Radar system using arduino
•
14 likes•14,307 views
This document describes the design and implementation of a radar system using an Arduino. The system uses an Arduino Uno, ultrasonic sensor, servo motor, and other components to detect objects. It provides advantages such as seeing through fog or darkness and determining an object's range, position, and velocity. Limitations include not being able to distinguish close targets or recognize color. The system was created to learn about radar technology and demonstrate its uses and capabilities.
Report
Share
Report
Share
Download to read offline
Recommended
Radar Using Arduino
Rader is an object detection system. It uses Microwaves to determine the range, altitude, direction, or speed of objects. The radar can transmit radio waves or microwaves which bounce off any object in their path. So, we can easily determine any object in the radar range. Adruino is a single-board microcontroller to make electronics more discipline. The radar system has different performance specifications and also it comes in a verity of size.
An Arduino radar project is more than a visual project because of its circuit implementation. There are different hardware use to accomplish the Arduino Radar Sensor. Like as, Arduino UNO. HC-SRo4 Ultrasonic Sensor including a Servo Motor. The main appearance is the visual narration in the Processing Application.
It is very simple, the Ultrasonic Sensor collects the object information with the help of Arduino and passes it to Processing Application. In the processing application, there is a simple Graphics application implemented which mimic a radar screen.
Radar System with Arduino Processor
Radar System with Arduino Processor
with servo motor
with hcsr04 ultrasonik sensor
with piezo buzzer
Visual Studio C# Form Application
GUI
Arduino radar system
Radar Arduino system is a simulation of radar using various micro-components. Ultrasonic sensor is used to detect and measure the distance of an obstacle. Simulation has been performed on Tinkercad software.
Obstacle Avoidance ROBOT using ARDUINO
This is a presentation of OBSTACLE AVOIDANCE ROBOT. which has the details on making an obstacle avoider using arduino uno, ultrasonic sensor. This presentation has the detailed description of all the components that are being used in making. And also circuit diagram and flow chart of the robot.
Ultrasonic radar mini project
The document summarizes an ultrasonic radar project presented by students. It includes an introduction to radar technology and ultrasonic sensors. It describes the components used - an Arduino board, ultrasonic sensor, and servo motor. It explains how ultrasonic pulses detect distance and the servo motor rotates the sensor to map surroundings. Distances are plotted on a graph using Processing IDE to simulate radar detection of objects. Potential applications of radar technology are discussed like air traffic control and security systems.
Arduino Radar System
This document describes an ultrasonic radar system using an Arduino microcontroller and Android application. It provides an introduction, explains the sensor handling procedure, reviews existing similar systems, highlights advantages of this system such as displaying results on a phone screen with angle detection, and includes class/block diagrams, equipment details, a user manual, and conclusion.
RADAR SYSTEM
This document provides an introduction to radar surveillance systems. It explains that radar uses radio waves to detect objects by emitting signals that bounce off objects and return to the receiver. The time it takes allows the radar to calculate distance. The document outlines the components of a radar system including ultrasonic sensors to collect data, an Arduino microcontroller to calculate distance, a servo motor to direct the sensor, and an LCD display to output results. It provides code snippets and diagrams of the system and discusses applications in security, traffic control, and more. In conclusion, the document discusses the advantages of radar and potential future applications like self-driving cars.
Minor Project Report on - short range personal 'RADAR'.
Short range personal 'RADAR' also known as IR obstacles detector, it is use to detect the objects using ir sensor.
Recommended
Radar Using Arduino
Rader is an object detection system. It uses Microwaves to determine the range, altitude, direction, or speed of objects. The radar can transmit radio waves or microwaves which bounce off any object in their path. So, we can easily determine any object in the radar range. Adruino is a single-board microcontroller to make electronics more discipline. The radar system has different performance specifications and also it comes in a verity of size.
An Arduino radar project is more than a visual project because of its circuit implementation. There are different hardware use to accomplish the Arduino Radar Sensor. Like as, Arduino UNO. HC-SRo4 Ultrasonic Sensor including a Servo Motor. The main appearance is the visual narration in the Processing Application.
It is very simple, the Ultrasonic Sensor collects the object information with the help of Arduino and passes it to Processing Application. In the processing application, there is a simple Graphics application implemented which mimic a radar screen.
Radar System with Arduino Processor
Radar System with Arduino Processor
with servo motor
with hcsr04 ultrasonik sensor
with piezo buzzer
Visual Studio C# Form Application
GUI
Arduino radar system
Radar Arduino system is a simulation of radar using various micro-components. Ultrasonic sensor is used to detect and measure the distance of an obstacle. Simulation has been performed on Tinkercad software.
