Chetan Patil has over 11 years of experience as a piping designer. He has worked on projects for companies like Black & Veatch, Jacobs Engineering, Reliance, and Foster Wheeler. His responsibilities have included piping modeling, layout design, support selection, isometric drawing, and interdepartmental coordination. He is proficient in PDS, SmartPlant Review, and other modeling software. His objective is to be an integral member of an organization and ensure his services are always needed.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
This resume summarizes Surendra Babu Tellakula's professional experience as a piping engineer with over 13 years of experience in piping design and engineering for oil and gas projects. He has worked on numerous offshore projects in various roles including as a lead piping engineer and module lead. His experience includes tasks such as piping layout design, detail engineering, support modeling, technical evaluations, and inter-discipline coordination. He also lists his educational qualifications and references.
This document is a curriculum vitae for Vipul Raghunath Vichare, summarizing his experience and qualifications as a Senior Piping Engineer. He has over 13 years of experience in piping layout engineering and design, including roles with companies like Dodsal Engineering, Reliance Industries, and Toyo Engineering India. He holds a Bachelor's degree in Chemical Engineering and additional qualifications in piping engineering. His experience includes piping layout and design, project coordination, site experience, and working on various oil and gas, petrochemical, and refinery projects around the world.
Ashwin Mahale is a piping layout engineer with over 6 years of experience in oil and gas and water industries. He has extensive experience in piping design, 3D modeling, and developing piping layouts, plot plans, and equipment drawings. He is proficient in software such as Solidworks, AutoCAD, Microstation, and Plant Space DesignSeries. He held positions at various companies such as Enventure Technology Service, QuEST Global Engineering, and Unit force Technology, working on projects for clients in industries including hydrogen recovery, natural gas, water treatment, and oil/water separation.
Sukanta Dalai has over 13 years of experience in piping design for oil and gas projects. He has expertise in developing piping layouts, equipment arrangements, isometric drawings, and conducting nozzle orientation. Some of the key projects he has worked on include an oil collection station in India, a diesel storage facility in Indonesia, and an LPG terminal in Tanzania. Currently he works as a piping designer for IOT Infrastructure & Energy Services Ltd. handling both domestic and international projects.
Anil Lande_Piping Material Engineer(12+yrs exp)Anil Lande
This document is a 3-page curriculum vitae for Anil Haribhau Lande. It includes personal details like his date of birth and contact information. It outlines his educational qualifications including a post-graduate diploma in piping engineering and a bachelor's degree in mechanical engineering. It also lists his technical skills and over 12 years of work experience in roles like piping material engineer. It provides details of current and previous employers and projects he has worked on.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
Sandip Karmakar has over 5 years of experience managing piping fabrication, erection, and commissioning projects in India and Bangladesh. He has expertise in piping design, material procurement, budgeting, scheduling, and ensuring quality standards. Currently, he is the Site Execution Engineer for a 360 MW power plant project in Bangladesh, overseeing fuel oil and fire protection piping installation.
Veerakamu C. is a senior piping engineer with over 15 years of experience in piping design for petrochemical, refinery, and power plant projects. He has extensive experience in piping modeling, isometric drawing generation, material take-off, and coordination. Some of his project experiences include the CFP2020 project in Kuwait for KNPC, the Nghi Son Refinery project in Vietnam, and the Wasit Gas Plant project in Saudi Arabia. He is proficient in piping software such as PDS, SP3D, AutoCAD, and MicroStation.
This resume summarizes Surendra Babu Tellakula's professional experience as a piping engineer with over 13 years of experience in piping design and engineering for oil and gas projects. He has worked on numerous offshore projects in various roles including as a lead piping engineer and module lead. His experience includes tasks such as piping layout design, detail engineering, support modeling, technical evaluations, and inter-discipline coordination. He also lists his educational qualifications and references.
This document is a curriculum vitae for Vipul Raghunath Vichare, summarizing his experience and qualifications as a Senior Piping Engineer. He has over 13 years of experience in piping layout engineering and design, including roles with companies like Dodsal Engineering, Reliance Industries, and Toyo Engineering India. He holds a Bachelor's degree in Chemical Engineering and additional qualifications in piping engineering. His experience includes piping layout and design, project coordination, site experience, and working on various oil and gas, petrochemical, and refinery projects around the world.
Ashwin Mahale is a piping layout engineer with over 6 years of experience in oil and gas and water industries. He has extensive experience in piping design, 3D modeling, and developing piping layouts, plot plans, and equipment drawings. He is proficient in software such as Solidworks, AutoCAD, Microstation, and Plant Space DesignSeries. He held positions at various companies such as Enventure Technology Service, QuEST Global Engineering, and Unit force Technology, working on projects for clients in industries including hydrogen recovery, natural gas, water treatment, and oil/water separation.
Sukanta Dalai has over 13 years of experience in piping design for oil and gas projects. He has expertise in developing piping layouts, equipment arrangements, isometric drawings, and conducting nozzle orientation. Some of the key projects he has worked on include an oil collection station in India, a diesel storage facility in Indonesia, and an LPG terminal in Tanzania. Currently he works as a piping designer for IOT Infrastructure & Energy Services Ltd. handling both domestic and international projects.
