Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
Result-oriented with a fast-learning curve and an ability to take calculated risks, defining business mission and integrating resource strengths to deliver impeccable performances aligned to overall objectives .A dynamic professional offering over 15 years in the field of Site Supervisory position for (Pipeline), Erection in Pipeline, in Oil & Gas, Refinery, Petrochemicals, & Power Plant in Saudi Arabia, U.A.E, Kuwait & India for Various Eng. Construction Projects.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
Sr. QA/QC Mechanical Engineer with 8 years experience in power plant, oil and gas.
Industrial Project QA/QC Mechanical Head professional with 8 years of experience from the well-recognized organizations in the field of Industrial Inspection, Quality assurance, Quality control, Welding inspection and conformity Assessment of products and services.
Expertise in conducting receiving, in process and final inspection for achieving enhanced Quality. Having good working experience as a Third party inspector for SGS industrial services.
Distinctively been a Internal auditor for ISO 9001:2008 Quality management systems. Self-directed, team-oriented, enthusiastic & possessing solid organizational skills.
A few LinkedIn improvement tips have been suggested with a view to enhance the social media presence of LinkedIn users. Aspects suggested are Professional photo, Professional element of headline, Summary and Skills and expertise. Hope you leverage these inputs
00 resume of site supervisor (Pipeline & welding)Mohammad Khan
Result-oriented with a fast-learning curve and an ability to take calculated risks, defining business mission and integrating resource strengths to deliver impeccable performances aligned to overall objectives .A dynamic professional offering over 15 years in the field of Site Supervisory position for (Pipeline), Erection in Pipeline, in Oil & Gas, Refinery, Petrochemicals, & Power Plant in Saudi Arabia, U.A.E, Kuwait & India for Various Eng. Construction Projects.
Resume gede andi- construction piping supervisorandi dipayadnya
A senior construction supervisor (piping mechanical and structural) with more than 10 years experience in supervisory role, with a good knowledge of piping, structural, welding, rigging-lifting, scaffolding, HSE, etc.
Sr. QA/QC Mechanical Engineer with 8 years experience in power plant, oil and gas.
Industrial Project QA/QC Mechanical Head professional with 8 years of experience from the well-recognized organizations in the field of Industrial Inspection, Quality assurance, Quality control, Welding inspection and conformity Assessment of products and services.
Expertise in conducting receiving, in process and final inspection for achieving enhanced Quality. Having good working experience as a Third party inspector for SGS industrial services.
Distinctively been a Internal auditor for ISO 9001:2008 Quality management systems. Self-directed, team-oriented, enthusiastic & possessing solid organizational skills.
A few LinkedIn improvement tips have been suggested with a view to enhance the social media presence of LinkedIn users. Aspects suggested are Professional photo, Professional element of headline, Summary and Skills and expertise. Hope you leverage these inputs
A post graduate of petroleum Engineer (from PME) with 10 years of experience in project engineering and project management from conception to commissioning of multi-discipline EPC contracts related to chemical, refinery, oil & gas and LNG sectors including Egypt, Qatar, Abu Dhabi and Oman.
Working in Arabian Industries (AI) LLC for nearly 6 years in feasibility, detailed engineering, EPC, EMC and IMC Projects for PDO (Petroleum Development Oman) and ORPIC.
I’m a petroleum Engineer with an Excellent experience In Oil & Gas Projects and industries such as exploration ,drilling ,work over , Oil & Gas well drilling & ALS Production services and Projects in oil & Gas Energy field section ,My experience in the Drilling , Well control & wellhead equipment Inspection ,Refurbishment , Maintenance , Testing , Recertification and Installation As per API(6A , 6D , 16A , 16D, 16C & 7K ) Specification. Oil & Gas artificial lift production technology and solution. Maintenance, Installation and Overhaul of well head and well control tools and equipment; furthermore, many projects for new rigs (on shore) and offshore rig (ST-Bahari1- Jack up), Prove leadership skills involving managing, developing and motivating teams to achieve their objectives. Reliable, trustworthy and meticulous, gained a good understanding of what is required of Oil & Gas engineering.