Obstacle Avoidance ROBOT using ARDUINO
This is a presentation of OBSTACLE AVOIDANCE ROBOT. which has the details on making an obstacle avoider using arduino uno, ultrasonic sensor. This presentation has the detailed description of all the components that are being used in making. And also circuit diagram and flow chart of the robot.
Ultrasonic radar mini project
The document summarizes an ultrasonic radar project presented by students. It includes an introduction to radar technology and ultrasonic sensors. It describes the components used - an Arduino board, ultrasonic sensor, and servo motor. It explains how ultrasonic pulses detect distance and the servo motor rotates the sensor to map surroundings. Distances are plotted on a graph using Processing IDE to simulate radar detection of objects. Potential applications of radar technology are discussed like air traffic control and security systems.
Arduino Radar System
This document describes an ultrasonic radar system using an Arduino microcontroller and Android application. It provides an introduction, explains the sensor handling procedure, reviews existing similar systems, highlights advantages of this system such as displaying results on a phone screen with angle detection, and includes class/block diagrams, equipment details, a user manual, and conclusion.
RADAR SYSTEM
This document provides an introduction to radar surveillance systems. It explains that radar uses radio waves to detect objects by emitting signals that bounce off objects and return to the receiver. The time it takes allows the radar to calculate distance. The document outlines the components of a radar system including ultrasonic sensors to collect data, an Arduino microcontroller to calculate distance, a servo motor to direct the sensor, and an LCD display to output results. It provides code snippets and diagrams of the system and discusses applications in security, traffic control, and more. In conclusion, the document discusses the advantages of radar and potential future applications like self-driving cars.
Minor Project Report on - short range personal 'RADAR'.
Short range personal 'RADAR' also known as IR obstacles detector, it is use to detect the objects using ir sensor.
Iot based health monitoring system
This document describes an IoT-based health monitoring system created by three group members. The system uses sensors to measure a patient's heartbeat and temperature, which are sent wirelessly to a monitoring center. The monitoring center allows for real-time analysis of the vital sign data and emergency alerts. The system aims to allow doctors to remotely monitor patients at low cost using embedded technology.
Obstacle detection Robot using Ultrasonic Sensor and Arduino UNO
This document describes how to build an obstacle detection robot using an Arduino UNO, ultrasonic sensor, and motor driver module. It explains the components used, including the Arduino, ultrasonic sensor to detect obstacles from 2-400cm away, and an L298N motor driver module to control DC motors. It provides details on connecting the components, programming the ultrasonic sensor to trigger and receive echo signals to determine distances, and controlling the motor's direction depending on detected obstacles to help the robot navigate. Code and more details are available at the provided GitHub link.
Ultrasonic radar using 8051
The document summarizes a technical seminar presentation on an ultrasonic radar system using a microcontroller. It describes the system architecture which includes a 8051 microcontroller, ultrasonic sensor, buzzer, and servo motor. It provides details on the implementation including interfacing these components and operating voltages. Advantages include ability to work in adverse conditions and high sensing distances. Applications discussed include target detection and traffic enforcement. The conclusion states the designed project can detect objects within 30cm and provide audio alerts.
HAND GESTURE CONTROLLED WHEEL CHAIR
This project is to develop a wheel chair for physically disabled people
The wheel chair is controlled by hand movement/hand gestures
The gestures are recognized by an accelerometer sensor
An ultrasonic sensor is used to detect the obstacles in front of the chair
The signals from the sensors are processed, and the wheel chair is controlled by Atmega-328 micro controller
arduino based radar system
This document describes the design and implementation of an Arduino-based radar system using an ultrasonic sensor. It discusses the sensor handling procedure, existing similar systems, the system block diagram, components used, performance, a demonstration of it working, and advantages of this system. The system allows an Arduino board to detect distances using ultrasonic pulses and transmit the data to an Android device over Bluetooth.
Women safety device with gps tracking and alerts
This document describes a women's safety device project that uses GPS tracking and alerts. The system uses an Arduino Uno microcontroller connected to a GPS module, GSM module, fingerprint scanner and other components. It allows a woman in distress to activate alerts by fingerprint or button press, which then sends her location via SMS to predefined numbers. The system provides dual security by tracking a woman's location even if she cannot press the panic button. It is designed for safety but has limitations like size, battery dependence and need for SIM card. Potential applications include child tracking and vehicle integration for increased safety.
