SKHPP-1005-Geologic Section of Dam Site(Rev1)-Layout1
•
0 likes•60 views
This document presents a geologic section of a diversion structure for the 840 MW Suki Kinari Hydropower Project. The section shows elevations and projected distances of four boreholes, labeled BH-1 through BH-4, along with elevations of three feasibility-stage boreholes. Various geologic units are displayed, including quartz mica schist, quartzite, dolerite, terrace deposits, and colluvial deposits. Legend information and notes provide further details on geologic units, borehole locations, and seismic line positions.
Report
Share
Report
Share
Download to read offline
Recommended
Mukusi Guesthouse
The document contains a drawing list for a proposed 18 room lodge project in Kazangula for client Adam Young. It includes 7 drawings - a site plan, main building plan and section, main building elevations, double units plans/section/elevations, location plan showing the site in relation to nearby towns, and a main building fire plan. The drawings are at various scales from 1:7500 to 1:200 and formatted on A1, A3, and L size paper.
ajju final project
This document outlines the planning and design of a bypass for Guna Town in India. It includes objectives to reduce travel time and provide a safe, efficient transportation system. Various alignment options for the bypass are analyzed using GIS software. Traffic and pavement design data are collected, such as traffic volume, speed surveys, and soil testing. A four-lane divided carriageway with shoulders is designed. The design includes horizontal curves, cross-sections, drainage, signs, and other traffic and safety features. Construction of the bypass will improve traffic flow, safety, and transportation in and around Guna Town.
Masters s
This document is a drawing list for a site plan of a building project. It contains 53 drawings related to the project, including architectural plans, structural plans, mechanical plans, and more. Each drawing is listed, with its number, name, latest amendment number and date, and those who drew, checked and approved it. The list also notes the total number of drawings as 53.
P15921-1(22) ground Floor Plan Proposed
This drawing shows the proposed ground floor plan for a development located at 292-298 High Street in Slough. The drawing is copyright protected and all dimensions should be verified on site. Any discrepancies should be reported to the design firm, GauntFrancis. The drawing depicts design intent only.
AIRPLANEDRAWING220.PDF
This document provides characteristics data for an aircraft model 220, including dimensions for its wing, horizontal tail, and vertical tail components. It lists the wing as having an area of 2211.82 square feet, an aspect ratio of 7, and a sweep angle of 30 degrees. The aircraft has a capacity of 220 passengers, with 4 first class seats and 200 economy seats. Cargo can be stored in 8 containers in the front and aft areas. Engineering drawings with dimensions are also included.
PV Array
The document contains several engineering drawings related to the installation of a new solar photovoltaic array and battery system at a site. It includes drawings showing plans for new conduit runs and fencing, as well as elevations of the site and details of the proposed photovoltaic array, battery options, and existing equipment.
Study project - Traffic engineering 2019
Signal Setting Design and Synchronization in Via Tuscolana (Italy, Rome):
- Macro and Micro-simulation for transport arteria (Current situation and project) in PTV Visum and PTV Vissim
- Drawing Traffic Organization schemes
- Calculation of Traffic lights for each intersections
Mahoning Valley Connector Spillway Bridge (11-05-10)
The document summarizes the design specifications for a 248 foot long pedestrian bridge over Deer Creek Reservoir in Stark County, Ohio. The bridge features a curved bow string arch truss design with 18 panels and a 7 inch concrete deck. Design considerations included live loads from pedestrians and vehicles, wind loads, and expansion joints. Structural analysis was performed using hand calculations, TRAP software, and Excel spreadsheets. Fabrication details such as deflection requirements, plate processing, assembly, and delivery are also outlined.
Recommended
Mukusi Guesthouse
The document contains a drawing list for a proposed 18 room lodge project in Kazangula for client Adam Young. It includes 7 drawings - a site plan, main building plan and section, main building elevations, double units plans/section/elevations, location plan showing the site in relation to nearby towns, and a main building fire plan. The drawings are at various scales from 1:7500 to 1:200 and formatted on A1, A3, and L size paper.
ajju final project
This document outlines the planning and design of a bypass for Guna Town in India. It includes objectives to reduce travel time and provide a safe, efficient transportation system. Various alignment options for the bypass are analyzed using GIS software. Traffic and pavement design data are collected, such as traffic volume, speed surveys, and soil testing. A four-lane divided carriageway with shoulders is designed. The design includes horizontal curves, cross-sections, drainage, signs, and other traffic and safety features. Construction of the bypass will improve traffic flow, safety, and transportation in and around Guna Town.
