Microprocessors:Types & Comparison of Microprocessors
•Download as PPTX, PDF•
0 likes•78 views
The document discusses processors and defines a microprocessor as a controlling unit fabricated on a silicon chip that can perform arithmetic and logical operations and communicate with connected devices. It consists of an ALU, register array, and control unit. The document lists different types of processors including GPUs, PPUs, and DSPs. It provides examples of CPU manufacturers and compares specifications of some processors. It concludes with a quiz to test the reader's understanding.
Report
Share
Report
Share
Recommended
CPU Hardware
The document discusses the various hardware components that make up a computer system. It describes the motherboard as the main circuit board that connects all the components together, including the CPU, RAM, graphics card, hard disk, power supply, and other parts. Storage units and their standard sizes like bytes, kilobytes, megabytes, and terabytes are defined. Common processor brands and the recommended RAM and uses for different levels of computer systems are outlined. Peripheral devices like DVD drives, floppy disks, memory cards, and more are also listed.
Input
The document describes the main types of computer hardware components. It discusses input hardware such as keyboards, mice, scanners and microphones. It also covers output hardware like printers, displays and speakers. Processing hardware is described as the central processing unit, control unit and arithmetic logic unit. Storage hardware includes memory, hard disks, optical disks, tapes and flash drives. Communication hardware facilitates network connections. Peripherals expand a computer's capabilities and ports provide interfaces between devices.
Cpu
The document discusses the central processing unit (CPU) and its components. It provides:
1. An overview of CPUs, from early mainframe computers that used printed circuit boards to modern computers that use a single microprocessor chip.
2. Details on the physical components of the CPU, including its pins, socket, heat sink, and fan.
3. Descriptions of the key internal components of the CPU, specifically the control unit which coordinates components, and the arithmetic logic unit which performs calculations.
4. Examples of different types of microprocessors used in modern computers from Intel, including dual and quad-core models.
Central Processing Unit (Cpu)kurdish
The document discusses the central processing unit (CPU). It defines the CPU as the component inside a computer that performs most processing tasks and controls data flow. The main components of a CPU are the control unit, which extracts and executes instructions; the arithmetic logic unit (ALU), which handles arithmetic and logical operations; and registers, which are temporary memory used for calculations. RAM works with the CPU by providing temporary memory that the CPU retrieves data from to perform operations. A CPU fan is also discussed as being important for cooling the CPU and preventing overheating.
39245196 intro-es-iii
The document describes three types of embedded systems: small scale, medium scale, and sophisticated. Small scale systems use a single microcontroller with little hardware/software complexity. Medium scale systems can use multiple microcontrollers or DSPs with more complex hardware/software. Sophisticated systems have significant hardware/software complexity and may require specialized processors. The document also discusses different types of processors used in embedded systems like microprocessors, microcontrollers, DSPs, and application-specific processors.
Esd module2
This document discusses processor design, including custom single-purpose processors and general-purpose processors. It covers topics such as combinational and sequential logic design, finite state machine design, optimizing custom processors by improving the original program, finite state machine with datapath, and datapath and finite state machine. General-purpose processors are also introduced, including their basic architecture consisting of a control unit and datapath.
Embedded system custom single purpose processors
The document discusses several topics related to digital circuits and processors:
- Custom single-purpose processors are designed for a specific computation task and can be fast, small and low power but require more design time and are less flexible than general purpose processors.
- Combinational logic circuits have outputs determined solely by current inputs while sequential logic circuits have memory of past inputs.
- The document also discusses CMOS transistors, basic logic gates, and the design of combinational and sequential logic circuits.
پارچەکانی کۆمپیوتەر computer components
The document outlines the basic components of a computer and provides a brief description of what each component does:
1. The power supply reduces mains electricity to lower voltages to power components like the hard drive, DVD ROM, and motherboard.
2. The motherboard receives power from the power supply and distributes it to other components like the RAM, CPU, and ports. It is the central component of a computer.
3. The CPU performs computations and processes data input into information output. It contains circuits that execute stored program instructions.
Recommended
CPU Hardware
The document discusses the various hardware components that make up a computer system. It describes the motherboard as the main circuit board that connects all the components together, including the CPU, RAM, graphics card, hard disk, power supply, and other parts. Storage units and their standard sizes like bytes, kilobytes, megabytes, and terabytes are defined. Common processor brands and the recommended RAM and uses for different levels of computer systems are outlined. Peripheral devices like DVD drives, floppy disks, memory cards, and more are also listed.
