Prdz_resume_march16
•
1 like•144 views
Pedro O. Rodríguez Rivera is a mechanical engineer seeking a position that utilizes his experience in facility maintenance, regulatory compliance, equipment maintenance, process improvement, and project management. He holds active TS/SCI clearance and has a master's degree in manufacturing engineering with a 4.0 GPA. His experience includes developing maintenance schedules, quality control plans, standard operating procedures, and conducting audits and inspections to ensure regulatory compliance at both the VA and his current employer, Multi Air Services Engineers, Corp.
Report
Share
Report
Share
Download to read offline
Recommended
Jai kishore Tiwari resume
*Working as Sr.Executive in Mondelez India Foods Ltd. (Formerly Cadbury India Ltd.)
*6 years experience in operations and maintenance of Electrical & Instrumentation Discipline.
*Proficient in operations, maintenance, installation and commissioning of HV/ LV Power as well as control panels, Transformers,DG,UPS, motors, valves & Field Instruments.
*Proficient in microprocessor based control relays of Siemens/L & T/ Schneider.
*Planning for the design of MCC panels and programming panels.
*Planning for the installation of input devices(RTDs, level sensors, feedback switches, etc) and output devices(pneumatic actuators, variable frequency drives, valves, etc)
*Trouble shooting the problems during the installation and working of input and output instruments.
*Planned for preventive and predictive maintenance schedules of HT (upto 6600KW)/ LT motors, PCC, MCC & ACDB panels, Transformer, DG sets, compressors, UPS.
*Comprehensive understanding of electrical health and safety regulations.
Project qulaity initiative report
The document outlines several quality initiatives implemented by a project to improve project quality for offshore gas facilities. The key initiatives included developing a quality management dashboard to provide real-time status of major activities, implementing a schedule Q compliance matrix to map requirements and identify gaps, and developing a readiness matrix program to monitor pre-requisites for upcoming activities. Additional quality assurance assessments and weekly walkthroughs were also conducted to verify compliance. The initiatives helped ensure all activities started on schedule with full readiness, identified potential issues early to prevent delays, and aimed to deliver the facilities with zero punch points before sail away.
A Utility company in UK leverages Cigniti UAT expertise to reduce defects
The document discusses key requirements, challenges, and testing details for QA support on business intelligence dashboard and migration projects for a UK gas distribution company. It involves providing testing for SAP and Qlikview dashboards on desktops and tablets, running parallel sprints for different testing phases, and interacting with stakeholders in multiple locations. Testing includes test management and functional testing using the Qualify test tool. The solution improved test coverage, increased business user flexibility, effectively used the test management tool, rapidly fixed and retested defects, and reduced defects in production through robust testing processes.
Angel David Rodriguez - Resume
Electrical engineer with vast experience in energy conservation and utilities process equipment. Successful implementation of energy reduction initiatives and energy awareness program. Root cause analysis techniques to eliminate causal factors. Improve equipment reliability.
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Guidelines to Audit Validation Packages_RGA
This document provides guidelines for auditing and evaluating validation documentation as part of a remediation project. It outlines key activities and items to evaluate for validation and qualification documents, including worst case scenarios, critical parameters and limits, and calibration. An example process validation list and equipment qualification list are provided. General guidelines are given for validation and qualification documentation stages and content. Qualification stages for equipment, facilities, and utilities are described, including installation, operational, and performance qualification. Types of process validation including traditional, continuous, and hybrid are briefly outlined. References for further information are listed at the end.
ECSS-Q-ST-20C Supplier Responsibilities
The document outlines the objectives and principles of quality assurance (QA) management for space product assurance. The prime objective of QA is to ensure a QA program is established for projects covering mission definition, design, development and production. All QA requirements are specified through adequate methods and procedures. Personnel training is also addressed. The implementation of phase-independent activities like critical-item control and nonconformance control are ensured throughout projects. Design and verification, procurement, manufacturing, testing, and acceptance/delivery principles are defined to guide QA functions.
ECSS-Q-ST-10C Supplier vs PA Manager Responsibilities_formatted
This document provides a block matrix format overview of the ECSS-Q-ST-10C standard for space product assurance management. It outlines the relative responsibilities of the supplier and product assurance manager. Key responsibilities include establishing a product assurance plan, conducting audits and reviews, controlling non-conformances, managing configuration and documentation, and ensuring items meet requirements. The matrix highlights areas of shared and separate responsibility to clarify the product assurance management process defined by the standard.
Recommended
Jai kishore Tiwari resume
*Working as Sr.Executive in Mondelez India Foods Ltd. (Formerly Cadbury India Ltd.)
*6 years experience in operations and maintenance of Electrical & Instrumentation Discipline.
*Proficient in operations, maintenance, installation and commissioning of HV/ LV Power as well as control panels, Transformers,DG,UPS, motors, valves & Field Instruments.
*Proficient in microprocessor based control relays of Siemens/L & T/ Schneider.
*Planning for the design of MCC panels and programming panels.
*Planning for the installation of input devices(RTDs, level sensors, feedback switches, etc) and output devices(pneumatic actuators, variable frequency drives, valves, etc)
*Trouble shooting the problems during the installation and working of input and output instruments.
*Planned for preventive and predictive maintenance schedules of HT (upto 6600KW)/ LT motors, PCC, MCC & ACDB panels, Transformer, DG sets, compressors, UPS.