Distance Measurement by Ultrasonic Sensor
It is designed to measure the distance of any object by using an ultrasonic transducer. Ultrasonic means of distance measurement is a convenient method compared to traditional one using measurement scales.This kind of measurement is particularly applicable to inaccessible areas where traditional means cannot be implemented such as high temperature, pressure zones etc.
password based door locking system using 8051
This document describes a password-based door locking system using an 8051 microcontroller. The system includes a keypad to enter a password, which is checked against a stored password. If the passwords match, the gate opens. Otherwise, an alarm is activated. The hardware requirements include an 8051 microcontroller, keypad, LCD, relay, motor, resistors, capacitors, crystal oscillator, voltage regulator, and momentary switch. The software includes Keil compiler, Flash Magic, and Proteus. A circuit diagram is provided. Advantages are security, low power consumption, and simple design using common components. Applications include home security and controlling access to secure areas.
Voice controlled robot ppt
bluetooth controlled robot
voice controlled by android app created on MIT app inventor
arduino IDE used for ardino uno R3
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Obstacle avoiding robot.doc
Obstacle Avoiding Robot
Robotics is a branch of science that deals with Mechanical, Electrical and Software fields. Robots are the machines that are used in our day-to-day to life to reduce men power and work accurately without any distortions. Robots can be classified into two different sections basing upon their skills as Automated and Manual. Obstacle detector is a Automated robot which itself recognizes the obstacle in its path and moves in free direction. Robot detects the obstacle by using two IR Sensors placed in front.
The IR sensors are placed on left and right side of the robot through which continuous Infrared radiation is emitted for detection of obstacles in the path. These IR Sensors are connected to a controlling element AT89c51 µc. When a obstacle is placed in the path of robot IR beam is reflected to the sensor from the obstacle. On detecting obstacle in the path sensor sends 0 volts to µc. This 0 voltage is detected by Microcontroller which avoids the obstacle by taking left or right turn. Similarly if the sensor sends +5v to Microcontroller, the Microcontroller assumes it as clear path and makes the robot to move in straight.
Two motors namely right motor and left motor are connected to Motor driver IC (L293D). L293D is interface with Microcontroller. Microcontroller sends logic 0 & logic 1 as per the programming to driver IC which makes motors to rotate in clockwise and anticlockwise direction. Wheels attached to the motors rotate accordingly with the motor shaft causing in the moment of the robot by wheels. In front portion of the robot a free wheel is attached to move the robot easily in any direction as per the requirement.
A 12Volts DC battery is attached to the circuit. As the microcontroller and sensors requires only 5v, set of resistors and capacitors are used to supply 5v DC to them. Power Management System is not maintained in the circuit as the battery can be removed after the usage of robot. So it does not cause any loss in the power of battery.
This type of robots has multiple applications in various fields. They can be used to know the strength of the opposite army in defense system. They can be used as floor and wall cleaners. They are used in automated GPS vehicles to calculate the moment of the vehicle overhead. These robots are easy to construct and cheaper in cost with long durability.
Obstacle avoiding robot(Lab report)
This project report describes an obstacle avoiding robot created by a student group. The robot uses an ultrasonic sensor to detect obstacles in its path and a microcontroller to control two motors to navigate around obstacles. When the sensor detects an obstacle within 20cm, the microcontroller directs the robot to turn left. Otherwise, it moves straight. The report provides details on the robot's design, components, circuit diagram, algorithm, and testing process. It also discusses potential applications and future improvements.
Personal radar ppt 1
The document summarizes a student project to design a short range personal infrared radar system. The system will use an infrared sensor that rotates 180 degrees to detect objects from 10cm to 500cm away. When an object is detected, the microcontroller will activate an alarm sound and display the distance on an LCD screen. It will also illuminate an LED in the direction of the detected object. The students will survey literature on similar infrared and ultra-wideband radar systems and use software like MPLAB and Proteus to program the microcontroller and simulate the system. Potential applications include home security, parking assistance, and driving aids.
Traffic light controller
My new upload !!! --> http://www.slideshare.net/choleraparth91/smart-vehicle-ensuring-safe-ride-using-accerolometer-laser-sensor-co-sensor-and-also-with-use-of-gsm-modem-and-solar-panel
Contact & follow me to get PDF & PPT file - https://www.linkedin.com/in/parthcholera/
Email me directly if you want these file !!
choleraparth91@yahoo.com
or
contact me on fb - https://www.facebook.com/choleraparth91
or
https://www.facebook.com/Textivity
or
message me on - 08097508067
I suggest to go for these project !!! :D :D
B.Tech.Final Year ECE Project Report on Ultrasonic distance measure robot
ULTRA-4 or ultrasonic distance measure robot is a robot which perform many action such as it gives the actual position of wall or obstacle which comes in front of it, measures the distance which displayed by 7-segment and also show the moving images of the objects by camera.