Input
The document describes the main types of computer hardware components. It discusses input hardware such as keyboards, mice, scanners and microphones. It also covers output hardware like printers, displays and speakers. Processing hardware is described as the central processing unit, control unit and arithmetic logic unit. Storage hardware includes memory, hard disks, optical disks, tapes and flash drives. Communication hardware facilitates network connections. Peripherals expand a computer's capabilities and ports provide interfaces between devices.
Cpu
The document discusses the central processing unit (CPU) and its components. It provides:
1. An overview of CPUs, from early mainframe computers that used printed circuit boards to modern computers that use a single microprocessor chip.
2. Details on the physical components of the CPU, including its pins, socket, heat sink, and fan.
3. Descriptions of the key internal components of the CPU, specifically the control unit which coordinates components, and the arithmetic logic unit which performs calculations.
4. Examples of different types of microprocessors used in modern computers from Intel, including dual and quad-core models.
Central Processing Unit (Cpu)kurdish
The document discusses the central processing unit (CPU). It defines the CPU as the component inside a computer that performs most processing tasks and controls data flow. The main components of a CPU are the control unit, which extracts and executes instructions; the arithmetic logic unit (ALU), which handles arithmetic and logical operations; and registers, which are temporary memory used for calculations. RAM works with the CPU by providing temporary memory that the CPU retrieves data from to perform operations. A CPU fan is also discussed as being important for cooling the CPU and preventing overheating.
39245196 intro-es-iii
The document describes three types of embedded systems: small scale, medium scale, and sophisticated. Small scale systems use a single microcontroller with little hardware/software complexity. Medium scale systems can use multiple microcontrollers or DSPs with more complex hardware/software. Sophisticated systems have significant hardware/software complexity and may require specialized processors. The document also discusses different types of processors used in embedded systems like microprocessors, microcontrollers, DSPs, and application-specific processors.
Esd module2
This document discusses processor design, including custom single-purpose processors and general-purpose processors. It covers topics such as combinational and sequential logic design, finite state machine design, optimizing custom processors by improving the original program, finite state machine with datapath, and datapath and finite state machine. General-purpose processors are also introduced, including their basic architecture consisting of a control unit and datapath.
Embedded system custom single purpose processors
The document discusses several topics related to digital circuits and processors:
- Custom single-purpose processors are designed for a specific computation task and can be fast, small and low power but require more design time and are less flexible than general purpose processors.
- Combinational logic circuits have outputs determined solely by current inputs while sequential logic circuits have memory of past inputs.
- The document also discusses CMOS transistors, basic logic gates, and the design of combinational and sequential logic circuits.
پارچەکانی کۆمپیوتەر computer components
The document outlines the basic components of a computer and provides a brief description of what each component does:
1. The power supply reduces mains electricity to lower voltages to power components like the hard drive, DVD ROM, and motherboard.
2. The motherboard receives power from the power supply and distributes it to other components like the RAM, CPU, and ports. It is the central component of a computer.
3. The CPU performs computations and processes data input into information output. It contains circuits that execute stored program instructions.
Lecture1 - Computer Architecture
This document provides an overview of computer architecture and microprocessors. It describes what a microprocessor is, its key design objectives of maximizing performance and productivity within constraints like power and area. It outlines the internal structure of a processor including the control unit, ALU, and register file. The document also discusses instruction set architecture, assembly code, types of instructions, encoding instructions into binary, and different number systems used.
Central processing unit
The CPU, or central processing unit, processes all information and instructions used by a computer to control its parts. It is made up of millions of tiny switches called transistors mounted on a silicon chip. The speed at which a CPU processes data is measured in megahertz or gigahertz, and processors are becoming faster, with one gigahertz equaling one billion cycles per second. The major manufacturers of CPUs for computers are Intel with its Pentium processors and AMD with its Athlon processors, although other companies like IBM also produce processors.
Choosing the right processor
The document discusses choosing the right processor for an application. It covers microprocessors, microcontrollers, DSP processors, FPGAs, CPLDs, hardware design flow, software design flow, and various embedded system design phases like simulation, evaluation and emulation. Key factors in processor selection include development tools, performance, cost, operating systems, hardware tools, peripherals and power consumption. The document also provides resources and websites for embedded system development.
Computerapplicationsnotesgrade6 120320153437-phpapp01
This document discusses different types of computers and their components. It describes mainframe, minicomputer, and microcomputers based on their size, cost, and data storage capacity. The four main parts of a computer are the input, output, memory, and central processing unit (CPU). The CPU consists of a control unit and arithmetic logic unit (ALU). Computer chips use integrated circuits to process digital or analog electrical signals. Memory includes random access memory (RAM) and read only memory (ROM). The document also defines other computer terms like bits, bytes, gigabytes, hardware, software, binary code, and ASCII code.
