This document provides an overview of production and operations management (POM). It discusses the key components of POM which include product, plant, processes, programmes, and people. It also covers different types of production methods such as job, batch, flow, and group. Additionally, it introduces concepts like capacity management, break-even analysis, and quality management. The document is an introductory chapter that lays the foundation for further concepts in POM.
production and operations management(POM) Complete note kabul university
ย
The Introduction to POM, Scope, Role, and Objectives of POM, Operations Mgt. โ Concept; Functions
Product Design and its characteristics;
Product Development Process, Product Development Techniques.
Production Planning and Control
Objective of PPC
There are three stages in PPC
Classification/Functions of PPC
Benefits of PPC
Limitations of PPC
Production Planning / Operations Planning
Factors determining Production Planning Procedures
Production Planning System
Production Control
Factors Determining PC procedures
Main Functions of Production Planning
& Control Department
Plant Planning & Facility Planning
Supply Chain Management: Context, Collaboration and CompetitionRichard Farr
ย
Why are supply chains as they are? Who decides what jobs a company should do, and which ones should be left to others? These slides encourage the learner to think about the company operations in their supply chain context, with reference to established principles such as Porter's Five Forces, and Brandenburger and Nalebuff's work on coopetition. Suggested student activities are included, and the presentation can be downloaded.
Types of production system (production and operation management)Yamini Kahaliya
ย
this document contains Types of production system
(In our introduction to production and operations management ("POM") we suggested that there are several different methods of handling the conversion or production process - Job, Batch, Flow and Group. This revision note explains these methods in more detail.)
1. Job method
2. Batch method
3. Flow method
production and operations management(POM) Complete note kabul university
ย
The Introduction to POM, Scope, Role, and Objectives of POM, Operations Mgt. โ Concept; Functions
Product Design and its characteristics;
Product Development Process, Product Development Techniques.
Production Planning and Control
Objective of PPC
There are three stages in PPC
Classification/Functions of PPC
Benefits of PPC
Limitations of PPC
Production Planning / Operations Planning
Factors determining Production Planning Procedures
Production Planning System
Production Control
Factors Determining PC procedures
Main Functions of Production Planning
& Control Department
Plant Planning & Facility Planning
Supply Chain Management: Context, Collaboration and CompetitionRichard Farr
ย
Why are supply chains as they are? Who decides what jobs a company should do, and which ones should be left to others? These slides encourage the learner to think about the company operations in their supply chain context, with reference to established principles such as Porter's Five Forces, and Brandenburger and Nalebuff's work on coopetition. Suggested student activities are included, and the presentation can be downloaded.
Types of production system (production and operation management)Yamini Kahaliya
ย
this document contains Types of production system
(In our introduction to production and operations management ("POM") we suggested that there are several different methods of handling the conversion or production process - Job, Batch, Flow and Group. This revision note explains these methods in more detail.)
1. Job method
2. Batch method
3. Flow method
Chapter 5. Supply Planning: Meeting Customer Demand
After weโve made our best estimate of a demand forecast for goods or services and netted it against our current and targeted inventory position to determine our future inventory requirements, it becomes necessary to make sure that we have enough capacity to meet the anticipated demand.
When we think of planning the capacity for a goods or service business, we typically think in terms of three time horizons:
Long rangeย (1-3+ years) โ Where we need to add facilities and equipment that have a long lead time.
Medium rangeย (roughly 2 to 12 months), we can add equipment, personnel, and shifts; we can subcontract production and/or we can build or use inventory. This is known as โaggregate planningโ.
Short rangeย (up to 2-3 months) โMainly focused upon scheduling production and people, as well as allocating machinery, generally referred to as production planning. It is hard to adjust capacity in the short run since we are usually constrained by existing capacity.
The supply chain and logistics function must actively support all of the above by supplying material and components for production and product to the customer and in fact has many of its own capacity constraints in terms of its distribution and transportation services.