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
The Benefits and Techniques of Trenchless Pipe Repair.pdf
Senior Pipeline/ Piping Mechanical Engineer Construction & Commissioning
1. Page 1 of 5
SYNOPSIS
Acquired Degree in Mechanical Power Engineering, having over 10 years of professional experiences in EPC
sector both at Home & International locations for Refinery, Petrochemicals, NGL Plant, etc.
HIGHER EDUCATION QUALIFICATIONS
Bachelor of Science in Engineering: May2006: Major: Mechanical Power Engineering, Helwan University
SUMMARY OF EXPERIENCES
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas
Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional
business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major
EPC and Petroleum companies’ region.
My Professional acumen being ability to oversee total Project Engineering, Procurement, Construction &
Commissioning of large EPC Projects to ensure project is in accordance with scope, quality requirements,
budget and schedule. Skilled at interfacing with client representatives, vendors, subcontractors and other
stakeholders.
SKILLS AND SPECIALTIES
Proactive with an excellent leadership skills, good communicative skills & Analysis with a clear focus on
improvement of processes, ability to work in customer focused way & to handle time pressure and to set
priorities/supports.
Good awareness and analysis with various national and international Codes & Standards such as DEPs
(PDO Specs.), SHELL STDs, GASCO Specs. (DGS) ASTM, DIN, BS EN ISO, ASME B31.3, B31.4, B31.8,
API 5L, API 1110, SAUDI ARAMCO Spec. and AUSTRALIAN STANDARD (AS 1978-1987).
Assists in work pack initiation through understanding the quality requirements, ensuring the full
implementation for COMPLETION CERTIFICATION MANAGEMENT SYSTEM (CCMS) in site level.
CAREER DETAILS
The Petroleum Projects and Technical Consultations Co.(PETROJET) (From 20/03/2007 to Till Date):
PETROJET is a Multidisciplinary EPC Contractor specialized in providing Design, Engineering, Construction,
Procurement, Pre-commissioning and commissioning services basically associated with Oil, Gas, Petrochemical,
Chemical and Power Industries. Operations spread over two continents /12 Countries with reputed clients at the
upper end of the market like Saudi Aramco (Saudi Arabia), Khafji Joint Operations (Saudi Arabia/Kuwait),
Sonatrach (Algeria),TOTAL (Yemen), Eni (Libya), PDO (Oman),GASCO (UAE),ADCO(UAE) TRANSCO,ADDC,
ADM (UAE) etc.
PROJECTS ACCOMPLISHED:
A. Position: Deputy Project Manager
Client: Abu Dhabi Gas Industries Ltd. (GASCO)
EPC: PETROJET ABU DHABI, UAE
Engineering Consultant: PENSPEN, ABU DHABI, UAE
PMC: Tebodin
Project Description: 24” x 6 km (Approx.) Carbon Steel Natural Gas Pipeline SV-02 to Yas Island.
16’’ x 2.2 km (Approx.) Carbon Steel Pipeline from Yas Island to Saadiyat Island.
Two Secondary Pressure Reduction Stations SPRS-1&2 are provided to secure flow of NG to
the distribution mains with the pressure 4barg and one Primary Pressure Regulating Station (PPRS) has
(H2S Removal Unit, Gas Filter, Custody Transfer Skid with check meter, Pressure reduction skid, Odorant
injection, Gas chromatography, Communication and Instrumentation, Emergency Power Generation
System, etc.)
SENIOR PIPELINE/ PIPING MECHANICAL ENGINEER
CONSTRUCTION & COMMISSIONING
(ADNOC Distribution/ GASCO/ PDO/ SONATRACH/ ANADARKO/ PETROFAC/ HILL INTERNATIONAL)
APPROVED PROFESSIONAL
E-mail address: eng.mohamed_mostafa@yahoo.com,
Mob: 002-01003074086/ 002-01149252549/00971-(0)796900405
2. Page 2 of 5
Responsibilities: As Client, Approved Commissioning Manager: GASCO PROJECT No. 5275
Day to day basis following up the progress, and ensure that the reports and drawings are in line
with the specifications and time schedule.
Review the reports to ensure that the same are meeting the requirements.
Review all the design discipline output to make sure that all the meeting the specifications and
client requirements.
Interfacing with the client to get the final approval on the drawings and the green light to start the
execution at site.
Prepare the bids, evaluating the bidders and choose the best bid and offer.
Get all the approvals required to start the site activities.