*Comprehensive understanding of electrical health and safety regulations.
Project qulaity initiative report
The document outlines several quality initiatives implemented by a project to improve project quality for offshore gas facilities. The key initiatives included developing a quality management dashboard to provide real-time status of major activities, implementing a schedule Q compliance matrix to map requirements and identify gaps, and developing a readiness matrix program to monitor pre-requisites for upcoming activities. Additional quality assurance assessments and weekly walkthroughs were also conducted to verify compliance. The initiatives helped ensure all activities started on schedule with full readiness, identified potential issues early to prevent delays, and aimed to deliver the facilities with zero punch points before sail away.
A Utility company in UK leverages Cigniti UAT expertise to reduce defects
The document discusses key requirements, challenges, and testing details for QA support on business intelligence dashboard and migration projects for a UK gas distribution company. It involves providing testing for SAP and Qlikview dashboards on desktops and tablets, running parallel sprints for different testing phases, and interacting with stakeholders in multiple locations. Testing includes test management and functional testing using the Qualify test tool. The solution improved test coverage, increased business user flexibility, effectively used the test management tool, rapidly fixed and retested defects, and reduced defects in production through robust testing processes.
Angel David Rodriguez - Resume
Electrical engineer with vast experience in energy conservation and utilities process equipment. Successful implementation of energy reduction initiatives and energy awareness program. Root cause analysis techniques to eliminate causal factors. Improve equipment reliability.
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Guidelines to Audit Validation Packages_RGA
This document provides guidelines for auditing and evaluating validation documentation as part of a remediation project. It outlines key activities and items to evaluate for validation and qualification documents, including worst case scenarios, critical parameters and limits, and calibration. An example process validation list and equipment qualification list are provided. General guidelines are given for validation and qualification documentation stages and content. Qualification stages for equipment, facilities, and utilities are described, including installation, operational, and performance qualification. Types of process validation including traditional, continuous, and hybrid are briefly outlined. References for further information are listed at the end.
ECSS-Q-ST-20C Supplier Responsibilities
The document outlines the objectives and principles of quality assurance (QA) management for space product assurance. The prime objective of QA is to ensure a QA program is established for projects covering mission definition, design, development and production. All QA requirements are specified through adequate methods and procedures. Personnel training is also addressed. The implementation of phase-independent activities like critical-item control and nonconformance control are ensured throughout projects. Design and verification, procurement, manufacturing, testing, and acceptance/delivery principles are defined to guide QA functions.
ECSS-Q-ST-10C Supplier vs PA Manager Responsibilities_formatted
This document provides a block matrix format overview of the ECSS-Q-ST-10C standard for space product assurance management. It outlines the relative responsibilities of the supplier and product assurance manager. Key responsibilities include establishing a product assurance plan, conducting audits and reviews, controlling non-conformances, managing configuration and documentation, and ensuring items meet requirements. The matrix highlights areas of shared and separate responsibility to clarify the product assurance management process defined by the standard.
Angelica Estrada Resume
Angelica Estrada Lugo has over 20 years of experience as a lead engineer and product/process engineer applying mechanical engineering and Six Sigma expertise. She has a proven track record of improving product performance, production capacity, and achieving cost reductions through failure analysis and process improvements. Her experience includes managing mechanical testing laboratories, ensuring regulatory compliance, validating new products, analyzing customer complaints, and implementing quality programs.
Resume - Purushoth
PURUSHOTH S has over 7 years of experience in quality assurance. He is a certified internal auditor for TS16949 with expertise in quality processes like APQP, PPAP, MSA, SPC, and FMEA. Currently working as a senior engineer for quality assurance and management systems at Modine Thermal Systems, his responsibilities include managing third party certifications, conducting internal audits, and resolving supplier issues. Previously he has helped reduce part issues, lot rejections, and line stoppages at other automotive companies.
Vladimir Nikitin - Completed CV
Vladimir Nikitin is a Russian instrumentation professional seeking a position as an Instruments Engineer or Supervisor. He has over 20 years of experience in instrumentation, maintenance, repair, and project management. His strengths include motivating teams, effective communication, analyzing technical problems, and building long-lasting relationships. Nikitin holds degrees in finance and instrumentation engineering and certifications in safety rules. He is proficient in instrumentation, automation, programming, and systems maintenance.
PCAPP Update 28 May 2014
PCAPP Update 28 May 2014Program Executive Office, Assembled Chemical Weapons Alternatives (PEO ACWA)
Presented to:
Citizens’ Advisory Commission
Presented by:
Paul Dent
Operational Readiness Review (ORR) ManagerValue Stream Map
The document describes the current and future state of process audits and product inspections at a company. In the current state, a quality assurance specialist performs daily inspections and records data but does no trend analysis or inspection of equipment or training. In the future state, the specialist will perform both daily product audits and monthly process audits. They will inspect equipment, training, and perform trend analysis on the audit data to prepare monthly reports.
Jake Essig FDA QA Engineer - 3May2016
Jake Essig has over 15 years of experience in quality engineering roles in the medical device industry. He has worked across the product lifecycle from new product development through post-market activities. His experience includes processes such as risk analysis, design validation, manufacturing process validation, complaint handling, and ensuring compliance with regulations. He is proficient in quality management systems and has a Six Sigma Green Belt certification.