In many service organizations, the actual work of capacity and supply planning for the production of inventory may be partially or totally in another organization as is the case of retailers or wholesalers. But even in those instances, retail and wholesale supply chain organizations are intertwined with the vendorโs manufacturing process, so they should participate, support and integrate vendor production plans into their own processes when possible. Additionally, service organizations have capacity constraints in terms of various resources that are impacted by inventory levels (ex: labor, warehouse capacity, back room retail storage, shelf space, etc). So it is well worth understanding the aggregate planning process no matter where you are in the supply chain.
The Process Decision
Stepping back for the moment, it should be understood that all organizations, both goods and services, have to make what is known as the process decision. That is, how the goods or services are to be delivered.
In most established organizations, there is already an existing process that is usually based upon the industry and managements competitive strategy.
Goods and Service Processes
Process choices in goods and service industries can be defined and delineated by what has become to be known as the โproduct-process matrixโ (
Hayes and Wheelwright; 1979; Chart 5.1). In this model, an organizationโs process choices are based upon both the volume produced and variety of products. At the upper left of the chart, companies are considered process oriented or focused and those in the lower right are considered product focused. The ultimate decision of where a firm lo.
Improving profitability for small businessBen Wann
ย
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
ย
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
"๐ฉ๐ฌ๐ฎ๐ผ๐ต ๐พ๐ฐ๐ป๐ฏ ๐ป๐ฑ ๐ฐ๐บ ๐ฏ๐จ๐ณ๐ญ ๐ซ๐ถ๐ต๐ฌ"
๐๐ ๐๐จ๐ฆ๐ฌ (๐๐ ๐๐จ๐ฆ๐ฆ๐ฎ๐ง๐ข๐๐๐ญ๐ข๐จ๐ง๐ฌ) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
๐๐ ๐๐จ๐ฆ๐ฌ provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
โญ ๐ ๐๐๐ญ๐ฎ๐ซ๐๐ ๐ฉ๐ซ๐จ๐ฃ๐๐๐ญ๐ฌ:
โข 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
โข SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
โขFreenBecky 1st Fan Meeting in Vietnam
โขCHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
โข WOW K-Music Festival 2023
โข Winner [CROSS] Tour in HCM
โข Super Show 9 in HCM with Super Junior
โข HCMC - Gyeongsangbuk-do Culture and Tourism Festival
โข Korean Vietnam Partnership - Fair with LG
โข Korean President visits Samsung Electronics R&D Center
โข Vietnam Food Expo with Lotte Wellfood
"๐๐ฏ๐๐ซ๐ฒ ๐๐ฏ๐๐ง๐ญ ๐ข๐ฌ ๐ ๐ฌ๐ญ๐จ๐ซ๐ฒ, ๐ ๐ฌ๐ฉ๐๐๐ข๐๐ฅ ๐ฃ๐จ๐ฎ๐ซ๐ง๐๐ฒ. ๐๐ ๐๐ฅ๐ฐ๐๐ฒ๐ฌ ๐๐๐ฅ๐ข๐๐ฏ๐ ๐ญ๐ก๐๐ญ ๐ฌ๐ก๐จ๐ซ๐ญ๐ฅ๐ฒ ๐ฒ๐จ๐ฎ ๐ฐ๐ข๐ฅ๐ฅ ๐๐ ๐ ๐ฉ๐๐ซ๐ญ ๐จ๐ ๐จ๐ฎ๐ซ ๐ฌ๐ญ๐จ๐ซ๐ข๐๐ฌ."
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
ย
Discover the innovative and creative projects that highlight my journey throughย Full Sail University. Below, youโll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
ย
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
ย
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
ย
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
๐ข Email Access
๐ข Bank Added
๐ข Card Verified
๐ข Full SSN Provided
๐ข Phone Number Access
๐ข Driving License Copy
๐ข Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1โช(218) 203-5951โฌ
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
ย
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Exploring Patterns of Connection with Social Dreaming
ย
Production and operations managment notes
1. Chapter 1:
Introduction to production and
operations management
Definition
Production and Operations Management ("POM") is about the transformation of
production and operational inputs into "outputs" that, when distributed, meet the needs of
customers.
