profile: ●Have done Independtly stress analysis of lines connected to equipment like Compressor,
Heat Exchanger, Pump, Storage Tank, Separator, FRP Piping
Projects:
1. KHAZZAN CPF-(BP EXPLORATION LTD.)
●Stress analysis of line connected to Pump, Storage Tank, Degassing drum, Scruuber, Air-Cooler,
Rack piping, PSV lines.
● Issuing loads to civil.
2. ZADCO UZ750 Project Island Surface Facilities (EPC-2)
To increase the production of Upper Zakum Oil-field to 750 MBPD.
●Stress analysis of line connected to Pump, Separator, Rack piping. PSV lines.
● Issuing loads to civil.
3. Rabigh:
●Stress analysis of line connected to storage tank with API650.Interaction with Civil for piping loads.
4. Gazaprom, Badra, Iraque:
●Stress analysis of line connected to pump, Storage tank, Rack piping.FRP piping
●Manual supporting of non-critical lines, issuing loads to civil keeping minimum material requirement.
●Issuing IFC Isos with proper support tag.
2
3. 5. Dong Chemical: Proposal project.
Stress analysis of critical lines, manually suggesting routing to layout, issuing loads to civil.
2. Worked with Fichtner consulting Engineers (I) Pvt ltd. as an Assistant chief Engineer/ Piping stress
Engineer.
Duration:-21st
Feb 2011 to 30th
March2012
Company profile: A German base consultancy firm, dealing with power projects upto 1200MW
Job profile: ●Have done independtly stress analysis /review of lines connected to equipment like
Turbine, Boiler, Pump, Deaerator
Also done thickness calculation, pipe sizing calculation
Have developed PIPING SUPPORT STD. for the firm.
Project:
1. LANCO SOLAR POWER PLANT (2X100 MW), RAJASTHAN
2. BHEL THERMAL POWER PLANT (2X100MW)
3. Worked with Shaw & Rolta Ltd. as a Piping stress engineer 0n CAESAR-II 5.0 software
Duration:-18th
June. 2008 to 31st
Jan2011.
Job profile: ●Have done independtly stress analysis of lines connected to equipment like Reactor,
Turbine, Pump, Heat exchanger, Columns, Condensers, & line running on Pipe rack
●Preparation of critical line list. & System formation
●Static equivalent wind analysis. & Pipe spring specification.
●Preparation and issue of piping loads (critical & non-critical line) to Civil & Structural
●Development Of Piping Layouts as per Stress Requirement in Discussion with Process and Piping,
Co-ordination with Layout Group Regarding Supports and Routing Change as Per Stress
requirement.
●Manual supporting of non-critical lines.
●Preparation of special pipe support sketches & issue to layout dept.
●Checking & preparation of Spring log, SPS (Special Pipe Support) schedule. MCS (miscellaneous
Concrete Support) & pipe support tag on drawings issued for construction.
●Document management and data sharing with different department in the project taskforce
●Have done independtly analysis of line up to maximum temp of 450 degree C & line size upto 72”.
●Have done WRC107, WRC297, API610, NEMA SM23
Project:-
1.SPT OLEFIN RECOVERY PROJECT,EXXON MOBILE,SINGAPORE
It is the Singapore parallel Train Olefin Recovery Project. It is based on Shaw’s Ethylene technology.
It will Produce 1.8 Million TPA
3
4. 2. HOKU POLYSILICON MATERIALS,CANADA
Done Stress analysis of lines connected to Reactor, Pump, Heat exchanger, Drum
3. GAIL(INDIA) LTD. 6 TH FURNACE PROJECT
Was involved as a Reviewer for all analyzed lines of the project
4. RASTANURA INTEGRATED PROJECT. AT JUBAIL
It was feed project. Have done hand drawn Piping isometric sketches to prepare MTO.
4. Worked with Reliance Inds.Ltd. As a Piping stress engineer 0n CAESAR-II 5.0 software on
deputation basis (as an employee of Flexitech consultants.)
Duration:-1st
Aug. 2007 to 15th
June 2008
Job profile: Performing independently stress analysis of Flare/IBR line of
●Medium pressure steam, Low pressure steam, Low pressure condensate. upto temp of 420 C
●Support mark-up & checking of the stress isometrics., issued for construction.
●Final checking of MTO. IBR documentation.
●Project:- RELENE RELOCATION, GANDHAR.
No. of Stress Engr:- Myself only.
Reporting directly to: - Vice President, Project/ H.O.D, for system approval. (who is basically Stress
Engr.)
5. Worked with Flexitech Consultants as a Piping stress engineer 0n CAESAR-II 4.4 software
Duration:-1st
September 2006 to 30 th
July 2007.
Company profile: - A Consultancy firm, specialist in providing stress solutions to the refinery,
chemical & oil industries.
Job profile: Performing stress analysis of various critical systems such as
●Lines connected to rotating equipment like Pump, Heat exchanger, Columns, Condensers,
IBR line using ASME codes
●Preparation of critical line list.
●Static equivalent wind & seismic analysis.
●Pipe spring specification.
●Involve in Pipe Supporting activities and stress analysis documentation.
6. Worked with Goma engineering Pvt. ltd. as a Production Engineer
Duration: 9th
April 2004 to 18 th
August 2006
Company profile: An ISO 9001 certified co. which designs, develops, manufactures & exports high
pressure reciprocating pumps & homogeniser. Undertakes turnkey projects of dairy, beverage plant.
Job profile: To plan daily production activities. To handle technical problem.
4
5. To achieve production target as per schedule. To maintain departmental records.
Have hands on experience of assembly & maintenance of pumps upto 1500 bar & homogeniser upto 5000
LPH.Also have hands on experience of production of juice processing and dairy milk plant.
7. Worked with KNK ship management as a Shore base Engineer.
Duration: 1st
Jan 2003 to 15th
Sep 2003
Job profile: Handling maintenance activities of following vessels.
M.T.dolphin-one, Engine bhp-3240, Pielstick. M.V.ganesh-one, Engine bhp-1000, Blackstone.
M.T. kusboo, Engine bhp-800, Greaves.
Depending upon technical & mechanical requirements ensure along with shore base staff that ships are
functioning properly & are complying with quality control laid down under ISO rule.
Have hands on experience of operation & maintenance of engine, generator, pumps compressor, purifier.
8. Worked with Canter engineering as a Project Engineer.
Duration: 10th
Nov. 2001 to 15th
Dec. 2002.
Job profile: ● To get the work in time as per customer requirements.
● Co-ordinates with other sites and sources for machinery.
● To closely associate and meet client frequently.
● To achieve billing target on monthly basis.
Project completed: a) Installation and erection of power generator with 16’’ & 8’’ piping erection.
b) Installation and erection of domestic pump with piping. at ITC hotel ,parel ,Mumbai.
Educational Details:
Passed BE in Mechanical engineering with Second class, 59% in June-2001from Lokmanya Tilak
Coll. of engg, Navi Mumbai, Mumbai University.
Passed H.S.C with First class, 71.17 %( PCM: 86%) in March-96 from C.H.M. Coll. of Arts, Science
& comm.Ulhasnagar, Mumbai board.
Passed S.S.C with Distinction, 82.42% in March-93 from M.M.M Secondary & primary school,
Ulhasnagar, Mumbai Board.
Personal Details:
Date of Birth: - 17th
March 1978
Gender: - Male
Maritial Status: - Married
Language Known: - English,Hindi, Marathi
Passport No: K-8912520
Address: - F-1205, Cypress, Vasant Valley, Khadakpada, Kalyan,
5