The application area of ultra-4 is very wide such as rescue oprations, spy robot, versatile use in autonomus technology,use in mining,it has found essential use in light industry (e.g. toy industry) agriculture and power engineering and used in car parking system.
Distance measurement using Ultrasonic sensor on Arduino Uno
The PPT contains a small presentation for mini-project that can be made to measurement distance using Ultrasonic sensor on Arduino Uno
Ultrasonic sensor
The ultrasonic sensor transmits ultrasonic waves above 20 kHz and detects the reflected waves with a receiver to measure distance. The HC-SR04 module can measure distances from 2 to 400 cm with 5V power and works by sending a 10 microsecond trigger signal to initiate a transmission, then measuring the echo pulse width to calculate the distance. Ultrasonic sensors can be used to measure distance, level, presence and more without contact and have applications in obstacle detection robots, parking assistance systems and more.
Arduino Interfacing with different sensors and motor
1. Interface a sensor/s, device/s with Arduino for data acquisition and display the data.
2. Interface Actuators with Arduino to Control motion to build an application.
3. Build a mechatronic system using Arduino, sensors, actuators and modules.
Ultrasonic based distance meter
This document summarizes a mini project report on an ultrasonic distance meter submitted for a Bachelor of Technology degree. It includes an introduction, history of distance measurement techniques, circuit diagram, implementation details of the ultrasonic distance meter using an ATmega8 microcontroller, ultrasonic sensor, LCD display and buzzer. It also includes the block diagram, sample output, advantages, source code, conclusion and outlook for future improvements. The project involves designing and developing an ultrasonic distance measurement system to measure distances up to 4 meters without contact.
PIR sensing with arduino
The project uses a PIR motion sensor to detect motion and trigger a camera. An Arduino microcontroller coordinates and controls the system, activating the camera when the PIR sensor detects motion.
Radar system
This document provides an overview of radar systems. It discusses the history, principle, basic design, and applications of radar. Radar was developed in the early 1900s and uses radio waves to detect and measure the range of objects. The basic components of a radar system include a transmitter, receiver, antenna, and display. Radar has military, air traffic control, remote sensing, and other applications. It has advantages such as ability to see through various mediums but also disadvantages like inability to distinguish close targets.
Radar and it's applications
RADAR stands for Radio Detection And Ranging. It uses electromagnetic waves to identify the range, altitude, direction or speed of objects. Early forms of radar detected ships to avoid collisions. Modern radar is used for military defense, air traffic control, law enforcement, weather monitoring and more. Key components of a radar system include a transmitter, receiver, synchronizer and duplexer. Radar works by transmitting pulses and measuring the time it takes for the echo signal to return from an object.
More Related Content
What's hot
Iot based health monitoring system
This document describes an IoT-based health monitoring system created by three group members. The system uses sensors to measure a patient's heartbeat and temperature, which are sent wirelessly to a monitoring center. The monitoring center allows for real-time analysis of the vital sign data and emergency alerts. The system aims to allow doctors to remotely monitor patients at low cost using embedded technology.
Obstacle detection Robot using Ultrasonic Sensor and Arduino UNO
This document describes how to build an obstacle detection robot using an Arduino UNO, ultrasonic sensor, and motor driver module. It explains the components used, including the Arduino, ultrasonic sensor to detect obstacles from 2-400cm away, and an L298N motor driver module to control DC motors. It provides details on connecting the components, programming the ultrasonic sensor to trigger and receive echo signals to determine distances, and controlling the motor's direction depending on detected obstacles to help the robot navigate. Code and more details are available at the provided GitHub link.
Ultrasonic radar using 8051
The document summarizes a technical seminar presentation on an ultrasonic radar system using a microcontroller. It describes the system architecture which includes a 8051 microcontroller, ultrasonic sensor, buzzer, and servo motor. It provides details on the implementation including interfacing these components and operating voltages. Advantages include ability to work in adverse conditions and high sensing distances. Applications discussed include target detection and traffic enforcement. The conclusion states the designed project can detect objects within 30cm and provide audio alerts.