The process in the above diagram is often referred to as the "Conversion Process".
There are several different methods of handling the conversion or production process -
Job, Batch, Flow and Group
POM incorporates many tasks that are interdependent, but which can be grouped under
five main headings:
PRODUCT
Marketers in a business must ensure that a business sells products that meet customer
needs and wants. The role of Production and Operations is to ensure that the business
actually makes the required products in accordance with the plan. The role of PRODUCT
in POM therefore concerns areas such as:
- Performance
2. - Aesthetics
- Quality
- Reliability
- Quantity
- Production costs
- Delivery dates
PLANT
To make PRODUCT, PLANT of some kind is needed. This will comprise the bulk of the
fixed assets of the business. In determining which PLANT to use, management must
consider areas such as:
- Future demand (volume, timing)
- Design and layout of factory, equipment, offices
- Productivity and reliability of equipment
- Need for (and costs of) maintenance
- Heath and safety (particularly the operation of equipment)
- Environmental issues (e.g. creation of waste products)
PROCESSES
There are many different ways of producing a product. Management must choose the best
process, or series of processes. They will consider:
- Available capacity
- Available skills
- Type of production
- Layout of plant and equipment
- Safety
- Production costs
- Maintenance requirements
PROGRAMMES
The production PROGRAMME concerns the dates and times of the products that are to
be produced and supplied to customers. The decisions made about programme will be
influenced by factors such as:
- Purchasing patterns (e.g. lead time)
- Cash flow
- Need for / availability of storage
- Transportation
PEOPLE
3. Production depends on PEOPLE, whose skills, experience and motivation vary. Key
people-related decisions will consider the following areas:
- Wages and salaries
- Safety and training
- Work conditions
- Leadership and motivation
- Unionisation
- Communication
Chapter 2:
Capacity management - the meaning of
capacity
Introduction
The capacity of a production unit (e.g. machine, factory) is its ability to produce or do
that which the customer requires. In production and operations management, three types
of capacity are often referred to:
Potential The capacity that can be made available to influence the planning of
Capacity senior management (e.g. in helping them to make decisions about
overall business growth, investment etc). This is essentially a long-
term decision that does not influence day-to-day production
management
Immediate The amount of production capacity that can be made available in the
Capacity short-term. This is the maximum potential capacity - assuming that it
is used productively
Effective An important concept. Not all productive capacity is actually used or
Capacity usable. It is important for production managers to understand what
capacity is actually achievable.
Measuring capacity
Capacity, being the ability to produce work in a given time, must be measured in the unit
of work.
4. For example, consider a factory that has a capacity of 10,000 " machine hours" in each 40
hour week. This factory should be capable of producing 10,000 "standard hours of work"
during a 40-hour week. The actual volume of product that the factory can produce will
depend on:
- the amount of work involved in production (e.g. does a product require 1, 5, 10 standard
hours?
- any additional time required in production (e.g. machine set-up, maintenance)
- the productivity or effectiveness of the factory
Constraints on capacity
In capacity management there are usually two potential constraints - TIME and
CAPACITY
Time may be a constraint where a customer has a particular required delivery date. In this
situation, capacity managers often "plan backwards". In other words, they allocate the
final stage (operation) of the production tasks to the period where delivery is required; the
penultimate task one period earlier and so on. This process helps identify whether there is
sufficient time to meet the production demands and whether capacity needs to be
increased, albeit temporarily.
Production Scheduling
A schedule is a representation of the time necessary to carry out a particular task.
A job schedule shows the plan for the manufacture of a particular job. It is created
through "work / study" reviews which determine the method and times required.
Most businesses carry out several production tasks at one time - which entails
amalgamating several job schedules. This process is called "scheduling". The result is
known as the production schedule or factory schedule for the factory/plant as a whole.