Masters s
This document is a drawing list for a site plan of a building project. It contains 53 drawings related to the project, including architectural plans, structural plans, mechanical plans, and more. Each drawing is listed, with its number, name, latest amendment number and date, and those who drew, checked and approved it. The list also notes the total number of drawings as 53.
P15921-1(22) ground Floor Plan Proposed
This drawing shows the proposed ground floor plan for a development located at 292-298 High Street in Slough. The drawing is copyright protected and all dimensions should be verified on site. Any discrepancies should be reported to the design firm, GauntFrancis. The drawing depicts design intent only.
AIRPLANEDRAWING220.PDF
This document provides characteristics data for an aircraft model 220, including dimensions for its wing, horizontal tail, and vertical tail components. It lists the wing as having an area of 2211.82 square feet, an aspect ratio of 7, and a sweep angle of 30 degrees. The aircraft has a capacity of 220 passengers, with 4 first class seats and 200 economy seats. Cargo can be stored in 8 containers in the front and aft areas. Engineering drawings with dimensions are also included.
PV Array
The document contains several engineering drawings related to the installation of a new solar photovoltaic array and battery system at a site. It includes drawings showing plans for new conduit runs and fencing, as well as elevations of the site and details of the proposed photovoltaic array, battery options, and existing equipment.
Study project - Traffic engineering 2019
Signal Setting Design and Synchronization in Via Tuscolana (Italy, Rome):
- Macro and Micro-simulation for transport arteria (Current situation and project) in PTV Visum and PTV Vissim
- Drawing Traffic Organization schemes
- Calculation of Traffic lights for each intersections
Mahoning Valley Connector Spillway Bridge (11-05-10)
The document summarizes the design specifications for a 248 foot long pedestrian bridge over Deer Creek Reservoir in Stark County, Ohio. The bridge features a curved bow string arch truss design with 18 panels and a 7 inch concrete deck. Design considerations included live loads from pedestrians and vehicles, wind loads, and expansion joints. Structural analysis was performed using hand calculations, TRAP software, and Excel spreadsheets. Fabrication details such as deflection requirements, plate processing, assembly, and delivery are also outlined.
Sample of Structural Steel Scheduling
This document outlines the fabrication, delivery, erection, and inspection schedule for sections 1-11 of the Spire Tower project with cladding at the 47m level. Key details include:
- Sections 1-11 will be fabricated between March 22-27 and delivered to the site between April 15-24.
- Erection of each section will start 1-4 days after delivery and be completed through welding and inspection between April 16-May 8.
- The schedule provides specific dates for each stage of each section's completion to coordinate the multi-stage construction process.
25 years of geotechnical engineering
This document summarizes 25 years of experience in geotechnical engineering projects including slope engineering, hydrogeological remediation works, deep foundations, infrastructure projects, construction supervision, emergency management, and risk assessment. Specific projects mentioned include the Turin 2006 Winter Olympics, remediation of an asbestos mine tailings dump which won a European award, and large alpine landslide analysis and stabilization works. Monitoring, numerical modeling, and environmentally-friendly construction and remediation techniques are also discussed.
Drawing And Report
Engineering survey and alignment
Drawing And Report
KEY MAP
INDEX MAP
PRELIMINARY SURVEY PLANS
DETAILED PLAN
BlackKatelynn_Portfolio
This document appears to be a portfolio or resume for an architect named Katelynn Blackbas. It includes a list of past projects in various categories including residential townhouses, healthcare interior design, art installations, and graduate thesis projects. For each project, there is a brief description of the scope of work, timeline, and software used. The portfolio is meant to showcase the architect's experience and capabilities.
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
COTA is conducting preliminary design, engineering and environmental clearance for the Cleveland Avenue Bus Rapid Transit (BRT) Project. The proposed service will transport riders between downtown Columbus and Polaris Parkway/Africa Road, connect with existing bus routes, and include new stations. COTA is creating a unique identity for the proposed BRT/Enhanced Bus Service for Cleveland Avenue.