HAND GESTURE CONTROLLED WHEEL CHAIR
This project is to develop a wheel chair for physically disabled people
The wheel chair is controlled by hand movement/hand gestures
The gestures are recognized by an accelerometer sensor
An ultrasonic sensor is used to detect the obstacles in front of the chair
The signals from the sensors are processed, and the wheel chair is controlled by Atmega-328 micro controller
arduino based radar system
This document describes the design and implementation of an Arduino-based radar system using an ultrasonic sensor. It discusses the sensor handling procedure, existing similar systems, the system block diagram, components used, performance, a demonstration of it working, and advantages of this system. The system allows an Arduino board to detect distances using ultrasonic pulses and transmit the data to an Android device over Bluetooth.
Women safety device with gps tracking and alerts
This document describes a women's safety device project that uses GPS tracking and alerts. The system uses an Arduino Uno microcontroller connected to a GPS module, GSM module, fingerprint scanner and other components. It allows a woman in distress to activate alerts by fingerprint or button press, which then sends her location via SMS to predefined numbers. The system provides dual security by tracking a woman's location even if she cannot press the panic button. It is designed for safety but has limitations like size, battery dependence and need for SIM card. Potential applications include child tracking and vehicle integration for increased safety.
Distance Measurement by Ultrasonic Sensor
It is designed to measure the distance of any object by using an ultrasonic transducer. Ultrasonic means of distance measurement is a convenient method compared to traditional one using measurement scales.This kind of measurement is particularly applicable to inaccessible areas where traditional means cannot be implemented such as high temperature, pressure zones etc.
password based door locking system using 8051
This document describes a password-based door locking system using an 8051 microcontroller. The system includes a keypad to enter a password, which is checked against a stored password. If the passwords match, the gate opens. Otherwise, an alarm is activated. The hardware requirements include an 8051 microcontroller, keypad, LCD, relay, motor, resistors, capacitors, crystal oscillator, voltage regulator, and momentary switch. The software includes Keil compiler, Flash Magic, and Proteus. A circuit diagram is provided. Advantages are security, low power consumption, and simple design using common components. Applications include home security and controlling access to secure areas.
Voice controlled robot ppt
bluetooth controlled robot
voice controlled by android app created on MIT app inventor
arduino IDE used for ardino uno R3
Fire fighting robot ppt
The document describes an automatic firefighting robot that can detect and extinguish fires. It uses sensors to detect temperature, smoke, and flames. If the sensors detect a fire, the microcontroller activates a water pump to extinguish it. The robot reduces human labor needed for firefighting and decreases damage from fires. It is designed to monitor hazardous areas for natural disasters and bomb explosions.
Obstacle avoiding robot.doc
Obstacle Avoiding Robot
Robotics is a branch of science that deals with Mechanical, Electrical and Software fields. Robots are the machines that are used in our day-to-day to life to reduce men power and work accurately without any distortions. Robots can be classified into two different sections basing upon their skills as Automated and Manual. Obstacle detector is a Automated robot which itself recognizes the obstacle in its path and moves in free direction. Robot detects the obstacle by using two IR Sensors placed in front.
The IR sensors are placed on left and right side of the robot through which continuous Infrared radiation is emitted for detection of obstacles in the path. These IR Sensors are connected to a controlling element AT89c51 µc. When a obstacle is placed in the path of robot IR beam is reflected to the sensor from the obstacle. On detecting obstacle in the path sensor sends 0 volts to µc. This 0 voltage is detected by Microcontroller which avoids the obstacle by taking left or right turn. Similarly if the sensor sends +5v to Microcontroller, the Microcontroller assumes it as clear path and makes the robot to move in straight.
Two motors namely right motor and left motor are connected to Motor driver IC (L293D). L293D is interface with Microcontroller. Microcontroller sends logic 0 & logic 1 as per the programming to driver IC which makes motors to rotate in clockwise and anticlockwise direction. Wheels attached to the motors rotate accordingly with the motor shaft causing in the moment of the robot by wheels. In front portion of the robot a free wheel is attached to move the robot easily in any direction as per the requirement.
A 12Volts DC battery is attached to the circuit. As the microcontroller and sensors requires only 5v, set of resistors and capacitors are used to supply 5v DC to them. Power Management System is not maintained in the circuit as the battery can be removed after the usage of robot. So it does not cause any loss in the power of battery.
This type of robots has multiple applications in various fields. They can be used to know the strength of the opposite army in defense system. They can be used as floor and wall cleaners. They are used in automated GPS vehicles to calculate the moment of the vehicle overhead. These robots are easy to construct and cheaper in cost with long durability.
