The document contains several engineering drawings related to the installation of a new solar photovoltaic array and battery system at a site. It includes drawings showing plans for new conduit runs and fencing, as well as elevations of the site and details of the proposed photovoltaic array, battery options, and existing equipment.
This paper presents a step up DC-to-DC converter with hybrid switch capacitor technique having high voltage conversion ratio with small switch voltage stress . The converter is suitable for the applications where high voltage conversion is required. The proposed DC-DC converter has low voltage ratted MOSFET switch and is connected to PV array to get high output voltage at small duty ratios. Hence it has high efficiency. The principles of operations and the theoretical analysis are presented in this paper. All the simulations are done in MATLAB- SIMULINK Environment and results were obtained with voltage conversion ratio of 4.9.
Market Research Report : Solar Photovoltaic Market in China 2011Netscribes, Inc.
For the complete report, get in touch with us at : info@netscribes.com
The Solar Photovoltaic Market in China is growing at a fast pace which has made it the global leader in the manufacturing of solar cells and modules. This has been primarily driven by government policies and subsidies. A strong need to meet the ever increasing energy demand drives the solar PV market. The low cost of labour in China has made it lucrative for firms to venture into the sector. High demand from the export market for solar cells and modules also provides a boost to the market.
The report begins with an introduction to the renewable energy market in China with emphasis on its renewable energy capacity targets and the contribution of solar PV. It further delves into an overview of the photovoltaic technology, its major components and its various types. The market overview section gives an insight into the capacity and production levels of solar cells and modules with its production and value chain.
An analysis of drivers and challenges explains the factors leading to the growth of the market and include economic growth and demand for energy, geographical advantages and vast solar resources, huge export market, solar subsidies, strong investment potential and low carbon footprint. The key challenges identified are shortage of silicon supply and recycling limitations, high costs of electricity generation and technological issues.
The various initiatives take by the Chinese Government have been highlighted and include renewable energy law, feed-in-tariff, MOHURD subsidy (Solar Roofs program), the Golden Sun program, government support policies and rural electrification programme. Key trends in the market have also been analyzed which includes adaptation of new thin film technologies, new applications of solar PV technology and international participation.
The competition section provides an overview of the competitive landscape in this industry and includes a detailed profile of the major players in the market along with a snapshot of their business. Key developments in this sector have also been highlighted.
This paper evaluates the diversification opportunities for Indian corporates keen on entering the solar PV manufacturing sector. This includes both crystalline silicon and thin film technologies.
The white paper is divided into three sections. The first section examines the global market dynamics of the solar PV sector and the opportunities and challenges for this sector. This section also provides an introduction to the prominent technologies used in solar PV. Some of the key questions answered in this section include
• What are the global solar PV installation trends?
• Which is the largest solar market in the world?
• What are the various solar PV technologies available?
• What are the key differences between crystalline silicon and thin film technologies?
Arm cortex (lpc 2148) based motor speedUday Wankar
The project is designed to control the speed of a DC and AC motor using an
ARM7 LPC2148 processor. The speed of motor is directly proportional to the voltage
applied across its terminals. Hence, if voltage across motor terminal is varied, then
speed can also be varied. This project uses the above principle to control the speed of
the motor by varying the duty cycle of the pulses applied to it, popularly known as
PWM control. The project uses input button interfaced to the processor, which are
used to control the speed of motor. Pulse Width Modulation is generated at the output
by the microcontroller as per the program. The program is written in Embedded C.
The average voltage given or the average current flowing through the motor
will change depending on the duty cycle, ON and OFF time of the pulses, so the speed
of the motor will change. A motor driver IC is interfaced to the ARM7 LPC2148
processor board for receiving PWM signals and delivering desired output for speed
control. Further the project can be enhanced by using power electronic devices such
as IGBTs to achieve speed control higher capacity industrial motors.
Arm cortex ( lpc 2148 ) based motor speed control Uday Wankar
The project is designed to control the speed of a DC and AC motor using an ARM7 LPC2148 processor. The speed of motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied. This project uses the above principle to control the speed of the motor by varying the duty cycle of the pulses applied to it, popularly known as PWM control. The project uses input button interfaced to the processor, which are used to control the speed of motor. Pulse Width Modulation is generated at the output by the microcontroller as per the program. The program is written in Embedded C.
The average voltage given or the average current flowing through the motor will change depending on the duty cycle, ON and OFF time of the pulses, so the speed of the motor will change. A motor driver IC is interfaced to the ARM7 LPC2148 processor board for receiving PWM signals and delivering desired output for speed control. Further the project can be enhanced by using power electronic devices such as IGBTs to achieve speed control higher capacity industrial motors.