Anil Lande_Piping Material Engineer(12+yrs exp)Anil Lande
This document is a 3-page curriculum vitae for Anil Haribhau Lande. It includes personal details like his date of birth and contact information. It outlines his educational qualifications including a post-graduate diploma in piping engineering and a bachelor's degree in mechanical engineering. It also lists his technical skills and over 12 years of work experience in roles like piping material engineer. It provides details of current and previous employers and projects he has worked on.
Amol Sawant (Piping Engineer with 10 years experience) docxAmol Sawant
Amol Sawant is a senior piping engineer with 10 years of experience in refineries, oil and gas, and fertilizer projects. He has experience managing teams of 5-8 people and fulfilling roles such as layout designer, PMC engineer, and ISO coordinator. He is proficient in SmartPlant Review, Navisworks, PDS, Caesar II, and other piping software. His most recent roles include working as a piping engineer for Medgulf Construction in Qatar and Tecnimont ICB in India.
Sandip Karmakar has over 5 years of experience managing piping fabrication, erection, and commissioning projects in India and Bangladesh. He has expertise in piping design, material procurement, budgeting, scheduling, and ensuring quality standards. Currently, he is the Site Execution Engineer for a 360 MW power plant project in Bangladesh, overseeing fuel oil and fire protection piping installation.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Muhammad Ali is a piping engineer currently working for SPEC Energy DMCC in Dubai. He has over 5 years of experience in designing and engineering piping systems for oil and gas projects. Some of his major projects include the Gambat South Gas Processing Facility in Pakistan and the Crude Oil Processing Facility for Hunt Oil's Ain Sifni project in Iraq. He holds a BSc in Mechanical Engineering and is proficient in various piping design software such as AutoCAD Plant 3D, Cadworx, and CAESAR II.
Steve Athan has over 26 years of experience in piping and layout design engineering, predominantly for oil and gas and petrochemical projects. He has managed teams of up to 100 personnel on multiple projects globally. Athan specializes in conceptual design, detailed design, and field engineering. He has extensive experience developing projects in Australia, Southeast Asia, China, Europe and the Middle East.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
This resume summarizes the qualifications and experience of P. Vinoth Kumar, a civil engineer from India. He has over 10 years of experience in quality control and assurance roles on large infrastructure projects in the Middle East and India. He holds a Bachelor's Degree in Civil Engineering and has received various industry certifications. Currently he works as a Lead QA/QC Inspector on an offshore oil and gas project in Abu Dhabi.
Sudeshna Ghosh is seeking a career opportunity where she can apply her skills in electrical design, tender preparation, and customer coordination. She has over 10 years of experience designing power transformers up to 100MVA at Schneider Electric and Bharat Bijlee. Some of her achievements include successfully executing Schneider Electric's highest rating export job of 95MVA to Nigeria and developing Bharat Bijlee's highest rating transformer design of 160MVA. She is proficient in AutoCAD, SAP R/3, and aims to enhance her knowledge and skills while contributing value to an organization.
Pintubhai Dilipbhai Darji has over 11 years of experience as a piping engineer working on projects for companies like Saudi Aramco, GS Engineering, and Shell. He has expertise in piping layout, 3D modeling, engineering management, and working according to various international codes and standards. The document provides details on his educational background and work experience on various projects in Saudi Arabia, Egypt, India, and Singapore.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Padmanabh M. Dhobale is a senior piping engineer with over 11 years of experience in piping design and 3D modeling. He has extensive experience leading the design of piping systems for major projects in countries like Kuwait, Oman, Egypt, India, and the UAE. Some of his responsibilities include developing overall piping layouts, finalizing nozzle orientations, designing pipe rack layouts, performing stress analysis, and ensuring design compliance. Currently he works as a senior piping engineer at DODSAL Engineering & Construction Pte. Ltd. in Dubai, where he is the lead engineer for the piping system on the EWTIP project in Kuwait.
The document is a cover letter and resume from an applicant for a QA/QC Engineer position. The applicant has over 13 years of experience in civil engineering and QA/QC projects in construction and gas industries. He has expertise in civil works, quality control, construction engineering, planning, and health and safety. His experience includes supervising buildings, roads, substations, and he is proficient in AutoCAD.
Chandramohan P has over 18 years of experience in pipeline and piping design. He has worked on numerous oil and gas projects in India, the Middle East, and Iraq. Some of his responsibilities include preparing pipeline alignments, crossings, layouts, and isometric drawings; developing engineering data; and assisting the drafting team. He is proficient in AutoCAD, Microstation, and other software.
Jaspreet Singh Khiva is a mechanical engineer currently working as a Plant Engineer for Jaiprakash Power Ventures Ltd. He has over 8 years of experience in engineering roles for turbine and generator maintenance, installation, commissioning, and operations. He is seeking new opportunities to enhance his technical and commercial skills while working in a challenging environment.
V. Prabu is seeking a position as a Technical Personnel with over 13 years of experience in piping design for oil, gas, and petrochemical projects. He has extensive experience using software like PDMS, PDS, AutoCAD, and reviewing tools. His responsibilities have included equipment modeling, piping modeling, support selection, isometric drawing preparation, and coordinating with other departments. He holds a Bachelor's degree in Mechanical Engineering and resides in Chennai, India.