Operations Supervisor Oil Wells
The document is a resume for Carlos Manuel Cruz Cuervo, an operations supervisor with over 11 years of experience in oil well operations. Some of his key qualifications and achievements include reducing non-productive time by 95.5% in two months at a previous role with Weatherford, and implementing strategies that increased efficiencies and reduced costs. He is seeking new opportunities where he can utilize his leadership skills and technical expertise in oil well tools and pipelines.
ETI Wastewater Consulting Presentation
At Effluent Treatment Innovations our Wastewater Treatment Consultancy Service approaches wastewater treatment through a unique process of Risk Assessment from the water source to the effluent discharge and then provides the client with a detailed Risk Management Plan to reach and maintain consistent discharge Compliance.
How to optimize ddc systems to save energy in hospitals
Hospitals and health care facilities are under increasing pressure to save costs by improving their energy performance. Implementing a plan to check, correct, and optimize their facility Direct Digital Control (DDC) systems can generate significant energy savings for very little cost.
This webinar, presented by Pulse Energy and Nancy Myers, Energy Manager for the Vancouver Island Health Authority (VIHA), was on generating savings in health care facilities DDC system optimization. Nancy’s presentation covered:
- her team's plan and process for investigating and optimizing DDC systems
- examples of energy wasting problems that can occur in hospital DDCs
- an action plan to maintain the savings going forward
GMP-QA
QA is responsible for overseeing and approving key quality documents and processes. This includes standard operating procedures, layouts, formats, deviations, changes, complaints, recalls, training programs, medical examinations, validations, qualifications, audits, and vendor management. QA ensures compliance and implements corrective actions when needed. All quality related documents and records must be properly approved, controlled, and retained by QA.
Devin Gavin Summer Intern
Devin Gavin presented on their work with maintenance strategy and failure analysis at PHI over the summer of 2014. This included monitoring a dissolved gas analysis project, conducting failure analysis fieldwork and reporting, and updating a maintenance strategy database. Key activities involved inspecting equipment after storms, preparing transformer teardown reports, and compiling substation inspection reports. Through these efforts, failures were recorded and databases were updated to analyze and improve reliability. Gavin also gained experience in power systems, electric equipment, safety practices, and the importance of maintenance and failure analysis.
Risk assessment for computer system validation
A risk assessment is a process to identify potential hazards and analyze what could happen if a hazard occurs.
Computer system validation (sometimes called computer validation or CSV) is the process of documenting that a computer system meets a set of defined system requirements.
Energy efficiency services by Greenleaf
Greenleaf Green Solutions is an energy consulting firm that helps clients improve energy efficiency and reduce costs through audits, modeling, and management systems. They have experts across engineering, energy, finance, and management who develop customized solutions. Their process involves comprehensive audits to identify savings opportunities, modeling to estimate performance and costs, and an energy management system to implement recommendations and achieve certification. Their goal is to deliver simplified and cost-effective ways for clients to save on energy.
Seismic Supervisor- Position available
Altea Resources plans to conduct a 2D seismic survey in Algeria and will hire a Seismic Supervisor. The Supervisor's responsibilities include ensuring equipment is functioning properly, acquisition parameters are followed, safety standards are met, production and cost figures are accurate, and comprehensive reports on performance and any issues are submitted. Qualifications for Supervisor include at least 5 years of experience as a supervisor for land seismic operations, a BSc in Geophysics or related field, experience with various seismic techniques and equipment, fluency in English, and meeting medical requirements.
resume 5.4
Gary Mackay is a highly skilled test technician with 20 years of experience in diverse projects involving technical systems, devices, computers, and equipment. He has strong problem solving and communication skills. His background includes roles as an electro-mechanical technician, optical test technician, lead electromechanical technician, and senior laser test technician. He has experience diagnosing, testing, repairing, and maintaining various medical, automation, laser, and electromechanical systems.
John Mark Willoughby Resume
John Mark Willoughby has over 15 years of experience in quality assurance and inspection roles. He is currently a Lead Quality Assurance Inspector at Aker Solutions, where he is responsible for quality-related items and inspections for subsea distribution equipment. Previously, he held quality technician and inspector roles at Norwood Medical and Oceaneering International, where he performed inspections, developed inspection procedures, and implemented quality processes. He has certifications in ISO standards, lean manufacturing, and inspection equipment operation.
Energy Assessment and Audit
REC Group specializes in Energy Consultancy. We carry
out extensive evaluations of existing infrastructure and
all the important parameters in order to offer a viable
and effective solution to our clients.
An approach on pharmaceuticals qualification
This document discusses the importance and requirements of qualification for pharmaceutical equipment. Qualification ensures equipment is properly installed and functions as intended to maintain quality standards. It involves documented verification that equipment meets design specifications and user requirements through various stages from design to operation. Key segments of qualification discussed include users requirement specification, design qualification, factory acceptance testing, installation qualification, operational qualification, and performance qualification.
Rex Serrano - Quality Expert5CMC
Rex Serrano Morales has over 25 years of experience in quality assurance, regulatory compliance, and validation for pharmaceutical and chemical manufacturing. He has worked for major companies like Amgen, Merck, and Procter & Gamble in roles managing quality, compliance, validations, audits, and regulatory submissions. He is a licensed chemist with expertise in GMP standards, change control, computer validation, investigations, and regulatory inspections.