Sea to Ski Higway Improvements Project
Presented by Grant Lachmuth of Urban Systems at the Oct 17th Canadian Design Build Conference in Saskatoon.
Hwc used vehicles august 2017 21.08
A range of used vehicles for sale from Highway Care. Please contact us on 01622 734215 to make an offer.
Amiina bakunowicz:GC Pedestrian Bridge
The document summarizes the generative components used to model a bridge and staircase connecting three platforms in a valley in Kazakhstan. Key elements include:
1. Promoting existing lines from a topography model to define the bridge and staircase centerlines.
2. Creating B-spline curves along the contour lines to define the staircase and connecting points to define the bridge.
3. Dividing the staircase curves into steps, connecting points to create railings, and extruding the railings to generate the final modeled structure.
The process demonstrates how generative components can be used to parametrically define and construct a complex modeled structure based on geometric relationships extracted from an existing site topography model.
GISImplementationInDesignWorkflows
This document discusses the major stages of infrastructure system design that can be supported by a GIS application, including terrain modeling, setting up the network layout, simulations and design validation, and detailed design. It provides examples of using GIS for terrain modeling with triangulated irregular networks, setting water and sewage networks on digital terrain models, running hydraulic simulations, and generating detailed designs and construction plans.
Cl1
This document appears to be a performance test record for an air handling unit or similar HVAC equipment. It includes sections for design parameters, test performance data, fan data, drive data, motor data, and a commissioning checklist. The document also notes that the unit was located at IIT Hyderabad for their campus development project but was not approved.
Synopsis Presentation GIS
This document outlines a study on developing a probabilistic model for dam site selection using GIS techniques. It will identify suitable dam sites in the study area by analyzing various parameters like catchment area, flow accumulation, land use, and eliminating areas with hazards. The methodology involves collecting spatial data on terrain, land cover, faults etc. and analyzing them on GIS to shortlist potential locations based on storage capacity and distance from settlements/faults. The expected outcomes are maps and analyses identifying the best dam site locations protected from natural hazards and with optimal storage capacity.
study of dams
The document outlines objectives and criteria for selecting a suitable site for dam construction and catchment area in Lavale, Pune, Maharashtra. The objectives are to study software like Q-GIS and ENVI, find an area fulfilling requirements of soil, rainfall, slope, and generate land use classification from satellite images. Key criteria for the site include gentle slopes, adequate rainfall, permeable soils, away from settlements, and favorable watershed/stream flow. Various maps are analyzed to identify areas meeting these criteria and suitability is rated to determine the optimal location.
Site Suitability For Construction(Dam)
It is a presentation made on the actual work done on site for the selection of construction site for the dam,it can be used as well for other site suitability.
Engineering geology of dam
This document discusses the importance of engineering geology in dam construction. There are three main types of dams - arc or buttress dams, gravity dams, and embankment dams - which experience different forces. Proper geological investigations are required to ensure the stability and safety of the dam foundation, the water-tightness of the reservoir, and slope stability. Preliminary geological investigations include topographical studies, reservoir location analysis, petrology studies, structural geology studies, and examining foundation conditions. Detailed investigations involve making a detailed geological map, studying rock types, structures, seismic data, and interpreting core drill samples to understand the engineering geological properties of the area.
Dam construction
This document discusses dam construction, including the types of dams, factors considered in site investigations, construction processes, and key elements. It describes the main types of dams as earth, rock, concrete, and their subclasses. Investigation factors include geology, hydrology, materials availability, and environmental impacts. Construction involves river diversion, placement of impervious cores and drainage layers, grouting, and addition of spillways and monitoring systems. Concrete dams are built using solid gravity, arch, buttress, or prestressed concrete designs suited to site conditions.
Dams, Types of dams
DAMS
Types of dams
Selection of dam sites
Geological characters for investigation
Selection of the dam type
Gravity dams
butress dams
embankment dams
arch dams
cupola dams
composite dams
Bhakra Dam
Mir Alam multi-arch dam
Idukki Dam
Tehri Dam
Ujani Dam or bhima dam
DAMS AND IT'S TYPES . . .
Dams are solid barriers constructed across rivers to store flowing water for uses like hydropower, irrigation, water supply, flood control, and navigation. The main types of dams are gravity dams, buttress dams, arch dams, and earth dams. Gravity dams are massive concrete structures where the weight forces are transmitted straight down. Buttress dams are reinforced gravity dams with structural supports. Arch dams are curved upstream to transmit water forces to the valley walls. Earth dams are broad, trapezoidal structures built of compacted earth and rock when foundations cannot support heavier dam types.