Monitor the site execution for the packages
Review and approve the work plans, time schedules and manpower histograms.
Report to the Project Manager on overall progress and cost performance of the Project, using the
support of Project Controls.
Ensure that Project objectives (safety, quality, cost, and time) for each Area and Package are well
defined, communicated and followed-up.
Provide guidance and expertise to project stakeholders.
B. Position: Pre-Commissioning and Commissioning Manager
Client: Abu Dhabi Gas Industries Ltd. (GASCO)
EPC: PETROJET ABU DHABI, UAE
Engineering Consultant: PENSPEN, ABU DHABI, UAE
PMC: EIL
Project Description: 24” x 18 km (Approx.) Carbon Steel Natural Gas Pipeline from Yas Island to Saadiyat
Island from the existing facilities PPRS/SPRS-1/SPRS-2, GAS-in.
400mm x 7 km (Approx.) High Density Polyethylene (HDPE) Pipeline from Saadiyat CRS to tie-in with the
existing 400mm HDPE pipeline on Mina Zayed and 16’’ x 4.2 km (Approx.) Carbon Steel Pipeline from
Saadiyat CRS to Reem Island receiving station.
CRS station has (Gas Filter, metering skid, Pressure reduction skid, Odorant vessel, etc.)
Responsibilities: As Client Approved Commissioning Manager: GASCO PROJECT No. 5275
Responsible Pre-commissioning, Mechanical completion and Commissioning Procedures write
ups, submissions and approval.
Leads all dynamic Pre-commissioning activities including oversee cleaning the pipe line, gauging,
drying and leak testing activities carried as per EPC Scope
Responsible for compliance to PTW systems, Activity Risk Assessment and identifies and mitigate
risks posed to the workforce during commissioning and start-up.
Responsible for successful Mechanical Completion, Punch list close out and System Completion
dossiers prior to acceptance not limited to NCR, Site Queries, and Field Change request, as built
etc. prior to CAC.
Participate in Process system walk down audit and identify critical punch lists and progressing
towards efficient close out.
Manage implementation of joint integrity plan following completion of leak testing to provide
assurance full proof leak free plant, prior to introduction of hydrocarbons.
Ensure that any chemicals, packing, special tools, commissioning spares or other materials
required to support commissioning and start-up prior to schedule are available.
Monitoring/Supervision of N2 Leak Testing of all Critical Systems carrying-out prior to Introduction of
Hydrocarbons. Supervise pre-commissioning team for purging pipeline and piping by nitrogen using
nitrogen generation unit membrane type.
Categorization of Punch Lists (A, B & C) including the closeout of all punch list items.
Preparation for Commissioning, Tie-in, Leak test and Bolt tightening procedures and reports.
Co-ordinate with GASCO OPN/Commissioning team for introducing Hydrocarbon.
Supervise the team for Caliper pigging survey for integrity of pipelines. Participated in preparation of
HSE required documentation as Cause and effect - ERP (Internal & External)-Commissioning HSE
Plan - Zone classification – Process studies, recommendation of various studies e.g. HAZOP –
HAZID/QRA etc.
Prepare calculation required to identify time and noise level will be taken for Venting to
atmosphere.
Prepare a list of critical valves to be tested and maintenance prior to gas in.
Prepare a list of commissioning spare parts stock to be made available prior gas in.
3. Page 3 of 5
C. Position: Pre-Commissioning/ Commissioning Manager
Client: Petroleum Development Oman (PDO)
EPC: PETROJET, OMAN
PMC: VELOSI
Engineering Consultant: MOTT MCDONALD
Project Description: 20” Internally/ externally coated Carbon steel 157 Km ISO 1381-PSL2 Grade L415 (X60)
gas Pipeline for PDO from BARIK to BVS-08.
Responsibilities: Approved as Commissioning Manager from PDO contract No. C31/1376
Responsible for Mechanical Completion, pre-commissioning/ commissioning activities.
Verification of all systems completion requirements associated with the scope of work of all the
disciplines.
Creation and administration of Technical queries and Engineering queries / punch list register.
Prepare a list of commissioning spare parts stock to be made available prior gas in.
Coordinate with other projects department engineers to complete certification and completions
management system (CCMS).
Creation and administration of Technical queries and Engineering queries / punch list register.
System definition and marking-up of system with use of Adobe Acrobat Professional.
