The document outlines the 5 step process of making paper from wood: 1) Preparation of wood by debarking logs and grinding them into pulp. 2) Cooking and boiling the wood chips in chemicals to extract the pulp. 3) Cleaning the pulp by filtering and beating it. 4) Pumping the pulp into machines to squeeze out water and form paper. 5) Drying, winding, and cutting the paper to the desired size for its final use.

1. PROCESS OF PAPER

2. Cellulose
Debarked
Pulp
Boiled
beaten

3. First step: Preparation of wood.
-The wood were obtained from the forest,
and through the trucks, are transfered to
the cellulose.
-In the cellulose , the wood were debarked
and in the mechanical process logs are
ground into pulp.

4. Second step: Cooking and boiled.
-In the chemical process, wood chips are cooked
in a chemical solution and boiled until pulp remains.
-In less quantity are obtained some
recyclable chemicals.

5. Third step: Cleaning.
-After the pulp has been filtered, it is beaten.
Various filler materials (Chlorine dioxide,
Oxygen, Peroxide and Caustic soda) are added.
-The dry pulp was cleaned and it depends
of the type of paper that we want.

6. Fourth step: Pulp to paper.
-The pulp is fed or pumped into giant, automated
machines.
-The pulp is squeezed through a series of rollers,
while suction devices are suctioning water until
the pulp has been completely dry.

7. Fifth step: Finishing.
- Finally, the dried paper is wound onto large reels,
where it will be further processed depending on
its ultimate use.
- Then the paper is cut to the desired size.