Ppt on ntpc dadri created vikas gujjar(IET lko)
•Download as PPTX, PDF•
2 likes•1,387 views
This document provides an overview of the NTPC Dadri power plant in India. It has a total generation capacity of 2642 MW from thermal, gas, and solar sources. The Dadri plant has several unique features, including being the largest gas station and dry ash handling plant in Asia. The document then describes the key components and processes within a thermal power plant, including the coal handling plant, boiler, turbine, generator, and ash handling plant. Block diagrams depict the overall power generation process from coal to electricity.
Report
Share
Report
Share
Recommended
NTPC,Dadri Training presentation
This document provides information about a presentation on summer training at the NTPC Dadri power plant. It discusses details about NTPC, including that it is India's largest power producer. It also provides specifics about the NTPC Dadri plant, including its total generation capacity of 2637 MW from coal and gas plants. The document then describes the various processes and equipment involved in thermal power generation, including coal handling, boiling, steam generation, power production via turbines and generators, and ash handling.
Summer training in NTPC ppt
This document provides a summary of a seminar on summer vocational training at NTPC thermal power plants. It discusses the key components of a thermal power plant including coal handling, pulverizing, boilers, turbines, generators, condensers, and ash handling. It also describes various equipment like ball mills used in pulverizing coal and control and instrumentation labs that monitor critical parameters. Finally, it lists some major thermal power plants in Rajasthan and references used in preparing the seminar.
Project Report on Industrial Summer Training at NTPC Simhadri
The following pdf is a Project Report about my Industrial Training at NTPC Limited Simhadri, Visakhapatnam, Andhra Pradesh, India. It includes all the fundamentals of a Thermal Power Plant: its layout, various departments, principal components etc. It also contains a brief profile about the company.
Industrial training report of thermal power plant
This document provides details from a student's industrial training report on boiler, turbine, and generator operation and maintenance at PPGCL power plant in India. It includes:
1. An introduction to the benefits of industrial training.
2. Vision, mission, targets, and challenges of PPGCL including increasing plant efficiency and facing local opposition during construction.
3. Descriptions of the basic Rankine power cycle, components and specifications of the plant's boiler, turbine, and generator systems.
4. Ways to increase plant efficiency such as lowering condenser pressure and increasing steam superheating and boiler pressure.
Ntpc vocational training project report sipat
This training report summarizes Pratik Gupta's vocational training at the SIPAT Super Thermal Power Project. It provides details on the production of electricity at a thermal power plant. Coal is ground and blown into boilers where it burns, heating water in tubes to produce high pressure steam. The steam powers turbines connected to generators, producing electricity. The steam is then condensed back into water in condensers to be reused in the cycle. The report outlines the key components and processes involved in electricity generation at a coal-fired thermal power station.
NPCIL RAWATBHATA PPT
This presentation summarizes information about nuclear power plants in India. It discusses the Nuclear Power Corporation of India Limited (NPCIL), which oversees nuclear power production. It then focuses on the Rajasthan Atomic Power Station near Rawatbhata, Rajasthan, which has 6 pressurized heavy water reactor units generating electricity. The presentation provides details on the nuclear fission process, reactor components like the calandria and fuel bundles, and the multiple barriers of protection for nuclear materials. It also discusses India's future energy needs and the benefits of expanding nuclear power.
VOCATIONAL TRAINING REPORT @ NTPC VINDHYACHAL
The document is a vocational training report submitted by Milind Punj to fulfill the requirements for a Bachelor of Technology degree in Electrical Engineering. It provides an overview of Milind's training at the NTPC Vindhyachal thermal power station located in Singrauli District, Madhya Pradesh, India. The report includes an acknowledgements section, introduction to NTPC Ltd and the NTPC Vindhyachal power plant, descriptions of the power generation process and basic plant components, and a conclusion. Milind conducted his training from May 15th to June 14th 2014 under the guidance of Mr. A. Markhedkar, focusing on various electrical and operational aspects of the thermal power station.
Training NTPC
The document provides information about Anil Jadon's industrial training at the NTPC power plant in Faridabad. It discusses the company NTPC, describes the Faridabad plant and its 432 MW capacity powered by natural gas. It explains the basic working of the power plant, from burning natural gas in the gas turbine to generating electricity. It also discusses the electrical systems, distribution of electricity, control and instrumentation, advantages of natural gas, and precautions taken at the plant. The training helped clear Anil's concepts and understand how electricity is generated at the large scale, efficient Faridabad plant.
Recommended
NTPC,Dadri Training presentation
This document provides information about a presentation on summer training at the NTPC Dadri power plant. It discusses details about NTPC, including that it is India's largest power producer. It also provides specifics about the NTPC Dadri plant, including its total generation capacity of 2637 MW from coal and gas plants. The document then describes the various processes and equipment involved in thermal power generation, including coal handling, boiling, steam generation, power production via turbines and generators, and ash handling.
Summer training in NTPC ppt
This document provides a summary of a seminar on summer vocational training at NTPC thermal power plants. It discusses the key components of a thermal power plant including coal handling, pulverizing, boilers, turbines, generators, condensers, and ash handling. It also describes various equipment like ball mills used in pulverizing coal and control and instrumentation labs that monitor critical parameters. Finally, it lists some major thermal power plants in Rajasthan and references used in preparing the seminar.
