The document describes setting up a photo on an international paper page in a layout program. The photo was dragged from another tab and positioned slightly off-center to focus on the model. Small text was added below in the same font used previously, describing the model's clothing. The photo's coloring was adjusted by applying a light blue tone to make it appear brighter while adjusting the gloss and ambience to prevent it looking too blue.

1. For the begging I set the page to international
paper and then imported my photo into a
different tab. To get the picture onto the
international paper I held shift and then dragged
the picture to the other page before dropping
the picture.
Once the picture was dragged in it meant that I could then move the
image so it suited my page. I positioned the photo slightly more to
the right so the model wasn’t exactly in the middle. Also, I made
sure that there was less head space on the photo so the model was
the main focus.

2. As this photo isn’t for the main cover means
that I didn’t have to have a slogan for the
picture. I still had to apply the small text about
he clothing the model is wearing. I used the
same font which I used for the front cover. The
font I used is Iskoola Pota.

3. For the picture I used a
light blue as then it made
the image look brighter. I
changed the gloss and
the ambience so it didn’t
look too blue.