Bharathkumar has over 13 years of experience as a piping and pipeline designer. He has worked on oil, gas, and petrochemical projects in Oman, Italy, India, and Singapore. His responsibilities include preparing piping layouts, isometric drawings, material takeoffs, and fabrication drawings. He is proficient in AutoCAD, PDMS, Navisworks, and other piping design software. Bharathkumar holds a Diploma in Mechanical Engineering and safety certifications.
Jestin Parekadan is seeking a position that allows him to utilize his 6 years of experience in project management and controls for power projects. He has a B.E. in Electrical Engineering and is currently working as a Planning Engineer for Emirates Electrical Engineering in Chennai. Previously he held roles as a Project Controls Engineer and Planning Engineer for Larsen & Toubro on various thermal power projects in India. He is proficient in scheduling software like Primavera and resource planning.
Sachin Patil has over 13 years of experience in design and engineering of static equipment. He is currently working at Reliance Industries Limited as a Mechanical Static Equipment Engineer. Previously he has worked at United Heat Transfer Pvt Ltd, Positive Metering Pumps & Systems, and OHM Engineers in roles involving design, engineering, procurement, and project execution of equipment like heat exchangers, pressure vessels, columns, and tanks for oil, gas, petrochemical and other process industries. He has expertise in standards like ASME, TEMA, and familiarity with materials like carbon steel, stainless steel, and alloys.
Manish Gupta has over 10 years of experience as a mechanical engineer working on projects in the oil, gas, fertilizer, and chemical industries. He holds a BE in Mechanical Engineering and has worked for several engineering companies, including Samsung Engineering India and GS E&C India. His experience includes conceptual design, engineering, procurement, and project management. He is proficient in design software such as COMPRESS, PVelite, CodeCale, and AutoCAD.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking a senior role. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the projects and packages he has worked on include heat exchangers, vessels, columns, reactors, and flare and boiler systems. He is proficient in engineering software and international codes and standards.
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.ASHISH KUMAR
Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking senior level assignments. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the major projects he has worked on include the Banyu Urip LNG Development Project, South Mahakam Field Development Project, and Saudi Kayan Olefins Plant Project. He is proficient in engineering software such as PvElite, CODECAL, and COMPRESS.
Mr. Mahabir has over 20 years of experience in piping design and engineering. He has extensive expertise in process piping design for offshore petrochemical facilities, having worked on over 15 projects for Fluor and other companies in Trinidad and Tobago. His responsibilities include conceptual design, detailed design, 3D modeling, and project support functions. He is proficient in AutoCAD, PDS, and other piping design software.
Mohd Shadab is an AutoCAD draftsman seeking a position where he can utilize his skills in producing accurate 2D drawings and illustrations for engineering projects. He has over 5 years of experience in architectural and electrical drafting. His expertise includes creating structure drawings, installation diagrams, shop drawings, and foundation designs. Mohd Shadab is proficient in AutoCAD and collaborating with engineers to develop technical drawings according to specifications. He is eager to take on new responsibilities and continue expanding his drafting abilities.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Muhammad Ali is a piping engineer currently working for SPEC Energy DMCC in Dubai. He has over 5 years of experience in designing and engineering piping systems for oil and gas projects. Some of his major projects include the Gambat South Gas Processing Facility in Pakistan and the Crude Oil Processing Facility for Hunt Oil's Ain Sifni project in Iraq. He holds a BSc in Mechanical Engineering and is proficient in various piping design software such as AutoCAD Plant 3D, Cadworx, and CAESAR II.
Steve Athan has over 26 years of experience in piping and layout design engineering, predominantly for oil and gas and petrochemical projects. He has managed teams of up to 100 personnel on multiple projects globally. Athan specializes in conceptual design, detailed design, and field engineering. He has extensive experience developing projects in Australia, Southeast Asia, China, Europe and the Middle East.
Anas M. H is a mechanical engineer with 6 years of experience in piping engineering projects. He has worked as a Piping Supervisor at Drydocks World in Dubai and as a Piping Engineer at Cochin Shipyard Limited in India. He has experience managing piping projects for shipbuilding and ship repairs. Anas is knowledgeable about piping design codes and standards like API, ASME, and ANSI. He is skilled in project planning, material procurement, fabrication, testing and commissioning of piping systems. Anas holds a Bachelor of Technology degree in Mechanical Engineering.
This resume summarizes the qualifications and experience of P. Vinoth Kumar, a civil engineer from India. He has over 10 years of experience in quality control and assurance roles on large infrastructure projects in the Middle East and India. He holds a Bachelor's Degree in Civil Engineering and has received various industry certifications. Currently he works as a Lead QA/QC Inspector on an offshore oil and gas project in Abu Dhabi.
Sudeshna Ghosh is seeking a career opportunity where she can apply her skills in electrical design, tender preparation, and customer coordination. She has over 10 years of experience designing power transformers up to 100MVA at Schneider Electric and Bharat Bijlee. Some of her achievements include successfully executing Schneider Electric's highest rating export job of 95MVA to Nigeria and developing Bharat Bijlee's highest rating transformer design of 160MVA. She is proficient in AutoCAD, SAP R/3, and aims to enhance her knowledge and skills while contributing value to an organization.