Project Report on Industrial Summer Training at NTPC Simhadri
The following pdf is a Project Report about my Industrial Training at NTPC Limited Simhadri, Visakhapatnam, Andhra Pradesh, India. It includes all the fundamentals of a Thermal Power Plant: its layout, various departments, principal components etc. It also contains a brief profile about the company.
Industrial training report of thermal power plant
This document provides details from a student's industrial training report on boiler, turbine, and generator operation and maintenance at PPGCL power plant in India. It includes:
1. An introduction to the benefits of industrial training.
2. Vision, mission, targets, and challenges of PPGCL including increasing plant efficiency and facing local opposition during construction.
3. Descriptions of the basic Rankine power cycle, components and specifications of the plant's boiler, turbine, and generator systems.
4. Ways to increase plant efficiency such as lowering condenser pressure and increasing steam superheating and boiler pressure.
Ntpc vocational training project report sipat
This training report summarizes Pratik Gupta's vocational training at the SIPAT Super Thermal Power Project. It provides details on the production of electricity at a thermal power plant. Coal is ground and blown into boilers where it burns, heating water in tubes to produce high pressure steam. The steam powers turbines connected to generators, producing electricity. The steam is then condensed back into water in condensers to be reused in the cycle. The report outlines the key components and processes involved in electricity generation at a coal-fired thermal power station.
NPCIL RAWATBHATA PPT
This presentation summarizes information about nuclear power plants in India. It discusses the Nuclear Power Corporation of India Limited (NPCIL), which oversees nuclear power production. It then focuses on the Rajasthan Atomic Power Station near Rawatbhata, Rajasthan, which has 6 pressurized heavy water reactor units generating electricity. The presentation provides details on the nuclear fission process, reactor components like the calandria and fuel bundles, and the multiple barriers of protection for nuclear materials. It also discusses India's future energy needs and the benefits of expanding nuclear power.
VOCATIONAL TRAINING REPORT @ NTPC VINDHYACHAL
The document is a vocational training report submitted by Milind Punj to fulfill the requirements for a Bachelor of Technology degree in Electrical Engineering. It provides an overview of Milind's training at the NTPC Vindhyachal thermal power station located in Singrauli District, Madhya Pradesh, India. The report includes an acknowledgements section, introduction to NTPC Ltd and the NTPC Vindhyachal power plant, descriptions of the power generation process and basic plant components, and a conclusion. Milind conducted his training from May 15th to June 14th 2014 under the guidance of Mr. A. Markhedkar, focusing on various electrical and operational aspects of the thermal power station.
Training NTPC
The document provides information about Anil Jadon's industrial training at the NTPC power plant in Faridabad. It discusses the company NTPC, describes the Faridabad plant and its 432 MW capacity powered by natural gas. It explains the basic working of the power plant, from burning natural gas in the gas turbine to generating electricity. It also discusses the electrical systems, distribution of electricity, control and instrumentation, advantages of natural gas, and precautions taken at the plant. The training helped clear Anil's concepts and understand how electricity is generated at the large scale, efficient Faridabad plant.
Thermal power plant
Thermal power plants generate electricity through the combustion of fuel to produce steam that drives a steam turbine which spins an electrical generator. The document discusses several key components and considerations for thermal power plants, including their need for large quantities of fuel (typically coal), water, and land for ash storage. It also outlines the basic energy conversion process from fuel to electricity and highlights some common components like boilers, turbines, condensers, and coal and ash handling systems. Locating thermal plants requires consideration of factors like fuel availability, water sources, and ash disposal.
Thermal power plant
Thermal power plants generate electricity by burning coal to produce steam that drives turbines connected to generators. They are a major source of electricity in many countries. In India, thermal power plants make up 75% of electricity generation. Coal is pulverized and burned in a boiler to heat water into steam. The high-pressure steam spins turbines that power generators to produce electricity. The steam is then condensed in a condenser using cooling water from cooling towers before being returned to the boiler as feedwater to repeat the process. While thermal plants provide reliable base-load power, they also produce significant air pollution and carbon emissions.
Power plant technology (lecture notes)
This document provides an overview of power plant technology. It introduces concepts in thermodynamics like forms of energy, the ideal gas law, and gas mixtures. It also outlines various power plant cycles like the Rankine cycle and components like boilers, turbines, and condensers. Additionally, it discusses other power plant types such as internal combustion, hydroelectric, gas turbine, and geothermal power plants. The document aims to give students a wide-ranging understanding of electrical energy production and power plant design principles and analysis using the SI system of units. It covers topics like fuels, combustion, cycles, plant equipment, and environmental aspects of power generation.
HYDRO POWER
Head
Water must fall from a higher elevation to a lower one to release its stored energy.
The difference between these elevations (the water levels in the forebay and the tailbay) is called head Dams:
three categories
high-head (800 or more feet)
medium-head (100 to 800 feet)
low-head (less than 100 feet)
Power is proportional to the product of head x flow
Modern thermal power plant
A thermal power plant uses steam to generate electricity. Coal is burned in a boiler to produce steam, which spins a turbine connected to a generator. The steam is then condensed in a condenser and recycled to the boiler to repeat the process. The main components are the boiler, turbine, generator, condenser and cooling system. Thermal power plants have the advantages of low cost and reliability but also have the disadvantage of air pollution from coal combustion.