Lec02-CS110 Computational Engineering
This lecture discusses the history and evolution of computing hardware from early mechanical calculators and looms to modern computers. It describes Charles Babbage's analytical engine, considered the first general-purpose computer. The lecture outlines the development of hardware components like the CPU and memory and how early computers like ENIAC used vacuum tubes. It explains the basic structure of a computer as having a processor and memory, with programs stored as instructions and data. The lecture also introduces the concept of variables, data types, and how instructions operate on data through examples.
Components of the computer
A computer has four main functions: input, processing, output, and storage. It has five key components that enable these functions: the central processing unit (CPU), memory, input units, output units, and storage. The CPU contains the control unit which directs the flow of data and signals, and the arithmetic logic unit which performs basic math and logic operations.
Computer hardware
The document provides a brief history and overview of computer hardware. It discusses how computers have evolved from early machines like ENIAC built in the 1940s in the US to modern devices like the Macbook Pro now made in China. It defines a computer as an electronic machine that accepts input, processes it, and provides output which is stored for later use. The key components of computer hardware are then outlined, including the central processing unit, memory, storage, and input/output devices.
Introduction to Computer Architecture
The document provides an introduction to computer architecture. It discusses binary numbers and the bit and byte units used to measure digital information. It describes the major components of a computer system, including the central processing unit (CPU), memory, hard drives, and input/output components. The CPU functions are explained, including fetching and executing instructions through a cycle and using registers, caches, and memory in a hierarchy. Direct access memory like RAM is faster than sequential access storage like hard disks.
Embedded System-design technology
The document discusses design technology for embedded systems. It covers several key topics:
- There is a tradeoff between hardware and software implementation based on metrics like performance, power, size, and flexibility. Hardware and software design are now viewed together.
- Improving productivity involves automation through synthesis and reuse using predesigned components like processor cores. Verification ensures designs are correct and complete.
- Emulators can simulate systems faster than software simulation by mapping designs to FPGAs. This allows testing in real environments. Intellectual property cores provide predesigned processors and components for reuse.
Hardware (2)
This document discusses the key components of a computer system, including the central processing unit (CPU), memory (RAM), storage devices, graphics cards, expansion cards, and input/output devices. It describes the functions of the CPU, RAM, hard drives, optical drives, graphics cards and video connectors. It also covers factors like CPU clock speed, cores, RAM sizes, graphics card memory and processing units. The document is an introduction to basic computer hardware components and specifications.
Internal hardware
Internal hardware refers to the components inside a computer case that work together to process instructions and transfer data. This includes the CPU for running software, RAM for temporary data storage, ROM for startup instructions, a graphics card for displaying visuals, a motherboard connecting all parts, optional sound and network cards, and cooling fans to prevent overheating.
Central Processing Unit
The document discusses the history and components of the central processing unit (CPU). It describes how the CPU originated from concepts developed in the 1940s and evolved from large mainframe computers to smaller microprocessors. The key components of the CPU are the control unit, arithmetic logic unit, and memory unit. The CPU functions by fetching instructions from memory, decoding and translating them, executing calculations and data movement, and storing results.
Introduction of cpu
The document provides an introduction to microprocessors. It defines a microprocessor as the central processing unit (CPU) of a computer. The history section outlines some important early microprocessors, including the 4-bit Intel 4004 from 1971, the 8-bit Intel 8080 and 8085 from the 1970s, and the 32-bit Pentium from 1995. It also discusses more recent microprocessors like Intel's 64-bit Core series from 2007 and Haswell architecture. The document explains that a microprocessor is capable of arithmetic, logical operations through its arithmetic logic unit (ALU) and controls data flow between memory and peripherals through its control unit. It provides references for further information.
Microprocesser
A microprocessor is an integrated circuit that contains the functions of a central processing unit. It accepts digital input, processes it according to programmed instructions, and provides results as output. Early microprocessors from the 1970s included the Intel 4004, the world's first commercially available microprocessor. Modern microprocessors are used in a wide variety of applications from personal computers to embedded systems in devices like appliances and vehicles. They have transformed modern society through uses like computation, communication, and digital control.
Information Processing Cycle
This document discusses the key components of computer systems: input, processing, storage, and output. It lists common input devices like keyboards and mice that send data to computers. It describes processing as passing data through stages and the CPU as the component that performs operations. It defines output as any information sent from the computer via monitors, printers, or other devices. It also discusses storage devices like hard drives that hold processed data for future use.