In preparing a production schedule, attention needs to be paid to:
- Delivery dates (when are finished products due?)
- Job schedules for each relevant production task
- Capacities of production sections or departments involved
- Efficiency of these production sections or departments
- Planned holidays
- Anticipated sickness / absenteeism / training
- Availability of raw materials, components and packaging
There are two key problems with production scheduling:
5. (1) Measurement of performance (e.g. should financial performance be most important
(e.g. minimise the amount of stock), or are marketing objectives more important - e.g.
always produce enough to meet customer demand).
(2) The large number of possible schedules - often caused by too much complexity or
variety in the production needs of the business.
Chapter 3:
Production - types of production method
Definition
In our introduction to production and operations management ("POM") we suggested that
there are several different methods of handling the conversion or production process -
Job, Batch, Flow and Group. This revision note explains these methods in more detail.
Introduction
The various methods of production are not associated with a particular volume of
production. Similarly, several methods may be used at different stages of the overall
production process.
Job Method
With Job production, the complete task is handled by a single worker or group of
workers. Jobs can be small-scale/low technology as well as complex/high technology.
Low technology jobs: here the organisation of production is extremely simply, with the
required skills and equipment easily obtainable. This method enables customer's specific
requirements to be included, often as the job progresses. Examples include: hairdressers;
tailoring
High technology jobs: high technology jobs involve much greater complexity - and
therefore present greater management challenge. The important ingredient in high-
technology job production is project management, or project control. The essential
features of good project control for a job are:
6. - Clear definitions of objectives - how should the job progress (milestones, dates, stages)
- Decision-making process - how are decisions taking about the needs of each process in
the job, labour and other resources
Examples of high technology / complex jobs: film production; large construction projects
(e.g. the Millennium Dome)
Batch Method
As businesses grow and production volumes increase, it is not unusual to see the
production process organised so that "Batch methods" can be used.
Batch methods require that the work for any task is divided into parts or operations. Each
operation is completed through the whole batch before the next operation is performed.
By using the batch method, it is possible to achieve specialisation of labour. Capital
expenditure can also be kept lower although careful planning is required to ensure that
production equipment is not idle. The main aims of the batch method are, therefore, to:
- Concentrate skills (specialisation)
- Achieve high equipment utilisation
This technique is probably the most commonly used method for organising manufacture.
A good example is the production of electronic instruments.
Batch methods are not without their problems. There is a high probability of poor work
flow, particularly if the batches are not of the optimal size or if there is a significant
difference in productivity by each operation in the process. Batch methods often result in
the build up of significant "work in progress" or stocks (i.e. completed batches waiting
for their turn to be worked on in the next operation).
Flow Methods
Flow methods are similar to batch methods - except that the problem of rest/idle
production/batch queuing is eliminated.
Flow has been defined as a "method of production organisation where the task is worked
on continuously or where the processing of material is continuous and progressive,"
The aims of flow methods are:
- Improved work & material flow
- Reduced need for labour skills
- Added value / completed work faster
Flow methods mean that as work on a task at a particular stage is complete, it must be
passed directly to the next stage for processing without waiting for the remaining tasks in
7. the "batch". When it arrives at the next stage, work must start immediately on the next
process. In order for the flow to be smooth, the times that each task requires on each
stage must be of equal length and there should be no movement off the flow production
line. In theory, therefore, any fault or error at a particular stage
In order that flow methods can work well, several requirements must be met:
(1) There must be substantially constant demand
If demand is unpredictable or irregular, then the flow production line can lead to a
substantial build up of stocks and possibility storage difficulties. Many businesses using
flow methods get round this problem by "building for stock" - i.e. keeping the flow line
working during quiet periods of demand so that output can be produced efficiently.
(2) The product and/or production tasks must be standardised
Flow methods are inflexible - they cannot deal effectively with variations in the product
(although some "variety" can be accomplished through applying different finishes,
decorations etc at the end of the production line).