CV Johan 3
This CV summarizes the qualifications and extensive experience of Johannes Badenhorst in various maintenance, management, and safety roles. He has qualifications in electrical engineering as well as a business degree. His experience includes positions as a maintenance electrician, electrical contractor, millwright, maintenance manager, project manager, factory manager, and site safety officer. He has experience across various industries including manufacturing, mining, and food processing.
JHOCKMAN RESUME 2016 DEC
Jeremiah Hockman has over 5 years of experience in operational and contingency intelligence production. He has strong skills in geospatial analysis using software such as ArcGIS, Google Earth, and Adobe Acrobat. Currently he is an intelligence analyst for the FBI's Foreign Terrorist Tracking Task Force, where he independently analyzes information from various sources to produce clear analytical reports. Previously he was an intelligence specialist in the US Navy, where he produced route studies, evacuation plans, and contingency reports analyzing cultural and atmospheric conditions in target areas. He has received awards including a Certificate of Appreciation from EUCOM in 2016 and a Joint Service Achievement Medal in 2014.
2015_Resume_Sorrentino Ludwig
Mr. Sorrentino has over 50 years of experience in technical program and project management for the DoD and DoN, including service as a USN officer from 1971-1991 with experience in surface warfare, special forces, and engineering duties. Since retiring from the military in 1991, he has held several senior engineering and management positions providing expertise to weapons programs for the USN, USAF, USMC, and foreign partners. He has extensive experience in systems safety engineering for programs such as F-35, C-130, Virginia-class submarines, and EFV.
More Related Content
What's hot
Angelica Estrada Resume
Angelica Estrada Lugo has over 20 years of experience as a lead engineer and product/process engineer applying mechanical engineering and Six Sigma expertise. She has a proven track record of improving product performance, production capacity, and achieving cost reductions through failure analysis and process improvements. Her experience includes managing mechanical testing laboratories, ensuring regulatory compliance, validating new products, analyzing customer complaints, and implementing quality programs.
Resume - Purushoth
PURUSHOTH S has over 7 years of experience in quality assurance. He is a certified internal auditor for TS16949 with expertise in quality processes like APQP, PPAP, MSA, SPC, and FMEA. Currently working as a senior engineer for quality assurance and management systems at Modine Thermal Systems, his responsibilities include managing third party certifications, conducting internal audits, and resolving supplier issues. Previously he has helped reduce part issues, lot rejections, and line stoppages at other automotive companies.
Vladimir Nikitin - Completed CV
Vladimir Nikitin is a Russian instrumentation professional seeking a position as an Instruments Engineer or Supervisor. He has over 20 years of experience in instrumentation, maintenance, repair, and project management. His strengths include motivating teams, effective communication, analyzing technical problems, and building long-lasting relationships. Nikitin holds degrees in finance and instrumentation engineering and certifications in safety rules. He is proficient in instrumentation, automation, programming, and systems maintenance.
PCAPP Update 28 May 2014
PCAPP Update 28 May 2014Program Executive Office, Assembled Chemical Weapons Alternatives (PEO ACWA)
Presented to:
Citizens’ Advisory Commission
Presented by:
Paul Dent
Operational Readiness Review (ORR) ManagerValue Stream Map
The document describes the current and future state of process audits and product inspections at a company. In the current state, a quality assurance specialist performs daily inspections and records data but does no trend analysis or inspection of equipment or training. In the future state, the specialist will perform both daily product audits and monthly process audits. They will inspect equipment, training, and perform trend analysis on the audit data to prepare monthly reports.
Jake Essig FDA QA Engineer - 3May2016
Jake Essig has over 15 years of experience in quality engineering roles in the medical device industry. He has worked across the product lifecycle from new product development through post-market activities. His experience includes processes such as risk analysis, design validation, manufacturing process validation, complaint handling, and ensuring compliance with regulations. He is proficient in quality management systems and has a Six Sigma Green Belt certification.
Operations Supervisor Oil Wells
The document is a resume for Carlos Manuel Cruz Cuervo, an operations supervisor with over 11 years of experience in oil well operations. Some of his key qualifications and achievements include reducing non-productive time by 95.5% in two months at a previous role with Weatherford, and implementing strategies that increased efficiencies and reduced costs. He is seeking new opportunities where he can utilize his leadership skills and technical expertise in oil well tools and pipelines.
ETI Wastewater Consulting Presentation
At Effluent Treatment Innovations our Wastewater Treatment Consultancy Service approaches wastewater treatment through a unique process of Risk Assessment from the water source to the effluent discharge and then provides the client with a detailed Risk Management Plan to reach and maintain consistent discharge Compliance.
How to optimize ddc systems to save energy in hospitals
Hospitals and health care facilities are under increasing pressure to save costs by improving their energy performance. Implementing a plan to check, correct, and optimize their facility Direct Digital Control (DDC) systems can generate significant energy savings for very little cost.
This webinar, presented by Pulse Energy and Nancy Myers, Energy Manager for the Vancouver Island Health Authority (VIHA), was on generating savings in health care facilities DDC system optimization. Nancy’s presentation covered:
- her team's plan and process for investigating and optimizing DDC systems
- examples of energy wasting problems that can occur in hospital DDCs
- an action plan to maintain the savings going forward
GMP-QA
QA is responsible for overseeing and approving key quality documents and processes. This includes standard operating procedures, layouts, formats, deviations, changes, complaints, recalls, training programs, medical examinations, validations, qualifications, audits, and vendor management. QA ensures compliance and implements corrective actions when needed. All quality related documents and records must be properly approved, controlled, and retained by QA.