Sc 0009-rwpc-pip-civ-cal-0511 0-a
This document provides structural calculations for anchor blocks of a river water pipeline. It includes calculations for self-weight, hydrostatic forces, block stability, soil stresses, slip resistance, overturning, and concrete and reinforcement design of 9 different anchor block types based on variables like fluid pressure, pipe curve direction and angle. Dimensions, materials, loads, references and modeling assumptions are defined. Detailed calculations are shown for forces, stability, dimensioning, and reinforcement design of a sample Type I anchor block.
CE Confr Presentation 08 Oct 2022.pptx
This document provides an introduction and progress update for runway works being conducted at Air Force Station Bagdogra. Some key details include:
- The project started in January 2019 with a target completion date of January 2023 after extensions. Physical progress is currently at 80% as of October 2022.
- The scope of work involves construction and improvements to the main runway, parallel taxi track, links, dispersal areas, drains, and other infrastructure.
- Monthly targets are outlined to complete the remaining work by the January 2023 deadline, focusing on tasks like paving, drainage installation, and finishing works.
- Challenges mentioned are non-availability of aggregates, inadequate drainage work, and needing
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
This document contains a parts list for a crankcase assembly. It includes 230 parts ranging from gaskets and plugs to larger components like the crankshaft and cylinder head. Each part is listed with its part number, name in Polish and English, quantity used, and weight. Tolerances or size variations are specified for some parts like bearing shells.
More Related Content
What's hot
Sample of Structural Steel Scheduling
This document outlines the fabrication, delivery, erection, and inspection schedule for sections 1-11 of the Spire Tower project with cladding at the 47m level. Key details include:
- Sections 1-11 will be fabricated between March 22-27 and delivered to the site between April 15-24.
- Erection of each section will start 1-4 days after delivery and be completed through welding and inspection between April 16-May 8.
- The schedule provides specific dates for each stage of each section's completion to coordinate the multi-stage construction process.
25 years of geotechnical engineering
This document summarizes 25 years of experience in geotechnical engineering projects including slope engineering, hydrogeological remediation works, deep foundations, infrastructure projects, construction supervision, emergency management, and risk assessment. Specific projects mentioned include the Turin 2006 Winter Olympics, remediation of an asbestos mine tailings dump which won a European award, and large alpine landslide analysis and stabilization works. Monitoring, numerical modeling, and environmentally-friendly construction and remediation techniques are also discussed.
Drawing And Report
Engineering survey and alignment
Drawing And Report
KEY MAP
INDEX MAP
PRELIMINARY SURVEY PLANS
DETAILED PLAN
BlackKatelynn_Portfolio
This document appears to be a portfolio or resume for an architect named Katelynn Blackbas. It includes a list of past projects in various categories including residential townhouses, healthcare interior design, art installations, and graduate thesis projects. For each project, there is a brief description of the scope of work, timeline, and software used. The portfolio is meant to showcase the architect's experience and capabilities.
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
COTA is conducting preliminary design, engineering and environmental clearance for the Cleveland Avenue Bus Rapid Transit (BRT) Project. The proposed service will transport riders between downtown Columbus and Polaris Parkway/Africa Road, connect with existing bus routes, and include new stations. COTA is creating a unique identity for the proposed BRT/Enhanced Bus Service for Cleveland Avenue.
Sea to Ski Higway Improvements Project
Presented by Grant Lachmuth of Urban Systems at the Oct 17th Canadian Design Build Conference in Saskatoon.
Hwc used vehicles august 2017 21.08
A range of used vehicles for sale from Highway Care. Please contact us on 01622 734215 to make an offer.
Amiina bakunowicz:GC Pedestrian Bridge
The document summarizes the generative components used to model a bridge and staircase connecting three platforms in a valley in Kazakhstan. Key elements include:
1. Promoting existing lines from a topography model to define the bridge and staircase centerlines.
2. Creating B-spline curves along the contour lines to define the staircase and connecting points to define the bridge.
3. Dividing the staircase curves into steps, connecting points to create railings, and extruding the railings to generate the final modeled structure.