Thermal power plant
Thermal power plants generate 75% of India's electricity and have an installed capacity of over 93,000 MW. They work by burning fuel to create steam that spins turbines connected to generators. The main components are the fuel handling unit, boiler, turbine, generator, and cooling system. Fuel is burned in the boiler to create high-pressure steam, which drives the turbine before being condensed into water and recirculated or discharged.
SUMMER Training report AT NTPC FOR INSTRUMENTATION (kbunl)
This document is a project report submitted by Sushant Kumar summarizing his one month vocational training at the Kanti Bijlee Utpadan Nigam Limited power plant. The report provides an overview of the plant's operations including the processes of generating electricity from coal, the main boiler and turbine components, and control systems used. It also describes the milling system for pulverizing coal and the light up process for initially igniting the coal furnace.
steam turbines presentation
This document provides an overview of steam turbine manufacturing at Bharat Heavy Electricals Limited (BHEL) Hyderabad. It discusses BHEL's main turbine types, the thermal power plant system, Rankine cycles, steam turbine components, compounding methods, and the manufacturing process for steam turbine blades at BHEL Hyderabad. The 201 Shop focuses on turbine manufacturing using various machine bays and production processes to fabricate turbine components from raw materials.
Thermal power plant
This PPT contains introduction and types of thermal power plants, WORKING PRINCIPLE, LAYOUT AND WORKING OF NUCLEAR POWER PLANT, WORKING PRINCIPLE OF COAL BASED POWER PLANT, SITE SELECTION OF THERMAL POWER PLANT,GENERAL LAYOUT AND WORKING OF COAL BASED THERMAL POWER PLANT, PRESENT STATUS OF COAL-FIRED THERMAL POWER PLANT, WASTE GENERATED IN THERMAL POWER PLANTS AND MANAGEMENT , TREATMENT AND DISPOSAL OF WASTE GENERATED IN THERMAL POWER PLANTS.
Thermal power plant
The document describes the key components and processes involved in a typical coal-fired thermal power plant, including the boiler, turbine, condenser, coal handling equipment, and other auxiliary systems. It also provides diagrams to illustrate the general layout and flow of energy conversion from coal to steam to mechanical power to electricity. Additionally, it briefly mentions some major thermal power plants located in the state of Rajasthan, India.
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It was submitted by an engineering student to their professor. The presentation covers the plant's coal handling system, boiler and auxiliary systems, turbine system, ash handling system, and off-site maintenance departments. It includes descriptions of the equipment used in coal handling, the boiler maintenance department, turbine maintenance, and ash handling. It also provides background on NTPC, the company that operates the plant, and details on the plant's layout and specifications.
Thermal power Plant presentation
This presentation summarizes information about the Thermal Power Station in Muzafargarh, Pakistan. The key points are:
- The power station has a total installed capacity of 1350 MW generated across 6 units powered by natural gas and furnace oil.
- It uses a Rankine cycle to generate steam from heated water to power turbines and generate electricity.
- The presentation describes the typical components and processes within a thermal power plant, including boilers, turbines, generators, and cooling systems.
- Muzafargarh power station is a major source of electricity in Pakistan's national grid and is operated by the Pakistan Electric Power Company.
Thermal power plant
Thermal power plants operate using the Rankine cycle. Water is heated into steam in a boiler using heat from burning fuel. The high-pressure steam drives turbines which are coupled to generators, producing electricity. The low-pressure exhaust steam from the turbines is condensed into water in a condenser, where it is pumped back into the boiler to repeat the cycle. Thermal power plants contribute the majority of electricity generation in India due to their ability to efficiently convert fuel into power on a large scale.
Report ON NTPC DADRI .BY ....EMAM
This document is a summer training project report submitted by Emam Raza, a student of mechanical engineering at KIET School of Engineering & Technology. The report details Raza's training at the NTPC Dadri power plant. It includes declarations by Raza, acknowledgements of those who assisted him, and sections on India's power sector, the National Thermal Power Corporation, and details about the NTPC Dadri plant such as its location, capacity, layout, and descriptions of the coal handling plant and mill sub-systems.
Turbine.
The document summarizes the operating principles and classifications of steam turbines. It discusses how steam turbines convert thermal energy from steam into mechanical energy by directing high velocity steam onto buckets attached to a rotating shaft. Steam turbines can be classified based on exhaust conditions, stage design, steam flow patterns, and number of stages. Condensing turbines exhaust steam to a condenser, while back pressure turbines maintain a higher exhaust pressure. Impulse turbines use nozzles to impart velocity on steam, while reaction turbines rely on expansion within buckets. Governors control steam flow to regulate turbine speed.
Power plant, Power Station and types of power plant
Power Plant or Power station? Do you know how electricity can be produced from different power plants and different prime energy sources. There are many types of power plants like - Thermal power plant, Nuclear power plant, Geothermal power plant, Bio gas power plant, Hydro power plant etc. From these power plants the prime moving energy source are different like - Heat, water, air, bio gas heat etc. Different components of power plants are described briefly which are the core of the electricity generation. A complete guidelines are provided regarding power or electricity.