(3) Materials used in production must be to specification and delivered on time
Since the flow production line is working continuously, it is not a good idea to use
materials that vary in style, form or quality. Similarly, if the required materials are not
available, then the whole production line will come to a close - with potentially serious
cost consequences.
(4) Each operation in the production flow must be carefully defined - and recorded
in detail
(5) The output from each stage of the flow must conform to quality standards
Since the output from each stage moves forward continuously, there is no room for sub-
standard output to be "re-worked" (compare this with job or batch production where it is
possible to compensate for a lack of quality by doing some extra work on the job or the
batch before it is completed).
The achievement of a successful production flow line requires considerable planning,
particularly in ensuring that the correct production materials are delivered on time and
that operations in the flow are of equal duration.
Common examples where flow methods are used are the manufacture of motor cars,
chocolates and televisions.
8. Chapter 4:
Introduction to break-even analysis
Introduction
Break-even analysis is a technique widely used by production management and
management accountants. It is based on categorising production costs between those
which are "variable" (costs that change when the production output changes) and those
that are "fixed" (costs not directly related to the volume of production).
Total variable and fixed costs are compared with sales revenue in order to determine the
level of sales volume, sales value or production at which the business makes neither
a profit nor a loss (the "break-even point").
The Break-Even Chart
In its simplest form, the break-even chart is a graphical representation of costs at various
levels of activity shown on the same chart as the variation of income (or sales, revenue)
with the same variation in activity. The point at which neither profit nor loss is made is
known as the "break-even point" and is represented on the chart below by the intersection
of the two lines:
9. In the diagram above, the line OA represents the variation of income at varying levels of
production activity ("output"). OB represents the total fixed costs in the business. As
output increases, variable costs are incurred, meaning that total costs (fixed + variable)
also increase. At low levels of output, Costs are greater than Income. At the point of
intersection, P, costs are exactly equal to income, and hence neither profit nor loss is
made.
Fixed Costs
Fixed costs are those business costs that are not directly related to the level of production
or output. In other words, even if the business has a zero output or high output, the level
of fixed costs will remain broadly the same. In the long term fixed costs can alter -
perhaps as a result of investment in production capacity (e.g. adding a new factory unit)
or through the growth in overheads required to support a larger, more complex business.
Examples of fixed costs:
- Rent and rates
- Depreciation
- Research and development
- Marketing costs (non- revenue related)
- Administration costs
Variable Costs
Variable costs are those costs which vary directly with the level of output. They represent
payment output-related inputs such as raw materials, direct labour, fuel and revenue-
related costs such as commission.
A distinction is often made between "Direct" variable costs and "Indirect" variable
costs.
Direct variable costs are those which can be directly attributable to the production of a
particular product or service and allocated to a particular cost centre. Raw materials and
the wages those working on the production line are good examples.
Indirect variable costs cannot be directly attributable to production but they do vary with
output. These include depreciation (where it is calculated related to output - e.g. machine
hours), maintenance and certain labour costs.
Semi-Variable Costs
Whilst the distinction between fixed and variable costs is a convenient way of
categorising business costs, in reality there are some costs which are fixed in nature but
which increase when output reaches certain levels. These are largely related to the overall
"scale" and/or complexity of the business. For example, when a business has relatively
low levels of output or sales, it may not require costs associated with functions such as
10. human resource management or a fully-resourced finance department. However, as the
scale of the business grows (e.g. output, number people employed, number and
complexity of transactions) then more resources are required. If production rises suddenly
then some short-term increase in warehousing and/or transport may be required. In these
circumstances, we say that part of the cost is variable and part fixed.
Chapter 5:
Quality management - introduction
One of the most important issues that businesses have focused on in the last 20-30 years
has been quality. As markets have become much more competitive - quality has become
widely regarded as a key ingredient for success in business. In this revision note, we
introduce what is meant by quality by focusing on the key terms you will come up
against.