The process demonstrates how generative components can be used to parametrically define and construct a complex modeled structure based on geometric relationships extracted from an existing site topography model.
GISImplementationInDesignWorkflows
This document discusses the major stages of infrastructure system design that can be supported by a GIS application, including terrain modeling, setting up the network layout, simulations and design validation, and detailed design. It provides examples of using GIS for terrain modeling with triangulated irregular networks, setting water and sewage networks on digital terrain models, running hydraulic simulations, and generating detailed designs and construction plans.
Cl1
This document appears to be a performance test record for an air handling unit or similar HVAC equipment. It includes sections for design parameters, test performance data, fan data, drive data, motor data, and a commissioning checklist. The document also notes that the unit was located at IIT Hyderabad for their campus development project but was not approved.
What's hot (10)
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
CMAX Cleveland Avenue BRT Public Meeting - October 14, 2014
Viewers also liked
Synopsis Presentation GIS
This document outlines a study on developing a probabilistic model for dam site selection using GIS techniques. It will identify suitable dam sites in the study area by analyzing various parameters like catchment area, flow accumulation, land use, and eliminating areas with hazards. The methodology involves collecting spatial data on terrain, land cover, faults etc. and analyzing them on GIS to shortlist potential locations based on storage capacity and distance from settlements/faults. The expected outcomes are maps and analyses identifying the best dam site locations protected from natural hazards and with optimal storage capacity.
study of dams
The document outlines objectives and criteria for selecting a suitable site for dam construction and catchment area in Lavale, Pune, Maharashtra. The objectives are to study software like Q-GIS and ENVI, find an area fulfilling requirements of soil, rainfall, slope, and generate land use classification from satellite images. Key criteria for the site include gentle slopes, adequate rainfall, permeable soils, away from settlements, and favorable watershed/stream flow. Various maps are analyzed to identify areas meeting these criteria and suitability is rated to determine the optimal location.
Site Suitability For Construction(Dam)
It is a presentation made on the actual work done on site for the selection of construction site for the dam,it can be used as well for other site suitability.
Engineering geology of dam
This document discusses the importance of engineering geology in dam construction. There are three main types of dams - arc or buttress dams, gravity dams, and embankment dams - which experience different forces. Proper geological investigations are required to ensure the stability and safety of the dam foundation, the water-tightness of the reservoir, and slope stability. Preliminary geological investigations include topographical studies, reservoir location analysis, petrology studies, structural geology studies, and examining foundation conditions. Detailed investigations involve making a detailed geological map, studying rock types, structures, seismic data, and interpreting core drill samples to understand the engineering geological properties of the area.
Dam construction
This document discusses dam construction, including the types of dams, factors considered in site investigations, construction processes, and key elements. It describes the main types of dams as earth, rock, concrete, and their subclasses. Investigation factors include geology, hydrology, materials availability, and environmental impacts. Construction involves river diversion, placement of impervious cores and drainage layers, grouting, and addition of spillways and monitoring systems. Concrete dams are built using solid gravity, arch, buttress, or prestressed concrete designs suited to site conditions.
Dams, Types of dams
DAMS
Types of dams
Selection of dam sites
Geological characters for investigation
Selection of the dam type
Gravity dams
butress dams
embankment dams
arch dams
cupola dams
composite dams
Bhakra Dam
Mir Alam multi-arch dam
Idukki Dam
Tehri Dam
Ujani Dam or bhima dam
DAMS AND IT'S TYPES . . .
Dams are solid barriers constructed across rivers to store flowing water for uses like hydropower, irrigation, water supply, flood control, and navigation. The main types of dams are gravity dams, buttress dams, arch dams, and earth dams. Gravity dams are massive concrete structures where the weight forces are transmitted straight down. Buttress dams are reinforced gravity dams with structural supports. Arch dams are curved upstream to transmit water forces to the valley walls. Earth dams are broad, trapezoidal structures built of compacted earth and rock when foundations cannot support heavier dam types.
Viewers also liked (9)
Similar to SKHPP-1005-Geologic Section of Dam Site(Rev1)-Layout1
Sc 0009-rwpc-pip-civ-cal-0511 0-a
This document provides structural calculations for anchor blocks of a river water pipeline. It includes calculations for self-weight, hydrostatic forces, block stability, soil stresses, slip resistance, overturning, and concrete and reinforcement design of 9 different anchor block types based on variables like fluid pressure, pipe curve direction and angle. Dimensions, materials, loads, references and modeling assumptions are defined. Detailed calculations are shown for forces, stability, dimensioning, and reinforcement design of a sample Type I anchor block.