STEAM POWER PLANT
INTRODUCTION
THERMODYNAMIC CYCLE OF STEAM FLOW
RANKINE CYCLE (IDEAL , ACTUAL ,REHEAT)
LAYOUT OF STEAM POWER PLANT
MAJOR COMPONENTS AND THEIR FUNCTIONS
ALTERNATOR
EXCITATION SYSTEM
GOVERNING SYSTEM
To study working of each component of hydro power plant?
This document describes the components and working of a hydroelectric power plant. It explains that potential energy from water stored behind a dam is converted to kinetic energy as the water flows through turbines, which spin generators to produce electricity. The main components are the dam, spillways, penstock, turbine, generator, and tailrace. Water is stored in a reservoir and regulated through gates and spillways before passing through a penstock to spin the turbine and generate electricity.
Nuclear power plant
This document provides an overview of nuclear power plants. It discusses nuclear fuel, the nuclear fission process, nuclear chain reactions, and the main components of a nuclear power plant such as the reactor, coolant, moderator, control rods, steam generators and turbines. It also describes the most common types of nuclear reactors - boiling water reactors, pressurized water reactors, fast breeder reactors and sodium-cooled reactors. The document then gives a brief history of nuclear power and discusses current nuclear power programs and reactors around the world. It concludes with sections on the advantages and disadvantages of nuclear power.
Ntpc dadri
this training report provides the knowledge about the generation of power from thermal energy of coal
Ntpc ppt complete
The document provides information about Vikas Kr. Singh's summer training at the NTPC power plant in Dadri. It discusses the key details of the power plant, including its installed capacity of 2642 MW from thermal, gas, and solar sources. It describes the basic working of the thermal power generation process, from coal handling to power generation in the turbine and generator. It also summarizes the functions of important components in the plant like the boiler, turbine, condenser, cooling tower, and switchyard equipment.
Ntpc dadri thermal power plant & switchyard
The document provides information about a summer training program at the NTPC power plant in Dadri, India. It discusses the installed capacity of the plant, which includes 1820 MW of thermal capacity and 817 MW of gas capacity. It then describes the various components and processes within the thermal power station, including the coal handling plant, boiler, turbine, condenser, cooling tower, and electrical equipment. It also provides a brief overview of the switchyard station and some of its key electrical components.
More Related Content
What's hot
Thermal power plant
Thermal power plants generate electricity through the combustion of fuel to produce steam that drives a steam turbine which spins an electrical generator. The document discusses several key components and considerations for thermal power plants, including their need for large quantities of fuel (typically coal), water, and land for ash storage. It also outlines the basic energy conversion process from fuel to electricity and highlights some common components like boilers, turbines, condensers, and coal and ash handling systems. Locating thermal plants requires consideration of factors like fuel availability, water sources, and ash disposal.
Thermal power plant
Thermal power plants generate electricity by burning coal to produce steam that drives turbines connected to generators. They are a major source of electricity in many countries. In India, thermal power plants make up 75% of electricity generation. Coal is pulverized and burned in a boiler to heat water into steam. The high-pressure steam spins turbines that power generators to produce electricity. The steam is then condensed in a condenser using cooling water from cooling towers before being returned to the boiler as feedwater to repeat the process. While thermal plants provide reliable base-load power, they also produce significant air pollution and carbon emissions.
Power plant technology (lecture notes)
This document provides an overview of power plant technology. It introduces concepts in thermodynamics like forms of energy, the ideal gas law, and gas mixtures. It also outlines various power plant cycles like the Rankine cycle and components like boilers, turbines, and condensers. Additionally, it discusses other power plant types such as internal combustion, hydroelectric, gas turbine, and geothermal power plants. The document aims to give students a wide-ranging understanding of electrical energy production and power plant design principles and analysis using the SI system of units. It covers topics like fuels, combustion, cycles, plant equipment, and environmental aspects of power generation.
HYDRO POWER
Head
Water must fall from a higher elevation to a lower one to release its stored energy.
The difference between these elevations (the water levels in the forebay and the tailbay) is called head Dams:
three categories
high-head (800 or more feet)
medium-head (100 to 800 feet)
low-head (less than 100 feet)
Power is proportional to the product of head x flow
Modern thermal power plant
A thermal power plant uses steam to generate electricity. Coal is burned in a boiler to produce steam, which spins a turbine connected to a generator. The steam is then condensed in a condenser and recycled to the boiler to repeat the process. The main components are the boiler, turbine, generator, condenser and cooling system. Thermal power plants have the advantages of low cost and reliability but also have the disadvantage of air pollution from coal combustion.
Thermal power plant
Thermal power plants generate 75% of India's electricity and have an installed capacity of over 93,000 MW. They work by burning fuel to create steam that spins turbines connected to generators. The main components are the fuel handling unit, boiler, turbine, generator, and cooling system. Fuel is burned in the boiler to create high-pressure steam, which drives the turbine before being condensed into water and recirculated or discharged.