Obstacle avoiding robot(Lab report)
This project report describes an obstacle avoiding robot created by a student group. The robot uses an ultrasonic sensor to detect obstacles in its path and a microcontroller to control two motors to navigate around obstacles. When the sensor detects an obstacle within 20cm, the microcontroller directs the robot to turn left. Otherwise, it moves straight. The report provides details on the robot's design, components, circuit diagram, algorithm, and testing process. It also discusses potential applications and future improvements.
Personal radar ppt 1
The document summarizes a student project to design a short range personal infrared radar system. The system will use an infrared sensor that rotates 180 degrees to detect objects from 10cm to 500cm away. When an object is detected, the microcontroller will activate an alarm sound and display the distance on an LCD screen. It will also illuminate an LED in the direction of the detected object. The students will survey literature on similar infrared and ultra-wideband radar systems and use software like MPLAB and Proteus to program the microcontroller and simulate the system. Potential applications include home security, parking assistance, and driving aids.
Traffic light controller
My new upload !!! --> http://www.slideshare.net/choleraparth91/smart-vehicle-ensuring-safe-ride-using-accerolometer-laser-sensor-co-sensor-and-also-with-use-of-gsm-modem-and-solar-panel
Contact & follow me to get PDF & PPT file - https://www.linkedin.com/in/parthcholera/
Email me directly if you want these file !!
choleraparth91@yahoo.com
or
contact me on fb - https://www.facebook.com/choleraparth91
or
https://www.facebook.com/Textivity
or
message me on - 08097508067
I suggest to go for these project !!! :D :D
B.Tech.Final Year ECE Project Report on Ultrasonic distance measure robot
ULTRA-4 or ultrasonic distance measure robot is a robot which perform many action such as it gives the actual position of wall or obstacle which comes in front of it, measures the distance which displayed by 7-segment and also show the moving images of the objects by camera.
The application area of ultra-4 is very wide such as rescue oprations, spy robot, versatile use in autonomus technology,use in mining,it has found essential use in light industry (e.g. toy industry) agriculture and power engineering and used in car parking system.
Distance measurement using Ultrasonic sensor on Arduino Uno
The PPT contains a small presentation for mini-project that can be made to measurement distance using Ultrasonic sensor on Arduino Uno
Ultrasonic sensor
The ultrasonic sensor transmits ultrasonic waves above 20 kHz and detects the reflected waves with a receiver to measure distance. The HC-SR04 module can measure distances from 2 to 400 cm with 5V power and works by sending a 10 microsecond trigger signal to initiate a transmission, then measuring the echo pulse width to calculate the distance. Ultrasonic sensors can be used to measure distance, level, presence and more without contact and have applications in obstacle detection robots, parking assistance systems and more.
Arduino Interfacing with different sensors and motor
1. Interface a sensor/s, device/s with Arduino for data acquisition and display the data.
2. Interface Actuators with Arduino to Control motion to build an application.
3. Build a mechatronic system using Arduino, sensors, actuators and modules.
Ultrasonic based distance meter
This document summarizes a mini project report on an ultrasonic distance meter submitted for a Bachelor of Technology degree. It includes an introduction, history of distance measurement techniques, circuit diagram, implementation details of the ultrasonic distance meter using an ATmega8 microcontroller, ultrasonic sensor, LCD display and buzzer. It also includes the block diagram, sample output, advantages, source code, conclusion and outlook for future improvements. The project involves designing and developing an ultrasonic distance measurement system to measure distances up to 4 meters without contact.
PIR sensing with arduino
The project uses a PIR motion sensor to detect motion and trigger a camera. An Arduino microcontroller coordinates and controls the system, activating the camera when the PIR sensor detects motion.
What's hot (20)
Obstacle detection Robot using Ultrasonic Sensor and Arduino UNO
Obstacle detection Robot using Ultrasonic Sensor and Arduino UNO
B.Tech.Final Year ECE Project Report on Ultrasonic distance measure robot
B.Tech.Final Year ECE Project Report on Ultrasonic distance measure robot
Distance measurement using Ultrasonic sensor on Arduino Uno
Distance measurement using Ultrasonic sensor on Arduino Uno
Arduino Interfacing with different sensors and motor
Arduino Interfacing with different sensors and motor
Similar to Radar system using arduino
Radar system
This document provides an overview of radar systems. It discusses the history, principle, basic design, and applications of radar. Radar was developed in the early 1900s and uses radio waves to detect and measure the range of objects. The basic components of a radar system include a transmitter, receiver, antenna, and display. Radar has military, air traffic control, remote sensing, and other applications. It has advantages such as ability to see through various mediums but also disadvantages like inability to distinguish close targets.