Pintubhai Dilipbhai Darji has over 11 years of experience as a piping engineer working on projects for companies like Saudi Aramco, GS Engineering, and Shell. He has expertise in piping layout, 3D modeling, engineering management, and working according to various international codes and standards. The document provides details on his educational background and work experience on various projects in Saudi Arabia, Egypt, India, and Singapore.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Padmanabh M. Dhobale is a senior piping engineer with over 11 years of experience in piping design and 3D modeling. He has extensive experience leading the design of piping systems for major projects in countries like Kuwait, Oman, Egypt, India, and the UAE. Some of his responsibilities include developing overall piping layouts, finalizing nozzle orientations, designing pipe rack layouts, performing stress analysis, and ensuring design compliance. Currently he works as a senior piping engineer at DODSAL Engineering & Construction Pte. Ltd. in Dubai, where he is the lead engineer for the piping system on the EWTIP project in Kuwait.
The document is a cover letter and resume from an applicant for a QA/QC Engineer position. The applicant has over 13 years of experience in civil engineering and QA/QC projects in construction and gas industries. He has expertise in civil works, quality control, construction engineering, planning, and health and safety. His experience includes supervising buildings, roads, substations, and he is proficient in AutoCAD.
Chandramohan P has over 18 years of experience in pipeline and piping design. He has worked on numerous oil and gas projects in India, the Middle East, and Iraq. Some of his responsibilities include preparing pipeline alignments, crossings, layouts, and isometric drawings; developing engineering data; and assisting the drafting team. He is proficient in AutoCAD, Microstation, and other software.
Jaspreet Singh Khiva is a mechanical engineer currently working as a Plant Engineer for Jaiprakash Power Ventures Ltd. He has over 8 years of experience in engineering roles for turbine and generator maintenance, installation, commissioning, and operations. He is seeking new opportunities to enhance his technical and commercial skills while working in a challenging environment.
V. Prabu is seeking a position as a Technical Personnel with over 13 years of experience in piping design for oil, gas, and petrochemical projects. He has extensive experience using software like PDMS, PDS, AutoCAD, and reviewing tools. His responsibilities have included equipment modeling, piping modeling, support selection, isometric drawing preparation, and coordinating with other departments. He holds a Bachelor's degree in Mechanical Engineering and resides in Chennai, India.
Bharathkumar has over 13 years of experience as a piping and pipeline designer. He has worked on oil, gas, and petrochemical projects in Oman, Italy, India, and Singapore. His responsibilities include preparing piping layouts, isometric drawings, material takeoffs, and fabrication drawings. He is proficient in AutoCAD, PDMS, Navisworks, and other piping design software. Bharathkumar holds a Diploma in Mechanical Engineering and safety certifications.
Jestin Parekadan is seeking a position that allows him to utilize his 6 years of experience in project management and controls for power projects. He has a B.E. in Electrical Engineering and is currently working as a Planning Engineer for Emirates Electrical Engineering in Chennai. Previously he held roles as a Project Controls Engineer and Planning Engineer for Larsen & Toubro on various thermal power projects in India. He is proficient in scheduling software like Primavera and resource planning.
Sachin Patil has over 13 years of experience in design and engineering of static equipment. He is currently working at Reliance Industries Limited as a Mechanical Static Equipment Engineer. Previously he has worked at United Heat Transfer Pvt Ltd, Positive Metering Pumps & Systems, and OHM Engineers in roles involving design, engineering, procurement, and project execution of equipment like heat exchangers, pressure vessels, columns, and tanks for oil, gas, petrochemical and other process industries. He has expertise in standards like ASME, TEMA, and familiarity with materials like carbon steel, stainless steel, and alloys.
Manish Gupta has over 10 years of experience as a mechanical engineer working on projects in the oil, gas, fertilizer, and chemical industries. He holds a BE in Mechanical Engineering and has worked for several engineering companies, including Samsung Engineering India and GS E&C India. His experience includes conceptual design, engineering, procurement, and project management. He is proficient in design software such as COMPRESS, PVelite, CodeCale, and AutoCAD.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking a senior role. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the projects and packages he has worked on include heat exchangers, vessels, columns, reactors, and flare and boiler systems. He is proficient in engineering software and international codes and standards.
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.ASHISH KUMAR
Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking senior level assignments. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the major projects he has worked on include the Banyu Urip LNG Development Project, South Mahakam Field Development Project, and Saudi Kayan Olefins Plant Project. He is proficient in engineering software such as PvElite, CODECAL, and COMPRESS.
Mr. Mahabir has over 20 years of experience in piping design and engineering. He has extensive expertise in process piping design for offshore petrochemical facilities, having worked on over 15 projects for Fluor and other companies in Trinidad and Tobago. His responsibilities include conceptual design, detailed design, 3D modeling, and project support functions. He is proficient in AutoCAD, PDS, and other piping design software.
Mohd Shadab is an AutoCAD draftsman seeking a position where he can utilize his skills in producing accurate 2D drawings and illustrations for engineering projects. He has over 5 years of experience in architectural and electrical drafting. His expertise includes creating structure drawings, installation diagrams, shop drawings, and foundation designs. Mohd Shadab is proficient in AutoCAD and collaborating with engineers to develop technical drawings according to specifications. He is eager to take on new responsibilities and continue expanding his drafting abilities.