Computer
This document summarizes computer hardware components. It divides hardware into three main groups: input devices, output devices, and the system unit. Input devices like keyboards and mice are used to enter data, while output devices like monitors and printers display or print data. The system unit contains the central processing unit and memory that process data, as well as peripheral components like the motherboard, hard disk drive, ports and power supply.
Computer hardware
Computer hardware are the physical parts or components of a computer, such as the central processing unit, monitor, keyboard, computer data storage, graphic card, sound card and motherboard.
Cpu presentation
The document discusses the CPU (central processing unit), which is the brain of the computer that carries out instructions. It describes the parts of the CPU including the socket and cooling assembly. The summary provides step-by-step instructions for removing an old CPU, installing a new CPU, applying thermal compound, and securing the cooling assembly.
Chapter 2: Computer Hardware (Revision)
This document provides an overview of the main components of a computer system. It describes how a computer takes in input, processes data, stores information, and produces output. Specifically, it defines input devices like keyboards and mice, the central processing unit and motherboard as the devices responsible for processing, storage devices like hard disks that save information, and output devices such as monitors, printers, and speakers. The learning objectives are to describe the hardware components of a computer, provide examples of devices that handle input, output, storage and processing tasks, and differentiate types of input and output devices.
Cpu
The CPU interprets instructions and performs logical and arithmetic operations to control the computer. It follows a machine cycle of fetching instructions from memory, decoding them, executing the operations, and storing results. The CPU consists of a control unit that manages resources and a machine cycle, and an ALU that performs arithmetic and logical functions according to the control unit's instructions.
Sudhir tms 320 f 2812
The document provides an introduction to the TMS320F2812 digital signal controller. It begins with definitions of common computing terms like microprocessor, microcontroller, digital signal processor, and digital signal controller. It then compares these terms. The document discusses the architecture of microprocessors, microcontrollers, and digital signal processors. It provides details on the features and architecture of the TMS320F2812, including its CPU, memory, peripherals, math units, and internal bus structure. It describes how the TMS320F2812 combines the processing power of a digital signal processor with memory and peripherals on a single chip.
Typical configuration of computer chapter 1
This document provides an overview of the typical configuration of a computer system. It begins with an introduction to computer hardware components like the motherboard, CPU, memory, and power supply. It then reviews the block diagram of a basic computer system, including the input, processing, storage, and output units. The remainder of the document focuses on describing the motherboard in more detail, including its types, components, and functions. It explains what a motherboard is, different motherboard form factors and chipsets, components like slots and ports, and the roles of the northbridge and southbridge chips.
More Related Content
What's hot
Lecture1 - Computer Architecture
This document provides an overview of computer architecture and microprocessors. It describes what a microprocessor is, its key design objectives of maximizing performance and productivity within constraints like power and area. It outlines the internal structure of a processor including the control unit, ALU, and register file. The document also discusses instruction set architecture, assembly code, types of instructions, encoding instructions into binary, and different number systems used.
Central processing unit
The CPU, or central processing unit, processes all information and instructions used by a computer to control its parts. It is made up of millions of tiny switches called transistors mounted on a silicon chip. The speed at which a CPU processes data is measured in megahertz or gigahertz, and processors are becoming faster, with one gigahertz equaling one billion cycles per second. The major manufacturers of CPUs for computers are Intel with its Pentium processors and AMD with its Athlon processors, although other companies like IBM also produce processors.
Choosing the right processor
The document discusses choosing the right processor for an application. It covers microprocessors, microcontrollers, DSP processors, FPGAs, CPLDs, hardware design flow, software design flow, and various embedded system design phases like simulation, evaluation and emulation. Key factors in processor selection include development tools, performance, cost, operating systems, hardware tools, peripherals and power consumption. The document also provides resources and websites for embedded system development.
Computerapplicationsnotesgrade6 120320153437-phpapp01
This document discusses different types of computers and their components. It describes mainframe, minicomputer, and microcomputers based on their size, cost, and data storage capacity. The four main parts of a computer are the input, output, memory, and central processing unit (CPU). The CPU consists of a control unit and arithmetic logic unit (ALU). Computer chips use integrated circuits to process digital or analog electrical signals. Memory includes random access memory (RAM) and read only memory (ROM). The document also defines other computer terms like bits, bytes, gigabytes, hardware, software, binary code, and ASCII code.
Lec02-CS110 Computational Engineering
This lecture discusses the history and evolution of computing hardware from early mechanical calculators and looms to modern computers. It describes Charles Babbage's analytical engine, considered the first general-purpose computer. The lecture outlines the development of hardware components like the CPU and memory and how early computers like ENIAC used vacuum tubes. It explains the basic structure of a computer as having a processor and memory, with programs stored as instructions and data. The lecture also introduces the concept of variables, data types, and how instructions operate on data through examples.