Radar and it's applications
RADAR stands for Radio Detection And Ranging. It uses electromagnetic waves to identify the range, altitude, direction or speed of objects. Early forms of radar detected ships to avoid collisions. Modern radar is used for military defense, air traffic control, law enforcement, weather monitoring and more. Key components of a radar system include a transmitter, receiver, synchronizer and duplexer. Radar works by transmitting pulses and measuring the time it takes for the echo signal to return from an object.
light-detection-and-ranging(lidar)
LIDAR is a remote sensing technology that uses lasers to measure properties of scattered light. It measures the time delay between the transmitted and reflected signals to determine the distance to an object. LIDAR consists of a laser transmitter, receiver, and detector. It uses much shorter wavelengths than RADAR, allowing for higher resolution. Common applications of LIDAR include topographic mapping, atmospheric research, robotics, archaeology, geology, and astronomy.
radar.pptx
radar is about radio detection and ranging.it detects the far objects ,places and identify the distant targets and human beings in any resuce condition.
radarsystemusingarduino-180221152610.pptx
This document describes an Arduino radar system prototype that uses an ultrasonic sensor and servo motor to detect stationary and moving objects. The system transmits sound waves and receives reflections to determine an object's range, angle, and distance. It has advantages over optical systems by being able to see through fog, snow, darkness and distinguish fixed from moving targets and find targets' distances, angular positions, and locations.
LIDAR
Lidar is an acronym for light detection and ranging. It is an optical remote sensing technology that can measure the distance to, or other properties of a target by illuminating the target with light, often using pulses from a laser.
Lidar and sensing
LIDAR is an acronym for light detection and ranging. It is an optical remote sensing technology used to examine the surface of the earth, often using pulses from a laser.
Radar
HEY GUYS,
THIS IS A RADAR PPT. MAKE COMPLETE USE OF IT.
ALSO PLS SUSCRIBE MY YOUTUBE CHANNEL :https://www.youtube.com/channel/UCw1tfmclFubPyhTGLf-I1dQ
LIKE AND SHARE
Lidar
Lidar is an optical remote sensing technology that uses light (often from a pulsed laser) to measure distance. It works by illuminating a target with a laser and analyzing the reflected light. Common components of a lidar system include a laser, scanner/optics, photodetector, and receiver electronics. Lidar has advantages over radar like faster lock-on time and narrower beam spread. Applications include agriculture, mapping, oil/gas exploration, engineering, autonomous vehicles, and atmospheric sensing from aircraft or satellites. Recent advances include lidar speed guns, Google's driverless car which uses lidar for navigation, and autonomous cruise control systems using lidar.
Lidar
LiDAR is an optical remote sensing technology that uses laser light to densely sample the surface of the Earth. It can collect data quickly and accurately to generate precise, 3D information about physical features and terrain. LiDAR systems determine the distance between an object and the sensor by measuring the time delay between transmission and detection of a laser pulse. Key components include a laser, receiver, timing electronics, and computer. Applications of LiDAR include generating high-resolution maps, modeling pollution distribution, monitoring agriculture and forestry, and facilitating autonomous vehicles.
radar communication seminar powerpoint presentation
Radar communication is the use of electromagnetic waves to detect and analyze distant targets. Radar was originally developed for military use in World War II to locate ships and airplanes. It works by transmitting radio pulses toward a target and measuring the time it takes for the reflected pulse to return. There are different types of radar including pulsed radar and continuous wave radar. Radar has many applications including aircraft navigation, ship navigation, ground traffic control, remote sensing and more. It has advantages like all-weather target detection but also disadvantages like inability to recognize color and potential signal interruptions.
Lidar
LIDAR is an acronym for LIght Detection And Ranging. It is an optical remote sensing technology that can measure the distance to or other properties of a target by illuminating the target with light pulse to form an image.
Airborne radar
Airborne radar systems installed in aircraft can detect objects at long ranges and support air combat operations. There are four main types of airborne radar: radar altimeter to measure height above ground, weather radar to detect precipitation, terrain mapping radar, and ground moving target indication radar. Weather radar emits radio waves that reflect off rain droplets and snow crystals, displaying them in color-coded levels of reflectivity on the cockpit display. Pilots use controls to adjust the radar range, gain, and tilt to optimize weather detection and avoidance.
Military radar and satellite switching
This is the content for Satellite Communication and Radar Communication.Types of Military radar and Satellite switching on broad processing.