Devin Gavin Summer Intern
Devin Gavin presented on their work with maintenance strategy and failure analysis at PHI over the summer of 2014. This included monitoring a dissolved gas analysis project, conducting failure analysis fieldwork and reporting, and updating a maintenance strategy database. Key activities involved inspecting equipment after storms, preparing transformer teardown reports, and compiling substation inspection reports. Through these efforts, failures were recorded and databases were updated to analyze and improve reliability. Gavin also gained experience in power systems, electric equipment, safety practices, and the importance of maintenance and failure analysis.
Risk assessment for computer system validation
A risk assessment is a process to identify potential hazards and analyze what could happen if a hazard occurs.
Computer system validation (sometimes called computer validation or CSV) is the process of documenting that a computer system meets a set of defined system requirements.
Energy efficiency services by Greenleaf
Greenleaf Green Solutions is an energy consulting firm that helps clients improve energy efficiency and reduce costs through audits, modeling, and management systems. They have experts across engineering, energy, finance, and management who develop customized solutions. Their process involves comprehensive audits to identify savings opportunities, modeling to estimate performance and costs, and an energy management system to implement recommendations and achieve certification. Their goal is to deliver simplified and cost-effective ways for clients to save on energy.
Seismic Supervisor- Position available
Altea Resources plans to conduct a 2D seismic survey in Algeria and will hire a Seismic Supervisor. The Supervisor's responsibilities include ensuring equipment is functioning properly, acquisition parameters are followed, safety standards are met, production and cost figures are accurate, and comprehensive reports on performance and any issues are submitted. Qualifications for Supervisor include at least 5 years of experience as a supervisor for land seismic operations, a BSc in Geophysics or related field, experience with various seismic techniques and equipment, fluency in English, and meeting medical requirements.
resume 5.4
Gary Mackay is a highly skilled test technician with 20 years of experience in diverse projects involving technical systems, devices, computers, and equipment. He has strong problem solving and communication skills. His background includes roles as an electro-mechanical technician, optical test technician, lead electromechanical technician, and senior laser test technician. He has experience diagnosing, testing, repairing, and maintaining various medical, automation, laser, and electromechanical systems.
John Mark Willoughby Resume
John Mark Willoughby has over 15 years of experience in quality assurance and inspection roles. He is currently a Lead Quality Assurance Inspector at Aker Solutions, where he is responsible for quality-related items and inspections for subsea distribution equipment. Previously, he held quality technician and inspector roles at Norwood Medical and Oceaneering International, where he performed inspections, developed inspection procedures, and implemented quality processes. He has certifications in ISO standards, lean manufacturing, and inspection equipment operation.
Energy Assessment and Audit
REC Group specializes in Energy Consultancy. We carry
out extensive evaluations of existing infrastructure and
all the important parameters in order to offer a viable
and effective solution to our clients.
An approach on pharmaceuticals qualification
This document discusses the importance and requirements of qualification for pharmaceutical equipment. Qualification ensures equipment is properly installed and functions as intended to maintain quality standards. It involves documented verification that equipment meets design specifications and user requirements through various stages from design to operation. Key segments of qualification discussed include users requirement specification, design qualification, factory acceptance testing, installation qualification, operational qualification, and performance qualification.
Rex Serrano - Quality Expert5CMC
Rex Serrano Morales has over 25 years of experience in quality assurance, regulatory compliance, and validation for pharmaceutical and chemical manufacturing. He has worked for major companies like Amgen, Merck, and Procter & Gamble in roles managing quality, compliance, validations, audits, and regulatory submissions. He is a licensed chemist with expertise in GMP standards, change control, computer validation, investigations, and regulatory inspections.
CV Johan 3
This CV summarizes the qualifications and extensive experience of Johannes Badenhorst in various maintenance, management, and safety roles. He has qualifications in electrical engineering as well as a business degree. His experience includes positions as a maintenance electrician, electrical contractor, millwright, maintenance manager, project manager, factory manager, and site safety officer. He has experience across various industries including manufacturing, mining, and food processing.
What's hot (20)
How to optimize ddc systems to save energy in hospitals
How to optimize ddc systems to save energy in hospitals
Viewers also liked
JHOCKMAN RESUME 2016 DEC
Jeremiah Hockman has over 5 years of experience in operational and contingency intelligence production. He has strong skills in geospatial analysis using software such as ArcGIS, Google Earth, and Adobe Acrobat. Currently he is an intelligence analyst for the FBI's Foreign Terrorist Tracking Task Force, where he independently analyzes information from various sources to produce clear analytical reports. Previously he was an intelligence specialist in the US Navy, where he produced route studies, evacuation plans, and contingency reports analyzing cultural and atmospheric conditions in target areas. He has received awards including a Certificate of Appreciation from EUCOM in 2016 and a Joint Service Achievement Medal in 2014.
2015_Resume_Sorrentino Ludwig
Mr. Sorrentino has over 50 years of experience in technical program and project management for the DoD and DoN, including service as a USN officer from 1971-1991 with experience in surface warfare, special forces, and engineering duties. Since retiring from the military in 1991, he has held several senior engineering and management positions providing expertise to weapons programs for the USN, USAF, USMC, and foreign partners. He has extensive experience in systems safety engineering for programs such as F-35, C-130, Virginia-class submarines, and EFV.
resume_2_June_15
This document provides a summary of qualifications and experience for Jesse Pinero, including his training in GIS systems through the US Army and National Geospatial Intelligence Agency, his active top secret security clearance, and his extensive experience using mapping software and producing mapping products. Pinero has over 10 years of experience as a geospatial engineer and senior analyst, leading teams and training others. He is currently pursuing a degree in Geospatial Information Systems.