SUMMER Training report AT NTPC FOR INSTRUMENTATION (kbunl)
This document is a project report submitted by Sushant Kumar summarizing his one month vocational training at the Kanti Bijlee Utpadan Nigam Limited power plant. The report provides an overview of the plant's operations including the processes of generating electricity from coal, the main boiler and turbine components, and control systems used. It also describes the milling system for pulverizing coal and the light up process for initially igniting the coal furnace.
steam turbines presentation
This document provides an overview of steam turbine manufacturing at Bharat Heavy Electricals Limited (BHEL) Hyderabad. It discusses BHEL's main turbine types, the thermal power plant system, Rankine cycles, steam turbine components, compounding methods, and the manufacturing process for steam turbine blades at BHEL Hyderabad. The 201 Shop focuses on turbine manufacturing using various machine bays and production processes to fabricate turbine components from raw materials.
Thermal power plant
This PPT contains introduction and types of thermal power plants, WORKING PRINCIPLE, LAYOUT AND WORKING OF NUCLEAR POWER PLANT, WORKING PRINCIPLE OF COAL BASED POWER PLANT, SITE SELECTION OF THERMAL POWER PLANT,GENERAL LAYOUT AND WORKING OF COAL BASED THERMAL POWER PLANT, PRESENT STATUS OF COAL-FIRED THERMAL POWER PLANT, WASTE GENERATED IN THERMAL POWER PLANTS AND MANAGEMENT , TREATMENT AND DISPOSAL OF WASTE GENERATED IN THERMAL POWER PLANTS.
Thermal power plant
The document describes the key components and processes involved in a typical coal-fired thermal power plant, including the boiler, turbine, condenser, coal handling equipment, and other auxiliary systems. It also provides diagrams to illustrate the general layout and flow of energy conversion from coal to steam to mechanical power to electricity. Additionally, it briefly mentions some major thermal power plants located in the state of Rajasthan, India.
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It was submitted by an engineering student to their professor. The presentation covers the plant's coal handling system, boiler and auxiliary systems, turbine system, ash handling system, and off-site maintenance departments. It includes descriptions of the equipment used in coal handling, the boiler maintenance department, turbine maintenance, and ash handling. It also provides background on NTPC, the company that operates the plant, and details on the plant's layout and specifications.
Thermal power Plant presentation
This presentation summarizes information about the Thermal Power Station in Muzafargarh, Pakistan. The key points are:
- The power station has a total installed capacity of 1350 MW generated across 6 units powered by natural gas and furnace oil.
- It uses a Rankine cycle to generate steam from heated water to power turbines and generate electricity.
- The presentation describes the typical components and processes within a thermal power plant, including boilers, turbines, generators, and cooling systems.
- Muzafargarh power station is a major source of electricity in Pakistan's national grid and is operated by the Pakistan Electric Power Company.
Thermal power plant
Thermal power plants operate using the Rankine cycle. Water is heated into steam in a boiler using heat from burning fuel. The high-pressure steam drives turbines which are coupled to generators, producing electricity. The low-pressure exhaust steam from the turbines is condensed into water in a condenser, where it is pumped back into the boiler to repeat the cycle. Thermal power plants contribute the majority of electricity generation in India due to their ability to efficiently convert fuel into power on a large scale.
Report ON NTPC DADRI .BY ....EMAM
This document is a summer training project report submitted by Emam Raza, a student of mechanical engineering at KIET School of Engineering & Technology. The report details Raza's training at the NTPC Dadri power plant. It includes declarations by Raza, acknowledgements of those who assisted him, and sections on India's power sector, the National Thermal Power Corporation, and details about the NTPC Dadri plant such as its location, capacity, layout, and descriptions of the coal handling plant and mill sub-systems.
Turbine.
The document summarizes the operating principles and classifications of steam turbines. It discusses how steam turbines convert thermal energy from steam into mechanical energy by directing high velocity steam onto buckets attached to a rotating shaft. Steam turbines can be classified based on exhaust conditions, stage design, steam flow patterns, and number of stages. Condensing turbines exhaust steam to a condenser, while back pressure turbines maintain a higher exhaust pressure. Impulse turbines use nozzles to impart velocity on steam, while reaction turbines rely on expansion within buckets. Governors control steam flow to regulate turbine speed.
Power plant, Power Station and types of power plant
Power Plant or Power station? Do you know how electricity can be produced from different power plants and different prime energy sources. There are many types of power plants like - Thermal power plant, Nuclear power plant, Geothermal power plant, Bio gas power plant, Hydro power plant etc. From these power plants the prime moving energy source are different like - Heat, water, air, bio gas heat etc. Different components of power plants are described briefly which are the core of the electricity generation. A complete guidelines are provided regarding power or electricity.
STEAM POWER PLANT
INTRODUCTION
THERMODYNAMIC CYCLE OF STEAM FLOW
RANKINE CYCLE (IDEAL , ACTUAL ,REHEAT)
LAYOUT OF STEAM POWER PLANT
MAJOR COMPONENTS AND THEIR FUNCTIONS
ALTERNATOR
EXCITATION SYSTEM
GOVERNING SYSTEM
To study working of each component of hydro power plant?