Writing of commissioning procedure for each systems with their mark-up P&ID and PFD Drawings.
Work closely with operations personnel/control room operators and contractors during the
commissioning and start-up.
Coordinate with other projects department engineers, operation personnel and contractor group to
ensure that all requirements for commissioning work of all the units/systems are fulfilled.
Proven project leader with experience in handling projects from design to commissioning stage.
Effectively involved in performing pipeline construction and Pre-commissioning including pigging,
Flooding and Testing in accordance to approved procedure and international standard.
D. Position: Pre-commissioning/ Commissioning Manager
Client: ANADARKO/ SONATRACH
EPC: PETROJET, ALGERIA
Project Description: ELMERK FLOW PIPELINES LOT 3&4 different sizes from 4" up to 24" (GAS-OIL-
WATER) with approximate length 200 KM.
Responsibilities:
Checking for readiness of mechanical completion dossiers of systems, accordingly with QA&OC
system, in collaboration with others departments and client representatives.
Develop punch item database by systems, checking for completion and close-out of punch items
accordingly with client and company agreed standards.
Preparation of Mechanical Completion Certificate, Exceptions List and Ready for Commissioning
forms of systems and submitted to company and client management for approval.
Supervise of Purging by using nitrogen generation membrane type unit for pipeline.
Lead PETROJET Pre-Commissioning team for initial drying and final drying for pipeline and Leak
test for piping on plot.
Prepare the Pre-commissioning/ commissioning documents in advance before the commencement of
commissioning work (Method of statement of Tie-In, Demolishing, reinstatement, bolt tightening, final
drying and purging by nitrogen).
Work with other discipline engineers and operations personnel for manpower and supporting resources
to conduct commissioning work.
Supervise commissioning of units/system, assist with complications that may arise, sign-off and
handover of certification packs to platform operation team.
Ensuring necessary HSE reviews are undertaken and identified actions completed.
Provided Calculation, Procedures, Drawings, data sheets and all engineering documents for Pre-
commissioning, Commissioning and Testing Activity of onshore Pipeline and Process Plants service.
Interpret all Engineering Documentation to ensure works are conducted as required.
Recorded operating data required to ensure complete reporting documentation during Pre-
commissioning, Commissioning and testing phase.
Contributed to the provision of solutions to internal interface problems.
Actively participated in the engineering function of Project Tendering.
4. Page 4 of 5
E. Position: Pre-commissioning/ Commissioning Manager
Client: SONATRACH
EPC: PETROJET, ALGERIA
Project Description: 48” GAS PIPELINE IN ALGERIA LOT1&2 WITH APPROXIMATE LENGTH 430 KM
Responsibilities:
Follow up for all Pre-commissioning activity (Cleaning, Gauging, Flooding, and Hydrostatic Test).
Checking for readiness of mechanical completion dossiers of systems, accordingly with QA&OC
system, in collaboration with others departments and client representatives.
Creation and administration of Technical queries and Engineering queries / punch list register.
Writing of commissioning procedure for each systems with their mark-up P&ID and PFD Drawings.
Inspection of packaged process skid and equipment supplied by vendors if piping components are
complete and to ascertain the compatibility with the outside process piping.
Assist in developing procedures to conduct chemical degreasing cleaning and performance test for
new plant equipment upon start-up.
To coordinate/ Interface between commissioning and Pre-commissioning for system turn over to
commissioning after pre-commissioning.
Preparing all site drawing, Pipeline joint History, Pressure Test, Flooding, Gauging documents and
report.
Effectively involved in performing pipeline construction and Pre-commissioning including pigging,
Flooding and Testing in accordance to approved procedure and international standard.
F. Position: Pre-commissioning Engineer
Client: KHALDA PETROLEUM CO.
EPC: PETROFAC
Contractor: PETROJET, EGYPT
Project Description: Salam gas trains (SGT 3 & 4 project) two new gas processing trains.
Responsibilities:
Inspection of packaged process system and equipment supply by the vendor if piping components
are complete.
Mark-up Process Engineering Flow Scheme of system for mechanical cleaning.
Write/assist in developing procedures to conduct performance test for new plant equipment upon
start-up. Assist with conducting tests, gathering data and verifying results. Implement strategies to
improve Commissioning and Start-Up.