Resume
Timothy Poss is a transitioning military service member seeking a position in information technology. He has 6 years of experience performing local and network administration, communications security, and monitoring secure and nonsecure networks including the Defense Red Switch Network supporting the White House Communications Agency. Poss' duties included installing, maintaining, and managing inter-agency phone, internet, and radio networks for the President, Vice President, and presidential staff. He also prepared daily and emergency updates, provided physical security for over 10,000 sensitive items, and trained staff. Poss holds a TS/SCI clearance and certifications in COMSEC custodian training, local COMSEC management software, CompTIA Network+, and CompTIA Security+.
Terry Lee Evans Resume 9-2015
Terry Evans is seeking a position that allows him/her to utilize strong teamwork and communication skills to support management. He/She has over 10 years of experience managing offices and coordinating travel for senior Department of Defense officials. His/Her experience includes overseeing agendas, correspondence, security clearances, and budgeting for offices supporting policies in Europe and special operations.
Jenkins_Joshua Resume 2016
Joshua Jenkins has over 10 years of experience in project management, radar engineering, C4I systems, communications systems, and software development. He currently works as a project manager and lead technical advisor for Riverside Research, providing support to government agencies in radar systems, C4I, communications, and analysis. Prior to his current role, he worked as a research engineer at the University of New Hampshire where he designed systems for radio wave data collection and analysis.
Sunny Patel Resume 2016
This document is a resume for Sunny Patel. It summarizes their experience as an IT leader and systems engineer with over 10 years of experience in technology roles. They have held various management and technical roles at companies like Computer Sciences Corporation, Lockheed Martin, and Southern Methodist University. Their skills include program management, systems engineering, Oracle, SAP, XML, and Agile methodologies. The resume highlights accomplishments like receiving awards for exceeding expectations and improving processes to achieve cost savings and efficiency.
John Michael Rzepkowski Resume Oct2015
This document provides a summary of John "Michael" Rzepkowski's professional experience, including over 26 years of experience as a network systems administrator, engineer, and technical lead. He has supported numerous customers using various operating systems and software. Currently, he is the integration technical lead supporting all Booz Allen SCIF spaces in Northern Virginia.
Biga_8_9_16
James E. Biga has over 20 years of experience in logistics engineering and program management for space situational awareness and missile defense programs. He currently performs testing and evaluation of new OPIR systems at Falcon Shield in support of the JRDC contract. Previously, he served as the logistics/deployment lead for several space situational awareness programs, developing requirements documentation and overseeing system deployments. He has also held positions as a field engineer, depot manager, and assistant training manager on programs such as JTAGS, SBIRS, and ALERT.
SHAW CV 7-7-15
Wesley Shaw is seeking a transition from his current role as a Systems Engineer at NSWC Dahlgren Division to the private sector to advance his career in Materials and Systems Engineering. He has over 15 years of experience in materials characterization, mechanical testing, system development, and program management for energetic systems. His education includes a M.S. in Energetics and a B.S. in Materials Science and Engineering.
Torben Verdich Resume TS-SCI
This document is a resume for Torben Verdich, detailing his 20 years of experience in IT systems architecture, project management, and technical support. Some of the key experiences mentioned include managing upgrades to virtualize servers and encrypt hard drives for the FBI, software account management for the NGA, and leading engineering projects involving VMware, SCOM, and BigFix for various other government organizations. The resume emphasizes Verdich's leadership skills and experience with a wide range of technologies, platforms, and vendor products.
Bavel 012916
Robert Avel, MCSA
IT System Engineer/Windows Administrator
Top Secret TS/SCI Clearance with FS Lifestyle Polygraph
Viewers also liked (12)
Similar to Prdz_resume_march16
resume luis lopez
Luis Alfonso Lopez Castillo is seeking a quality engineering position where he can apply his skills in manufacturing processes, problem solving, and continuous improvement. He has over 10 years of experience in quality engineering roles focused on reducing defects, validating new products and equipment, implementing quality tools, and ensuring on-time delivery. His experience spans several industries including medical devices, automotive, and electronics manufacturing.
resumegfp_2016
Guillermo Fernandez has over 15 years of experience in quality management and production management. He holds a Master's degree in Metallurgical and Materials Engineering and a Bachelor's degree in the same field. He is currently the Quality Manager at TMK IPSCO, where he oversees quality assurance programs and processes. Prior to this role, he held production management and engineering positions at various steel and pipe manufacturing companies.
Bhattacharyya_Keya-Elec.Eng
Keya Bhattacharyya is an electrical engineer with over 25 years of experience in diverse industries including aerospace, automotive, medical, and consumer products. She has a strong track record of driving technical development, quality assurance, process improvement, and team leadership. Her experience includes roles in engineering, quality, manufacturing, and project management. She is proficient in various standards and processes including ISO, FDA, Lean, and Six Sigma.