This document describes the components and working of a hydroelectric power plant. It explains that potential energy from water stored behind a dam is converted to kinetic energy as the water flows through turbines, which spin generators to produce electricity. The main components are the dam, spillways, penstock, turbine, generator, and tailrace. Water is stored in a reservoir and regulated through gates and spillways before passing through a penstock to spin the turbine and generate electricity.
Nuclear power plant
This document provides an overview of nuclear power plants. It discusses nuclear fuel, the nuclear fission process, nuclear chain reactions, and the main components of a nuclear power plant such as the reactor, coolant, moderator, control rods, steam generators and turbines. It also describes the most common types of nuclear reactors - boiling water reactors, pressurized water reactors, fast breeder reactors and sodium-cooled reactors. The document then gives a brief history of nuclear power and discusses current nuclear power programs and reactors around the world. It concludes with sections on the advantages and disadvantages of nuclear power.
Ntpc dadri
this training report provides the knowledge about the generation of power from thermal energy of coal
What's hot (20)
SUMMER Training report AT NTPC FOR INSTRUMENTATION (kbunl)
SUMMER Training report AT NTPC FOR INSTRUMENTATION (kbunl)
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
Power plant, Power Station and types of power plant
Power plant, Power Station and types of power plant
To study working of each component of hydro power plant?
To study working of each component of hydro power plant?
Similar to Ppt on ntpc dadri created vikas gujjar(IET lko)
Ntpc ppt complete
The document provides information about Vikas Kr. Singh's summer training at the NTPC power plant in Dadri. It discusses the key details of the power plant, including its installed capacity of 2642 MW from thermal, gas, and solar sources. It describes the basic working of the thermal power generation process, from coal handling to power generation in the turbine and generator. It also summarizes the functions of important components in the plant like the boiler, turbine, condenser, cooling tower, and switchyard equipment.
Ntpc dadri thermal power plant & switchyard
The document provides information about a summer training program at the NTPC power plant in Dadri, India. It discusses the installed capacity of the plant, which includes 1820 MW of thermal capacity and 817 MW of gas capacity. It then describes the various components and processes within the thermal power station, including the coal handling plant, boiler, turbine, condenser, cooling tower, and electrical equipment. It also provides a brief overview of the switchyard station and some of its key electrical components.
Thermal Power Plant PPT
The document provides information about the Indira Gandhi Thermal Power Plant located in Jharli, Jhajjar, Haryana. It is a 3x500MW coal-based thermal power plant established on 2,191 acres of land by Aravali Power Company Private Limited. The plant uses a steam turbine generator process to convert the thermal energy of coal into electrical energy, which is then transmitted through a 400kV transmission system. It describes the key components of a thermal power plant including the boiler, turbine, generator, condenser, and coal and ash handling systems.
Harsh ntpc
NTPC Dadri power plant has an installed capacity of 2642 MW including 1820 MW from thermal units and 817 MW from gas units. It sources coal from Piparwara mine in Jharkhand and water from Upper Ganga Canal. The basic processes include coal handling, combustion in boilers to produce steam, steam passing through turbines to generate electricity, and condensation of steam in condensers. Key components are coal handling plant, boilers, turbines, condensers, cooling towers, ESPs for emissions control, and chimney. Fly ash is a byproduct that is used in construction materials.
Ntpc2
The document provides information about the generation of thermal power at NTPC Dadri power plant. It discusses how coal is burned in boilers to generate high pressure steam which is used to spin turbines connected to generators to produce electricity. The key components of the thermal power plant discussed are the boiler, turbine, condenser, cooling towers and electrical equipment like transformers. It also describes the coal handling process and techniques used to handle ash waste from coal combustion like electrostatic precipitators.
Attachment.doc
1. The document provides an acknowledgement and thanks to various individuals and departments at NTPC Tanda for allowing the training and providing support and knowledge.
2. It then outlines the content which will be covered, including a brief description of the Tanda thermal project, production of electricity, description of the thermal plant, basic cycle of a power plant, control and instrumentation unit, and important equipment of the plant.
3. It begins describing the Tanda thermal project, providing its geographical location, features such as its installed capacity and suppliers, and performance metrics like its designed boiler efficiency.
Kota super thermal power plant
The document summarizes the training seminar on the Kota Super Thermal Power Station. It describes the power station's establishment in 1973 with initial capacity of 220 MW expanding to 1240 MW currently. It details the main components of the plant including the coal handling plant, boiler, superheater, steam turbine, generator, cooling system, and ash handling plant. The layout and functioning of each component is briefly explained.
Emam training
The document provides information about Emam Raza's summer training experience at the National Thermal Power Plant in Dadri, India. It discusses details about NTPC such as its installed capacity, power stations, and awards. It then focuses on the Dadri power plant, describing its total capacity and the types of power generation. The rest of the document outlines the basic processes involved in a thermal power plant, including coal handling, steam generation in boilers, steam expansion in turbines, and electricity generation. It also describes various equipment used such as pulverizers, superheaters, condensers, and cooling towers.
ppt of ntpc dadri by emam raza khan
The document provides information about Emam Raza's summer training experience at the National Thermal Power Plant in Dadri, India. It discusses the key aspects of the power plant including its capacity of 2642 MW from thermal, gas, and solar sources. It describes the basic processes involved in electricity generation from coal including the coal handling system, boiler, turbine, condenser, and other important equipment. The document also provides details about NTPC as a company, the transportation and characteristics of coal used at the plant, working of various sections, and uses of coal ash.