Quality control of system in accordance with the Commissioning Quality control procedure.
Record and Report all non-conformances actions in accordance with the Commissioning start-up
procedure during start-up.
Document control for changes and deviations from detail design reflected by CTQ field notes and
site instruction (SEI)
Carry-out function checks on systems and equipment to ensure that the suction and discharge
valves are functioning very well and equipment in good conditions.
Capable to Plan Schedule, Manpower, and Necessary Tools/Equipment required for Pre-
Commissioning/ Commissioning.
G. Position: Technical Office Engineer
Client: EMETHANEX (METHANOL Project)
EPC: TECHINT CO.
Contractor: PETROJET, EGYPT
Project Description: Plant produces methanol
Responsibilities:
Checking Isometrics for piping lines and preparation of AS-BUILT drawings.
Definition and Preparation of Piping Hydro Test limit on PI&D for Utilities and Process units.
Follow up Modifications on Site concerning piping layout, Isometrics and PID in accordance to site
conditions.
Preparation of complete programming Database (MS ACCESS) for follow- up of piping Test
package submission including Punch list, Fabrication and related tests.
Follow up piping punch list done before Hydro test.
Inspect and check the installed Piping & Supports at sites.
Follow up Flange Management done before Hydro test.
Follow-up Flushing and Chemical Cleaning for Suction of Compressors.
Supervisor for Tighten all flanges accordance to project specifications (By using Tension Machine,
Hydraulic Torque wrench and Manual Torque wrench) and putting the procedures of tighten.
Follow-up Leak and Tightness test, Flushing and Blowing of lines for Process Unit.
5. Page 5 of 5
H. Position: Pre-Commissioning Engineer
Client: GASCO EGYPT
EPC: ENPPI
PMC: HILL INTERNATIONAL
Contractor: PETROJET, EGYPT
Project Description: DAHSHOUR COMPRESSION STATION
Responsibilities:
Check and supervise on all mechanical piping spool fabrication (fit up, dimension, orientation, and
alignment).
Arrange with contractors at site, manpower and resources which meet the target productivity of
project.
Check on Material tractability plan and bill of material per each spool to be sure from right material
for right spool
Follow up and monitoring at site (pipe rack, piping supports, piping line up and assembly
of valves with accessories – by loops or by systems ).
Supervise on all UG piping construction and test (facilities and infrastructure) as sewage network,
potable water network, firefighting network and hydrants).
Supervise on site tank building (pressurized and non-pressurized) as settlement, nozzle
orientation, hydrostatic test, vacuum test and review all QC/ QA reports related to tanks.
Check, Review, Supervise and Approve All Hydrostatic Tests procedure for All Piping Systems.
Supervise on CLT (commissioning leak test) And GLT (gross leak test) Activities.
Skill Development Courses Accomplished:
Technical Skill Courses:
- Welding engineering in Egyptian Engineering Associations.
- Design and construction of pipe networks in Higher Technological Institute.
- Calculations of Electrical Loads and Design in Ein Shams University.
- Maintenance for pumps and compressors in Helwan University.
- Types of bearing and Gears in Cairo University.
Communication Courses:
- Managerial Skills Developing for Engineers in American Supplier Institute (ASI)
- Management Training Program in Career Development & Consultations Academy.
- Report writing and Preparation in Professional Management Expertise Center (PMEC).
- Communications skills.
HSE Skills:
During my service, HSE skills have been remained as Top priority and working towards continual
improvement followings:
- Safe commissioning procedure and Permit to Work System.
- Job Hazardous Analysis and process risk management.
Fire /gas alarm and first Aids skill at work site.-
- Impart colleagues H2S and SO2 skilled upgrade course at field (awareness/escape).
- Working safely with high H2S contents areas.
Personal Information:
Full Name: Mohamed Mostafa Mohamed Mohamed
Date of Birth: 25- February-1984
Place of Birth: Cairo, Egypt.
Present Address: Abu Dhabi
Military Status: Exempted
Marital Status: Married
Passport number: A09298687
Oman residence until November - 2017
UAE Residence until August - 2018
E-mail address: eng.mohamed_mostafa@yahoo.com
GSM EGYPT: 002- 01003074086 / 002- 01149252549
GSM ABU DHABI: +971- (0)504099687