Components of the computer
A computer has four main functions: input, processing, output, and storage. It has five key components that enable these functions: the central processing unit (CPU), memory, input units, output units, and storage. The CPU contains the control unit which directs the flow of data and signals, and the arithmetic logic unit which performs basic math and logic operations.
Computer hardware
The document provides a brief history and overview of computer hardware. It discusses how computers have evolved from early machines like ENIAC built in the 1940s in the US to modern devices like the Macbook Pro now made in China. It defines a computer as an electronic machine that accepts input, processes it, and provides output which is stored for later use. The key components of computer hardware are then outlined, including the central processing unit, memory, storage, and input/output devices.
Introduction to Computer Architecture
The document provides an introduction to computer architecture. It discusses binary numbers and the bit and byte units used to measure digital information. It describes the major components of a computer system, including the central processing unit (CPU), memory, hard drives, and input/output components. The CPU functions are explained, including fetching and executing instructions through a cycle and using registers, caches, and memory in a hierarchy. Direct access memory like RAM is faster than sequential access storage like hard disks.
Embedded System-design technology
The document discusses design technology for embedded systems. It covers several key topics:
- There is a tradeoff between hardware and software implementation based on metrics like performance, power, size, and flexibility. Hardware and software design are now viewed together.
- Improving productivity involves automation through synthesis and reuse using predesigned components like processor cores. Verification ensures designs are correct and complete.
- Emulators can simulate systems faster than software simulation by mapping designs to FPGAs. This allows testing in real environments. Intellectual property cores provide predesigned processors and components for reuse.
Hardware (2)
This document discusses the key components of a computer system, including the central processing unit (CPU), memory (RAM), storage devices, graphics cards, expansion cards, and input/output devices. It describes the functions of the CPU, RAM, hard drives, optical drives, graphics cards and video connectors. It also covers factors like CPU clock speed, cores, RAM sizes, graphics card memory and processing units. The document is an introduction to basic computer hardware components and specifications.
Internal hardware
Internal hardware refers to the components inside a computer case that work together to process instructions and transfer data. This includes the CPU for running software, RAM for temporary data storage, ROM for startup instructions, a graphics card for displaying visuals, a motherboard connecting all parts, optional sound and network cards, and cooling fans to prevent overheating.
Central Processing Unit
The document discusses the history and components of the central processing unit (CPU). It describes how the CPU originated from concepts developed in the 1940s and evolved from large mainframe computers to smaller microprocessors. The key components of the CPU are the control unit, arithmetic logic unit, and memory unit. The CPU functions by fetching instructions from memory, decoding and translating them, executing calculations and data movement, and storing results.
Introduction of cpu
The document provides an introduction to microprocessors. It defines a microprocessor as the central processing unit (CPU) of a computer. The history section outlines some important early microprocessors, including the 4-bit Intel 4004 from 1971, the 8-bit Intel 8080 and 8085 from the 1970s, and the 32-bit Pentium from 1995. It also discusses more recent microprocessors like Intel's 64-bit Core series from 2007 and Haswell architecture. The document explains that a microprocessor is capable of arithmetic, logical operations through its arithmetic logic unit (ALU) and controls data flow between memory and peripherals through its control unit. It provides references for further information.
Microprocesser
A microprocessor is an integrated circuit that contains the functions of a central processing unit. It accepts digital input, processes it according to programmed instructions, and provides results as output. Early microprocessors from the 1970s included the Intel 4004, the world's first commercially available microprocessor. Modern microprocessors are used in a wide variety of applications from personal computers to embedded systems in devices like appliances and vehicles. They have transformed modern society through uses like computation, communication, and digital control.
Information Processing Cycle
This document discusses the key components of computer systems: input, processing, storage, and output. It lists common input devices like keyboards and mice that send data to computers. It describes processing as passing data through stages and the CPU as the component that performs operations. It defines output as any information sent from the computer via monitors, printers, or other devices. It also discusses storage devices like hard drives that hold processed data for future use.
Computer
This document summarizes computer hardware components. It divides hardware into three main groups: input devices, output devices, and the system unit. Input devices like keyboards and mice are used to enter data, while output devices like monitors and printers display or print data. The system unit contains the central processing unit and memory that process data, as well as peripheral components like the motherboard, hard disk drive, ports and power supply.