Satya Prakash Rai has over 12 years of experience as an instrumentation designer. He has extensive experience modeling 3D designs in SP3D and PDS software. Currently working as a designer at SK E&C India Pvt. Ltd. in Gurgaon, he has worked on major projects for companies in Kuwait, Vietnam, Thailand, and India. His responsibilities have included 3D modeling, preparing design deliverables such as layouts and drawings, and verifying vendor prints.
The document contains the resume of Anil Kumar Lingala, who has over 16 years of experience in CAD, GIS, Lidar, BIM, industrial plant modeling, and laser scan modeling. He provides expertise in areas such as architecture, engineering, construction, mechanical engineering, geospatial technologies, and laser scanning. He is proficient in software such as ArcGIS, AutoCAD, Revit, and TerraScan. He seeks professional enrichment opportunities that allow him to continue working with and learning related technologies.
Asraful Hoque Molla has over 14 years of experience as a civil and structural designer. He has extensive experience using modeling software like SP3D, PDS, and PDMS to create 3D models and prepare detailed drawings using MicroStation and AutoCAD. Currently he works as a senior designer at Jacobs ZATE where he is responsible for modeling, design drawings, and reviewing drawings for compliance on various oil, gas and petrochemical projects in Saudi Arabia. He has worked on numerous projects in the Middle East and Asia.
Kaushik Mevada is seeking a role as a piping designer where he can utilize over 3 years of experience in 3D modeling software like PDS and PDMS. He has extensive experience in piping and equipment modeling, generating isometric drawings, coordinating with clients, and working on projects in industries like power and coal handling. Some of the key projects he has worked on include CFBC boiler and coal handling systems for Reliance Utilities and Power. He is proficient in software like PDS, PDMS, AutoCAD and MS Office.
M. Ilayaraja is a piping designer with over 14 years of experience in petroleum and oil and gas projects. He has extensive experience using PDS/PDMS for piping layouts, support modeling, and isometric drawings. Some of the projects he has worked on include offshore projects in Norway and onshore projects in Canada, Russia, Singapore, Qatar, and India. He is proficient in PDS, AutoCAD, MicroStation, and MS Office applications.
Vinod Pawar is seeking a role in project design, preferably in oil and gas or process plants. He has over 6 years of experience in piping design and drafting. His technical skills include AutoCAD, PDS, MicroStation, and SP3D. He has experience modeling equipment, piping systems, and performing isometric extraction. Notable projects include work for Shriya Chemicals, Hikal, and Jindal Denim. Pawar holds a diploma in piping design and drafting and has experience working for companies like Vishva Associates and Hindustan Dorr Oliver.
P.Vel Pandi provides his curriculum vitae, which includes his contact information, objectives, areas of specialization, strengths, work experience, academic credentials, additional qualifications, IT skills, personal details, and declaration. He has over 10 years of experience in plant engineering, construction, fabrication, erection of steel structures and equipment installation. His roles have included piping supervisor, site engineer, QA/QC engineer, and project lead. He holds a B.E. in Mechanical Engineering and is proficient in AutoCAD, ProE, Microsoft Office, and various operating systems.
P.Preetish Daniel is a piping designer with over 6 years of experience in piping layout drawings and isometrics using PDS 3D software. He has worked on projects in oil and gas refineries, air separation plants, and petrochemical industries. Preetish Daniel is proficient in P&ID, piping ISO drawings, GA drawings, and has experience modeling equipment, routing pipes, generating reports, and extracting isometrics from piping models. He seeks a position where he can enhance his skills and contribute to an organization.
Arun Prasath Selvaraj is a mechanical engineer with 7 years of experience in piping design, layout, and project coordination. He has extensive knowledge of piping design codes and standards. He is proficient in AutoCAD, CAESAR II, MicroStation, and other piping software. He has worked on projects in various industries including power plants, and gained overseas experience working for Westinghouse Electric Company in the United States. He is looking for new opportunities where he can apply his skills and experience in piping engineering.
Vikram Singh Rathore has over 9 years of experience as a mechanical/project engineer working on large oil and gas pipeline projects in Saudi Arabia and India. He has managed teams of up to 100 people and currently works as a project engineer on the $1.5 billion Phase 2 expansion of the Master Gas System pipeline in Saudi Arabia. Rathore has a bachelor's degree in mechanical engineering and is pursuing further qualifications in project management.
Resume of Jitendra Shende for the post of Piping EngineerJitendra Shende
Jitendra S. Shende has over 11 years of experience in piping engineering and 3D modeling software like SP3D, PDMS, MDS, and AutoPLANT. He is currently working as a PDMS Coordinator for Japan Gas Corporation in Thailand, where he is responsible for incorporating field changes, preparing piping layouts and isometrics, and managing the PDMS team. Previously he has worked on projects in Thailand, Oman, UK, South Africa, and India for companies like iGATE, Rolta India, Sasol, and Reliance. He holds a B.E. in Chemical Engineering and is proficient in software like AutoCAD, Navisworks, and SolidWorks.
