Bharathkumar has over 13 years of experience as a piping and pipeline designer. He has worked on oil, gas, and petrochemical projects in Oman, Italy, India, and Singapore. His responsibilities include preparing piping layouts, isometric drawings, material takeoffs, and fabrication drawings. He is proficient in AutoCAD, PDMS, Navisworks, and other piping design software. Bharathkumar holds a Diploma in Mechanical Engineering and safety certifications.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
More than 9 years’ hand on experience in the fields of Drafting, Designing, fabrication and Construction of Static Equipments, Piping and Steel Structure in Different Engineering and EPC Companies.
Dear Sir/Madam,
I am Anas M. H, a Mechanical Engineer by qualification working in Cochin Shipyard Limited INDIA as Piping Engineer. I have more than 6 years of experience in Ship Building & Ship Repair.I had 3 months work Experience in DRYDOCKS WORLD DUBAI.Due to some health problems,I resigned from there..
I am looking forward to the next challenge that draws on my professional experience. Attached herewith is my resume for your kind reference. If my qualification and experience suits for any vacancy in your reputed organization, kindly arrange for a face to face or phone in interview.
Looking forward to hear from you soon in this regard.
Thanks & Best regards,
Anas M. H
Skype ID: anasmanganattu1@skype.com
INDIA:+919747265577,+919037066990
More than 9 years’ hand on experience in the fields of Drafting, Designing, fabrication and Construction of Static Equipments, Piping and Steel Structure in Different Engineering and EPC Companies.
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Senior Pipeline/ Piping Mechanical Engineer Construction & CommissioningMohamed Mustafa
Highly ambitious and self-motivated Project Management Professional with over 10 years in the Oil & Gas Industry in the fields of Project Construction & Commissioning. All experience enhanced by multi-functional business trips in United Arab Emirates, Oman, Algeria and Egypt for large scale EPC projects with Major EPC and Petroleum companies’ region.
Senior Supervisor Piping & Mechanical
Piping &Pipe Line Fabrication/Erection&/ Hydro test /Mechanical Completion Pre-Commissioning
I have around17+, years ‘work experience I have done three years diploma inMechanical engineering,
I have worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical.
CV of Karan Vinayak - piping design engineerKaran Vinayak
I have experience in the field of Oil and Gas, Chemical Process Plant and Water Transmission Network Pipeline. (Piping Layout, Piping GAD, isometric, Bill of Materials, Pipeline Profile, Alignment Sheet, Co-Ordinate Drawing). I have software skills in Autocad, Autoplant, PDMS and CAESAR-II. Currently I am working in Sharjah on UG Water Pipeline Projects.
I am technically qualified for job positions like Piping/Pipeline Designer, Piping/Pipeline Engineer, Piping Quantity Estimator etc.
Hello,
I am interested for Sr. PDMS piping designer position. I am having total 15 years’ experience in oil gas projects.
Regards,
Pritam
+971-503631241
Abu Dhabi
1. BHARATHKUMAR.G.T
Piping / Pipeline Designer
new_bharath2005@yahoo.com
GSM : +968 - 99863302, 94072838.
PROFESSIONAL OBJECTIVE
To hold a challenging position and implement innovative ideas in an Organization that provides a platform for
knowledge enrichment and career growth. Acquire new skills and Contribute constrictively to the organization,
there by equipping myself to become a future leading professional.
RESUME SUMMARY
• Total 13 years in that 9 years Experience as Piping / Pipeline Designer Detailed Design and Engineering in
Oil and Gas, Refinery and Petrochemical Facilities. Experience on-site and at home office assignment.
• Expertise in Piping and Pipeline Layout Design and Detail engineering with exposure to on-site
troubleshooting.
• Worked in Saipem Projects Liverno FSRU Offshore LNG Toscana Italy. In Dubai for two years.
• Worked in Shutdown projects in Exxon mobile by PEC. In Singapore for six months.
• Involved in EPC Projects - Client Daleel, Orphic, Otto & Pttep Oman.
• ACT Apprentice Training in Chennai Petroleum Co-Operation Ltd, Manali, Chennai on August 2013 to
July 2004.
AREA OF STRENGTH / HIGHLIGHTS
Preparation, Checking & Co-ordination of Piping and Plant Layout Drawings including plot plan, piping
plan, Equipment layout, area division and piping route layout drawings.
Preparation & Checking of piping routing and Pipeline alignment drawings.
Preparation of Nozzle orientations for Vessels and column and Piping-Clash review using PDMS.
Checking of all piping plan and Isometrics drawings as per Client's Specification and site notes.
Preparation and checking Material Take off.
Isometric drawings extractions using PDMS.
Working with various international Standard ASME, ASTM, API, AWWA and Marine Standards.
SOFTWARE KNOWLEDGE
• AutoCAD 2007,2008,2010.2012-P&ID.
• PDMS - Piping.
• Navis Works 3.0 - For Clash Checking.