What is quality? You will comes across several terms that all seem to relate to the
concept of quality. It can be quite confusing working out what the difference is between
them. We've defined the key terms that you need to know below:
Term Description
Quality Quality is first and foremost about meeting the needs and expectations of
customers. It is important to understand that quality is about more than a product
simply "working properly".
Think about your needs and expectations as a customer when you buy a product or
service. These may include performance, appearance, availability, delivery,
reliability, maintainability, cost effectiveness and price.
Think of quality as representing all the features of a product or service that affect its
ability to meet customer needs. If the product or service meets all those needs - then
it passes the quality test. If it doesn't, then it is sub-standard.
11. Quality management Producing products of the required quality does not happen by accident. There has to
be a production process which is properly managed. Ensuring satisfactory quality is
a vital part of the production process.
Quality management is concerned with controlling activities with the aim of
ensuring that products and services are fit for their purpose and meet the
specifications. There are two main parts to quality management
(1) Quality assurance
(2) Quality control
Quality assurance Quality assurance is about how a business can design the way a product of service is
produced or delivered to minimise the chances that output will be sub-standard. The
focus of quality assurance is, therefore on the product design/development stage.
Why focus on these stages? The idea is that - if the processes and procedures used to
produce a product or service are tightly controlled - then quality will be "built-in".
This will make the production process much more reliable, so there will be less need
to inspect production output (quality control).
Quality assurance involves developing close relationships with customers and
suppliers. A business will want to make sure that the suppliers to its production
process understand exactly what is required - and deliver!
Quality control Quality control is the traditional way of managing quality. A further revision note
(see the list on the right) deals with this in more detail.
Quality control is concerned with checking and reviewing work that has been done.
For example, this would include lots of inspection, testing and sampling.
Quality control is mainly about "detecting" defective output - rather than preventing
it. Quality control can also be a very expensive process. Hence, in recent years,
businesses have focused on quality management and quality assurance.
Total quality Total quality management (usually shortened to "TQM") is a modern form of
management quality management. In essence, it is about a kind of business philosophy which
emphasises the need for all parts of a business to continuously look for ways to
improve quality. We cover this important concept in further revision notes.
12. Chapter 6:
Quality control
Quality control is the more traditional way that businesses have used to manage quality.
Quality control is concerned with checking and reviewing work that has been done. But is this the best
way for a business to manage quality?
Under traditional quality control, inspection of products and services (checking to make
sure that what's being produced is meeting the required standard) takes place during and
at the end of the operations process.
There are three main points during the production process when inspection is performed:
1 When raw materials are received prior to entering production
2 Whilst products are going through the production process
3 When products are finished - inspection or testing takes place before products are despatched to
customers
The problem with this sort of inspection is that it doesn't work very well!
There are several problems with inspection under traditional quality control:
1 The inspection process does not add any "value". If there were any guarantees that no defective output
would be produced, then there would be no need for an inspection process in the first place!
2 Inspection is costly, in terms of both tangible and intangible costs. For example, materials, labour, time,
employee morale, customer goodwill, lost sales
3 It is sometimes done too late in the production process. This often results in defective or non-
acceptable goods actually being received by the customer
4 It is usually done by the wrong people - e.g. by a separate "quality control inspection team" rather than
by the workers themselves
5 Inspection is often not compatible with more modern production techniques (e.g. "Just in Time
Manufacturing") which do not allow time for much (if any) inspection.
6 Working capital is tied up in stocks which cannot be sold
13. 7 There is often disagreement as to what constitutes a "quality product". For example, to meet quotas,
inspectors may approve goods that don't meet 100% conformance, giving the message to workers that
it doesn't matter if their work is a bit sloppy. Or one quality control inspector may follow different
procedures from another, or use different measurements.
As a result of the above problems, many businesses have focused their efforts on
improving quality by implementing quality management techniques - which emphasise
the role of quality assurance. As Deming (a "quality guru") wrote:
"Inspection with the aim of finding the bad ones and throwing them out is too late,
ineffective, costly. Quality comes not from inspection but from improvement of the
process."