Computer hardware
Computer hardware are the physical parts or components of a computer, such as the central processing unit, monitor, keyboard, computer data storage, graphic card, sound card and motherboard.
Cpu presentation
The document discusses the CPU (central processing unit), which is the brain of the computer that carries out instructions. It describes the parts of the CPU including the socket and cooling assembly. The summary provides step-by-step instructions for removing an old CPU, installing a new CPU, applying thermal compound, and securing the cooling assembly.
Chapter 2: Computer Hardware (Revision)
This document provides an overview of the main components of a computer system. It describes how a computer takes in input, processes data, stores information, and produces output. Specifically, it defines input devices like keyboards and mice, the central processing unit and motherboard as the devices responsible for processing, storage devices like hard disks that save information, and output devices such as monitors, printers, and speakers. The learning objectives are to describe the hardware components of a computer, provide examples of devices that handle input, output, storage and processing tasks, and differentiate types of input and output devices.
Cpu
The CPU interprets instructions and performs logical and arithmetic operations to control the computer. It follows a machine cycle of fetching instructions from memory, decoding them, executing the operations, and storing results. The CPU consists of a control unit that manages resources and a machine cycle, and an ALU that performs arithmetic and logical functions according to the control unit's instructions.
What's hot (20)
Computerapplicationsnotesgrade6 120320153437-phpapp01
Computerapplicationsnotesgrade6 120320153437-phpapp01
Similar to Microprocessors:Types & Comparison of Microprocessors
Sudhir tms 320 f 2812
The document provides an introduction to the TMS320F2812 digital signal controller. It begins with definitions of common computing terms like microprocessor, microcontroller, digital signal processor, and digital signal controller. It then compares these terms. The document discusses the architecture of microprocessors, microcontrollers, and digital signal processors. It provides details on the features and architecture of the TMS320F2812, including its CPU, memory, peripherals, math units, and internal bus structure. It describes how the TMS320F2812 combines the processing power of a digital signal processor with memory and peripherals on a single chip.
Typical configuration of computer chapter 1
This document provides an overview of the typical configuration of a computer system. It begins with an introduction to computer hardware components like the motherboard, CPU, memory, and power supply. It then reviews the block diagram of a basic computer system, including the input, processing, storage, and output units. The remainder of the document focuses on describing the motherboard in more detail, including its types, components, and functions. It explains what a motherboard is, different motherboard form factors and chipsets, components like slots and ports, and the roles of the northbridge and southbridge chips.
Embedded Systems & Robotics
The document discusses embedded systems and robotics. It begins with an agenda that includes an introduction to embedded systems, embedded system components like microprocessors and microcontrollers, sensors, characteristics of embedded systems, and applications. It then discusses robotics, including why robotics are used, types of robots, and robot applications. Software and hardware used in embedded systems are also mentioned, including simulators, languages, and compilers.
The Computer
1026263522 PISCIOTTI GUERRA VANESSA CRISTINA
1023871028 RIVERA ALBA JHON EDISON
1012342376 RIVERA ZORRO NEIDY VIVIANA
1030531325 ROJAS ZAMBRANO JUAN MANUEL
Lec02
This document discusses computer architecture and pipelining. It begins with defining the differences between computer organization and architecture. It then outlines the components needed for a MIPS processor implementation including registers, ALU, register file, memory units, and control signals. The document analyzes pipeline hazards such as data, structural, and control hazards. It also evaluates pipeline performance based on clock period, cycles per instruction, and interrupt frequency.
Power point presentation3
The document discusses various components of a computer system. It describes the CPU and its role in executing programs and controlling instruction flow. It then discusses CPU errors and the recovery process. It explains memory, hard disk drives, CD-ROM drives, the motherboard and its various connections and components including the northbridge, southbridge, power supply, connectors, PCI slots, and DRAM memory slots. It provides details on the functions of these various computer hardware components.
Microcontroller from basic_to_advanced
The document discusses various topics related to embedded systems and microcontrollers including:
- Architectures like Von Neumann, Harvard and modified Harvard
- Types of microcontrollers like 8-bit, 16-bit and 32-bit
- Programming languages and IDEs used for embedded programming
- Common development boards and microcontrollers
- Memory types, buses, I/O and basic operation of microcontrollers
- Interfacing sensors and actuators to microcontrollers
CSC1100 - Chapter02 - Components of the System Unit
This document discusses the components of the system unit. It describes the central processing unit (CPU) which includes the control unit that directs operations and the arithmetic logic unit (ALU) that performs calculations. The CPU fetches instructions from memory and follows a machine cycle of fetch, decode, execute, and store. Caching and pipelining help improve processor speed. Memory temporarily stores instructions and data and comes in types like RAM, ROM, and flash memory. Expansion slots hold adapter cards to add functionality. Various ports allow connection to other devices.