• Mariner - For Mto's Entry and Extrac.
• Microsoft office - Word and Excel.
EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering - Year 2002 April.
From : Sri Nallalaghu Polytechnic, Puzhal, Chennai, Tamilnadu.
HSE COURSE
HSE Induction Training, H2S Training, Initial Fire Response Training, Other HSE Training.
Page 1
2. Gas Monitoring Testing Course in Singapore.
CURRENT PROJECT EXPERIENCE
Project Title : Shams -20,Shams-14,Shams-21 Flowline Project.
Client : PTTEP-Oman- Prime Teknica LLC, Oman.
Project Title : Muscat Sohar Crude Pipeline 24'' Repair Work.(On Going)
Client : Oman Refineries and Petrochemicals Company LLC.(ORPIC)-MAF.
Project Title : EPCIC for Upgrade of WI (Water Injection) & WTP Facilities at B- Block Station.
Client : Daleel Petroleum LLC, Oman.
Project Title : EPCC for the Installation of Additional new Pump P-2201 C.
Client : Oman Refineries and Petrochemicals Company LLC.(ORPIC)-SOHAR.
Project Title : Avv Installation at Ooto Terminal.
Client : Oman Oil Tanking-ODFJELL LLC.(OOTO)-SOHAR.
Project Title : Shams -15 Flowline Project.
Client : PTTEP-Oman- Prime Teknica LLC, Oman.
Job Responsibilities:
• Preparation of Plot Plan, Piping GAD(General Arrangement Drawing), Piping Isometrics, Pipeline route
Plan and alignment sheet Drawings.
• Checking and Preparing of Bill of Quantities for Piping as per PMS.
• Preparation of Equipment layouts with inter connecting piping plan and support location drawing with
detail support fabrication arrangements.
• Preparation of Fabrication Drawing of Vessels, Spool Drawings, Modifications of Storage tank, Pipe
Support and Structural Detail Drawings for Pump Sheds.
• Preparation of Tank Modification Drawings as per Projects Specification.
• Preparation of Spool List for Roto Lining and PE lining as per Vendor requirement.
• Preparation of Chemical Injections Skid Detail Drawing Plan & Section(Piping & Structural).
• Onsite survey for the checking P&ID and As Built ISO to check the drawings issued by subcontractors.
• To find out the Existing Tie-in and re-routing the piping without Clash as per Site Condition.
• To Maintain the Drawing Register for Tracking and Need list from Client Side.
PREVIOUS PROJECT EXPERIENCE
Project Title : DM/Softener for Project no. 1 x 25 mw Captive Power Plan.
Page 2
Working as Piping / Pipeline Designer with Arabian Oil and Gas Field Service llc, Oman from July
2012 to Till Date.
Worked as Piping Designer with G.E.T Solution Pvt, Ltd, Chennai from April 2011 to June 2012.
3. Client : Suryalakshmi Cotton Mills Ltd,
Project Title : DM/1x20.28mw Gas turbine Power Plant at Duliajan .
Client : Oil India Ltd, Duliajan, Assam.
Job Responsibilities:
• Preparation of Plot Plan, Piping GAD(General Arrangement Drawing), Equipment Layout, Piping
Isometrics Drawings.
• Checking & Co-ordination all type of Piping and Plant layout Drawing activities.
• Co-ordination with other departments for all Piping Deliverables.
• Preparation of Process Drawing which includes Process flow Diagrams and P&ID as per input.
• Checking and Preparing bill of materials for line isometrics, pipe supports and MTO for total project.
• Development and checking GA drawings for fabrication. Storage Tanks, Vessel, Piping Support Details,
Spool Drawings, Skid Details Drawings, Frontal piping for Vessels.
• Experience in Preparation of "As-Built'' of Piping routings, isometric, supports as per the site query.
• Preparation of Materials Requisitions raised for Purchase Requisitions
Project Title : Liverno FSRU OLT (Offshore LNG Toschana Italy)
Client : Saipem Engineering Services.
Project Title : Aquila Phase-2 (FPSO) .
Client : Saipem Engineering Services S.P.A Leases FPSO Division.
Job Responsibilities:
• Preparation and Checking of Piping GAD (General Arrangement Drawing), Piping Isometrics Drawings and
Spool Fabrication Drawings.
• Modeling the pipe routing with respect to Corresponding P&ID and Piping Specification.
• Preparation of Nozzle orientations for Vessels and column and Piping-Clash review using PDMS.
• Preparation of GA drawing by using PDMS DRAFT Module for above Systems.
• Extraction and checking of Piping Isometrics from PDMS.
• Preparation of Piping Re-Routing as per on-board situation.
• Preparation of Piping Support Detail Drawing and Checking with Existing Pipes and Support without
Clashing in On-board.
• Preparation of Fire Fighting, Drain line, Flare line and Detail Drawings.
• Preparation of Test Pack as per Material Standard and Specification for Projects Requirement.