Sameer Parab has 15 years of experience as a piping designer for oil and gas projects. He has worked on international projects in India, Brunei, Abu Dhabi, and Syria. His responsibilities have included piping modeling, isometric drawings, and developing piping arrangements. He is proficient in software such as PDMS, SP3D, and AutoCAD.
The document is a curriculum vitae for R. Muthukumar, who has over 8 years of experience as a piping design engineer working on projects in oil, gas, petrochemical and refinery fields. He has extensive knowledge of piping codes and standards and experience performing tasks like piping design calculations, stress analysis, preparing drawings and specifications, and engineering coordination. He currently works as a Piping Engineer for Petrofac Engineering Services India Pvt Ltd and has a Master's degree in Manufacturing Engineering.
Mayank Kumar is a piping engineer seeking a challenging position to contribute fully and learn. He has a B.Tech in mechanical engineering with 65% marks and experience designing piping systems for oil, gas, and chemical plants. His skills include AutoCAD, PDMS, and Microsoft Office. Currently working on projects including an LPG import terminal, gas treatment units, a vacuum ejector system, and modular piping skids. He provides 3D modeling, layout, support design, and drawings for piping systems and ensures compliance with design codes and standards.
The document provides details on the work experience and qualifications of Husin Asran as a lead/senior piping designer with over 26 years of experience in the oil and gas industry. It summarizes his roles and responsibilities coordinating piping design teams, developing equipment layouts and piping designs, modeling in PDMS, and providing construction support. It lists his involvement in numerous projects for companies like Petronas, ONGC, and Shell.
This document contains the resume of Vedprakash Kushwaha. It summarizes his contact information, skills, professional experience, education and personal details. He has over 5 years of experience in MEP and electrical installation projects. Currently he works as an engineer for Fuji Furukawa E&C Co where he is responsible for panel designing, lighting layout, bill of materials preparation, quality assurance and project management. Previously he has worked with M/S HST Enterprises and M/S H.N Traders & Engineers on electrical installation projects for clients such as CPWD, IIT Delhi and Era Infra Engineering. He holds a B.Tech degree in Electrical and Electronics Engineering from UPTU Lucknow
- Devidas A. Bhaganagare is seeking a position as a Piping Designer with over 8 years of experience in piping design, modeling, and engineering.
- He has extensive experience using software like PDMS, CADWorx, and AutoCAD to create piping layouts, models, isometric drawings, and more for various oil, gas, and industrial projects.
- His past roles include positions at CODE TECH and Thermax Limited where he was responsible for tasks like piping modeling, equipment layout, support design, material take-offs, and more.
Maneesh Kumar Dwivedi is a piping design and project management professional seeking opportunities in oil & gas, power, or FMCG industries. He has over 6 years of experience in piping design engineering and 1.5 years in project management. He is proficient in piping layout, support design, line sizing, and using software like AutoCAD, MS Project, and Navisworks. He has worked on projects in power and oil & gas for companies like L&T, Reliance Industries, Development Engineers, and Thermofab Engineers.
Abhishek Kumar has over 3 years of experience as a Mechanical Engineer managing construction projects in India. He has managed teams of up to 50 people on infrastructure, oil and gas, and government projects. Currently, he works as the Mechanical Engineer in charge of an IOCL pumping station project in Gujarat, where he is responsible for planning, coordination, and project controls. Previously, he managed projects for GAIL, HPCL, and OIL India, where his responsibilities included preparing budgets, schedules, and engineering drawings, as well as supervising mechanical and piping installation work. He has skills in construction management, site safety, quality control, cost control, and subcontractor supervision.
Mandar Date is seeking a middle level position in design engineering or project management in the oil & gas, pharmaceutical, FMCG, or power sector. He has nearly 10 years of experience in piping design engineering, drawings, team management, and implementing piping designs according to client requirements and piping standards. Currently he works as an Assistant Manager at Larsen & Toubro where he is responsible for piping design projects in Indonesia and the USA. Previously he has worked on power plant, chemical plant, and oil & gas projects in India, China, and Norway.
Ramesh C. has over 8 years of experience in piping stress analysis, support engineering, and construction coordination for oil, gas, and petrochemical projects. He has worked on projects in India and globally for companies such as Amec Foster Wheeler, Reliance Energy, and Dodsal Engineering. His responsibilities have included stress analysis of critical piping lines, support design, load calculations, and coordination between design, fabrication, and construction teams. He has extensive knowledge of stress analysis software including CAESAR II, SPR, Navisworks, ANSYS, and PROE.
Tirumani Naresh is an electrical engineer seeking a challenging position applying his 3+ years of experience. He has worked on projects in design, construction, testing and commissioning. His responsibilities have included designing substations, preparing bills of materials, reviewing designs, and supporting field execution. He is proficient in AutoCAD, programming languages, and has managed projects in power distribution and installation of equipment.
Enrico S. Simon is applying for a Piping Design Engineer position. He has over 9 years of experience in piping design, layout, modeling, and coordination across various projects in Southeast Asia and the United States. His experience includes conceptual design, 3D modeling, isometric drawing production, and on-site support for projects in industries like oil and gas, power, and chemicals. He holds a Bachelor's degree in Mechanical Engineering and is proficient in piping design software like PDS, SP3D, and AutoCAD.