This paper presents a step up DC-to-DC converter with hybrid switch capacitor technique having high voltage conversion ratio with small switch voltage stress . The converter is suitable for the applications where high voltage conversion is required. The proposed DC-DC converter has low voltage ratted MOSFET switch and is connected to PV array to get high output voltage at small duty ratios. Hence it has high efficiency. The principles of operations and the theoretical analysis are presented in this paper. All the simulations are done in MATLAB- SIMULINK Environment and results were obtained with voltage conversion ratio of 4.9.
Market Research Report : Solar Photovoltaic Market in China 2011Netscribes, Inc.
For the complete report, get in touch with us at : info@netscribes.com
The Solar Photovoltaic Market in China is growing at a fast pace which has made it the global leader in the manufacturing of solar cells and modules. This has been primarily driven by government policies and subsidies. A strong need to meet the ever increasing energy demand drives the solar PV market. The low cost of labour in China has made it lucrative for firms to venture into the sector. High demand from the export market for solar cells and modules also provides a boost to the market.
The report begins with an introduction to the renewable energy market in China with emphasis on its renewable energy capacity targets and the contribution of solar PV. It further delves into an overview of the photovoltaic technology, its major components and its various types. The market overview section gives an insight into the capacity and production levels of solar cells and modules with its production and value chain.
An analysis of drivers and challenges explains the factors leading to the growth of the market and include economic growth and demand for energy, geographical advantages and vast solar resources, huge export market, solar subsidies, strong investment potential and low carbon footprint. The key challenges identified are shortage of silicon supply and recycling limitations, high costs of electricity generation and technological issues.
The various initiatives take by the Chinese Government have been highlighted and include renewable energy law, feed-in-tariff, MOHURD subsidy (Solar Roofs program), the Golden Sun program, government support policies and rural electrification programme. Key trends in the market have also been analyzed which includes adaptation of new thin film technologies, new applications of solar PV technology and international participation.
The competition section provides an overview of the competitive landscape in this industry and includes a detailed profile of the major players in the market along with a snapshot of their business. Key developments in this sector have also been highlighted.
This paper evaluates the diversification opportunities for Indian corporates keen on entering the solar PV manufacturing sector. This includes both crystalline silicon and thin film technologies.
The white paper is divided into three sections. The first section examines the global market dynamics of the solar PV sector and the opportunities and challenges for this sector. This section also provides an introduction to the prominent technologies used in solar PV. Some of the key questions answered in this section include
• What are the global solar PV installation trends?
• Which is the largest solar market in the world?
• What are the various solar PV technologies available?
• What are the key differences between crystalline silicon and thin film technologies?
Arm cortex (lpc 2148) based motor speedUday Wankar
The project is designed to control the speed of a DC and AC motor using an
ARM7 LPC2148 processor. The speed of motor is directly proportional to the voltage
applied across its terminals. Hence, if voltage across motor terminal is varied, then
speed can also be varied. This project uses the above principle to control the speed of
the motor by varying the duty cycle of the pulses applied to it, popularly known as
PWM control. The project uses input button interfaced to the processor, which are
used to control the speed of motor. Pulse Width Modulation is generated at the output
by the microcontroller as per the program. The program is written in Embedded C.
The average voltage given or the average current flowing through the motor
will change depending on the duty cycle, ON and OFF time of the pulses, so the speed
of the motor will change. A motor driver IC is interfaced to the ARM7 LPC2148
processor board for receiving PWM signals and delivering desired output for speed
control. Further the project can be enhanced by using power electronic devices such
as IGBTs to achieve speed control higher capacity industrial motors.
Arm cortex ( lpc 2148 ) based motor speed control Uday Wankar
The project is designed to control the speed of a DC and AC motor using an ARM7 LPC2148 processor. The speed of motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then speed can also be varied. This project uses the above principle to control the speed of the motor by varying the duty cycle of the pulses applied to it, popularly known as PWM control. The project uses input button interfaced to the processor, which are used to control the speed of motor. Pulse Width Modulation is generated at the output by the microcontroller as per the program. The program is written in Embedded C.
The average voltage given or the average current flowing through the motor will change depending on the duty cycle, ON and OFF time of the pulses, so the speed of the motor will change. A motor driver IC is interfaced to the ARM7 LPC2148 processor board for receiving PWM signals and delivering desired output for speed control. Further the project can be enhanced by using power electronic devices such as IGBTs to achieve speed control higher capacity industrial motors.