• Preparation of support fabrication drawing and MTO’s for piping and supports.
• Checking and Preparing of Bill of Quantities for Piping & Structural Materials.
• Preparation of Structural Detail Drawing for Pump Shed, Piping Supports etc.
• Preparation of Spool wise MTO entry in MARINER software system and extract the MTO.
Page 3
Worked as Piping Draughtsman with VA Tech Wabag Ltd, Alwarpet, and Chennai from Dec 2006 to
September 2009.
Worked as Piping Designer with Dry Docks World -Dubai, Engineering Design Department -
Deputated for Essen Global llc, Dubai from Oct 2009 to March 2011.
4. Project Title : Durgapur Steel Thermal Power Station (2X 500 mw)
Client : Damodar Valley Corporation (DVC).
Project Title : Construction of 1000 m3/day effluent treatment plant at sobhasan
Client : Oil & Natural Gas Corporation Ltd.
Project Title : Panipet naphtha cracker project, India EPC-6 RD DM plant
Client : Indian Oil Corporation Ltd.
Job Responsibilities:
• Preparation of Plot plan, Equipment Layout and Piping GA Drawings.
• Preparation of Process Drawing which includes Process Flow Diagrams(PFD) & Process & Instrumentation
Diagrams (P&ID) as per Input.
• Preparation of Isometric drawings with Complete Bill of Materials as per Specification.
• Preparation of Pipe Support foundation layout and Detail Drawings.
• Preparation of fabrication details for mechanical equipments such as Tanks, Structural Platform works.
• Preparation of Duct Routing GAD, Detailing and Development Drawing as per input.
• Extracting of bill materials.
• Co-coordinating with Other Departments.
• Preparation of As Built Drawings as per Site Survey.
Involved in Shutdown Projects are : Exxon Mobile , Singapore Refinery Company (SRC), Seraya Power Plant in
Jurong island, Singapore.
Job Responsibilities:
• Preparation of Re-Routing Piping Drawings.
• Preparation of Piping isometric and Spool Drawings.
• Generation of GA and fabrication details for mechanical equipments such as tanks, Structural works..,
• Extracting of bill materials.
• Preparation of As-Built Drawings for Piping and Structural works.
• Site survey and site Verification.
Job Responsibilities:
• Preparation of General Arrangement Drawing.
Page 4
Worked as Piping Draughtsman with Ahmar Engineering Ltd, Manali, Chennai. from August 2004
to Feb 2006
Worked as Piping Draughtsman with Plant Engineering Construction, Pvt ltd,(PEC) Singapore,
from March 2006 to Nov 2006 (Short Term Job for Six Month).
5. • Preparation of Isometrics drawings with complete Bill of Materials as per Specifications.
• Preparation of Pipe Support layout & Detail Drawings.
• Preparation of as built drawing as per site survey.
Personal Details:
Name : G.T.BharathKumar
Father's Name : M.G.Thiyagarajan (Late).
Date of Birth : 25-07-1982.
Gender : Male
Nationality : Indian
Marital Status : Single
Linguistic Abilities : English & Tamil.
Email : new_bharath2005@yahoo.com
Permanent Address : No32, Perumal Koil Street,
Edaimanagar, M.M.C Post,
Chennai-600051.
Oman Driving License Details:
Issue at: Muscat
License Number: 91591545
Passport Details:
Passport Number : L 9529856 (valid till 02/06/2024).
Place of Issue : Muscat-Oman.
Declaration:
I hereby declare that the above-Mentioned details are true to the best of my Knowledge.
Place : Muscat-Oman.
Date : (G.T.BharathKumar).
Page 5
Worked as ACT Apprentice Training with Chennai Petroleum Co-Operation Ltd,Manali,Chennai.
from August 2003 to July 2004.
6. • Preparation of Isometrics drawings with complete Bill of Materials as per Specifications.
• Preparation of Pipe Support layout & Detail Drawings.
• Preparation of as built drawing as per site survey.
Personal Details:
Name : G.T.BharathKumar
Father's Name : M.G.Thiyagarajan (Late).
Date of Birth : 25-07-1982.
Gender : Male
Nationality : Indian
Marital Status : Single
Linguistic Abilities : English & Tamil.
Email : new_bharath2005@yahoo.com
Permanent Address : No32, Perumal Koil Street,
Edaimanagar, M.M.C Post,
Chennai-600051.
Oman Driving License Details:
Issue at: Muscat
License Number: 91591545
Passport Details:
Passport Number : L 9529856 (valid till 02/06/2024).
Place of Issue : Muscat-Oman.
Declaration:
I hereby declare that the above-Mentioned details are true to the best of my Knowledge.
Place : Muscat-Oman.
Date : (G.T.BharathKumar).
Page 5
Worked as ACT Apprentice Training with Chennai Petroleum Co-Operation Ltd,Manali,Chennai.
from August 2003 to July 2004.