Basics
The document defines and describes what a computer is, its components including hardware and software, different types of computers, and key parts and developments in computer history. A computer is an electronic device that can store, process, and retrieve data, and can be programmed with instructions. It is composed of hardware and software and exists in various sizes and configurations.
08. Central Processing Unit (CPU)
CPU - Central Processing Unit
-
Computer, Hardware, පරිගණක, දෘඩාංග, Information Technology, තොරතුරු තාක්ෂණය
:)
.........
The document defines a microprocessor as a small integrated circuit that functions as a digital data processor. It discusses the history and components of microprocessors, including the arithmetic logic unit, control unit, registers, and buses. It also covers characteristics like bandwidth, clock speed, and instruction sets. The document classifies processors and microprocessors and lists some common microprocessor producers.
Typical Configuration of Computer System
“Computer is an electronic machine that can store, recall and process data. It can perform
tasks or complex calculation according to a set of instructions or programs. The terms and definitions used in computer system
typical-configuration-of-computer.pdf
This document provides an overview of the typical configuration of a computer system. It discusses the main components including the input unit, central processing unit (CPU), memory unit, and output unit. The CPU contains the control unit and arithmetic logic unit. The memory unit includes both primary storage like RAM and secondary storage. The document then discusses the motherboard in more detail, including its components like the processor, BIOS, slots, disk controllers, ports, and bus. It describes the different types of motherboard including XT, AT, baby AT, and ATX. Finally, it discusses the primary and secondary memory in a computer system.
Computer Parts and their Functions .pptx
This document discusses the main components and functions of a computer system. It describes the monitor, keyboard, mouse, and other input devices. It then covers the major internal components of the system unit, including the motherboard, CPU, RAM, hard drive, optical drives, and ports. It provides details on motherboard components like sockets, slots, connectors and chipsets. Finally, it lists common computer hardware acronyms.
Fg a
This document provides a summary of key concepts related to IT hardware, including:
1) It discusses the electronic components of hardware like transistors, binary numbers, and character encoding that allow processing and storage of data.
2) It describes the major components of processing hardware like the CPU, memory, and how instructions are executed.
3) It outlines different types of input and output hardware devices that allow entering and displaying of data, as well as various storage options for large amounts of data.
Basic computer hardware and software
The document provides an overview of basic computer hardware and software. It describes the central processing unit as the "brain" of the computer and lists common brands of processors. It also discusses various input and output devices, data storage technologies like hard drives, CDs, floppy disks and flash drives. The document differentiates between system software like operating systems and utilities, and application software for tasks like word processing, spreadsheets, presentations and databases.
Unit i-introduction
The document provides an introduction to fundamentals of computer design. It discusses the evolution of computers from large room-sized machines to handheld devices. It outlines three main classes of computing - desktops, servers, and embedded systems - and highlights their key design considerations and performance metrics. The quantitative principles of computer design involve measuring execution time and its components, such as instruction count and clock cycles per instruction, to evaluate and compare performance.
lecture1-244.ppt
This course will discuss about the basic concepts of embedded system design, with particular emphasis on hands-on and demonstration sessions on system design using ARM microcontrollers. Keeping in view of the recent developments, this course will be based on state-of-the-art microcontroller boards and programming environments. This course will also help the participants to understand the developmental aspects of Internet of Things (IoT) based designs. Starting from the basics, the participants will be introduced to various interfacing issues with sensors and actuators. It is highly recommended that the participants procure some of the low cost microcontroller development boards and actually carry out the experiments that would be demonstrated.This course will discuss about the basic concepts of embedded system design, with particular emphasis on hands-on and demonstration sessions on system design using ARM microcontrollers. Keeping in view of the recent developments, this course will be based on state-of-the-art microcontroller boards and programming environments. This course will also help the participants to understand the developmental aspects of Internet of Things (IoT) based designs. Starting from the basics, the participants will be introduced to various interfacing issues with sensors and actuators. It is highly recommended that the participants procure some of the low cost microcontroller development boards and actually carry out the experiments that would be demonstrated.This course will discuss about the basic concepts of embedded system design, with particular emphasis on hands-on and demonstration sessions on system design using ARM microcontrollers. Keeping in view of the recent developments, this course will be based on state-of-the-art microcontroller boards and programming environments. This course will also help the participants to understand the developmental aspects of Internet of Things (IoT) based designs. Starting from the basics, the participants will be introduced to various interfacing issues with sensors and actuators. It is highly recommended that the participants procure some of the low cost microcontroller development boards and actually carry out the experiments that would be demonstrated.This course will discuss about the basic concepts of embedded system design, with particular emphasis on hands-on and demonstration sessions on system design using ARM microcontrollers. Keeping in view of the recent developments, this course will be based on state-of-the-art microcontroller boards and programming environments. This course will also help the participants to understand the developmental aspects of Internet of Things (IoT) based designs. Starting from the basics, the participants will be introduced to various interfacing issues with sensors and actuators. It is highly recommended that the participants procure some of the low cost microcontroller development boards and actually carry out the experiments that would be
Typical configuration of computer ppt
The document provides an overview of the typical configuration of a computer system. It describes the basic components of a computer including the input unit, central processing unit (CPU), memory unit, and output unit. The CPU consists of a control unit and arithmetic logic unit (ALU). The document then focuses on the motherboard, which contains the CPU, memory, expansion slots, and other electronic components. It discusses the characteristics, types, and components of motherboards such as the processor, BIOS, slots, disk controllers, ports, and power supply.