During my career I experienced many technologies that greatly assisted me. I mostly thank the United States NAVY for all their help and guide me with firm discipline and skills. Our Navy is the best in the world.
Original Mosfet IRF4905PBF IRF4905 IRF4905 4905 55V 74A TO-220 New Internatio...AUTHELECTRONIC
Original Mosfet IRF4905PBF IRF4905 IRF4905 4905 55V 74A TO-220 New International Rectifier
https://authelectronic.com/original-mosfet-irf4905pbf-irf4905-irf4905-4905-55v-74a-to-220-new-international-rectifier
Original Mosfet IRF4905PBF IRF4905 IRF4905 4905 55V 74A TO-220 New Internatio...
PV Array
1. FOREST SERVICE ROAD
SCALE 1/8" - 1'-0"
(E) FENCE
NEW WIND TURBINE AND TOWER
PER PLAN
NEW FENCE
NEW GENERATOR ENCLOSURE
PER STRUCTURAL DWG.
RELOCATED INSPECTION WELL
PER STRUCTURAL DWG.
(E) GENERATOR ENCLOSURE
(E) FENCE
(E) PROPANE TANKS
(E) TOWER
(E) GENERATOR TO BE REMOVED
NEW FENCE
1-1/4" PVC CONDUIT
3 - #4 & 1 - #6
(13) NEW PHOTO VOLTAIC ARRAY
(~52') (~32') (~12')
(~50')
(~50')
(~155')
(NOTE: LENGTHS ARE CONDUIT ONLY)
J-BOX
(TYP 4 PL)
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
(~115')
(~72')(~22')(~42')(~62')
(~115')
SITE CONDUIT PLAN
T1-01.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
CONDUIT PLAN
1-1/4" PVC SCH 40
1
2
3
4
1-1/4" SCH 40 PVC
ARRAY ID
1" PVC SCH 40
(5-PL)
1" PVC SCH 40
(8-PL)
GUTTER
N-7 N-6 N-5 N-4 N-3
S-6 S-5 S-4 S-3
N-2
S-2
N-1
S-1
ACCESS ROAD PER PLAN
(~52') (~32') (~12')(~72')(~22')(~42')
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
2. (E) FENCE
NEW WIND TURBINE AND TOWER
PER PLAN
NEW FENCE
NEW GENERATOR ENCLOSURE
PER STRUCTURAL DWG.
RELOCATED INSPECTION WELL
PER STRUCTURAL DWG.
(E) GENERATOR ENCLOSURE
(E) FENCE
(E) PROPANE TANKS
(E) TOWER
(E)GENERATOR TO BE REMOVED
NEW FENCE
(13) NEW PHOTO VOLTAIC ARRAY
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
GROUNDING CONDUCTOR TO BE #2 SBTC
FOLLOW VZW GROUNDING STANDARDS
FIELD NOTE: PROVIDE 3 ea. PIG TAILS FOR GENERATOR AND ATS
LEGEND
GROUND ROD
EXOTHERMIC WELD
LIGHTNING ROD
TAIL TO BE COILED ABOVE GRADE SCALE 1/8" - 1'-0"
GROUNDING PLAN
T1-02.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
GROUNDING PLAN
TO (E) GROUND RING
ACCESS ROAD PER PLAN
ARRAY ID
N-7 N-6 N-5 N-4 N-3
S-6 S-5 S-4 S-3
N-2
S-2
N-1
S-1
1
1
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
3. (E) FENCE
NEW WIND TURBINE AND TOWER
PER PLAN
NEW FENCE
NEW GENERATOR ENCLOSURE
PER STRUCTURAL DWG.
RELOCATED INSPECTION WELL
PER STRUCTURAL DWG.