- Md Dilkash Reza is seeking a position utilizing his 6 years of experience in industries and turnkey projects.
- He currently works as a Senior Project Engineer at Techno Fab Manufacturing Limited, an EPC company, earning 3.8 lacs annually.
- His experience includes structural and mechanical erection, quality control inspection, fabrication, and project coordination.
- He has a Bachelor's degree in Mechanical Engineering and is proficient in AutoCAD and CATIA design software.
1. CURRICULUM VITAE
CHETAN BALIRAM PATIL
301, Moreshwer Apartment, Sector-13, Kharghar, Navi Mumbai-410210, Maharashtra, India
Mo:-+919769108410
chetan.b.patil01@gmail.com
chetan063@gmail.com
DISCIPLINE: PIPING DESIGNER (PDS/PDMS)
I aim to become an integral member of the growing organization and to be a part of the
organizational pillar. I with my dedication and hard work would like to see that my services are
always “needed”.
• Have 11.4 yrs. of experience in Piping
• From Aug2015 to till date in Black & Veatch Pvt. Ltd. (As PDS Designer).
• From Sep2014 to Aug 2015 in Jacobs Engineering India Pvt. Ltd. (As PDS Designer).
• From Dec 2013 to Aug 2014 in Reliance (As a Piping Designer).
• From Sep 2013 to Dec 2013 in Foster Wheeler Asia pacific Pte. Ltd., Singapore (As PDS
Designer.)
• From Jan 2012 to Aug 2013 in Jacobs Engineering India Pvt. Ltd. (As PDS Designer.)
• From Jan 2011 to Jan2012 in Aker Power Gas Ltd. (As PDS Designer.)
• From Jun 2010 to Jan 2011 in Toyo Engg. India Ltd. (As PDS Designer.)
• From Jun 2009 to May 2010 in L&T IES (Baroda). (As a PDS Designer).
• From Feb 2009 to Jun 2009 in Chemtex Global Engineers Pvt. Ltd (As a PDS Designer).
• From Feb 2006 to Feb 2009 in Bec-Rel Engg pvt ltd. (As a PDS Designer.)
• In BECREL 3 months site experience at Jamnagar.
• From Jan 2005 to Feb 2006 with Gharda Chemical Pvt. Ltd. (As a Piping Drafting).
• Preparation of Interconnection Diagram.
• Study piping and Piping layout from P&IDs.
• Piping and Equipment modeling of the plant in PDS Ver. – 7.3 & PDS Ver. – 8.0.
• Checking SER & clear it.
• Primary and secondary support selection along with civil pipe supports for non-critical lines, and
logical supporting for critical lines for input to stress.
• Once stress analysis is over and load summery sheet is available selecting and putting supports
from Bechtel support standard.
• Extracting, checking and issuing Isometrics for construction.
• Reviewing and commenting on vendor data.
• Inter departmental checking with civil, instrumentation, process, electrical etc.
• Reviewing using Smart Plant Review.
Having Exposed to Maximum time on Modeling with the help of PDS software. Can work
independently on PDS Modules & Smart Plant Review (SPR).
Objective:
Experience Summary:
Responsibilities during the above Assignments:
Computer Proficient-:
2. • S.S.C From Pune Board with an aggregate of 50.0% in March 1998.
• H.S.C from Mumbai Board with an aggregate of 50.0% in Feb 2000..
• BCOM from Mumbai University in Feb 2005.
• Diploma in MECHANICAL DRAUGHTSMAN at GUPTE INSTITUTE.
• PDS Version- 8.0
• Pelican Forge Support Modeler
• Micro station.
• Smart Plant Review
• Nevis work Freedom
• Auto-CAD.
• Well conversant with MS-OFFICE.
1. Designation: PDS Piping Designer
Client: Black & Veatch Pvt. Ltd.
Project: Golar Hill Flng
Period: From Aug 2015 to till Date
Responsibilities:-
• Reviewed P&ID for RTF P Track area
• Study Plot Plan, Designing Piping & Equipment Layout using PDS 3D Model.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
2. Designation: PDS Piping Designer
Client: Jacobs Engineering India Pvt. Ltd
Project: Reliance Jamnagar 3 (J3 MEG Plant)
Period: From Jan 2014 to Aug 2015
Responsibilities:-
• Study Plot Plan, Designing Piping Layout using PDS 3D Model.
• Designing Pump Piping
• Reviewed piping layout & giving Physical support in a Column area by using Pelican Support Modeler.
• Self-checking Isometric drawings.
Project: Flint Hills Resources (Phase 4), Houston
Period: From Sep 2014 to Dec 2014
Responsibilities:-
• Study Plot Plan, Designing Piping Layout using PDS 3D Model.
• Designing Tank Firm Piping.
• Designing Skimmer Piping.
• Designing Rack Piping
• Designing PSV station Piping.
• Designing Pump Skid Piping
Project Details:
Computer Skills:
Educational Qualification:
Technical Qualification:
3. • Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self-checking Isometric drawings.