M&i(lec#01)
This document provides an overview of microprocessors, including their classification into RISC, CISC, and special processors. It describes the basic components and functioning of a microprocessor, and how RISC processors aim to simplify instructions while CISC processors minimize the number of instructions through more complex instructions. Special processors are designed for specific purposes like math coprocessors, I/O processors, transputers, and digital signal processors.
Similar to Microprocessors:Types & Comparison of Microprocessors (20)
CSC1100 - Chapter02 - Components of the System Unit
CSC1100 - Chapter02 - Components of the System Unit
Recently uploaded
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Recently uploaded (20)
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Microprocessors:Types & Comparison of Microprocessors
- 2. WHAT IS PROCESSOR?? Microprocessor is a controlling unit of a micro- computer, fabricated on a small silicon chip capable of performing ALU (Arithmetic Logical Unit) operations and communicating with the other devices connected to it. Microprocessor consists of an ALU, register array, and a control unit. ALU performs arithmetical and logical operations on the data received from the memory or an input device. Register array consists of registers identified by letters like B, C, D, E, H, L and accumulator. The control unit controls the flow of data and instructions within the computer.
- 3. BLOCK DIAGRAM OF A BASIC MICROCOMPUTER
- 4. DIFFERENT TYPES OF THE PROCESSORS Graphics Processing Unit (GPU): A dedicated graphics rendering device for a personal computer or game console Eg. NVIDIA TITAN X, ASUS graphic card, GeForce GTX graphic card etc Physics Processing Unit (PPU): A dedicated microprocessor designed to handle the calculations of physics Eg. Fluid dynamics, Collision Detection etc. Digital Signal Processor (DSP): A specialized microprocessor designed specifically for digital signal processing Eg. ARM cortex-A8 Network processor : A microprocessor specifically targeted at the networking application domain Eg. Routers, Network Switches, Transmitter
- 6. HOW MANY CPU MANUFACTURERS ARE THERE????
- 7. CPU MANUFACTURERS Intel AMD Qualcomm NVIDIA IBM Samsung Motorola Snapdragon Marvell Media Tek Rockchip Texas Instruments Cyrix Nexgen Rise Technology VIA Imagination Technologies
- 9. NOW WE COMPARE SOME PROCESSORS WITH EACH OTHER THE COMPARISON IS ACCORDING TO PASS MARK WEBSITE
- 17. QUIZ TIME Microprocessor consists of what? Ans: ALU, Register array, and a control unit
- 18. QUIZ TIME Register array consists of registers identified by which letters? Ans: B, C, D, E, H, L
- 19. The unit which controls the flow of data and instructions within the computer? Ans: Control Unit QUIZ TIME
- 20. QUIZ TIME The pins of Microprocessor are plated of which metal? Ans: Gold
- 21. QUIZ TIME What is in the image given below? Ans: Processor Socket
- 22. QUIZ TIME Full Form of TDP? Ans: Thermal
- 23. QUIZ TIME Full Form of GPU? Ans: Graphic Processing Unit
- 24. QUIZ TIME Full Form of NP? Ans: Network Processor
- 25. QUIZ TIME Microprocessor is fabricated on ______ chip? Ans: Silicon Chip
- 26. QUIZ TIME 4.0GHz represent _______? Ans: Clock speed/Sec of Microprocessor
- 27. QUIZ TIME GHz Stands for? Ans: Giga Heartz
- 28. QUIZ TIME Q3 2017 Represent in above table? Ans: July to September 2017