(E) GENERATOR ENCLOSURE
(E) FENCE
(E) PROPANE TANKS
(E) TOWER
(E)GENERATOR TO BE REMOVED
NEW FENCE
(13) NEW PHOTO VOLTAIC ARRAY
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
FENCE TO BE 7' - 9 GA CHAIN LINK COMMERCIAL GRADE
3 STRAND BARBED WIRE, PAINTED BLACK
DIMENSIONS ARE REFERENCE ONLY
SCALE 1/8" - 1'-0"
FENCING PLAN
T1-03.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
FENCING PLAN
ACCESS ROAD PER PLAN
162'
40'
48'
ARRAY ID
N-7 N-6 N-5 N-4 N-3
S-6 S-5 S-4 S-3
N-2
S-2
N-1
S-1
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
4. NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
ALL DIMENSIONS MUST BE FIELD VERIFIED
BATTERY OPTIONS
EXISTING EQUIPMENT
T1-04.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
SCALE 1" - 1'-0"
EXISTING EQUIPMENT
(E) BATTERIES
(E) EQUIPMENT
(E) GENERATOR
(E) POWER PLANT
(E) INVERTER PANEL
(E) ATS / ILC
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
5. NEW POWER PLANT
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
ALL DIMENSIONS MUST BE FIELD VERIFIED
BATTERY OPTIONS
DEKA UNIGY II AVR 125-33
OPTION #2
T1-04.02
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
BATTERIES
EXISTING EQUIPMENT
WALL (DEMO)
C D F
(FUTURE)
A B E
(FUTURE)
2'-11
2"
NEW DC FANS
LOCATION TBD
SCALE 1" - 1'-0"
BATTERY PLAN / CONFIGURATION #2
DEKA UNIGY II AVR 125-33 / 1360 AMPERE HOUR
DISCHARGE TO 1.85 VPC
4 STRINGS ( 261.0 kW Hour)
6 STRINGS ( 391.6 kW Hour)
(RELOCATE) INVERTER PANEL
(RELOCATE) ATS / ILC
(N) NEMA 3 LOAD CENTER
AIR INTAKE
LOCATION TBD
HOOD
NEW CABLE LADDER
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
6. NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
ALL DIMENSIONS MUST BE FIELD VERIFIED
BATTERY OPTIONS
GNB 100-G-99
OPTION #1
T1-04.03
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
(N) POWER PLANT
(E) EQUIPMENT
BATTERIES
SCALE 1" - 1'-0"
BATTERY PLAN / CONFIGURATION #1
A B
C
(FUTURE)
(N) DC FANS
LOCATION TBD
GNB 100G99 / 3480 AMPERE HOUR
DISCHARGE TO 1.84 VPC
2 STRINGS ( 334.0 kW Hour)
3 STRINGS ( 501.1 kW Hour)
(RELOCATE) INVERTER PANEL
(RELOCATE) ATS / ILC
(N) NEMA 3 LOAD CENTER
AIR INTAKE
LOCATION TBD
HOOD
(N) CABLE LADDER
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
7. 4410
4415
4420
4425
4430
4435
4440
NEW WIND TURBINE AND TOWER
PER PLAN
FOREST SERVICE ROAD GRADE
(13) NEW PHOTO VOLTAIC ARRAY
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
SCALE 3/32" - 1'-0"
NORTH ELEVATION
T2-01.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
NORTH ELEVATION
(E) PROPANE TANK ENCLOSURE
ELEVATION CONTOURS AT 5'
ELEVATION (FT)
NEW FENCE
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
8. 4410
4415
4420
4425
4430
4435
4440
NEW WIND TURBINE AND TOWER
PER PLAN
FOREST SERVICE ROAD GRADE
(13) NEW PHOTO VOLTAIC ARRAY
NOTE: THIS DRAWING IS A GRAPHICAL REPRESENTATION
NOT A SURVEY
SCALE 3/32" - 1'-0"
WEST ELEVATION
T2-02.00
NTS
JH
DM
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
NORTH ELEVATION
PROPANE ENCLOSURE
TOWER FOOTING BEYOND
ELEVATION (FT)
NEW FENCE
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
9. SIDE ELEVATION
3-POSITION MANUAL ADJUSTMENT
PIER FOOTING SHOWN
FRONT ELEVATION REAR ELEVATION
MANUFACTURED
PV ARRAY
SUPPORT FRAME
UNI-RAC OR EQUIVALENT
PANEL ASSY ONLY ~ # 600
(REF)
10' SNOW LEVEL
(REF)