CE Confr Presentation 08 Oct 2022.pptx
This document provides an introduction and progress update for runway works being conducted at Air Force Station Bagdogra. Some key details include:
- The project started in January 2019 with a target completion date of January 2023 after extensions. Physical progress is currently at 80% as of October 2022.
- The scope of work involves construction and improvements to the main runway, parallel taxi track, links, dispersal areas, drains, and other infrastructure.
- Monthly targets are outlined to complete the remaining work by the January 2023 deadline, focusing on tasks like paving, drainage installation, and finishing works.
- Challenges mentioned are non-availability of aggregates, inadequate drainage work, and needing
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
This document contains a parts list for a crankcase assembly. It includes 230 parts ranging from gaskets and plugs to larger components like the crankshaft and cylinder head. Each part is listed with its part number, name in Polish and English, quantity used, and weight. Tolerances or size variations are specified for some parts like bearing shells.
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
This document contains a parts list for a crankcase assembly. It includes 230 parts ranging from gaskets and plugs to larger components like the crankshaft and cylinder head. Each part is listed with its part number, name in Polish and English, quantity used, and weight. Tolerances or size variations are specified for some parts like bearing shells.
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
This document contains a parts list for a crankcase assembly. It includes 230 parts ranging from gaskets and plugs to larger components like the crankshaft and cylinder head. Each part is listed with its part number, name in Polish and English, quantity used, and weight. Tolerances or size variations are specified for some parts like bearing shells.
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
This document contains a parts list for a crankcase assembly. It includes 230 parts ranging from gaskets and plugs to larger components like the crankshaft and cylinder head. Each part is listed with its part number, name in Polish and English, quantity used, and weight. Tolerances or size variations are specified for some parts like bearing shells.
Capitulo 02 grupo 01
The document discusses the geometric design of roads, including determining design elements like the road category, design speed, maximum grades, horizontal curves, and vertical curves. It also includes plans showing the curve of levels and design of horizontal curves for specific roads within the project. Calculations are shown for the longitudinal profile and mass diagram of some streets.
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
The document provides a parts list for a cylinder head, including the part numbers, names, quantities, and other details of 140 individual parts. It lists the cylinder head assembly part numbers for different serial number ranges, as well as bolts, plugs, gaskets, guides, and other common cylinder head components. Serial numbers are referenced for some parts to indicate when part numbers were updated.
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
The document provides a parts list for a cylinder head, including the part numbers, names, quantities, and other details of 140 individual parts. It lists the cylinder head assembly part numbers for different serial number ranges, as well as bolts, plugs, gaskets, guides, and other common cylinder head components. The parts cover a range of models, with notes on changes to part numbers for different date codes and serial number thresholds.
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
The document provides a parts list for a cylinder head, including the part numbers, names, quantities, and other details of 140 individual parts. It lists the cylinder head assembly part numbers for different serial number ranges, as well as bolts, plugs, gaskets, guides, and other common cylinder head components. The parts cover a range of models, with notes on changes to part numbers for different date codes and serial number thresholds.
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
The document provides a parts list for a cylinder head, including the part numbers, names, quantities, and other details of 140 individual parts. It lists the cylinder head assembly part numbers for different serial number ranges, as well as bolts, plugs, gaskets, guides, and other common cylinder head components. Serial numbers are referenced for some parts to indicate when part numbers were updated.
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
The document provides a parts list for a cylinder head, including the part numbers, names, quantities, and other details of 140 individual parts. It lists the cylinder head assembly part numbers for different serial number ranges, as well as bolts, plugs, gaskets, guides, and other common cylinder head components. Serial numbers are referenced for some parts to indicate when part numbers were updated.
Presentation on Flyover at Aziz Cross on GT Road Gujranwala
Presentation on Flyover at Aziz Cross on GT Road Gujranwala. First project in the history of Pakistan where flyovers are constructed on different heights
sn-ladakh.pdf
The document summarizes key details of two EPC contractors, M/s Siemens JV and M/s JK electric JV Hyosung, hired for substation projects in Padum GIS and Diskit GIS in Ladakh. It includes location of projects, issuance and acceptance of Notice of Award, review of L-2 schedules, approval of construction materials and vendors, submission and review status of design drawings, sanctioned versus awarded project costs, and current status of preparatory activities and document submissions by each contractor.