3. Designation: PDS Piping Designer
Client: Reliance India Pvt Ltd. (JV –Reliance and Bechtel)
Project: Jamnagar Export Refinery Project 3. (J3).
Period: From Dec 2013 to Aug 2014.
Responsibilities:-
• Reviewed P&ID for RTF P Track area
• Prepared Line list for the Pipe Track area based on available P&ID’s.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
4. Designation: PDS Piping Designer
Client: Foster Wheeler Asia pacific Pte. Ltd., Singapore.
Project: Lanxess
Period: From Sep2013 to Dec 2013.
Responsibilities:-
• Presently working in a Compress area
• Study Plot Plan, Designing Piping Layout using PDS 3D Model
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area by using Pelican Support
Modeler.
• Self-checking Isometric drawings (ISOGEN).
5. Designation: PDS Piping Designer
Client: Jacobs Engineering India Pvt. Ltd
Project: Horizon Utility & Off Site (Phase 2&3), Canada.
Period: From Jan 2012 to Aug 2013.
Responsibilities:-
• Presently working in a COGEN area
• Designing Gas Heating & Scrubbing Piping
• Study Plot Plan, Designing Piping Layout using PDS 3D Model
• Designing Turbine Piping.
• Designing Rack Piping
• Designing Cooling Water Skid Piping
• Designing Wash Water Skid Piping
• Designing Fire Protection Skid Piping
• Designing Heat Exchanger Piping
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self-checking Isometric drawings.
6. Designation: PDS Piping Designer
Client: AKAR POWER GAS LTD.
Project: Paradip Refinery Plant, India.
Period: From Jan 2011 to Jan 2012.
Responsibilities:-
• Designing pump piping
• Modeling Air cooler small bore piping
• Modeling Air cooler fir line piping.
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area .
• Self checking Isometric drawings (ISOGEN). -
7. Designation: PDS Piping Designer
Client: TOYO Engg. India Ltd
Project: HTP Plant, India.
Period: From Jun 2010 to Jan 2011.
Responsibilities:-
4. • Reviewed piping layout & giving Logical & Physical support in a pipe rack area .
• Self checking Isometric drawings (ISOGEN). -
• Modeling Utility area in piping
• Modeling Heat Exchanger Piping.
8. Designation: PDS Piping Designer
Client: L&T IES, Baroda, Gujarat
Project: Continues Liquid Process London, England.
Period: From Jun 2009 to May 2010.
Responsibilities:-
• Designing all pump piping in CLP area
• Designing Plate exchanger piping in CLP 1 area
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Self checking Isometric drawings (ISOGEN).
9. Designation: PDS Piping Designer
Client: Chemtex Global Engineers Pvt Ltd
Project: Cellulose Acetate Plant, China.
Period: From Feb 2009 to Jun 2009.
Responsibilities:-
• Reviewed piping layout & giving Logical & Physical support in a pipe rack area.
• Modeling all vessel trim piping in Anhydride area.
• Self checking Isometric drawings (ISOGEN).
10. Designation: PDS Piping Modeller
Client: Becrel India Pvt Ltd. (JV –Reliance and Bechtel)
Project: Jamnagar Export Refinery Project.(JERP).
Period: From Feb 2006 to Feb 2009.
Responsibilities:-
1) OSBL Unit:-
A) RTF (Refinery Tank Farm )
• Reviewed P&ID for RTF Pipe Track area
• Prepared Line list for the Pipe Track area based on available P&ID’s.
• Completed the Track spacing required for the piping.
• Designing of LPG Spear piping.
• Designing of Pump-bay piping
• P & ID markup & DCN update
• Extracting & self checking Isometric drawings (ISOGEN).
B) MTF (Marine Tank Farm):-
• Reviewed P&ID for MTF Pipe Track area
• Prepared Line list for the Pipe Rack area based on available P&ID’s.
• Completed the rack spacing required for the piping.
• Extracting & self checking Isometric drawings (ISOGEN).
2) ISBL Unit:-
• Small bore lines routing in CRUDE area
• Updating of model as per DCN.
11. Designation: Piping Draughtsman.
Client: Gharada Chemical Ltd
Project: Hydrogenation & Oxidation Plant, (Lote)
Period: Jan 2005 to Feb 2006.
Responsibilities:-
• Modification of Equipment and Piping Layout.
5. • Preparation of Isometrics, Support layout.
Date of Birth : 03 Jan 1983.
Religion : Hindu
Languages Known : English, Hindi, and Marathi.
Nationality : Indian
Marital status : Married
Place : Navi Mumbai
Age : 33yrs.
I consider my self familiar with Chemical and Piping Design Engineering aspects.I am also
confident of my ability to work in team.
I here by declare that the information above is true to the best of my knowledge.
Chetan Patil
Declaration:
Personal Detail
6. • Preparation of Isometrics, Support layout.
Date of Birth : 03 Jan 1983.
Religion : Hindu
Languages Known : English, Hindi, and Marathi.
Nationality : Indian
Marital status : Married
Place : Navi Mumbai
Age : 33yrs.
I consider my self familiar with Chemical and Piping Design Engineering aspects.I am also
confident of my ability to work in team.
I here by declare that the information above is true to the best of my knowledge.
Chetan Patil
Declaration:
Personal Detail