Chapter 7:
Total quality management - TQM
Total quality management is a popular "quality management" concept. However, it is
about much more than just assuring product or service quality. TQM is a business
philosophy - a way of doing business. It describes ways to managing people and business
processes to ensure complete customer satisfaction at every stage. TQM is often
associated with the phrase - "doing the right things right, first time". This revision note
summarises the main features of TQM.
Like most quality management concepts, TQM views "quality" entirely from the point
of view of "the customer".
All businesses have many types of customer. A customer can be someone "internal" to
the business (e.g. a production employee working at the end of the production line is the
"customer" of the employees involved earlier in the production process).
A customer can also be "external to the business. This is the kind of customer you will be
familiar with. When you fly with an airline you are their customer. When Tesco's buys
products from food manufacturers, it is a customer.
14. TQM recognises that all businesses require "processes" that enable customer
requirements to be met. TQM focuses on the ways in which these processes can be
managed - with two key objectives:
1 100% customer satisfaction
2 Zero defects
The Importance of Customer - Supplier Relationships - "Quality Chains"
TQM focuses strongly on the importance of the relationship between customers (internal
and external) and supplier. These are known as the "quality chainsโ and they can be
broken at any point by one person or one piece of equipment not meeting the
requirements of the customer. Failure to meet the requirements in any part of a quality
chain has a way of multiplying, and failure in one part of the system creates problems
elsewhere, leading to yet more failure and problems, and so the situation is exacerbated.
The ability to meet customersโ (external and internal) requirements is vital. To achieve
quality throughout a business, every person in the quality chain must be trained to ask the
following questions about every customer-supplier chain:
Customers
โข Who are my customers?
โข What are their real needs and expectations?
โข How can I measure my ability to meet their needs and expectations?
โข Do I have the capability to meet their needs and expectations? (If not, what must I do to
improve this capability?)
โข Do I continually meet their needs and expectations? (If not, what prevents this from
happening when the capability exists?)
โข How do I monitor changes in their needs and expectations?
Suppliers:
โข Who are my internal suppliers?
โข What are my true needs and expectations?
โข How do I communicate my needs and expectations to my suppliers?
โข Do my suppliers have the capability to measure and meet these needs and expectations?
โข How do I inform them of changes in my needs and expectations?
Main Principles of TQM
The main principles that underlie TQM are summarised below:
Prevention Prevention is better than cure. In the long run, it is cheaper to stop products
defects than trying to find them
15. Zero defects The ultimate aim is no (zero) defects - or exceptionally low defect levels if a
product or service is complicated
Getting things right first Better not to produce at all than produce something defective
time
Quality involves everyone Quality is not just the concern of the production or operations department - it
involves everyone, including marketing, finance and human resources
Continuous improvement Businesses should always be looking for ways to improve processes to help
quality
Employee involvement Those involved in production and operations have a vital role to play in
spotting improvement opportunities for quality and in identifying quality
problems
Introducing TQM into a Business
TQM is not an easy concept to introduce into businesses - particularly those that have not
traditionally concerned themselved too much with understanding customer needs and
business processes. In fact - many attempts to introduce TQM fail!
One of the reasons for the challenge of introducing TQM is that it has significant
implications for the whole business.
For example, it requires that management give employees a say in the production
processes that they are involved in. In a culture of continuous improvement, workforce
views are invaluable. The problem is - many businesses have barriers to involvement. For
example, middle managers may feel that their authority is being challenged.
So "empowerment" is a crucial part of TQM. The key to success is to identify the
management culture before attempting to install TQM and to take steps to change
towards the management style required for it. Since culture is not the first thing that
managers think about, this step has often been missed or ignored with resultant failure of
a TQM strategy.
TQM also focuses the business on the activities of the business that are closest to the
customer - e.g. the production department, the employees facing the customer. This can
cause resentment amongst departments that previously considered themselves "above"
the shop floor.
( The End)