-A- -A-
SECTION -A-
PHOTO VOLTAIC ARRAY
STRAIGHT ARM MOUNTING
T5-01.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
SIDE ELEVATION
3-POSITION MECHANICAL ADJUSTMENT
SPREAD FOOTING SHOWN
FOUNDATION DETAIL
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615
10. 30 kW
45.8 FLA G
30 kW
45.8 FLA
3 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH 40
PVC CONDUIT
WIND TURBINE
BWC EXCEL -R
XX kW
XX FLA
WT
TURBINE TOWER
G
CELL SITE BUILDING
ATS-01
240/120V
(AUTO TRANSFER
SWITCH)
PANEL BOARD
Note 1
XX KVA
Pri: 3 PH / VAC
Sec: 48 VDC
XX k AIC
RECTIFIER
CONTROLLER
(E) EXCEL TECH
1100 W
INVERTER
(5 EA)
RECTIFIERS
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
DC POWER
PANEL
-48 VDC
DC POWER
PANEL
INVERTED POWER
PANEL
CONTROLLER
BATTERIES
-48 VDC
CONTROLLER
PHOTOVOLTAIC ARRAY
SUN POWER E20 -327
OUTDOOR GENERATOR
OUTDOOR GENERATOR
3 - 3/0 AWG
+1- #2 AWG GND
2" SCH 40
PVC CONDUIT
DC / DC
CONVERTER 24 VDC
DC POWER
PANEL
THIRD PARTY
CONTROLLER
(TYP 13 PL)
3 - 3/0 AWG
+1- #2 AWG GND
2" SCH 40
PVC CONDUIT
8 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH40
PVC CONDUIT
2 - #6 AWG
+1- #10 AWG GND
1" SCH 40
PVC CONDUIT
6 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH40
PVC CONDUIT
(3 EA)
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
J-BOX
2 - 12 AWG
+1- 12 AWG GND
(12 PL)
MICROWAVE
DC FANS
GEN LIGHTING
FUTURE
FUTURE
FUTURE
RADIO
RADIO
FUTURE
INVERTER
2 - 10 AWG
(5 PL)
BLOCK HEATER
OIL HEATER
TIMER
LIGHTS GEN RM
BLOCK HEATER
LIGHTS EQ RM
HVAC
HVAC
FUTURE
FUTURE
FUTURE
FUTURE
30 kW
45.8 FLA G
30 kW
45.8 FLA
3 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH 40
PVC CONDUIT
WIND TURBINE
BWC EXCEL -R
XX kW
XX FLA
WT
TURBINE TOWER
G
CELL SITE BUILDING
ATS-01
240/120V
(AUTO TRANSFER
SWITCH)
PANEL BOARD
Note 1
XX KVA
Pri: 3 PH / VAC
Sec: 48 VDC
XX k AIC
RECTIFIER
CONTROLLER
INVERTER
RECTIFIERS
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
DC POWER
PANEL
-48 VDC
DC POWER
PANEL
INVERTED POWER
PANEL
CONTROLLER
BATTERIES
-48 VDC
CONTROLLER
PHOTOVOLTAIC ARRAY
SUN POWER E20 -327
OUTDOOR GENERATOR
OUTDOOR GENERATOR
3 - 3/0 AWG
+1- #2 AWG GND
2" SCH 40
PVC CONDUIT
DC / DC
CONVERTER 24 VDC
DC POWER
PANEL
THIRD PARTY
CONTROLLER
(TYP 13 PL)
3 - 3/0 AWG
+1- #2 AWG GND
2" SCH 40
PVC CONDUIT
8 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH40
PVC CONDUIT
2 - #6 AWG
+1- #10 AWG GND
1" SCH 40
PVC CONDUIT
6 - #6 AWG
+1- #10 AWG GND
1-1/4" SCH40
PVC CONDUIT
(3 EA)
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
RECTIFIER
J-BOX
2 - 12 AWG
+1- 12 AWG GND
(12 PL)
MICROWAVE
DC FANS
GEN LIGHTING
FUTURE
FUTURE
FUTURE
RADIO
RADIO
FUTURE
BLOCK HEATER
OIL HEATER
TIMER
LIGHTS GEN RM
BLOCK HEATER
LIGHTS EQ RM
HVAC
HVAC
FUTURE
FUTURE
FUTURE
FUTURE
FUTURE
ONE LINE
NEW - WITH EXISTING EXCEL TECH INVERTERS
PRELIMINARY
ONE - LINE
T6-01.00
NTS
WILDERNESSsharePorterEnterprisesPdf.SampleSolarPVArrayB.DWG
ONE LINE / ALTERNATE - EMERSON / GE
NEW -48 VDC INVERTERS
A
B
C
D
E
F
G Proprietary and Confidential
Company Name:
Date: Title:
Project Name:
Drawn:
Checked:
Engineer:
Project Mgr:
Approved:
Approved:
Serial Number: Dwg Number:
Scale:Project Location:
DO NOT SCALE DRAWING
Size:
D
Rev:
P ESystems Engineering Consultants
13323-226th Ave NE
Granite Falls, WA 98252
Phone (360) 691-1600
Fax (360) 691-1615