Ppt on btps bokaro industrial training
The document summarizes the Bokaro Thermal Power Station located in Jharkhand, India. It has three units that generate a total of 630 MW of power. The power station uses coal as its fuel source, which is handled through a coal handling plant and crushed before being fired in the boiler. The boiler then heats water to create high-pressure steam, which spins turbines connected to generators to produce electricity. The steam is reused in the process by passing through a superheater, economizer and condenser before being treated and reused. Ash is removed using an electrostatic precipitator and handled separately. A control room monitors and regulates the entire power generation process.
MTPS Bappa main
The document provides an overview of the Mejia Thermal Power Station (MTPS) in West Bengal, India. It discusses the technical specifications of the power station, including its total installed capacity of 2340MW generated across 8 units. It then summarizes the key components and processes within a thermal power plant, including the steam turbine, boiler system, coal handling plant, water treatment plant, and electrical operations like the generator and transformers. The document concludes by thanking those involved in the vocational training program at MTPS.
Kota super thermal power plant seminar
The document summarizes the layout and components of the Kota Super Thermal Power Station, a power plant located in Kota, India. It consists of 7 units with a total generation capacity of 1240 MW. The main parts of the plant include the coal handling plant, boiler, superheater, steam turbine, generator, generating transformer, and cooling system. The coal handling plant processes and conveys coal to the furnace. Steam is generated in the boiler and superheated before powering the steam turbine, which drives the generator to produce electricity.
Thermal Electric Power Generation Technology_Coal Fired/Fossil Fuel
This document provides an overview of how a thermal electric power plant operates. It explains that coal is burned in a boiler to produce high pressure steam, which is then used to spin a turbine and generate mechanical power. An alternator converts this mechanical power into electrical power. The key components of the plant are described in detail, including the coal handling system, pulverizer, boiler, turbine, condenser, cooling towers, and other auxiliary equipment. The document also discusses the energy conversion process from chemical to thermal to mechanical to electrical energy.
Coal Base Thermal Power Plant
A thermal power plant converts the heat energy from burning coal into electrical energy. Coal is burned in a boiler to produce steam, which spins turbines connected to generators. Thermal power plants account for over 75% of India's total power generation. Key components include the coal handling plant, boiler, turbine, condenser, and cooling system. The steam produced spins the turbine which is connected to the generator, producing electricity that is stepped up and transmitted via transformers.
Raj WestPower Limited (JSW Energy Limited)
This document provides an overview of a seminar on training at Raj WestPower Limited (RWPL), an 8 x 135 MW lignite-based thermal power plant in Bhadresh, Rajasthan owned by JSW Energy Limited. It introduces RWPL, noting that it uses lignite coal from nearby mines and water from the Indra Gandhi Nahar Pariyojana canal. The document then describes the basic components and processes of a thermal power plant, including the boiler, turbine, generator, and the Rankine cycle. It provides details on the specific boiler, turbine, and generator equipment supplied by Dongfong Electric Corporation for this plant.
compalete file 2023 (AutoRecovered).docx
This document provides an overview of the processes involved in a thermal power plant. It begins by explaining that thermal power plants convert chemical energy stored in fuels like coal into heat energy and then electrical energy. It describes the basic energy conversions that occur in the boiler, turbine and generator. It then provides specific details about the Kalisindh Thermal Power Plant in Jhalawar, India, including its location, capacity and land acquisition. The document outlines the basic systems and processes within a thermal power plant, including coal handling, steam generation, power generation via turbines and generators, and electrical transmission. It provides diagrams illustrating the Rankine cycle and process flow within the plant.
Mejia Thermal power Station(Seminar)
The document provides an overview of the Mejia Thermal Power Station located in West Bengal, India. It discusses the key components and processes involved in generating power at the plant, including:
- Coal handling and storage before being pulverized and fed into boilers to produce steam.
- Water tube boilers that convert the steam's thermal energy into rotational energy via turbines connected to generators.
- Condensers that condense the steam back into water and cooling towers that cool the water for reuse.
- Auxiliary equipment like transformers, switchyards, and protection systems.
- The plant has a total installed capacity of 2320 MW produced across multiple units.
Kota thermal power plant ppt
The Kota Super Thermal Power Station is a 1240MW coal power plant located in Kota, Rajasthan. It uses a steam turbine generator system fueled by coal. Coal is transported via a conveyor system to the boiler, where it is burned to produce steam that drives the turbine generator. The steam is then condensed in condensers using cooling water from the Chambal River. Fly ash from combustion is captured and can be used for products like cement or road construction. The power station began operating in 1983 and has since expanded in stages to its current capacity.
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...
A thermal power station is a power plant in which the prime mover is steam driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator. After it passes through the turbine, the steam is condensed in a condenser and recycled to where it was heated; this is known as a Rankine cycle. The greatest variation in the design of thermal power stations is due to the different fossil fuel resources generally used to heat the water. Some prefer to use the term energy center because such facilities convert forms of heat energy into electrical energy.[1] Certain thermal power plants also are designed to produce heat energy for industrial purposes of district heating, or desalination of water, in addition to generating electrical power. Globally, fossil fueled thermal power plants produce a large part of man-made CO2 emissions to the atmosphere, and efforts to reduce these are varied and widespread.