Final year Revit project
The document contains architectural plans and drawings for the Ice House Hotel project in Ballina, County Mayo, Ireland. It includes floor plans, elevations, and sections for the basement, lower ground, ground, and first floors of the existing building as well as schedules for doors, windows, and areas. Dimensions and technical details are provided for the building elements. The drawings are at scales between 1:100 and 1:1000 and were created by Mark Thornton for his BIM module as part of an architectural technology degree.
Estimation of bridges and automations copy
Estmation of Bridge is always a challenge.Let read this automation Technique to meet and check the all design criteria
ICGCM_33_Lu_MassiveSandstoneChannel
The document compares two hydraulic fracturing techniques used to mitigate the impact of a massive sandstone intrusion on two successive longwall panels. Flac3D models show increased shear stress relief in Panel 22 where frac holes were drilled higher and used more water. Longwall Visual Analysis monitoring of Panel 22 found lower pressure and cavity risk, correlating with frac locations. Panel 22 saw increased longwall advance rates and productivity and decreased rock delays compared to Panel 21. The improved hydraulic fracturing technique successfully mitigated the sandstone impact.
Presentation regarding the city development and hygienic environment.pptx
This presentation is about sewerage treatment plant and different techniques used in for follow up.
Similar to SKHPP-1005-Geologic Section of Dam Site(Rev1)-Layout1 (18)
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota KX41-2S KX41-2SV Excavator Parts Catalogue Manual (Publishing ID BKID...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Kubota U25-3 ALPHA (SN 20001-59999) Excavator Parts Catalogue Manual (Publish...
Presentation on Flyover at Aziz Cross on GT Road Gujranwala
Presentation on Flyover at Aziz Cross on GT Road Gujranwala
Presentation regarding the city development and hygienic environment.pptx
Presentation regarding the city development and hygienic environment.pptx
SKHPP-1005-Geologic Section of Dam Site(Rev1)-Layout1
- 1. 2230 2240 2250 2260 2270 2280 2290 2300 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 2220 2210 2200 2190 2150 DISTANCE IN METERS ELEVATIONINMETERS BH-4 BH-3 BH-2 BH-1 MARBLE D A2 B 2180 2170 2160 EL 2235.03 m EL 2235.914 m EL 2235.434 m 16m PROJECTED U/S 24m PROJECTED U/S River Road 20m PROJECTED D/S EL 2237.261 m EL 2250.96 m EL 2234.296 m SECTION AA' (LOOKING DOWNSTREAM) ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? 290 ?? ? SL-2 SL-3 INPROGRESS INPROGRESS INPROGRESS ? ? ? ? ? ? ? ? ? ? 840 MW Suki Kinari Hydropower Project Updating of Feasibility Study and Preparation of EPC Tender Documents Geologic Section of Diversion Structure LEGEND: COLLUVIAL DEPOSITS/SLIDED MASS:CD/SM QMS Qtz SURFACE WITH VEGETATION COVER.SC TERRACE DEPOSITS/CULTIVATED AREA:TD/CA QUARTZ MICA SCHIST: QUARTZITE: ? ? INTERPRETED GEOLOGIC CONTACT NOTE: 1. FOR LOCATION OF GEOLOGIC SECTION REFER FIG.2. 2. FOR DETAIL DESCRIPTION OF GEOLOGIC UNITE REFER FIG.1. 3. FOR FOLIATION SEE FIG.1 GEOLOGIC PLAN. 4. DEPTH OF RIVER ASSUMED. 5. FEASIBILITY STAGE BOREHOLE (A2, B, D) 6. CURRENT STAGE BOREHOLES INPROGRESS (BH#1, 2, 3 & 4) DOLERITE:DT SC TD/CA QMS DT Qtz Qtz CD/SM TD/CA SL-2, SL-3 LOCATION OF SEISMIC LINES 0 20 40 METERS5010 30FEASIBILITY STAGE BOREHOLE (A2, B, D) CURRENT STAGE BOREHOLES INPROGRESS (BH#1, 2, 3 & 4)