CV D. Maimbolwa
Maimbolwa David Muhau has over 20 years of experience in reliability engineering and maintenance management. He has worked in various roles optimizing asset performance and maintenance practices in the mining industry. Some of his responsibilities have included developing maintenance strategies, procedures, and schedules to improve reliability. He is also experienced in planning and executing projects to address equipment issues and improve plant performance. Maimbolwa has strong skills in computerized maintenance management systems and reliability engineering techniques.
Doug Cruz_Resume_2016
Douglas Cruz-Alvarez has over 15 years of experience in aerospace quality assurance and engineering management. He is currently the Site Quality Manager at UTC Aerospace Systems in Albuquerque, NM, where he has reorganized teams, improved processes, and driven cultural changes. Previously, he held quality leadership roles at Honeywell and Bogue Machine Company, implementing quality management systems, achieving certifications, and improving metrics like cost of poor quality, supplier performance, and customer satisfaction.
karthik 123
Karthik is seeking a challenging engineering position offering career growth. He has over 5 years of experience in quality assurance roles. His experience includes supporting process implementation, auditing work products, identifying process improvements, and ensuring metrics-based project management at Tech Mahindra. Previously at Suzlon Energy, he led quality improvement projects, performed root cause analysis, and ensured legal compliance certification. Karthik holds a Bachelor's degree in Mechanical Engineering.
Burant, Larry resume 01_2014
Lawrence Burant has over 30 years of experience in statistical engineering, quality assurance, and continuous improvement. He has a background in various industries including aerospace, automotive, medical devices, and industrial automation. Burant holds multiple certifications including Six Sigma Black Belt, Certified Quality Engineer, and Certified Lead Auditor for ISO and AS standards. Throughout his career, he has spearheaded numerous projects that resulted in improved quality, increased yields, reduced costs and failures, and enhanced customer satisfaction.
Thiruchelvan K
Thiruchelvan K is seeking a position that allows him to utilize his experience in quality assurance and engineering. He has over 15 years of experience in roles of increasing responsibility at electronics manufacturing companies. His experience includes quality control, process improvement, supplier management, auditing, and training. He is proficient in quality methodologies like ISO, APQP, FMEA, SPC, and has certifications in Six Sigma and VDA auditing.
Faruk_Syed_Engineer
- Over 15 years of experience in quality engineering, project management, and manufacturing engineering with a focus on electronics, electrical systems, medical devices, and telecommunications.
- Extensive experience leading quality initiatives, audits, product development, and supplier quality to improve business performance, customer satisfaction, and compliance with standards.
- Holds multiple certifications in quality engineering, Lean Six Sigma, auditing, medical devices, electronics manufacturing, and Agile project management.
- Education includes a master's degree in project management and bachelor's degrees in electrical engineering.
Dulan_Resume_QE
Robert Dulan is an ASQ Certified Six Sigma Black Belt and Project Management Professional (PMP) with over 25 years of experience in quality management, new product development, and process improvement. He has held quality engineering and management roles at several companies, successfully leading teams and projects that have saved companies millions of dollars. His experience includes statistical analysis, design of experiments, auditing quality systems, and managing supplier quality to reduce defects.
Resume of Richard K Metzner-2016
- Richard K. Metzner has over 20 years of experience in quality systems for the automotive, commercial, and electrical industries including extensive experience with QS 9000, ISO, and TS16949 standards.
- He has held roles such as supplier quality engineer, plant quality manager, and quality engineer where he implemented quality systems and ensured compliance to standards.
- Metzner has expertise in all phases of quality including auditing suppliers, approving production parts submissions, monitoring production quality, and training employees.
Lynch_Mark
Mark Lynch has over 25 years of experience in quality, health, safety, and environmental management. He has held roles such as Quality Manager, Safety Manager, VP of QHSE, and Regional QHSE Manager. He has implemented quality management systems, integrated management systems, and safety programs for various industries. He is skilled in standards such as ISO 9001, OHSAS 18001, ISO 14001, and API Q1.
Rajesh mba resume - dubai
R. Rajesh Kumar has over 5 years of experience in quality control, working as a Senior Engineer focusing on inline quality and supplier quality at IHD Industries. He has a background in electrical engineering and has skills in quality tools, audit preparation, supplier development, and ERP implementation to track quality performance. His career achievements include implementing connectivity checkers to reduce defects and reducing costs by monitoring destructive testing.
Joe bartnickiresume jun4-2016
Joseph Bartnicki has over 25 years of experience in quality management for telecommunications and electronics manufacturing companies. He has a proven track record of implementing quality systems that increase profitability through quality improvement and customer satisfaction. Currently he is a Senior Quality Manager at ZTE USA responsible for quality on several large customer accounts and leading teams to attain number one supplier status.
Kevin Resume 11-2-2015
Kevin Moss has over 29 years of experience in quality engineering and management positions, including serving as Quality Director for Powerteq where he improved warranty costs from 25% to 2%. He also has experience as the owner of a manufacturing company where he established ISO and military compliant quality systems. Moss has a background in electronics technician work from his time in the Navy and holds multiple certifications in quality control, leadership, and computer programs.
Adriana Rivera Figueroa RESUME
Adriana Rivera Figueroa is seeking a position in aerospace engineering, renewable energy, or potable water systems. She has a Bachelor's degree in Mechanical Engineering and several technical certifications. Her experience includes over 3 years in facility maintenance, project management, quality auditing, and CMMS administration for Hewlett Packard in Puerto Rico and Berrios Engineering. She is bilingual in English and Spanish.