Lidar
Lidar (also written LIDAR, LiDAR or LADAR) is a remote sensing technology that measures distance by illuminating a target with a laser and analyzing the reflected light. Although thought by some to be an acronym of Light Detection And Ranging,[1] the term lidar was actually created as a portmanteau of "light" and "radar".[2][3] Lidar is popularly used as a technology to make high-resolution maps, with applications in geodesy, geomatics, archaeology, geography, geology, geomorphology, seismology, forestry, remote sensing, atmospheric physics,[4] airborne laser swath mapping (ALSM), laser altimetry, and contour mapping.
Lidar- light detection and ranging
LIDAR is a remote sensing method that uses light in the form of a pulsed laser to measure ranges (variable distances) to the Earth. It can be used to generate precise, three-dimensional information about the structure of objects and terrain. LIDAR involves the measurement of distance to a target by illuminating that target with laser light and measuring the reflected pulses with a sensor. Differences in laser return times and wavelengths can then be used to make digital 3D representations of the target. LIDAR originated in the 1960s and has various applications including terrain mapping, atmospheric studies, robotics, autonomous vehicles, archaeology, geology and forestry.
Lidarpptbysharath copy-140316044543-phpapp01
LIDAR uses laser light to measure distance by illuminating a target and analyzing the reflected light. It can be used to generate highly accurate 3D models of terrain, infrastructure, and other physical features. LIDAR systems consist of a laser, scanner, photodetector, and navigation components. LIDAR has various applications in fields like geography, archaeology, environment, and autonomous vehicles due to its ability to rapidly capture precise spatial data regardless of lighting conditions.
LIDAR
LIDAR uses laser light to measure distance by illuminating a target and analyzing the reflected light. It can be used to generate highly accurate 3D models of terrain, infrastructure, and other physical features. LIDAR systems consist of a laser, scanner, photodetector, and navigation components. LIDAR has various applications in fields like geography, archaeology, environment, and autonomous vehicles due to its ability to rapidly capture precise spatial data regardless of lighting conditions.
1567084176507_1567009886044_Radar signal processing.pdf
Radar signal processing involves sending out radio wave pulses that are reflected off objects to detect their presence, direction, distance, and speed. A radar signal processor performs several key functions, including distance and speed measurement as well as reducing interference. It measures distance by calculating the round trip time of pulses. While radar has advantages like low power consumption and simple circuitry, it also has disadvantages such as potential confusion from multiple targets and limited range description without complex systems.
LIDAR
LIDAR uses pulsed laser light to measure distance by illuminating targets and analyzing reflections. It can be used to create high-resolution 3D maps of physical features and is useful for applications in fields like agriculture, biology, engineering and law enforcement. LIDAR offers advantages over other mapping methods like higher accuracy, faster data collection and greater data density.
Similar to Radar system using arduino (20)
radar communication seminar powerpoint presentation
radar communication seminar powerpoint presentation
1567084176507_1567009886044_Radar signal processing.pdf
1567084176507_1567009886044_Radar signal processing.pdf
Recently uploaded
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsWhy You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Recently uploaded (20)
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Radar system using arduino
- 1. EMBEDDED SYSTEM A RADAR SYSTEM USING ARDUINO
- 2. INTRODUCTION What is Radar? - object-detection system - transmitter producing electromagnetic waves Uses - uses radio waves to determine the range, angle, or velocity of objects - used to detect aircraft, ships, spacecraft, guided missiles, motor vehicles, weather formations, and terrain
- 3. APPARATUS Arduino UNO Ultrasonic Sensor HC SR04 Breadboard Servo Motor MG995 Jumper Cable
- 8. ADVANTAGE ✓ Can see through the medium consisting of fog, snow, rain, darkness, clouds etc. ✓ Can penetrate and see through insulators. ✓ Can distinguish fixed as well as moving target types. ✓ Can help find out following parameters of object or target: - Range - Angular Position - Location of Target -Velocity of Target
- 9. DISADVANTAGE ✓ Can not distinguish and resolve multiple targets which are very close like our eye. ✓ Can not recognize color of the targets. ✓ Can not see targets which are in the water and are too deep. ✓ Can not see targets which are placed behind some conducting sheets. ✓ Also difficult to recognize short range target types.
- 10. REFERENCES ✓ https://www.arduino.cc/ ✓ https://en.wikipedia.org/wiki/Radar ✓ https://randomnerdtutorials.com/complete-guide-for-ultrasonic-sensor-hc- sr04/ ✓ https://www.jameco.com/jameco/workshop/howitworks/how-servo-motors- work.html
- 11. ANY QUESTION