For Video on Themal Power Plant (Animated Working Video) :- https://www.youtube.com/watch?v=ouWOhk1INjo
Subscribe To Our Youtube Channel For More Videos:-
https://www.youtube.com/TheEngineeringScienc
Click Here To Subscribe:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1
Thermal power plant from A.I.C.E Jaipur
The document is a seminar presentation on thermal power plants. It discusses the classification, layout, components and working of thermal power plants. The main components discussed are the coal handling plant, pulverizing plant, boiler, turbine, condenser, cooling tower, feedwater heater and economizer. Thermal power plants in Rajasthan like Kota, Suratgarh, Giral, Chhabra and Kalisindh are also summarized along with their installed capacities and commissioning details. Advantages, limitations and site selection parameters for thermal plants are also highlighted.
Similar to Ppt on ntpc dadri created vikas gujjar(IET lko) (20)
Thermal Electric Power Generation Technology_Coal Fired/Fossil Fuel
Thermal Electric Power Generation Technology_Coal Fired/Fossil Fuel
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...
Recently uploaded
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Recently uploaded (20)
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Ppt on ntpc dadri created vikas gujjar(IET lko)
- 1. PRESENTED BY- VIKAS EI- 4TH YEAR 1205232912
- 2. NTPC DADRI AT GLANCE UNIQUE FEATURES OF NTPC DADRI INTRODUCTION TO THERMAL POWER PLANT BLOCK DIAGRAM OF THERMAL POWER GENERATION INTRODUCTION TO COAL HANDLING PLANT BOILER SECTION TURBINE SECTION GENERATION SECTION ASH HANDLING PLANT
- 3. TOTAL CAPACITY OF DADRI POWER PLANT :- (A) THERMAL I) 04X210 MW = 840 MW II) 02X490 MW = 980 MW TOTAL = 1820 MW (B) GAS = 817 MW (C) SOLAR = 05 MW GRAND TOTAL= 2642 MW
- 4. Largest gas station in the country (Operated by central govt in western region) Largest dry ash handling plant in Asia (Dry ash disposal technique) Only power station in the country housing both coal based and gas based units Largest switchyard in country with power handling capacity of 5300 MW
- 5. Some Prefer to use the term as Energy Centre. A Thermal Power station consist of all equipment and subsystem required to produce electricity. It uses a steam generating boiler fired with fossil fuels to drive an electric generator. It convert a form of energy like nuclear energy, gravitational potential energy or heat energy into electric energy.
- 6. BLOCK DIAGRAM OF POWER GENERATION Water Boiler Steam Turbine Generator Ash coal
- 7. Following are the sections of a coal based thermal power plant: Coal handling plant Boiler section Turbine section Generator section Transmission and distribution Ash handling plant
- 8. Section of the power plant which takes care of the required coal in the plant. Coal handling plant is automatic feeding of coal to the boiler furnace. It consists of the following components: Coal wagons Coal conveyer Coal bunkers Coal pulveriser
- 9. It is responsible to convert the water into steam. It is consist of following parts:
- 11. 210 MW Boiler: Water and Steam Circuit Platen SH. 375C-425C Final SH. 500-540C LTSH 330-375C Economizer 240-310C Water Wall 310C
- 12. Atmospheric air is heated in the air pre-heaters Water passes through Deaerator for removal of dissolved gases. then through feed water heater, then from the boiler feed pump passes through economizer and reaches the boiler drum. Due to heat and density difference the water rises up in the water wall tubes. Water is partly converted into steam as it rises up in the furnace. This steam and water mixture is again taken to the boiler drum, where the steam is separated from water. Flue gases from the furnace are extracted by induced draft fan.
- 13. BOTTOM RNG HDR & Z-PANEL 1ST PASS W.W 1ST PASS W.W O/L HDRS ROOF I/L HEADER 2ND PASS UPPER C-HDR 2nd PASS LOWER C-HDRS LTSH I/L HEADER LTSH O/L HEADER D.P.I/L HEADER D.P.O/L HEADER S.H. HEADER R.H.HEADER 2ND PASS ROOF O/L HDR(REAR ECONOMISER M.S H.R. H C.R.H FROM F.R.S
- 14. It is use to convert the steam to mechanical power. It consist of the following components: Steam Turbine-used to convert steam to mechanical power and drives the Generator. Control Valves- used to control operating conditions such as temperature, pressure, flow etc. Re-heaters-used to pickup more energy to go drive intermediate or lower pressure turbines. Condenser-used condensing the steam exhausted from turbine so that this water can be reused.
- 15. This is used to convert the mechanical power to electrical power. It consists of following components: Generator-used to convert mechanical energy to electrical energy. Demineralised water- it is the pure form of water which don’t contain any sort of mineral.
- 16. It takes care of the ash generated due to the combustion of coal. The percentage of ash in the coal varies from about5% to 40%. Power plants generally use average or poor quality coal . A modern 2000MW plant produces 5000 tons of ash daily. As a result of this the ash produced by a plant is pretty large.