Tom Mikols Resume
Thomas Mikols has over 30 years of experience in engineering and project management. He is proficient in maintenance strategies to control costs and downtime. As a Process and Reliability Engineer, he created standard work procedures and PM programs that increased uptime above 95% and saved $400,000 annually. He has extensive experience managing day-to-day operations and continuous improvement activities across multiple crafts.
Nilesh More_Project Manager
Nilesh Ravindra More is seeking a career in a growth-oriented organization where he can fully utilize his commitment and expertise. He has a B.E. in Electrical Engineering and experience as a Project Manager and Senior Engineer in fire safety and building automation systems. Currently working as Project Manager at Douse Fire Systems Pvt. Ltd., his responsibilities include quality control, project coordination, risk management, and ensuring projects are completed on time and on budget. He has successfully managed projects for companies like Honda, Maruti Suzuki, and Vodafone.
Walid Saliba resume 2015
Walid Saliba has over 15 years of experience in quality and manufacturing engineering. He has a strong background in mechanical and electrical systems as well as expertise in Six Sigma, quality control, and lean manufacturing. His experience includes roles in process engineering, quality control, and maintenance at several solar and medical device companies. He maintains multilingual skills and certification in various quality standards.
Lynch mark
Mark Lynch has over 25 years of experience in quality assurance, health, safety, and environmental management roles. He has worked in various industries including manufacturing, oil and gas, and rail. Some of his responsibilities have included implementing and maintaining integrated management systems, conducting audits, developing training programs, and ensuring regulatory compliance. He holds multiple certifications in quality management, safety, auditing, and Lean Six Sigma.
Similar to Prdz_resume_march16 (20)
Prdz_resume_march16
- 1. Pedro O. Rodríguez Rivera Active TS/SCI Clearance since 2013 Urb. El Plantío Calle Ceiba L-10A Toa Baja, PR 00949 • 787-231-7690 • prodriguez.shpe@gmail.com Summary Mechanical engineer with experience in equipment maintenance and repair within a regulated environment, regulatory compliance, facility maintenance, FMEA, document control, supervision, energy savings and audit. EDUCATION Polytechnic University of Puerto Rico, San Juan, PR Campus March 2015 – Current Master of Science in Manufacturing Engineer, GPA: 4.00 Relevant Courses: • Advance Statistics • Operational Planning and Control Polytechnic University of Puerto Rico, San Juan, PR Campus March 2015 Bachelor of Science in Mechanical Engineer WORK EXPERIENCE Multi Air Services Engineers, Corp. September 2015 - Current Project Engineer • Developed an effective Building Maintenance schedule for a year in MS Project resulting in a 12% saving for the company. • Reviewed HVAC system technical specifications and generated quotation responses accordingly. • Created SOP’s and Maintenance checklist in accordance with manufacturer manual and customer requirements ensuring compliance with contract Scope of Work. • Modified a Quality Control Plan for projects and maintenance contracts. Prepared quality assurance, maintenance, pre and post work inspection checklist, SOPs to show maintenance compliance for JHACO standard. • Maintain all maintenance records for auditing and ensuring compliance with government contract and JHACO regulations. • Conducted non conformance investigation in HVAC system per each failed item in the QA checklist where CAPA method was used to prevent future equipment failures. • Supervise employees in day to day task. VA Healthcare Center, San Juan PR January 2015 – August 2015 Facility Operation Specialist Assistant • Developed a new project for the HVAC system involving the filters resulting in compliance with the Joint Commission standard (EC 02.05.01.8). • Conducted an Environment of Care quality inspection to ensure the facilities are suitable for the patient use and comfort. Create an ad hoc team to reduce time frame of work to a 33% and maintain accurate and complete documentation of the inspections results. • Supervised contractors in daily projects to assure quality compliance of contracts. • Participated in a FMEA analysis for high risk equipment to ensure its reliability for the facility resulting in an action guide to reduce the risk associated with the system. • Suggested the installation of a VFD unit for the mechanical pump to prolong the life of the equipment and energy saving. • Perform internal inventory quality audits. Created and updated the current CMMS to calculate the cost of machine breakdown repairs plus the PM versus the asset value to justify a possible replacement.
- 2. • Lead a team in the inspection of hospital policies to assure compliance with the Joint Commission Standards (EC 02.05.01). • Provided professional engineering support to various facility departments Air National Guard, Aguadilla PR September 2012 - Current Information Technology • Suggested an efficient way to transport sensitive equipment resulting in a 50% timeframe reduction in labor hour. • Broad knowledge and experience in Cisco Routers and switches. SKILLS ● Proficient in Microsoft Office, Project, Visio and data analysis software (Minitab, Matlab). ● Knowledge of FDA, GMP’s, JCAHO as well as ISO 9001 standards. ● Statistical Process Control ● Experience reading mechanical drawings. Extracurricular Activities ● Society of Hispanic Professional Engineers (SHPE) ● Venturing B.S.A Boys Scout of America. Certifications & Trainings ● Lean Six Sigma Yellow Belt Certified. ● Certification in Validations by CIAPR Knowledge in GMP, Risk Management Analysis Techniques, Utility Validations, Minitab, Process Cleaning and Cleaning Validation, Process Validation, Operational Excellence Tools, CAPA (Corrective Actions and Preventive Actions). ● 30hrs OSHA Certification in a CBT ● Security +